Hi,
I was flash new version rom 2.0.8i and I boot into recovery , but I wipe all partitions....
and I reboot try to use tool-partition-repairscripts-for-oppo-find7-find7a
this tool to repair my partition, I boot into fastboot mode and run the tool , after almost 10 min my find7 has no response.
I remove the bettery and replace it, try to reboot again.
Now when I press power, it vibrate but no screen, just like not power on.
(tried to press vol+ and vol- , not work!)
How should I do to repair my Find7..... please help!
update.
When I press power and vol+ , plug usb to my computer
I found a new device named "ZEUS Flash Device"
Can I repair my find7 by this interface?
update 2.
after study, I found some post about "bricked"
I think I bricked my Find7.
So I tried to repair by some post like "guide-how-to-recover-your-bricked-find-7-7a.23067"
I got 2 device driver installed perfectly. (9008/9006??)
But when I reconnect and start the fix program, it stuck!
I can see a new "DISK DEVICE" in my windows disk manager.
But nothing happen in the fix program..
I wait over 5 min, and I give up.. (Almost AM4:00.. I need to work on AM7:00 OMG)
Today I will tried again to uninstall drivers and reboot windows , reinstall driver..
hope I can save my Find7..
BTW, I have other one smartphone and it is sony, so I have installed the driver for it, and the device interface called ZEUS...
So i was using my phone and decided to restart it after updating my adaway files but my phone never turned back on. The two press the power button screens did not show up either. I tried to uses the MSMdownload tool since i thought my phone was somehow bricked but that didnt work either, it just kept restarting the download process after everything was completed. my computer makes a sound when its connected and it connects correctly as a quallcomm 9008 device but even after all this nothing is working. has anyone experienced something like this or does anyone have any advice?
did you try to long press both power button and vol up ...you should feel a vibration...
maybe it's not turned of maybe it's error causing the screen to be off... also is there any heat?
Which method of the unbrick tool did you use? First or second? If the first, then maybe you should give the second also a try.
Sent from my ONEPLUS A3003 using Tapatalk
I've tried everything and I used th me second method yet nothing happened. I can see my phone get recognized by the computer and get listed on the MSN device list yet nothing happens after it finishes the process. After the green line shows up telling me that it's completed everything the process restarts writhing a few minutes unless I unplug it. No vibration no nothing the phone just died on me after I restarted it .
Try doing MSM on a different PC with all drivers installed , hope it helps
Try to repeat flashing again, there is no other way. Use method 2only. Extract tool again and try flash.
When I was used Xperia Z1, I bricked my phone with a soft brick. So I installed driver in my PC and flash Kernel though FASTBOOT(ADB) either it's not show Device in my PC (I show just "Unknown Device").
After that my phone can connect to my PC again (Now It shown C9303 or something that meant it know it's a phone).
So I can flash by Flashtools again. Soft brick is not scary as Hard brick, you'll find some way to bring it back easily.
Hope this help!
PS. Bricked Phone is WEAK in Battery, always connect it with charger.
Greetings,im Akmal and today I will be sharing some helpful solution to unbrick your Oppo Find 7/7A.Short Story(myb a lil bit longer)¬
So my find 7A got soft bricked when I install custom rom without using TWRP(pretty stupid to do so)
After rebooting my phone keeps on booting to fastboot mode and no matter it happen the same if i press vol up/vol down and power button.
At this stage I knew my phone is soft bricked.So I found the solution to it through some old posts which you have to extract the ColorOS blablabla and adb thingy(I dont wanna go through it here)
But I dont realised that i forget to flash a file name "TZ.MBN"
Now that my phone wont ever boot or even to fastboot which resulted to hard brick.
No recovery screen.
No Charging status screen
No Fastboot screen
No sign of vibrating when i push the power button
-So here is the solution-
Disclaimer-I am not responsible for what ever happen to your device after this-
-there are already some other posts like this but I make this post to let you know that its still working.
1a)First,download the OPPO UNBRICK TOOL HERE
bit.ly/OPPOUNBRICK
1b)goto Google and search for Qualcomm qd loader.download,install and restart your pc.
2)After restarting,Extract the file from OPPO UNBRICK TOOL and open "Msm8974DownloadTool.exe"
3)as you may have notice,its chinese language or some aliens language but dont worry it isn't corrupted,just follow through↓
4)disconnect your device battery,then open the software and press start,after that connect the phone to your pc/laptop (WITHOUT BATTERY) and hold volume up button
5)please wait patiently as it is reflashing stock rom to your device.
