Related
Hello,
As Google has decided to turn encryption on as a standard in the upcoming Android 5.0, I thought I would give it a test on my CosmicCM 5.4.
I started the encryption and it prompts you that you for a passcode that will be used from now on, so far no problem.
It started encrypting my device and it was running for some time(I left it alone for an hour) and reboots a couple of times.
After he's finished the annoyance came.
first you will have to type twice your password with a reboot, one time do decrypt your device the second time to enter your device.
Be aware that performance can be slowed through encryption, and it can negatively impact battery life too.
So I decide to go back.
The Problem: Once encrypted, you can't decrypt it easily.
When encrypting the phone android will tell you you can only decrypt it using a factory reset. Naturally you assume it's talking about the "Factory Data Reset" option found in Settings --> Backup and Reset and this works.
Now I wanted to try a rom (TW 4.2.2 based) and see how this worked and after installing and booting.
I got prompted to enter the decryption and of course this didn’t work anymore as there is no data for the password.
So I assumed you can wipe everything from your custom recovery mod (CWM, TWRP, or one of those).
Wrong! You'll get beautiful "can't mount /data" messages and more.
After some hard time I got everything working again, by flashing CosmicCM again.
The phone booted al clean again without asking for encryption and when you check the menu it also mentioned encryption is deactivated.
Trying the previous rom again just triggerd the encryption again.
So It seems that there is still somewhere a hidden encrypted protection that will be activated when I flash a different rom.
So be warned and don’t play with encrypting your device as you could brick it.
Didn't have time to investigate further on how I can remove it completely, but my guess is I have to redo all the partitions.
I was on the same boat a month ago
akiratoriyama said:
I was on the same boat a month ago
Click to expand...
Click to collapse
I wish you told me sooner
Did you redo all the partitions to get the encryption completely removed?
RichyE said:
I wish you told me sooner
Did you redo all the partitions to get the encryption completely removed?
Click to expand...
Click to collapse
I think I had to wipe my data via Philz, CWM and stock to remove encryption.
akiratoriyama said:
I think I had to wipe my data via Philz, CWM and stock to remove encryption.
Click to expand...
Click to collapse
Thanks for the info, will try to flash stock this week and see if this helps
Has anyone noticed any issue on their h815 with regards to encrypting the phone? Mine does not work; full or quick option. Has unlocking the bootloader caused this to stop working? I have got root and twrp recovery. Could the custom recovery be causing the phone to get stuck on rebooting to encrypt? The lg website says certain features no longer work after the bootloader is unlocked; maybe this is one of those? All just guess work atm, any help would be appreciated.
v1ne said:
Has anyone noticed any issue on their h815 with regards to encrypting the phone? Mine does not work; full or quick option. Has unlocking the bootloader caused this to stop working? I have got root and twrp recovery. Could the custom recovery be causing the phone to get stuck on rebooting to encrypt? The lg website says certain features no longer work after the bootloader is unlocked; maybe this is one of those? All just guess work atm, any help would be appreciated.
Click to expand...
Click to collapse
Hi,
i do not know, as I do NOT (yet?) own the device! But I would love to know! Any unlocked + encrypted phones out there? I would be interested how many of the geeks around here encrypt their phones?
For me, these days, I do not own a single device (PC, Notebook, Smartphone whatever) that is NOT encrypted. The more easy you loose the device, the more encryption should be a standard.
What is the reality? And does it work with the unlocked bootloader?
v1ne said:
I have got root and twrp recovery. Could the custom recovery be causing the phone to get stuck on rebooting to encrypt? d.
Click to expand...
Click to collapse
Exactly the same here! I would be very happy if someone could help me out, maybe by looking at some logcat files? The device is rooted after all. Just tell me what log files you would need?
I would like to try to flash the stock recovery. Delete TWRP as I think this could be the culprit. I read about bringing the device back to stock but I am unsure what files I do need exactly and how to proceed. I downloaded the LG Flash tool. Any help would be very much appreciated!
I just got this phone, rooted, unlocked BL, installed Xposed. I tried to encrypt phone, but when I started the process, it rebooted and now it's at the white T-Mobile splash screen. There's no progress indication anywhere and it has been almost an hour. I think I'll have to pull battery.
v1ne said:
Has anyone noticed any issue on their h815 with regards to encrypting the phone? Mine does not work; full or quick option. Has unlocking the bootloader caused this to stop working? I have got root and twrp recovery. Could the custom recovery be causing the phone to get stuck on rebooting to encrypt? The lg website says certain features no longer work after the bootloader is unlocked; maybe this is one of those? All just guess work atm, any help would be appreciated.
Click to expand...
Click to collapse
Did you (or fpsq) manage to do this in the end (and if yes, how)? I have the same issue I think... rooted the phone with the method here:
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
and now the phone gets stuck on the initial reboot after launching encryption. It works if I unplug the battery, which shows it doesn't even start the process.
Thanks for any help.
It didn't get anywhere, so I tried it again with quick encryption. Same white screen. I rooted with a huge pre-rooted system image. using dd. Did you unlock boot loader, install custom recovery, or install Xposed?
OGIGA said:
It didn't get anywhere, so I tried it again with quick encryption. Same white screen. I rooted with a huge pre-rooted system image. using dd. Did you unlock boot loader, install custom recovery, or install Xposed?
