Ok so I have rooted cheap $10 phones that I don't care about, but not my G3. I have the t-mobile LG G3 and would like to know what the best mod is for performance since it is getting a bit slow. I want 7.0 since it is new and fresh. I want to know how safe this is and how easy and most importantly the instructions. Thanks in advance for your help.
i have the international variant, D855, i'm using resurrection remix, i believe it's the stablest one that gathers as many tweaks as possible.
fenonce said:
Ok so I have rooted cheap $10 phones that I don't care about, but not my G3. I have the t-mobile LG G3 and would like to know what the best mod is for performance since it is getting a bit slow. I want 7.0 since it is new and fresh. I want to know how safe this is and how easy and most importantly the instructions. Thanks in advance for your help.
Click to expand...
Click to collapse
Teamoctos is best to use flash 35b
Sent from my LG-VS985 using Tapatalk
djevil said:
Teamoctos is best to use flash 35b
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
I have no idea what any of that means. Could you please explain as I need actual instructions since I have never done this
fenonce said:
I have no idea what any of that means. Could you please explain as I need actual instructions since I have never done this
Click to expand...
Click to collapse
https://www.teamoctos.com/oct-n-builds/
Opengapps.org get 7.1.1 pico gapps arm
Download 35b bootstack make sure u rooted and get the latest twrp
Flashing notes:
1.do a clean installation do factory reset then advance wipe dalvik cache,cache,data,system then swap.
2. Install 35b bootstack first then flash ROM,Gapps,35b again then Mr.bump then restart.
If u need a zip file for all of this let me know I will upload it asap
Sent from my LG-VS985 using Tapatalk
Ghassane said:
i have the international variant, D855, i'm using resurrection remix, i believe it's the stablest one that gathers as many tweaks as possible.
Click to expand...
Click to collapse
I have no idea what any of that means. Could you please explain as I need actual instructions since I have never done this
fenonce said:
I have no idea what any of that means. Could you please explain as I need actual instructions since I have never done this
Click to expand...
Click to collapse
Are u rooted just start there
Sent from my LG-VS985 using Tapatalk
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
fenonce said:
I have no idea what any of that means. Could you please explain as I need actual instructions since I have never done this
Click to expand...
Click to collapse
If u got hangouts or Kik let me know any type messenger I will gladly help u out
Sent from my LG-VS985 using Tapatalk
djevil said:
Are u rooted just start there
Sent from my LG-VS985 using Tapatalk
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
If u got hangouts or Kik let me know any type messenger I will gladly help u out
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Do you have discord? I think that would be the best option.
fenonce said:
Do you have discord? I think that would be the best option.
Click to expand...
Click to collapse
Send me the link for that app
Sent from my LG-VS985 using Tapatalk
djevil said:
Send me the link for that app
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
https://discord.gg/7Hq44
fenonce said:
https://discord.gg/7Hq44
Click to expand...
Click to collapse
Add me rootmaster354
Sent from my LG-VS985 using Tapatalk
djevil said:
Add me rootmaster354
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Did you join the server? If not look at the bottom right corner and send me the 4 digits
fenonce said:
Did you join the server? If not look at the bottom right corner and send me the 4 digits
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I made the server
Sent from my LG-VS985 using Tapatalk
fenonce said:
Did you join the server? If not look at the bottom right corner and send me the 4 digits
Click to expand...
Click to collapse
#4250
Sent from my LG-VS985 using Tapatalk
Procedure
fenonce said:
I have no idea what any of that means. Could you please explain as I need actual instructions since I have never done this
Click to expand...
Click to collapse
first, you have to root your device, there are many variants (d855, d851, d850 ...), check what's yours, and look for how to root it in here or YouTube for clearer tutorials, you'll have to install TWRP recovery too, for this you'll need Autorec, check this thread: https://forum.xda-developers.com/lg-g3/general/apk-flash-twrp-autorec-thanks-to-t3081396 , pay attention to what android version you're using, download the appropriate version for your android (5.1 LP, 6.0 MM).
now head to resurrection remix download page: https://sourceforge.net/projects/resurrectionremix/files/?source=navbar , look for your device and download the rom, next, you'll need the google apps zip, head to Opengapps (just google it and click the first link, their website), choose these parameters : "ARM", "7.1", "Pico", and hit download.
move the two .zip files (the rom and the gapps) to your external memory card, and reboot your phone to recovery:
1- turn off your phone.
2- press volume down and power simultaneously till you see the phone booting (LG logo), release the two buttons for one second or two, and press them again till you see a factory reset page, just press yes as it'll take you to the recovery, assuming you've already installed the TWRP recovery, if it's not installed, pressing yes will RESET YOUR PHONE)
in the recovery, select wipe (and wipe (cache, data, BE CAREFUL NOT TO WIPE INTERNAL STORAGE, as it's your phone's storage and you may lose your photos ...etc. unless you backed them up and you know what you're doing).
after you finish the wiping process, head to install, and select the zips in your external memory card, and flash them (select the zip, hit install, confirm by swiping from left to right), the same procedure applies to google apps file. after that reboot your phone and let it settle, it may take up to five min at first boot. once you see the welcome page, you're done.
I’m sorry for replying so late, I was busy these last two weeks, but I’ve noticed that XDA’s dear members have already took care of you, anyway, I’m still here if you need any further explanations.
Ghassane said:
first, you have to root your device, there are many variants (d855, d851, d850 ...), check what's yours, and look for how to root it in here or YouTube for clearer tutorials, you'll have to install TWRP recovery too, for this you'll need Autorec, check this thread: https://forum.xda-developers.com/lg-g3/general/apk-flash-twrp-autorec-thanks-to-t3081396 , pay attention to what android version you're using, download the appropriate version for your android (5.1 LP, 6.0 MM).
now head to resurrection remix download page: https://sourceforge.net/projects/resurrectionremix/files/?source=navbar , look for your device and download the rom, next, you'll need the google apps zip, head to Opengapps (just google it and click the first link, their website), choose these parameters : "ARM", "7.1", "Pico", and hit download.
move the two .zip files (the rom and the gapps) to your external memory card, and reboot your phone to recovery:
1- turn off your phone.
2- press volume down and power simultaneously till you see the phone booting (LG logo), release the two buttons for one second or two, and press them again till you see a factory reset page, just press yes as it'll take you to the recovery, assuming you've already installed the TWRP recovery, if it's not installed, pressing yes will RESET YOUR PHONE)
in the recovery, select wipe (and wipe (cache, data, BE CAREFUL NOT TO WIPE INTERNAL STORAGE, as it's your phone's storage and you may lose your photos ...etc. unless you backed them up and you know what you're doing).
after you finish the wiping process, head to install, and select the zips in your external memory card, and flash them (select the zip, hit install, confirm by swiping from left to right), the same procedure applies to google apps file. after that reboot your phone and let it settle, it may take up to five min at first boot. once you see the welcome page, you're done.
I’m sorry for replying so late, I was busy these last two weeks, but I’ve noticed that XDA’s dear members have already took care of you, anyway, I’m still here if you need any further explanations.
Click to expand...
Click to collapse
Dude I got it rooted already and installed OctOS. This guide is really good though and thanks. I got the Gapps and I got the rom and that stuff. I had a question though. I was not told to move my stuff to an SD card and I didn't and I just flashed it in TWRP recovery. Second of all I wanted ask I also was told to flash MR_Bump after flashing the ROM and Gapps which allowed the device to boot. IDK if that is normal. I have D851. Lastly, is my device still rooted? Or do I need to install something and how easy is it to switch roms, since idk if oct os is my thing since it has weird icons and the camera only does 1080p
fenonce said:
Dude I got it rooted already and installed OctOS. This guide is really good though and thanks. I got the Gapps and I got the rom and that stuff. I had a question though. I was not told to move my stuff to an SD card and I didn't and I just flashed it in TWRP recovery. Second of all I wanted ask I also was told to flash MR_Bump after flashing the ROM and Gapps which allowed the device to boot. IDK if that is normal. I have D851. Lastly, is my device still rooted? Or do I need to install something and how easy is it to switch roms, since idk if oct os is my thing since it has weird icons and the camera only does 1080p
Click to expand...
