Related
My gnex is not charging..i plug in and the battery symbol doesnt show charging..when i check battery in settings it shows not charging instead of discharging.
Another thing is that if i switch it off and plug in the white charging symbol occurs but after an hour when i switch on the battery is at the same percentage..
pls help :'(
Ive had those same issues..I went to charge it on my car charger and it instantly began working. The very next day I tried my hone charger again and it would work..Crazy thing is when the home charger wasn't working for my GNEX, it would charge my girlfriends phone just fine!!
Sent from my Galaxy Nexus using xda app-developers app
tea_dub84 said:
Ive had those same issues..I went to charge it on my car charger and it instantly began working. The very next day I tried my hone charger again and it would work..Crazy thing is when the home charger wasn't working for my GNEX, it would charge my girlfriends phone just fine!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
http://productforums.google.com/forum/#!topic/mobile/RahZtFg39DU[1-25]
looks like many have this issue
Same happened with my friends nexus.. Any solutions...?
vjz567 said:
Same happened with my friends nexus.. Any solutions...?
Click to expand...
Click to collapse
no idea..this issue is very annoying
There's a goddamn thread a day on this
Not kidding. One day Galaxy Nexuses will go extinct because of this!
Sent from my Galaxy Nexus using xda app-developers app
Have had a charging issue as well, and solved it.
Hey there,
my SGN was not charging at all not even when turned off, started two days ago, the first evening it was only charging on one out of my three USB cables (each cable has its own wall charger).
Also my PC with "Win 8 Pro" was not recognizing my phone at all.
My first try was a bit stupid, but it worked, well for one day only. I bite on the USB cable, so the part that goes in the phone was a bit deformed, and the SGN was charging again. \o/
Next evening, I had the same problem again, but this time, non of my three cables was able to charge, even after further deforming tries.
My final solution was to use a needle, stick it in the USB port on the phone and bend the small "tongue" a bit up, so it was exactly in the middle.
My Phone was off and the battery removed. I put all together again and plugged the USB cable back in, it started charging while off.
Then I just turned it on, after booting was almost done, my PC told me that my SGN is connected and it was still charging.
I removed the cable, plugged it back in, several times, also on all three charger with its cables, finally my problem seems to be resolved.
btw. My SGN is from November 2011, so one of the first here in Europe.
I hope this can help some other with the same problem.
Kind Regards from Germany,
Milex84
MiLeX84 said:
Hey there,
my SGN was not charging at all not even when turned off, started two days ago, the first evening it was only charging on one out of my three USB cables (each cable has its own wall charger).
Also my PC with "Win 8 Pro" was not recognizing my phone at all.
My first try was a bit stupid, but it worked, well for one day only. I bite on the USB cable, so the part that goes in the phone was a bit deformed, and the SGN was charging again. \o/
Next evening, I had the same problem again, but this time, non of my three cables was able to charge, even after further deforming tries.
My final solution was to use a needle, stick it in the USB port on the phone and bend the small "tongue" a bit up, so it was exactly in the middle.
My Phone was off and the battery removed. I put all together again and plugged the USB cable back in, it started charging while off.
Then I just turned it on, after booting was almost done, my PC told me that my SGN is connected and it was still charging.
I removed the cable, plugged it back in, several times, also on all three charger with its cables, finally my problem seems to be resolved.
btw. My SGN is from November 2011, so one of the first here in Europe.
I hope this can help some other with the same problem.
Kind Regards from Germany,
Milex84
Click to expand...
Click to collapse
could u please post a photo of what u did? I've the same problem
Thanks
MiLeX84 said:
Hey there,
My final solution was to use a needle, stick it in the USB port on the phone and bend the small "tongue" a bit up, so it was exactly in the middle.
Kind Regards from Germany,
Milex84
Click to expand...
Click to collapse
I had the same problem, GNex quit charging. Fixed it by using a toothpick to gently move the "tongue" in the USB port up towards the LED (screen side). I used a wooden toothpick as I didn't know what would happen if the connectors shorted using something metal.
Apparently, moving the USB plug around when it is in the port can move things out of alignment. Very easy fix, takes less than one minute. You could use a plastic pen cap or whatever you have lying around as a tool.
If you are under warranty, you could always ask for a replacement.
I had this problem a while back, first only some chargers would work and finally none of my chargers worked. In my case it seems like the problem was pocket lint tightly packed at the back of the usb port. The lint was grey and so tightly packed that I couldn't see any thing wrong. I used a fine tooth pick and got a good size wad out and the charging problem was solved. I always thought that the lint prevented the usb cable to be fully seated but maybe I bent the "lip" while trying to get the lint out
Sent from my Galaxy Nexus using Tapatalk 2
Well, I've left my phone on charge with the adapter charger and it was recharged. Now it seems to work also through usb
I got a new Gnex today because of this same issue. It would randomly not charge no matter what charger is was using. What's weird though is I never had an issue transferring files to my Mac and vice versa.