Click to expand...
Click to collapse
No to all three. I also used dd but first dumped my system partition, injected the root files, and then rewrote it (rather than the main method that you used, writing the ready-made image). See the thread I linked earlier for details.
It really seems the root is the problem here. fpsq seems to have gotten it working in a roundabout way:
http://forum.xda-developers.com/showpost.php?p=62156629&postcount=1468
but I don't understand exactly what he did, I PMed him to ask.
WARNING: Once you encrypt your phone/sdcard you can NOT cancel the process. After you encrypt your phone/sdcard, if you forget your password, you will have to factory reset (wipes /data) and/or format your sdcard (wipes /external_SD) to get a useable phone. Your data WILL be lost!
Also TWRP can not read encrypted volumes other than some Nexus devices, so make a backup BEFORE you encrypt it or the internal/external sdcard.
Overview: You have to kill the SuperSu daemon (temporarily unrooting it) and THEN start the stock encryption process.
1. Install Busybox (need the pkill utility)
2. Open Terminal Emulator and:
Code:
$ su
# pkill -KILL daemonsu
$ exit
NOTE: You'll notice that the # changed back to $. This means that you are no longer the root user and the SuperSu daemon is not running. Do NOT open any other apps, including the SuperSu app.
3. Now go to Settings ---> Security ---> Encrypt Phone.
IMPORTANT: Make sure your phone charger is plugged in. Go through the prompts to encrypt your phone and/or sdcard and the phone will reboot. It will stay at the bootscreen for about a minute and then you will see the white encryption screen. it will ask you for an encryption password. Once you set that, write it down, email it to yourself, whatever you have to do to remember it because if you forget it, there is no helping you. You will have to factory reset (wipes /data) to get a useable phone. Your data WILL be lost!
It will run until it gets to 100% and the phone will reboot. Once it comes back up with the white screen, enter your password and the boot phone will finish booting. To check that the phone/sdcard is encrypted, go to Settings ---> Security and under Encrypt Phone and Encrypt SD card storage, you should see "Encrypted".
Hope this helps.
barcodelinux said:
You have to kill the SuperSu daemon (temporarily unrooting it) and Then start the stock encryption process.
Click to expand...
Click to collapse
It works! And it's so clear why it works, now why didn't I think of this?
Thanks a lot for figuring it out and posting it here, you really helped me! Phones hold so much private data nowadays and are so easy to lose that I was really uncomfortable using it unencrypted.
OGIGA said:
I just got this phone, rooted, unlocked BL, installed Xposed. I tried to encrypt phone, but when I started the process, it rebooted and now it's at the white T-Mobile splash screen. There's no progress indication anywhere and it has been almost an hour. I think I'll have to pull battery.
Click to expand...
Click to collapse
Hey there - did you get any luck with this? My G4 updated to MM last week, and now I'm trying encryption - but it's been sitting on the initial boot screen for over an hour (not a loop, just that one screen), with no progress bar or screen.
No idea what it's doing, but hoping that pulling the battery out won't brick it completely!
PS. my phone isn't even rooted, so it can't be THAT causing a problem
Thanks,
J
jasonnm said:
Hey there - did you get any luck with this? My G4 updated to MM last week, and now I'm trying encryption - but it's been sitting on the initial boot screen for over an hour (not a loop, just that one screen), with no progress bar or screen.
No idea what it's doing, but hoping that pulling the battery out won't brick it completely!
PS. my phone isn't even rooted, so it can't be THAT causing a problem
Thanks,
J
Click to expand...
Click to collapse
I just installed Marshmallow last week and took a stab at encryption again. I installed TWRP 2.7.8.1, by the way. What I also did was flash what I think is the original boot.img. I think this would have un-rooted my device and maybe un-Xposed too, but I forgot because I was really sick last week.
Anyway, the standard device encryption actually worked. I opted for /data encryption instead of full device. Funny thing was that the first time I did it, it was stuck at the boot screen, but was actually encrypting. I didn't know that, so I took out the battery and it screwed up my /data, so the OS made me wipe /data. Fortunately, I backed up right when I did Marshmallow, so I restored my /data. I went to encrypt again and waited this time. Eventually, the screen went from boot screen to the encrypting screen starting at like 60% finished. It finished and my /data was encrypted!
I went to TWRP but TWRP could not decrypt my /data no matter what password I tried. Since my /system and /boot were not encrypted, SuperSU installation was easy. I got the password screen at boot like expected.
However, when I installed Xposed, the password screen would keep popping up with "_____ has stopped" persistently and I had to time it right hit each key of the password. When I uninstalled Xposed, the popups stopped. Installed Xposed again, popups were back. After struggling to enter the password and booting up, everything works fine.
That's how much I have experienced so far.
OGIGA said:
I just installed Marshmallow last week and took a stab at encryption again. I installed TWRP 2.7.8.1, by the way. What I also did was flash what I think is the original boot.img. I think this would have un-rooted my device and maybe un-Xposed too, but I forgot because I was really sick last week.