Click to collapse
I’ve never been told about that MR_bump, i don't know if it's something special to the D851 variant, or it depends on the rom you're using, but anyway, I’ve never used it to make my phone boot, when encountering a bootloop, either I reflash the same rom, if the problem persists, I flash my backup (or any other OS since the problem is the rom I was trying to flash) or I, simply, go back to stock via LGFlashtool.
switching between roms is as easy it seems, you download the rom.zip, the gapps (if needed), you go to the recovery, flash them both, and reboot, that's all. Sometimes you'll have to flash the modem/radio files before flashing a new rom, this problem usually occurs when you switch from stock to aosp (android open source project) roms.
and you should know that the root depends on the rom too, for example, using a stock based rom (Fulmics ...) would require flashing an additional zip to get root privileges, unlike aosp based roms, like cynaogenMod, "lineage", or resurrection remix which I’m currently using, they usually use an implemented root app, it's accessible in "developer options".
I’m not a camera guy though, even if the camera in this phone doesn't deserve a bad software, I admit that LG stock roms offer the best rendering when it comes to taking shots/shooting videos, but they suck at heavy tasks and multitasking, and they usually cause the phone to heat up, besides, I kind of like the aosp interface (like nexus devices), that's why I gave up on camera, after all, it isn't that bad on resurrection remix, so no big deal.
Ghassane said:
I’ve never been told about that MR_bump, i don't know if it's something special to the D851 variant, or it depends on the rom you're using, but anyway, I’ve never used it to make my phone boot, when encountering a bootloop, either I reflash the same rom, if the problem persists, I flash my backup (or any other OS since the problem is the rom I was trying to flash) or I, simply, go back to stock via LGFlashtool.
switching between roms is as easy it seems, you download the rom.zip, the gapps (if needed), you go to the recovery, flash them both, and reboot, that's all. Sometimes you'll have to flash the modem/radio files before flashing a new rom, this problem usually occurs when you switch from stock to aosp (android open source project) roms.
and you should know that the root depends on the rom too, for example, using a stock based rom (Fulmics ...) would require flashing an additional zip to get root privileges, unlike aosp based roms, like cynaogenMod, "lineage", or resurrection remix which I’m currently using, they usually use an implemented root app, it's accessible in "developer options".
I’m not a camera guy though, even if the camera in this phone doesn't deserve a bad software, I admit that LG stock roms offer the best rendering when it comes to taking shots/shooting videos, but they suck at heavy tasks and multitasking, and they usually cause the phone to heat up, besides, I kind of like the aosp interface (like nexus devices), that's why I gave up on camera, after all, it isn't that bad on resurrection remix, so no big deal.
Click to expand...
Click to collapse
Ok I might try RR soon and I think for me I just would install it and I have gapps. Do I have to put them on the sd card? Why do people do that? Also, I found an app called opencamera that is pretty good, but idk the G3 is the best camera I have
fenonce said:
Ok I might try RR soon and I think for me I just would install it and I have gapps. Do I have to put them on the sd card? Why do people do that? Also, I found an app called opencamera that is pretty good, but idk the G3 is the best camera I have
Click to expand...
Click to collapse
people usually put them in the sd card to wipe everything (internal storage, data, cache) and start fresh.
i tried open camera, wasn't pleases by the results, so i'm just using the stock camera that comes with the RR rom.
Related
Please note, this is not compatible with the JB OTA - use the app in the Play store instead for now. Thanks!
Howdy all! So, it's time for me to dig out my release thread template... you know what that means?
The LG Optimus G is now unlocked.
Both the AT&T Version and the Sprint Version have been successfully unlocked with this method.
(To answer your question, if you're wondering, we're going to work on the Canadian version next, then the Korean version)
First off, I'd like to write a few words to LG:
Dear LG, a product will rise and fall on the shoulders of it's community.
If you lock a device, and shut out your community, you lose the backing of a very vocal group of people. When you lose the backing of your community, they no longer recommend your product, and you lose money. HTC has discovered this recently.
Please support your development community, we understand product security plays a role here, but ensure that you cater to your community still.
The second you try to fight your development community by locking them out of your products is the second that I will cease to recommend your products.
Keep this in mind, and I assure you that you will find yourself on the top of the game.
With all of that said, let's get back to the goodies.
What is this?!
This is Project FreeGee, silly!
Have an Optimus G ? This project will allow you to unlock your bootloader, and install whatever you want.
Click to expand...
Click to collapse
How does this work?
For the moment, that is a trade secret. Suffice it to say that we put some ones and zeros in the right places, and good things happen.
This is also my opportunity to say do not allow any OTAs to install without asking if they are compatible. LG could possibly patch this in such a manner that makes it rather hard to ever exploit it again.
Click to expand...
Click to collapse
I'm a skeptic. I demand proof!
Alrighty, here it is:
Once again, taken with my HTC Vivid, that would rather mute me than let me speak.
Damn "nose elimination"! I am not noise, and I will not be silenced! (mmhmhmhpmhmp!!)
Click to expand...
Click to collapse
Okay, I'm game. Where do I get it?
Version 0.3 has a confirmed bug-- camera app crashes phone after a few seconds!
If you have 0.3 installed, simply download this, extract the .zip, and extract the .tar file. Inside the freegee-working directory, you'll find boot-att-freegee.img .
Boot your phone to fastboot, then fastboot flash boot /path/to/boot-att-freegee.img
I will release a quick fix .zip for flashing in CWM tomorrow.
Current Version: 0.5
Changelog:
New in v0.5 Removed LG Security check. You are now free to remove any and all apps.
http://downloads.codefi.re/thecubed/lgoptimusg/sprint/freegee/FreeGee-0.5_Sprint.zip
Currently, the download is Windows-only. I will make a OSX/Linux/Windows version soon!
Click to expand...
Click to collapse
FAQ
Can I flash an OTA after installing this?
No. Flashing an OTA could contain a new bootloader, and it would replace the one we have put on your device. If you flash the new OTA, and it replaces the bootloader but not the boot.img, you could be left in a situation where you could not boot the phone due to a security error. Once you're in that position, the only thing you can do is LGNPST back to stock-- and even then, it is possible that an OTA could enable an anti-rollback feature which would disable LGNPST.
Does this mean I can flash custom ROMs now?
Yes. However, the custom ROM must be made for your device. We're working on a decrapified stock ROM, and AOSP ROMs as well. Be patient for those to come.
Can I install a Nexus 4 system image and boot.img and have it work?
We've tested that, and the answer is no, not yet. Some work needs to be done, but once we figure it out, we'll have a quick and easy AOSP ROM.
Does this mean that we can use the Nexus 4 sources (kernel and android) ?
Short answer: Yes.
This phone is essentially a Nexus 4, with minor differences in GPIOs, memory address space, and partition table layouts.
Kernel source is iffy, since we've got Eco mode and a few other things that actually make me like the Optimus kernel more than the Nexus kernel.
However, this discussion is best suited for a new post.
How can I uninstall this?
I'm working on an easy-uninstall for this as well. Stay tuned for the links...
Click to expand...
Click to collapse
Important Information
To enter bootloader, hold volume UP and power.
Upon entering the bootloader, you will notice that there is no 'menu' to enter fastboot or recovery. Unfortunately, since the stars didn't align properly, we were unable to tell the new bootloader where to load the images that contain the menu from.
In light of that, you'll have to navigate the menu blind. Use the volume keys to change selection, and the power key to select.
The choices are (in order of pressing volume down):
Start - boot the phone normally [already selected]
Restart Bootloader - reboot into the bootloader
Recovery Mode - enter recovery (CWM)
Power Off - powers the phone off
So, to get to Recovery, you would press volume down twice then power.
If you have trouble with this, watch my video below for a demonstration.
Click to expand...
Click to collapse
Instructions!
Please note: this requires root before you can install this! If you haven't rooted your phone yet, now is the time to do so.
Also, ensure that you have ADB drivers installed. This WILL NOT WORK without them.
Before we begin: please make sure you have USB Debugging turned on, your phone is in "Charge Only" mode, and your phone's screen is on and unlocked.
This will allow you to see the root access prompt if your phone asks for it.
Download the .zip from this post
Extract it somewhere on your hard drive
Ensure your screen is on and unlocked
Run the "freegee.bat" script, and follow the instructions.
Do not run this as administrator! the install will fail if you do so.
Once the unlock is complete, check to make sure you have a "backups" folder now in the folder where you put FreeGee. If not, DO NOT REBOOT your phone.
Even a failed unlock will still show the 'congratulations you're unlocked!' text, read the output to see if you have errors!
