So my galaxy nexus won't turn on or go into download mode or anything without connecting the charging cable to it.
Only response I get is when I connect it to charger it shows the battery is charged and then it goes away, I can go into download mode and stuff but as soon as I disconnect the charger, the display turns off. When I plug it in the computer it shows unrecognized usb device and then it goes away then it shows unrecognized device again(this happens in a loop).
how it supposedly got bricked: I was just using phone on a CFW(C-Rom on android 4.4.4), and after changing some voltage settings from some voltage control then applied, and then screen flickered and then it turned off, I turned it back on and everything was working but after 5 seconds same thing happened, then I turned off and on again and still same thing happened, after a few more tries it just stopped turning on ;-;
Fixed, the problem was the battery. All I had to do was replace it with a brand new one.
Related
Guys, I'll ask here first to see if it resolves. My gnex is defective.
With the phone turned off, connect the USB, I can not tun on. No charging icon appears, but he is.
With the phone on, if I connect to PC by USB, it just turn off.
With the phone on, putting the wall charger, the phone charging.
With it on, and go into standby after about 5 seconds, the unit turns off.
Was with the original ROM and now put the CM. But nothing changed. Something else might be? I'm using an old machine because it has no conditions.
I make a full wipe, davik, data and the problem still.
I hope I'm posting this in the right place but I'm desperate for help.
My phone, HTC 10, froze and then the screen turned off while I was taking a picture.
The charge should have been around 80%.
Symptoms:
The screen is unresponsive.
Couldn't get the home button/finger print sensor to turn the screen on.
Couldn't get the power button to turn the screen on.
A call to my phone could not reach my number as well.
When plugged in to a wall charger or laptop no indicator light turns on.
When connected to a laptop, the laptop makes that connection noise and a long name with QualComm in it shows up.
Tried Power Button + Volume Up for 10 seconds but didn't get any result.
Side note:
The power button was a little faulty before as well.
You have to squeeze it a certain way to make it work.
I need to somehow restart my phone. Any ideas?
PointOfViewGun said:
I hope I'm posting this in the right place but I'm desperate for help.
My phone, HTC 10, froze and then the screen turned off while I was taking a picture.
The charge should have been around 80%.
Symptoms:
The screen is unresponsive.
Couldn't get the home button/finger print sensor to turn the screen on.
Couldn't get the power button to turn the screen on.
A call to my phone could not reach my number as well.
When plugged in to a wall charger or laptop no indicator light turns on.
When connected to a laptop, the laptop makes that connection noise and a long name with QualComm in it shows up.
Tried Power Button + Volume Up for 10 seconds but didn't get any result.
Side note:
The power button was a little faulty before as well.
You have to squeeze it a certain way to make it work.
I need to somehow restart my phone. Any ideas?
Click to expand...
Click to collapse
Try to clean all buttons really well, if it keeps failing to boot and the phone is still recognized as Qualcomm it's probably bricked.
Simple explanation of the word bricked :
When the phone doesn't boot, when you can't access the bootloader, download mode or recovery it's bricked!
Mr Hofs said:
Try to clean all buttons really well, if it keeps failing to boot and the phone is still recognized as Qualcomm it's probably bricked.
Simple explanation of the word bricked :
When the phone doesn't boot, when you can't access the bootloader, download mode or recovery it's bricked!
Click to expand...
Click to collapse
Strange turn of events: I plugged the phone to my laptop because I read somewhere that it drains the battery. Just for the kicks, after a few hours, I unplugged and re-plugged my phone. Suddenly, there was light. The battery light came back. I immediately switched to the wall charger and once I did that the battery icon appeared showing 1%. Now, it's peacefully charging away. Will see if it actually turns on later on once it's charged about half an hour.
Hello, Huawei gadget friends.
My watch started to go in to a "low power boot loop" a week ago so I left it alone hoping a full drain would restore it back to working condition, but alas not.
So now this is the situation:
1) press button, nothing happens
2) connect to power shows the charging icon (white battery with power sign) and then after a few mins commences a boot loop as follows
3) from the charging icon, then gives the "Device software can't be checked for corruption..." message
4) followed by the red Huawei logo, then a single vibrate and then back to step 3 above
5) removing the watch from the charger stops the boot loop but then shows the low battery icon (white battery with one bar).
In one or two occasions, I saw it boot up to the colorful spinning 4 android wear logo, but did not complete (did not show "Android Wear" before rebooting again.
I have tried getting it to recovery mode screen or fastboot but without success -- I keep getting the second buzz without fail.
When the beta of 1.5 came out, I tried it, but since then, have wiped my mac and don't have the adb/fastboot software anymore. From reading the forums, there is now some new software called TWRP. Please advise what I can do.
Would I be right to suspect that it is some battery problem? Is it beyond help? :crying:
Thanks in advance!
MMM
Edit: I have also left it on for several hours charging (and rebooting constantly), thinking that perhaps it is just low battery -- but no success.
