[URGENT] Not Able to Change Recovery - Lenovo Vibe K5 Plus Questions & Answers

Help me guys, i am not able to change recovery in my lenovo k5 a40 2gb, i am using latest twrp by shreps and whatever i do only shreps latest recovery boot other recoveries stuck on lenovo screen. And only 7.x roms boot, 6.0 roms doesn't boot. Help me guys wanted to change recovery to russian or scritch ver and to flash pac rom. All are stuck at lenovo boot screen. And when i flash pac rom only pico gapps successfully flashed other gives error 70.

Remove battery and turn it on with power and vol-
If you reach fastboot, flash Russian recovery via CMD. Remove battery, boot in recovery (power and both volume pressed) and clean all partitions with new recovery, also format data and cache to EXT4 because Russian recovery doesn't support F2FS. Then try installing ROM (I recommend AQSD Lineage)

KiiKeEp said:
Remove battery and turn it on with power and vol-
If you reach fastboot, flash Russian recovery via CMD. Remove battery, boot in recovery (power and both volume pressed) and clean all partitions with new recovery, also format data and cache to EXT4 because Russian recovery doesn't support F2FS. Then try installing ROM (I recommend AQSD Lineage)
Click to expand...
Click to collapse
Sorry bro no luck. Not able to reach fastboot mode after removing battery and connecting with pc. But reach fastboot mode with battery and connect to pc and then remove the battery still in fastboot then flashed scritch r4 recovery but no luck only get lenovo boot screen.

Anyon, guys i cant use this phone without a custom good working rom( prefer mm because of xposed)

Guys please help me i cant wait to tweak with my phone, whatever i do to change recovery or flash pac mm rom it return to lenovo screen, what the heck?

mr.badman said:
Guys please help me i cant wait to tweak with my phone, whatever i do to change recovery or flash pac mm rom it return to lenovo screen, what the heck?
Click to expand...
Click to collapse
Flash Stock Rom first of all with the help of QPST Tool and then flash latest twrp recovery. After that flash pac-rom.
That's it, i am posting as it worked for me.
Stock Rom - http://moto.shreps.fr/?dir=Lenovo Vibe K5 (A6020)/ROM/StockFirmwares
Hope it work for you.

Related

Can't get into recovery

I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Dishagra said:
I installed CM 11 on my Xiaomi redmi 1s,everything was working fine except for 2 or 3 little things but a major problem occurred when I thought of flashing another ROM and now I CANT ACCESS RECOVERY MODE no matter what I try. I tried the button combination(power switch+volume up), tried adb and even tried apps like ROM Manager and, TWRP Manager and quick boot but haven't found any luck. Whenever I try to boot into recovery the phone gets stuck on the MI boot logo. I need to flash another rom and can't seem to find any other way to wipe y phone data, cache and dalvik cache and so I need help to counter this issue.
Please help me.
Click to expand...
Click to collapse
Flash any custom recovery via fastboot mode
Download .img format of custom recovery
Boot into fastboot mode n run this command on CMD
fastboot flash recovery <filename>.img
Filename can be anything depending on name of image file you download
Not Working for me
RajGopi said:
Flash any custom recovery via fastboot mode
Download .img format of custom recovery
Boot into fastboot mode n run this command on CMD
fastboot flash recovery <filename>.img
Filename can be anything depending on name of image file you download
Click to expand...
Click to collapse
I am afraid this solution doesn't work for me. My thoughts are that I have somehow lost my recovery partition. I accidently installed CM 11 without first installing a custom recovery. My bad! but have yet to find a solution that works.
Try flashing a recovery using Rashr-flashtool
And boot to recovery (Vol up + Power , for 10s even after screen is on )
Solved
Shahi00 said:
Try flashing a recovery using Rashr-flashtool
And boot to recovery (Vol up + Power , for 10s even after screen is on )
Click to expand...
Click to collapse
I solved my problem by using Flashify app but I had to use it every time as recovery would not stick. I flashed trwp and installed stock (english version) rom and stock recovery and everything is working fine again. I will not make the same mistake again. I have since installed CWM recovery through stock recovery so now I can flash roms in peace again.
Waxwrong said:
I solved my problem by using Flashify app but I had to use it every time as recovery would not stick. I flashed trwp and installed stock (english version) rom and stock recovery and everything is working fine again. I will not make the same mistake again. I have since installed CWM recovery through stock recovery so now I can flash roms in peace again.
Click to expand...
Click to collapse
i have the same problem how to solve it please describe it briefly ^^

