Related
Please quick answer !!!
http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
kacper12897 said:
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
Click to expand...
Click to collapse
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
thank you for the guide buhohitr.
worked perfectly for me
buhohitr said:
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Click to expand...
Click to collapse
404 Page Not Found
Oh snap! Something broke! A genius monkey has been alerted.
Until he fixes it, use our glorious search tool to find ROMs, apps, tools, and other sweet mods for your phone.
haha.... http://forum.xda-developers.com/gala...ernel-t3240218
Hi friends today I am going to tell you how to root note3neo lollipop stock rom. Plz follow all steps. I have successfully rooted without any problem but I have heard that some are loosing their imei. So make a backup as soon as you are in twrp. Now the process as follows.
Do it at your own risk.
First Download the below file. It contains all the files including the USB drivers.
Link -: https://mega.nz/#!C99gxYDR!wkIse-u4wfCKIn-p3iH-6QSjtZ74p8Zom82-uRjqdcY
Now follow the steps below.
Installation
1.)Turn on usb debugging in developer option.
Tap the Settings option.
Tap the About Phone option.
Keep tapping the Build Number option (seven times) until it says you are a developer.
Tap the new Developer Options menu that appears.
Make sure that the USB Debugging option is checked.
2.)Power off your device, press and hold Volume Down + Home + Power buttons at the same time until you see a Warning with a Yellow Triangle.
3.)Now press Volume Up button. Your phone now is in ODIN MODE (Download Mode).
4.)Open Odin on PC. ( Odin is available in the link zip file )
5.)UNTICK everything
6.)Connect Phone to PC using USB Cable.(You will see added message on Odin)
7.)On Odin click on PDA(till version 3.07) OR click on AP(after version 3.09)
8.)Select the twrp.tar.md5
9.)Press on start.
10.)Remove battery quickly after Odin says pass before it boots up.
11.)Insert battery again. Press Power + Volume Up + Home button, and hold till you see the Samsung logo.
12. Next it will boot into twrp. Now first I suggest you to make a backup.
13. Now flash the SuperSU.zip file which I have provided in the zip.
Done. Your mobile is now rooted.
. Please Thank me If Helped
Now this is for the people who want xposed.
Download the file below and extract it.
https://mega.nz/#!uw8hRJQL!lnFobDr36EzNZhH15ibnIejnn9TsIIkYGDMPCOilfnA
You will find 2 file. One of apk and other is of zip.
Install the apk file. Next reboot to recovery and flash the 2nd file which is of zip.
Reboot will take some time.
Done
thanx bro
This is for All Carriers.
You Do Not Need To Be Rooted To Install This Rom
You Must Be On Stock CRF1 Oreo Firmware Before Starting
This Takes Some Patience To Install
What Is Safestrap
Safestrap is a Bootstrap / Recovery for locked bootloader phones. Safestrap is now based on TWRP Recovery (a touch based recovery) and you can perform .zip installs, backups and restores here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
ODIN_ADB_G930_CRF1_ALL_CARRIERS_V3.zip
Google Drive Mirror
Odin Files
G930TUVU4CRF1_G930TTMB4CRF1_TMB.zip
Google Drive Mirror
Feature:
SafeStrap Recovery PreLoaded
Official Oreo
Safetynet Passes
Samsung Pay,Pass,Secure Folder Working
Samsung Cloud Enabled
Places Tab Enabled
Spam Caller Id Enabled
Call Recording Enabled
Native Status Bar Speed Meter Enabled
Custom Boot Animation
Helpful Key Combos
Recovery Mode
Home+ Volume Up + Power @ Same time
Download Mode
Home + Volume Down + Power @ Same time
Safe Mode
Phone Powered Off
Press and hold the Power key past the model name screen.
When “SAMSUNG” appears on the screen, release the Power key.
Immediately after releasing the Power key, press and hold the Volume down key.
Force Reboot
Press and hold the Power + Volume Down buttons for approximately 10
Pre Install/Install Instructions
1. Donwload and unzip ODIN_ADB_G930_CRF1_ALL_CARRIERS.zip. If not on CRF1 Oreo firmware download and unzip G930TUVU4CRF1_G930TTMB4CRF1_TMB.zip
2. Use the odin thats located in the ODIN_ADB_G935_CR**_ALL_CARRIERS folder in the Odin_Firmware folder
3. In Odin select the AP, BL, CP and CSC files from the G930TUVU4CRF1_G930TTMB4CRF1_TMB and put them in the corresponding Odin slots In the Pit file tab in odin select the HERO2QLTE_USA_VZW.pit no matter what carrier you are.
