OxygenOS cleaned my internal storage - OnePlus 3 Questions & Answers

After installing OxygenOS 3.2.8 I always have totally cleaned storage idk why
someone have this?
Installing oos from cm13 sultan
(sorry for my english)

RKBD said:
After installing OxygenOS I always have totally cleaned storage idk why
someone have this?
Installing oos from cm13 sultan
(sorry for my english)
Click to expand...
Click to collapse
Happened to me too. Flashed it via TWRP.

showofdeth said:
Happened to me too. Flashed it via TWRP.
Click to expand...
Click to collapse
which rom are you comming/firmware

RKBD said:
which rom are you comming/firmware
Click to expand...
Click to collapse
Marshmallow FreedomOS

RKBD said:
After installing OxygenOS I always have totally cleaned storage idk why
someone have this?
Installing oos from cm13 sultan
(sorry for my english)
Click to expand...
Click to collapse
You should thanks OOS for doing that.
Otherwise you would have got a bootloop, CM and OOS data are not compatible.

Simone98RC said:
You should thanks OOS for doing that.
Otherwise you would have got a bootloop, CM and OOS data are not compatible.
Click to expand...
Click to collapse
thanks oos for deleting all my important photos :good:

Simone98RC said:
You should thanks OOS for doing that.
Otherwise you would have got a bootloop, CM and OOS data are not compatible.
Click to expand...
Click to collapse
also im only wipe data and cache nothing else and i can install all rom's without bootloop (i must find old links with oos 3.2.8)

RKBD said:
thanks oos for deleting all my important photos :good:
Click to expand...
Click to collapse
When you change firmware you MUST do a backup.
Even if factory reset is not required (not in your case)
---------- Post added at 15:55 ---------- Previous post was at 15:53 ----------
RKBD said:
also im only wipe data and cache nothing else and i can install all rom's without bootloop (i must find old links with oos 3.2.8)
Click to expand...
Click to collapse
Link is still reachable from the official website: http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.8

Simone98RC said:
When you change firmware you MUST do a backup.
Even if factory reset is not required (not in your case)
---------- Post added at 15:55 ---------- Previous post was at 15:53 ----------
Link is still reachable from the official website: http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.8
Click to expand...
Click to collapse
this probably is new link becouse i don't have this problem before

thanks for @amdtip
https://drive.google.com/file/d/0B_JpVuAKlVV0YWFJcGRpWkFDOEU/view

i have notice that a long day ago (before i think its by debloater)

