Related
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
mrmazak said:
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
Click to expand...
Click to collapse
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
I give my phone to a friend to work on it. If he can't fix it I try new multi tools version to flash phone.
Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
I ever have similiar problem with you dude, but it's solved now, if you always stuck on " its OK but when my phone want to start its stuck on google page "just a sec...", its call google accont verification, i'll by bypass with this script, save as to .bat and put on adb folder
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
in fastboot type:
fastboot -w
after all it's works to me to bypass google account verification
and if now your problem is
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
i solve with re-flash system from this
https://androidfilehost.com/?fid=673956719939830152
fastboot flash system system.img
and doing TWRP Flashing
https://forum.xda-developers.com/devdb/project/?id=25826#downloads
fastboot flash recovery_ramdisk complete_twrp_ramdisk.img
and voila my problem solved..
mrmazak said:
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Click to expand...
Click to collapse
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Mohammadreza76646 said:
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Click to expand...
Click to collapse
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
mrmazak said:
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
Click to expand...
Click to collapse
It have stock recovery.
Mohammadreza76646 said:
It have stock recovery.
Click to expand...
Click to collapse
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
mrmazak said:
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
Click to expand...
Click to collapse
No. System boot successfully!
I will send you screenshot:
Mohammadreza76646 said:
No. System boot successfully!
I will send you screenshot:
Click to expand...
Click to collapse
here you are
Mohammadreza76646 said:
here you are
Click to expand...
Click to collapse
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
mrmazak said:
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
Click to expand...
Click to collapse
Thanks )
I'm so sorry for my posts, it's because I don't have a stable connection and I can't see notification of my thread.
I gave my phone to friend an he fix IMEI (I don't know how)
But OEM is steel lock.
I think he did it with using special box.
Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!![/QUOTE
Are u able.to boot into twrp ?
Click to expand...
Click to collapse
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
IonDEfeso said:
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
Click to expand...
Click to collapse
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Do you know what the boot.img files name is after extraction?
I have extracted all 3 update zips and cannot find anything called boot.img
By the way, thank you.. After updating magisk I have been dealing with failed recovery and failed boot for over a week and this is the first reply anywhere that looks promising
IonDEfeso said:
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
Click to expand...
Click to collapse
if you were on oreo. then there is not a boot.img, instaed there is seperate ramdisk.img and kernel.img.
i have all the files already extracted for oreo and a backup from nougat as well.
https://androidfilehost.com/?w=files&flid=265998
make sure you know what you are doing before flashing.
for example. on oreo the boot and recovery share one kernel image. SO if kernel is messed up you will not be able to boot "boot" or "recovery"
Hello together,
after many tries to get my nokia 3.2 rooted, i end up now with a black screen.
Only the Qulacomm mode is working.
Get anyone managed to flash the stock firmware with QFIL provided from the rooting thread?
I always end up with "sahara fails".
Every help is welcome!
Thanks!!!!
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
page1875 said:
After many tries I have finally put my phone back to life.
My instructions how to do it will come soon!
Click to expand...
Click to collapse
please do, i encountered a similar problem.
HowTo Flash STOCK 00WW
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
page1875 said:
1. Trigger nokia 3.2 to edl-mode (https://forum.xda-developers.com/nokia-3-2/how-to/guide-how-to-trigger-nokia-3-2-to-edl-t3962841)
2. Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
- This was the main problem. I never managed it to flash the image with the Windows Programmer QFIL. After more research in Internet, i found finally a Linux application called QDL that work directly without any problems. This application can be found here https://www.96boards.org/documentation/consumer/guides/qdl.md.html .
- Flashing the software ends up into a bootloop. Also i got a message on startup that the bootloader could not be trusted anymore. After a software-update, this message disappears.
3. Flash all the user images again manually with fastboot.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash vendor vendor.img
flastboot flash vbmeta vbmeta.img
Whyever you have to flash this partitions only to the active partitions without the suffix _a or _b.
Then the bootloop is finished.
The phone boots normally to Android ONE.
The next problem which occurs on my phone is now that it is not able to connect to GSM network. I guess this happens because i deleted all the necessary partitions for the modem (modemst1, modemst2, fsg).