6)as you may have noticed maybe your device disconnected but DONT GET PANICKED! press again the power button until its downloading again on the software.
7)If it has done downloading,some row should be in a Green colour.
8)disconnect your cable and try turning on your device again.
That's it!Any comment or curiosity I will try helping you through the comment section but I not guaranteed everything I can answer
P/S:if your device is softbricked,you just should disconnect your battery,and then open the software and press start,then connect the phone to your pc/laptop (WITHOUT BATTERY) and hold volume up button.
If your device is hard bricked(like mine)only holding the power button could work as well
*UPDATE* 24/2/2019
-If you guys still have any concerns kindly contact me through twitter (0728mal)
*UPDATE* 4/7/2020
-yes it is still working guys,no worries kayy
-no you don't need internet for it to work,the software already has all the files needed to flash the device,which is why the file is pretty big.
best regards,
Akmal
Link updated :good:
akmlfhm said:
Greetings,im Akmal and today I will be sharing some helpful solution to unbrick your Oppo Find 7/7A.Short Story(myb a lil bit longer)¬
So my find 7A got soft bricked when I install custom rom without using TWRP(pretty stupid to do so)
After rebooting my phone keeps on booting to fastboot mode and no matter it happen the same if i press vol up/vol down and power button.
At this stage I knew my phone is soft bricked.So I found the solution to it through some old posts which you have to extract the ColorOS blablabla and adb thingy(I dont wanna go through it here)
But I dont realised that i forget to flash a file name "TZ.MBN"
Now that my phone wont ever boot or even to fastboot which resulted to hard brick.
No recovery screen.
No Charging status screen
No Fastboot screen
No sign of vibrating when i push the power button
-So here is the solution which make my phone came to life again-
Disclaimer-I am not responsible for what ever happen to your device after this-
-there are already some other posts like this but I make this post to let you know that its still working.
-make sure to charge the phone first even if you do not know if it charging or not
1)First,download the OPPO UNBRICK TOOL HERE
bit.ly/OPPOUNBRICK
2)Extract the file and open "Msm8974DownloadTool.exe"
3)as you may have notice,its chinese language or some aliens language but dont worry its not corrupted,just follow through
4)Connect your phone to PC and press the power button until you heard some like mounted usb alert on windows.(its ok aslong windows does not detect it on device manager but its ok if you can hear the alert sound.
5)back to the software,no need to mess around with it.Click on start until its downloading a "new life" to your phone.
6)as you may have noticed maybe your device disconnected but DONT GET PANICKED! press again the power button until its downloading again on the software.
7)If it has done downloading,some row should be in a Green colour.
8)disconnect your cable and try to turning on your device again.
That's it!Any comment or curiosity I will try helping you through the comment section but I not guaranteed everything I can answer
best regards,
Akmal
Click to expand...
Click to collapse
hi im having this problem as well. my find 7a is hard bricked after i flash coloros v2.1.5i without twrp. the problem is, my computer does not detect my phone at all even after i hard reset and hold power button for 30 seconds. i dont think the battery is drained because before this happened, my phones battery was about 90% and i try recharging the phone for 30 minutes, and nothing happened. so the debrick tool cannot be used. can you suggest anything for my problem?
Got excited when I read this post! Is there an Oppo Unbrick tool for Mac? I don't have a Windows machine so I can't run the .exe file... Is there an equivalent for those of us not on Windows? Thank you
Shadician said:
Got excited when I read this post! Is there an Oppo Unbrick tool for Mac? I don't have a Windows machine so I can't run the .exe file... Is there an equivalent for those of us not on Windows? Thank you
Click to expand...
Click to collapse
On Mac's OS, you can always install Windows on its proprietary virtual machine and get the process going that way.
babyenchantress said:
hi im having this problem as well. my find 7a is hard bricked after i flash coloros v2.1.5i without twrp. the problem is, my computer does not detect my phone at all even after i hard reset and hold power button for 30 seconds. i dont think the battery is drained because before this happened, my phones battery was about 90% and i try recharging the phone for 30 minutes, and nothing happened. so the debrick tool cannot be used. can you suggest anything for my problem?
Click to expand...
