Help, please!! Problem getting in my google account when i flash a custom rom - Lenovo Vibe K5 Plus Questions & Answers

GOOGLE PLAY STUCKS AT "CHECKING INFO" AFTER INSTALLING ANY CUSTOM ROM
Hi, after I flash a custom rom (lineage os, aosp, aicp, DU, etc) in the TWRP recovery with gapps, when the phone is power on and in the first configuration it says to put a google account, it stucks at "checking info" I have tried to flash basket and dynamic gapps but it doesn´t work and it stucks at "cheching info".
Someone who can help me, please
Tomagent

Go back 1 step when the checking screen appears, then click next again.. If it doesn't work then i don't know..
This worked for me

Skip the sigh in part and try again later.

Try over wi-fi or use another mobile carrier

Related

[Q] After rom install (system problem)

guys help me out after i have competed my rom installation and now i am on the front page of the start up. they ask me to select the language(i selected english) after selecting and eveythig half way throught the setup it keep on pop out wizard fail.pls help me urgent
aaron.ngiam said:
guys help me out after i have competed my rom installation and now i am on the front page of the start up. they ask me to select the language(i selected english) after selecting and eveythig half way throught the setup it keep on pop out wizard fail.pls help me urgent
Click to expand...
Click to collapse
If you can use your phone normally after it, it doesnt matter. You can change everything from the settings. But if you keep getting popup window, try to flash rom again, from recovery. If it doesnt work, download rom again and flash it.
problem still occur
BluntP6 said:
If you can use your phone normally after it, it doesnt matter. You can change everything from the settings. But if you keep getting popup window, try to flash rom again, from recovery. If it doesnt work, download rom again and flash it.
Click to expand...
Click to collapse
after from the main language setup half way, the follow will pop out 'Unfortunately, setup wizard has stopped'
you ask me to try flash rom again, how am i suppose to go to recovery mode went i can even go throught basic setup up page.
download rom again and flash it- do you mean download the rom in to my sd/Card and open revovery mode 'power + volume key'
and boot from sd card. pls guide me here
phone still cannot on ....T.T
I'm facing the same problem any solution?

Download unsucessful. Help

I'm a noob and trying to figure out what's going on. I tried flashing the bliss pop rom thru twrp. I got to the rom successfully but didn't get the gapps for some reason. I decided to restore my tablet back to original 5.0.2 lollipop. Ever since I restored back to lollipop, I cannot download any custom roms. I start to get the "download arrow" at the top of my screen, then an "x" shows up and says download unsucessful. Please help.

S4 Mini GT-i9195i crashes after recovery - (how to reinstall stock ROM)