You should not see any "adb.exe not found" errors, or "tar: invalid magic" errors. Those would be errors in the script.
An error which you can ignore is "No space left on device" after it says erasing old recovery and boot. That's just a side effect of how we clear the old images out.
Click to expand...
Click to collapse
Contact Information
"Mister Cubed, how do I talk to you?"
That's easy! Hop on IRC and join me on Freenode in #lg-optimus-g . I'm in there as IOMonster (or IOMonster_desk, or IOMonster_work, depending on where I am)
There's also a lot of other cool people in there too!
When you hop in IRC, if you've got a question, just ask it. Don't say "halp! i does brick'd my phone, and i dunno wat to does?!!", but rather "can anyone help? my phone is stuck in fastboot mode, and I can't get out of it. I flashed <xyz> and now I'm stuck here."
Asking your full question (even though it might be a long message) helps us figure out the best way to assist you, without us having to lead the conversation and ask all the questions for you.
Also, on IRC (for those of you who have never used IRC) if you say someone's name, it will 'ping' (also called 'highlight') them. This tells us that someone is talking to us. So, if you pop in IRC and say "IOMonster, it worked!", I'll get a notification, and will probably say "that's awesome!" in response.
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the assistance of the following people:
Shelnutt2
g33k3r
kmdm
synergy
jcase
sextape
xboxfanj
...and the support of the entire #lg-optimus-g IRC channel
A project like this is really only a sum of it's parts, and in our case, we're over 9,000!
Please make sure to tell someone on this list that they're awesome if you see them on IRC or (*gasp!*) in real life.
Click to expand...
Click to collapse
All right, that about sums up my post. Did I forget anything? Let me know below...
Thanks to all of u guys for all your hard work!
Here is some proof, this is fully working...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for the blurry images, took these from my old OG Evo... But can say its fully unlocked!!!
Nice work thecubed, and shellnut2 on this, thanks for keeping our freedom alive!!!
Does the sprint launch OTA prevent this from working?
Sent from my LG-LS970 using xda app-developers app
Tyederian said:
Does the sprint launch OTA prevent this from working?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I've already run the OTA, and had no issues unlocking, or rooting after the OTA...
I am so excited! I cannot wait to get this thing unlocked! :victory:
Sweet super excited
Awesome! Will be donating to the team on pay day thanks guys!
Sent from my PG86100 using xda premium
That's awesome. Just got the phone today from Best Buy for $55 and excited to get the bootloader unlocked and wait for the AOSP Jelly Bean roms.
Thanks devs!!!
Wow! Many thanks to all the devs for their hard work and to the beta testers for their willingness to let their phones be guinea pigs. Very much looking forward to this!
Sent from my LG-LS970 using Tapatalk 2
jblazea50 said:
That's awesome. Just got the phone today from Best Buy for $55 and excited to get the bootloader unlocked and wait for the AOSP Jelly Bean roms.
Thanks devs!!!
Click to expand...
Click to collapse
$55 they charged me $99 and some tax on top of it. how did you pull that off?
Super sweet you guys are awesome!!
Christmas came early this year.
Sent from my LG-LS970 using xda app-developers app
New build is up!
Fixed a typo in my code haha
awesome job, big thanks to everyone.
And I second that $55 question.
jblazea50 said:
That's awesome. Just got the phone today from Best Buy for $55 and excited to get the bootloader unlocked and wait for the AOSP Jelly Bean roms.
Thanks devs!!!
Click to expand...
Click to collapse
How on earth did you get it for $55?
tabormeister said:
How on earth did you get it for $55?
Click to expand...
Click to collapse
Had signed up for phone freedom to get $50 gift card back in February.
So I just ran this and had a couple little panic moment!!
1. While reading the script, SU poped up and I missed the "Grant SU" button on the phone. I still got the backup folder but nothing was in it. I then thought it worked, rebooted, and nothing.
The second time I ran this, I got to the "Grant SU" button in time and all went GREAT!!! This time I had files in the backup folder.
2. When I rebooted into recovery, I tried to make a backup. I hit the backup button and got some message that said "Can't mount backup path". So i tried the backup to internal SD and it worked.
Figured I'd write this in case anybody else had the same moment's I did.
The files on the backup folder are very differnt from what I'm used to so hopefully I did it correctly. I noticed there was an option in CWM to choose the backup format after I'd made my backup, so I'm not sure which format is correct for Restore. I guess I used the default which is .dup.
Thank you very much dev's for this!!!!!:laugh:
---------- Post added at 05:54 AM ---------- Previous post was at 05:25 AM ----------
DO NOT use the camera!!!! It'll crash your phone!!!
I read about it in the ATT section just now, but it's too late for me. So I guess we have this bug also.
OK...so not quite a crash. Held the volume down button and power together and got it to reboot.
Now we just need to have a way to recover our phones if/and/or when we do crash our phones. I know the devs are working on this, as obviously they are the bomb!!!
Tease: Two things brewing that hopefully will be up today. Both directly related to this
Shelnutt2 said:
Tease: Two things brewing that hopefully will be up today. Both directly related to this
Click to expand...
Click to collapse
I'm sure hoping you're referring to my post above. I get alittle wiggy if I don't have a way to fix my phone myself.
This is only what has worked for me i take no responsibility for anyones phone catching fire after following my guide/advice. Tested myself on a UK D802 16GB on Three Network! Confirmed working on 32GB devices now too!!
This needs formatting to make it easier to read. I will get around to it but here is the basic info needed!
Please READ this entire first post before asking questions that are already answered.
Today i have managed to flash the European Open Kitkat rom and root it and keep TWRP recovery. It worked for me but can't guarantee the same results for you.
Prerequisites. (Skip this if you already have rooted JB rom with custom recovery)
First i downgraded to Jellybean using this guide. I downgraded to "UK Open 16GB D80210B_00.kdz" i'm not sure if that's required though.
Then I rooted it using IORoot.
Then i installed TWRP using Freegee from the Play Store.
From here you are ready to flash or you can start from here if you already have root and recovery on Jellybean.
You need these three files.
1. My modded Stock rom zip.
Mirror 1 | Mirror 2
2. Savoca Modded Boot.img.
3. SuperSU ZIP.
Now to flash! (Take out your simcard first.)
1. Boot into TWRP and flash the modded stock rom DOWNLOAD 1. It will take a while and the screen may turn off during this, just press power button. Ignore the failed error!
2. Now go to main TWRP screen and select Reboot Recovery. (Wouldn't mount system otherwise!)
3. Now go to Mount and make sure System is ticked. (Not sure if required but do it anyway!)
4. Now flash Savoca's modified boot.img DOWNLOAD 2.
5. Again go to Mount and make sure System is selected.
6. Now flash SuperSU ZIP DOWNLOAD 3.
7. Now i wiped data here not sure if it's required as the rom wipes system but do it anyway!
8. Replace sim and reboot and all should be well!
If you have NO MOBILE NETWORK i got this error and that's why i recommended removing sim card. I had to repeatedly toggle wifi on and off, and airplane mode and restarted a few times. Not sure what fixed it but don't panic it DOES work.
Bugs and Fixes!
Audio Hissing/Crackling on Headphones.
This is present on all Kitkat roms currently. Some users don't get it most do. Type of headphones seems to be a factor. The following fix is temporary and will revert after a reboot. So needs to be repeated if your phones reboots for any reason.
Type in phone dial pad 3845#*802# and it will show Hidden Service Menu.
Click on "ELT Test", select "Manual Mode" and select "Test Start".
With headphones plugged in select "Audio Loopback" and than select "Test Start".
Blow gently into the microphone and keep on this test 20 seconds or more.
Once done back out and play music. Enjoy!
No LTE/4G anymore?
It seems to require a change of bands for some to get LTE working. There is a value to edit in build.prop. You can do this manually with a root explorer and setting correct permissions after changing, I've found the easiest way is to download JRummy Build.prop editor from market.
Open the Build Prop Editor app.
Find the value "ro.telephony.default_network" and select it.
Notice the property value will be set to "9". Change this to "11" and let the app reboot phone.
If you still don't have LTE try again but change the value to "13" and let the app reboot phone.
Bluetooth Battery Drain
This is NOT real battery drain so please don't worry about it. It is a falsely reported statistic. I get battery life on a par with 4.2.2. Around 8 hours screen on time which is fantastic! If you have battery drain please try a full wipe, don't restore apps from another rom do it manually. Take a look at your apps.