I get it managed to restore the imei, but still no service available.
In original my phone had the software 00EEA. Perhaps they use different drivers. My luck is that i got a cheap damaged phone from ebay with that firmware.
My next step is to modify the code from QDL that it can read the partitions from the damaged phone and save the software to computer.
Then i will flash this software to my phone and look if this software will run on my phone!
Click to expand...
Click to collapse
Thank you for your reply, it seems that your problem is more complicated than mine.
I have a global variant with 00WW software and i attempt to root the phone. I successfully flash the patched boot.img and had root access. However wi-fi didn't work after that.
Since before flashing the patched boot.img my phone was running on a different firmware from the one that boot.img was extracted from, so i think that was the problem.
I attempted to use QFIL to flash my phone back to 00WW_15 and it failed half way, bricked my phone.
Normally you can use the EDL Mode every time.
My phone only showed black screen and it was always possible to connect in EDL Mode and flash again.
Did you try to flash again? What happens then?
Flash the given image from this thread (https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206)
Click to expand...
Click to collapse
What did you mean by Flash the given image ? Was it flash the firmware package with QFIL ?
My main problem is flashing, it always failed half-way and the error log reported that needed files were missing from the package.
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
page1875 said:
Okay. I used the linux program QDL for flashing.
But i saw, that in the xml file rawprogram0.xml a few files are missing.
The linux programm jump over these files but perhaps QFIL do not.
For example is there a picture.img listed which is not available..
Try to remove them manually from the rawfile and test again.
Click to expand...
Click to collapse
@update:
Also the files "demoapp.img", "dp_AP_signed.mbn" and "dp_MSA_signed.mbn" are missing.
Remove them from the XML file and try again!
@update
Okay QFIL still failed half-way but i manually flash the user images and my phone boots normally now
Hello,
my nokia 3.2 europe variant wont boot up its stuck in fastboot mode. What can i do to bring it back?
I get this: FAILED (remote: partition table doesn't exist)
P.S. if i do a fastboot reboot it boots back into bootloader
I also had this problems for many many times and don't know what went wrong when this happens.
The only thing that helped was flashing the complete firmware again in EDL-mode.
You can try first to flash only the 5 user-images with fastboot, which i mentioned before in this thread.
I uploaded this files for you, because you don't will find the europe files in internet yet.
Here is the link:
https://transfernow.net/81iti7q21s0s
Good luck!
Hi,
Thank you very much. Is this the complete Firmware? (All Images from Device) Another question: I couldnt Access the recovery System. Did you have the same Problem when your Nokia didnt boot up and was stuck in Bootloader? So is this normal that the recovery is unaccessible?
Yes, that also happens sometimes with my phone.
No, that are not all firmware files, which you need to do a full EDL-Flash.
But with this files you can first try a fastboot flash!
If it does not work, you can take all the other files from the Global-Stock-Firmware, given in the thread https://forum.xda-developers.com/nokia-3-2/how-to/rooted-nokia-3-2-t3945206.
Delete the 5 files with the same names, flash the Global-Stock-Firmware in EDL-Mode, with QFIL or QDL, (without the 5 files) and in the following flash the 5 europe-image files with fastboot.
Thanks, ive sent it in and got Friday a 00WW Variant of the device back. I will upload those User images for 00EEA to my Google drive so that anyone who needs those files can download them
hello
i wanted to install custom rom and i bricked my phone. i lost recovery mode and i have only fastboot mode .but can not write any img file for example twrp.img beacuse show this error : FAILED (remote: partition table doesn't exist). can please anyone help me.
thank you very much
thanks so much i was able to put my phone back to life. i had almost given up.
smure said:
thanks so much i was able to put my phone back to life. i had almost given up.
Click to expand...
Click to collapse
Hello to ervery one
how you flashed your phone. can you please guide?
i am also stucked in fastboot mode after rooting.
damn... I've been finding on how to restore the wifi and sound because I uninstalled magisk and it failed. I don't think I can thank you enough for this post.