Z00A Only boot to TWRP, cant boot to system

Hi i've just update my bootloader from LP to MM, i unlock bootloader, install latest TWRP
I boot to TWRP and install XOSP 7.1 ROM, everything works fine, except for my sim 1 doesn't work, so i wipe and flash XOSP 6.0
Right after the installation of of XOSP 6.0 finish, my Z00A cant boot to system, it boot straight to TWRP instead
I tried eveything i can, flash another ROM, reinstall bootloader,flash every custom recovery, back to stock recovery, adb sideload stock firmware, literraly everything
The only problem is it just boot straight to twrp, selecting boot to system, bootloader in TWRP still lead to TWRP, same with adb commands
The only thing i can do is hold down power + volum up to get to bootloader
Please help
FIX
Flash TWRP 3.0.3.3 and it worked
Incase you want to flash XOSP 6.0, downgrade to LP Bootloader
perform advanced wipe in twrp. and then flash stock rom again. if no help then flash xfstk
Minatoazki said:
Hi i've just update my bootloader from LP to MM, i unlock bootloader, install latest TWRP
I boot to TWRP and install XOSP 7.1 ROM, everything works fine, except for my sim 1 doesn't work, so i wipe and flash XOSP 6.0
Right after the installation of of XOSP 6.0 finish, my Z00A cant boot to system, it boot straight to TWRP instead
I tried eveything i can, flash another ROM, reinstall bootloader,flash every custom recovery, back to stock recovery, adb sideload stock firmware, literraly everything
The only problem is it just boot straight to twrp, selecting boot to system, bootloader in TWRP still lead to TWRP, same with adb commands
The only thing i can do is hold down power + volum up to get to bootloader
Please help
Click to expand...
Click to collapse
Just flash this twrp
https://infinitus-rom.com/downloads/uploads/TWRP/TWRP_3.0.3.3_Zenfone2.zip
And Flash rom again ?
In TWRP select reboot -- then power off .
Count to 15 -- press power plus vol+ to go to bootloader
Use Modder tool by giovix in general section - Return to stock option , in that option select boot.img and then recovery.
Then unlock bootloader again in modder
flash twrp "............................................................................................"
root ........ "............................................................................................"
Flash Cleanstock rom in rom section -- set it up ,see if prob persists- if not, back it up .
Flash 3 0 3 3 TWRP and whatever you like after
Your problem stems from the fact that you upgraded your bootloader to mm to install 7.1.but you need to downgrade to LP bootloader for 6.0 rom
Sent from my ASUS_Z00A using Tapatalk
Thanks
Flash TWRP 3.0.3.3 and it worked, many thanks guys. Latest version may not be the best
link to twrp is not working. Please please please anyone upload the TWRP_3.0.3.3_Zenfone2.zip one more time!

My lenovo zuk z2 bricked :( :( :(

At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
csemasud said:
At first I flashed Nougat chines rom from stock marshmallow rom which is also chines rom.
But i did this after unlocking the bootloader and TWRP flashing.
Then my phone was start and i gave factory reset from settings menu
After that phone is not open
The led notification is come and also the ZUK logo come but disappear immediately
What is the solution ?
Click to expand...
Click to collapse
Press the power button until it vibrates and reboots. Reboot into recovery. This ll take you to TWRP.
Now Wipe -> Advanced Wipe -> Wipe Cache, Dalvick Cache, System, Data.
Download any stable nougat rom like AEX 4.6, DOT OS Latest, Viper 3.1.1 and transfer it to OTG pen drive and connect the OTG drive to the phone and install the ROM of your choice by selecting the storage as OTG and reboot to system after flashing.
Your phone should boot normally now.
Try this and update if it worked.
I can't enter into recovery mode
either stock recovery or TWRP
csemasud said:
I can't enter into recovery mode
either stock recovery or TWRP
Click to expand...
Click to collapse
Flashing Stock Nougat may have relocked the bootloader.
Unlock the bootloader again and flash the latest TWRP 3.2.1 in fastboot mode.
when i connected through PC by Adb sideload it's show no device found in command promt
try 9008
csemasud said:
when i connected through PC by Adb sideload it's show no device found in command promt
Click to expand...
Click to collapse
Try mi flash method, the i dont know much about this but you can search on xda
This one works 100%
https://forum.xda-developers.com/le...-to-recover-hard-bricked-zuk-z2-plus-t3576007
had exactly the same problem and my phone works now with this
I have unbeicked my device yesterday with MI flash, ask me if you run into problems

Need Help ! : Le 1S Stuck in Recovery Boot Loop

I have a spare Le1s with me so wanted to play around with it for my tiny project, using Le1s as universal remote with Alexa/Echo (using Anymote Skills).
I flashed LineageOS ROM and GAPPS, it booted fine.
Then i tried to flash TWRP using adb. Since then it is on continuous Recovery Boot Loop. It switches On to Stock recovery screen and switches off within seconds and then switches back on.
So I am not able to ADB or use SP Flash tool to flash again.
Tried hard reset also, nothing is working. Vol+ Vol- Power also not working.
So it is lying on my side table going ON and OFF in recovery screen
Any advise, please share.
Thanks.
Flash stock firmware through sp flash tool...search in xda
Device needs to be detected to use SP flash tool. As i mentioned it is in loop automatically switching On and Off in recovery.
Kaps said:
Device needs to be detected to use SP flash tool. As i mentioned it is in loop automatically switching On and Off in recovery.
Click to expand...
Click to collapse
Open device in recovery mode when it switched off ... And then format data in wipe by typing yes .... Then flash rom u want ... ?
Well the question is how ?
Device is not switching off and not staying in recovery its goes On and Off in a loop.
Try to open other modes .... Fastboot ...if it stays flash new twrp ..... And if it boots again into recovery then may be it's a hardware issue your power button may be stuck

Lenovo P2 on Custom Rom (Havoc 3.2) cannot boot in Recovery anymore

update : problem solved after fastboot flash twrp-3.4-kuntao.img
Hello, I am on Havoc 3.2 (magisk is not installed) and would like to upgrade but cannot boot into recovery anymore :
device turned off won't boot in recovery when maintaining power + volume up (normal boot after a while or power off if I keep button pressed)
USB debug activated, "adb reboot recovery" will reboot the device normally
I can go in bootloader with power + volume down though.
What should I do to upgrade my rom ?
Possibly with the simplest option I get to sort this out...
Should I flash a Stock rom in bootloader ? or is there a simpler way to do it ?
back in February 2020, I remember that I encountered a lot of issues to install a rom on my device... I had to flash stock Android 6 rom back and I could flash custom rom only by adb sideloads. Is it possible something is deeply messed up in my filesystem and how can I fix it ? or check it ?
Thanks in advance.

Categories

Resources