Related
Hey! Day 2 with my new tablet here I spent some time today getting myself root access and set up Xposed... OK, I really set up Xposed. It's been a while since I've looked through the repo so there were a ton of new modules. Very clearly some thing(s) aren't getting along. I had no problems whatsoever after attaining root and installing Wanam's Xposed. I can't even check atm how many modules I have because I'm getting an insta-reboot after launching most apps but it's more than 10. There are a few that I'm pretty sure are working fine because I was able to see them in action.
The ones I'm pretty sure these are working ok:
Xposed Additions
Xui Mod
Gravity Box (LP) (make changes slowly or it could cause problems)
Greenify
Hmm, that's all I can think of atm... a lot of the ones I'm unsure of are probably fine, but their effects are harder to observe so I'll list those last.
Don't seem to be working:
XStana
Wanam LP (? not sure about that)
Net Speed Indicator
iFont (? this might work... can't test it though)
Unsure if problematic:
Amplify
Unbeloved Hosts (? not sure... hope so though)
Play Permissions Exposed
Unicon (disappointingly definitely doesn't work, really like this one)
Those are all I can think of without being able to see what else, but I have a few more. Does anyone use/have any info on the modules I've listed? Anything else you're using that's worthwhile?
One last question: Does anyone happen to remember the key combo to boot with Xposed disabled? I just can't think of it right now....
Thanks! Hope to get some good Xposed/module discussion going in here :good:
Hi,can you post small tutorial how you install Xposed?
Wysłane z mojego SM-T715 przy użyciu Tapatalka
dawidek1258 said:
Hi,can you post small tutorial how you install Xposed?
Wysłane z mojego SM-T715 przy użyciu Tapatalka
Click to expand...
Click to collapse
Surely, tutorial and files located here: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
I have wanam, gravity box, greenify, and blurred UI working fine here. Oh yeah, YouTube adaway too,
Bubba Fett said:
I have wanam, gravity box, greenify, and blurred UI working fine here. Oh yeah, YouTube adaway too,
Click to expand...
Click to collapse
Cool, glad to hear that Gravity Box works; I was reluctant to try it.
jazzmachine said:
Cool, glad to hear that Gravity Box works; I was reluctant to try it.
Click to expand...
Click to collapse
I've found you have to turn them on slowly tho. Too many system UI changes at once cause problems.
Bubba Fett said:
I've found you have to turn them on slowly tho. Too many system UI changes at once cause problems.
Click to expand...
Click to collapse
Seems to be the case. I really like having a nav bar. Were you able to get any status bar changes to take? Center clock or net speed indicator for instance?
Also have you tried xui mod? I really like that one, some awesome visual effects.
jazzmachine said:
Seems to be the case. I really like having a nav bar. Were you able to get any status bar changes to take? Center clock or net speed indicator for instance?
Also have you tried xui mod? I really like that one, some awesome visual effects.
Click to expand...
Click to collapse
I have tried xui on my note 4 and had it working as well as the s2 on 5.0, but haven't tried it on 5.1. I love that mod. I boot looped but I think it was too many mods at one time.
I have gotten center clock to work from either wanam or gravity box. Cant remember. But one of them worked for that. Also stock battery to dotted circle with Gravity. Those devs are great. They will make it happen eventually.
jazzmachine said:
Don't seem to be working:
iFont (? this might work... can't test it though)
:
Click to expand...
Click to collapse
iFont is typically one of the first apps I install when I get a new device so I usually set it up before I root. I've always wondered what are the differences between the app and the xposed mod for iFont?
shanda5303 said:
iFont is typically one of the first apps I install when I get a new device so I usually set it up before I root. I've always wondered what are the differences between the app and the xposed mod for iFont?
Click to expand...
Click to collapse
That's a good question... the answer to which I have no idea I forgot that it was also an app so thanks for the reminder. I can't really see what the advantage to the Xposed mod would be; the S2 doesn't seem to like having too many modules running. The app works great though :good:
jazzmachine said:
That's a good question... the answer to which I have no idea I forgot that it was also an app so thanks for the reminder. I can't really see what the advantage to the Xposed mod would be; the S2 doesn't seem to like having too many modules running. The app works great though :good:
Click to expand...
Click to collapse
Lol no problem ?
Bubba Fett said:
I have wanam, gravity box, greenify, and blurred UI working fine here. Oh yeah, YouTube adaway too,
Click to expand...
Click to collapse
Which Wanam apk are you using?
rfb813 said:
Which Wanam apk are you using?
Click to expand...