4. Select start in odin. You will loose your data and files on internal storage
5. You do not need to go through setup of stock firmware as you are wiping again. So as soon as odin is done flashing and phone reboots and finishes recovery install
and reboots you can immediately reboot too download mode and continue too install instructions 1
Install Instructions
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
4. As soon as phone powers off hold buttons to reboot to recovery
5. Once in recovery run xxx_FlashSystem.cmd
6. Phone will reboot to download mode
7. In BL slot in odin flash BL_G935_CRF1_DELETE_CACHE.tar
8. Phone will automatically reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will automatically reboot to recovery
14. Once in recovery you will see a bunch of red lines saying failed to mount cache. Scroll down and select wipe cache then reboot too bootloader
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot but it will not automatically reboot to recovery you must do this manually. As soon as phone powers off hold buttons to reboot to recovery
18. When in recovery you will get the no command error then after a few you will get recovery options at this point wipe data and reboot to setup phone
19. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
To Enter And Exit Safestrap
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ODIN_ENTER_SAFESTRAP_G93*.tar
4. Let Phone reboot and enter safestrap
5. Too leave safestrap click reboot phone and hold buttons to reboot to download mode
7. In BL slot in odin flash BL_G935_CRF1_DELETE_CACHE.tar
8. Phone will automatically reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will automatically reboot to recovery
14. Once in recovery you will see a bunch of red lines saying failed to mount cache. Scroll down and select wipe cache then reboot too bootloader
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot but it will not automatically reboot to recovery you must do this manually. As soon as phone powers off hold buttons to reboot to recovery
18. When in recovery you will get the no command error then after a few you will get recovery options at this point wipe cache and reboot
19. After leaving recovery. If you have white boot animation all went well.
20. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
Old Downloads
ODIN_ADB_G930_CRE4.zip
Odin Files
G930AUCU4CRE4_Oreo.zip
Old Pre Install/Install Instructions
1. If not on CRE5 Oreo firmware download and unzip G93*VVRU4CRE5_8.0_4File_USA (Verizon).7z Unzip ODIN_ADB_G93*_CR**.zip
2. Use the odin thats located in the ODIN_ADB_G93*_CR** folder in the Odin_Firmware folder
3. In Odin select the AP, BL, CP and CSC files from the G93*VVRU4CRE5_8.0_4File_USA (Verizon) and put them in the corresponding Odin slots
4. You will loose your data and files on internal storage
5. You do not need to go through setup of stock firmware as you are wiping again. So as soon as odin is done flashing and phone reboots and finishes recovery install
and reboots you can immediately reboot too download mode and continue too install instructions 1
Old Install Instructions
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
4. As soon as phone powers off hold buttons to reboot to recovery
5. Once in recovery run xxx_FlashSystem.cmd
6. Phone will reboot to download mode
7. In BL slot in odin flash BL_G93*_CR**.tar
8. As soon as phone powers off hold buttons to reboot to recovery
9. Let recovery bootloop at least once
10. Hold buttons to reboot to download
11. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
14. Once in recovery if this is your first time installing you must run xx_AddCache WipeData.cmd. If your reinstalling and want to keep data run xx_AddCacheWipeCache.cmd
15. Phone will reboot to download mode
16. In BL slot in odin flash BL_G93*_CR**.tar
17. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
18. When recovery is done phone will reboot. If you have white boot animation all went well.
19. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
To Enter And Exit Safestrap
1. Make sure phone is plugged into computer
2. Make sure phone is rebooted to download mode
3. In BL slot in odin flash BL_ODIN_ENTER_SAFESTRAP_G93*.tar
4. Let Phone reboot and enter safestrap
5. Too leave safestrap click reboot phone and hold buttons to reboot to recovery mode
6. Once in recovery run x_DeleteCache.cmd
7. Phone will reboot to download mode
8. In BL slot in odin flash BL_G93*_CR**.tar
9. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
10. Let recovery bootloop at least once
11. Hold buttons to reboot to download
12. In BL slot in odin flash BL_ENG_BOOTLOADERS_G93*.tar
13. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
15. Once in recovery run xx_AddCacheWipeCache.cmd
16. Phone will reboot to download mode
17. In BL slot in odin flash BL_G93*_CR**.tar
18. Phone will reboot as soon as phone powers off hold buttons to reboot to recovery
19. When recovery is done phone will reboot. If you have white boot animation all went well.
20. If phone does not boot up after 10 minutes reboot to recovery and wipe cache. If this don't work then reboot back to recovery and wipe data
Bugs:
DO NOT USE ENCRYPTION
Safestrap is still beta so there are some bugs
All reboot options in safestrap only reboot the phone.