Click to collapse
hello there!I'm really sorry for not checking this that often and really sorry if i let you down because im too busy with my schools work
btw before my computer can detect my phone i have to download a driver which detect qualcomm processor for my oppo then it can be detected by my pc therefore i can do the unbrick process:good:
Shadician said:
Got excited when I read this post! Is there an Oppo Unbrick tool for Mac? I don't have a Windows machine so I can't run the .exe file... Is there an equivalent for those of us not on Windows? Thank you
Click to expand...
Click to collapse
yeah you can try WINE also but i never have any experience with mac os before so i cant guarantee that it will work considering that you're configuring your drivers,which can go wrong if not done correctly
So I have bricked my phone (X9006) while trying to install TWRP recovery. It is stuck on logo and adb/ fastboot does not recognise it anymore. I have tried the above-mentioned tool, but this program also does not do anything for a long time. Am I missing something in applying this solution?
Edit: I am an Windows 10 and I might not have the Qualcomm drivers installed. I don't know how to install
true_friend2004 said:
So I have bricked my phone (X9006) while trying to install TWRP recovery. It is stuck on logo and adb/ fastboot does not recognise it anymore. I have tried the above-mentioned tool, but this program also does not do anything for a long time. Am I missing something in applying this solution?
Edit: I am an Windows 10 and I might not have the Qualcomm drivers installed. I don't know how to install
Click to expand...
Click to collapse
Hello there.have you tried downloading the "Qualcomm"
Driver software on your PC?
is it necessary to remove the battery? I don't have tools for opening my phone and it's battery is non-removable
Perhaps an important step is missing. The Qualcomm qd loader driver is may not signed. I had to boot into the extended start menu on Windows 10 and disable the driver signature check - point 7 - and could now successfully debrick my find7.
I'm currently trying to follow this guide on how to install Magisk: https://docs.google.com/document/d/1fdeO9jmm8ewwRX_G0MaGHsVfIVtxgh0yRK0-Yypcl_E/edit"]https://docs.google.com/document/d/1fdeO9jmm8ewwRX_G0MaGHsVfIVtxgh0yRK0-Yypcl_E/edit (I can't make the link clickable since it's my first post) but it's in poorly worded English and I'm not sure if I'm doing it right. I've gotten into download mode by turning the phone off, holding volume up, and connecting it to a PC via a USB cable. As far as I can decipher, the guide says to reboot into bootloader through ADB from there. Thing is, ADB doesn't detect my phone being plugged in, but I know my PC detects it because LGUP detects it just fine. I've also tried booting into the bootloader by holding volume down while plugging into a PC, but that just turns on the phone. Doing adb reboot bootloader while connected and on just restarts the phone. If it helps, I did manage to get it into recovery mode through adb reboot recovery, but all I get is a 'no command' error.
If any of you Android wizards could help me out, that would be great!
You should reflash firmware ULM11g to bring back fastboot; after that read carefully before do something
Hey all,
So i've unlocked by bootloader, flashed a custom recovery to then proceed with LineageOS flashing. However it went completely wrong as on reboot i'm stuck with the bootloader unlocked warning and then a blackscreen.
I still have access to fastboot mode however it's impossible to flash a customer recovery ("No Such Partition") and also impossible to directly "fastboot boot recovery.img" as the phone simply reboots on the warning and then blackscreen.
The only solution seems to get the device to qualcomm EDL mode and reflash all with the MSM tool (which I have as well as all the drivers) however I cannot get my Oneplus 9 pro to EDL mode...
I've tried all the fastboot commands (fastboot oem EDL, fastboot reboot EDL, none of them work) as well as the combination volume UP + volume DOWN + plugging the cable (it just boots the fastboot mode.
Honestly would greatly appreciate any help as it is the first time in a decade I hard bricked a phone like this as it seems all the partitions are broken.
Make sure you have it unplugged when you do the button combos, as it will just start to boot while it's plugged in. Also, if you can reach fastboot, you can almost definitely reach EDL. Try unplugging and holding power+vol up for a bit which forces it to completely power off. Then try getting into EDL through the normal button combo/plugging. This is what I had to do since once it got into the booting/no-booting cycle I couldn't get to EDL.
1] Make sure you have it connected directly to your computer via USB port rather than via a USB Hub, I've seen that cause the device not to show up in the device manager.
