Bricked my phone - Xperia Z1 Compact Q&A, Help & Troubleshooting

bought this cheap xperia z1 compact off a friend, never used a sony phone before so i thought rooting and installing custom firmware would be same as other android devices, the phone was running lolipop and i used kingroot to root it and then used flashify to install a custom kernel without knowing the device requires bootloader to be unlocked now my device wont turn on at all it vibrates 3 times and flashes red led if i press volume up +power button, i have been reading stuff online no solutions to my problem. tried flashtool but i cant get the device to recognised on the flashtool or get into recovery mode. which ever volume button i press and hold and try to power up it flashes 3 times red led. also tried volume up/down plugging into my laptop still red led. so can this device be unbricked or is it good as dead?

big_b0sss said:
bought this cheap xperia z1 compact off a friend, never used a sony phone before so i thought rooting and installing custom firmware would be same as other android devices, the phone was running lolipop and i used kingroot to root it and then used flashify to install a custom kernel without knowing the device requires bootloader to be unlocked now my device wont turn on at all it vibrates 3 times and flashes red led if i press volume up +power button, i have been reading stuff online no solutions to my problem. tried flashtool but i cant get the device to recognised on the flashtool or get into recovery mode. which ever volume button i press and hold and try to power up it flashes 3 times red led. also tried volume up/down plugging into my laptop still red led. so can this device be unbricked or is it good as dead?
Click to expand...
Click to collapse
If bl is still locked, official Sony repair software might work, (but not sure if it will recognize that it was rooted and reject it). It's been a couple of years, but it used to be called PC Companion. You go to 'software update', and there's a 'repair phone' option.
Besides that, Flashtool is definitely your best bet. It takes a little setup, but not too bad - install Flashtool, and in the Flashtool folder is a 'drivers' folder, with a drivers.exe file. Run the exe and check boxes for 'fastboot', 'flashmode', and 'Rhine'. Let the drivers install, then connect phone in flash mode, (power off, hold volume down and plug it in). You should get 'installing device driver' popup. Click 'skip windows update check', and it will find the drivers already on computer from Flashtool. Now you need to download an ftf. Open Flashtool, and click the 'XF' button at the top. That opens Xperifirm. Find D5503, and click whatever regional fw you want. Now it will download and unpack. Whole thing takes about 10 minutes. When it's all done, open Flashtool, and select '' at the top, then choose 'flash mode', and navigate to the ftf file you downloaded. You need to double-click all the way down to the actual file and you will see all of the empty fields on the screen suddenly get filled in. If you want to go ahead and flash the whole thing, just click 'flash'; it takes about 10 minutes. Since you really only need the kernel, you can go to 'exclude' box and check everything except kernel files, then click 'flash', and it will be done in less than a minute.

Really appreciate for the information. But i just can't get flashtool or the pc companion detect the device. I don't know how to get it detected
Sent from my SM-G920F using XDA-Developers Legacy app

big_b0sss said:
Really appreciate for the information. But i just can't get flashtool or the pc companion detect the device. I don't know how to get it detected
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Did you run drivers.exe and select the 3 checkboxes mentioned? Did it install successfully? If so, what happens when you plug in in flash mode?

levone1 said:
Did you run drivers.exe and select the 3 checkboxes mentioned? Did it install successfully? If so, what happens when you plug in in flash mode?
Click to expand...
Click to collapse
Hey Levone. This bootloop thing has happened to me too. When i use flash mode, the led flashes green and then red, and nothing happens. I have my bootloader locked, and i flashed a new version of supersu, and got a bootloop. I lost my recovery, my OS, everything. I tried to get a stock firmware through xperifirm but that had a weird problem (some of the filenames were too long, so windows decided to not let me get that firmware). PC Companion does not recognize my phone. Could you help me?