Safestrap rom slots do not work dont mess with
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap Main Thread Here Consider a donation to him he worked along time on this Donation Link
- @me2151 for finding this method
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for xposed on non rooted
- @partcyborg for finding the root method!
- @elliwigy for being great help and original S8 root
- @rayan-refoua for boot animation
- @FatalONEM8 - For posting Oreo OTA
- @stang5litre
- @jds3118
- @Krog18
- @klabit87 for S7 Safestrap
echoe rom and noname rom
stang5litre Test Group
Click to expand...
Click to collapse
SafeStrap Flashable Zips
Remove FRP Protection Safestrap Flashable Zip
SS_Remove_FRP_S7.zip
Directions For FRP
So if your stuck and dont know google account info Do the samfail process when all done flash file to enter safestrap once in safestrap mount and unmount system then flash SS_Remove_FRP zip then follow direction to leave safestrap. After your phone reboots from recovery the last time force phone back to recovery wait until options come up and wipe data and you can now enter new google account in setup or skip
Google Pixel Style With Samsung Apps Replaced With Google Apps
Google_Style_With_Build_prop_Tweaks_V4.zip (Slightly Debloated)
Data Wipe is recommended to get full effect
If you flash one of the google mods make sure to set default dialer in settings/apps to google dialer
If Gboard dont show update the app in playstore or apk mirror then in playstore uninstall the update then it will work
Extreme Aroma based debloater for S8/S7/S9 devices by OrelMadK
https://forum.xda-developers.com/galaxy-s8/themes/4-2-18-extreme-aroma-based-debloater-s8-t3744608
This aroma debloater probably one of the best I have seen by @orelta
The above zips cannot be undone If you want to go back to stock you would need to do the Install process over but you shouldnt need to wipe data this time
Xposed Framework Installer zip
xposed-v90-sdk26-arm64-beta3.zip Flash In safestrap
Xposed Installer APK
XposedInstaller_3.1.5.apk Install as normal apk then open app make sure framework is installed (the box will be yellow) then reboot open and box will be green showing its working
Recommended Xposed Modules
Xtended-Settings.3.1.7.apk
GravityBox-O.8.2.0.apk
Firefds-Kit-Oreo.0.1.0.0.apk
Xposed Uninstaller zip
xposed-uninstaller-20180117-arm64.zip
Dual Speaker Mod
Dual+Speaker_Oreo-8.0-Compatible.zip Flash In safestrap
Dual+Speaker_Return_TO_Stock.zip
Rom Control-Access To Some Hidden Settings
RomControl.apk
Host AdBlocking
Host_AddBlocking.zip
Remove_Host_AddBlocking.zip
Credits
- @rovo89 for xposed Main xposed thread
- @IDan1109 base of debloat script
- @EmperorEye for some build.prop tweaks script
Links live
Hello, looks like missed step in the "To Enter And Exit Safestrap" part of instruction. We need to enter recovery between 17 and 18 to wipe cache.
abyss7 said:
Hello, looks like missed step in the "To Enter And Exit Safestrap" part of instruction. We need to enter recovery between 17 and 18 to wipe cache.
Click to expand...
Click to collapse
Yes I will fix that sorry
Thanks for your work.
Could you briefly explain:
- what if I do not need Safestrap, can I just replace step 5 of installation instruction on my own modification? or there is something significant in xxx_FlashSystem.cmd ?
- Is adspso.bin really necessary in BL_G930_CRE4.tar? It is component of modem. I'm using modem from Verizon and I will have to reflash it every time I'm flasing BL_G930_CRE4.tar
abyss7 said:
Thanks for your work.
Could you briefly explain:
- what if I do not need Safestrap, can I just replace step 5 of installation instruction on my own modification? or there is something significant in xxx_FlashSystem.cmd ?
- Is adspso.bin really necessary in BL_G930_CRE4.tar? It is component of modem. I'm using modem from Verizon and I will have to reflash it every time I'm flasing BL_G930_CRE4.tar
Click to expand...
Click to collapse
Why are you using verizon modems on att firmware rom. The only thing that accomplishes is making none of your samsung stuff work like pay, pass , etc
jrkruse said:
Why are you using verizon modems on att firmware rom. The only thing that accomplishes is making none of your samsung stuff work like pay, pass , etc
Click to expand...
Click to collapse
Yes, I want to use that samsung stuff, but carrier aggregation does not work with ATT modem. And what about my questions?
abyss7 said:
Yes, I want to use that samsung stuff, but carrier aggregation does not work with ATT modem. And what about my questions?
Click to expand...