Sent from my Galaxy Nexus using Tapatalk 2
Jolle_1 said:
I had this problem a while back, first only some chargers would work and finally none of my chargers worked. In my case it seems like the problem was pocket lint tightly packed at the back of the usb port. The lint was grey and so tightly packed that I couldn't see any thing wrong.
Click to expand...
Click to collapse
had the same issue, was charging only on PC-USB, I used a safety pin and removed a lot of lint. Works fine now.
britoso said:
had the same issue, was charging only on PC-USB, I used a safety pin and removed a lot of lint. Works fine now.
Click to expand...
Click to collapse
Thought that was lint but in my case even removing the lint it wont charge CORRECTLY -- with the original charger (it was uncharging after some movement).
Then I realize that forcing the usb plug to go more inside the USB port it works. What I did: Removed the black protection because it block the plug to go more inside the phone port. It's now metalic (lol) but not a problem of charging anymore.
I'd buy some heat shrink tubing for that before you cause a fire .
Sent from my Galaxy Nexus using Tapatalk 2
Sometimes it happens to me when battery's charged at 98-99%. Don't know the reason, and what I can do is to remove cable, reconnect it
dbleti said:
Sometimes it happens to me when battery's charged at 98-99%. Don't know the reason, and what I can do is to remove cable, reconnect it
Click to expand...
Click to collapse
Unfortunately, all that really does is shorten the battery's life. There is no benefit to forcing it to that feel good display of 100%.
Sent from my Galaxy Nexus using Tapatalk 2
Here's my full experience with my Galaxy Nexus charging problem --
I bought this one eBay, came with 4.1.2. Didn't even test charging before I updated it to stock 4.2.2 and rooted it, so I'm not sure if the problem developed after my software update, or if it always had that problem. The eBayer said he didn't know anything about it. I'm on stock rooted 4.3 now, and the problem persists.
The phone has never charged on any of the several AC adapters I've tried. These have been between 250ma and 1A, and they wouldn't work whether the phone was on or off. It would consistently charge when connected to my desktop computer, but that all changed a few weeks ago when I changed out my computer's power supply. Now, the only one trick I've found is to turn on WiFi, BT, GPS, and put the screen at 100% brightness, then plug connect my computer's USB cable, and it will go into charging mode about 35-50% of the time. This works OK, but one extra annoying bit is that when the battery reaches 100%, it stops charging, and won't start again until I do my little trick and replug the USB.
I tried replacing the USB port, but that didn't fix anything. As far as I can tell, that's the only part that can be easily replaced by a normal person. I'm basically managing this by swapping in batteries charged by an external charger.
Got major issue all of sudden and phone won't start anymore
I have been tweaking with my phone customizing it for like one year and didn't had any problem. I flashed with KitKat gummy ROM and then reverted back to 4.3 stock jellybean using ROM manager installed previous saved 4.3 stock rooted ROM.
Further installed clean master and did some advanced cleaning of cache files. WELL after reverting back I started witnessing some major flaws with battery charging status earlier with KitKat I wasn't using any battery saver app but after reverting back to 4.3 I installed DU battery saver and it would like take ages to charge my battery like 7-8 hrs but I wasn't paying much attention to this. I did some advanced cleaning with clean master, but anyways that won't clean any system files that would hinder the functionality of phone right?Problem started cropping up as I detached my power cable without switching off the supply ( even though I had done this previously many times before) , phone flickered/froze and switched off and won't start without external power supply even though i had 57% battery charge that too showed random status, sometimes 0% and sometimes 50+ %. This went looping for sometime then like it won't switch on even with power supply, just showing for a sec the battery symbol with bolt sign when the charging cable is inserted and going blank within 5 sec . It would show the battery icon sometimes and sometimes no sign just plain blank..
Well I tried different ways as suggested like pushing the small tongue inside USB to middle or attaching to laptop w/o battery and putting back n starting but all in vain, no response.
I am not sure any major fault has cropped in the charging circuit or is the phone bricked? Battery dead?
Guys do give some suggestions.. I have been charging using diff usb cables, no response but just that battery symbol for 5sec n going blank..even though i have been charging the phone is getting heated..but does that imply anything?
do provide some insights guys
Thanks in advance!
Once it worked and now not working
MiLeX84 said:
Hey there,
my SGN was not charging at all not even when turned off, started two days ago, the first evening it was only charging on one out of my three USB cables (each cable has its own wall charger).
Also my PC with "Win 8 Pro" was not recognizing my phone at all.
My first try was a bit stupid, but it worked, well for one day only. I bite on the USB cable, so the part that goes in the phone was a bit deformed, and the SGN was charging again. \o/
Next evening, I had the same problem again, but this time, non of my three cables was able to charge, even after further deforming tries.
My final solution was to use a needle, stick it in the USB port on the phone and bend the small "tongue" a bit up, so it was exactly in the middle.