Click to collapse
I restored from TB, but I believe it was just the normal LP wanam from the modules menu in xposed. To my knowledge there only KK and LP options.
rfb813 said:
Which Wanam apk are you using?
Click to expand...
Click to collapse
I'm also using the latest Wanam [LP] module from the repo. Not all, but many of the modifications work fine :good:
I am using DoubleTaptoSleep, GravityBox(not all function working well), Wanam Xposed LP, Notification count.
I use with 5.1.1 and xposed:
- Amplify
- Greenify
- Wanam Xposed
- Youtube AdAway
- Youtube Background Playback
Everything works fine but Wanam... Not every option works.
A note about Gravity Box that'll hopefully be helpful to others - the newest version (5.34) messed up some things with my setup. Removal of the nav bar was the most noticeable example but there were a couple of other things. Version 5.33 worked fine so I'm going to stick with that one for now on my S2.
jazzmachine said:
A note about Gravity Box that'll hopefully be helpful to others - the newest version (5.34) messed up some things with my setup. Removal of the nav bar was the most noticeable example but there were a couple of other things. Version 5.33 worked fine so I'm going to stick with that one for now on my S2.
Click to expand...
Click to collapse
One Question: The XPosed-Framework is for Android 5.1.1 and 6.0. Galaxy Tab S2 is still on 5.0.2.
There is only one custom Rom for Tab S2 from 21.09.2015. Do you know if some other custom roms are coming? Or dont the delevelopers like the tab s2?
a.affe said:
One Question: The XPosed-Framework is for Android 5.1.1 and 6.0. Galaxy Tab S2 is still on 5.0.2.
There is only one custom Rom for Tab S2 from 21.09.2015. Do you know if some other custom roms are coming? Or dont the delevelopers like the tab s2?
Click to expand...
Click to collapse
I'd surely whip one up for my 817T if I could The tablet is is still somewhat new... another consideration is the Exynos processor which tends to lead to less development vs. Qualcomm devices. I would love to run a custom ROM and kernel on my S2 but I really enjoy it and use it a ton just stock rooted. I can't send out enough thanks to @ashyx for laying out the root method for my variant and all of his help otherwise :good:
So to answer your question, we shall see
jazzmachine said:
I'd surely whip one up for my 817T if I could The tablet is is still somewhat new... another consideration is the Exynos processor which tends to lead to less development vs. Qualcomm devices. I would love to run a custom ROM and kernel on my S2 but I really enjoy it and use it a ton just stock rooted. I can't send out enough thanks to @ashyx for laying out the root method for my variant and all of his help otherwise :good:
So to answer your question, we shall see
Click to expand...
Click to collapse
I have the 810 9.7 Wifi. Would love to have a great custom Rom like Alliance Rom....
Hello everyone. I'm thinking to take the leap and go to Nougat from MM, but my g4 suffers from a pretty bad screen burn effect.
On MM I use the superexe kernel work around to regulate screen colours and it's basically solved. Can anyone recommend me a nougat kernel with the same function? I just care for the screen control.
toy203 said:
Hello everyone. I'm thinking to take the leap and go to Nougat from MM, but my g4 suffers from a pretty bad screen burn effect.
On MM I use the superexe kernel work around to regulate screen colours and it's basically solved. Can anyone recommend me a nougat kernel with the same function? I just care for the screen control.
Click to expand...
Click to collapse
i think llama kernel.. works with nougat. and has that feature.
raptorddd said:
i think llama kernel.. works with nougat. and has that feature.
Click to expand...
Click to collapse
Thanks for the reply. I don't seem to find anything about Llama Sweet screen control feature around, am i missing something?
toy203 said:
Thanks for the reply. I don't seem to find anything about Llama Sweet screen control feature around, am i missing something?
Click to expand...
Click to collapse
i think i only use it once . as i only use stock based roms.. and on stock it has bluetooth issue. so i removed it.
@kessaras shoud know the answer.
toy203 said:
Thanks for the reply. I don't seem to find anything about Llama Sweet screen control feature around, am i missing something?
Click to expand...
Click to collapse
llama kernel + kernel adiutor to see the screen controls or ask me to make a script.
easy to find the thread.
Thanks! I'll give it a try
kessaras said:
llama kernel + kernel adiutor to see the screen controls or ask me to make a script.
easy to find the thread.
Click to expand...
Click to collapse
So apparently the latest llama kernel was pulled from XDA from the author, and even if J manage to find it the Bluetooth doesn't work.
Any other solution?
toy203 said:
So apparently the latest llama kernel was pulled from XDA from the author, and even if J manage to find it the Bluetooth doesn't work.
Any other solution?
Click to expand...