Hi,
I have Galaxy S4 Mini VE GT-i9195i. The phone was a bit laggy, so I decided to factory reset. When I did it, the phone didn't booted. It was showing Odin download screen with red text "Could not do normal boot, odin mode" (or something like that). In thread [index] Galaxy S4 mini i9195i were some recoveries, so I used odin to recovery it. Now, when booting, it shows "Kernel is not seandroid reinforcing, set warranty bit:kernel" and when it boots up, there is setup screen (the one which shows when you firt turn the phone on), but the phone is spamming with message boxes "<random process or app> stopped working", so I can't do anything(by fast taping OK, I manage to get through few screens, but when it come's Google account choose, the screen goes black).
I tried another recovery, but none of them worked.
In the forum, there is also link to stock ROM, I think wiping all the data and flashing the phone with stock ROM could help, but last time I did something like this was about 5 years ago with Xperia, and I couldn't find any guide how to do this, so could you guys please tell me what to do?
Thanks.
adamjezek98 said:
Hi,
I have Galaxy S4 Mini VE GT-i9195i. The phone was a bit laggy, so I decided to factory reset. When I did it, the phone didn't booted. It was showing Odin download screen with red text "Could not do normal boot, odin mode" (or something like that). In thread [index] Galaxy S4 mini i9195i were some recoveries, so I used odin to recovery it. Now, when booting, it shows "Kernel is not seandroid reinforcing, set warranty bit:kernel" and when it boots up, there is setup screen (the one which shows when you firt turn the phone on), but the phone is spamming with message boxes "<random process or app> stopped working", so I can't do anything(by fast taping OK, I manage to get through few screens, but when it come's Google account choose, the screen goes black).
I tried another recovery, but none of them worked.
In the forum, there is also link to stock ROM, I think wiping all the data and flashing the phone with stock ROM could help, but last time I did something like this was about 5 years ago with Xperia, and I couldn't find any guide how to do this, so could you guys please tell me what to do?
Thanks.
Click to expand...
Click to collapse
Sorry to hear about your situation. I think flashing the stock rom is the last best option. Anyways here r the steps:
1. Download Odin 3.1x.x version( its the program via which you can flash samsung stock roms, modems,recoveries and caches etc,...google it)
2.If possible, before doing anything to your phone, take a nandroid backup from recovery like TWRP or CWM)
3.Hold power+home+volume down button to boot into bootloader menu. Once booted, it will ask you to press volume up button to continue, do that.
4.Now connect your phone to your pc via data cable( kindly confirm that your pc usb ports are working properly otherwise the flashing will corrupt)
5. Open Odin. If connected properly, you will see the ID:COM tab turn blue mentioning the port name you connected.Now click AP on right hand side and search /select the location where your Stock rom(md5) file is located. Now on left side panel(logs) you will see something is going on. Wait for a few minitues and after processing is done (when you see the lines "leave cs...") Click start and relax.
6.It will take some time to flash the rom. If everything went well, there will be a "PASS" message on top left of Odin. The phone will boot into recovery and do some cleaning and reboot again.......................................................Congratulations!!
Note: I follow this method on GT-9192 and i think its same with your model.
I think the message "Kernel is not seandroid reinforcing" means incompatible recovery software for this device. Try different one.
The only working recovery for our phone is TWRP recovery. Flash the .img through flashify after rooting with Kingroot / Supersu me and you are done . Be sure to flash the stock rom through odin to fix any hiccups with app not responding and after proceed normally.