Anyway, the standard device encryption actually worked. I opted for /data encryption instead of full device. Funny thing was that the first time I did it, it was stuck at the boot screen, but was actually encrypting. I didn't know that, so I took out the battery and it screwed up my /data, so the OS made me wipe /data. Fortunately, I backed up right when I did Marshmallow, so I restored my /data. I went to encrypt again and waited this time. Eventually, the screen went from boot screen to the encrypting screen starting at like 60% finished. It finished and my /data was encrypted!
I went to TWRP but TWRP could not decrypt my /data no matter what password I tried. Since my /system and /boot were not encrypted, SuperSU installation was easy. I got the password screen at boot like expected.
However, when I installed Xposed, the password screen would keep popping up with "_____ has stopped" persistently and I had to time it right hit each key of the password. When I uninstalled Xposed, the popups stopped. Installed Xposed again, popups were back. After struggling to enter the password and booting up, everything works fine.
That's how much I have experienced so far.
Click to expand...
Click to collapse
Thanks for the extra info - need to try again when I get a bit more time, but I eventually pulled the battery (risky, I know!) and put it back in and everything was normal, like nothing had changed. Certainly no encryption anywhere.
Will update when I give it another try.
Thanks again!
So if I had my SD card encrypted, and my phone puked, I get another G4 and want to use my old SD card (I have the password) how can I access the files on the SD card ?
Sent from my iPhone using Tapatalk
I managed to somehow break my 3 week old HTC 10's rear camera glass so I'm going to get it replaced via the "Uh-Oh Protection" since I bought from HTC directly.
I have the Unlocked US edition, but use it on Verizon. When I get my replacement phone, I'll go through the steps to Unlock via HTC dev, run Sunshine for S-OFF and change the CID/MID to Verizon. At that point, can I just flash a NANDROID backup from my old device onto the new one to get my ROM / Apps / etc. back? Will there be any issues since it'll be different hardware? The NANDROID will contain everything I need so I won't need to first apply the VZW RUU right? I think I've done it before on previous HTC hardware but I want to check if it'll work before I try it. Will encryption be an issue?
Sounds good as long as correct firmware is also flashed
drumz0rz said:
I managed to somehow break my 3 week old HTC 10's rear camera glass so I'm going to get it replaced via the "Uh-Oh Protection" since I bought from HTC directly.
I have the Unlocked US edition, but use it on Verizon. When I get my replacement phone, I'll go through the steps to Unlock via HTC dev, run Sunshine for S-OFF and change the CID/MID to Verizon. At that point, can I just flash a NANDROID backup from my old device onto the new one to get my ROM / Apps / etc. back? Will there be any issues since it'll be different hardware? The NANDROID will contain everything I need so I won't need to first apply the VZW RUU right? I think I've done it before on previous HTC hardware but I want to check if it'll work before I try it. Will encryption be an issue?
Click to expand...
Click to collapse
I don't see it being any issue.
So I just got my replacement phone. I followed the exact same steps as I did on my original HTC 10 to get s-off and convert to Verizon (used the same files as well). I made a fresh NANADROID backup on the old phone in TWRP, copied it over to the new phone, and restored it. When I reboot I get stuck on the white splash screen. I tried wiping the cache but I can't progress further.
I was really hoping I'd just be able to use the NANDROID so I don't have to go through the arduous process of backing up all of my apps and settings, and copying them over in TiBu, and having to recustomize everything in VenomHub/Xposed.
What am I doing wrong?
drumz0rz said:
So I just got my replacement phone. I followed the exact same steps as I did on my original HTC 10 to get s-off and convert to Verizon (used the same files as well). I made a fresh NANADROID backup on the old phone in TWRP, copied it over to the new phone, and restored it. When I reboot I get stuck on the white splash screen. I tried wiping the cache but I can't progress further.
I was really hoping I'd just be able to use the NANDROID so I don't have to go through the arduous process of backing up all of my apps and settings, and copying them over in TiBu, and having to recustomize everything in VenomHub/Xposed.
What am I doing wrong?
Click to expand...
Click to collapse
Try dirty flashing ROM
How would changing devices between TWRP backup/restore affect encryption?
EDIT: Since TWRP decrypts now, phone encryption would be a moot point in this context.
I received a replacement Uh-Oh phone from HTC. Unlocked bootloader, installed TWRP and S-Offed. Tried using my Nandroid to restore but TWRP would not see it (file names different, based on S/N). I created a small new backup to create the proper file structure and renamed the old Nandroid backup and placed it in the proper directory. Still would not work so I went to my TiBu backup and reset everything back up.
Here's a strange result though - my fingerprint works fine to unlock the phone but somewhere along the line (perhaps my attempt restoring Nandroid) the pattern lock changed. So now I cannot unlock phone using the pattern and cannot change it. I can use fingerprint so it works for now but I would like to reset the pattern lock - any ideas?
stebaile said:
I received a replacement Uh-Oh phone from HTC. Unlocked bootloader, installed TWRP and S-Offed. Tried using my Nandroid to restore but TWRP would not see it (file names different, based on S/N). I created a small new backup to create the proper file structure and renamed the old Nandroid backup and placed it in the proper directory. Still would not work so I went to my TiBu backup and reset everything back up.
Here's a strange result though - my fingerprint works fine to unlock the phone but somewhere along the line (perhaps my attempt restoring Nandroid) the pattern lock changed. So now I cannot unlock phone using the pattern and cannot change it. I can use fingerprint so it works for now but I would like to reset the pattern lock - any ideas?