How is it done?!
The modded zip is stripped down to include only the System, Modem and Cust partitions. These are all that is required for Kitkat to play nice with Savocas modified boot.img. I edited the updater-script to remove the entries for all partitions except those listed above and repacked it up nicely to flash. So it is possible to do this with any future updates too. The Cust partition is necessary in case your partition has old carrier stuff still on there, this flashes a clean Cust partition.
Thanks to:
LenAsh for the flashable zip i modded.
Savoca for the modded Boot.img and modules.
Chainfire for SuperSU.
Jesus for blessing all the little children.
it would be great if you also make one for the 32gb version
anyways, great work, dude!
I'm flashing it right now and looking up your address at the same time in case it won't work ;]
How long should it take to boot ?
superbonto said:
it would be great if you also make one for the 32gb version
anyways, great work, dude!
Click to expand...
Click to collapse
As i've said it seems like there isn't a difference between md5's of 32gb and 16gb versions of Kitkat i just wouldn't want to say test it... But in theory it should work just fine.
paniczklos said:
I'm flashing it right now and looking up your address at the same time in case it won't work ;]
How long should it take to boot ?
Click to expand...
Click to collapse
Let me know how it goes...you know just to give me a running start I assume you're 16GB user? It doesn't take long to boot but if it loops make sure you have wiped data in recovery. It is safe to do factory reset in standard recovery too as i tried it when trying to get my network back on!
ephumuris said:
As i've said it seems like there isn't a difference between md5's of 32gb and 16gb versions of Kitkat i just wouldn't want to say test it... But in theory it should work just fine.
Let me know how it goes...you know just to give me a running start I assume you're 16GB user? It doesn't take long to boot but if it loops make sure you have wiped data in recovery. It is safe to do factory reset in standard recovery too as i tried it when trying to get my network back on!
Click to expand...
Click to collapse
I'm preparing a dead fish to throw it on your doormat ;p
I'm on 12th minute of booting - LG logo and led flashing green-to-blue.
And yes I'm 16GB
How to use the standard recovery ?
Is it repeatedly making the boot sound? Hold power button and volume down until LG logo flashes up, then release power button and press again whilst keeping hold of volume. You should get a white screen. Just press power twice i think that should reset it.
I'm pretty sure it didn't take me 12 minutes to boot
Can you please tell us how to mod the original EUR kdz? I can't download 2 gigabytes now and I already have the kdz file. Is there any guide?
Thanks ephumuris
Hey TC i have a lg g2 16gb that i bought from amazon. I am also on the three network in the uk. I do not get 4g option on my phone. Sorry for OT but i havent met anyone else on here using three and g2. Any help would be appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D802 using Tapatalk
SPBoss said:
Hey TC i have a lg g2 16gb that i bought from amazon. I am also on the three network in the uk. I do not get 4g option on my phone. Sorry for OT but i havent met anyone else on here using three and g2. Any help would be appreciated. View attachment 2630159
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
What rom are you running? I get the option for gsm/wcdma/lte auto. Although no 4g for me on Three in Hull yet.
badchip said:
Can you please tell us how to mod the original EUR kdz? I can't download 2 gigabytes now and I already have the kdz file. Is there any guide?
Thanks ephumuris
Click to expand...
Click to collapse
I'm guessing there is some sort of tool to extract the KDZ files and then all you need out of that is system.img and modem.bin and cust.bin... Easy to make an update script or i can upload one for you. I've never needed to extract a KDZ though...
ephumuris said:
Is it repeatedly making the boot sound? Hold power button and volume down until LG logo flashes up, then release power button and press again whilst keeping hold of volume. You should get a white screen. Just press power twice i think that should reset it.
I'm pretty sure it didn't take me 12 minutes to boot
Click to expand...
Click to collapse
Doing that boots the TWRP. i've wiped the data like a satan, in every possible way. There's no boot loop - it's just booting and booting and booting. I think I'll have to go back to stock and repeat. Or is there any way to upload files to the phone through recovery (I remeber there was this option in clokcwork recovery ) ?
paniczklos said:
Doing that boots the TWRP. i've wiped the data like a satan, in every possible way. There's no boot loop - it's just booting and booting and booting. I think I'll have to go back to stock and repeat. Or is there any way to upload files to the phone through recovery (I remeber there was this option in clokcwork recovery ) ?
Click to expand...
Click to collapse
I'm not sure if there is an option in TWRP i've certainly not seen it. I find it strange that you are getting stuck at boot screen... Maybe it matter which JB rom you come from?
My original one was 80210B Euro open rom.
"UK Open 16GB D80210B_00.kdz"
ephumuris said:
I'm not sure if there is an option in TWRP i've certainly not seen it. I find it strange that you are getting stuck at boot screen... Maybe it matter which JB rom you come from?
My original one was 80210B Euro open rom.
"UK Open 16GB D80210B_00.kdz"
Click to expand...
Click to collapse
D80210A_00.kdz - it's EUR open + OTA update to E version.
I'm trying do sideload the files through ADB ;/
ephumuris said:
I'm guessing there is some sort of tool to extract the KDZ files and then all you need out of that is system.img and modem.bin and cust.bin... Easy to make an update script or i can upload one for you. I've never needed to extract a KDZ though...
Click to expand...
Click to collapse
Thanks, I found this guide but it doesn't mention the download from Savoca. Should I just follow it (and use the KKROM_template.zip)? Or what do you recommend? I really can't to flash KK with root on my device
paniczklos said:
D80210A_00.kdz - it's EUR open + OTA update to E version.
I'm trying do sideload the files through ADB ;/
Click to expand...
Click to collapse
The starting rom is the only thing i can think of that could make a difference if you followed instructions exactly all the factors are the same besides that!
It would help if anyone else has downloaded it and flashed successfully or unsuccessfully to let us know!
badchip said:
Thanks, I found this guide but it doesn't mention the download from Savoca. Should I just follow it (and use the KKROM_template.zip)? Or what do you recommend? I really can't to flash KK with root on my device
Click to expand...
Click to collapse
That guide will give you a rooted Kitkat rom but no custom recovery. Which is a risky position to be in
Although the tool would be useful in that thread it would allow you to get the system.img, modem.bin and cust.bin you need. I could then provide a blank update zip with just the correct updater-script for you?
ephumuris said:
The starting rom is the only thing i can think of that could make a difference if you followed instructions exactly all the factors are the same besides that!
It would help if anyone else has downloaded it and flashed successfully or unsuccessfully to let us know!
Click to expand...
Click to collapse
I'm downloading the UK open EUR and I'll start over.
ephumuris said:
That guide will give you a rooted Kitkat rom but no custom recovery. Which is a risky position to be in
Although the tool would be useful in that thread it would allow you to get the system.img, modem.bin and cust.bin you need. I could then provide a blank update zip with just the correct updater-script for you?
Click to expand...
Click to collapse
I would very much appreciate that. I have used the tool to extract the kdz and dz. I have the files in screenshot now.
Whats the proper next step?
Thanks for your help
edit: The meta-inf folder is from the KK template provided in that thread, I suppose I don't need that.
Hi!
Firstly thanks for this!
and secondly i have to say that i already flashed to my LG G2 32gb and works like a charm... btw i also did it with another way:
1-Downgrade to 4.2.2.
2-when your in v.4.2.2 root and recovery.
3-i used lastest CWM version from Philz.
4-FLash your Rom.zip
5-reboot to recovery. (Dunno if this is really necessary but just in case i did it too)
6-Flash Savoca Patched
7-Flash Root
8-Reboot
9-ENjoy EUR 20b =)
Thanks!
Great to confirm working on 32gb too. Badchip you might have to wait til later unless you can use that existing meta inf folder. I've just left for work so not at laptop.
Try deleting every file but only keep.
Meta inf folder.
System.IMG
Modem.bin
Custom.bin
Zip those up and flash them. Should work if the update script is right in meta inf folder.
@iall5tar What base jellybean rom did you downgrade to?
And regarding custom recovery it should work with any cwm philz or twrp. I just referenced twrp as that's what I use.