My Phone was off and the battery removed. I put all together again and plugged the USB cable back in, it started charging while off.
Then I just turned it on, after booting was almost done, my PC told me that my SGN is connected and it was still charging.
I removed the cable, plugged it back in, several times, also on all three charger with its cables, finally my problem seems to be resolved.
btw. My SGN is from November 2011, so one of the first here in Europe.
I hope this can help some other with the same problem.
Kind Regards from Germany,
Milex84
Click to expand...
Click to collapse
Thanks for the awesome solution. It worked for me before a week. I faced the same problem and now this trick is not working for me ;(. Please help me out.
Hey Guys,
Over the last year or so I've had intermittent charging issues with my Galaxy Nexus. About 4 months ago is when it first started happening, the phone would either not charge or only charge when it is turned off. Somehow the issue was resolved through tons of troubleshooting, I'm not even sure what fixed it or why it started working again.
Same thing happened about 2 weeks ago, except this time it won't charge at all. Then 2 days later all of a sudden started charging again. Now it's happening again today, I have no idea what is going on or why this handset won't charge properly. The phone won't turn on with just the charger in and the battery out either.
I've tried various chargers including the OEM charger, I've tried up to 6 different chargers and 7 seperate micro-USB B cords. Nothing. I've tried a brand new battery that a friend bought for his phone before he threw it in and no results.
At this point I think it's the USB charger board, however I'm not sure why it would not work and then work again. Does anyone have any ideas or any solutions? I've read thousands of threads on this, from this forum and many others and have gone through some ridiculous troubleshooting methods.
SCH-I515 Korean Version.
Seriously, anyhelp is appreciated.
As of now, all of a sudden it will charge while it's off. But only to about 4% then it just stops charging. It will not charge while it is on at all.
Because it's getting worse and worse?
Relock bootloader, and return it in for warranty, if you can. I'm afraid there's not much help if you already checked for damage to the USB port.
sent from my Google Galaxy Nexus
hi
had the same problem until a few minutes ago.
received my usb/charging flex part today and changed it just before to post here.
took me like 20 min, really easy to do, everything works perfectly and i also took time to clean up a bit the phone inside of some dirts and change the housing i bought with the flex part.
As my screen is under protection since the beginning (4 months old), and that i recently bought a 2000mah battery, well i have to say that i have a new phone ready to handle the new year easily!
operation is easy and you will find plenty of videos on youtube showing how to change the usb flex (7€/$ , +/-) so pretty cheap.
Good luck
Why not buy an external battery charger and a spare battery?
Sent from my Galaxy Nexus using xda app-developers app
I'd get a replacement daughterboard and switch it out yourself. It's easy dude, just like a previous poster already said. I just did it myself, took me all of 20 minutes and cost me $10. ifixit.com has a step by step direction sheet, if you have any questions feel free to contact me about it.
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
farshad525hou said:
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
Click to expand...
Click to collapse
i dont know why, but this fixed it for me, for a short while. now the charging is intermittent and seems to come and go as it pleases.
Hi,
I had the same problem of ghost charging, it started with phone not charging when connected to charger and then randomly showing charging...
Now discovered it causes vbus_tuna_otg wake lock, resulting in high system usage in settings> battery and not letting phone go to deep sleep, causing battery drain.
Sent from my Galaxy Nexus using Tapatalk 2
Same Problem
I've come into the same problem with my Galaxy Nexus as well. If my phone is turned on, my phone will recognize that a charger is plugged in but the battery will not charge at all. If the phone is off and plugged in, the charging screen won't appear. I've tried multiple chargers and cords, 2 different batteries, and even replaced the micro usb and board, but the problem hasn't changed at all. I've managed to charge my batteries with an external charger but would like to get my phone back to normal working condition. Does anyone think that changing the actual motherboard itself might solve the problem?
Sayword said:
I've come into the same problem with my Galaxy Nexus as well. If my phone is turned on, my phone will recognize that a charger is plugged in but the battery will not charge at all. If the phone is off and plugged in, the charging screen won't appear. I've tried multiple chargers and cords, 2 different batteries, and even replaced the micro usb and board, but the problem hasn't changed at all. I've managed to charge my batteries with an external charger but would like to get my phone back to normal working condition. Does anyone think that changing the actual motherboard itself might solve the problem?
Click to expand...
Click to collapse
I had this problem before, using something small and flat to push the charging connector off the housing will work for awhile. The pin in the charging port is bent down and is very thin it's easy to lift up just use a tiny bit of force to lift it up. The pin touching the housing is causing a short and that is causing your no charge while it's on and mine even went as far as draining my battery very quickly. I did research and found alot of people having this issue on the gnex. I eventually had to turn mine in for replacement, no problems since. Hopefully yours is still under warranty or you can buy the peice that is broken and replace yourself, there is a post above saying what to do for that.