Click to expand...
Click to collapse
So when you did a restore with TWRP, what was the result? What does "still would not work" mean exactly? What did the log say?
I'll have to dig into the log file but it is my habit to only backup /data. That's what I was trying to restore. I might need to factory reset to get the pin reset I suppose. Was hoping there was a file I could delete to reset the encryption.
Sent from my HTC 10 using XDA-Developers mobile app
Just in case anyone has this issue of losing their pattern lock from a Nandroid restore I found the answer in a different thread. Use a file manager with root access such as Root Explorer, or use TWRP's file manager capability to delete the locksettings.* files in /data/system. Reboot and your device will no longer have a pattern lock. You will need to create a new pattern lock along with new fingerprint unlocks.
stebaile said:
might need to factory reset to get the pin reset I suppose. Was hoping there was a file I could delete to reset the encryption.
Click to expand...
Click to collapse
Factory reset erases everything, leaving nothing to decrypt.
Your idea of "reset encryption" would make encryption useless if anyone could just remove the lock without the PIN/password.
stebaile said:
Just in case anyone has this issue of losing their pattern lock from a Nandroid restore I found the answer in a different thread. Use a file manager with root access such as Root Explorer, or use TWRP's file manager capability to delete the locksettings.* files in /data/system. Reboot and your device will no longer have a pattern lock. You will need to create a new pattern lock along with new fingerprint unlocks.
Click to expand...
Click to collapse
Rolo42 said:
Factory reset erases everything, leaving nothing to decrypt.
Your idea of "reset encryption" would make encryption useless if anyone could just remove the lock without the PIN/password.
Click to expand...
Click to collapse
Next time just read the TWRP FAQ
http://forum.xda-developers.com/htc-10/development/recovery-twrp-touch-recovery-t3358139/page74
10. After I restored my Data backup and boot back to Android, I'm entering the correct PIN/password, but it's telling me the password is wrong. What happened, and how do I fix it?
It appears that sometimes after restoring a backup of Data where security was enabled (such as a PIN or password lock), the device does not recognize the correct password. There are two ways to avoid this issue:
Disable security in Android?*before?*making a backup of data.
After restoring Data, while still in TWRP, use the TWRP File Manager to navigate to /data/system and delete all the locksettings.* files (such as locksettings.db, etc). When you reboot, the password will be gone.
Click to expand...
Click to collapse
Maik268 said:
Next time just read the TWRP FAQ
http://forum.xda-developers.com/htc-10/development/recovery-twrp-touch-recovery-t3358139/page74
Click to expand...
Click to collapse
Is that referring to unlocking the screen or decrypting the device?
The question was referring to encryption.
When TWRP restores a backup, is it encrypted? (There's a few "it depends" to that question I would think.)
New to the Moto Z2 play, moved to this from a Z2 force on Verizon after the shattershield started peeling. Anyway, there seems to be a lot of conflicting information here, and i'm struggling to actually nail down the process for root. My bootloader is already unlocked, however between several different versions of TWRP, Retus based phones vs Albus, ability to unroot and update if the system is modified, rooting with or without disabling encryption, countless different variants with different procedures, etc. i'm a little overwhelmed. Can anyone point me in the right direction of rooting my device (hopefully) WITHOUT losing all my data?
StATicxTW0T said:
New to the Moto Z2 play, moved to this from a Z2 force on Verizon after the shattershield started peeling. Anyway, there seems to be a lot of conflicting information here, and i'm struggling to actually nail down the process for root. My bootloader is already unlocked, however between several different versions of TWRP, Retus based phones vs Albus, ability to unroot and update if the system is modified, rooting with or without disabling encryption, countless different variants with different procedures, etc. i'm a little overwhelmed. Can anyone point me in the right direction of rooting my device (hopefully) WITHOUT losing all my data?
Click to expand...
Click to collapse
I'm about to buy the unlocked Moto Z2 Play from the Moto site (64GB variant... not sure of the model number) but have you checked out these threads?...
https://forum.xda-developers.com/showpost.php?p=75098899&postcount=40
https://forum.xda-developers.com/z2-play/how-to/guide-resource-help-thread-t3627615/page3
allstar21369 said:
I'm about to buy the unlocked Moto Z2 Play from the Moto site (64GB variant... not sure of the model number) but have you checked out these threads?...
https://forum.xda-developers.com/showpost.php?p=75098899&postcount=40
https://forum.xda-developers.com/z2-play/how-to/guide-resource-help-thread-t3627615/page3
Click to expand...
Click to collapse
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
I have a rooted XT1710-01, also. If you are going to install Xposed and Gravity Box, I recommend not updating Magisk, above v14. After v15 and now v16, I have had issues with Automate It app and Tasker rules not working, until I uninstalled Xposed.
Downgrading Magisk versions requires flashing your stock ROM and basically starting over.
Motorola has not posted firmware for this model.
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
So glad to see someone have it working and with a clear guide. I'm going to buy the phone this week.
StATicxTW0T said:
I did but they involve disabling encryption, which means having to wipe data everytime an update rolls around.
For those that see this in the future, I followed this guide, but used Magisk 13.3 and have working root, without having to wipe my data (bootloader already unlocked) https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792
Click to expand...