levone1 said:
Did you run drivers.exe and select the 3 checkboxes mentioned? Did it install successfully? If so, what happens when you plug in in flash mode?
Click to expand...
Click to collapse
Yes i installed driver.exe and checked those 3 you mentioned. When i connect my device holding volume down it does nothing. It shows on the flash tool device disconnected.
Sent from my SM-G920F using XDA-Developers Legacy app

big_b0sss said:
Yes i installed driver.exe and checked those 3 you mentioned. When i connect my device holding volume down it does nothing. It shows on the flash tool device disconnected.
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I think you're not powered off. Hard to tell with black screen. Try holding power and volume up for a few seconds, and see if you feel 3 vibrations. The you're powered off. Then try to connect in flash mode. Flashing a bad kernel shouldn't hurt your flash mode or fastboot.
---------- Post added at 08:13 PM ---------- Previous post was at 08:10 PM ----------
DiFLA said:
Hey Levone. This bootloop thing has happened to me too. When i use flash mode, the led flashes green and then red, and nothing happens. I have my bootloader locked, and i flashed a new version of supersu, and got a bootloop. I lost my recovery, my OS, everything. I tried to get a stock firmware through xperifirm but that had a weird problem (some of the filenames were too long, so windows decided to not let me get that firmware). PC Companion does not recognize my phone. Could you help me?
Click to expand...
Click to collapse
Did you follow the drivers install instructions above? The green flash is a good sign, even if it doesn't stay lit. If you have the drivers, (and adb too, I think), you should get 'installing driver' message.

levone1 said:
I think you're not powered off. Hard to tell with black screen. Try holding power and volume up for a few seconds, and see if you feel 3 vibrations. The you're powered off. Then try to connect in flash mode. Flashing a bad kernel shouldn't hurt your flash mode or fastboot.
---------- Post added at 08:13 PM ---------- Previous post was at 08:10 PM ----------
Did you follow the drivers install instructions above? The green flash is a good sign, even if it doesn't stay lit. If you have the drivers, (and adb too, I think), you should get 'installing driver' message.
Click to expand...
Click to collapse
Yea, i got the "installing driver" message. It installed the driver "adb interface" or something like that. I don't remember what was it called, but something with adb in it. I will try using flash mode with flashtool, but i need a firmware. It would really help if you could get the ftf file from your phone and upload it to mediafire or somewhere where i can download it.

DiFLA said:
Yea, i got the "installing driver" message. It installed the driver "adb interface" or something like that. I don't remember what was it called, but something with adb in it. I will try using flash mode with flashtool, but i need a firmware. It would really help if you could get the ftf file from your phone and upload it to mediafire or somewhere where i can download it.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24269982087013637
From this thread - https://forum.xda-developers.com/so...503-14-6-1-236customizedinpre-rooted-t3265543
BTW - if you're going to go full ftf flash, might be a good idea to flash KK, which is easier to root, (doomlord toolkit), and then install recovery and flash LP prf. Otherwise, your either going to use Kingroot, or unlock bl.
KK - https://www.androidfilehost.com/?fid=24352994023709358
From - https://forum.xda-developers.com/so...503-14-4-0-157customizedinpre-rooted-t3193075

levone1 said:
https://www.androidfilehost.com/?fid=24269982087013637
From this thread - https://forum.xda-developers.com/so...503-14-6-1-236customizedinpre-rooted-t3265543
BTW - if you're going to go full ftf flash, might be a good idea to flash KK, which is easier to root, (doomlord toolkit), and then install recovery and flash LP prf. Otherwise, your either going to use Kingroot, or unlock bl.
KK - https://www.androidfilehost.com/?fid=24352994023709358
From - https://forum.xda-developers.com/so...503-14-4-0-157customizedinpre-rooted-t3193075
Click to expand...
Click to collapse
Thank you very much. I really appreciate it

Related

It wont boot up .... Help!!!