Click to collapse
Safestrap is custom twrp recovery. If you feel you can change scripts and get stuff how you want too, go for it. That's how new ideas are created
jrkruse said:
Safestrap is custom twrp recovery. If you feel you can change scripts and get stuff how you want too, go for it. That's how new ideas are created
Click to expand...
Click to collapse
Before you posted this thread, I tried to do the same inspired your Verizon thread, but with no luck. Just could not make recovery bootloop, got only dm-verity failed.
I understand, you've made the great work, and I appreciate it. Could you please share small piece of your knowledge, what causing this bootloop that delete dm-verity key? deletecache.img?
abyss7 said:
Before you posted this thread, I tried to do the same inspired your Verizon thread, but with no luck. Just could not make recovery bootloop, got only dm-verity failed.
I understand, you've made the great work, and I appreciate it. Could you please share small piece of your knowledge, what causing this bootloop that delete dm-verity key? deletecache.img?
Click to expand...
Click to collapse
If you want to add files stick them in the system folder if you want to delete stuff mod the sys.cmds file all the .cmd files with x in front of name dont change
If I do not need safestrap I can safely remove ./system/etc/safestrap/ folder, right?
abyss7 said:
If I do not need safestrap I can safely remove ./system/etc/safestrap/ folder, right?
Click to expand...
Click to collapse
No
Edit_Actually you could and also remove bin folder and the vendor folder from the system folder. Then in sys.cmds remove the permissions ro safestrap and the fstab.qcom e2fsck files
Just flashed this working great no lags noticed thank you. Just wondering what I should try to flash with safestrap. I'd love to figure out how to have native outdoor mode.
Just added some zips that can be flashed in safestrap on post 2
SamGuy2020 said:
Just flashed this working great no lags noticed thank you. Just wondering what I should try to flash with safestrap. I'd love to figure out how to have native outdoor mode.
Click to expand...
Click to collapse
Post # 2 RomControl app is what your looking for
Hello,
I'm not sure if I'm understanding your enter/Exit Safestrap instructions correctly but it reads like we have to flash a file in odin everytime we'd like to boot to recovery to use safestrap?
Thank you for your further development of the LOCKED! SG930A variant. I just came back to android after doing a nickel with the iphone. It was like prison.
So does this mean we have root for oreo? Eng_booloader ?
Xposed?
Anyone trying magisk ?
---------- Post added at 02:17 AM ---------- Previous post was at 02:07 AM ----------
https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
miko12312 said:
So does this mean we have root for oreo? Eng_booloader ?
Xposed?
Anyone trying magisk ?
---------- Post added at 02:17 AM ---------- Previous post was at 02:07 AM ----------
https://forum.xda-developers.com/android/software-hacking/root-recovery-root-device-magisk-t3779454
Click to expand...
Click to collapse
Magisk doesn't work with the S7 USA version
Rick1488 said:
Magisk doesn't work with the S7 USA version
Click to expand...
Click to collapse
I know that so far , since were messing with a whole new OS, but like the safestrap that has been injected into the rom, there is some other ways of using magisk like the one I have posted yes it does still check booloader but if we can bypass that or use magisk on a different partition we may find a way as su system install is not really supported anymore it's all now systemly ,but reading the forum there is some kind of root as it's possible to use xposed
Work only on Oreo 8
You must be Stat Normal
Oem Unlocked
Enable USB Debugging Mode and OEM Unlock in your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy J7 Duo.
Download and install the Samsung USB driver to your computer system.
Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN in your PC.
Download Magisk.Zip (Download Latest version) and forced encryption disabler, Copy it to Your Phone Memory. We Need to flash encryption disabler to avoid Boot Warnings in the future after the Root process.
Download and save the TWRP File. Select Correct TWRP file from Below. This TWRPs can support Up to Oreo.
SM-J720F
SM-J720M
Flash TWRP using ODIN
Samsung Galaxy J7 Duo Download Mode
Connect your USB Cable with PC. Switch off your device. Then, enter into Download mode. To do this; press and hold down the Volume Down + Home + Power buttons and connect your micro USB Cable.
Samsung Galaxy J7 Duo Download Mode Warning Screen
Press the Volume Up button to continue when you see the warning message.
Now, connect the Samsung Galaxy J7 Duo mobile to the computer via USB cable.
Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!
ODIN Added Message
However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is reasonable and reconnect the device.
After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and tick the Auto Reboot.
Odin Auto Reboot
Click on “Start”
Once the file is loaded into the device, reboot your device.
Kudos, you have just Installed the TWRP on your Samsung Galaxy J7 Duo. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps.