Sent from my LG-D802 using Tapatalk
What you mean about folder meta-inf? im not a expert i just want to give a try and it worked xD
Here is the stock 14.5.A.0.270 (5.0.2) customized AU odexed, pre-rooted, highly debloated and bundled up with PRFCreator
BEFORE and AFTER:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZIP ARCHIVE INCLUDES:
a) the rom itself (removed bunch of crapware)
b) SuperSU-2.49-BETA
c) Nuts Dual Recovery 2.8.15
d) DRM Function Restoration for UB
STEPS:
1) backup
2) wipe /system, /cache, /dalvik-cache
3) flash the main rom
4) flash google services removal.zip (optional)
5) boot up phone and go through setup
6) flash further debloat (optional)
DOWNLOADS:
Main
Google Services Removal
Further Debloat
Maybe a noob question: Flashing your ROM means I will have my DRM functions restored?
Papanik said:
Maybe a noob question: Flashing your ROM means I will have my DRM functions restored?
Click to expand...
Click to collapse
I'm interested in this as well. Does flashing your rom restore BIONZ processing, making all the steps in the linked thread un-necesarry?
Also, anyway to check if BIONZ is working or not?
Papanik said:
Maybe a noob question: Flashing your ROM means I will have my DRM functions restored?
Click to expand...
Click to collapse
zgomot said:
I'm interested in this as well. Does flashing your rom restore BIONZ processing, making all the steps in the linked thread un-necesarry?
Also, anyway to check if BIONZ is working or not?
Click to expand...
Click to collapse
I'm currently on a locked bootloader so I can't verify if it'll work without having to flash an ftf with TA beforehand. Best thing to do is try it yourself.
If x-reality is working, bionz is working.
I flashed this ROM and my Z1 does not boot at all. When i press the power button, it vibrates once and that's all.
I flashed a stock rom, re-installed recovery and created a pre-rooted zip based on the SG customized firmware. The result was the same. Black screen, no sign of activity.
Does anyone have any idea what could be wrong here?
My device is a C6903 and worked just fine with the pre-rooted .242
Thanks!
facing problems...
After i do google and further debloat... dun even have app store to install my apps. I also unable to add my google account at Settings > Accounts...
Its great to have a RAM free rom... but what the point of having so much ram when there's nothing else u can do with the phone. I did try installing Google Play Store apk but it just simply crashes...
Please dun be offended as I still feel this ROM is a well done rom, I might just missed out something.
kedirakevo said:
After i do google and further debloat... dun even have app store to install my apps. I also unable to add my google account at Settings > Accounts...
Click to expand...
Click to collapse
The google debloat is only optional. If you don't flash it, you'll get to keep the play store.
I personally don't use the play store and download my apps from apkmirror or evozi
Okay, can share more what does further debloat do? I can do that without google debloat right?
kedirakevo said:
Okay, can share more what does further debloat do?
Click to expand...
Click to collapse
Further debloat removes some of the bloat that I forgot to remove from the main rom itself and also the setup wizards. So make sure to use it only after booting your device and going through the setup.
I can do that without google debloat right?
Click to expand...
Click to collapse
Yes.
I've tried flashing this twice and have ended up softbricking twice. I think the issue may be because of the wiping of system, which I have honestly never had to do before, so I'll try once again, and if it doesn't work I guess I'll just find something else.
EDIT: Yep, nothing I do seems to really be working, probably just getting bad downloads on my end though.
compatible with c6902?
Is this compatible with xperia z1 ,c6902?
Zerousen said:
I've tried flashing this twice and have ended up softbricking twice.
Click to expand...
Click to collapse
Do you have a c6903 and on latest kitkat(.108) or .242?
ravishmahur said:
Is this compatible with xperia z1 ,c6902?
Click to expand...
Click to collapse
Nope.
How to flash Xposed in this rom please? Thanks
Ahki767 said:
Here is the stock 14.5.A.0.270 (5.0.2) customized AU odexed, pre-rooted, highly debloated and bundled up with PRFCreator
edited
Click to expand...
Click to collapse
Flashed without issues coming from CM12.1 (the terrible, terrible photo-quality and some in-call sound issues recently always make me return to stock). I just took care to follow instructions and flash a pre-rooted .2.4.2 rom prior to flashing this.
The rom feels really really smooth, it's lovely so far.
edit: One issue thus far is some incompatibility on the Play Store, for instance Galaxy On Fire - Alliances. I can download it on any rom (CM/stock) except this one. Anyway to fix this?
edit2: Are dpi values changed for the launcher? I've tried a couple of xposed modules but I can't seem to get rid of that empty edge. The grid size is weird... it's like 4x4 but really crowded, with nasty-looking empty margins.
I tried a couple of apps to change dpi values to default, but they wouldn't read current dpi and no new values could be applied. Maybe this is linked to the Play Store incompatibilities.
How must I install it? Always I installed it (from official .242 and .270 too with RockZ1 Kernel) I had many bugs on this ROM, please help me
HELP
dyonissos said:
I flashed this ROM and my Z1 does not boot at all. When i press the power button, it vibrates once and that's all.
I flashed a stock rom, re-installed recovery and created a pre-rooted zip based on the SG customized firmware. The result was the same. Black screen, no sign of activity.
Does anyone have any idea what could be wrong here?
My device is a C6903 and worked just fine with the pre-rooted .242
Thanks!
Click to expand...
Click to collapse
Please help, I'v also got the same problems. I follow everything, but now my phone can not turn on anymore, can not charge. Everytime I press power button, it only vibrate once, but still off. Please help me.
I do the steps from Kitkat and using latest DUAL RECOVERY TWRP.
Thank you in advance
busukusu said:
Please help, I'v also got the same problems. I follow everything, but now my phone can not turn on anymore, can not charge. Everytime I press power button, it only vibrate once, but still off. Please help me.
I do the steps from Kitkat and using latest DUAL RECOVERY TWRP.
Thank you in advance
Click to expand...
Click to collapse
I fond the solutions for my problems. I test Fastboot at It work. When Power Off, press Volume Up and connect the USB Cable, then I can detect my phone with command: fastboot devices
After that, using Flashtools and install any FTF source with Kitkat 108, then flash it using Flashtools at computer PC. Prepare downloaded FTF files about 1 GB size at the same computer drive, then run Flashtools and then connect Press Volume Down and connect with USB cable, after that Flashtools display will show that my phone detected / connected, and continue with flashing FTF files, the process about 10 minutes less, and after finish flashing, disconnect USB cable, press Power button and YES it work again.
After that I have to install again with TWRP and install any Stock preroot firmware.
dyonissos said:
I flashed this ROM and my Z1 does not boot at all. When i press the power button, it vibrates once and that's all.
I flashed a stock rom, re-installed recovery and created a pre-rooted zip based on the SG customized firmware. The result was the same. Black screen, no sign of activity.
Does anyone have any idea what could be wrong here?
My device is a C6903 and worked just fine with the pre-rooted .242
Thanks!
Click to expand...
Click to collapse
I had the exact same problem. Ended up going back to my nandroid backup.
I am on locked bootloader. Not sure if that is the problem.
@Ahki767 could you please post md5 of the package? I am trying to make sure my download is not corrupt.
zgomot said:
edit: One issue thus far is some incompatibility on the Play Store, for instance Galaxy On Fire - Alliances. I can download it on any rom (CM/stock) except this one. Anyway to fix this?
edit2: Are dpi values changed for the launcher? I've tried a couple of xposed modules but I can't seem to get rid of that empty edge. The grid size is weird... it's like 4x4 but really crowded, with nasty-looking empty margins.
Click to expand...
Click to collapse
if you're still on this rom, you can change the dpi in /system/build.prop look for lcd_density and change it to 480 (original value). only thing i can think of for incompatibility is maybe an out of date play services
squashbuff said:
@Ahki767 could you please post md5 of the package? I am trying to make sure my download is not corrupt.
Click to expand...
Click to collapse
md5 check: 0406a4743310ee19209cfedcf0c728c9
make sure you're flashing at least from latest kit kat or lollipop
First of all I am not a established developer still learning android system...... if anything creates problems after flashing this rom or after installing, dont blame me..
Proudly present the rom for Idol 3 6045I ported from it Chinese sibling TCL I806.
Fully working on my 6045I. Its stock 5.0.2 from TCL I806.
Many chinese apps have been removed but still few remains which can be removed by getting root.
Features:
1. Less Lags.
2. Fast.
3. Camera is working far better than the recent updates provided for 6045I.
How to install:
Caution : Before doing this, please make backup of your system & efs as mentioned by Famewolf in his thread of making backups.