Ok after my sony ericsson xperia play did the software upgrade while on the charger, it will not boot back up!!
Not sure what happend, but when you press the power button, it only vibrates once but will not boot back up!
It just shows a black screen!!!!
I have sent it in to the shop and we are stuck as to how to get it on.
You can not even get into the boot loader screen!
Its been a week, and i don't know what the hell to do!!!
Some one please help!!!!
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Yes it dose, the tech guy and me have tried to do so, however the computer sees the device but dose not know what it is, however even when the files are finished it sitll dose not boot up!
jacklebott said:
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Click to expand...
Click to collapse
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
It dose not light up blue, but it dose not go into the recovery screen at all, in fact when you press the power button, gives a small vibrate and the screen is still black!
Also when you put it on the charger the LED light is green, really frustrated.
However, I am new at this, like I said only had the device for a day, and this happened after I did a software update, so I am not sure what a CWM means, kindly clarify, think of giving instructions not just to a newbie, but to some one that has no clue what is going on! LOL sorry man I really am new to all of this, I just want it to work, so kindly provide me with step by step instructions that you would give to a five year old child.
Hmm... that's interesting. A CWM is a custom recovery. Green light when plugged in means its charging. It sounds almost like your phones LCD is not receiving a signal anymore, if that's the case, seeing as you wouldn't see anything on the screen in order to even do a recovery, I don't see a lot of options here. If its brand new, then its under warranty, take it back and exchange it.
Sent from my R800x using XDA App
This has nothing to do with your LCD =|.
It's sony's stupid software bricking the xperia play for no valid reason ; happened to me as well.
Only fix is to download Sony Ericsson Update Service and keep on retrying the software update after it fails ; This is not the Sony Ericsson Pc Suite ; Also try removing the battery for 30 seconds after 6-8 retries on SEUS - happened to me a few times after the original occurence since i was trying to get back to complete stock.
Thanks for the input, I was lost on how to help out on this one! I thought it was only bricking the rooted unlocked phones.
XperianceIT
sent from my Xplay R800X, using XDA App!
Thanks, so I need to use the update app from Sony Ericsson?
I will try it, however would it work after I flashed it ?
I did a few times and it took the flash files, yet still wont boot up.
XperianceIT said:
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
Click to expand...
Click to collapse
I wasn't trying to get him to use fastboot (blue light), I was saying to go into flash mode (green light)
Its still not booting up and the pc is now saying it dose not recognise my device!!
What to do????
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
Connect it to your PC with USB, Then go to support Zone in Pc Companion then select Phone software update and click Repair and follow the instructions, it worked for me when pc companion decided to brick me...
EDIT: Or you could always Flash 2.3.4, tut here: http://forum.xda-developers.com/showthread.php?p=20151540 just follow the first two posts, I believe it will work if Flashmode is still working (The tut will tell you how to get into there)
correct me if I have said anything wrong, was in a rush.
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
When you connect the phone to the pc does the led stay green, if it does that's called flash mode , keep.on tryimg seus to flash the phine, this is not included in pc companion and is separate software
Sent from my R800i using XDA App
This happened to me to, so you are saying I should use SEUS to update over and over until it works?
---------- Post added at 09:32 PM ---------- Previous post was at 09:27 PM ----------
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Should I do an update or the reset and update option in SEUS?