UNABLE TO BOOT ANY ROM AFTER LATEST GApps INSTALLATION

Hi people,
Today I unlocked my Lenovo ZUK Z2 Plus and installed latest twrp recovery 3.3.1 successfully(no errors until now, butter smooth). After that I flashed "CARBON-CR-7.0-OPAL-RELEASE-z2_plus-20200122-0608" without installing GApps. This time the ROM booted successfully. I was able to use the phone and make calls.
Then I installed the GApps " open_gapps-arm64-9.0-stock-20200131.zip" downloaded from OpenGApps.org. This time around, when I booted after installing GApps, the phone showed the welcome screen, but got suddenly turned off. After that the phone just shows ZUK logo and keeps rebooting.
To fix this, I went to recovery again, wiped clean DATA & DALVIK CACHE & CACHE & SYSTEM & VENDOR partitions, hoping I would start from the beginning and again install only ROM and not GApps and hoping I would be able to use the phone.
Now this time around, even though I wiped every partition that TWRP shows, the phone just kept rebooting without starting Android OS. So I cleaned again everything using TWRP(cleaning DATA procedure) and then transferred ROM zip files to phone and again flashed only ROM. Still the phone kept rebooting.
Now I got pissed off. I flashed factory ROM using QFIL method. This time after the boot animation it went straight to "Shutting Down" dialogue and again the phone restarted.
CAN SOMEBODY TELL ME WHAT THE HELL IS EXACTLY WRONG WITH MY PHONE?
WHAT COULD HAVE GONE WRONG THAT EVEN AFTER CLEANING ALL THE PARTITIONS AND FLASHING USING THE FACTORY PROCEDURE, THE PHONE STILL KEEPS REBOOTING?
Is there any other partition that needs to be cleared(which the TWRP does not list)?
Can somebody just tell me how to get out of this?
(Please explain the steps and the reason for each, as I am a noob in this matter).
WAITING FOR ANYBODY'S PROMPT RESPONSE AS MY PHONE IS COMPLETELY UNUSABLE. THANKS IN ADVANCE.
what ZUI version you flashed with QFIL ?
AndroidUser5 said:
Hi people,
Today I unlocked my Lenovo ZUK Z2 Plus and installed latest twrp recovery 3.3.1 successfully(no errors until now, butter smooth). After that I flashed "CARBON-CR-7.0-OPAL-RELEASE-z2_plus-20200122-0608" without installing GApps. This time the ROM booted successfully. I was able to use the phone and make calls.
Then I installed the GApps " open_gapps-arm64-9.0-stock-20200131.zip" downloaded from OpenGApps.org. This time around, when I booted after installing GApps, the phone showed the welcome screen, but got suddenly turned off. After that the phone just shows ZUK logo and keeps rebooting.
To fix this, I went to recovery again, wiped clean DATA & DALVIK CACHE & CACHE & SYSTEM & VENDOR partitions, hoping I would start from the beginning and again install only ROM and not GApps and hoping I would be able to use the phone.
Now this time around, even though I wiped every partition that TWRP shows, the phone just kept rebooting without starting Android OS. So I cleaned again everything using TWRP(cleaning DATA procedure) and then transferred ROM zip files to phone and again flashed only ROM. Still the phone kept rebooting.
Now I got pissed off. I flashed factory ROM using QFIL method. This time after the boot animation it went straight to "Shutting Down" dialogue and again the phone restarted.
CAN SOMEBODY TELL ME WHAT THE HELL IS EXACTLY WRONG WITH MY PHONE?
WHAT COULD HAVE GONE WRONG THAT EVEN AFTER CLEANING ALL THE PARTITIONS AND FLASHING USING THE FACTORY PROCEDURE, THE PHONE STILL KEEPS REBOOTING?
Is there any other partition that needs to be cleared(which the TWRP does not list)?
Can somebody just tell me how to get out of this?
(Please explain the steps and the reason for each, as I am a noob in this matter).
WAITING FOR ANYBODY'S PROMPT RESPONSE AS MY PHONE IS COMPLETELY UNUSABLE. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Greetings buddy,
For my interest, i would like to know that the carbon rom u flashed was based on Android 9 or Android 10????
arielcasari said:
what ZUI version you flashed with QFIL ?
Click to expand...
Click to collapse
zui 2.5 st which is meant for indian users.
Naresh Rawat said:
Greetings buddy,
For my interest, i would like to know that the carbon rom u flashed was based on Android 9 or Android 10????
Click to expand...
Click to collapse
android 9.0.
what could be the problem... what do you think?
AndroidUser5 said:
android 9.0.
what could be the problem... what do you think?
Click to expand...
Click to collapse
I m at job so i reply late. No offense please ???
Ok plz let me know that if ur device boots up to fastboot mode. If yes then repeat the whole process but this time try installing different twrp. U can also use (https://www.androidfilehost.com/?a=show&w=files&flid=38683) tool kit for flashing. (DO NOT TRY TO RELOCK BOOTLOADER USING THIS TOOL) Also use flame gapps.
Will catch u soon regarding ur issue.
Peace out n TY???