Related

[ROM][DEV][6.0.1]Lineage OS. Working! GT-i9300i

Port by MAXIMUS96, ported from Grand2
TESTED ONLY GT-I9300I, PLS TEST ON GT-I9301I​
Bugs:
1)Rear camera is don't working.
2)Searching....
Installation
1)Download this rom link: https://cloud.mail.ru/public/M8PS/U4p9iv1rB
2)Download path (touch fix)
3)Install TWRP
4)INSTALL ORIGINAL 4.4.4 FIRMWARE
5)Install this rom
6)Install path
Reboot, and enjoy!
Please test this rom, and send logcat, i'm recommended CatLog&ADB logcat​​link: https://cloud.mail.ru/public/M8PS/U4p9iv1rB
*REAR CAMERA DON'T WORKING, FIX,my english is bad
Hey Romka, Im gonna test it on the GT-I9301I. Thanks for the build I can send the log on telegram?
Do i really have to flash stock 4.4.4? Im on cm 12.1
Thank you very much
nosoycamachis said:
Do i really have to flash stock 4.4.4? Im on cm 12.1
Thank you very much
Click to expand...
Click to collapse
We will see, I'm using Dualboot xD But for now, it looks good.
Poolitzer said:
Hey Romka, Im gonna test it on the GT-I9301I. Thanks for the build I can send the log on telegram?
Click to expand...
Click to collapse
Yes, send me @RomkaZVO
First Test
First Test
So, everybody:
I installed it with the DualBootPatcher on my external SD-card. Everything worked fine. So I can gladly say: You are able too install and use this ROM, even if you are not on stock. But I have found some issues:
SD-Card is called unusal. This could also be only my problem, because of the dualboot. We would need somebody who can try it also.
Camera is not working. Immedialty crashing.
Some random crashes. But they are gone away when I reopen the App. E.g. open the contact over the dial app. I will try to capture them, but its hard, because they are random.
Device name is Grand 2, not S3 Neo.
When installing an App from google play, it stucks in the download image and gets removed from the status bar. It seems to happen bevore the download progress finishes and the installing progress starts. But eventually, it comes up again in the status bar and then finishes.
Sometimes, the Apps in Google Play dont show the rigths they want, they just install.
Two SIM-Cards avaible, even if my S3-Neo just have one slot.
Random lags
It feels like I m experience some hard performance issues. Maybe use Ciros buil.prop?
Youtube-App does not work probably. Maybe also performance?
Sensors do not work.
The status bar freezes sometime. When this happens, you cant see the open apps via holding long time the down-button. Its just a clean background.
One random reboot.
Something to add?
Is it working on i9301i?
Korax94 said:
Is it working on i9301i?
Click to expand...
Click to collapse
Jeah, it works.
You just need to install KitKat if your last stock firmware was JellyBean
---------- Post added at 12:06 AM ---------- Previous post was at 12:06 AM ----------
But if you are using some Custom ROM for S3 Neo, it means your last stock firmware was KitKat
nosoycamachis said:
Do i really have to flash stock 4.4.4? Im on cm 12.1
Thank you very much
Click to expand...
Click to collapse
I`m installed this rom up cm 12.1, system don't started.
Romka_ZVO said:
I`m installed this rom up cm 12.1, system don't started.
Click to expand...
Click to collapse
Was your stock system bevore cm Android 4.4? Whatever, I would suggest that you install 4.4 and then, try to install lineage But maybe the dev has other ideas.
Romka_ZVO said:
I`m installed this rom up cm 12.1, system don't started.
Click to expand...
Click to collapse
Did you do a clean install?
working for gt-i9301i but hanging too much
can you fix the solution for gt-i9301i
Touch doesn't work please help
Is there any solution for this problem
cobra2015 said:
Is there any solution for this problem
Click to expand...
Click to collapse
What do you mean with touch? The touch display is working?
---------- Post added at 10:17 PM ---------- Previous post was at 10:16 PM ----------
maynardrod said:
can you fix the solution for gt-i9301i
Click to expand...
Click to collapse
I just start to improve the build.prop, I will see. But this could help.
Touch screen doesn't work???
I mean the touch screen doesn't work when i install this rom on gt-i9301i
cobra2015 said:
I mean the touch screen doesn't work when i install this rom on gt-i9301i
Click to expand...
Click to collapse
Ok. Thats quite interesting. Whipe everything and reinstall it?
cobra2015 said:
I mean the touch screen doesn't work when i install this rom on gt-i9301i
Click to expand...
Click to collapse
Install attached fix
Woah! That is nice! Im not gonna test in now, but i'll come back later. For Sure!...:laugh:

[ROM][Unofficial][Nougat 7.1.2]Oct-2018 Security Patch[Z00L][Z00T]