Click to collapse
bluetooth doesnt work for stock roms.. for cm aosp it does.
mm maybe kessaras could share it with you.
Turns your phone into a touchpad mouse for PC! Works with LOS14.1 by bigsupersquid
Changelog:
171116:simulated touchpad support. thx pelya
171127:Now with dt2w support. Goodbye broken power button. thx showp1984
Click to expand...
Click to collapse
Download:
Code:
[URL="https://www.androidfilehost.com/?fid=962021903579495061"]AFH[/URL]
Flash:
Code:
[COLOR=Black]fastboot flash boot <boot_img_here>[/COLOR]
For Keyboard app, always download from Play store/Github
Root required, Magisk recommended.
I'm either trying to port DT2W for this device, but no luck. Done.
Anyway you may give me some feedback, source below.
Source: Github
XDA:DevDB Information
HID-compliant TP/KB kernel, Kernel for the HTC Desire 816
Contributors
Aerotinge, bigsupersquid, pelya, showp1984
Kernel Special Features:
HID-compliant driver,Doubletap2wake
Version Information
Status: Beta
Beta Release Date: 2017-11-16
Created 2017-11-16
Last Updated 2017-11-27
Dammit I finally make dt2w running on this himax touchscreen driver.
No one done this before and I know little about C. That's...awwww
Enjoy!
Hi, Thank you for your work, Do you tell me i can use this for HTC816 DWG or no?
faezehya said:
Hi, Thank you for your work, Do you tell me i can use this for HTC816 DWG or no?
Click to expand...
Click to collapse
As "a5_ul" is there in the title, I'll say no.
But you can have a try. It won't explode (I guess so.)
Aerotinge said:
As "a5_ul" is there in the title, I'll say no.
But you can have a try. It won't explode (I guess so.)
Click to expand...
Click to collapse
The dts might be a little different.
Overall it'll probably work.
I hadn't seen this, nice work!
If you don't mind I'd like to import your changes, both the dt2w and the hid configs.
initial feedback, it works on my DUG
going to test it all day tomorrow
Edit: ok nvm it works for some time then touch screen stops working when the phone goes in deep sleep
bigsupersquid said:
The dts might be a little different.
Overall it'll probably work.
I hadn't seen this, nice work!
If you don't mind I'd like to import your changes, both the dt2w and the hid configs.
Click to expand...
Click to collapse
can this be ported fow dwg/dug?
Roberto Nigel said:
can this be ported fow dwg/dug?
Click to expand...
Click to collapse
If I import the kernel patches and it all works right, it'll be fine when it's built in to LOS.
Roberto Nigel said:
initial feedback, it works on my DUG
going to test it all day tomorrow
Edit: ok nvm it works for some time then touch screen stops working when the phone goes in deep sleep
Click to expand...
Click to collapse
Yes I found that issue recently...
I always connect the phone to charger so I didn't found it at the first time.
It seems to be something about deep doze mechanism, which a noobie like me can't solve alone, sorry.
I would port a fix if someone found a solution on other devices.
Aerotinge said:
Yes I found that issue recently...
I always connect the phone to charger so I didn't found it at the first time.
It seems to be something about deep doze mechanism, which a noobie like me can't solve alone, sorry.
I would port a fix if someone found a solution on other devices.
Click to expand...
Click to collapse
I'll look into it, dt2w is pretty cool and I'd like to incorporate it
No guarantee of fixing anything of course.
bigsupersquid said:
If I import the kernel patches and it all works right, it'll be fine when it's built in to LOS.
Click to expand...
Click to collapse
welp if that helps, after removing android system from battery optimization the touch screen doesnt die but dt2w is not consistant, some times it stops and have to open from the power button for it to work again
Roberto Nigel said:
welp if that helps, after removing android system from battery optimization the touch screen doesnt die but dt2w is not consistant, some times it stops and have to open from the power button for it to work again
Click to expand...
Click to collapse
Excellent observation and a perfect place to post it.
Kudos!
Can we get n overclock kernel...
Hey bro PLEASE make it work for a5 dug/DWG...I f**king love d2tw feature
In exchange can I do something for you ?donations ? Any help? I will do anything XD just please make it work on a5 dug/dwg models
@AnjoVingador sir can u please maintain are pixel experience rom because this rom is quite stable but some of the bugs are there to be solved please sir
+1
+1
I would really appreciate, if it conitnues.
+1
Yes, it will. New build soon
AnjoVingador said:
Yes, it will. New build soon
Click to expand...
Click to collapse
Thank you so much sir...one more request can you please bring always on and ambient display if possible...thanks in advance
AnjoVingador said:
Yes, it will. New build soon
Click to expand...
