Bootloader Unknown? Chinese version Z00A - ZenFone 2 Q&A, Help & Troubleshooting

I bought my phone from a chinese seller, its the 1.8ghz 4GB Ram and 16gb internal memory version.
It already had the WW version of LL, I followed a guide in the asus forums and reflashed the recovery and the rom from ww (just to be sure it was not in the chinese rom)
Afterwards I did adb sideload to MM. So far so good.
But if I go to the recovery there are several issues, first off when I boot to the recovery it appears the "Error!" screen, I searched and if I power button and volume up quick, I get to the recovery. And before choosing to enter the recovery, fastboot mode??, there are some status messages and they show the product name, variant, etc. Some of them show unknown, BL_Version, HW_Version, Signing, Secure_boot
Is there any fix for this? Is it safe to unlock the bootloader like this? I think I might have a diferent bootloader, ie MM FW with LL BL.
Thanks

dicamarques said:
I bought my phone from a chinese seller, its the 1.8ghz 4GB Ram and 16gb internal memory version.
It already had the WW version of LL, I followed a guide in the asus forums and reflashed the recovery and the rom from ww (just to be sure it was not in the chinese rom)
Afterwards I did adb sideload to MM. So far so good.
But if I go to the recovery there are several issues, first off when I boot to the recovery it appears the "Error!" screen, I searched and if I power button and volume up quick, I get to the recovery. And before choosing to enter the recovery, fastboot mode??, there are some status messages and they show the product name, variant, etc. Some of them show unknown, BL_Version, HW_Version, Signing, Secure_boot
Is there any fix for this? Is it safe to unlock the bootloader like this? I think I might have a diferent bootloader, ie MM FW with LL BL.
Thanks
Click to expand...
Click to collapse
buddy you don't have any issue with your device. and the error screen while entering recovering mode is usual. if you don't like that flash twrp. you will overcome that issue. also fasboot screen showing versions as unknown is also not an issue.

sukhwant717 said:
buddy you don't have any issue with your device. and the error screen while entering recovering mode is usual. if you don't like that flash twrp. you will overcome that issue. also fasboot screen showing versions as unknown is also not an issue.
Click to expand...
Click to collapse
Well I unlocked the bootloader, installed twrp and rooted using the new Toolkit available here and it still says BOOTLOADER STATUS: UNKNOWN in the toolkit window.
Also, now when I boot it theres an error screen saying that cant verifiy some signature, right before asus logo, is it because of the Unlock of the bootloader?

Related

[Q] Help! - Rooted Zenfone 2 (ZE551ML) bricked after OTA accidently

followed a tutorial (Cnncted's youtube clip - How to root the ASUS ZenFone 2 ) to root
Accidentally (very stupid) pressed the update option when an OTA update showed up yesterday (Jul 8 2015), and after that the phone won't start properly - stopped at in search of incredible...
No luck with trying to boot into recovery mode (power + volume up). It just vibrates once and the screen is black. Trying to flash recovery image with ADB and flashtool etc, but the MTP usb connection failed. If I connect it to the PC using the USB cable and then press the power button to turn it on (stuck in that ..."incredible" screen), device manager shows the Z200AD name with a yellow exclamation mark beside, and Asus ZenUI software will automatically start. But it's not really recognized by the PC.
So...if you have any suggestions for me to try, please let me know and that would be greatly appreciated!
Harry
p.s. This is a US version, so the it's the WW sku?
Same problem here. I have a rooted 551ML and on July 6th I received an OTA update. I installed it and I'm stuck in boot loop. I have hundreds of family pictures in the internal memory.
The good news is that I have access to boot loader and recovery.
I could not find any custom recovery for Zenfone 2. They are not out yet, right? Is there any way to copy the internal memory of the phone (that doesnt load the OS) to the SD card? Or to paste a file img.boot taken from a downloaded official rom and copy it over the corrupted one on the phone's memory?
If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.
joel.maxuel said:
If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.
Click to expand...
Click to collapse
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...
I faced this problem too. All I did was to flash the boot.img of my version using fastboot,
Then I flashed the firmware, without factory reset I started the phone.
I was continiously getting an error "com.android.process has stopped". Ignoring that, I just backed up my whole data. Did a factory reset. Updated
Boom!! Everything was normal... I hope this helps
Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
xxmmx said:
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...
Click to expand...
Click to collapse
xxmmx said:
Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
Click to expand...
Click to collapse
Isn't everyone serial number the same? mine is.
This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
GGL-Daz said:
Isn't everyone serial number the same? mine is.
Click to expand...
Click to collapse
xxmmx said:
This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
Click to expand...
Click to collapse
Pretty sure rooting didn't affect my fastboot screen at all.
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.
dip_anker said:
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.
Click to expand...
Click to collapse
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.
5ifty1 said:
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.
Click to expand...
Click to collapse
i tried it with prerooted as well as the stock rom, it did not work for me. isn't there any way to flash CM12.1 using the fastboot ?