I'm experiencing the same problem, i turned it off yesterday at 17% and connected to the pc this morning to charge. I immediately noticed that it started looping with the white icon and it doesn't turn on, nor boots into download mode.
Have you found any way to restore it?
Mine doesn't show the red HW logo, charged for some hours and nothing.
I noticed that the pc see that there's something connected, but keeps saying "USB not recognized". I don't know what to do, i may open up and disconnect the battery
EDIT: SOLVED, it was just the cable that broke somehow. I soldered a new cable to the circular base but that didn't work, but as soon as i received this i connected to the pc and started pressing the button randomly till it showed the battery logo and started charging
I got this when I plugged it into my laptop. Plugging it into a dedicated USB charger solved my problem - I suspect the power rating on the USB socket wasn't high enough to charge effectively or that the USB socket is faulty in some other way. From what I understand, not all USB sockets are equal in that some are suitable for high-drain devices, some not so much. So trying another USB port on your computer may also help (Unfortunately at the time I was backing up to an external HDD on the other USB so that option wasn't open to me).
guyz, i have tried my method it actually worked on Xperia X Perfomance
When it goes to Bootloop for Drained battery, i just plug the cable and perform activity block method By pressing and holing power and both volume up and down and when it hits the 1st viberation i just simply release the key. (remember dont hold it too much long after 1st single viberation just release the keys ) and your phone will go to block activity mode. charging light will change it colors from red to blue.. after 2 minutes just press power button then you ll get another viberation and your phone will be seen as charged 2% and then it will be normal again...
i think it happens when battery drained and phone is unexpectedly trying to go boot in first place.
thank you
Hey guys, my brother give it to me a Moto G6 Play (XT1922-4 TYPEM380C), Because the cellphone dont turn on, only if I connected to light,
When I connect the phone, appears the Charge Logo like 2 seconds and then turn on to the boot screen, but it shutdown and it loops eternally (Only appears one time the Charge logo) Like (Bootscreen > Shutdown > Bootscreen > Shutdown)
Only stays on if I enter to the Recovery, but each option make the phone:
A)Freeze until disconnect from the light
B)The Bootscreen and shutdown loop
I tried with different chargers and no one charge, normal or turbo chargers, and I cant find any information about this,
What can I do for fix the cellphone?
Only one time I could turn up but it stays at the same spot, when I turn on, using the cellphone and "Loading" like 1 hour never got more than 0% using the same charger (Samsung Fast Charge)
SomaXKirbyto said:
Hey guys, my brother give it to me a Moto G6 Play (XT1922-4 TYPEM380C), Because the cellphone dont turn on, only if I connected to light,
When I connect the phone, appears the Charge Logo like 2 seconds and then turn on to the boot screen, but it shutdown and it loops eternally (Only appears one time the Charge logo) Like (Bootscreen > Shutdown > Bootscreen > Shutdown)
Only stays on if I enter to the Recovery, but each option make the phone:
A)Freeze until disconnect from the light
B)The Bootscreen and shutdown loop
I tried with different chargers and no one charge, normal or turbo chargers, and I cant find any information about this,
What can I do for fix the cellphone?
Only one time I could turn up but it stays at the same spot, when I turn on, using the cellphone and "Loading" like 1 hour never got more than 0% using the same charger (Samsung Fast Charge)
Click to expand...
Click to collapse
I had a similar problem with an old Moto E4 and I ended up taking it apart and disconnected the battery, plugged in phone turned it on. I let it loop for a few minutes, unplugged it, hooked up the battery, and reassembled it. Surprisingly it went to working and I don't believe they had any more trouble.
Have a P3XL that I'm I was going to load a custom image on. But I can't for the life of me get it to recognize having any form of usb data connection.
When I plug it in, it simply starts charging, no usb notification appears on the phone for adjusting the connection, the computer doesn't make a sound, nothing.
With the very same cable I can plug in a P6 and P3 and they will immediately be detected in the device manager.
I've tried messing with all the USB settings on the phone, turning them off, adjust the default use to File Transfer / etc... (note that none of this is from the usb notification, but the actual usb settings under preferences since it's unable to detect it's even attached!)
I'd had a couple issues with the port only charging sometimes so I bought a replacement charging assembly and installed that assuming that would make all my problems go away and while it definitely fixed the cable so it charges every time, it continues to refuse to be recognized as a device.
Does anyone have any ideas what would cause something like this and what might be wrong to cause it to not be recognized AT ALL (to re-iterate, the computer literally can't detect that a device was attached it's not doing anything, both with old and brand new charging port).
(One other quirk, not sure if it's related...The phone never actually stays off. If you power it down, it will power itself back on just a few seconds later. The power button itself isn't stuck and works perfectly for all the normal functions: tapping/holding etc.. And to be clear, it never shuts itself off randomly or anything like that, it's just if you hold the power button and choose "Power Off" it shuts down and then just reboots 2-3 seconds later)