LineageOS for Xperia M - Sony Xperia M

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community-built and open source distribution of Android. It's released after the CyanogenMod end of support.
Device-specific source code:
Device
Kernel
What's working/tested (by PecanCM):
RIL (Calls, SMS, Mobile Data)
Dual sim on M dual (check notes section)
Display
Camera (photos, camcorder)
Audio and video
Wifi
Bluetooth
OpenGL rendering
Sensors (accelerometer,compass,light,proximity)
Sdcard
Auto brightness
Notification led
Wifi,Bluetooth and USB tethering
NFC
GPS
Adoptable storage
Not working/untested: Same as CM14.1
XDA:DevDB Information
LineageOS, ROM for the Sony Xperia M
Contributors
extremetek, PecanCM, FXP team and people who is working on Sony, CyanogenMod, CodeAurora Forum, CyanogenMod/Lineage
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Testing
Created 2017-01-23
Last Updated 2017-01-22

I have official CM14.1, can I install it without lost my data from apps, photos...?

Hi all. @extremetek: Will this be the official LineageOS thread for our device? Thanks for all your efforts.

YES!!!!! Its here
e-bert said:
Hi all. @extremetek: Will this be the official LineageOS thread for our device? Thanks for all your efforts.
Click to expand...
Click to collapse
Check out the official lineage os website
go to downloads of lineage os

rajveermalviya said:
Check out the official lineage os website
go to downloads of lineage os
Click to expand...
Click to collapse
Yes, thank you, I've seen that. But, where is the official discussion thread for these builds?

e-bert said:
Yes, thank you, I've seen that. But, where is the official discussion thread for these builds?
Click to expand...
Click to collapse
Here it is, https://forum.xda-developers.com/showthread.php?t=3548563

Related

[ROM] [OFFICIAL] CM13.0 Nightlies for SGH-i747

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Yes, it's finally here. This is the support thread for CM13.0 on the AT&T Galaxy S3. All bug reports must be submitted with a log - please attach to your post. See here on how to provide a log. Feature requests will be ignored, I only work to make the ROM stable on this phone, I do not work on major enhancements to the ROM itself.
Known issues:
Front camera does not work in some apps like Retrica and Instagram.
Install instructions:
1. Install TWRP Recovery for "d2att".
2. Download your correct, updated bootloader/modem. For the US variant you should be on NJ1 or NJ2.. Note that you must do MJB -> NE4 -> NJ1 -> NJ2 in order. After MJB you can no longer downgrade your bootloader! Be warned if you are coming from earlier versions. See here for the NJ1/NJ2 files for the US d2att. I will add links for SGH-i747m if someone sends them to me.
3. Get the nightly build here.
4. Install GAPPS - get it here - select ARM, 6.0 and the version you want (stock, full, mini, etc)
5. Reboot into recovery and install everything - CM13 and GAPPS must be installed at the same time.
Follow the changelog!
http://www.cmxlog.com/13/
Known Issues: CM13 still has camera issues. Use Open Camera or Camera FV-5. Both available in Google Play store.
Framework of this post brought to you by CM11 and CM12
XDAevDB Information
CyanogenMod for d2att, ROM for the AT&T Samsung Galaxy S III
Contributors
matrixzone, arunscape - a huge thank you to both, without them these Nightlies would not have happened.
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: NJ1 bootloader/modem
Based On: CyanogenMod
Version Information
Status: Nightly
Post will be updated as time progresses.
PLEASE DONATE TO MATRIXZONE IF YOU FIND THESE BUILDS USEFUL.
Are you the developer/maintainer?
If you are not the maintainer, does the maintainer have a XDA Account?
Official thread is here: http://forum.xda-developers.com/galaxy-s3-att/development/unofficial-cyanogenmod-12-t2968854. Thread closed and moved to regular development.

