Hello! This is the original logo of nougat android for the Moto G4 / G4 plus, created and edited by me I hope it is of its utility (First version)
bootlogo V1:
https://drive.google.com/file/d/0B7JDFUG5qbldOGtQa3hZWDVWSnM/view?usp=drivesdk
Thanks For All!!! Good Day
Does it remove the unlocked bootloader message
Sent from my Moto G (4) using Tapatalk
Rahulsingh190 said:
Does it remove the unlocked bootloader message
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
Yes, friend that error is solved, but still persists the "N/A" I am working on removing it and correcting some bugs
KevinSYB said:
Yes, friend that error is solved, but still persists the "N/A" I am working on removing it and correcting some bugs
Click to expand...
Click to collapse
How can you do it cause the "N/A" is a bootloader overlay which can't be fixed the only way you can do it is by having it white where the "N/A" appears on your bootlogo
prajwal2001 said:
How can you do it cause the "N/A" is a bootloader overlay which can't be fixed the only way you can do it is by having it white where the "N/A" appears on your bootlogo
Click to expand...
Click to collapse
Yes, I'm looking for a way to overlap the original bootlog image to cover that message, possibly a solution, but it's only a matter of time. When you have solved it or found some form so that it is not noticeable it will certainly be here.:laugh::laugh:
Thanks, works fine in moto g4 normal, still persist the "N/A" or the "bad key", but it's much better than the warning message
The only solution!
prajwal2001 said:
How can you do it cause the "N/A" is a bootloader overlay which can't be fixed the only way you can do it is by having it white where the "N/A" appears on your bootlogo
Click to expand...
Click to collapse
Even I had the same problem but then I matched the boot logo with the screen resolution and voila! The N/A is gone and got replaced by the boot logo I wanted!
Related
You can remove the unlocked bootloader message as well as make some good stuff with a new logo.
Prerequisites :
Unlocked Bootloader
Adb and Fastboot
Some Faith
Steps(ADB/Fastboot Method)
Download the required attachement and unzip it
Copy the logo.bin found inside to the adb root folder
Open terminal in the folder
Enter fastboot mode in phone and plugin the device
Enter fastboot flash logo logo.bin in terminal
Enter fastboot reboot
UPDATED:
V1.Initial Release
Attachement 1
Simple logo with powered by android on it.
Attachement 2
Logo with powered by cyanogenmod on it.
V2. Changelog:
N/A REMOVED
If you have any new ideas to be put in logo. Please tell me....
There's no attachment on the post
Sent from my Moto G (4) using Tapatalk
Fixed...
I tried both both in twrp an got error 6
Sent from my Moto G (4) using XDA-Developers mobile app
Deleted
hazmatkid said:
I tried both both in twrp an got error 6
Sent from my Moto G (4) using XDA-Developers mobile app
Click to expand...
Click to collapse
some fix is to be done on script. meanwhile use adb method. I ve updated the thread.
Thanks for making the custom logos and this thread in particular.
But I'm pretty convinced that changing the logo on xt1644 doesn't do anything other than leave the "N/A" text on a black screen.
Actually nevermind, I was trying to flash the .zip not the .bin like in previous places I've read to do this
How did you made this?
I've tried it before with the same method, but that didn't work!.
This is....
Just want to make my own screens.
The adb method worked great! Thank you. That screen bothered the hell out of me for some reason.
Thanks so much for doing this! One thing I noticed is that there is still the n/a visible when I boot the phone. Is this just me?
ax.xu said:
Thanks so much for doing this! One thing I noticed is that there is still the n/a visible when I boot the phone. Is this just me?
Click to expand...
Click to collapse
Not just you, I can still see it as well.
Anyone got the logo with the warning? I know it may sound weird... but N/A overlaid on the logo bothers me even more than the warning did. Didn't think it would of course, so my bad
Thread updated. N/A Removed.
could you provide us more custom logos? or tutorial of making it?
Could you make it with a black background, eyes burn at night
Thanks for this. But, is there also a way to eliminate the 5 seconds wait during boot due to unlocked bootloader?
I tried this. But still NA is not going. Is there any other alternative??
askreddy2 said:
I tried this. But still NA is not going. Is there any other alternative??
Click to expand...
Click to collapse
try v2
@rahulsnair
You only move the "Moto" a little to the top, didn't you? ^^
So the NA is still there but no longer visible.
Bender1987 said:
@rahulsnair
You only move the "Moto" a little to the top, didn't you? ^^
So the NA is still there but no longer visible.
Click to expand...
Click to collapse
yep. for now.
attached logo.bin file i midified to replace the unlocked bootloader warning
as the boot process looks for id which we do not have so it shows "n/a"
that i just covered in white arrow
motologo link:
https://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
Nice!
Thanks, NICE, what is the format, size of the image ?
png file
1440X2560 24bit
reiteravi said:
png file
1440X2560 24bit
Click to expand...