Xperia S Fastboot problem

So I was about to root my Xperia S and started reading a guide, it said that I would need to load some files into the phone using fastboot. After a while I figured out how to fastboot and managed to get the popup on my computer once, however, I didn't install it that time and now when I try to fastboot again I get the blue LED on my phone, my computer makes some noises indicating that something unusual have been conected, nothing happens and the phone shows the Sony logo.
Does anybody know how to fix the problem and get the popup on the computer to re apear.
I run a 64 bit windows 7 home premium.
Thanks.
HugoNikanor said:
So I was about to root my Xperia S and started reading a guide, it said that I would need to load some files into the phone using fastboot. After a while I figured out how to fastboot and managed to get the popup on my computer once, however, I didn't install it that time and now when I try to fastboot again I get the blue LED on my phone, my computer makes some noises indicating that something unusual have been conected, nothing happens and the phone shows the Sony logo.
Does anybody know how to fix the problem and get the popup on the computer to re apear.
I run a 64 bit windows 7 home premium.
Thanks.
Click to expand...
Click to collapse
Hi HugNikanor..
When I Unlocked The Bootloader and Was Going To Start Root Process.. I had The Same Problem..
If I remember Correctly It Was a Driver Issue..
In FlashTool Folder There Is Another Folder Called Drivers.. Have U Tried Installing The Fastboot Drivers From There..?
ahmedyar91 said:
Hi HugNikanor..
When I Unlocked The Bootloader and Was Going To Start Root Process.. I had The Same Problem..
If I remember Correctly It Was a Driver Issue..
In FlashTool Folder There Is Another Folder Called Drivers.. Have U Tried Installing The Fastboot Drivers From There..?
Click to expand...
Click to collapse
I don't have anything from flashTool. The guide I used is this: AddictiveTips . com and searched for Root xperia S (it's the one that doesn't say gingerbread.) if that can help in any way.
HugoNikanor said:
I don't have anything from flashTool. The guide I used is this: AddictiveTips . com and searched for Root xperia S (it's the one that doesn't say gingerbread.) if that can help in any way.
Click to expand...
Click to collapse
Ok.. You Are Trying To Root Using Fastboot Mode..
I Assume You Have Already Unlocked The Bootloader.. Which Firmware Version You Are Using.. Is It Sony ICS 6.1.A.0.452..?
ahmedyar91 said:
Ok.. You Are Trying To Root Using Fastboot Mode..
I Assume You Have Already Unlocked The Bootloader.. Which Firmware Version You Are Using.. Is It Sony ICS 6.1.A.0.452..?
Click to expand...
Click to collapse
If I wasn't clear enough In my previus post, I am curently trying to unlock bootloder, to later be able to root the device.
The version of the firmware I am using is 6.A.0.452 running android 4.0.4.
HugoNikanor said:
If I wasn't clear enough In my previus post, I am curently trying to unlock bootloder, to later be able to root the device.
The version of the firmware I am using is 6.A.0.452 running android 4.0.4.
Click to expand...
Click to collapse
So for Unlocking Bootloader You have to use fastboot mode.. ok
and after that, for rooting it should be done using flashtool in fastboot mode..
so here is the thing.. Download The Flashtool first And After extracting the files You'll Find a Folder Named Drivers.. first Install The Fastboot Drivers Even To Unlock The Bootloader..
ahmedyar91 said:
So for Unlocking Bootloader You have to use fastboot mode.. ok
and after that, for rooting it should be done using flashtool in fastboot mode..
so here is the thing.. Download The Flashtool first And After extracting the files You'll Find a Folder Named Drivers.. first Install The Fastboot Drivers Even To Unlock The Bootloader..
Click to expand...
Click to collapse
That might help me get somewhere, I am going to bed now but I will definitly try that method tomorow. Thanks.
HugoNikanor said:
That might help me get somewhere, I am going to bed now but I will definitly try that method tomorow. Thanks.
Click to expand...
Click to collapse
No problem..And I Hope It'll Work... And Post Back After Trying That Stuff...
ahmedyar91 said:
No problem..And I Hope It'll Work... And Post Back After Trying That Stuff...
Click to expand...
Click to collapse
Got that part working now, now just to fix to problem with the phone going out of fastboot mode way to fast. But I think I have seen a guide for that somewhere else.
I will report back after future succes or failures with the project.
Got bootloader unlocked!
Thanks alot for the help with Flashtools. All the guides I found just asumed that you just knew a lot of things which kinda complicated it for me.
Again, Thanks!
HugoNikanor said:
Got bootloader unlocked!
Thanks alot for the help with Flashtools. All the guides I found just asumed that you just knew a lot of things which kinda complicated it for me.
Again, Thanks!
Click to expand...
Click to collapse
No Problem My Friend.. I am Glad I Helped You..!!!
neither fastboot nor flashmode!!!!!
Hi,