Hi all,
Below ROM I built for my use with latest security patch.
The reason for nougat is because I observed very good battery backup compared to Oreo.
1 AOKP ROM
Z00L
aokp_Z00L_nougat_unofficial_2018-11-09_1508.zip
https://androidfilehost.com/?fid=11410963190603843344
2 LineageOS
Z00L
lineage-14.1-20181121-UNOFFICIAL-Z00L.zip
https://www.androidfilehost.com/?fid=11410963190603855863
Z00T
lineage-14.1-20181122-UNOFFICIAL-Z00T.zip
https://www.androidfilehost.com/?fid=11410963190603856964
3 Mokee
Z00L
Mokee_71.2-z00l-20181029-UNOFFICIAL.zip
https://androidfilehost.com/?fid=11410932744536991170
4 XenonHD
Z00L
XenonHD-7.1.2-181114-Unofficial-Z00L.zip
https://androidfilehost.com/?fid=11410963190603846686
Thanks
SacMah2014
More info
AOKP is still alive?
$tar said:
AOKP is still alive?
Click to expand...
Click to collapse
Yes, these ROM coming with latest security and development is not more.
sachinm said:
Yes, these ROM coming with latest security and development is not more.
Click to expand...
Click to collapse
I haven't try other rom, but in AOKP can't install Instagram, said it's not compatible, chrome and other google apps also
AOKP good ROM
Very fast
Tanx @sachinm
amin1457 said:
AOKP good ROM
Very fast
Tanx @sachinm
Click to expand...
Click to collapse
Haven't u encounter any "your device isn't compatible" bug?
To have a fast rom ...
Use the following application ...(RAM manager)
Select the settings according to the photo ...
amin1457 said:
To have a fast rom ...
Use the following application ...(RAM manager)
Select the settings according to the photo ...
Click to expand...
Click to collapse
Which ROM?
amin1457 said:
To have a fast rom ...
Use the following application ...(RAM manager)
Select the settings according to the photo ...
Click to expand...
Click to collapse
Lazynestor said:
Which ROM?
Click to expand...
Click to collapse
any rom
Excuse me, but what version of GAPPS are you guys using?
$tar said:
Excuse me, but what version of GAPPS are you guys using?
Click to expand...
Click to collapse
https://opengapps.org/
ARM64->Android 7.1-> Any Varient
XenonHD 7.1.2 ROM link added.
Changelog : Oct-2018 security patch.
$tar said:
Haven't u encounter any "your device isn't compatible" bug?
Click to expand...
Click to collapse
Me too faced this problem in some ROMs, I thinks in aim ROM, how solve this
---------- Post added at 02:51 AM ---------- Previous post was at 02:41 AM ----------
sachinm said:
Hi all,
Below ROM I built for my use with latest security patch.
The reason for nougat is because I observed very good battery backup compared to Oreo.
1 AOKP ROM
aokp_Z00L_nougat_unofficial_2018-11-09_1508.zip
https://androidfilehost.com/?fid=11410963190603843344
2 LineageOS
lineage-14.1-20181101-UNOFFICIAL-Z00L.zip
https://androidfilehost.com/?fid=11410932744536993296
3 Mokee
Mokee_71.2-z00l-20181029-UNOFFICIAL.zip
https://androidfilehost.com/?fid=11410932744536991170
4 XenonHD
XenonHD-7.1.2-181114-Unofficial-Z00L.zip
https://androidfilehost.com/?fid=11410963190603846686
Thanks
SacMah2014
Click to expand...
Click to collapse
Thanks for updated nougat ROMs, please tell me which ROM you are using for daily basis, I need very stable nougat ROM for my cousin, who don't know anything about mobiles and not living near me, please recommend a ROM with zero bugs
himfa71 said:
Me too faced this problem in some ROMs, I thinks in aim ROM, how solve this
---------- Post added at 02:51 AM ---------- Previous post was at 02:41 AM ----------
Thanks for updated nougat ROMs, please tell me which ROM you are using for daily basis, I need very stable nougat ROM for my cousin, who don't know anything about mobiles and not living near me, please recommend a ROM with zero bugs
Click to expand...
Click to collapse
As per my opinion lineage os is the best...it give huge battery....most stable rom
@sachinm sir, what flashing instruction you use for the ROMs above?
$tar said:
@sachinm sir, what flashing instruction you use for the ROMs above?
Click to expand...
Click to collapse
First take backup of all current used application using Titanium Backup with data.
Backup your existing ROM using TWRP.
Wipe Dalvik/Cache/System/Data(excluding internal)
Install any nougat rom.
First boot will take some time.
Restore all/selective application from Titanium backup.
sachinm said:
First take backup of all current used application using Titanium Backup with data.
Backup your existing ROM using TWRP.
Wipe Dalvik/Cache/System/Data(excluding internal)
Install any nougat rom.
First boot will take some time.
Restore all/selective application from Titanium backup.
Click to expand...
Click to collapse
Bro is there any build of lineage 14.1 for zoot
syed sadik vali said:
Bro is there any build of lineage 14.1 for zoot
Click to expand...
Click to collapse
As of now only GroovyAndroid is available for Z00T. No plan yet.

