The sensors do not work. - LeEco Le1 Pro Questions & Answers

Hi, I got big problem with the sensors. All sensors work only few seconds and getting freezing until the phone restarts.
It only happens when I start using gyroscope. By this problem using vr become impossible. Please help me.

To restore sensors try this if you are root:
Delete folder /data/system/sensors
And /data/misc/sensors
And delete file /persist/sensors/sns.reg
Restart
Then it should work

Related

[Q] Problem with the loudspeaker

Hello
I have unlock and root my phone.
In the beginning everything was OK, but when I have try to change my ringtone the phone have freeze and after that is restarting.
I have the same problem if I try to start the iGo software - it starts, but on the first window where I have to select the language it freeze and restart after that.
The same problem if I try to look some movie in internet!
I have made a test with the HTC test program and have find out that every time when the loudspeaker is involved the phone is restarting!
Some ideas?

[Q] No GPS after update to 1.6

Hi all,
last week I Updated to Fairphone 1.6 and since this date I can't get a GPS fix. I tried to load EPO files but the download didn't work. I also reseted the A-GPS data and redownloaded it with GPS-Status. But even after one hour of jogging the Fairphone didn't had a GPS fix. Did anyone have an idea what to do?
I'm using XPrivacy but RunKeeper and GPS-Status are not restricted by it.
Has nobody issues with GPS after the update?
So some new Info.
I tried several ways to get the GPS running.
The current situation is that yesterday I got a fix with 8 satellites after I did this steps:
http://fix-my-gps.blogspot.de/
Then only step I did not made was the last run to install the app as background service.
One hour later I tried to get a GPS fix using GPS Status. But even after one hour of walking outside with the phone in my pocket I had no GPS lock.
Today I tried the tutorial of http://fix-my-gps.blogspot.de/ again. But I have no success anymore. But this evening I started GPS Status and waited for about half an hour and then the phone have had a lock with 4 satellites. But this lock was really unstable. In the moment when i picked up the phone from the table where it was laying it lost the GPS Lock and did not managed to get it back.
Than I downloaded the epo files from mediatek using my pc and copying the EPO.BIN and EPO.MD5 to /data/misc and did a chmod 777 for the files.
The phone recognized the EPO files but I don't get a GPS lock.
So in short the GPS is not completely nonfunctional but it seems to be very hard to get a lock and this wasn’t before I updated to 1.6.
So in short what did I do during trying to fix the GPS.
Deleted the mtkpgs.dat in /data/misc REBOOT
Nothing happened so restored my mtkpgs.dat.
Used FasterGPS to set the NTP server to the right one for me.
Used Engineer Mode to download EPO and restart AGPS (EPO download always failed, so downloaded files via PC....)
Did a HOT, FULL, AGPS Restart via YGPS.
And I recognized that sometimes I can't start YGPS using the Engineering Mode because the YGPS is grayed out. When I then start Titanium backup it told me that YGPS is no longer installed on my phone. So I recovered it with titanium. But after one reboot it is gone again...
Yes I know I could do a hard reset and then check if GPS is working again correctly but as I know that GPS worked normally before the software update I think it have to be a software issue and I'm not a friend of doing a hard reset when something don't work because so you never will know why something don't work. (You don't buy a new car only because your current car has periodic missfirings )
So if anyone have an idea I would appreciate your help.
JYPDWhite said:
So some new Info.
I tried several ways to get the GPS running.
The current situation is that yesterday I got a fix with 8 satellites after I did this steps:
http://fix-my-gps.blogspot.de/
Then only step I did not made was the last run to install the app as background service.
One hour later I tried to get a GPS fix using GPS Status. But even after one hour of walking outside with the phone in my pocket I had no GPS lock.
Today I tried the tutorial of http://fix-my-gps.blogspot.de/ again. But I have no success anymore. But this evening I started GPS Status and waited for about half an hour and then the phone have had a lock with 4 satellites. But this lock was really unstable. In the moment when i picked up the phone from the table where it was laying it lost the GPS Lock and did not managed to get it back.
Than I downloaded the epo files from mediatek using my pc and copying the EPO.BIN and EPO.MD5 to /data/misc and did a chmod 777 for the files.
The phone recognized the EPO files but I don't get a GPS lock.
So in short the GPS is not completely nonfunctional but it seems to be very hard to get a lock and this wasn’t before I updated to 1.6.
So in short what did I do during trying to fix the GPS.
Deleted the mtkpgs.dat in /data/misc REBOOT
Nothing happened so restored my mtkpgs.dat.
Used FasterGPS to set the NTP server to the right one for me.
Used Engineer Mode to download EPO and restart AGPS (EPO download always failed, so downloaded files via PC....)
Did a HOT, FULL, AGPS Restart via YGPS.
And I recognized that sometimes I can't start YGPS using the Engineering Mode because the YGPS is grayed out. When I then start Titanium backup it told me that YGPS is no longer installed on my phone. So I recovered it with titanium. But after one reboot it is gone again...
Yes I know I could do a hard reset and then check if GPS is working again correctly but as I know that GPS worked normally before the software update I think it have to be a software issue and I'm not a friend of doing a hard reset when something don't work because so you never will know why something don't work. (You don't buy a new car only because your current car has periodic missfirings )
So if anyone have an idea I would appreciate your help.
Click to expand...
Click to collapse
Hi,
You are the only one having these problems I assume some software error and think best is to try a flash the whole phone.
So,
i did a reflash now. Will try the GPS tomorrow.
Ok hey everyone
Today I tried the GPS At first it don't work (no fix after 15 Minutes of going by bike). After that I copied the EPO data that I downloaded from mediatek FTP server (valid until tomorrow) and after that I have a fix. I will try it tomorrow again but I think GPS is working now but I would be very interessted what was wrong with my phone before I did the reflash. The only difference now is that I did the reflash with the unified storage system now. After that I recovered my complete apps (no system apps) with Titanium backup.