I can't connect my phone in flashmode nor in fastboot mode. Whenever i connect it in flashmode/fastboot mode my PC stucks(hangs) and i have to restart it again i have installed all the drivers for all devices but still the problem exists. Any help in this regards???
Also to mention i'm using Windows XP SP3 and flashtool version is 0.9.1.0.
I have also one more issue when i connect my phone to the charger when it is switched off the phone does not charge at all it simply shows me the sony logo and keeps showing it again and again but never charges. In short when my battery is complete i cannot get it back to life due to this problem but thank god that i have installed CWM on my phone.
Thanks for helping i'll also post this in the development section also.
I have no idea to your problem, but I would guess that it have something to do with you using xp, or maybe some damage on your phone.
Sent from my LT26i using xda app-developers app
shoz_on4u said:
Hi,
I can't connect my phone in flashmode nor in fastboot mode. Whenever i connect it in flashmode/fastboot mode my PC stucks(hangs) and i have to restart it again i have installed all the drivers for all devices but still the problem exists. Any help in this regards???
Also to mention i'm using Windows XP SP3 and flashtool version is 0.9.1.0.
I have also one more issue when i connect my phone to the charger when it is switched off the phone does not charge at all it simply shows me the sony logo and keeps showing it again and again but never charges. In short when my battery is complete i cannot get it back to life due to this problem but thank god that i have installed CWM on my phone.
Thanks for helping i'll also post this in the development section also.
Click to expand...
Click to collapse
I had the same problem, try disabling your firewall and disable the security installed in your pc when you try this..
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
ahmedyar91 said:
Hi HugNikanor..
When I Unlocked The Bootloader and Was Going To Start Root Process.. I had The Same Problem..
If I remember Correctly It Was a Driver Issue..
In FlashTool Folder There Is Another Folder Called Drivers.. Have U Tried Installing The Fastboot Drivers From There..?
Click to expand...
Click to collapse
should I unlock the boot loader to flash via fastboot?
banguncool said:
should I unlock the boot loader to flash via fastboot?
Click to expand...
Click to collapse
Yes ! You must have an unlock bootloader to flash (kernel, system, userdata)
via fastboot or via flashtool :laugh:
Hello I have an Xperia S, with bootloader locked and recently installed a ROOM in order to get the 6.A.1.2.55 with root.
Installed from a ZIP from recovery mode following this post:
http://forum.xda-developers.com/show....php?t=2009672
Now when I try to do step 7 (flash kernel and Baseband) Using Flashtool, Im unable to enter to the mode; when the windows prompts me, I turn off the phone, press and hold Vol up connect the USB but nothing happens, only the Sony Logo and then the icon of charging battery, I also tried to turn off the phone while holding Power button + Vol up (at the same time) and get the 3 vibrations, but the same result when I connect, the logo and the charging animations/icon..( no LED of any color or anything)
Im using the latest Flashtool version (0.9.9.0) with the drivers intalled (even though Windows security constantly pestered me about not being able to identify the source and signture) on Windows 7 64 bits..
Thank you..
sordatos said:
Hello I have an Xperia S, with bootloader locked and recently installed a ROOM in order to get the 6.A.1.2.55 with root.
Installed from a ZIP from recovery mode following this post:
http://forum.xda-developers.com/show....php?t=2009672
Now when I try to do step 7 (flash kernel and Baseband) Using Flashtool, Im unable to enter to the mode; when the windows prompts me, I turn off the phone, press and hold Vol up connect the USB but nothing happens, only the Sony Logo and then the icon of charging battery, I also tried to turn off the phone while holding Power button + Vol up (at the same time) and get the 3 vibrations, but the same result when I connect, the logo and the charging animations/icon..( no LED of any color or anything)
Im using the latest Flashtool version (0.9.9.0) with the drivers intalled (even though Windows security constantly pestered me about not being able to identify the source and signture) on Windows 7 64 bits..
Thank you..
Click to expand...
Click to collapse
Dude for bootloader locked u have to press volume down button & connect usb.
Its flashmode not fastboot mode
Press Thanks
Sent from my LT26i using xda premium
I do that. I've flashed it before that why I don't understand (i meant volume down)
But maybe I did something wrong.
Thanks.
Sent from my LT26i using xda app-developers app
HugoNikanor said:
Got bootloader unlocked!
Thanks alot for the help with Flashtools. All the guides I found just asumed that you just knew a lot of things which kinda complicated it for me.
Again, Thanks!
Click to expand...
Click to collapse
hi, i have the same problem my phone goes away from fastboot state very soon! i cant do anything using fastboot.exe.
(Xperia acro s) blue led turned on and after a few seconds sony trade mark shown!

[Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it

Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Sv: [Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it
yazanallahham said:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Click to expand...
Click to collapse
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Destroyedbeauty said:
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes it was unlocked using the SE method:crying:
yazanallahham said:
Yes it was unlocked using the SE method:crying:
Click to expand...
Click to collapse
I think your CMW is removed.
you have to flash kernel once again.
bjchettri said:
I think your CMW is removed.
you have to flash kernel once again.
Click to expand...
Click to collapse
how to flash it if my pc doesn't recognize my phone?
yazanallahham said:
how to flash it if my pc doesn't recognize my phone?
Click to expand...
Click to collapse
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
bjchettri said:
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
Click to expand...
Click to collapse
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
yazanallahham said:
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
Click to expand...
Click to collapse
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
bjchettri said:
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
Click to expand...
Click to collapse
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
yazanallahham said:
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
Click to expand...
Click to collapse
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
bjchettri said:
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
Click to expand...
Click to collapse
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Hi yazanallahham
I have the same issue, could not find any solution yet, wondering if you have fixed your fone ?
yazanallahham said:
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Click to expand...
Click to collapse
Is your bootloader unlocked?If its locked then try to fix it with SEUS not PC Companion downlod SEUS and try.
Sent from my Xperia Arc LT15i using XDA

Cant Get To FastBoot or Flash Mode

I recently flashed CM9 to my phone, but now i want to move on to JB, but for some reason i can not get into flash mode to write a different FTF.
When i I try to get into flash mode, I power the device off, hold the back button, and insert the USB cable. The LED on top flickers green then the screen comes on the the charging screen.
The same happens when I try to use fastboot except blue light flickers.
I have tried diferent computers, cables and OS's im not sure what else to try.
Download flashtool and install the drivers for your phone then leave your phone and enable unknown sources and enable usb debugging then open flashtool then press flash icon and select fastboot mode then plug your phone in then select reboot into fastboot mode via adb
Sent from my R800i using xda app-developers app
FaiselW said:
Download flashtool and install the drivers for your phone then leave your phone and enable unknown sources and enable usb debugging then open flashtool then press flash icon and select fastboot mode then plug your phone in then select reboot into fastboot mode via adb
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I ran the driver utility and even when I send reboot bootloader via adb, the LED only flickers blue for a moment, then it boots to CWM.
I didn't think the drivers on the computer would change if the phone goes into flash mode or not though.
Default Cant Get To FastBoot or Flash Mode
You would need to be in flashmode (green light) to install a stock FTF not fastboot mode has suggested above. Have you tried flashing another version of CM9 with your phone via cwm and then trying from there see if the problem is not your rom.If not it could be a driver issue.
tallman43 said:
You would need to be in flashmode (green light) to install a stock FTF not fastboot mode has suggested above. Have you tried flashing another version of CM9 with your phone via cwm and then trying from there see if the problem is not your rom.If not it could be a driver issue.
Click to expand...
Click to collapse
I know i need to be in flash mode, i just reinstalled cm9.1.0 and it still has the same problem. I dont know what to do. I have tried multiple cords, I have used ubuntu ,win7 and win8 with the drivers installed and reinstalled. Im worried that my phone is broken.
Ngong0 said:
I know i need to be in flash mode, i just reinstalled cm9.1.0 and it still has the same problem. I dont know what to do. I have tried multiple cords, I have used ubuntu ,win7 and win8 with the drivers installed and reinstalled. Im worried that my phone is broken.
Click to expand...
Click to collapse
(1) Have you installed other roms before your problem started did this only start after installing CM9
(2) Have you flashed any other kernels before CM9 or was CM9 your first rom/kernel flash
Noticed on your first post you wrote that you hold the back button then attached the usb did you do this when flashtool said or before, you need to connect the usb exactly when flashtool tells you to like below step 5
(1) How to flash a stock .ftf Rom
(2) load & place .ftf rom in Windows/flashtool/firmware folder
(3) Open flashtool press lightening icon press flashmode
(4) Select your .ftf you placed in flashtool /firmware folder earlier
(5) Wait! Flashtool will tell you to connect your phone!
(6) Press & hold back button while connecting phone to PC green light will come on.