You should not Boot into Normal OS Booting, after TWRP. After TWRP Flash, Immediately Boot into Recovery or twrp will gone
Boot it Into recovery mode->Volume Up + Power Button.+Home
Now it Will Boot into TWRP Recovery Mode.
Install Magisk, forced encryption disabler in your Samsung Galaxy J7 Duo using TWRP
Select Wipe->Advance Wipe->Select Cache Data.
Return to Home of TWRP select Install.
Select Magisk.Zip.
After Installation again Navigate to Home select Install. Select forced encryption disabler.
After the Installation Reboot Your Mobile.
You can also install Magisk.apk in your Mobile Applications. Forced encryption disabler is used to avoid the boot loop issue after rooting.
enjoy
SM-J720F
SM-J720M
encryption disabler
Samy6699 said:
Work only on Oreo 8
SM-J720F
SM-J720M
enjoy
SM-J720F
SM-J720M
encryption disabler
Click to expand...
Click to collapse
Can it be used on the Dual-Sim version SM-J720F/DS released in 04/2018 ?
Can i install it on Galaxy J7 Duo running Android pie
Nitin devarasetty said:
Can i install it on Galaxy J7 Duo running Android pie
Click to expand...
Click to collapse
i also need that man.
Please make one thing clear
Do we have to turn off "Auto reboot"
Or keep the "Auto reboot" option checked on?
Android 9.0
Hello, when it will be possible ? If never, why ?
I followed the exact process but everytime i tried to boot into TWRP recovery immediately after the flashing, the device still boots into stock recovery instead of TWRP
Please help me with this
Thank you
I figured out a way to root the Galaxy J7 duo
Actually i have tried lot of ways to root using TWRP flash and all.. but one day i accidentally bricked my device
So i downloaded the stock ROM to flash my device
And i downloaded the 8.0 android ROM
So this root method basically tested on android 8.0
So now i have android 8.0 stock ROM downloaded
Step 1 -
So make sure you also downloaded the ROM
And extract the ROM file (you must have got the "AP" "CP" "BL" "CSC" and "HOME CSC" file)
Then copy the "AP" file in your phone
Then install magisk manager in your phone
Open magisk, select install, select and patch a file from magisk
Then select "AP" file
And wait while magisk is patching the "AP" file
When flashing is done the patched file will be saved on storage, emulated, 0, download (file will be saved as "magisk_patched.tar")
Then simply copy the patched file in your computer
Step 2 -
Open odin in your Computer
In odin, select "magisk_patched.tar" in "AP" section
Select "BL" from the stock ROM folder in the odin's "BL" section
Select "CP" from the stock ROM folder in the odin's "CP" section
Select "HOME CSC" from the stock ROM folder in the odin's "HOME CSC" section
make sure you select all the official files from the stock ROM folder... just instead of the "AP" file, select the "magisk_patched.tar"
Then connect your phone via USB cable
Odin will detect and show "added" message
Start the flashing process
It will take few minutes
When its done your phone will boot up
But it will show something like "erasing" and "verification unsuccessful"
Just agree with that and erase the phone
(It will cause a data loss because everything will be deleted and your phone will reset, so i suggest to make a backup using samsung smart switch)
Then when your phone will reboot, just follow the steps to setup
Amd install magisk latest apk
Open magisk and boom!
You can already realize that magisk root is activated
Amd magisk will ask you to "setup environment"
Just agree and your phone will reboot withing 5 seconds
And done!
Your phone is now rooted
Install root checker and verify your root status
how to un-brick
Same thing here,
Tell me how you un-bricked your phone
I bricked my phone by installing wrong twrp file to sm-j720f android pie with odin
and now it shows only bootloader screen and I can't even go to recovery mode or home screen just showing " SAMSUNG GALAXY J7 DUO secured by Knox powerd by android" noting else
That is exactly what was happened in my phone
So what i did just downloaded the Stock ROM for J7 duo from the sam mobile website.
Then extract the ROM and you will get few files ("AP", "BL", "CP", "CSC", "HOME CSC")
Then boot your phone into download mode using this method
(Connect the phone to your PC using USB cable, then press and hold Power + volume down + home, then when the "powered by android" logo appears release only the power button... so your phone will boot into download mode, press volume up to continue)
Now, in odin you can see "added" message that means device is connected
Now select the ROM files respectively, BL, AP, CP, CSC
Then click start, and the process will start, will take few minutes
When done, your phone will boot normally
Yeah everything is right until...
[grand_theft;83142325]That is exactly what was happened in my phone
***********
So what i did just downloaded the Stock ROM for J7 duo from the sam mobile website.
