Related
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Click to expand...
Click to collapse
You ARE the ONLY one, who IS responsible for your device health. NObody in this thread (especially author) is NOT responsible! Live long and prosper
Important:
I cannot help you with ROM problem if:
you cannot formulate, what is wrong
you've made some modifications in ROM or Kernel
you do not know, how to follow instructions
I would be very grateful for help with debugging and searching for errors and non-working features
Also I would be grateful for advices about how can be solved some problems
Instructions
First install of ROM with New Storage Layout:
BACKUP ALL DATA
if it wasn't done already:
Unlock your device via http://www.htcdev.com if you haven't done so already
Read the post by @Thömy about how to migrate to the New Storage Layout
Factory Reset / Wipe data
Copy CM-12.1.zip to SD card (optionally copy gapps to SD card)
Boot into recovery
Flash CM-12.1.zip
Optionally flash gapps
Reboot to bootloader
Flash boot.img from CM-12.1.zip via fastboot
Reboot
Wait for "Optimizing apps" (it can take up to 30 minutes in some cases, so, please, be patient)
Use CM
Updating from CM 12 or 12.1 with New Storage Layout:
BACKUP ALL DATA
Copy CM-12.1.zip to SD card (optionally copy new gapps to SD card)
Boot into recovery
Flash CM-12.1.zip
Optionally flash new gapps
Reboot to bootloader
Flash boot.img from CM-12.1.zip via fastboot
Reboot
Wait for "Optimizing apps" (it can take up to 30 minutes in some cases, so, please, be patient)
Use CM
Coming from another ROM with New Storage Layout:
BACKUP ALL DATA
Factory Reset / Wipe data
Copy CM-12.1.zip to SD card (optionally copy gapps to SD card)
Boot into recovery
Flash CM-12.1.zip
Optionally flash gapps
Reboot to bootloader
Flash boot.img from CM-12.1.zip via fastboot
Reboot
Wait for "Optimizing apps" (it can take up to 30 minutes in some cases, so, please, be patient)
Use CM
Downloads
2015-04-29(28) (mirror)
2016-07-21 (mirror)
ChangeLog
2015-04-29(28)
First test build from CM GitHub
2016-07-21
One more first test build from CM GitHub
Known Issues
Stock camera issues
Battery drains
Unexpected dissapearing of Mobile Data or WiFi
Volume changes during playback when returning to home screen
FAQ
Is there any problem when dirty update from CM 12/12.1?
I haven't found any problem
When will be a release of newer version?
Nobody knows that
XDA:DevDB Information
CyanogenMod 12.1, ROM for the HTC One X
Contributors
VaskivskyiYe
Source Code: https://github.com/CyanogenMod/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Testing
Created 2015-05-04
Last Updated 2016-07-21
Reserved
Reserved
5.1.1?
Thank you.
Thank you bro.
Sent from my Galaxy Nexus using XDA Free mobile app
downloading ....
@VaskivskyiYe
Wow!
Welcome to XDA-Developers community! Very grateful for your contribution.
Expected Thömy to release this after his exams.
Are you expecting to maintain CM 12.1 builds?
Rowlf said:
@VaskivskyiYe
Wow!
Welcome to XDA-Developers community! Very grateful for your contribution.
Expected Thömy to release this after his exams.
Are you expecting to maintain CM 12.1 builds?
Click to expand...
Click to collapse
Thanks (
Yes, I'll continue support of this builds. Unfortunately, I'm not such a pro, as Thömy, and I'm not sure, I can deal with all the bugs and problems in builds. But I can try (
Hi, I want to try this, first I was wondering if there are more bugs/more unstable than latest cm12. Thanks!
Can someone upload telephony-commons.jar from this rom in system/frameworks?
I accidentaly rewrote it with wrong one.
scottjay said:
Hi, I want to try this, first I was wondering if there are more bugs/more unstable than latest cm12. Thanks!
Click to expand...
Click to collapse
This build is as (un)stable as 12.0 builds. But you have to keep in mind, theoretically it can consist issues, that weren't already found and they could be critical
GrizCro said:
Can someone upload telephony-commons.jar from this rom in system/frameworks?
