Guys, the LED Notification works perfectly with MM use "MOTO LED ENABLER" App from Google Play Store
This App does not works with 7.XX and above right now.
https://play.google.com/store/apps/details?id=br.com.itsmeton.motoledenabler&hl=de
You can add all apps you like to get notification!
Need root?
yes, root needed.
Jerome-X said:
Guys, the LED Notification works perfectly with MM use "MOTO LED ENABLER" App from Google Play Store
This App does not works with 7.XX and above right now.
https://play.google.com/store/apps/details?id=br.com.itsmeton.motoledenabler&hl=de
You can add all apps you like to get notification!
Click to expand...
Click to collapse
Hi!, The MOTO LED ENABLER app is unstable. It has problem when reboot the cellphone.
I prefer the Light Flow Legacy app, it's much better, but the configuration is a little bit difficult...
Sai_D said:
Hey,
After a little experimentation, I found that you can use the Light Flow Legacy app to control the led. (https://play.google.com/store/apps/details?id=com.rageconsulting.android.lightflowlegacy&hl=en)
Once you've installed it, you must give notification access.
Go to menu > settings > Device Settings and Root > check "root mode" and "run every command as root". (***)
Then go to menu > settings > LED control > Additional LEDs found > check "charging control"
Now, go to menu > notification settings > click the 3-dot menu on any of the items in the list > settings
In the next screen, swipe right to find a tab called Light. Find charging LED and click on it. You'll have an option of turning it "solid".
You also have an option to set its brightness, but that setting didn't change the led's brightness.
On the top right corner, you have an option called "Test". Click on that and switch off your display.
You should see the charging led light up.
Cheers.
Click to expand...
Click to collapse
(***) and "Direct mode" too
Related
Anyone aware of anyway either via root or 3rd party app on how to change the strength of a notification vibration?
Coming from a pebble which literally shook your wrist when it vibrated, the vibration on the SW3 just seems so weak!
Looking at this http://forum.xda-developers.com/g-watch/orig-development/rom-graphene-rom-preview-t2888758
he changes some sysfs values:
Code:
# increase vibration intensity
echo 50 > /sys/class/timed_output/vibrator/amp
echo 115 > /sys/class/timed_output/vibrator/driving_ms
I don't have my SW3 yet so can't try myself. Maybe root is required.
I agree completely! This thing is dead compared to the pebble! Would I run those commands from ADB? Would I just put the value I want on the end?
nobunnysapro said:
Would I run those commands from ADB?
Click to expand...
Click to collapse
adb shell
nobunnysapro said:
Would I just put the value I want on the end?
Click to expand...
Click to collapse
the number just behind echo is the value.
Note: changes you do this way don't survive a reboot.
Aww but thank you!
not what you ask for but.....
I went to settings > about > enabled developer options > dev options .> pressed on manufacture menu-launcher >Vibrator > enter duration> changed to 500 ms
I tested and it vibrated longer than usual but the settings didn't stick.
anyone?
not what you ask for but.....
I went to settings > about > enabled developer options > dev options .> pressed on manufacture menu-launcher >Vibrator > enter duration> changed to 500 ms
I tested and it vibrated longer than usual but the settings didn't stick.
anyone?
error629 said:
I went to settings > about > enabled developer options > dev options .> pressed on manufacture menu-launcher >Vibrator > enter duration> changed to 500 ms
I tested and it vibrated longer than usual but the settings didn't stick.
anyone?
Click to expand...
Click to collapse
Those settings are only to test if sensors are working. They are not normal settings and will not stick...
Send with Tapatalk on Sony Z2
vibration
same problem... any of you have solution?
Also is good repeat vibration alert...same of augmented smartwatch application.
hev any idea?
claudio
Italy
Im also interested !!!
I'd like a solution as well.
This would be great.
Take it there is no solution as yet, totally agree vibrate is so weak it's almost useless.
Light flow added vibration control.
http://forum.xda-developers.com/moto-360/general/light-flow-supports-android-wear-t3022377
sirrelevant said:
Light flow added vibration control.
http://forum.xda-developers.com/moto-360/general/light-flow-supports-android-wear-t3022377
Click to expand...
Click to collapse
Thank you [emoji106]
You can also use "Vibration Notifier" it can add vibe for strenght you would and repeat one or more time 2s after the first original vibe.