miui 10 pie available for whyred

found
https://drive.google.com/open?id=1p6Soa-pi4DtEX-mZc24yCd3i7oVjIwSO
Thank bro
Bugs?
Unable to boot.
Only Mi logo with powered by Android message appears but booting.....n only booting from morning to night tried several times . Please help anyone
kbsarfaraz said:
Unable to boot.
Only Mi logo with powered by Android message appears but booting.....n only booting from morning to night tried several times . Please help anyone
Click to expand...
Click to collapse
Format data after installing ROM
drmuruga said:
found
https://drive.google.com/open?id=1p6Soa-pi4DtEX-mZc24yCd3i7oVjIwSO
Click to expand...
Click to collapse
Where found this?^_^
Make a little review or bug list at least
galeip said:
Make a little review or bug list at least
Click to expand...
Click to collapse
And how to install it
---------- Post added at 09:05 PM ---------- Previous post was at 09:05 PM ----------
drmuruga said:
found
https://drive.google.com/open?id=1p6Soa-pi4DtEX-mZc24yCd3i7oVjIwSO
Click to expand...
Click to collapse
Did you try it?
Ra2rd said:
Format data after installing ROM
Click to expand...
Click to collapse
While rebooting shows no os installed on twrp after wiping data also its goes to continues boot screen
This is obviously fake.
Ra2rd said:
Format data after installing ROM
Click to expand...
Click to collapse
Done! But still the same
AmoghUpadhyay said:
This is obviously fake.
Click to expand...
Click to collapse
I agree
Kernel version displays mcaosp, it maybe custom ROM
Anyone has tried it?
SunilSuni said:
Kernel version displays mcaosp, it maybe custom ROM
Click to expand...
Click to collapse
Status bar looks tall, looks like a port from a xiaomi device with notch
It not a fake. got from telegram group. not a official rom. cutom rom.
It is not a fake I installed it
I made usual wipes flash the rom flash latest magisk and then wipe data and reboot
.
Not fake. It is a port from Mi 8 Lite.
There should be some instructions on how to install it.
Anyone flash it? Is it stable? Any bug? Smoothness?
eureka9092000 said:
Anyone flash it? Is it stable? Any bug? Smoothness?
Click to expand...
Click to collapse
Theme is not working well cant change wallpaper onnlockscreen bit I was on the ROM forma half hour iy semms to work well
Wrong Rom
drmuruga said:
found
https://drive.google.com/open?id=1p6Soa-pi4DtEX-mZc24yCd3i7oVjIwSO
Click to expand...
Click to collapse
The ROM is not for redmi note 5 pro. Well i guess you tried to port it from Mi 8 lite. But failed as little knowledge is always dangerous.

Lineage os 17

Hey guys, If You search for "crosshatch" on Androidfilehost.com You will See an unofficial Lineage 17 build.
I've Download it but i want to know how to flash with adb, since twrp is Not Out for Android 10 on the Pixel 3 XL.
I think you have to use fastboot to flash the boot/recovery image he has listed right below then go into recovery and apply update from adb and sideload the zip
---------- Post added at 02:19 AM ---------- Previous post was at 01:39 AM ----------
Tried but I just get stuck on google logo at boot. You'd probably be better off just using Havoc OS its very easy to install and runs on android 10
Superspylee10 said:
I think you have to use fastboot to flash the boot/recovery image he has listed right below then go into recovery and apply update from adb and sideload the zip
---------- Post added at 02:19 AM ---------- Previous post was at 01:39 AM ----------
Tried but I just get stuck on google logo at boot. You'd probably be better off just using Havoc OS its very easy to install and runs on android 10
Click to expand...
Click to collapse
Hey mate! I tried the Rom after creating this Forum.
I also got stuck on the Google boot Logo. Ya i'm on havoc since days ?
francois amon said:
Hey mate! I tried the Rom after creating this Forum.
I also got stuck on the Google boot Logo. Ya i'm on the havoc since days [/QU
Hahaha sweet then good to hear. Im enjoying Havoc so far
Click to expand...
Click to collapse
Superspylee10 said:
francois amon said:
Hey mate! I tried the Rom after creating this Forum.
I also got stuck on the Google boot Logo. Ya i'm on the havoc since days [/QU
Hahaha sweet then good to hear. Im enjoying Havoc so far
Click to expand...
Click to collapse
Which Kernel are u using btw?
Click to expand...
Click to collapse
francois amon said:
Superspylee10 said:
Which Kernel are u using btw?
Click to expand...
Click to collapse
ElementalX right now. its the only one iv tried
Click to expand...
Click to collapse
Thanks @razorloves for making a build. Hopefully the issues are easy to resolve.
So far no issue here (running a Test build, which is to be honest pretty stabile) ?
Update: Yap its stable. No Problem Here. Daily Drive ready!
Yes it has been solved. Have you tried it out?
Sent from my Pixel 3 XL using Tapatalk
francois amon said:
So far no issue here (running a Test build, which is to be honest pretty stabile)
Click to expand...
Click to collapse
Could you provide flashing instructions?
He has a Thread, where u can find the flashing steps.
https://forum.xda-developers.com/pi...om-lineage-17-0-pixel-3-xl-blueline-t4010943/
francois amon said:
He has a Thread, where u can find the flashing steps.
https://forum.xda-developers.com/pi...om-lineage-17-0-pixel-3-xl-blueline-t4010943/
Click to expand...
Click to collapse
Aah I was to fast. Saw it seconds later after my post . Thanks anyway
Awesome, Seems smooth so far
Has anyone tried if the DSDS is enabled with Lineage OS?
zhtlancer said:
Has anyone tried if the DSDS is enabled with Lineage OS?
Click to expand...
Click to collapse
Post this question here: https://forum.xda-developers.com/pi...om-lineage-17-0-pixel-3-xl-blueline-t4010943/