Click to collapse
I just wanted to let everyone know that the guide posted in that post worked for me perfectly. I had an XT1710-01 that I had unlocked the bootloader before but stopped there. Then I finally wanted to root it, and ran into everything the OP ran into - just so many different guides and versions of TWRP/Magisk not working with the Z2 Play, it was hard to nail down the exact versions of everything I needed and make sure I didn't flash an incompatible version or something. I found that same guide a few days ago as well but never did it until today, and can confirm it works. I already had my bootloader unlocked and just did the rooting portion and all my data was saved (but I wasn't too worried about my data honestly, it's all backed up anyway).
And a special thanks to OP for coming back and posting his solution. Nothing is more frustrating than searching for a problem online, finding a hit on your exact problem in a thread that was posted years ago, and then no solution is ever posted in that thread. So good job. :good:
Johmama said:
I just wanted to let everyone know that the guide posted in that post worked for me perfectly. I had an XT1710-01 that I had unlocked the bootloader before but stopped there. Then I finally wanted to root it, and ran into everything the OP ran into - just so many different guides and versions of TWRP/Magisk not working with the Z2 Play, it was hard to nail down the exact versions of everything I needed and make sure I didn't flash an incompatible version or something. I found that same guide a few days ago as well but never did it until today, and can confirm it works. I already had my bootloader unlocked and just did the rooting portion and all my data was saved (but I wasn't too worried about my data honestly, it's all backed up anyway).
And a special thanks to OP for coming back and posting his solution. Nothing is more frustrating than searching for a problem online, finding a hit on your exact problem in a thread that was posted years ago, and then no solution is ever posted in that thread. So good job. :good:
Click to expand...
Click to collapse
I just received my Z2 Play, unlocked the bootloader, and am about to flash the custom TWRP (albus_twrp.img) posted in the guide linked above... but the guide never says to "flash" TWRP, it just says to "boot" with TWRP and also "Enter your FBE password: it must work! (turn off screen and turn it back on if not responsive)"...
I'm not 100% sure what to do here. Should I boot TWRP first, do a full backup and then flash TWRP? I don't want to wipe it.
And what is this FBE (File-Based Encryption) password? I've never set one and don't want everything encrypted.
allstar21369 said:
I just received my Z2 Play, unlocked the bootloader, and am about to flash the custom TWRP (albus_twrp.img) posted in the guide linked above... but the guide never says to "flash" TWRP, it just says to "boot" with TWRP and also "Enter your FBE password: it must work! (turn off screen and turn it back on if not responsive)"...
I'm not 100% sure what to do here. Should I boot TWRP first, do a full backup and then flash TWRP? I don't want to wipe it.
And what is this FBE (File-Based Encryption) password? I've never set one and don't want everything encrypted.
Click to expand...
Click to collapse
I didn't flash TWRP on my phone. I think I tried it once and it failed for some reason, so I just followed the guide of booting into TWRP, backing up my phone, and pulling the backup. Should be okay for what I need, in case of a failure I will have a backup somewhere and can recover the device. But yes, I'd at least boot into TWRP, then backup your device like in that guide so you have a backup. Flashing it is up to you, I've always flashed a custom recovery but on this phone I'm keeping the original recovery so I can get an OTA. On my Nexus devices I don't care about OTA because I just flash ROMs all the time so it's no big deal.
The FBE password as far as I can tell is the 4 or 5 digit PIN number you are asked to input upon a fresh wipe of your device to set as a password. I have my phone set up to use my fingerprint to unlock the phone, and if that fails it will ask for my PIN, which is the same as the FBE of mine. I used that same number in TWRP when it asks for a password to unencrypt the data and it worked. As far as turning off encryption, I'm not sure if there's a way to do that. There could be, but to turn it off, it wipes your data as a security measure.
Johmama said:
so I just followed the guide of booting into TWRP, backing up my phone, and pulling the backup. Should be okay for what I need, in case of a failure I will have a backup somewhere and can recover the device. But yes, I'd at least boot into TWRP, then backup your device like in that guide so you have a backup.
Click to expand...
Click to collapse
Yeah, I can't backup my ROM most likely because I don't have an FBE password. When I go to backup my ROM in TWRP it fails.
Johmama said:
The FBE password as far as I can tell is the 4 or 5 digit PIN number you are asked to input upon a fresh wipe of your device to set as a password. I have my phone set up to use my fingerprint to unlock the phone, and if that fails it will ask for my PIN, which is the same as the FBE of mine. I used that same number in TWRP when it asks for a password to unencrypt the data and it worked.
Click to expand...
Click to collapse
I tried entering my unlock code and the pin I created but neither worked for my FBE password. I don't ever remember being asked to enter a password when setting up my device. I suppose this means I'll have to wipe data and then setup an FBE password.
allstar21369 said:
I tried entering my unlock code and the pin I created but neither worked for my FBE password. I don't ever remember being asked to enter a password when setting up my device. I suppose this means I'll have to wipe data and then setup an FBE password.
Click to expand...