Click to collapse
Also some gesture and if OTA update could be possible
sonarkrishna said:
Also some gesture and if OTA update could be possible
Click to expand...
Click to collapse
Adding Always on display is ridiculous on our phone as the display is not done for it. Ambiant display is already there if you means the screen showing notifications while on black when receiving. For gestures, what do you mean? It has dt2w and that is the only gesture we do have on this device. For ota I already talked about it with him and he don't know if it will come. It is not up to him but it is the rom creator that must do it
benplay64 said:
Adding Always on display is ridiculous on our phone as the display is not done for it. Ambiant display is already there if you means the screen showing notifications while on black when receiving. For gestures, what do you mean? It has dt2w and that is the only gesture we do have on this device. For ota I already talked about it with him and he don't know if it will come. It is not up to him but it is the rom creator that must do it
Click to expand...
Click to collapse
Okay... Are you using pixel experience rom if yes will you post to arnova8g2 for portrait mode to work because it has a full hardware support to work. And post him with logcat
sonarkrishna said:
Okay... Are you using pixel experience rom if yes will you post to arnova8g2 for portrait mode to work because it has a full hardware support to work. And post him with logcat
Click to expand...
Click to collapse
Yes I'm on PE since its release. But no need to post anything about portrait mod, Mrhacker seems to have resolved it. So it a question of time for us and hard work for him before we do have it on all the other roms. Wait patiently... Also I don't which bugs you're mentioning. I don't have any. Not apparent at least
benplay64 said:
Yes I'm on PE since its release. But no need to post anything about portrait mod, Mrhacker seems to have resolved it. So it a question of time for us and hard work for him before we do have it on all the other roms. Wait patiently... Also I don't which bugs you're mentioning. I don't have any. Not apparent at least
Click to expand...
Click to collapse
More stable I want
sonarkrishna said:
Okay... Are you using pixel experience rom if yes will you post to arnova8g2 for portrait mode to work because it has a full hardware support to work. And post him with logcat
Click to expand...
Click to collapse
Finally finally portrait mode is succeeded to work on lovely Lenovo z2 plus special thanks to @mr.hacker
Now eagerly waiting for portrait mode on pixel experience rom
Pixel Experience is Surely the Best Rom for our device , maybe it's just me who finds it but still I would request the devs to pls maintain it further. BTW by what time should we expect a new build?
You can enable fast charging 3.0 in this pixel experience rom?
Manthanmk1 said:
You can enable fast charging 3.0 in this room?
Click to expand...
Click to collapse
How is it so..?
Finally portrait mode is on its way to Lenovo z2 plus
well hello to everyone
i hope you all loving camera and having good time with it do post your best settings and help guys who having issues with camera settings.
so i have investigated camera hal sources and now it looks like all is okay for releasing and open source for community
so here is the link to camera hal sources https://github.com/omni-zuk/device_z...oid-8.1/camera
all commits are open here and ready for cherry-pick https://github.com/omni-zuk/device_z...0a9787bab45b33 well developers needs to revert this commit because this commit only for omnirom which don;t need project pathmap so reverting it will work for other roms and make hal compatible for other roms without issues.
thanks to everyone i got very positive response from the users on xda and telegram so big thanks to all of you. @AnjoVingador
Okay I'm confused. Who is the new maintainer of PE?
Want development of this rom to continue so bad...
Beepboop_blues said:
Okay I'm confused. Who is the new maintainer of PE?
Want development of this rom to continue so bad...
Click to expand...
Click to collapse
Keep your opinion towards you if u don't want to use it then just stay away
If no one can, I can build?
sonarkrishna said:
Keep your opinion towards you if u don't want to use it then just stay away
Click to expand...
Click to collapse
Hostile
Hi everyone.
After playing around with the camcorder, I came to this conclusion: Video recording works fine when shutter speed is over a value of approximately 25. Anything less than that, the phone starts dropping frames resulting in a horrible 14fps.
My request to any willing devs is this:
Can we modify the driver so that shutter speed doesn't drop below a certain value?
I sincerely believe that this would fix night time video.
Hello, we, 4PDA developers (@nhappymann @sad96 @serj87kz) have already made the second version of this fix. In it, the fix works on both the main and the front camera. Works on both 8.0 (Oreo) and 7.1.2 (Nougat)
Google drive: https://drive.google.com/folderview?id=1btN2_jom-j7alADnn4j6EoENDAM85pHQ
It's module for magisk v15+
sad96 said:
Thanks)
Click to expand...