Looks like my phone developed this problem. It sometimes won't charge be it via my pogo dock or USB cord. It seems to start taking a charge after I pop out the battery and then put it back in. I'm going to order another battery and see if that is the problem.
Thank yoiu!!
solved my problem!! I am in your debt
popping the battery out just worked for me too
hlaalu said:
Looks like my phone developed this problem. It sometimes won't charge be it via my pogo dock or USB cord. It seems to start taking a charge after I pop out the battery and then put it back in. I'm going to order another battery and see if that is the problem.
Click to expand...
Click to collapse
I just did the remove battery trick as well and it worked. I just noticed my battery not charging yesterday but figured it was because I was trying to use a different charging in my dad's car. got to work where i left my normal charger and no luck.
thefayeride said:
I just did the remove battery trick as well and it worked. I just noticed my battery not charging yesterday but figured it was because I was trying to use a different charging in my dad's car. got to work where i left my normal charger and no luck.
Click to expand...
Click to collapse
That's good, I tried it a few times but the issue still pops up. To be fair though, I've had this phone and battery since launch day... Almost three years old. I ordered a new battery so hopefully I won't have the issue anymore... And I won't be surprised if my battery life is a little better too.
Sent from my Nexus 10 using Tapatalk 2
hlaalu said:
That's good, I tried it a few times but the issue still pops up. To be fair though, I've had this phone and battery since launch day... Almost three years old. I ordered a new battery so hopefully I won't have the issue anymore... And I won't be surprised if my battery life is a little better too.
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
The Galaxy Nexus is nowhere near three years old. Your phone would be 18 months old if you had it since launch.
Sent from my Nexus 7 using Tapatalk HD
Excuse me, two years. According to Samsung their lithium batteries have a life of about 500 cycles. So my point is still valid, my battery is probably just on it's way out. I'll find out for sure when my new one comes tomorrow.
Sent from my Nexus 10 using Tapatalk 2
Yeah, since battery life hasn't exactly been the strong point of the GN and some of us had to go though a complete cycle daily, I suspect a lot of folks are going to be seeing more and more issues. Not too long ago, I had a battery that failed in such a way that it would randomly crash the phone and had to be pulled in order to allow a reboot. I would've suspected anything but the battery in that case.
Sent from my SCH-I545 using Tapatalk 2
farshad525hou said:
Try the following:
1.) Turn off your phone.
2.) Get a flat head screwdriver (small one)
3.) Push the flat connector inside the microusb port up. (It often gets bent downwards because it's so thin compared to other phones...)
4.) Boot into the bootloader
5.) Hit volume down until restart bootloader appears. Press power button.
6.) Start phone manually.
Click to expand...
Click to collapse
This kind of worked for me, but the "boot into bootloader and restart it" killed my phone, don't know why. After a lot of a hassle i got it on, with 2% left, again not charging...tried to repush the connector towards the center and now i cant get my charger into the phone, maybe overbend it...what to do?...
I have a strange problem, my Gnex does not charge the battery, first i thought that it was the battery so, I tested the battery on other phone and it charged just fine, and then i ordered the usb/charging assemble from ebay and replaced on my gnex, and still not charging the battery, but when i connect the phone to the pc it recognize it immediately, but still won't charge the battery, anybody has an idea of what my problem is?? and how can i solve it?
Please help!!!
Recently successfully replaced the LCD screen on my Acer A100. Device worked fine for some time after that repair. Wanting to get a secondary charger for use at work I went to radio shack. Sales "tech" tried several different adapters, found one that fit inside he port, but wiggled. She plugged it in but device wasn't showing a charge. Decided to order one from online. At home the device still would not charge with its own charger. Thought maybe the charger was faulty. Ordered two more. Still the A100 turned off when charger plugged in. Figured tech had burned out the a/c port. Ordered and installed a new one. Still A100 turns off immediately when charger is plugged in. I have 3 chargers now - same results with all 3. Have now ordered a docking station to utilize (hopefully) charging ability through 40 pin connector.
If this connection creates same shut down am I looking at a battery replacement? AM sitting at 33% battery level now, device shut down completely.
Acer wants 199.00 prepaid to submit to them for repair - this is more than I paid for the device! Not really an expense I am willing to pay if all it needs is a battery. There is no erratic behavior , just immediate shutdown as soon as a charger is connected. Any ideas?
PocketFuzz said:
Recently successfully replaced the LCD screen on my Acer A100. Device worked fine for some time after that repair. Wanting to get a secondary charger for use at work I went to radio shack. Sales "tech" tried several different adapters, found one that fit inside he port, but wiggled. She plugged it in but device wasn't showing a charge. Decided to order one from online. At home the device still would not charge with its own charger. Thought maybe the charger was faulty. Ordered two more. Still the A100 turned off when charger plugged in. Figured tech had burned out the a/c port. Ordered and installed a new one. Still A100 turns off immediately when charger is plugged in. I have 3 chargers now - same results with all 3. Have now ordered a docking station to utilize (hopefully) charging ability through 40 pin connector.