(7) Wait while flashtool starts flashing your stock rom.When finished it will tell you to reboot
(8) Finished unplug switch your phone on done!
Sorry if you already do it like this but some people forget and connect the usb too early Also I would recommend downloading a different version of flashtool some people have managed to get there phone working by using a older version of flashtool:good:
tallman43 said:
(1) Have you installed other roms before your problem started did this only start after installing CM9
(2) Have you flashed any other kernels before CM9 or was CM9 your first rom/kernel flash
Noticed on your first post you wrote that you hold the back button then attached the usb did you do this when flashtool said or before, you need to connect the usb exactly when flashtool tells you to like below step 5
(1) How to flash a stock .ftf Rom
(2) load & place .ftf rom in Windows/flashtool/firmware folder
(3) Open flashtool press lightening icon press flashmode
(4) Select your .ftf you placed in flashtool /firmware folder earlier
(5) Wait! Flashtool will tell you to connect your phone!
(6) Press & hold back button while connecting phone to PC green light will come on.
(7) Wait while flashtool starts flashing your stock rom.When finished it will tell you to reboot
(8) Finished unplug switch your phone on done!
Sorry if you already do it like this but some people forget and connect the usb too early Also I would recommend downloading a different version of flashtool some people have managed to get there phone working by using a older version of flashtool:good:
Click to expand...
Click to collapse
(1) yes, i have installed several roms before CM9 and i was always able to enter flash mode.
(2)I have tried doom kernel and several other kernels as well
I have waited till flash tool prompts, but IIRC id didn't matter in the past, flashtool would see what mode it was in and proceed.
Thank you for the descriptive reply.
Did you try a older version of flashtool http://androxyde.github.io/index.html?1375894152000
tallman43 said:
Did you try a older version of flashtool http://androxyde.github.io/index.html?1375894152000
Click to expand...
Click to collapse
I just tried versions 7 and 8, it doesn't seem to help.
I feel like this is something wrong with my phone though, I remember the phone being able to go into fast boot and flash mode at any time, as long as the computer was on. It is really weird how it flashes the color on the LED.
Ngong0 said:
I just tried versions 7 and 8, it doesn't seem to help.
I feel like this is something wrong with my phone though, I remember the phone being able to go into fast boot and flash mode at any time, as long as the computer was on. It is really weird how it flashes the color on the LED.
Click to expand...
Click to collapse
I so this quote on another thread similar problem to yours this is what he did:
Quote: Funny thing though is that in order to get into either mode, I have to remove the battery while it is plugged in and then hold down the corresponding key while inserting the battery and the corresponding light will then light up. That seems to be the only way to get into the modes. And sometimes this does't work, but it seems to work more than not.
This guy did this to get into fastboot and flashmode worth a try?
tallman43 said:
I so this quote on another thread similar problem to yours this is what he did:
Quote: Funny thing though is that in order to get into either mode, I have to remove the battery while it is plugged in and then hold down the corresponding key while inserting the battery and the corresponding light will then light up. That seems to be the only way to get into the modes. And sometimes this does't work, but it seems to work more than not.
This guy did this to get into fastboot and flashmode worth a try?
Click to expand...
Click to collapse
no luck... The light only blinks then goes into charging mode...
Edit:Is there a test point or something that would force the phone into one of these modes?
Ngong0 said:
no luck... The light only blinks then goes into charging mode...
Edit:Is there a test point or something that would force the phone into one of these modes?
Click to expand...
Click to collapse
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
tallman43 said:
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
Click to expand...
Click to collapse
Im looking to possibly switch carriers and this will be just another push towards it. lol
tallman43 said:
Sounds like TA damaged you could try this but it's a paid service http://octopusbox.com/eng/news/details/259....Or someone reading this thread might know a better way :fingers-crossed:
Click to expand...
Click to collapse
I read this for another phone and it is a shot in the dark, but if the boot block were zeroed out, it forces it into fastboot. If this can possibly work, what block device is the boot partition?
I will not bee too disappointed if the phone is bricked.
Ngong0 said:
I read this for another phone and it is a shot in the dark, but if the boot block were zeroed out, it forces it into fastboot. If this can possibly work, what block device is the boot partition?
I will not bee too disappointed if the phone is bricked.
Click to expand...
Click to collapse
huh? can you say that again please.
Hi guys!
I have Sony Xperia Arc S.
Is it possible to put it in a Flashmode without a "Back" button? My BackButton is broken, I think it is a road-wire on the button's board.
BTW Fastboot mode working fine.