+1 Light flow for me is the solution. Anyway, compared to the moto 360 this watch is an hammer drill!
sirrelevant said:
Light flow added vibration control.
http://forum.xda-developers.com/moto-360/general/light-flow-supports-android-wear-t3022377
Click to expand...
Click to collapse
this is dead already but i didnt like lightflow too much so ive been using "Feel the Wear" app for couple weeks now, and it works fine! made just for this ! so if you dont wanna bother paying or messing with your notifications and led, try this out ! https://play.google.com/store/apps/details?id=sk.martinflorek.wear.feelthewear&hl=en
Thanks!
old thread i can see, however i stumbled across it searching for the same thing, for me lightflow and feel the wear was not for me as you have to pay for both and are filled with too many extras that i dont actually want.
i found this one - free/easy to use and does the trick fine to change the vibration length which makes me feel the vibration and not miss notifications
https://play.google.com/store/apps/details?id=com.matejdro.wearvibrationcenter&hl=en
Great news for everyone with an X-Force, and everyone with a DT2 once it gets root.
Unlike previous Moto phones, we are able to get the notification "charging" led to fire for a notification of our choosing. Unfortunately, it appears to work a bit sporadically, I'd say only about 80% of the time.
Steps:
1. Download Light Flow from the Play Store
2. Enable Accessibility options when prompted
3. Open the Menu > Device Settings and Root
4. Enable Root Mode, Run Every Command as Root (I didnt alter anything else, but feel free to experiment)
5. Go to the LED Control menu
6. Enable charging control under the "Additional LEDs" section
Notification Configuration:
1. Go to Notification Settings
2. Select an appropriate notification & swype over to the "Light" section
3. At the bottom change "charging LED" to solid and "charging brightness" to 255
You are done
I have only been able to get green working, let me know if anyone gets things working a bit more consistent or with other colors and I will update the OP
You may contact dev of Light Flow to improve compatibility with Force/T2.
Hi , great job
How do I get the green?
I cant find where to activate or if it even have a notification light when charging or missing call, ect?
If some can point me in the right direction, thanks!!
kenifer said:
I cant find where to activate or if it even have a notification light when charging or missing call, ect?
If some can point me in the right direction, thanks!!
Click to expand...
Click to collapse
per a reddit thread
Settings > notifications > hit gear icon on top right > then hit pulse notification light
uploder said:
per a reddit thread
Settings > notifications > hit gear icon on top right > then hit pulse notification light
Click to expand...
Click to collapse
Yup! ^ Works good, the light is in the earpiece.
So just unpacked this badboy and been setting it up for the last hours, but I can't for the life of me find the option to disable the vibration on the on screen menu buttons? Am I blind or is it just missing?
[Solved]
Not possible, the options are greyed out for some reason (settings > sounds > other sounds).
Settings / system button / turn on or off vibration is at the bottom of the page ?
Sent from my Lenovo P2a42 using Tapatalk
Thanks
ruk21201 said:
Settings / system button / turn on or off vibration is at the bottom of the page
Sent from my Lenovo P2a42 using Tapatalk
Click to expand...
Click to collapse
That's one of the options I've been trying to toggle, the system buttons vibrate either way..
Not rooted yet.
razr96 said:
Not possible, the options are greyed out for some reason (settings > sounds > other sounds).
Click to expand...
Click to collapse
Actually this worked, it wasnt greyed out and I hadn't found it before, thanks!
Omg...this worked for me as well.
Hi friends,
I hope in your help
I have a Xiaomi redmi note pro from a few days
On my precedent device I used Always On Edge lighting app by playstore
the app need the permissions for the notification access
but I allow this but the app continue to ask me the notification access so this not work
I make so:
I open the app
I tap to put the flag on notification access
it open the page of settings
I disable xiaomi service framework
I enable AOE
I enable xiaomi service framework
I go back
I watch the video to save
It telled me save succesfull
but the app ask me again the notification access
can someone help me?
Late reply, but anyway;
You have to open up phone settings, scroll down to "further settings" (right below "apps"), scroll down to choose "accessibilty", open the "more downloaded services" option. Check that AOE is set to "on".
Anyway, I just can't make AOE work as it should. I get notifications to show up, but since the screen light up for 30 sec's and then fade out to off, the notification also disappear. For instance, since screen always lights up on incoming calls, the notification disappears as soon as the screen goes black.
Anyone could help? I'm out of ideas....