Then extract the ROM and you will get few files ("AP", "BL", "CP", "CSC", "HOME CSC") *********
Then boot your phone into download mode using this method
Fact that I cant even go to download mode I tried out many times
Just follow this step
(Connect your computer with your phone using USB cable, then press and hold Power + volume down + home, then when the phone vibrates and appears the samsung logo again just release only the power key, while holding the volume down and home key)
(Just release only the power key when the "powered by android" logo appears)
Thats how you can go to the download mode
No virtual change
Done it as u say,
But my mobile shows noting but just logo screen
*****SAMSUNG GALAXY J7 DUO secured by Knox powered by android*****
again and again
These is not first time, last I did the same mistake before and I went to Samsung service store they recovered it, I don't know how they did but it worked.
These time I want to (tring to) do it on my own bcoz I love playing with ROM's, root, etc.
Thanks for replys
I also did the same mistake by flashing wrong TWRP
But however i managed to enter into downlod mode following those steps
And flashed official ROM to unbrick the phone
You must go into download mode to flash the official ROM using odin
Thanks alot
Thanks man,
I'm able to enter download mode and I installed official ROM. Now in using it as normal but (1)Secure folder and Pay mini are not working.
(2)Do you have any idea on other ROMs that works on SM-J720F other than Samsung's one UI.
(3)can I install android 8 on it in ordered to root as you said it in previous post.
(4)from previous your post on oreo twrp explanation, is twrp works fine. What happens to twrp if I update phone to Q (from system updater)
I'm glad you made it!
Now,
1) Secure folder and pay mini won't work because the phone thinks you rooted your phone and maybe your binary is cracked (so forget using those)
2) I'm not sure about any ROMs which is stable with this model. But you can search the internet (I think pixel ROM is pretty popular)
3) I'm not sure if my process of rooting supports android 9.0 or not, because i personally tetsted it on 8.0, So you can download the oreo ROM from the internet and then follow all the steps i mentioned before
4) If you want to install TWRP, you can still install TWRP after rooting via the method i provided
(You can install TWRP using flashify on a rooted phone)
But if you want root access then you can simply root your phone first..
And whatever custom ROMs you want to install, install it using flashify
Because if you update software via official OTA, the root access and TWRP both will be gone
And if you root your phone, then however you won't be able to perform a official OTA update.
(First root your phone, then simply download your TWRP file and flash it with root permission within your phone)
Instated of Oreo AP file,
grand_theft said:
I figured out a way to root the Galaxy J7 duo
Actually i have tried lot of ways to root using TWRP flash and all.. but one day i accidentally bricked my device
So i downloaded the stock ROM to flash my device
And i downloaded the 8.0 android ROM
So this root method basically tested on android 8.0
So now i have android 8.0 stock ROM downloaded
Step 1 -
So make sure you also downloaded the ROM
And extract the ROM file (you must have got the "AP" "CP" "BL" "CSC" and "HOME CSC" file)
Then copy the "AP" file in your phone
Then install magisk manager in your phone
Open magisk, select install, select and patch a file from magisk
Then select "AP" file
And wait while magisk is patching the "AP" file
When flashing is done the patched file will be saved on storage, emulated, 0, download (file will be saved as "magisk_patched.tar")
Then simply copy the patched file in your computer
Step 2 -
Open odin in your Computer
In odin, select "magisk_patched.tar" in "AP" section
Select "BL" from the stock ROM folder in the odin's "BL" section
Select "CP" from the stock ROM folder in the odin's "CP" section
Select "HOME CSC" from the stock ROM folder in the odin's "HOME CSC" section
make sure you select all the official files from the stock ROM folder... just instead of the "AP" file, select the "magisk_patched.tar"
Then connect your phone via USB cable
Odin will detect and show "added" message
Start the flashing process
It will take few minutes
When its done your phone will boot up
But it will show something like "erasing" and "verification unsuccessful"
Just agree with that and erase the phone
(It will cause a data loss because everything will be deleted and your phone will reset, so i suggest to make a backup using samsung smart switch)
Then when your phone will reboot, just follow the steps to setup
Amd install magisk latest apk
Open magisk and boom!
You can already realize that magisk root is activated
Amd magisk will ask you to "setup environment"
Just agree and your phone will reboot withing 5 seconds
And done!
Your phone is now rooted
Install root checker and verify your root status
Click to expand...
Click to collapse
************************************************************************************************************************************************************************************************************************************************************************************************************
Ok I agree with you,
But what if I replace Oreo's AP file with android 10's AP file(which I installed recently on my phone), will it boot with root or not.