Click to collapse
If it helps at all, the first time I tried it also didn't work for me and I did end up wiping my phone for other reasons before I came back and tried that guide again and it worked. I thought I set up the PIN they're talking about the first time around but I did have troubles in TWRP before the first wipe of my data. I would just boot up the phone regularly, plug it in to your computer, and try to grab any files you need and wipe it. I know that isn't the answer you're looking for, but it's all I can give I guess. Once you reset, hopefully they'll prompt you to make a PIN during the setup process and that should be the FBE password. Then follow the guide. I hope you get it man.
Oh, and to a note to you and everyone reading this, I booted to TWRP 3.2.1-0-albus and Magisk-v14.0. Dunno if it's just rumors or not but I heard the newer versions of Magisk might not work with the Z2 Play past version 14. Dunno if that's true but v14.0 worked for me.
Johmama said:
If it helps at all, the first time I tried it also didn't work for me and I did end up wiping my phone for other reasons before I came back and tried that guide again and it worked. I thought I set up the PIN they're talking about the first time around but I did have troubles in TWRP before the first wipe of my data. I would just boot up the phone regularly, plug it in to your computer, and try to grab any files you need and wipe it. I know that isn't the answer you're looking for, but it's all I can give I guess. Once you reset, hopefully they'll prompt you to make a PIN during the setup process and that should be the FBE password. Then follow the guide. I hope you get it man.
Oh, and to a note to you and everyone reading this, I booted to TWRP 3.2.1-0-albus and Magisk-v14.0. Dunno if it's just rumors or not but I heard the newer versions of Magisk might not work with the Z2 Play past version 14. Dunno if that's true but v14.0 worked for me.
Click to expand...
Click to collapse
Okay. I just wiped and re-set up everything and still no FBE password was asked for OR works when I go into TWRP. I'm using TWRP 3.1.1-0... I suppose I'll try it all again using TWRP 3.2.1-0-albus after deleting data.
*Edit: I did exactly what I just said I was doing booted TWRP 3.2.1-0-albus instead of 3.1.1-0 and when I it booted up and asked me for a decryption password I entered the pin I set up previously and it has been stuck at the "Mount, Trying Decryption" screen for a long time... but it's not frozen. It says "Updating partition details... ...done
Unable to mount storage
Full SELinux support is present.
Data successfully decrypted, new block device: '/dev
/block/dm-0'
Updating partition details...
...done"
And the progress bar/thing at the bottom is still animated like it's working... no forward or back buttons or anything and turning off/on the screen hasn't done anything... not really sure what to do here... I don't want to unplug it and brick my phone or force it off...
*Edit 2:
I now have it all sorted out.
TWRP never finished trying to decrypt data so I long pressed the power button and eventually went here -> https://forum.xda-developers.com/z2-play/development/twrp-moto-z2-play-t3729531 , downloaded "twrp_albus_3.1.2_r18_64.img" and in adb used the command:
fastboot boot twrp_albus_3.1.2_r18_64.img
This TWRP looks a bit different than all of the others but it let me boot up and use my recently created PIN code to actually decrypt my data and make a full backup. After that I just installed Magisk (the latest one, 16.4) as indicated in this guide -> https://gist.github.com/eexit/e6d5fc0984e1c7f25376d3dafa819792 and everything is fine. I never even flashed TWRP, just booted it.
Just curious what you guys have done about getting OTA updates since you've rooted and installed Magisk.
Have @allstar21369 or @pizza_pablo had the chance to figure out the update process?
I'm currently trying to navigate the Magisk uninstall --> OTA update process and could use some insight if either of you guys have any to share.
joefuf said:
Just curious what you guys have done about getting OTA updates since you've rooted and installed Magisk.
Have @allstar21369 or @pizza_pablo had the chance to figure out the update process?
I'm currently trying to navigate the Magisk uninstall --> OTA update process and could use some insight if either of you guys have any to share.
Click to expand...
Click to collapse
I didn't want updates, especially the oreo "upgrade".
pizza_pablo said:
I didn't want updates, especially the oreo "upgrade".
Click to expand...
Click to collapse
Hmm, didn't even think about just sticking on what works... Did Oreo give people some issues?
Since this was Day 1 with the new phone, I was just trying to get up to speed and probably sit on one version until I had compatibility issues with something, but everything just works.
joefuf said:
Hmm, didn't even think about just sticking on what works... Did Oreo give people some issues?
Since this was Day 1 with the new phone, I was just trying to get up to speed and probably sit on one version until I had compatibility issues with something, but everything just works.
Click to expand...
Click to collapse
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Double - double \_0_/
pizza_pablo said:
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Click to expand...
Click to collapse
I feel exactly the same way. No benefits for me. I don't want the bright white interface and I would never use the "Picture in Picture" (or floating video) feature (and if I did want that there are a couple apps for Nougat that do it).
But If I do decide I want it and give upgrading a shot I'll definitely post it here.
pizza_pablo said:
Oreo hasn't come to the phone, when I decided I didn't want it, mostly because of the white background in the Quick Settings and I didn't want any of the other "improvements".
With this setup, I accept the risks of not having the security updates.
Click to expand...
Click to collapse
Yeah, very understandable. It really is superfluous to the general experience.
allstar21369 said:
I feel exactly the same way. No benefits for me. I don't want the bright white interface and I would never use the "Picture in Picture" (or floating video) feature (and if I did want that there are a couple apps for Nougat that do it).
But If I do decide I want it and give upgrading a shot I'll definitely post it here.
