Bricked, phones shows as RELINK HS-USB QDLoader 9008 in Device Manager, I am S-OFF - One (M9) Q&A, Help & Troubleshooting

Hello,
Not sure how I did it, but my Sprint HTC M9 is bricked. It shows as "RELINK HS-USB QDLoader 9008" in my laptop's device manager. I am S-OFF, is there any way I can fix it or is it a total loss?
Thanks in advance
cheers,
disco

As far as I know, you need a JTAG device and the knowledge how to use it for recovering a HTC phone from that state. I have neither, sorry.

Thanks. I have alot of experience with JTAG, anyone know where the points are on the board?
Cheers,
Disco

Related

LG G3 D850 AT&T "Brick" in "RELINK HS-USB QDLoader 9008" mode

Hi everyone
i have problem in my phone won't turn on
i think i lost the bootloader and i try the that method how unbrick by using b2b.exe but didn't working
maybe bcuz my phone show in computer RELINK HS-USB QDLoader 9008 not Qualcomm HS-USB QDLoader 9008
heeeeelp me please
it's new phone . still didn't enjoy with it yet
just 2 days :crying::crying::crying::crying:
lg g flex 2 relink hs-usb qdloader 9008
i have same problem after trying to flash stock rom my phone boot corrapted. and now my computer only recognize as relink hs-usb QDloader 9008
you got different drivers installed..one makes it connect with relink and other with qualcomm..
i have a bricked d851..
but i havent found a working boarddiag or any other solution..phones still bricked
phone only connects in qualcomm 9008 if i short out motherboard pins..
phone connects in relink 9008 even without shorting(if i install relink drivers)
khalidou said:
Hi everyone
i have problem in my phone won't turn on
i think i lost the bootloader and i try the that method how unbrick by using b2b.exe but didn't working
maybe bcuz my phone show in computer RELINK HS-USB QDLoader 9008 not Qualcomm HS-USB QDLoader 9008
heeeeelp me please
it's new phone . still didn't enjoy with it yet
just 2 days :crying::crying::crying::crying:
Click to expand...
Click to collapse
You go to this page will help you (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359) good luck
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
asaxda said:
i have same problem after trying to flash stock rom my phone boot corrapted. and now my computer only recognize as relink hs-usb QDloader 9008
Click to expand...
Click to collapse
You go to this page will help you (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359) good luck
asaxda said:
i have same problem after trying to flash stock rom my phone boot corrapted. and now my computer only recognize as relink hs-usb QDloader 9008
Click to expand...
Click to collapse
did you find anyway to solve that RELINK problem?
leveridge said:
did you find anyway to solve that RELINK problem?
Click to expand...
Click to collapse
did you find any solution
I have the same prob with Mega GT-I9200 . No sign of life besides that chime coming up when attached to PC and recognizes as Relink 9008. I have to touch the buttons on the phone to wake it up though. Completely messed up. Died while I was reading mails. thats it! I really want to fix that phone! I loved it no matter how ugly it was.
Troubel
khalidou said:
Hi everyone
i have problem in my phone won't turn on
i think i lost the bootloader and i try the that method how unbrick by using b2b.exe but didn't working
maybe bcuz my phone show in computer RELINK HS-USB QDLoader 9008 not Qualcomm HS-USB QDLoader 9008
heeeeelp me please
it's new phone . still didn't enjoy with it yet
just 2 days :crying::crying::crying::crying:
Click to expand...
Click to collapse
already found your problem?

Bricked 10, QualComm 9008 and 900E. Any solutions?

Hi,
My 10 is hard bricked. I was connected to pc standart usb c cable pc shows "Qualcomm HS-USB Diagnostic 900E" and i was connected to pc EDL cable, shows "Qualcomm HS-USB QDloader 9008". But i don't have QFIL rom for this phone. Anyone have it? or anyway stock files convert to QFIL rom?
Sorry my english :angel:
Up!
Go to HTC if your phone still have warranty

Hard Brick

Is there any solution to recover a hard bricked Robin? Meaning i have no access to any form of recovery except qualcomm hs-usb qdloader 9008.

qualcomm hs-usb qloader 9008 (com3) hardbrick

please help as i and others it seems have hardbricked our devices during factory flashing stock img
does anyone know how to recover this as phone is Dead
thanks for any help

EDL Mode Fix

I need help, I have a HTC ONE M9 here which is in EDL mode, I just can't get this out of there...
it is displayed in the device manager as qualcomm hs-usb qdloader 9008.
I tried it with qpst and qfile both without success, especially because I need an xml file where I don't even know what for and what for.
I would be grateful if someone could help me.

Categories

Resources