I accidentaly rewrote it with wrong one.
Click to expand...
Click to collapse
system/framework/telephony-common.jar
Mirror please.
o1100101 said:
Mirror please.
Click to expand...
Click to collapse
Yeah... I vote for basketbuild or androidfilehost.
o1100101 said:
Mirror please.
Click to expand...
Click to collapse
Regnas said:
Yeah... I vote for basketbuild or androidfilehost.
Click to expand...
Click to collapse
AndroidFileHost mirror added to Download section
So far everything seems stable, except network. It breaks completely randomly and reboot is required to reconnect.
VaskivskyiYe said:
AndroidFileHost mirror added to Download section
Click to expand...
Click to collapse
Great.
Thank you.
Thank you for this awesome ROM
@VaskivskyiYe
Have you changed anything in the device sources (so post a link to your git pls) or only downloaded from CM and ran the build?
crusader727 said:
@VaskivskyiYe
Have you changed anything in the device sources (so post a link to your git pls) or only downloaded from CM and ran the build?
Click to expand...
Click to collapse
@crusader727
This first build was just taken from CM sources. Now I am trying to fix important functions (like mobile data and WiFi crashes). After I'll succeed in dealing with any problem of ROM and post new build, I'll also add git source to the thread
VaskivskyiYe said:
@crusader727
This first build was just taken from CM sources. Now I am trying to fix important functions (like mobile data and WiFi crashes). After I'll succeed in dealing with any problem of ROM and post new build, I'll also add git source to the thread
Click to expand...
Click to collapse
Thanks for the hard work, it already seems more responsive than CM12. I've noticed that swipe typing now works, but swipe to wake no longer seems to work. Or I just aren't looking hard enough.
Any update on the device crashing when you enter the multitasking in landscape?
Hi all,
Seems there is a CM14.1 nightly now available for find7s on the official CM site, link here: hxxps://download.cyanogenmod.org/?type=nightly&device=find7s
Was just wondering if anyones given it a go yet, and if so knows whether or not it supports LVM and how stable the rom is?
Haven't found any info that states one way or the other, hoping someone knows.
Thanks in advance.
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Its a little bit weird that there is not available yet on the page https://www.cmxlog.com/14.1/
Hope it will appear here soon as well as it is already here:
(Find 7a) https://download.cyanogenmod.org/?device=find7
and
(Find 7) https://download.cyanogenmod.org/?device=find7s
Dirty flashed cm-14.1-20161205-NIGHTLY over cm-14.1-20161201-UNOFFICIAL via menu CyanogenMod updates. Everything seems to be OK. One remark: boot time when update is completed is quite long, so be patient. Of course in order to not see "SD corrupted" it is necessary to flash cm-13.0-find7-unified-storage-patch.zip
EDIT: Just for your information: boot animation CM face is gone. Now there is word "android" in plain white.
great news
Finally there we are changes logs:
https://www.cmxlog.com/14.1/find7/
https://www.cmxlog.com/14.1/find7s/
Android 7.1.1 in the next nightly
CyanogenMod will never support LVM.
This is 7.1 right? Or is it 7.0? I downloaded the 7.1 GAPPS, which should be correct for this build...
I updated it, and it runs smooth without any force crashes and nonsense. (Besides the time I tried to open an app not built for nougat, =P. If you're hesistant about updating, don't think, just do it.
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
Yup u can do that. After flashing cm14.1 official, u might wanted to flash cm13 patch by wuxianlin, then flash the gapps and lastly wipe the cache and dalvik
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
And yes you need to flash Wuxianlin's patch after every upgrade just for aesthetic purpose, that is to fix the SDcard damage info bug, unless CM find7 maintainer will fix that, and when it happen you will no longer need to flash the Wuxianlin's CM13 patch.
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
rafal.polska.b said:
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Click to expand...
Click to collapse
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
DELETE
Thanks everyone for the info, might hold off as I have LVM, here's hoping that namelessrom put out an official nougat rom in the not too distant future.
New Display is not supported
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
New Display is not supported. Colors, ghosting, and bleeding will still be running wild just like all older CM.