Click to expand...
Click to collapse
Thank you sir! Keep me posted. I'm posting everywhere right now to learn the new methods so I know if there ever comes a time. This is my first phone since my Motorola Droid 4. Back then it was one click root, install and run Safestrap apk to get custom recovery, boot into custom recovery and flash zips to your heart's content. I'm sure this will be as "simple" once I learn, but it's pretty daunting in prospect.
Hi,
I flashed TWRP on my unlocked Redmi Note 8T with MIUI Global 12.5.5. Everything was great until I rebooted it and saw Bluetooth error which pops every time I try to turn Bluetooth on or just randomly during usage of the device. I also tried to re-flas TWRP with Orange fox but it unfortunatelly did not help. Now I have no idea what to do but there are also some other people with this problem (for example:
https://www.reddit.com/r/Xiaomi/comments/y9zsak
).
Does anybody know any solution? Thanks!
Btw Orange fox is for ginko devices, I did not find version for willow
I had the exact same problem when I tried to root my stock rom in ginkgo. I was getting a lot of "app keeps stopping" pop ups, and that also included bt. My bt was completely broken until I changed rom. Also I'm guessing this had happened when I had rooted my phone with magisk, not by flashing recovery itself. Perhaps you could try to uninstall magsik, and see it it resolves the issue for you. If that would be the case, then you would have found your problem, and maybe you can flash a custom rom to safely root your phone.
Thanks for reply, but i did not have magisk flashed on my phone. I only had installed the app, prepared apk file and did nothing in TWRP (Orange fox) , just flashed a recovery with my PC, checked that it is working and rebooted device. Anyway I tried to do it only because of acces to NFC and Gpay which is now blocked.
As you also said, I would like to try custom rom (like LineageOS) because it seems like bad idea to have a stock room on an unlocked phone. Only the problem is how to backup data like data from apps, games etc.
So now it tried one of my ideas, which was to install Magisk (root) and uninstall it but it also did not help (I expected that)
vasik006 said:
Thanks for reply, but i did not have magisk flashed on my phone. I only had installed the app, prepared apk file and did nothing in TWRP (Orange fox) , just flashed a recovery with my PC, checked that it is working and rebooted device. Anyway I tried to do it only because of acces to NFC and Gpay which is now blocked.
As you also said, I would like to try custom rom (like LineageOS) because it seems like bad idea to have a stock room on an unlocked phone. Only the problem is how to backup data like data from apps, games etc.
Click to expand...
Click to collapse
To backup data simply copy your personal files in pc or sdcard. And to backup data in apps, take back-up of only those apps and where you need to backup. Don't take a complete backup using some app. That consumes a lot of space and make the newly rom feel "not so new". Most apps don't require you to take back-up offline these days. I usually backup only my personal files before flashing rom.
Yeah, that's true. But don't you know how to backup data from these "offline" apps? I was trying to solve this also before unpocking bootloader like a year ago but unsuccessfuly.
Also, which rom should I choose? I'm deciding between LineageOS and Pixel experience.
So I have LOS installed but I can´t install other zip files (like Google apps). Im only getting error: signature verification failed while. Im using LOS recovery so where is the problem?
Solved it!
Hey @vasik006 ! I know this is very late and you might have found the solution yourself, but I found the solution to this problem. Since yesterday I was trying to root my ginkgo with twrp, using magisk delta and had exact same issue. Joyose and bluetooth keeps stopping, and don't work. Simply factory reset ( I also formatted data) in twrp, and in next boot bluetooth should work. Then you can simply install the magisk apk and let it do its thing. No need to flash again since it has already made changes to boot file that can't be overriden by resetting phone.
Thanks, this might help someone else with this problem. I have already formatted my phone, installed Lineage OS and everything is ok
For me, the problem with BT and Joyose occurs only with TWRP v3.7.x. I went back to TWRP v3.6.1_9-0 but now backups are not working.
Jatin Verma x821 said:
Hey @vasik006 ! I know this is very late and you might have found the solution yourself, but I found the solution to this problem. Since yesterday I was trying to root my ginkgo with twrp, using magisk delta and had exact same issue. Joyose and bluetooth keeps stopping, and don't work. Simply factory reset ( I also formatted data) in twrp, and in next boot bluetooth should work. Then you can simply install the magisk apk and let it do its thing. No need to flash again since it has already made changes to boot file that can't be overriden by resetting phone.
Click to expand...
Click to collapse
I have the same problem with the Redmi note 8. Did you unroot first or did the factory reset directly? Tks
ennev said:
I have the same problem with the Redmi note 8. Did you unroot first or did the factory reset directly?
Click to expand...
Click to collapse
no need to unroot. simple factory reset the device and you're done.
Jatin Verma x821 said:
To backup data simply copy your personal files in pc or sdcard. And to backup data in apps, take back-up of only those apps and where you need to backup. Don't take a complete backup using some app. That consumes a lot of space and make the newly rom feel "not so new". Most apps don't require you to take back-up offline these days. I usually backup only my personal files before flashing rom.
Click to expand...