Click to collapse
sad96 said:
Hello, we, 4PDA developers (@nhappymann @[email protected]) have already made the second version of this fix. In it, the fix works on both the main and the front camera. Works on both 8.0 (Oreo) and 7.1.2 (Nougat)
Google drive
https://drive.google.com/folderview?id=1btN2_jom-j7alADnn4j6EoENDAM85pHQ
It's module for magisk v15+
Click to expand...
Click to collapse
Thank you!
I was looking for something like this everywhere but couldn't find it.
Sorry for double posting, let's just hope that Xiaomi will issue an official fix too.
i think this only works in SnapDragon camera app?
This also fixes slow motion (120fps) with Google Camera?
adioph said:
i think this only works in SnapDragon camera app?
Click to expand...
Click to collapse
Works with every camera! Stock, Google etc!
Tested on oreo!
Works like a charm!
Works perfect. Thank you so much! I wish someone did such a good job with the sound also...
sad96 said:
Hello, we, 4PDA developers (@nhappymann @sad96 @serj87kz) have already made the second version of this fix. In it, the fix works on both the main and the front camera. Works on both 8.0 (Oreo) and 7.1.2 (Nougat)
Google drive: https://drive.google.com/folderview?id=1btN2_jom-j7alADnn4j6EoENDAM85pHQ
It's module for magisk v15+
Click to expand...
Click to collapse
Is these any fix like this for redmi note 4 snapdragon?
I am sorry for asking you here because I searched for hours and cannot find one! If mods like this exits, can you please tell me!
Thank you!
And one more thing I want to ask!
How to I apply these smoothness in Instagram camera while recording stories?
If its possible then let me know please!
Thanks!
Is there any way to make this work without root.
Very good job, videos are a lot smoother.
Slow motion still doesn't work in gcam.
Could you fix it? Thanks anyway!
sad96 said:
Hello, we, 4PDA developers (@nhappymann @sad96 @serj87kz) have already made the second version of this fix. In it, the fix works on both the main and the front camera. Works on both 8.0 (Oreo) and 7.1.2 (Nougat)
Google drive: https://drive.google.com/folderview?id=1btN2_jom-j7alADnn4j6EoENDAM85pHQ
It's module for magisk v15+
Click to expand...
Click to collapse
you are the best [emoji1360]
finally smooth video in snapchat app [emoji1360]
But unfortunately didn't work with Instagram app can you fix it?
and please can you send the link for original 4PDA thread for this module to find the upcoming update very quickly
sad96 said:
Hello, we, 4PDA developers (@[email protected]@serj87kz) have already made the second version of this fix. In it, the fix works on both the main and the front camera. Works on both 8.0 (Oreo) and 7.1.2 (Nougat)
Google drive: https://drive.google.com/folderview?id=1btN2_jom-j7alADnn4j6EoENDAM85pHQ
It's module for magisk v15+
Click to expand...
Click to collapse
The best module for MI A1
Stealtherthreat said:
Is there any way to make this work without root.
Click to expand...
Click to collapse
No
sipollo said:
Very good job, videos are a lot smoother.
Slow motion still doesn't work in gcam.
Could you fix it? Thanks anyway!
Click to expand...
Click to collapse
We now try to fix this, but seems it won't work
adioph said:
i think this only works in SnapDragon camera app?
Click to expand...
Click to collapse
Yes, see here https://forum.xda-developers.com/mi-a1/themes/magisk-fix-stable-fps-video-recording-t3754881
sipollo said:
This also fixes slow motion (120fps) with Google Camera?
Click to expand...
Click to collapse
No
jazzthe#1 said:
Is these any fix like this for redmi note 4 snapdragon?
I am sorry for asking you here because I searched for hours and cannot find one! If mods like this exits, can you please tell me!
Thank you!
Click to expand...
Click to collapse
Certanly. On 4pda such fixes exist exactly
---------- Post added at 03:09 PM ---------- Previous post was at 03:07 PM ----------
insan.waq3y1 said:
you are the best [emoji1360]
finally smooth video in snapchat app [emoji1360]
But unfortunately didn't work with Instagram app can you fix it?
and please can you send the link for original 4PDA thread for this module to find the upcoming update very quickly
Click to expand...
Click to collapse
All updates now would be posted on this thread: https://forum.xda-developers.com/mi-a1/themes/magisk-fix-stable-fps-video-recording-t3754881
sad96 said:
We now try to fix this, but seems it won't work
Click to expand...
Click to collapse
Hope this helps you find a proper fix.
https://forum.xda-developers.com/mi-a1/how-to/magisk-fix-slow-motion-google-camera-t3754280