The only Custom ROM on the planet that fully supports new display is OmniROM and it seems that they could use some help. Please support their effort: omnirom.org
javier.pc said:
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
Click to expand...
Click to collapse
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Yashraj Chawla said:
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Click to expand...
Click to collapse
It is. But omnirom support substratum theme.
StormTrooper89 said:
It is. But omnirom support substratum theme.
Click to expand...
Click to collapse
I think you can install substratum theme in CM14.1 (but only substratum themes that support Android 7.1.1), since there no theme engine inside CM14.1
Hello,
I am currently running a nighly build of Lineage OS 14.1 on my LG G2.
I was wondering:
- when a new 14.1 nighly comes out: Do I have to flash the Gapps and root zip also after (dirty) flashing the new nightly?
- and what in case of a 14.2 build or even a 15 build? Do I have to do a clean install in that case?
Thank you in advance!
Don't know about 14.2 or 15 because they are still no where.
But for new 14.1 no need to flash g apps and root zip again.
FrankFrank456 said:
Hello,
I am currently running a nighly build of Lineage OS 14.1 on my LG G2.
I was wondering:
- when a new 14.1 nighly comes out: Do I have to flash the Gapps and root zip also after (dirty) flashing the new nightly?
- and what in case of a 14.2 build or even a 15 build? Do I have to do a clean install in that case?
Thank you in advance!
Click to expand...
Click to collapse
It doesn't hurt to flash an updated GApps package along with the Nightly update.
If you have SuperSU, then you should flash it again along with the Nightly update. This is because updating the Nightly also affects the SuperSU modifications and binaries. Re-flashing the SuperSU will reinstate the SuperSU modifications and binary installation.
If you don't re-flash SuperSU, then you'll get a notification from the SuperSU app that the binaries need to be installed.
So the GApps is up to you and the SuperSU is a yes.
I wish you the best of luck!
Peace and Love!
Peace and Love!
~Ringo Starr~
Sent on my Communicator [SCH-I535] from the Bridge of the U.S.S. Enterprise...
********************************************
**IF I WAS HELPFUL IN ANY WAY THEN**
**PLZ THANK ME WITH A THUMBS UP!**
********************************************
FrankFrank456 said:
Hello,
I am currently running a nighly build of Lineage OS 14.1 on my LG G2.
I was wondering:
- when a new 14.1 nighly comes out: Do I have to flash the Gapps and root zip also after (dirty) flashing the new nightly?
- and what in case of a 14.2 build or even a 15 build? Do I have to do a clean install in that case?
Thank you in advance!
Click to expand...
Click to collapse
To add on to what @Ibuprophen said...
Historically speaking, dirty flashes are usually fine within the same major version number, while clean flashes are often required when the major version number changes.
The ROM maintainer will provide instructions for any exception to this general rule.
Thank you for your replies!
Is 14.1 --> 14.2 a major version number jhedfors? I mean: when there is 14.2, can I flash it dirty?
I flashed my phone yesterday, and I got a lot of errors. After flashing Gapps and the root-zip from Lineage, it was all solved. So in my case I have to flash them all again everty time.
FrankFrank456 said:
Thank you for your replies!
Is 14.1 --> 14.2 a major version number jhedfors? I mean: when there is 14.2, can I flash it dirty?
I flashed my phone yesterday, and I got a lot of errors. After flashing Gapps and the root-zip from Lineage, it was all solved. So in my case I have to flash them all again everty time.
Click to expand...
Click to collapse
Current versioning is as follows: Major.Minor.Patch
That would be considered a minor change. But as I mentioned, it all depends on the advice from the maintainer.
You should not need to flash either Gapps or official Lineage superuser after nightly update. You might want to post logs of you have any issues next nightly update.
jhedfors said:
Current versioning is as follows: Major.Minor.Patch
That would be considered a minor change. But as I mentioned, it all depends on the advice from the maintainer.
You should not need to flash either Gapps or official Lineage superuser after nightly update. You might want to post logs of you have any issues next nightly update.
Click to expand...
Click to collapse
Ok I will, thanks!