Naresh Rawat said:
I m at job so i reply late. No offense please
Ok plz let me know that if ur device boots up to fastboot mode. If yes then repeat the whole process but this time try installing different twrp. U can also use (https://www.androidfilehost.com/?a=show&w=files&flid=38683) tool kit for flashing. (DO NOT TRY TO RELOCK BOOTLOADER USING THIS TOOL) Also use flame gapps.
Will catch u soon regarding ur issue.
Peace out n TY
Click to expand...
Click to collapse
i have already tried using twrp 3.2, but no luck. I will try flame gapps and will let you know. i will try this coming saturday.
Dhanyavad.
Naresh Rawat said:
I m at job so i reply late. No offense please
Ok plz let me know that if ur device boots up to fastboot mode. If yes then repeat the whole process but this time try installing different twrp. U can also use (https://www.androidfilehost.com/?a=show&w=files&flid=38683) tool kit for flashing. (DO NOT TRY TO RELOCK BOOTLOADER USING THIS TOOL) Also use flame gapps.
Will catch u soon regarding ur issue.
Peace out n TY
Click to expand...
Click to collapse
I again flashed the Stock ZUI 2.5. ST ROM using QFIL. But before doing this I had moved the SIM Card to another fone, so this fone was without any connection. This time the fone booted up successfully. Then I reflashed the Carbon ROM mentioned before and flashed Flame GApps Basic edition as suggested by you. This time the fone booted up successfully. But as soon as I connected the fone to internet, it downloaded something from Google Play Services in the background and again it started the same problem.
SO BASICALLY WHEN IT DOWNLOADS SOMETHING FROM GOOGLE IN BACKGROUND, IT STARTS THE REBOOTING NONSENSE.
I searched the internet for this and some articles on the internet suggested that "Google Dialer" component is causing reboot. Those articles suggested that if the "Google Dialer" is not set as the default dialer, it reboots. BUT HOW TO SET IT AS DEFAULT, WHEN IT STARTS REBOOTING IMMEDIATELY AND IT DOES NOT GIVE ENOUGH TIME?
EVEN THE EARLIER GApps 9.0 stock package that I flashed had warned to set the "Google Dialer" as default, but upon boot up it kept rebooting.
Even initially I started this UNLOCKING AND CUSTOM ROM FLASHING exercise after the factory ROM started rebooting after updating "Google play services".
So this seems to me an issue from Google.
Has Google done this on purpose to make people switch older phones to new ones?(Because I own a total of 3 android devices and only this device is rebooting not the other ones).
Looking forward to your reply.
Greetings Buddy..how's life going??
Ok once again I hv read ur op regarding ur problems. Let's start from the beginning. Boot up to twrp and format the data first before wiping everything. Try flashing lineageOS 16 using official gapps. (Flash gapps along with the flashing ROM, same time. Because flashing gapps after ROM's 1st reboot may result synchronise error or sometime bootloop). If successful, then flash ur carbon ROM and see whether it boots up to normal or still gives such error.
BTW sorry for my late replies. Till then peace out
Naresh Rawat said:
Greetings Buddy..how's life going??
Ok once again I hv read ur op regarding ur problems. Let's start from the beginning. Boot up to twrp and format the data first before wiping everything. Try flashing lineageOS 16 using official gapps. (Flash gapps along with the flashing ROM, same time. Because flashing gapps after ROM's 1st reboot may result synchronise error or sometime bootloop). If successful, then flash ur carbon ROM and see whether it boots up to normal or still gives such error.
BTW sorry for my late replies. Till then peace out
Click to expand...
Click to collapse
I am now not able to boot any ROM. Just keeps rebooting after the ZUK splashscreen. Hence, I again reflashed the Recovery properly, using the procedure as before. Now I am not able to boot into the recivery, too.

Problem in updating my MIUI version

I'm currently having an issue with my phone regarding it's update status. I currently have Redmi 5A, MIUI Global 9.1|Stable 9.1.4.0 (NCKMIEI)
I already downloaded one of the custom ROM flash recovery which is miui_HM5AGlobal_V9.1.8.0.NCKMIEI_7249a98fc5_7.1.zip
every time i use my phone updater, where i choose update package, nothing goes wrong. In fact it says it's decrypting the file. But when it comes to booting up to install the new MIUI version, that's when it gets bumpy. My phone usually boot itself for one time only, but in terms of updating, it boots up two times. The first boot will show the logo, but the android and the loading sign wouldn't pop up, it would boot again, and this time, it will show the logo, the android, and the loading sign. And when i check my phone, if it's updated, it isn't. Which makes me feel a littlr frustrated. Can anyone help me? I would appraciate it. Thanks in advance

Categories

Resources