[ROM] [6.0.1] Official CyanogenMod 13

CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the official Build of CM 13 for the OnePlus 2 (all variants).
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
OnePlus warranty covers software modifications.
Installation Instructions
You must unlock your bootloader via fastboot.
Make sure you flashed OOS Beta 2!
You must have a custom recovery installed
Go to http://get.cm/?device=oneplus2 and download the latest CM13.0 nightly.
Locate 6.0 Gapps via a quick Google search.
Fully wipe your device from Recovery if you are not coming from CM13.0 already.
Reboot into recovery and install.
* Note:
Flash gapps after your flashed the rom (don't only flash the rom and reboot)! If you don't do so you have to do a full wipe in order to use google services.
Changelog
You can find the latest Changelog here
Github
Kown Issues
Encryption is broken! Blame OnePlus, it's not working on OOS 3 either.
XDA:DevDB Information
CyanogenMod OnePlus2, ROM for the OnePlus 2
Contributors
Grarak, ciwrl, RaymanFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader unlocked, OOS Open Beta 2
Version Information
Status: Nightly
Created 2016-06-04
Last Updated 2016-06-17
Hell yeah ????
Sent from my OnePlus 2
Yeah....finally!!! Thanks so much. The wait is finally over :highfive:
It's here! Finally! [emoji1]
Sent from my A0001 using Tapatalk
There it is! Awesome work buddy!!!
I'm kinda disappointed they didn't use the unofficial codename "taco".
Kinda looks out of place: bacon, onyx, oneplus2...
Finally! Great work!
Enviado desde mi A0001 mediante Tapatalk
Thank you so much Grarak! I've been waiting for this day ever since I bought OP2!
What's the best recovery to use with this?
Sent from my OnePlus 2 using Tapaltalk
Omg! Its finally here. Thanks for your great work
Sent from my oneplus2 using Tapatalk
I am right now on H2OS MM with it firmware. I can flash or I need revert back to H2OS LP firmware?
pure.by said:
Thank you so much Grarak! I've been waiting for this day ever since I bought OP2!
What's the best recovery to use with this?
Sent from my OnePlus 2 using Tapaltalk
Click to expand...
Click to collapse
https://twitter.com/Grarak/status/738807862521176064 here you go enjoyyy
We missed you a lot here @Grarak
Guihardrock said:
https://twitter.com/Grarak/status/738807862521176064 here you go enjoyyy
Click to expand...
Click to collapse
Thanks. I've read that twit but the link does not work.
Sent from my OnePlus 2 using Tapaltalk
battery life?
Grarak said:
CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
This is the official Build of CM 13 for the OnePlus 2 (all variants).
To hear about the latest updates and changes to CyanogenMod as a whole, please follow +CyanogenMod on Google+!​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
OnePlus warranty covers software modifications.
Installation Instructions
You must unlock your bootloader via fastboot.
Make sure you flashed OOS Beta 2!
You must have a custom recovery installed
Go to http://get.cm/?device=oneplus2 and download the latest CM13.0 nightly.
Locate 6.0 Gapps via a quick Google search.
Fully wipe your device from Recovery if you are not coming from CM13.0 already.
Reboot into recovery and install.
* Note:
Flash gapps after your flashed the rom (don't only flash the rom and reboot)! If you don't do so you have to do a full wipe in order to use google services.
Changelog
You can find the latest Changelog here
Github
Kown Issues
Encryption is broken! Blame OnePlus, it's not working on OOS 3 either.
XDA:DevDB Information
CyanogenMod OnePlus2, ROM for the OnePlus 2
Contributors
Grarak, ciwrl, RaymanFX
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader unlocked, OOS Open Beta 2
Version Information
Status: Nightly
Created 2016-06-04
Last Updated 2016-06-04
Click to expand...
Click to collapse
Sorry for quoting your post but do you have a working link of your twrp trying to find but not being able to find anywhere
Verstuurd van mijn ONE A2003 met xda Forums PRO
Thanks Grarak for the official cm13 for op2..
Op2 development finally seems to be now on track
Thanks a ton
Awesome
Hell yeah
pure.by said:
Thanks. I've read that twit but the link does not work.
Sent from my OnePlus 2 using Tapaltalk
Click to expand...
Click to collapse
https://mega.nz/#!Y1pEgRQQ!AcG8uYX1lAn29MfbeOkHWrfjjBUfVmq0Ck7_p7nj_Vo :3
Expect the unexpected
That's Awesome :good:
I was waiting for this official since i bough OP2 :highfive:

[ROM][OFFICIAL][SEED][7.1.2][Qualcomm] LineageOS 14.1 for Android One 2nd Gen

LineageOS 14.1
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
[/CENTER]
Note: This is for the Qualcomm (MSM8916) variant only. This will not work on the Mediatek version and should not, for any reason, be installed on Mediatek devices.
Download
https://download.lineageos.org/seed
Sources
Device Tree
Kernel
XDA:DevDB Information
LineageOS 14.1 ROM for Android One Seed, ROM for the OEM Cross Device Development
Contributors
arvinquilao
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader, Official TWRP 3.1.0-0
Version Information
Status: Nightly
Created 2016-11-02
Last Updated 2017-05-07
Reserved
Reserved
Could you please fix the link, because right now it's leading to some dev settings hidden from not logged in users.
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access.
DGooseman said:
Could you please fix the link, because right now it's leading to some dev settings hidden from not logged in users.
Click to expand...
Click to collapse
adem35 said:
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access.
Click to expand...
Click to collapse
Fixed!
arvinquilao said:
Fixed!
Click to expand...
Click to collapse
thank's
lava pixel v1
does this work for lava pixel v1?
tejas.g said:
does this work for lava pixel v1?
Click to expand...
Click to collapse
No. See the note in the original post.
New build uploaded: https://androidfilehost.com/?fid=385035244224396541
arvinquilao said:
CyanogenMod 14.1
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Note: This is for the Qualcomm (MSM8916) variant only. This will not work on the Mediatek version and should not, for any reason, be installed on Mediatek devices.
What's Broken
[*] Reboot menu
Download
Seed - CyanogenMod 14.1
Sources
Device Tree
Kernel
Vendor
XDA:DevDB Information
CyanogenMod 14.1 ROM for Android One Seed, ROM for the OEM Cross Device Development
Contributors
arvinquilao
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader, Official TWRP 3.0.2-1
Version Information
Status: Alpha
Created 2016-11-02
Last Updated 2016-11-11
Click to expand...
Click to collapse
Does not see any sim card contacts 181 people but import "0" looks
Does this ROM work if i did an adb sideload with stock recovery
Nexxit99_Gaming said:
Does this ROM work if i did an adb sideload with stock recovery
Click to expand...
Click to collapse
No. Only officially signed zips can be sideloaded using stock recovery. The general rule is to use custom recovery when flashing custom roms.
Adoptable storage in CM 14.1 is not working properly. I have a 16GB microSD card and a 16GB internal storage, both having 14GB usable storage. When I make my SD card as internal, it formats the card successfully. Problem is that Settings app reports wrong storage information. Instead of having a total of 28GB of usable storage (14GB + 14GB), it only displays a total of 14GB and it says that I have used "-9 GB out of that 14GB" (yeah negative) which is impossible. I couldn't move apps and data to and from SD or internal storage. I understand that this is an Alpha build so maybe devs could fix this along the way.
Overall, this is too good for an Alpha build. Cheers!
EDIT: This issue has been fixed on the latest build (20161129). Thanks Sir Arvin!
Official builds are up.
IMPORTANT: Please note that the latest official TWRP for seed is not yet updated to handle CM's updater app. If users want to update to latest nightly, they need to download the zip and flash normally using TWRP. CM updater app is not recommended until the patched official TWRP is released.
Love your rom! Are you going to continue maintain it under lineage name?
Andromax A
This is for 32bit?? Can i port for msm8909?
My device is Smartfren Andromax A16c3H
Krisna16c3h said:
This is for 32bit?? Can i port for msm8909?
My device is Smartfren Andromax A16c3H
Click to expand...
Click to collapse
No you can't port this
Sent from my YU4711 using XDA Labs
Myrtana said:
Love your rom! Are you going to continue maintain it under lineage name?
Click to expand...
Click to collapse
look here: https://download.lineageos.org/seed
arvinquilao said:
Official builds are up.
IMPORTANT: Please note that the latest official TWRP for seed is not yet updated to handle CM's updater app. If users want to update to latest nightly, they need to download the zip and flash normally using TWRP. CM updater app is not recommended until the patched official TWRP is released.
Click to expand...
Click to collapse
The problem of not seeing sim card contacts continues and there is also no root for apps that only exist for adb