If this connection creates same shut down am I looking at a battery replacement? AM sitting at 33% battery level now, device shut down completely.
Acer wants 199.00 prepaid to submit to them for repair - this is more than I paid for the device! Not really an expense I am willing to pay if all it needs is a battery. There is no erratic behavior , just immediate shutdown as soon as a charger is connected. Any ideas?
Click to expand...
Click to collapse
If its doing it on 3 chargers its sounding more like a board charging circuit issue. You could remove the battery and then see if it behaves normally, that'll be battery or board right there. Or if you have a multi meter test output at the battery connector.
Tapatalked from my HTC DNA - ReVolt
Tried connection without battery
pio_masaki said:
If its doing it on 3 chargers its sounding more like a board charging circuit issue. You could remove the battery and then see if it behaves normally, that'll be battery or board right there. Or if you have a multi meter test output at the battery connector.
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
Don't have a multi meter. Tried connection via new docking station, got same response: device immediately shut off. Tried your suggestion, disconnected battery connected to docking station, got immediate shut off. Same with charger via a/c port. :crying: Mainboard is out? But Device responds and acts normal when in battery mode - or is this isolated to the charging circuit part of the main board?
Thanks for the suggestion!
PocketFuzz said:
Don't have a multi meter. Tried connection via new docking station, got same response: device immediately shut off. Tried your suggestion, disconnected battery connected to docking station, got immediate shut off. Same with charger via a/c port. :crying: Mainboard is out? But Device responds and acts normal when in battery mode - or is this isolated to the charging circuit part of the main board?
Thanks for the suggestion!
Click to expand...
Click to collapse
Sounds like its tripping on the charger circuit and cutting out, like a breaker tripping. IMO look carefully for any shorts on the boards, even something stupid like dog hair can cause strange things to happen. A good blasting with air wouldn't hurt either. It could even be the dock port as it does charge from there and is subject to debris also.
Tapatalked from my HTC DNA - ReVolt
one more try
pio_masaki said:
Sounds like its tripping on the charger circuit and cutting out, like a breaker tripping. IMO look carefully for any shorts on the boards, even something stupid like dog hair can cause strange things to happen. A good blasting with air wouldn't hurt either. It could even be the dock port as it does charge from there and is subject to debris also.
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
Thanks again for more suggestions. Yup I have been over the board and all connections with a looking glass. Changed out the A/C dock port. My suspicion is that when the Radio Shack tech powered up the "Almost fits" adapter it blew whatever breaker the board has.
When I had it connected to the docking station with the battery disconnected, it powered on, then immediately shut off. So this definitely sounds like a "blown fuse". I completely disassembled and reassembled it again (except for the LCD screen) and checked all connections and plugs. Nothing visible to indicate a burnout or cross connection.
No odd smells either. Probably some teensy weensy transistor or resistor or something. I am not an electrician - just good at R & R.
Another visit to ebay and I am parting with 50 bucks for a "factory refurbished" motherboard. In the mean time, my beloved tablet will await further surgery. Will keep you posted. Board should be here by Saturday. I hope so - battery is down to 27%. Thanks again for weighing in!
PocketFuzz said:
Thanks again for more suggestions. Yup I have been over the board and all connections with a looking glass. Changed out the A/C dock port. My suspicion is that when the Radio Shack tech powered up the "Almost fits" adapter it blew whatever breaker the board has.
When I had it connected to the docking station with the battery disconnected, it powered on, then immediately shut off. So this definitely sounds like a "blown fuse". I completely disassembled and reassembled it again (except for the LCD screen) and checked all connections and plugs. Nothing visible to indicate a burnout or cross connection.
No odd smells either. Probably some teensy weensy transistor or resistor or something. I am not an electrician - just good at R & R.
Another visit to ebay and I am parting with 50 bucks for a "factory refurbished" motherboard. In the mean time, my beloved tablet will await further surgery. Will keep you posted. Board should be here by Saturday. I hope so - battery is down to 27%. Thanks again for weighing in!
Click to expand...
Click to collapse
To bad considering the crappy battery life so its not like you can charge some other way and swap the battery around.
Example, I have a bricked unit that charges but doesn't otherwise work, so I mean using my bricked board to charge it and the non charge board for use. The a100 isn't really a good setup for swapping around lol. I may actually be interested in that board now that I think about it...
Tapatalked from my HTC DNA - ReVolt
hmmm an idea for the brave
pio_masaki said:
To bad considering the crappy battery life so its not like you can charge some other way and swap the battery around.
Example, I have a bricked unit that charges but doesn't otherwise work, so I mean using my bricked board to charge it and the non charge board for use. The a100 isn't really a good setup for swapping around lol. I may actually be interested in that board now that I think about it...
Tapatalked from my HTC DNA - ReVolt
Click to expand...