Camera not working with scanner applications

Camera makes photos normally. But if i run apllications for scanning ( CamScanner, Genius Scan, FastScanner from Google Play) my camera freeze. I want make PDF file from document, i take a first photo and Elephome p8000 freeze. I must restart phone. Does sameone to help me ? Thanks.
Hi,
it's a common problem on the 25/07 firmware. Updating to the 15/08 will fix it.
updating not working.
I want to updating STOCK ROM from 20150725 to 20150907. I follow the instructions http://forum.xda-developers.com/ele...t/print-prev-thread-thread-stock-rom-t3196251 but if i press in flashtool "Download" and i connect elephone to computer, computer does nothing and smartophone does nothing too. Please help.

F500S doesn’t have sound after fixing Bootloop

Hi all, I have a G4 F500S (Korea), I have “Infinite loop Auto power off” error and have to back to Android 5.1 using file TOT here: https://forum.xda-developers.com/g4/general/tot-lg-g4-korean-f500l-tot-flash-files-t3294417
After that, I upgrade to the fixing problem of H815 to turn off 2 CPU A57 in here(#975): https://forum.xda-developers.com/g4/help/lg-g4-stuck-bootloop-t3268734/page98
Yes, and it could start, everything seems to be ok until I recheck and know that my phone totally doesn’t have any sound (ringtone, audio, video). I have tried to playing video on youtube and got error immediately ( undefined error) as well as Facebook, I have opened the record function but also got the “Audio recording problem” . I have also tried Reset All Data but it couldn’t solve the problem. Hope that you guys can help me to fix this one.
P/s: my mobile has been root so it is possible to do something with the system

Need the persist.img from device with working sensors

I don't know how, but persist partition apparently got damaged in my device after installing of custom ROM. So would anybody dump that partition and send to me?
Here is the way you can get it: boot into TWRP -> Advanced -> Terminal (or in rooted adb shell) run "dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img". The .img file will emerge in your root directory.
Upd: flashing other device's persist.img can't solve my problem, so I really don't know what to do
By the way my problem is missing of all sensors data (accelerometer, light sensor, proximity sensor...) after installing Pixel Dust ROM. I have flashed stock Q and P firmwares by several times, but it made no changes. However my persist partition looks fine to compare the one from device with working sensors
You can't just take someones persist. How do you know it's not hardware damage since sensors can fail after all? if you use someones persist, your using all their unique data. Have you tried downgrading to Android 9?
djared704 said:
You can't just take someones persist. How do you know it's not hardware damage since sensors can fail after all? if you use someones persist, your using all their unique data. Have you tried downgrading to Android 9?
Click to expand...
Click to collapse
Yes, I tried to downgrade to Pie, even to stock 7.1.2 image, but it still not got any use. And the strange fact is, that sometimes I can get data from proximity, light and pressure sensors, but it can suddenly disappear during one up time (I mean between reboots), and it means what at least two modules responsible for that sensors (TMD4903 and BMP2805) still can work fine... I guess
I assume, that weird behaviour can be related to some data which keeps untouchable during wipes or any firmware upgrade. Some data like PIN or something, and it were corrupted

Categories

Resources