2] You might have to restart your computer with driver signing disabled, check here for instructions for that
3] I've uploaded the Qualcomm drivers here
4] Make sure you use POWER + VOL DOWN + VOL UP and watch your device manager to see if the device is there
5] Make sure you choose the correct MSM tool from here for your region/provider
6] Remember to use MsmDownloadTool V4.0.exe, choose "User type : Others" and choose the correct device/region under the top "Target" dropdown.
7] If you don't see any COM device showing connected then try changing USB port or rebooting the device back into EDL mode.
Good advice above.
Last time I couldn't reach EDL with my previous phone, it turned out to be an issue with the drivers I had installed. I uninstalled all Android-related drivers including some generic thing that showed up in device manager when plugging in the phone, then reinstalled the latest Qualcomm drivers.
Also possibly try a different USB cable if you have one. My OP9P didn't show up when the cable it came with was plugged into my USB-C port for some reason, but it worked fine with a generic Type-A to C cable I had sitting around.
Thanks a lot for the different guidelines !
i'm 100% sure the drivers are working. I have another oneplus 9 pro that is detected when booted on EDL mode on the PC. The faulty one however cannot reach it. Also it cannot get any charge as whenever I plug it on it just goes on a boot loop. Tried to leave it to charge for a full night but still shows the "out of battery logo" with the red cable.
When plugged to the PC while pressing VOLUME UP + VOLUME DOWN I keep getting the windows sound of device plugged/unpluged, etc etc...
To be honest I think the flashing messed up the partitions as it is now hard to do anything with this device...
Tornadeur said:
Thanks a lot for the different guidelines !
i'm 100% sure the drivers are working. I have another oneplus 9 pro that is detected when booted on EDL mode on the PC. The faulty one however cannot reach it. Also it cannot get any charge as whenever I plug it on it just goes on a boot loop. Tried to leave it to charge for a full night but still shows the "out of battery logo" with the red cable.
When plugged to the PC while pressing VOLUME UP + VOLUME DOWN I keep getting the windows sound of device plugged/unpluged, etc etc...
To be honest I think the flashing messed up the partitions as it is now hard to do anything with this device...
Click to expand...
Click to collapse
I can fix it bro pm me telegram .. @Hunar71
Hunar999 said:
I can fix it bro pm me telegram .. @Hunar71
Click to expand...
Click to collapse
Can you help me too, I have exactly the same problem…
If you use Windows, you need to see "QDLOADER 9008" in Device Manager > Portable Devices.
When you got this it will work, 100% .
It worked for me a few days ago. My laptop runs on Windows 11 x64. And only have usb 3.0. NO usb 2.0.
was having the hardest time as well, it's not that the device wasn't going to EDL mode, it was but it had the wrong driver installed, thus making MSM tool not detect it in time, it is a very small window that you have where the device goes into EDL mode and the MSM tool detects it, makes a handshake with it and starts the process, but if you have the wrong driver, MSM tool will not detect the device and the device will just turn back into fastboot mode, I'm attaching a picture of the device manager where the said driver is under "Ports" ( COM & LTP ) make sure you download the above mentioned drivers, if there is any other driver under Ports, uninstall it and whenever you plug in your phone with the VOL + VOL - combo, you will see the device appear under PORTS, upgrade the currently installed driver for the one called qcmdm.inf which you'll find after you extract the .cab file that you downloaded previously, after that open MSM Tool and hit start, the port number should match the one on the device manager, now unplug the cable from your phone, power it off and do the button combination and then plug in the cable, MSM should instantly recognize the device and start the restoration.
Alberhasky said:
was having the hardest time as well, it's not that the device wasn't going to EDL mode, it was but it had the wrong driver installed, thus making MSM tool not detect it in time, it is a very small window that you have where the device goes into EDL mode and the MSM tool detects it, makes a handshake with it and starts the process, but if you have the wrong driver, MSM tool will not detect the device and the device will just turn back into fastboot mode, I'm attaching a picture of the device manager where the said driver is under "Ports" ( COM & LTP ) make sure you download the above mentioned drivers, if there is any other driver under Ports, uninstall it and whenever you plug in your phone with the VOL + VOL - combo, you will see the device appear under PORTS, upgrade the currently installed driver for the one called qcmdm.inf which you'll find after you extract the .cab file that you downloaded previously, after that open MSM Tool and hit start, the port number should match the one on the device manager, now unplug the cable from your phone, power it off and do the button combination and then plug in the cable, MSM should instantly recognize the device and start the restoration.