This is not my build. Credit ny-hardcore for all the hard work on this. I'm just posting it.
Screen call is broken.
This is Lineage 18, Android 11 custom rom for the Pixel 4a Sunfish
If you do not want root, you can stop after step 6
1. Reboot to bootloader
2. fastboot flash --slot all boot recovery.img https://drive.google.com/file/d/1Hh7D_UbnnoTRr1XbC9i0-dvtFgbuFqrP/view?usp=sharing
3. Reboot to recovery
4. factory reset
5. adb sideload lineage-18.0-20201209-UNOFFICIAL-sunfish.zip
https://mega.nz/file/cUlVXApI#NbzUJ6UlyQvyPTitKnW7uJG_tHrsfYor9O0dH4yIiWc
6. Reboot to system
7. Install Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/canary/app-debug.apk
8. Reboot to bootloader
9. fastboot flash boot magisk_patched.img https://drive.google.com/file/d/1cONN9Ev0jdAHaRSeOeYyeRTONJ-yO_8-/view?usp=sharing
10. Reboot to system
Could you please provide a kernel and device source tree for this? I have an in-progress diff which I am working to get 18 running fully on the device. It doesn't boot yet, and I would like to know what I messed up.
liamwhite said:
Could you please provide a kernel and device source tree for this? I have an in-progress diff which I am working to get 18 running fully on the device. It doesn't boot yet, and I would like to know what I messed up.
Click to expand...
Click to collapse
Based on the fact that this is NOT my work as stated above, I'm NOT at liberty to tell you. No offense. I would contact xda member edmontonchef and ask him. He's the one who sent it to me. I would like to think this wouldn't be a issue because if it was mine, I wouldn't care, but it's not.
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
ny-hardcore said:
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
Click to expand...
Click to collapse
I'm using it right now. Great Rom. Thank you!!! Hope you don't mind I shared it.
Does this support signature spoofing?
Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
Would doubt it, if it's just vanilla LOS
ny-hardcore said:
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
Click to expand...
Click to collapse
Are Gapps included. Looking for a non gapps rom
EggZenBeanz said:
Are Gapps included. Looking for a non gapps rom
Click to expand...
Click to collapse
No gapps. Minimal Google play service function are included in build.
Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
No
TheSayaMan said:
No gapps. Minimal Google play service function are included in build.
Click to expand...
Click to collapse
Actually it contains gapps/Google play.
ny-hardcore said:
Actually it contains gapps/Google play.
Click to expand...
Click to collapse
I guess I assumed wrong. I thought he was referring to having to flash a seperate gapps zip.
Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
i'm working on a microg edition using the notes from the guy who made the microG build for 4a 5G
ny-hardcore said:
i'm working on a microg edition using the notes from the guy who made the microG build for 4a 5G
Click to expand...
Click to collapse
Oh yeah! Would love to see that. I'm ready to hop from my pixel 3xl once there's a non gapps ROM available
New build updated in OP. Thank Senior Member ny-hardcore for this.
Changes: Lineage sources and kernel updated with latest google update. The boot.img was updated in the payload to eliminate a second boot flash after sideloading rom for working WiFi. Please report any bugs that I may have missed. Also, I never dirty flash over anything. They more than likely cause problems. I did a clean install of this. If you are on the previous build of this, I DO NOT recommend dirty flashing it.
TheSayaMan said:
New build updated in OP. Thank Senior Member ny-hardcore for this.
Changes: Lineage sources and kernel updated with latest google update. The boot.img was updated in the payload to eliminate a second boot flash after sideloading rom for working WiFi. Please report any bugs that I may have missed. Also, I never dirty flash over anything. They more than likely cause problems. I did a clean install of this. If you are on the previous build of this, I DO NOT recommend dirty flashing it.
Click to expand...
Click to collapse
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Edmontonchef said:
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Click to expand...
Click to collapse
I haven't been able to check everything out. One thing I just noticed is that I am unable to pass safetynet with it but not a big deal for me.
Edmontonchef said:
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Click to expand...
Click to collapse
The boot in OP will work as well so take your pick and yes I did notice its still November. He's working on another build though.