op8pro havoc gsi

Sharing only,, OnePlus 8 pro are any arm64 A / B device Android 10 gsi havoc, https://sourceforge.net/projects/havoc-os/files/a64-ab/
without twrp instructions can be found in this link , would like to know how this is on op8pro, https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Very interesting, I was thinking to flash a GSI as soon as TWRP is available
Thanks
Are you aware you'll probably lose device specific features ? As alert slider or 120Hz / QHD-FHD / DC Dimming etc.
---------- Post added at 08:40 AM ---------- Previous post was at 08:37 AM ----------
BTW You're in the wrong section I think
Neil_Armstrong_ said:
Very interesting, I was thinking to flash a GSI as soon as TWRP is available
Thanks
Are you aware you'll probably lose device specific features ? As alert slider or 120Hz / QHD-FHD / DC Dimming etc.
---------- Post added at 08:40 AM ---------- Previous post was at 08:37 AM ----------
BTW You're in the wrong section I think
Click to expand...
Click to collapse
Yeah I think your right . I'm not going to try it just yet until some feedback shows up
if anyone is feeling brave try flashing it via Chinese TWRP.
Nekromantik said:
if anyone is feeling brave try flashing it via Chinese TWRP.
Click to expand...
Click to collapse
I've looked into this twrp and being the op8pro is the a/b partition like the OnePlus 6 and up there has to be a twrp installer as well . Say we had a rom to try there is a certain flashing process
Nekromantik said:
if anyone is feeling brave try flashing it via Chinese TWRP.
Click to expand...
Click to collapse
Is there actually a Chinese twrp for the op8pro? Or just saying?
Cozzeck said:
Is there actually a Chinese twrp for the op8pro? Or just saying?
Click to expand...
Click to collapse
Yes
It can flash and backup kernel but thats all I tested
Nekromantik said:
Yes
It can flash and backup kernel but thats all I tested
Click to expand...
Click to collapse
Can you post links so I can take a look at it?
Cozzeck said:
Can you post links so I can take a look at it?
Click to expand...
Click to collapse
against XDA rules
Search google for wsx150 oneplus8 twrp
Cozzeck said:
Is there actually a Chinese twrp for the op8pro? Or just saying?
Click to expand...
Click to collapse
I'm running it, works just fine.
DanneSwe said:
I'm running it, works just fine.
Click to expand...
Click to collapse
Can you mount system with it?
pyry666 said:
Can you mount system with it?
Click to expand...
Click to collapse
yes it mounts the new super partition
Nekromantik said:
against XDA rules
Search google for wsx150 oneplus8 twrp
Click to expand...
Click to collapse
I googe it but no result.
Could you please share link in privet message or give any hint
Thanks,
musicman5844 said:
without twrp instructions can be found in this link , would like to know how this is on op8pro, https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Click to expand...
Click to collapse
If they are img files you could flash through fastboot d
toolhas4degrees said:
If they are img files you could flash through fastboot d
Click to expand...
Click to collapse
Ok I've never flashed a file like this in fastboot
al-motamel said:
I googe it but no result.
Could you please share link in privet message or give any hint
Thanks,
Click to expand...
Click to collapse
It's wzsx150
DanneSwe said:
I'm running it, works just fine.
Click to expand...
Click to collapse
I have the Chinese .25 version, but it doesn't stick on reboot. Is there a newer version that's sticking on reboot?
Burt Squirtz said:
I have the Chinese .25 version, but it doesn't stick on reboot. Is there a newer version that's sticking on reboot?
Click to expand...
Click to collapse
did you do fastboot boot or fastboot flash?
musicman5844 said:
Sharing only,, OnePlus 8 pro are any arm64 device Android 10 gsi havoc, https://sourceforge.net/projects/havoc-os/files/a64-ab/
Click to expand...
Click to collapse
It's arm64-ab by the way

Categories

Resources