Click to collapse
nice, could you maybe make one with a dark picture? i found some in other threads but they don't work unfortunately
Sent from my MOTO Z (XT1650-03) with Tapatalk
problem is the "n/a" us in white so u will see it if the picture us dark
so u need a white area to mask it
if i could find a way to disable this field
any picture would do
any way i will try to make a dark on sans that area
there u r
looks like this
reiteravi said:
there u r
Click to expand...
Click to collapse
thanks, works great
Sent from my MOTO Z (XT1650-03) with Tapatalk
Sorry to insist, I tried to rename the image as png, open with 7zip, all fail, how you created the image, Photshop also report unknown format
used MotoLogo.v1.1
i'm not able to find motologo anywhere. could you please provide us a link?
http://forum.xda-developers.com/showpost.php?p=69532317&postcount=250
thought i posted here as well
shortly from this thread:
http://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
reiteravi said:
attached logo.bin file i midified to replace the unlocked bootloader warning
as the boot process looks for id which we do not have so it shows "n/a"
that i just covered in white arrow
Click to expand...
Click to collapse
Than for the logo. It works fine and the stock black warning screen was really ugly!
Only one thing... I like a lot the arrow solution BUT.... may I ask for a better Z?
It's too left positioned in my opinion and really a not so nice font used for it... what do you think about a solution with a Z partially superimposed on Moto logo on the right bottom of it?
This way even the arrow would be more "integrated" in my opinion (and both will disappear in seconds during boot)! :fingers-crossed:
Let me know your opinion on this...
it's easy:
use winlogo and edit orange.png in the projects\logo\modified\images folder
then flash it
reiteravi said:
it's easy:
use winlogo and edit orange.png in the projects\logo\modified\images folder
then flash it
Click to expand...
Click to collapse
:fingers-crossed:
And winlogo can be found...?
Any risk to brick?
http://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
as posted 3 messages above yours....
risk ? just as any fastboot.
reiteravi said:
http://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
as posted 3 messages above yours....
risk ? just as any fastboot.
Click to expand...
Click to collapse
Yes, I'm asking because with boot animation sometimes we can have booting issues if it isn't ok... and I'm worried of this since it goes before all booting and I don't want to brick the phone for a... Z!
than just save logo.bin from stock so u can always go back
reiteravi said:
than just save logo.bin from stock so u can always go back
Click to expand...
Click to collapse
I'm not sure this is enough... Logo.bin is used even before entering fastload mode if I don't go wrong...
Hello,
Since I've always received good advice and help here I'd like to give something back.
I've made a boot logo file for myself which doesn't show the warning that the device is unlocked AND I even hid the annoying "N/A".
It will first show my custom black & white Motorola logo instead of the warning and will then boot normally with the red & blue boot animation.
To apply one of the logos extract them somewhere, boot into the bootloader and execute
Code:
fastboot flash logo logo.bin
Don't flash it from a recovery or FlashFire etc.
Chris
P.S.: I also included the original logo file in case you change you mind.
Nice!
Perfect .....
Thanks
All you did was make the background white to hide the message, which flashallthetime did a while back. Is there any way to find out where the white N/A text is read from so we can remove it that way?
If you don't mind a white bootlogo, this works great.
xxBrun0xx said:
All you did was make the background white to hide the message, which flashallthetime did a while back. Is there any way to find out where the white N/A text is read from so we can remove it that way?
If you don't mind a white bootlogo, this works great.
Click to expand...
Click to collapse
You cannot get rid of the N/A unless you are able to rewrite the bootloader while keeping it signed. As soon as you tamper with it the device won't boot. Nobody was able to do this for the newer Motorola devices.
xxBrun0xx said:
All you did was make the background white to hide the message, which flashallthetime did a while back. Is there any way to find out where the white N/A text is read from so we can remove it that way?
If you don't mind a white bootlogo, this works great.
Click to expand...
Click to collapse
You are right, but not entirely. I also had to make the logo a little larger or else the N/A would've been exactly on the circle.
But yeah, it wasn't much work that I did. I just wanted to share something I created, to give the community something back, so that I don't only leech information from it.
Chris
KurrKurr said:
You are right, but not entirely. I also had to make the logo a little larger or else the N/A would've been exactly on the circle.
But yeah, it wasn't much work that I did. I just wanted to share something I created, to give the community something back, so that I don't only leech information from it.
Chris
Click to expand...
Click to collapse
Thanks again ...What you have done is great ... Serves the purpose....That's all we need ..
Is it ?:good:
the original bootlogo nougat contains N/A?
Thank you! Works as intended! No N / A Warning anymore.
KurrKurr said:
Hello,
Since I've always received good advice and help here I'd like to give something back.
I've made a boot logo file for myself which doesn't show the warning that the device is unlocked AND I even hid the annoying "N/A".
It will first show my custom black & white Motorola logo instead of the warning and will then boot normally with the red & blue boot animation.
To apply one of the logos extract them somewhere, boot into the bootloader and execute
Code:
fastboot flash logo logo.bin
Don't flash it from a recovery or FlashFire etc.
Chris
P.S.: I also included the original logo file in case you change you mind.
Click to expand...