Bricked Zenfone, Out of ideas

Hello everyone, need a little help if possible .
The say curiosity killed the cat, well… it killed my phone. To be more precise I wanted to know if my 550ml (with unlocked bootloader and running cm12.1) could run a 551ml firmware so… I did install thru TWRP the superzen firmware and after that the screen turned black. Can’t see anything . Not even in fastbootmode, no logo, no nothing. If I turn it on and plug it to the pc it shows, I see the internal memory and the sdcard. It’s gotta be from the different resolution that 550 and 551 have but how do I change it since I can’t see anything?
I did a userdata reset thru fastboot, wiped cache , reinstalled stock recovery ,boot recovery, tried to install stock firmware, still no change. I even managed to enter stock recovery and did an adb sideload of the latest firmware from the asus site.
As for now the phone boots, the capacitive buttons respond, the led indicates that it charges, the pc sees it but no matter what I do the screen remains black. Most likely I’m on the setup wizard but like I said I don’t see anything.
So… What can I do now? To the Asus service with it or …?
I'm not much of a forum user so go easy on me. Thank you.
Not sure if it's going to make a difference but here is an idea, try sideloading a cm recovery and flash a cm rom and see what it does...
fastmix said:
Not sure if it's going to make a difference but here is an idea, try sideloading a cm recovery and flash a cm rom and see what it does...
Click to expand...
Click to collapse
Unfortunately it does not work, when i try to sideload a rom with twrp it gives this: error closed. Probably because usb debugging is not enabled... and in cwm different error: Device unauthorized...
Are you sure bootloader is unlocked?
It has to be unlocked cause i can flash permanent TWRP and when I enter TWRP recovery i can touch the buttons, even tried to do a restore in the dark... But nothing... Still the black screen persists... Thank you anyways.
PS: Well it looks like I've managed to resolve my problem. Thanx to user helroz i have found in his google drive a Raw firmware and I was able to flash it via fastboot with Asus Flash tool and now the phone booted, no more black screen for me. Lesson learned.

Stuck at boot logo after partitioning externalSD in twrp

Hi guys. One of my friend has this phone. Yesterday night he did these steps:
1. unlocked bootloader (booting properly)
2. flashed twrp recovery
3. flashed su for rooting but didnt know how to update su binaries (booting properly)
4. went to twrp and partitioned external sd card (fat32+ext3+swap)
5. fixed permission
after restarting it got stuck at htc boot logo
so he gave me phone for repairing xD
here's status.
i removed sdcard.. put it in card reader.. n merged all partitions into single one just like it was before partitioning
now, i am able to see that white screen called "software status" (don't what does it called) through which i can have access to:
recovery
factory reset
simlock
check smartsd
image crc
show barcode
so basically, i need to get the installed stock htc firmware working again.
i searched forums and found European stock 5.0.2 fw. so should i flash that zip from twrp on this Indian origin phone??
or should i try factory resetting from that white screen??
basically i want to undo partitioning modifications from os and get the phone working on stock fw just like before. thanks
The "software status" white screen is fastboot. After reading your post, I think that the problem is that the device is rom-less, and I assume it happened when your friend repartitioned SD card.
Since the device is unlocked and you have a custom recovery installed, I'd go and try to install any of the custom roms posted here in the forums.
Check what version of twrp you have because there are some roms that don't run with older versions.
Thanks for replying. I'll try any custom based rom. The recovery is 2.8.1.0 (AZ development flash screen appears before twrp home screen). However, I want to know, if the European stock fm will work on this Indian variant device? Coz I tried to search for Indian / Asian fm files but no luck. How do I get exact fm matching with this one?
By fm you mean radio?
Anyway don't worry about that, because I live in Argentina and haven't had any problems with any rom I flashed.
If I were you, I'd flash this rom http://forum.xda-developers.com/showthread.php?t=3249856 because it's pretty much bugless and doesn't have any mods pre-installed.
Just out of curiosity, could you go to fastboot and post the software version number? That'd be useful in case we can find a stock backup for your variant.