Click to collapse
If I could figure out a way to charge the battery OTHER than through the board - I would! Which got me to thinking. One COULD get a second rear panel, cut a door in it, install teensy weensy hinges or create a hinge with cloth tape. then make some sort of extension cord for the battery charging cord, plug it in to the "external" charging board and refill the battery that way.
With a working board and the right know how, one could just extract the board, put it in a box and make a charger out of it too.
But that is just my brain rattling around ideas. :silly: Hopefully this new "refurbished" mother board will do the trick and I will learn my lesson and NEVER let a sales "tech" attempt trial adapters! at 10 minutes to 9pm tonight it was in Texas....
Until I CANNOT use it, I didn't realize how MUCH I used this little tablet!
now it blinks orange?
Oh fer cryin out loud! The motherboard has arrived, I have installed it. Can plug n the charger and drop it onto the docking station and now I get the same response for both charging options: Charge LED lights up orange solid for just about 60 seconds, then begins blinking. Device doesn't respond when power button is pushed UNLESS it is plugged in, and then it just sits at the "ACER" screen.led changes to blue.
OK, wait a minute, this is the third time I have turned it on while plugged in. Acer screen has moved to Android, Device has started. Battery icon showing a question mark. 23%
Turned off, turned back on, now battery shows only 3%????
Think I saw something on the forums about that. will go on a quest.
Finally charging again!
Shhh, don't want to disturb my device....
Found folks on other forums with similar issues of the Acer A100 tablet showing only 3% charge. I removed and inserted the charging pin several times, the device would show solid orange led for about one minute then start blinking. Turned the device on when charger plugged in, unlocked the screen, then with device still plugged in I shut it down completely. Removed charger. Plugged it back in and so far the led is staying at solid orange.
Please keep your fingers crossed for me! This has been quite the roller coaster ride of discovery. Will leave it be for overnight (what is left of the overnight). Then peek at it in the morning. With any luck at all it will have accepted a full charge and I will be greeted with a functioning device! I almost want to learn a new trade..
well now that is weird, got up this morning to a nice blue charge indicator. Yay! Unplugged charger, press on button, hold, hold, hold, hold, hold and device does not start up. Dang it! Plugged it back in, led went solid orange, then started blinking again! Pressed and held on button. Device came on. battery meter shows 3% and a question mark! HUH?
have device plugged in, settings of course show android version 3.2.1 for this motherboard. Guess I need to upgrade it to ICS maybe that will resolve this weird battery issue? Hope soemone here has ideas, feels like I am soooo close to resolving this.
I read the upper posts.
Now I want to share my experience regarding battery load sharing:
I have allso problems to charge the battery.
I have on my tab, for example, 40% of battery power.
I turn my tab off.
When i plugged the charging cable in it shows me the orange led for load.
After two hours or more i turned the tab on.
It shows me not more than 40% but only 37% or so.
So not loaded. This was a bad sign....
I dont no was happend.
I get a little bit nervous but when the tab not get power it doesnt work....
After two/three hours the battery was empty.
Now i can only start my tab while plugged the charging cabel in because the battery will not load.
I have tried several options to find a solution (disconnect the battery, install a new battery, etc. ....).
My solution was fairly straightforward:
I open the tab. Look where the power comes in.
Of the charging socket go four (two red and two black) cable to the motherboard and from the motherboard it goes seven (two red, two black and for me not so important three other coloured cabels) to the battery.
I organized four thin wire and soldered it from the charging socket directly to the battery (of course red to red black to black ).
The result:
When i plugged the charging cabel in while android is running i get no information to load and it shows me not to.
But when i turned the tab off and on again it shows me that it has the battery charged :fingers-crossed: .
After on night while the charger plugged in the battery is fully loaded!!
And of course i get the information in android the discharging of the battery but this is an normaly thing!
So, the problem to load the battery for me is solved .
I hope it helps a little bit for everyone!
frischeis said:
I read the upper posts.
Now I want to share my experience regarding battery load sharing:
I have allso problems to charge the battery.
I have on my tab, for example, 40% of battery power.
I turn my tab off.
When i plugged the charging cable in it shows me the orange led for load.
After two hours or more i turned the tab on.
It shows me not more than 40% but only 37% or so.
So not loaded. This was a bad sign....
I dont no was happend.
I get a little bit nervous but when the tab not get power it doesnt work....
After two/three hours the battery was empty.
Now i can only start my tab while plugged the charging cabel in because the battery will not load.
I have tried several options to find a solution (disconnect the battery, install a new battery, etc. ....).
My solution was fairly straightforward:
I open the tab. Look where the power comes in.
Of the charging socket go four (two red and two black) cable to the motherboard and from the motherboard it goes seven (two red, two black and for me not so important three other coloured cabels) to the battery.
I organized four thin wire and soldered it from the charging socket directly to the battery (of course red to red black to black ).
The result:
When i plugged the charging cabel in while android is running i get no information to load and it shows me not to.