TheSayaMan said:
The boot in OP will work as well so take your pick and yes I did notice its still November. He's working on another build though.
Click to expand...
Click to collapse
december hasnt been merged in lineage sources
Is the boot.img a twrp recovery or? I am coming from stock, so would i need to touch twrp at all for this?
Please note: I no longer maintain this ROM as my phone screen has cracked and I've moved on to a different device. Bgncm will probably continue to maintain it for mi8 as its similar to his other devices. Thanks for those that supported in the past and perhaps we will meet again in the future on a different device.
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: https://github.com/LineageOS/android_device_xiaomi_dipper
Kernel source code: https://github.com/LineageOS/android_kernel_xiaomi_sdm845
Compatibility:
Compatible with Xiaomi Mi 8
Builds are based off the Xiaomi's Android 10 firmware.
Recommended firmware is latest MIUI stable firmware.
LineageOS Downloads
download.lineageos.org
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery
Format /system, /data and /cache
Install MIUI firmware
Install LineageOS zip package
Install a Google Apps package of your choice.
Important notes:
* Required * firmware version must be based on MIUI *-based builds.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
All LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
@infrag
Thanks for keeping up the support for this device!
Excellent work!
Even though I would have preferred a version without Gapps (either Vanilla or microG).
Amazing news! Thank you
Nice, I was waiting for LOS 19
Thanks!
I'm now in lineageos 18.1 and can flash this directly, or first flash miui and then flash this
minax007 said:
@infrag
Thanks for keeping up the support for this device!
Excellent work!
Even though I would have preferred a version without Gapps (either Vanilla or microG).
Click to expand...
Click to collapse
No gapps build now in OP.
zhangzy said:
I'm now in lineageos 18.1 and can flash this directly, or first flash miui and then flash this
Click to expand...
Click to collapse
Upgrades from lineage-18.1 have not been tested by myself yet. If you want to upgrade I'd suggest wait till official builds roll out.
Can i flash this without format data? cz dipper is my daily driver and it's gonna take a long time for doing backup
running good, battery life is so-so
there is no google feed. Bug or there is something to activate?
cazkiller said:
Can i flash this without format data? cz dipper is my daily driver and it's gonna take a long time for doing backup
Click to expand...
Click to collapse
I'd wait a bit longer before flashing a daily driver with this...
infrag said:
I'd wait a bit longer before flashing a daily driver with this...
Click to expand...
Click to collapse
it's done, booting LOS19 without format data and everything is work. OTA support on this rom sir?
Thanks!
I'm use 18.1 and waiting for OFFICIAL LineageOS 19.0 Upgrade.
Without Gapps Included.
Hi! Sorry to ask if it is a stupid question, does this make the phone rooted? thanks
Barabba11 said:
Hi! Sorry to ask if it is a stupid question, does this make the phone rooted? thanks
Click to expand...
Click to collapse
not by default
running good
Thanks
couplefly said:
Thanks!
I'm use 18.1 and waiting for OFFICIAL LineageOS 19.0 Upgrade.
Without Gapps Included.
Click to expand...
Click to collapse
Official builds wont include gapps.
I only included them in the first un-official builds as I cant find a flashable gapps build thats reliable at the moment to recommend.
infrag said:
Official builds wont include gapps.
I only included them in the first un-official builds as I cant find a flashable gapps build thats reliable at the moment to recommend.
Click to expand...
Click to collapse
Yes, i am waiting for Official builds NOT include gapps.
I like LineageOS because it doesn't include gapps.
Naked is beautiful.
couplefly said:
Yes, i am waiting for Official builds NOT include gapps.
I like LineageOS because it doesn't include gapps.
Naked is beautiful.
Click to expand...
Click to collapse
Yup it is, but majority of us install gapps for all day to day needs, having both options will always be great
couplefly said:
Yes, i am waiting for Official builds NOT include gapps.
I like LineageOS because it doesn't include gapps.
Naked is beautiful.
Click to expand...
Click to collapse
Just look above and you will see that @infrag has also uploaded a version without GApps.
mattcri said:
not by default
Click to expand...
Click to collapse
how can I activate root? Is it easy to do? thanks