Click to expand...
Click to collapse
Yeah make sure it's exactly the same name of that driver - worked for me on oneplus 9
If you have access to fastboot still. Try switching slots. Then going into EDL
For anyone looking for help, please DM me.
djsubterrain said:
1] Make sure you have it connected directly to your computer via USB port rather than via a USB Hub, I've seen that cause the device not to show up in the device manager.
2] You might have to restart your computer with driver signing disabled, check here for instructions for that
3] I've uploaded the Qualcomm drivers here
4] Make sure you use POWER + VOL DOWN + VOL UP and watch your device manager to see if the device is there
5] Make sure you choose the correct MSM tool from here for your region/provider
6] Remember to use MsmDownloadTool V4.0.exe, choose "User type : Others" and choose the correct device/region under the top "Target" dropdown.
7] If you don't see any COM device showing connected then try changing USB port or rebooting the device back into EDL mode.
Click to expand...
Click to collapse
Thanks a lot man. Saved my Day. First 9Pro successfully restored ;-) Thank you and merry Christmas to all.
Guys I do not need to use the MSM Tool Anywhere until I reach the step where my device is being successfully detected as "QDLOADER 9008" in my windows device manager correct?
Or does the MSM Application need to be running when I reboot to EDL mode?
I am following this guide.
Please help
I always have phone powered off, and while holding both volume keys I plug it into USB cord(that is already plugged to pc) and then click on enum(button in msm screen) until it says connected then hurry and click start. Once it starts I can let go of volume keys.. Also more than likely u will need to click the box to "use lite firehose" or "Sahara communicaion" will keep failing.
make sure you have oneplus 9 pro drivers and " qaulcomm incorporated - Ports" Driver) and ("qaulcomm communications inc-Net" Driver) so your phone in edl which will be already most likely be running before you plug it in. just hold down both volume buttons and plug in to the usb port to your pc and release once plugged in and start the msm tool and hit enum it should say connect provided that you have all the necessary drivers above so the pc usb port will be able to communicate/recognize you device. its never usually A 1 and done type of thing. everytime i brick my phone its always the 100th try before i get a com port connected and the software communicating successfully, so just be patient and take your time. you will get it back up and running,
Hey, I wanted to ask in here instead of starting a new thread.
Right now I have an OP9p that wont boot to EDL (Only fastboot or Corrupt page)
I tried the fastboot commands but it won't work and it won't shut down, I have fixed multiple phones using MSM and know all the small issues and how to get around them but it's the first time finding a device that won't shut down and will keep rebooting tried volume up + Power for several seconds tried holding only power or the three.
Nothing it keeps rebooting and won't shut down for me to get into EDL.
Any ideas?
Thanks
awsan said:
Hey, I wanted to ask in here instead of starting a new thread.
Right now I have an OP9p that wont boot to EDL (Only fastboot or Corrupt page)
I tried the fastboot commands but it won't work and it won't shut down, I have fixed multiple phones using MSM and know all the small issues and how to get around them but it's the first time finding a device that won't shut down and will keep rebooting tried volume up + Power for several seconds tried holding only power or the three.
Nothing it keeps rebooting and won't shut down for me to get into EDL.
Any ideas?
Thanks
Click to expand...
Click to collapse
can't get into edl mode
how can I get oneplus 9 pro into edl mode while it's refusing to turn off? keep in mind that I can't use adb. but was able get fastboot devices command to work and I did not use any third party roms, didn't unlock the bootloader, and do not have...
forum.xda-developers.com
awsan said:
Hey, I wanted to ask in here instead of starting a new thread.
Right now I have an OP9p that wont boot to EDL (Only fastboot or Corrupt page)
I tried the fastboot commands but it won't work and it won't shut down, I have fixed multiple phones using MSM and know all the small issues and how to get around them but it's the first time finding a device that won't shut down and will keep rebooting tried volume up + Power for several seconds tried holding only power or the three.
Nothing it keeps rebooting and won't shut down for me to get into EDL.
Any ideas?
Thanks
Click to expand...
Click to collapse
Well you have a corrupted boot.img or you would not be trying to edl. Also you probably are holding down multiple buttons to power off to your phone and your either not remembering or forgot that these combination of buttons are booting you into other modes fastboot, recovery or system.