************************************************************************************************************************************************************************************************************************************************************************************************************
I have not tested this method on any other android version, you can still try it on your own, there is nothing to lose, just make a backup before flashing. If you succeed then that's great
But i have personally tested this method only on android 8.0
(Before doing anything, just make a proper backup using samsung smart switch. So you can restore your important data)
Success
Replaced with android 10's AP file and flashed with Odin. Now my phone has rooted with Magisk manager.
Any suggestions to tweak android
Claudio4780 said:
Can it be used on the Dual-Sim version SM-J720F/DS released in 04/2018 ?
Click to expand...
Click to collapse
Have you ever got the answer or figured it out? I've got the same model and I cannot find anything on the net to help me with rooting this phone.
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
stylemonument said:
Please I can't seem to unlock my bootloader because OEM Unlocking functionality is missing on my device. I have tried and still can't find it. Can I root the device without Unlocking the bootloader?
Click to expand...
Click to collapse
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Please see here: Bootloader Unlock Service For US Variants
BoiBundy said:
If you could just download and install Telegram app and PM this guy on there (drivel2787)
Click to expand...
Click to collapse
Okay.... let me do that. Thanks.
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Msgd re: oem unlock! Btw, if we got any awesome Sam sec experts out there who wouldn’t mind entertaining some qs from me regarding a lot of WEIRD stuff happening w my phone, be eternally grateful. Could even work out a monetary deal for your time, and (perhaps) help!
Thanks much in adv, msg on telegram as @nemotheDreamer.
butchieboy said:
Maybe should include that US Snapdragon will have to get their bootloader unlocked first and how they do..include Telegram. Or your probably going to constantly get the "I can't find OEM unlock" question.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
You might be right, I will edit it tonight
So we can legit root the Snapdragon version now?
Nickdroid86 said:
So we can legit root the Snapdragon version now?
Click to expand...
Click to collapse
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
cerj said:
Yes, it's been going on now for a few months. I've done it myself. It's completely legit
---------- Post added at 09:49 AM ---------- Previous post was at 09:47 AM ----------
Nice Tut BoiBundy, well written.
Click to expand...
Click to collapse
Thanks man, wanted to have a central "fool-proof" way for people to enjoy the freedom of root
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
MonkeyJug said:
Just to be clear - I need to pay to get my bootloader unlocked? That's still the case, right?
Click to expand...
Click to collapse
Check Here: https://forum.xda-developers.com/t/sampwnd-usa-model-bl-unlock-info-u-u1-w.4201689/
I've been on Nexus and Pixel devices so long now I cannot remember much about modification on Samsung devices. Last one I had rooted was the Note 2. Anyway, bootloader unlocked and successfully rooted my SM-N975U (Note 10+). Now there are updates available so I am sorry if this isn't the place or if a dumb question, but is there any special way I need to do updates on the snapdragon so I don't relock the bootloader or lose root? With Pixel, ADB sideload was easy, not sure with this one.
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
nabnab25658 said:
Is there a multi disabler package that is compatible with the SM-N976V ? I have tried multiple iterations of multidisabler-samsung-2.6c-afaneh92 but am have trouble.
Click to expand...
Click to collapse
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Dick_Stickitinski said:
I was in the same boat, went to the telegram channel and the guy who made that file added support for 976V. Not sure where else it's available, but you should be able to get it there from Mohammad.
TWRP for S20/N20/TabS7/ZFold2 (Snapdragon)
t.me
Click to expand...
Click to collapse
Hey, just wanted to thank you for pointing me in the right direction. I've had my Sm-976V BL unlocked and rooted for a bit now, but have been busy hence the late reply.
I have an issue. I boot into TWRP just fine but all my files in sdcard are nothing but random numbers and letters
I think this happens when you don't wipe your data. You also need to flash a decryption file. It happened to me at first because I didn't wipe all data.[/QUOTE]
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
which TWRP version to flash and which odin? hope i can get answer i had N975U1 unlocked bootloader
Anyone else getting that pesky "Android 11 Update" since they have rooted? I keep postponing it. I'm guessing it will fail if I try to install. Not sure what I should do.
Sammobile don't seem to have the firmware available yet. I was thinking installing it with odin then patching AP with Magisk
BoiBundy said:
[28NOV20][Guide] How To ROOT ALL US VER. NOTE 10(+) & Flash TWRP (SnapDragon Only)
Step by Step: How to Root & Flash TWRP on Samsung Galaxy Note 10(+) and Every other Galaxy from S10 and up (SnapDragon Only)
Update: If You Want To Unlock Your Bootloader go here: U.S. Samsung Galaxy Bootloader Unlock Service
So You Figured Out How to Unlock The Bootloader on your Shiny New/Old (Snapdragon) Samsung Galaxy Thing-a-ma-jig
Good on you, but now you want to figure out how to Root properly and enjoy the spoils of said Unlock. Well You've come to right place.