Click to collapse
TWRP is invaluable for backing up the system before making changes like theming etc. and I can take a TWRP backup to any of my (all the same) devices and restore the whole thing in just a few minutes. So convenient! I really couldn't imagine life without TWRP. TWRP enables me to clone my device in case of hardware failure. All my settings and all my apps and all my custom configurations which would otherwise take hours/days to setup - BAM! Presto! on the new device and running perfectly.
TWRP + NeoBackup are essential. TWRP as described, and NeoBackup to roll back breaking updates to apps when devs butcher them, break them, and/or just remove really useful features. I also disconnect apps that get ruined by an update from the Play Store so they don't keep coming up when I check for updates.
Alpha_Geek1 said:
TWRP is invaluable for backing up the system before making changes like theming etc. and I can take a TWRP backup to any of my (all the same) devices and restore the whole thing in just a few minutes. So convenient! I really couldn't imagine life without TWRP. TWRP enables me to clone my device in case of hardware failure. All my settings and all my apps and all my custom configurations which would otherwise take hours/days to setup - BAM! Presto! on the new device and running perfectly.
TWRP + NeoBackup are essential. TWRP as described, and NeoBackup to roll back breaking updates to apps when devs butcher them, break them, and/or just remove really useful features. I also disconnect apps that get ruined by an update from the Play Store so they don't keep coming up when I check for updates.
Click to expand...
Click to collapse
I would advise you to read the posts again. They were asking about how to take backup of "personal apps" which twrp can't do, and if they are changing ROM then twrp backup won't be of any use to them. Therefore, whatever you're trying to tell here doesn't really help the discussion.
Jatin Verma x821 said:
I would advise you to read the posts again. They were asking about how to take backup of "personal apps" which twrp can't do, and if they are changing ROM then twrp backup won't be of any use to them. Therefore, whatever you're trying to tell here doesn't really help the discussion.
Click to expand...
Click to collapse
TWRP does backup personal apps and their settings. Once you restore a TWRP backup, you have everything back except media files - images, videos, documents, etc. The launcher icons, the apps, the system settings - everything is a perfect clone which you can restore on a new device (same model, of course).
I actually came across this thread searching to see if others had a problem where merely flashing TWRP caused Bluetooth to crash (and Atmos).
Use OrangeFox
is there anyone use BT-fix-for-PE-20190618.zip to fix this problem ?
I'm on an ROG Phone II with the same issue.
The "fix" is to wipe in TWRP and install Magisk BEFORE you leave for your first boot and NEVER come back to TWRP as the issue will return the second recovery is booted.
s3rv said:
For me, the problem with BT and Joyose occurs only with TWRP v3.7.x. I went back to TWRP v3.6.1_9-0 but now backups are not working.
Click to expand...
Click to collapse
From what I can tell, this is correct. 3.6_XX-X allows me to come and go from TWRP as much as I please without incurring the bug, however, I haven't tested backup though I can't see a reason why they wouldn't work.
Are these existing backups that aren't working or the whole backup function in general?
starkshadow said:
is there anyone use BT-fix-for-PE-20190618.zip to fix this problem ?
Click to expand...
Click to collapse
It looks like this guy didn't have any luck with it either. It may be divice specific
Dredead said:
I'm on an ROG Phone II with the same issue.
The "fix" is to wipe in TWRP and install Magisk BEFORE you leave for your first boot and NEVER come back to TWRP as the issue will return the second recovery is booted.
From what I can tell, this is correct. 3.6_XX-X allows me to come and go from TWRP as much as I please without incurring the bug, however, I haven't tested backup though I can't see a reason why they wouldn't work.
Are these existing backups that aren't working or the whole backup function in general?
It looks like this guy didn't have any luck with it either. It may be divice specific
Click to expand...
Click to collapse
amazing, I have do nothing, just reboot my device, and yesterday the bluetooth also has problem, but today I open bluetooth, it is no problem. I'm still confused about that.
starkshadow said:
amazing, I have do nothing, just reboot my device, and yesterday the bluetooth also has problem, but today I open bluetooth, it is no problem. I'm still confused about that.
Click to expand...
Click to collapse
It seems to be a twrp issue. What version do you have? And what version of magisk do you have?
I have recently flashed miui 12 (android 10) after bricking the phone using qtel. I noticed the Bluetooth problem last week and didn't find a fix. I have twrp 3.6.2 and magisk 25.1. I had twrp 3.7.1 but if failed to decrypt data using pattern so I rolled back to 3.6.2. And I thought that magisk had to do with the Bluetooth problem so I rolled back to 25.1 from 26.
I still can't use the Bluetooth, and I don't have time to reset the phone, I just finished restoring everything
I CAN CONFIRM
go back to the previous twrp 3.6.2 version + wipe factory reset or simply format data solve sucesfuly solve installation issue of Magisk 26.1 or Magisk Delta 25210
Olfason said:
I CAN CONFIRM
go back to the previous twrp 3.6.2 version + wipe factory reset or simply format data solve sucesfuly solve installation issue of Magisk 26.1 or Magisk Delta 25210
Click to expand...
Click to collapse
I can't afford resetting my phone right now , don't have enough time. I'll let it like that for some months.
Edit : I have miui 12.0.6 installed (android 10) and I'm not planning to upgrade since I have much better battery life (even better than every mod I tried). I wander if I flash miui rom from recovery can fix it?
Edit 2: flashing the rom from recovery didn't fix it