Click to collapse
hello you could do with the original color of the zplay bike very thanks
regards
Works
100%!
Hi,
I created a patched version of the logo.bin for remove the "unlock message".
I use the tool "Moto Boot Logo Maker" and the original logo.bin from stock.
You can download from here:
http://www.sendspace.com/file/im0jk9
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
As regular, you can flash from bootloader mode using:
Code:
fastboot.exe flash logo logo-g5-fix.bin
If you like to apply from TWRP (fastboot not needed) then download this ZIP:
http://drive.google.com/file/d/0B4BcNVrbrBOzZko3VjhmRWtrVms/view?usp=drivesdk
(made by user atrac17)
I created this version as I feel the one around here is a G4 logo.bin. This uses the original logo.bin from G5.
Can you upload this on another site? Sendspace is blocked in India :/
You can get it from my Google Drive here:
https://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
OP, feel free to add it to the post
This is a great idea but it doesn't get rid of the N/A overlay... See my post here.
atrac17 said:
This is a great idea but it doesn't get rid of the N/A overlay... See my post here.
Click to expand...
Click to collapse
Not possible to fix. This overlay is printed by the bootloader that can't be rewrited. We only can replace the background image.
manos78 said:
Not possible to fix. This overlay is printed by the bootloader that can't be rewrited. We only can replace the background image.
Click to expand...
Click to collapse
Yep, I know that it can't be changed. It's at the bottom of the link I posted. I was saying it's a good idea, if you can deal with the NA overlay then the boot logo's fine. I made a flashable zip for TWRP here if you want to link it to the OP.
atrac17 said:
I made a flashable zip for TWRP here if you want to link it to the OP.
Click to expand...
Click to collapse
Done! :highfive:
Thanks. I took that and changed the logo with one the same size using the tool, saved it as flashable zip and get error 6. Error flashbooting bin too. Any idea what I'm doing wrong? [note: image is not my work]
Edit: Got it working by editing the original logo.bin
manos78 said:
Not possible to fix. This overlay is printed by the bootloader that can't be rewrited. We only can replace the background image.
Click to expand...
Click to collapse
What do you mean not possible? I got rid of it
Thank you both for the zip file and fastboot method. The boot logo looks fine with the N/A still there. It's barely noticeable. Now if I can find the Moto boot animation to match I'll be set.
I found a YouTube video of a guy from India doing it. He used the same logo, but it was a white background so you don't see the NA
zeft64 said:
What do you mean not possible? I got rid of it
Click to expand...
Click to collapse
How you rid of it, do you have the file?
ferxx17 said:
How you rid of it, do you have the file?
Click to expand...
Click to collapse
I think I do hold on I'll look for it
Here are a couple with no N/A (white letters hide it).
zeft64 said:
I think I do hold on I'll look for it
Click to expand...
Click to collapse
You removed the NA overlay from the bootloader? Please provide your method.
Awesome :good:
atrac17 said:
You removed the NA overlay from the bootloader? Please provide your method.
Click to expand...
Click to collapse
Hi,
He is doing a very simple workaround: as the overlay is printed with white letters, the logo image has blank pixels in the zone where the bootloader prints the message. Then, the print out has no effect.
manos78 said:
Hi,
He is doing a very simple workaround: as the overlay is printed with white letters, the logo image has blank pixels in the zone where the bootloader prints the message. Then, the print out has no effect.
Click to expand...
Click to collapse
Okay, so he's not removing the overlay from the bootloader. Might be a language barrier because it's misleading.
Thanks for you work, any chance of a stock logo.bin with a dark background?
JohnSmith8786 said:
Thanks for you work, any chance of a stock logo.bin with a dark background?
Click to expand...
Click to collapse
Is this what you wanted? The N/A will show on this.
Remove "Unlocked Bootloader" warning
Will this method work for Razer Phone?
This is from Moto Z2 Force thread, since both the phones have similar boot A/B system partition it should work I guess.
https://forum.xda-developers.com/z2-force/development/remove-bootloader-unlocked-warning-t3702353
silvercat said:
Remove "Unlocked Bootloader" warning
Will this method work for Razer Phone?
This is from Moto Z2 Force thread, since both the phones have similar boot A/B system partition it should work I guess.
https://forum.xda-developers.com/z2-force/development/remove-bootloader-unlocked-warning-t3702353
Click to expand...
Click to collapse
I remember something similar to this back when I had a Motorola photon or whatever it was called. It worked because it was just a picture in the operating system on Motorola. On my Axon 7 it didn't work because the waning screen wasn't a picture on that phone. Is the warning screen just a .PNG file on the Razer Phone?
tabletalker7 said:
I remember something similar to this back when I had a Motorola photon or whatever it was called. It worked because it was just a picture in the operating system on Motorola. On my Axon 7 it didn't work because the waning screen wasn't a picture on that phone. Is the warning screen just a .PNG file on the Razer Phone?
Click to expand...
Click to collapse
I'm not sure abt that, how can I find out? I saw a splash.img file which I think is the initial boot image. I tried replacing that manually with stock image but dint work.