Last night I do have a problem with the custom rom that I have installed, because of the battery problem keeps on dropping, so I decided to go back to the official stock rom which is for global however after flashing the fastboot rom via Miflash Tool, I have a welcome message that says Find Device storage corrupted. Your device is unsafe now. I thought that I just need to activate this to the device admin, after a reboot I tried to check it out if this message if this message will still pop up, and it keeps on popping up. I have flashed the rom again and it keeps on happening.
Things that I have Tried:
So I tried to check for other ways that I could get rid of this but this doesnt work on the terminal via TWRP. "
[GUIDE] How to fix "Find Device storage corrupted. Your device is unsafe now".
[GUIDE] How to fix "Find Device storage corrupted. Your device is unsafe now". How to fix "Find Device storage corrupted. Your device is unsafe now" ? (At your own risk... I'm not responsible for damage or brick) Required : - Be rooted and...
forum.xda-developers.com
".
The one that works:
Things that you needed:
1. Download Mi Flash Tool(https://www.xiaomiflash.com/)
2. Minimal ADB and Fastboot
3. 7zip or BreeZip
4. TWRP A12(
TWRP A12.rar
drive.google.com
) if you are using other MIUI and devices and want to check it this will work then just use your twrp that is recommended for your mui device.
5. Global Rom (https://xiaomifirmwareupdater.com/miui/alioth/stable/V12.5.6.0.RKHMIXM/)
warning: make sure that you are using the right rom for your device, my device that I am using is a global variant so I need to flash a global version, if you are using other MIUI device and want to check it out just download the miui that works for you must be on a later update of the rom if the latest current rom that you are working on right now didnt work.
Steps to follow.
1. Extract the Rom which you have downloaded using the 7zip or BreeZip, so for me I extracted the version 12.5.6.0 take note that this is not the latest rom but for this to work we need to be in a later update this rom is an android version 11.
2. after extracting the fastboot rom file type TGZ you will notice that the one that you extracted is on a TAR file type, and you need to extract the TAR file type for you to have the folder "alioth_global_images_V12.5.6.0.RKHMIXM_20220210.0000.00_11.0_global_62b4f5d6ca"
3. Using the Mi Flash Tool, just pick the clean all and start the flashing.
4. After flashing the rom set up the phone but do not update it.
5. On your extracted folder for the rom go to the folder that says images and look for 'persist" this is an img file. copy the persist img file and paste it on your Internal memory of your phone.
6. Turn off your phone and go to fastboot by pressing the volume down as well as the power button. You will notice that the fastboot logo is the older version since we are using an older rom.
7. Extract the TWRP A12 and you should have the disc recovery image of it, copy and paste it on your Minimal ADB and Fastboot folder and rename it "recovery".
8. While you are on the Minimal ADB Fastboot folder make sure that your phone is plug in to the usb port on your computer, click the cmd here on the Minimal ADB and Fastboot Folder and you should able to run the cmd.
9. run the following commands:
fastboot devices (then press the enter)
warning: make sure that the fastboot devices is able to see your device.
after seeing the device run this command:
fastboot boot recovery.img (then press enter)
the device should boot to the twrp if its on chinese look for settings and set it to english. we are not flashing the twrp we are just going to use it temporarily thats why we are only going to boot it to twrp recovery.
10. On your twrp, go to install, click the install image and look for your persist.img that we have copied earlier to your internal memory
you should find it on the sdcard folder. just flash and you will see that you have successfully flashed the persist image and then just reboot your phone.
After rebooting your phone you will notice that the "Find Device storage corrupted. Your device is unsafe now." will not prompt. Since I already have the current fastboot rom I have tried to flash the current fastboot rom and locked my device and fixed the problem permanently without any problem.
You wrote too much for something that could be written in a few sentences. And why would anyone downgrade an android or flash a clean fastboot ROM? (Android or MIUI version doesn't matter)
Summary guide:
1. Download the fastboot ROM from here and extract the "persist.img" image or dump the "persistbak" partition from your device and rename this file to "persist.img"
2. Put persist.img into your device's internal memory and go to TWRP
3. In TWRP, go to: Install> select install image> select file persist.img> select "Persist" partition
4. Restart the device, it should work fine
uvzen said:
You wrote too much for something that could be written in a few sentences. And why would anyone downgrade an android or flash a clean fastboot ROM? (Android or MIUI version doesn't matter)
Summary guide:
1. Download the fastboot ROM from here and extract the "persist.img" image or dump the "persistbak" partition from your device and rename this file to "persist.img"
2. Put persist.img into your device's internal memory and go to TWRP
3. In TWRP, go to: Install> select install image> select file persist.img> select "Persist" partition
4. Restart the device, it should work fine
Click to expand...