1. Just download the zip from the link provided below and keep it in the root of sdcard.
2. Also download the gapps provided in the links. First link is which I installed on my device and second one is the latest. Keep it also in the root of the sdcard.
3. Now just boot into recovery mode i.e. TWRP , do not wipe anything, script will do it itself and just go to install and choose the stock chinese rom for 6045I.zip and flash.
4. Let the process to complete. It will ask to restart the system and just restart the system.
5. After first start choose language and other options, again boot into recovery mode and flash the gapps provided.
6. Here the stock chinese rom will run smoothly on your 6045I.
7. If TWRP gives error "error in executing binary" then you have to manually edit the updater-script but it depends on what your TWRP says about the error. So just ask me I will tell you what changes to make in updater-script.
After couple of manual restarts or with time rom will start to run smoothly.
Links :
Rom : removed due to some problems occurred after flashing.
gapps : https://www.androidfilehost.com/?fid=95784891001614559 or https://basketbuild.com/gapps (choose android 5.0).
For any kind of help regarding to this rom pm me or just ask in this thread.
I will try my best
Caution : Does not works on 6045Y & 6045K.
Backup efs also in case u loose ur IMEI or having error of unknown baseband/ no network
If you like my work, dont forget to hit thanks......
Sorry for all the trouble caused.
Well I am also in the same boat as well.....
yash_rathore25 said:
First of all I am not a established developer still learning android system...... if anything creates problems after flashing this rom or after installing, dont blame me..
Proudly present the rom for Idol 3 6045I ported from it Chinese sibling TCL I806.
Fully working on my 6045I. Its stock 5.0.2 from TCL I806.
Many chinese apps have been removed but still few remains which can be removed by getting root.
Features:
1. Less Lags.
2. Fast.
3. Camera is working far better than the recent updates provided for 6045I.
How to install:
Caution : Before doing this, please make backup of your system as mentioned by Famewolf in his thread of making backups.
1. Just download the zip from the link provided below and keep it in the root of sdcard.
2. Also download the gapps provided in the links. First link is which I installed on my device and second one is the latest. Keep it also in the root of the sdcard.
3. Now just boot into recovery mode i.e. TWRP , do not wipe anything, script will do it itself and just go to install and choose the stock chinese rom for 6045I.zip and flash.
4. Let the process to complete. It will ask to restart the system and just restart the system.
5. After first start choose language and other options, again boot into recovery mode and flash the gapps provided.
6. Here the stock chinese rom will run smoothly on your 6045I.
7. If TWRP gives error "error in executing binary" then you have to manually edit the updater-script but it depends on what your TWRP says about the error. So just ask me I will tell you what changes to make in updater-script.
After couple of manual restarts or with time rom will start to run smoothly.
Links :
Rom : https://mega.nz/#!88t2jJjT!dFpCY6987LAyAO2CcuKr0wmi5EPB3kRu9v8YTrNBgHs
gapps : https://www.androidfilehost.com/?fid=95784891001614559 or https://basketbuild.com/gapps (choose android 5.0).
For any kind of help regarding to this rom pm me or just ask in this thread.
I will try my best
May also work on 6045Y and 6045K : just need some willing hands.
If you like my work, dont forget to hit thanks......
Click to expand...
Click to collapse
Woohoo. Gonna download this!!!
For screenshots of rom visit this page : http://forum.xda-developers.com/idol-3/development/idol-3-source-code-available-t3180369/page14
Now going to sleep, as have to go office in morning......
Quick question. Can this rom read/write ExFat? I'd rather have my sd card formatted to that so that i can store larger movie files.
Are there any real noticeable differences besides less lag and fast? Those two mean almost the same thing. Does this ROM offer anything major that the US stock ROM doesn't? Awesome work though making a new ROM for the community to try. We appreciate your work. :good:
brian117 said:
Are there any real noticeable differences besides less lag and fast? Those two mean almost the same thing. Does this ROM offer anything major that the US stock ROM doesn't? Awesome work though making a new ROM for the community to try. We appreciate your work. :good:
Click to expand...
Click to collapse
One enhancement I read about was that it did have newer camera software. Many of the packages included are newer version levels than the ones included on our phones because the i806 came out after our models.
---------- Post added at 08:58 PM ---------- Previous post was at 08:45 PM ----------
yash_rathore25 said:
For screenshots of rom visit this page : http://forum.xda-developers.com/idol-3/development/idol-3-source-code-available-t3180369/page14
Now going to sleep, as have to go office in morning......
Click to expand...
Click to collapse
You should consider removing the system update checker from your custom rom. The icon appears in your screenshots so I'm assuming it's still included. Since the build.prop says it's a 6045i but it has the i806 codebase patches will never apply since the checksum's won't match.....so depending on what "version" it thinks it's on vs the update version the update checker will either never show an update or always show an update.
OK. I think I have this working. The ROM seems to be functional for me. Downloading all my apps now and getting it set up how I like. Will try to run it through the day tomorrow and see what I like and don't like... not expecting much difference over stock, but we'll see.
Anyone have a suggestion for a lollipop compatible "minimal gapps?" I'm really only interested in google play and gmail..no need for google+ etc.
famewolf said:
Anyone have a suggestion for a lollipop compatible "minimal gapps?" I'm really only interested in google play and gmail..no need for google+ etc.
Click to expand...
Click to collapse
I might still have a PA micro gapps file somewhere. Just need to see if it's 5.0 or 5.1.
Edit: Here you go. Just pick up the zero gapps. It works perfectly.
http://forum.xda-developers.com/showthread.php?t=2792842
Another option is the Slimgapps official thread here. They do have a "zero gapps" package, and both 5.x I think.
Sent from my 6045Y using XDA Free mobile app
yash_rathore25 said:
May also work on 6045Y and 6045K : just need some willing hands.
Click to expand...
Click to collapse
You mean testers?
Sent from my 6045Y using XDA Free mobile app
Anghirrim said:
You mean testers?
Sent from my 6045Y using XDA Free mobile app
Click to expand...
Click to collapse
Yupp bro.
Just edit build.prop with notepad++ and change it to 6045Y instead of 6045I and flash the rom.
Then check the log of TWRP specially before the error in executing updater binary.
It will say something about the check_cu.
If you will open updater script with notepad++ you will see first line of command saying "check_cu("6045I-2AALUS7");"
Just change this line ("6045I-2AALUS7") with the line shown in the TWRP similar to this ( something like 6045Y-XXXXXXX)
Then again flash the rom, gapps and hope it will work.
If it works, dont forget to hit thanks button :laugh:
Ok... I'll see, my phone is less than one week old and I swore myself that this one would be kept untouched for a year. I wanted to keep it clean for warranty purpose but one week later... I'm already rooted.
I'm kind of flashaholic so won't resist very long... Don't worry.
What will it update exactly? Is there a risk it will mess up the European radio part? Just to make sure I'll still get a good signal or loose imei.
I do have my twrp backup for boot and system image, will that be enough to get back to a previous working state?
Thanks,
Sent from my 6045Y using XDA Free mobile app
Anghirrim said:
Ok... I'll see, my phone is less than one week old and I swore myself that this one would be kept untouched for a year. I wanted to keep it clean for warranty purpose but one week later... I'm already rooted.
I'm kind of flashaholic so won't resist very long... Don't worry.
What will it update exactly? Is there a risk it will mess up the European radio part? Just to make sure I'll still get a good signal or loose imei.
I do have my twrp backup for boot and system image, will that be enough to get back to a previous working state?
Thanks,
Sent from my 6045Y using XDA Free mobile app
Click to expand...
Click to collapse
I rooted my phone the next day it came to me,
Eventually i am also not going to get warranty as I imported this device from US to India.
N I personally dont care about warranty as none of the android device gets bricked completely, there is always a way.
Like I got stucked in bootloops in try of porting cm12.1 from other device.Even my backups failed to boot. Then I followed the mobile updater app provided by Alcatel and it simply restored my device to factory rom which will get updates also.
N warranty will not work if the device got physically damaged.
Yes backup will work.
After flashing this rom I would suggest you to make TWRP backup of this rom also alongwith Stock one.
I am getting a lot of range in network selection as it contains all the radios available for this device.
Screenshots of network range:
Anghirrim said:
Ok... I'll see, my phone is less than one week old and I swore myself that this one would be kept untouched for a year. I wanted to keep it clean for warranty purpose but one week later... I'm already rooted.