[ROM] [9/6/2017][6.0.1] FlymeOS 6.7.5.19R

Flyme OS 6.7.5.19R
9/6/17 l7ssha.pl​
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOAD ROM
SUBMIT LOGCAT/REPORT BUG
Credits: (also on my website)
Flyme Team: https://github.com/FlymeOS/flyme-release
@danielpinto8zz6: https://github.com/danielpinto8zz6/android_device_xiaomi_hermes
@nofearnohappy: https://github.com/nofearnohappy/Custom_kernel_hermes_new
XDA:DevDB Information
FlymeOS, ROM for the Redmi Note 2
Contributors
l7ssha, l7ssha.pl
Source Code: https://github.com/FlymeOS/flyme-release
ROM OS Version: 6.0.x Marshmallow
FlymeOS Version: 6.7.5.19R
ROM Kernel: Linux 3.10.x
Based On: FlymeOS
Version Information
Status: Beta
Current Beta Version: v1.1
Beta Release Date: 2017-06-09
Created 2017-06-11
Last Updated 2017-06-11
Thank for our work ,,
What is the difference between here and that rom
https://forum.xda-developers.com/re...m-flyme-5-1-12-16r-beta-xiaomi-redmi-t3528279
How to recovery mode on this ROM? Please I need to know
alfonsander said:
How to recovery mode on this ROM? Please I need to know
Click to expand...
Click to collapse
Power off. Then press volume down and power button.
Anymore info???
ahmedvip2008 said:
What is the difference between here and that rom
https://forum.xda-developers.com/re...m-flyme-5-1-12-16r-beta-xiaomi-redmi-t3528279
Click to expand...
Click to collapse
this one is very buggy..my advice, dont install it..use the other one, its better and more stable..i ve tested also this one..its the same but OP changed a few things and it doesnt work.
guys i have flashed flyme v6.7.7.31R-beta by ry09iu. the rom is really great but i could turn on mobile data(that option is disabled). I'm using jio 4g sim but in the apn settings the is no apn configured and while trying to add apn,i get this error message "connectivity setting unfortunately stopped and it closes". is that a bug ? or can be fixed?.If it is not a bug ,please explain how to fix that issue.Thanks in advance...
I tried to flash the latest build of ry09iu to my redmi note 2 but is bootlooping, why?
Please fix can not use data if two sim card inserted
Dear sir,.
I already use your rom for some days, i find that data (internet)can not be enabled if i insert two sim card.
Please fix this big bug sir. ?
Need your attention.
l7ssha said:
Flyme
OS 6.7.5.19R
9/6/17 l7ssha.pl​
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOAD ROM
SUBMIT LOGCAT/REPORT BUG
Credits: (also on my website)
Flyme Team: https://github.com/FlymeOS/flyme-release
@danielpinto8zz6: https://github.com/danielpinto8zz6/android_device_xiaomi_hermes
@nofearnohappy: https://github.com/nofearnohappy/Custom_kernel_hermes_new
XDA:DevDB Information
FlymeOS, ROM for the Redmi Note 2
Contributors
l7ssha, l7ssha.pl
Source Code: https://github.com/FlymeOS/flyme-release
ROM OS Version: 6.0.x Marshmallow
FlymeOS Version: 6.7.5.19R
ROM Kernel: Linux 3.10.x
Based On: FlymeOS
Version Information
Status: Beta
Current Beta Version: v1.1
Beta Release Date: 2017-06-09
Created 2017-06-11
Last Updated 2017-06-11
Click to expand...
Click to collapse
Deleted
Good
rusli7705 said:
Dear sir,.
I already use your rom for some days, i find that data (internet)can not be enabled if i insert two sim card.
Please fix this big bug sir.
Need your attention.
Click to expand...
Click to collapse
I have a way to help you (maybe it will work) but I can not send the link because I'm a new user ((,, write me a message and I'll post in a private message
Can't use data with 2 sim.
is this ROM multilanguage or just EN,CN
Hello, with this ROME my rn2 freez

[ROM][UNOFFICIAL] LineageOS 16.0 for Nexus 5

LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0 (Pie), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known bugs:
Tell me
Download:
Last unofficial: Here
As 07/19 u have to resize, check Here
Telegram Group: Here
XDA:DevDB Information
hammerhead-los16, ROM for the Google Nexus 5
Contributors
EnesSastim, aleasto, jprimero15, razorloves, sb6596
Source Code: github.com/nexus5oof
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Beta
Created 2019-04-13
Last Updated 2019-07-19
Nice, thank you very much! I will test it tonight and report back...
Hey @EnesSastim, are you sure the arm64 is the right addonsu for nexus 5 ?
I'll try addonsu-16.0-arm-signed.zip from https://download.lineageos.org/extras, lets see
Cheers
Blade
Report:
1) Installs fine in dual-boot setup using efidroid and TWRP 3.2.3.0
2) clear cache after install!! (otherwise forceclosing apps)
3) boot and setup is fine.
addonsu16arm->bootloops
Awesome!
Keep up the good work
Oof
BIade said:
addonsu16arm->bootloops
Click to expand...
Click to collapse
Dont even bother with that, i didnt even know i added it to the thread lol, use Magisk 19.0
EnesSastim said:
Dont even bother with that, i didnt even know i added it to the thread lol, use Magisk 19.0
Click to expand...
Click to collapse
yup thats the plan ^^
Some Screenshots
Btw i created a group on Telegram, link: https://t.me/nexus5chat
Better late than never. Trying it out now. Thanks @EnesSastim!
@EnesSastim! finaly ! Thank you for this surprise.
We are grateful.
Dirty flashed over 15.1 and everything seems OK. Teşekkürler Enes ?
Hi. Can i dirty flash from android 7.1.2 ? It has been so long didnt play with the rom

			
				
Thank you for the Rom.
Anyone can tell How is Battery life and Performance of this Rom and known Bugs ?
i can't flash gapps, how can i do it?
? happy flashing Hammy.
error 1 when installing gapps
does it support f2fs?
also, those icons from the notification drawers are green
how to change them to blue?
thx for your great work!
Enes hi, AOSP , LineageOs, Evolution X... Which one to choose dude? It says official on AOSP but on website of AOSP I couldn't find official link for hammy... I will try one of your builds asap, thanks for your great effort... ( Bu arada Türk sün galiba, ayrıca gurur duydum dostum [emoji1250][emoji1250][emoji1250] )
Nexus 5 cihazımdan Tapatalk kullanılarak gönderildi
I have a problem with gapps, error 70, not enough storage, but i use pico package and i unistalled a lot of apps of my system and is impossible to install gapps.

Categories

Resources