Click to collapse
Wrote it down for the newbies that doesnt know how to fix anyway thanks for the summary. I have to downgraded it because the latest current rom doesnt work give me "invalid sparse file format at header magic" error as I flash the persist.img file, via twrp.
mizuhored said:
Wrote it down for the newbies that doesnt know how to fix anyway thanks for the summary. I have to downgraded it because the latest current rom doesnt work give me "invalid sparse file format at header magic" error as I flash the persist.img file, via twrp.
Click to expand...
Click to collapse
If you are using TWRP from Nebrassy then use skkk TWRP or OrangeFox. Flashing persist should work fine on both recoveries (I did it myself recently).
uvzen said:
If you are using TWRP from Nebrassy then use skkk TWRP or OrangeFox. Flashing persist should work fine on both recoveries (I did it myself recently).
Click to expand...
Click to collapse
Thats great but this is the one that works for me anyways. At least we have found out the things that we needed in order for it to be fixed. Just sharing my ideas and how did I fixed the problem myself. Thanks for sharing of your ideas. Hoping that we could share our ideas to others as well. Been on a nightmare last night cant sleep because of this problem. Trying to figure out what to do since using the cmds via terminal on twrp doesnt work for me. Need to downgrade for me to fix it.
mizuhored said:
Thats great but this is the one that works for me anyways. At least we have found out the things that we needed in order for it to be fixed. Just sharing my ideas and how did I fixed the problem myself. Thanks for sharing of your ideas. Hoping that we could share our ideas to others as well. Been on a nightmare last night cant sleep because of this problem. Trying to figure out what to do since using the cmds via terminal on twrp doesnt work for me. Need to downgrade for me to fix it.
Click to expand...
Click to collapse
Could you please confirm if flashing persist.img doesn't mess up with sensor like fingerprint, l1, compass etc..? I have seen other forums talking about possibility of losing these in case perist is flashed from rom. I have this message for some time now, but all other sensors work fine, even l1 certification and saftynet. Thanks in advance.
hello all, i have an moto g8 xt2045-1 rav, with android 11 Is there no guide to root? magisk I have read that they lose touch ability. thanks
Not sure where you got that info, but I am writing this on a rooted XT2045-2 (i think the only difference to yours is color).
TL;DR: get the boot.img, patch it on the phone using the magisk app, and flash it on the device.
If you have unlocked the bootloader you can skip the following:
- Before you start reconsider if you really want to unlock the bootloader.
- Please note that unlocking the bootloader can and will cause you to lose the warranty on the device.
Here is a website that explains how to unlock the bootloader.
Once you have done that, you need the magisk zip file which you can find online.
From here I will assume that you know how to get into the bootloader.
I personally was unable to get TWRP on android 11, but in case you have it or any other custom recovery, and it works, you can try installing the zip.
If you cannot get a custom recovery, you will have to get the boot.img file for your device.
There are a few ways you could do that, those being finding the stock rom on lolinet and the official LMSA pc app.
I personally like the LMSA method more, as it automatically detects and downloads the correct stock rom.
What you are looking for is the boot.img file.
In case you get the zip from lolinet just extract it and skip the following steps.
In case you are using LMSA, get into the rescue and just download the file, you don't want to rescue the device.
Once you have gotten the zip, extract it and get the boot.img file.
On the device, boot into the system normally and install the magisk app like any other apk.
Transfer the boot.img file to the device, then open magisk and click on install magisk.
Select "choose and patch an image" and select the boot.im that you transfered earlier.
Once that is done you will see the path to the modified magisk-boot.img file (it will have a different name) which you have to get onto the pc.
Once you have the modified boot image and the bootloader is unlocked, go into the bootloader and flash the modified boot image on the device. (fastboot flash boot boot.img*)
*change boot.img to the actual file name
Feel free to ask questions, I tried to make it as detailed as possible.