I'm kind of flashaholic so won't resist very long... Don't worry.
What will it update exactly? Is there a risk it will mess up the European radio part? Just to make sure I'll still get a good signal or loose imei.
I do have my twrp backup for boot and system image, will that be enough to get back to a previous working state?
Thanks,
Sent from my 6045Y using XDA Free mobile app
Click to expand...
Click to collapse
It's much safer to mod now since with Version 4.9.2 of the Mobile Q software from alcatel (you have to tell it you have a "pixi" for that version to appear as it's so new) allows you to put the phone in "download mode" and fully restore the device to factory condition. (tested by multiple idol 3 users of both the 6039 and 6045) This goes a long way towards making the device unbrickable.
famewolf said:
It's much safer to mod now since with Version 4.9.2 of the Mobile Q software from alcatel (you have to tell it you have a "pixi" for that version to appear as it's so new) allows you to put the phone in "download mode" and fully restore the device to factory condition. (tested by multiple idol 3 users of both the 6039 and 6045) This goes a long way towards making the device unbrickable.
Click to expand...
Click to collapse
I agree with you bro......:good::good:
Thanks both for your answers. Yes the Alcatel restore software makes things way easier to fix. I already installed it yesterday to make sure my phone drivers are installed for any "phone state". I also have the android sdk installed.
By the way, I am thinking to bring my small contribution to this forum by creating an " ultimate list of mods/softwares/issues" for this phone.
There have been so many news and achivements in the past few weeks, it's a bit difficult to read everything in the correct order.
So last question, how about the radio, imei, etc... Any risk on this?
And then, I think I'll give it a try.
Sent from my 6045Y using XDA Free mobile app
Anghirrim said:
Thanks both for your answers. Yes the Alcatel restore software makes things way easier to fix. I already installed it yesterday to make sure my phone drivers are installed for any "phone state". I also have the android sdk installed.
By the way, I am thinking to bring my small contribution to this forum by creating an " ultimate list of mods/softwares/issues" for this phone.
There have been so many news and achivements in the past few weeks, it's a bit difficult to read everything in the correct order.
So last question, how about the radio, imei, etc... Any risk on this?
And then, I think I'll give it a try.
Sent from my 6045Y using XDA Free mobile app
Click to expand...
Click to collapse
In my opinion no risk of losing imei no. and radio modems
yash_rathore25 said:
In my opinion no risk of losing imei no. and radio modems
Click to expand...
Click to collapse
I'm attaching a platform.xml file already modded to allow full read/write access to the external sd (just drop the .zip off the filename as that was just to get xda to allow me to upload it...it's a text file)....you might find it useful to replace this in yours.(/etc/permissions)..other options include pre-rooting...adding in init.d support....etc.
Ran this ROM overnight and through most of my day so far (about 3 hours off the charger). First impression is that it's about the same as stock, not that I was expecting any different. You get the TCL splash screen at boot but the overall UI is pretty much the same. Since I now have root I went ahead and used app quarantine to freeze the bloatware apps I didn't want. Kinda wishing I had installed minimal gapps, but I figure I'll be reflashing again soon since the floodgates are probably about to open with new ROMS anyway.
Conclusion: If you're curious, flash it, it doesn't hurt anything. It may be a hair smoother, and I haven't really tested the camera extensively enough before or after to be able to tell a difference.
Edit: Literally as soon as I submitted this message (from my PC) I went to turn wi-fi off and the phone decided to reboot. Really odd.
@nickalltogether:
Which version of the phone do you have?
Sent from my 6045Y using XDA Free mobile app
Root Method For S8+ U/U1/W Series Phones Rev8 Bootloader
New 1 Click Method Brought To Everyone By oakieville He provide this free of charge so If you like maybe give him a little donation
Paypal email is [email protected]
Before Starting This Process Get A USB2 Mini Hub You Are Most Likely Going Too Need It. Do Not Come In Here And Post This Is Not Working Until You Have Tried It With The USB2 Mini Hub!
You Must Start From Stock U Firmware. IT Seems To Be The Less Likely To Brick Your Device As Explained In The Disclaimer!Disclaimer Please Read!!
This may brick your device there is a problem especially with s8 and note 8 models where the tz partition becomes corrupted and on some occasions after flashing combination firmware your phone will become bricked and as of now there is no way to fix it. There is no way to predict if it will happen. It doesn’t seem too happen very often on s8+ but it does occasionally happen on the other 2 models so do this at your own risk. I would say it probably happens 10 percent of the time on s8 and note 8 especially when on bit 6 or higher firmwares. S8+ it rarely happens too but it still may. If you take the risk and it happens do not pm me asking how to fix it as of time I posted this there is no way to fix it
Please Read Notes
OEM Toggle Does Nothing On US Model Phones
You will most likely need a USB 2 mini hub for Odin to work if using windows 8 or higher. I would temporarily disable windows defender or antivirus software while performing the procedure with your computer.
You cannot have root on any rom except a nougat rom also flashing custom boot images cannot be done or using systemless magisk. Hiding root or running modules cannot be done. There is no oem unlock and even if there is you cannot unlock your bootloaders or run any aosp based roms.
You can be on any firmware to achieve safestrap but to run a rooted rom you will be limited to using a special nougat android 7 rom. You can have safestrap on pie android 9 which gives you some ability to modify system files flash zips etc and have access too data and other partitions that are normally blocked but you can not run root on android 9 because root on android 9 requires a modified boot image
Anything here with a .7z extension will get unzipped before using
Anything here with a .zip extension will get flashed a zip in safestrap
Anything here with a .tar or .md5 gets flashed in odin
Anything here with a .img extension gets flashed as image in safestrap
Additional Help Can Be Found In The Telegram Channel
Telegram Channel For 8 Series Root
Downloads
Odin3_v3.14.1_3B_PatcheD.7z
SM-G955U_VZW_G955USQU8DUJ1.7z -- Stock U Firmware Flash First In Odin
SAFESTRAP_S8_PLUS_GUI_INSTALLER.7z - GUI 1 Click Method-Recommend!
Alt Method
Safestrap_S8_Plus_Cmd_Line.7z - Command Line 1 Click
Directions Once On Stock U Firmware
If using Safestrap_8_Series_Cmd_Line follow instructions on Cmd screen.
1. Download files and unzip SAFESTRAP_S8_PLUS_GUI_INSTALLER.7z
2. Plug phone into computer and allow access too phone data
3. Run the SAFESTRAP_8_SERIES.exe file. In program choose your model of phone in drop down box then click Root Button and select COMBINATION_FA70_G955USQU8ATG1.tar.md5 file too flash it is packed in the zip you downloaded from above. Everything else is automatically done for you just follow any pop up that come up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Phone will reboot too download and flash combo firmware and then reboot. Click dialog stating that it has rebooted and it will inject safestrap all automatically
5. When done you will have a minimal system with safestrap recovery
Instructions For Installing Rom
System Images
system_g955_nougat.7z - Nougat Image That Can Be Rooted
Pie With Safestrap Stock Roms Un Rooted Found Here
Canadian Roms Found Here
1. From here you will either a nougat or pie system image to your phone which will be flashed in safestrap. Reboot to safestrap using the safestrap control app once in safestrap choose wipe then advanced wipe and wipe data. Then goto home screen of safestrap using install tab and the the flash image tab at bottom. Choose system image you copied to phone. System images get flashed too system partition.