Z1C won't stay in flashmode

Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
So what is the problem? If the phone does not stay long enough in flashmode, try this:
Open flashtool
Click flash, and set up everything (firmware, wipe, etc.)
Now click on flash
After 30 seconds plug in your phone in flashmode.
twilliams08 said:
Ok so I've been trying to get flashtool to work with my xperia z1c but I can't get the phone to stay in flashmode. The green led lights briefly and flashtool detects a device in flashmode but after a short time it just drops out of flashmode and boots normally. I originally blamed windows 8.1 but have tried 2 windows 7 machines with the same results. Have tried the Sony z1c drivers package and the latest flashtool drivers - same result. I've searched on Google and found people with the same problem on different xperia devices but has anyone else had the same problem with their z1c? if so has anyone solved it?
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
Happened to me too. I just flashed it before it rebooted, once it starts flashing it wont reboot it'll finish the process. So no worries everything worked out fine.
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
z1c flash mode
twilliams08 said:
Thanks for the responses. I'd previously tried to flash an ftf by putting the phone into flashmode first then pressing flash and it always rebooted before the files were prepared so assumed there was something wrong. If you prepare the files first then put the phone into flashmode then all is okay. Thanks again.
Sent from my D5503 using xda app-developers app
Click to expand...
Click to collapse
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
semolation said:
hey guys
i have same problem with my z1c but with a difference that my phone doesn't boot into flash mode at all , even for a second
its led just become green and then red and turn off
do you know what's the problem?
i unlocked the bootloader and its rom is cm 11
Click to expand...
Click to collapse
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
moonryder said:
how do you boot into flashmode?
the right way is: turn off your device, open flashtools, choose flashmode, choose your ftf you want to flash and wait until finished,
push Vol- and hold it, then plug your device via usb to the computer, then flashtool does its job...
Click to expand...
Click to collapse
i do it as you said
but it doesn't recognize the phone
semolation said:
i do it as you said
but it doesn't recognize the phone
Click to expand...
Click to collapse
1. install Flashtool-drivers (you will find it in Flashtool\drivers
2. reboot your device
3. connect your device to PC (now it will be recognized)
4. shutdown your device
5. now the same as i mentioned in my previous post

Categories

Resources