But when i turned the tab off and on again it shows me that it has the battery charged :fingers-crossed: .
After on night while the charger plugged in the battery is fully loaded!!
And of course i get the information in android the discharging of the battery but this is an normaly thing!
So, the problem to load the battery for me is solved .
I hope it helps a little bit for everyone!
Click to expand...
Click to collapse
I really hope other isn't any voltage or amperage changes needed of that can blow that battery up real quick, plus it can't stop charging, you'll need to monitor that yourself.
Thanks for the info though, it does appear to be yet another somewhat common bug these have that can be addressed by a user if they feel the need to.
Tapatalked from my HTC DNA - ReVolt
Not switch the charger off when the battery is full?
I think the charger there is a shutdown would otherwise overload the battery, right?
Or do this the motherboard?
Anyway, for me the tab is fully working now and if the battery is broken, it is not a big expense to replace them .
frischeis said:
Not switch the charger off when the battery is full?
I think the charger there is a shutdown would otherwise overload the battery, right?
Or do this the motherboard?
Anyway, for me the tab is fully working now and if the battery is broken, it is not a big expense to replace them .
Click to expand...
Click to collapse
I was saying the board is in charge of cutting the battery charge off, not the charger itself so maybe keep an eye on it, its a good way for an explosion or fire.
Tapatalked from my HTC DNA - ReVolt
A100 tablet not charging still
Frischies is much braver than I am.
Wiring the battery direct to the charging port- I would definitely worry about burning up the battery or causing a fire - especially while charging when I sleep. I have had more than my fair share of run ins with fire.
The Motherboard I ordered arrived and I installed it. It was listed as "factory refurbished", but unfortunately will not accept a charge. I thought it had charged overnight at one point, but all it does is blink orange and the battery reads 3% or 0%. Turning the device off when plugged in and doing a reset has not helped. The vendor has been gracious to do a replacement, so I will follow that route until I get a working motherboard.
I have discovered that the docking station will be a welcome addition to my Acer tablet paraphernalia! Although this model docking station isn't the one that allows HDMI throughput, it still will be nice for music, and other media. A Bluetooth keyboard and the tablet will offer yet another computer tool!
First things first though, get the tablet to accept a charge - until then it is a really wide flat paper weight! I am getting VERY adept at opening the tablet and removing the internals!
It is working again! The motherboard sent was defective but vendor issued an RMA. Received the replacement yesterday, installed it last night. Charged over night and fully functional this morning! Ahhh it feels good to have my little buddy back again. Didn't realize how much I used it, until I couldn't use it! Thanks to all for the help.
Sent from my A100 using xda app-developers app
I purchased an original charging dock and I've noticed some strange issues. There are times when it just seems to disconnect itself randomly. It will charge the phone for a few seconds, then disconnect for a second, then charge for another few seconds and so forth and so on.
There was one time when I placed my phone in the dock before going to sleep, I think the phone had somewhere around 20% battery left and by morning, my phone was completely discharged and it didn't even power on until I charged it by cable for about an hour.
Strangest thing is, it seems to only do this when battery is low. I've tried using it when battery is over 80% and it doesn't seem to show this issue anymore.
Does this make any sense? Should I return it?
zgomot said:
I purchased an original charging dock and I've noticed some strange issues. There are times when it just seems to disconnect itself randomly. It will charge the phone for a few seconds, then disconnect for a second, then charge for another few seconds and so forth and so on.
There was one time when I placed my phone in the dock before going to sleep, I think the phone had somewhere around 20% battery left and by morning, my phone was completely discharged and it didn't even power on until I charged it by cable for about an hour.
Strangest thing is, it seems to only do this when battery is low. I've tried using it when battery is over 80% and it doesn't seem to show this issue anymore.
Does this make any sense? Should I return it?
Click to expand...
Click to collapse
I would probably say that the magnetic cable is not connected properly but... If possible, try charging it again, say for a period of time - 10 mins perhaps etc or checked with your friends/family and use their phones to test it out too.
Personally, I never like the dock as similar issues that has happened to you, happen unto me too!
My solution to this - took out the cable straight out of the docking mechanism (do this at your own risk - as it will void either the warranty or refund)
Perhaps this link may gives more information -
I did exactly that. Took out the cable and now it seems to charge ok.
zgomot said:
I did exactly that. Took out the cable and now it seems to charge ok.
Click to expand...
Click to collapse
That's great. I had a bigger problem, but not with the dock. My device was not charging(it was discharing) and the phone kept spamming the charge sound. I opened it up and i was suprised that my phone was already opened(bought it 2nd hand) and the dock connector was detached(only the back door pushing it a bit.). I connected it and everything works perfectly now. I am glad that you solved your problem easier.
HI,
had a similar Problem with this docking station. For me it seems that the docking station doesn't fits right to the Smartphone. I put a plastic card (like a credit card, but without any chips) behind the Phone when i charge my phone with the docking station.
This started happening a couple of weeks ago, prior to the latest update.