DO NOT QUOTE THE OP PLEASE, (If you would like to place this guide in your respective Device Threads ie. Galaxy s10, s20, s20 Note 20 Ultra 5g etc. thats perfectly fine)
Welcome: Be nice, be courteous and *enjoy
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with unrooting, some functions may never.
- All your data on device will be lost (Factory Reset is in the Instructions below)
- Flashing custom binaries may brick (Usually it's a soft but can be hard brick too), so follow it on your own risk!
Now that you accept the risks, let's have some fun -
Important: Although this is a simple guide you must follow all directions clearly
Simple guide to root your device and install TWRP after unlock: (Thanks to @Krog18 )
1. Download vbmeta_disabled.tar, TWRP for your device, magisk and multidisabler-samsung-2.6-afaneh92
2. Reboot to download mode and flash vbmeta_disabled.tar in ap slot and reboot. Device will reboot to recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
3. Uncheck auto reboot in Odin and flash TWRP in ap slot.
4. Hold volume down and power until the screen goes black then immediately switch to holding volume up, Bixby button (10 series only) and power to reboot into TWRP
5. Flash multidisabler and reboot recovery
6. Go to wipe, format and type yes to format data
7. Flash magisk
8. Make a backup of efs and store it somewhere safe
9. Reboot
*First boot may take 10-15 minutes. If it doesn't boot in 15 minutes, force reboot by holding power and volume down for at least 10 seconds
Additional Method For Rooting If Above method did not work for you:
Step 1 : (Root Base Firmware with Magisk By patching files yourself, Then Flash TWRP in Odin)
Prepare Firmware files for root
You need to Patch AP File to flash using Odin to root device.
1. Download stock firmware for your device ie (SM-N975U/U1, SM-G973U/U1, SM-G975U/U1)
You need to download file according your region and model.
2. Once you finish download, extract files and keep all files on in a folder on the desktop of PC. From extracted files find the file with name AP_[device_model_sw_ver].tar.md5 copy to your Phone.
3.Download Latest Magisk Manager and Install to your device (Make sure to check for updates) (Optionally go into settings and switch the update channel to BETA)
4.Open Magisk Manager - Find Magisk Install (Top One) - Click Install - select to "Select and Patch file" - Click the AP file you have copied to your device (AP_[device_model_sw_ver].tar.md5)
5.Magisk Manager will patch the entire firmware file and output the newly Patched AP file to [Internal Storage]/Download/magisk_patched.tar
6.Now Copy patched AP file magisk_patched.tar back to Your PC
7.Download latest Odin and extract to Desktop on your PC
Step 2. Installing custom firmware files with Odin
1. Reboot to download mode and select volume up to continue:
2. Open Odin (as administrator) {Right-Mouse click--Open As Administrator}
Select AP in Odin and use the magisk_patched.tar file you have patched {The file you just patched with Magisk} for AP tab of Odin
Select BL,CP and CSC files (Use the files from the firmware you downloaded earlier) (This is VERY important, DON'T just flash only the magisk_patched.tar)
(Use All of the respective files BL, CP, CSC)
3.From Odin option - uncheck Auto Reboot option (I do this because I like rebooting when I'm ready)
4. Make sure all files are in the right place, Now Hit Start and wait till it's completely finish. When It shows PASS in Odin, disconnect device.
Okay Now the hard part is over, you can let the phone boot to system and Skip all Setup Steps because Next is TWRP.
Step 3. Odin: Flash Twrp and Boot with Magisk
Very Simple yet very Important:
1. Download the respective TWRP (Twrp<version_number>.TAR for you phone model (This is going to Odin flashed so you need .TAR file)
2. Reboot your phone into Download Mode, Hold Vol- and Power Button until it gets to DL Screen and press up for "Yes"
3. Put the Twrp<version_number>.TAR in the AP slot
4. Make sure the file is selected, (Unselect Auto-reboot in options tab in Odin) and in place and hit Start
5. Wait until it's finished, Now Hold Vol- and Power until you see black screen, release and then hold Vol+ and Power until you see TWRP recovery
Now Flash Multidisabler and Magisk
1. Flash multidisabler (Mega) (Google Drive) and reboot back to TWRP
2. Wipe data and storage
3. Flash Latest Magisk
*Enjoy
*** Remember: Make a backup of EFS through TWRP and save it to your desktop or Cloud service ie. MEGA, GDrive, Dropbox ****
Click to expand...
Click to collapse
it works on my N975U1 android 10 Q version 1st method so no need 2nd method