Oneplus 3 Bricked - Unbrick doesn't work...

Hello guys,
my Oneplus 3 is hard bricked, I tried the methods in the Mega Unbrick guide, my device already gets shown as Qualcomm 9008 ... in Device Manager, so I started the MSM DownloadTool and it flashed anything without errors. But when the phone reboots I get a black screen and the white led is on.
I can't even boot to stock recovery (Volume down + power doesn't work and rebooting to recovery through fastboot doesn't work, too....) my bootloader is locked and all attempts to unlock the bootloader are failing with the error "remote: oem unlock is not allowed"
So at the moment I'm stuck in fastboot and nothing else works -.-
Can someone please help me?
The unbrick tool has an old firmware, can I replace the files with files from a newer firmware?
Thanks!
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Puddi_Puddin said:
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Click to expand...
Click to collapse
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
min-dfreak said:
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
Click to expand...
Click to collapse
Ye thats the only thing you can currently do... May i ask what you have done how did it get bricked?
I just updated AICP ota and after flashing the update my phone didn't boot up. The screen went black immediately.
So I thought that it is maybe a Problem with the ROM and I tried to go back to stock.
Flashed the stock recovery and locked the bootloader, but I couldn't boot to the stock recovery.
There it started...
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
drmuruga said:
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
Click to expand...
Click to collapse
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
min-dfreak said:
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
Click to expand...
Click to collapse
Never but never lock your bootloader...
If recovery, boot or system partition is modified. There's no harm in re locking otherwise..
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Dsn Fouad said:
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Click to expand...
Click to collapse
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
SivaMaxwell said:
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
Click to expand...
Click to collapse
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Dsn Fouad said:
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Click to expand...
Click to collapse
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
SivaMaxwell said:
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
Click to expand...
Click to collapse
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Dsn Fouad said:
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Click to expand...
Click to collapse
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Thanks i will download and give it a try
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Dsn Fouad said:
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Click to expand...
Click to collapse
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
SivaMaxwell said:
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
Click to expand...
Click to collapse
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Dsn Fouad said:
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Click to expand...
Click to collapse
Even if the bootloader is locked, you can boot into the current rom and unlock simply by going to advanved options.
It is a very simple process.

Zenfone 2 Can't go into Recovery mode

Hi, i just recently bought a used zenfone 2. It has a really old version of lollipop android (2.13 version) and i want to upgrate to 6.0 android. Problem is i can't get into recovery mode. Everytime i download the update phone restarts, but instead of seeing recovery screen i see usb sign. The phone turns off after a while and tries again-but same usb screen. Getting into it manually i get the same usb screen. What to do? All i can guess that the phone was tried to be rooted and failed, as i found SU program.(Phone itself boots up normally as i should!)
I'm still new to these things, so please keep it as simple as possible and ask anything more you need to know.
here are two things if you think BL is already unlocked download latest TWRP and flash that. if you think BL is locked download recovery image for the same version you are currently on and flash via fastboot
sukhwant717 said:
here are two things if you think BL is already unlocked download latest TWRP and flash that. if you think BL is locked download recovery image for the same version you are currently on and flash via fastboot
Click to expand...
Click to collapse
Well that's the thing, i can't do both ways, cause holding power+volume up buttons i instantly get a usb screen. If I could enter it i wouldn't have any problems. Bootloader is locked, when i start up my phone the asus splash screen is black, not white.
IchiBan360 said:
Well that's the thing, i can't do both ways, cause holding power+volume up buttons i instantly get a usb screen. If I could enter it i wouldn't have any problems. Bootloader is locked, when i start up my phone the asus splash screen is black, not white.
Click to expand...
Click to collapse
one thing did you use xFSTK to recover your device recently? what is your model number? send me you device serial number. do not use xFSTK you may brick completely. after boot check with root checker app from app store if you are rooted. as you stated found su binary on device. and revert me back

Categories

Resources