2 My nougat system images are not pre rooted if you want for root you will also need too flash a root zip in safestrap.
Root Zips For Nougat Image
EFTSU_System-v20.4_12_28_22.zipSuperSU_System_12_28_22.zipPhhs_SuperSU_S8_S9_Series.zip3. You can enter safestrap anytime on nougat by simply rebooting to recovery which will enter safestrap or by using the safestrap control app
Fingerprint Fix For Nougat Roms
SM_G955U_FINGERPRINT_FIX.exe
4. If fingerprint not working reboot phone too download mode and run this SM_G955U_FINGERPRINT_FIX.exe
Pie With Safestrap Roms
Full Guide found Here
Video Tutorial
Thank You Liset Pedraza
Method In This Video To Obtain Safestrap Has Changed But The Process Of Using Safestrap Still Pertains
S8_Series_Install_Root.mp4
drive.google.com
Credits
klabit87 - Basically Everything
GSMCHEN - The root method
elliwigy -The root method
afaneh92 -Safestrap and too much too mention[/MEDIA]
oakieville - 1 click method
S8 SM_G950U/U1/W Can Be Found Below
2023 SM-G950U/U1/W Rev8 One Click Root/Safestrap Inject Method
Root Method For S8 U/U1/W Series Phones Rev8 Bootloader New 1 Click Method Brought To Everyone By oakieville He provide this free of charge so If you like maybe give him a little donation Paypal email is [email protected].com Before Starting...
forum.xda-developers.com
N8 SM_N950U/U1/W Can Be Found Below
[NEW METHOD][ROOT] [Extreme Syndicate] [Snapdragon][N950U/U1][V8 Bootloaders]
Root Method For S8/S8+ And Note 8 Series U/U1/W Series Phones Rev8 Bootloader This may brick your device there is a problem especially with s8 and note 8 models where the tz partition becomes corrupted and on some occasions after flashing...
forum.xda-developers.com
so if i remain at nougat i should be able to flash custom roms? Also, i'm currently facing "no service" problem on my g995u. Any ideas if going back to nougat would rectify the issue?
jrkruse said:
Rooted Nougat Rom
This is last nougat rom made for S8 it is prerooted with flashfire and safestrap preinstalled. It has CSC stuff for all carriers added. Its debloated slightly with knox removed. Some stuff may not work but im not sure as I cannot test but this stuff may include fingerprint and or face recognition. If stuff doesnt work it probably related to using pie modems and non-hlos on a nougat rom which you have no choice.
Downloads
system_s8plus_brb1.7z
BL_G955_NOUGAT_V7.tar.7z
Includes Fingerprint and Face Unlock fix for above nougat rom. Just flash in BL slot in odin after everything else
Magisk_System-v20.4.zip This is system magisk not the normal systemless magisk so magisk hide and modules will not work!
SuperSU_System.zip
Safestrap-4.12-T01-DREAMQLTE_PIE.zip Will boot straight to safestrap only for pie roms
Safestrap-4.12-T01-DREAMQLTE_NOUGAT.zip Will Give you the safestrap splash screen on boot
Directions
Safestrap Method
1. Extract system.img from the system_s8plus_brb1.7z and copy to phone also copy either SuperSu_System.zip or Magisk_System-v20.4.zip reboot to safestarp and flash system image
2. Flash either SuperSu_System.zip or Magisk_System-v20.4.zip
3. Reboot to download and flash BL_G955_NOUGAT_V7.tar.md5 in odin
4. If you get constant rebooting to safestrap flash Nougat safestrap zip while in safestrap
Non Rooted Pie Rom With Safestrap Can Be Found Here
Click to expand...
Click to collapse
unfortunately i got myself a bricked device. no bootloader, no recovery, no charge, nothing...
kkins95 said:
unfortunately i got myself a bricked device. no bootloader, no recovery, no charge, nothing...
Click to expand...
Click to collapse
Does computer recognize the phone as a 9008 qualcomm device in device manager of your computer
Sent from my iPad using Tapatalk
jrkruse said:
Does computer recognize the phone as a 9008 qualcomm device in device manager of your computer
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
nope. no sign of life comming from the phone. just a flicker of white line when i hold volume down and power button. thanks for the response.
kkins95 said:
nope. no sign of life comming from the phone. just a flicker of white line when i hold volume down and power button. thanks for the response.
Click to expand...
Click to collapse
So what exactly happened?
Sent from my iPad using Tapatalk
jrkruse said:
Does computer recognize the phone as a 9008 qualcomm device in device manager of your computer
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
jrkruse said:
So what exactly happened?
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
i was on a g995u1 firwmare(bootloader v7) although i was having issues with "no signal". i thought maybe if i follow your guide to return the rom back to nougat my network would return to normal.
i only flashed this file "BL_ENG_BOOTLOADERS_SAFESTRAP_G955U_V7.tar.md5".
ps. i did tick the "nand erase" in odin.
the flash completed but my phone went black and did not reboot again.. i disconnected hoping to get it back to download mode again but nothing was working. i have tried using volume down and power keys but this only causes the a little part of the screen to flicker for less than a second.
my battery was 99%. I dont have qualcomm drivers installed. i am installing one as we speak, i have seen some threads with similar issues like mine but no solutions.. thanks for your response..:crying::crying::crying:
kkins95 said:
i was on a g995u1 firwmare(bootloader v7) although i was having issues with "no signal". i thought maybe if i follow your guide to return the rom back to nougat my network would return to normal.
i only flashed this file "BL_ENG_BOOTLOADERS_SAFESTRAP_G955U_V7.tar.md5".
ps. i did tick the "nand erase" in odin.
the flash completed but my phone went black and did not reboot again.. i disconnected hoping to get it back to download mode again but nothing was working. i have tried using volume down and power keys but this only causes the a little part of the screen to flicker for less than a second.
my battery was 99%. I dont have qualcomm drivers installed. i am installing one as we speak, i have seen some threads with similar issues like mine but no solutions.. thanks for your response..:crying::crying::crying:
Click to expand...
Click to collapse
It happens once in awhile for no reason. Nand erase may have had something too do with it. I never use nand erase except if going back too totally stock from a modified system. I responded too your pm. You’re phone can probably be fixed with edl files but you are going too have too take your phone apart and jump some test points to make phone enter edl mode
Sent from my iPhone using Tapatalk
jrkruse said:
It happens once in awhile for no reason. Nand erase may have had something too do with it. I never use nand erase except if going back too totally stock from a modified system. I responded too your pm. You’re phone can probably be fixed with edl files but you are going too have too take your phone apart and jump some test points to make phone enter edl mode
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
ive been searching for the edl points for the s955u but to no avail. ive taken apart my phone but cant find any reference online for the edl test points. i dont want to start testing randomly because something i have no idea about might happen..
kkins95 said:
ive been searching for the edl points for the s955u but to no avail. ive taken apart my phone but cant find any reference online for the edl test points. i dont want to start testing randomly because something i have no idea about might happen..
Click to expand...
Click to collapse
I use to have pics and stuff but I lost them on a hard drive that failed. I can tell you they are on the bottom side of the board and you have to pry back a metal heat shield to get too them
Sent from my iPhone using Tapatalk
jrkruse said:
I use to have pics and stuff but I lost them on a hard drive that failed. I can tell you they are on the bottom side of the board and you have to pry back a metal heat shield to get too them
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
kindly help identify them if visible or point out what i am to do next. thanks alot....
kkins95 said:
kindly help identify them if visible or point out what i am to do next. thanks alot....
Click to expand...
Click to collapse
You have to take board out and flip it over. The points are on the bottom side
Sent from my iPad using Tapatalk
jrkruse said:
You have to take board out and flip it over. The points are on the bottom side
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
OK, Thanks for the response. i see two large heat sinks with the larger one at the top and the smaller at the bottom. i assume the points would be hidden underneath the bottom sink. now i have to figure out a way to pry those metals off... so much work..lol..
Will this work on all V7 Bootloaders?
I am currently on DTF4 and noticed your on the Verizon page you posted for the DTB3 Bootloader. Thanks for your time and efforts.
jrkruse said:
This method is brought to you entirely by @elliwigy He is the reason for this exploit and method.
With that being said, Extreme Syndicate Root is now available!
Click to expand...
Click to collapse
jrkruse said:
Rooted Nougat Rom
Click to expand...
Click to collapse
Thanks this worked for me! Is there a guide on how to reverse everything if I wanted to make the phone normal again? Like it would be factory out of the box?
lonewolf1738 said:
Thanks this worked for me! Is there a guide on how to reverse everything if I wanted to make the phone normal again? Like it would be factory out of the box?
Click to expand...
Click to collapse
Just flash stock firmware in odin
Sent from my iPhone using Tapatalk
I have version 8 files so will make stuff when I get a chance
Sent from my iPhone using Tapatalk
@NateNMad
yeah its on the same bootloader G955USQU7DTF4
[ROOT] [Extreme Syndicate] [Snapdragon][G955U/U1][V7 Bootloaders]
If anyone is thinking on updating phones now is the time. The method of unlocking bootloaders on US variants works one s10/s20 and n10/n20 phones. Read the whole article too get info and yes it works I have a bootloader unlocked sm-g975u s10+ with twrp and magisk installed.
https://www.xda-developers.com/samsung-galaxy-note-20-ultra-root-us-unlocked-snapdragon-865/
Sent from my iPhone using Tapatalk