When I put my P6P on the Stand 2 at the end of the day, I get the little sound and animation that it started charging. After a few seconds I see the message at the bottom that it's "charging wirelessly" and a time until full. I have the stand set on Max Charging and adaptive charging turned off. After a minute or two, the fan comes on. About 10-15 minutes later, it stops charging, (the message goes away and the current % is shown), and the phone is really hot. No matter how long I leave it, even overnight, it never starts charging again. The phone remains really hot until I remove it from the stand.
About 50% of the time, if I reboot it, it will behave normally again, but last night nothing I did would get it to charge wirelessly. I ended up plugging it into the wire. It never gets warm when charging on the wire.
It has been working fine since I purchased it in Nov. This just started a few weeks ago. Has anyone else seen this?
Dave
Try cable charging.
Charging will disengage if the battery temperature gets too hot, about >103F
Fast charging may disengage if the temperature gets beyond 95-100F.
Ideal charging battery start temp is 82F.
Erratic charging can indicate a failed battery.
Any swelling is a failure, replace asap if so.
blackhawk said:
Try cable charging.
Click to expand...
Click to collapse
As indicated in my OP, cable charging works fine every time. The phone doesn't even get warm. It's only wireless charging that's an issue, and not every time I try to charge it wirelesly. It's like the phone decides to stop accepting the power, and it starts to heat up because of it.
I take it you don't have a second wireless stand to rule out if it's the phone or your STand 2 that's behaving badly?
I have been using a genric set-up from charger to stand with my P6P and did have charging issues a few months ago with wireless charging not working correctly but the May update fixed it.
Dataman100 said:
As indicated in my OP, cable charging works fine every time. The phone doesn't even get warm. It's only wireless charging that's an issue, and not every time I try to charge it wirelesly. It's like the phone decides to stop accepting the power, and it starts to heat up because of it.
Click to expand...
Click to collapse
May be a hardware failure in the phone or stand.
Remove a case if it has one and try.
C ports generally last for thousands of charge cycles and cable charging is better for the battery, produces less heat.
FoneWatcher said:
I take it you don't have a second wireless stand to rule out if it's the phone or your STand 2 that's behaving badly?
Click to expand...
Click to collapse
No, unfortunately I only have one stand. I'll keep trying things to see if I can narrow down the exact situation when it occurs. I was mainly checking to see if anyone else had something similar happen and there was a quick fix.
blackhawk said:
C ports generally last for thousands of charge cycles and cable charging is better for the battery, produces less heat.
Click to expand...
Click to collapse
Yeah, and I've always used cable charging on all my phones in the past with no issues. I thought the stand was cool in that it could fast charge and keep the phone upright so it's easy to read in the middle of the night. I'd really like to keep using it. It was stupid expensive and I'd hate to let it go unused for that price.
Thanks!
Dave
I've been experiencing similar problems with my Stand. Sometimes it charges normally, sometimes it charges REALLY, and I mean really slow... And sometimes I get the "Not charging" message for whatever reason.
I think it's gotta be an issue with the adaptive charging on the Pixel 6 Pro, because every time I put my other phone on the stand, my S21U, it charges without any issues.
Dataman100 said:
Yeah, and I've always used cable charging on all my phones in the past with no issues. I thought the stand was cool in that it could fast charge and keep the phone upright so it's easy to read in the middle of the night. I'd really like to keep using it. It was stupid expensive and I'd hate to let it go unused for that price.
Thanks!
Dave
Click to expand...
Click to collapse
Yeah, I feel you. It could be firmware, a SEU which are rare but do happen. A reflash would fix it if so. Probably not worth the trouble to try and more likely to be hardware.
Cable charging be the best plan for now I think.
The old micro connectors were horrible and invariably would fail. The C connectors are much more robust. This N10+ is heavily used and the C port jack is still tight and has well over a thousand cycles plus a few drops and pulls. Even the original cable is still AOK.
Just came across this thread while looking for similar problems on my P4 with a 1st Gen stand. The phone showed the normal 'xx% charging wirelessly' display then at 79% it changed to simply '79%'. After a while the message went back to 'xx%charging wirelessly'. I took the phone off the charger and using a utility app called 'inware' I looked at the battery temp which was at 41.5C/106F.
So I'm guessing that the phone will stop charging when the battery gets hot and resume when it cools down a bit. What is 'too hot' and when does it cause damage, I have no idea. Google told me in a chat session the other day that it's perfectly acceptable to leave the phone on the stand all day. Personally, I take it off at about 80% charge which lasts me all day.
Mine also has this behaviour, taking it off and placing it back on continues to charge
I just sent my stand back for similar reasons - not good when a $12 Qi charger from Amazon was doing a better (and faster!) job charging.
I sent mine back too & am now using a charger that I bought at IKEA for £5. It's a shame as I thought that Google would have made more effort to integrate the charger & phone. Oh well, bling gone!