Develop Bugs

OUYA bricked, got into recovery.

Ok long story short, the other day I was doing the steps to get adb wireless working and I accidentally skipped the step after I chmod build.prop where you pull the build.prop and everything went downhill from there, leaving me with a blackscreen when I turn on my OUYA. I just did the alt + sysrq + i combo a bunch of times and got into CWM. I was going to do a backup the other day after getting adb wireless but didn't make it that far so I can't restore a backup, so I'm thinking I have two options. Factory reset, OR I can use the Install zip from sideload to flash the latest OTA. I'm thinking the later of the two would be the step to go, can anyone provide any advice on this? Thanks so much.

good times...
I had the same issue last friday. Black screen, and Ouya was seen as an MTP USB device on laptop. had to reinstall all drivers and such... had an issue when in recovery that changed the driver code this helped...
http://forum.xda-developers.com/showthread.php?t=2352658
I went the route of sideloading the OTA got file from here...
http://forum.xda-developers.com/showthread.php?t=2266629
also this helped..
http://forum.xda-developers.com/showthread.php?t=2344097

This issue has been resolved. I simply selected Install zip from sideload and cd'd to the directory where my current OUYA version's OTA was downloaded and did adb sideload OUYA-1.0.298-r1_ota.zip, rebooted and it worked. The first time I did a factory reset after the sideload due to a recommendation and it didn't work, so I had to do it again. It worked the second time around when I didn't perform the Factory reset.

Hello, I seemed to broke my ouya... I (stupidelly) formated my SD card in recovery... now I can't even get the ouya to be recognized in Windows... I tried sideloading OTA and it says that there aren't any devices connected... I should have just be happy with root access and SU and BusyBox, but no... I wanted to try some custom roms, now I bricked it... FML

Il_Padrino said:
Hello, I seemed to broke my ouya... I (stupidelly) formated my SD card in recovery... now I can't even get the ouya to be recognized in Windows... I tried sideloading OTA and it says that there aren't any devices connected... I should have just be happy with root access and SU and BusyBox, but no... I wanted to try some custom roms, now I bricked it... FML
Click to expand...
Click to collapse
Have you tried the all-in-one tools box that is posted in this forum? It may help in getting your ouya back up assuming you can get into recovery. Although if there is no OS on the ouya, you would not be able to get the init.d process to crash either. What guide did you follow that says to format the SDcard?

mikeones42 said:
Have you tried the all-in-one tools box that is posted in this forum? It may help in getting your ouya back up assuming you can get into recovery. Although if there is no OS on the ouya, you would not be able to get the init.d process to crash either. What guide did you follow that says to format the SDcard?
Click to expand...
Click to collapse
I tought it was like the phones... (stupid, stupid, stupid)
I have recovery, I was wondering if there is a way to install OTA or Custom Roms over OTG...

[Q] Help! - Rooted Zenfone 2 (ZE551ML) bricked after OTA accidently

followed a tutorial (Cnncted's youtube clip - How to root the ASUS ZenFone 2 ) to root
Accidentally (very stupid) pressed the update option when an OTA update showed up yesterday (Jul 8 2015), and after that the phone won't start properly - stopped at in search of incredible...
No luck with trying to boot into recovery mode (power + volume up). It just vibrates once and the screen is black. Trying to flash recovery image with ADB and flashtool etc, but the MTP usb connection failed. If I connect it to the PC using the USB cable and then press the power button to turn it on (stuck in that ..."incredible" screen), device manager shows the Z200AD name with a yellow exclamation mark beside, and Asus ZenUI software will automatically start. But it's not really recognized by the PC.
So...if you have any suggestions for me to try, please let me know and that would be greatly appreciated!
Harry
p.s. This is a US version, so the it's the WW sku?

Same problem here. I have a rooted 551ML and on July 6th I received an OTA update. I installed it and I'm stuck in boot loop. I have hundreds of family pictures in the internal memory.
The good news is that I have access to boot loader and recovery.
I could not find any custom recovery for Zenfone 2. They are not out yet, right? Is there any way to copy the internal memory of the phone (that doesnt load the OS) to the SD card? Or to paste a file img.boot taken from a downloaded official rom and copy it over the corrupted one on the phone's memory?

If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.

joel.maxuel said:
If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.
Click to expand...
Click to collapse
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...

I faced this problem too. All I did was to flash the boot.img of my version using fastboot,
Then I flashed the firmware, without factory reset I started the phone.
I was continiously getting an error "com.android.process has stopped". Ignoring that, I just backed up my whole data. Did a factory reset. Updated
Boom!! Everything was normal... I hope this helps

Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
xxmmx said:
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...
Click to expand...
Click to collapse

xxmmx said:
Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
Click to expand...
Click to collapse
Isn't everyone serial number the same? mine is.

This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
GGL-Daz said:
Isn't everyone serial number the same? mine is.
Click to expand...
Click to collapse

xxmmx said:
This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
Click to expand...
Click to collapse
Pretty sure rooting didn't affect my fastboot screen at all.

actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.

dip_anker said:
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.
Click to expand...
Click to collapse
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.

5ifty1 said:
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.
Click to expand...
Click to collapse
i tried it with prerooted as well as the stock rom, it did not work for me. isn't there any way to flash CM12.1 using the fastboot ?

TWRP BOOT LOOP has anyone found a solution (OTA update)

i tried installing the lastest ota update while i had twrp installed, i have tried everything to get out of this loop.
tried flashing the updated rom off the oneplus website and if gave me errors
just looked at my phone and now it wont turn on what so every getting really stressed please help
[SOLVED]
went back to stock recovery and side loaded the full 1.4 gb rom i will leave a link for tutorial that i used, i wanted to get back to complete stock and this was the one use
"https://forums.oneplus.net/threads/guide-how-to-unroot-your-oneplus-3-and-go-back-completely-to-stock.456232/"

When you have TWRP you have to install full zip, not simply the eval OTA zip

bob_cheeseman5 said:
i tried installing the lastest ota update while i had twrp installed, i have tried everything to get out of this loop.
tried flashing the updated rom off the oneplus website and if gave me errors
just looked at my phone and now it wont turn on what so every getting really stressed please help
Click to expand...
Click to collapse
Flash the stock recovery.
Get stock recovery from downloads.oneplus.net

I cant seem to flash the stock recovery. The device is not visible in adb devices or fastboot devices. im facing the same issue.

If you are using TWRP 3.0.4-0 - try a hard boot...hold down the power button for 20s...wait 20s, power it back on.

bob_cheeseman5 said:
i tried installing the lastest ota update while i had twrp installed, i have tried everything to get out of this loop.
tried flashing the updated rom off the oneplus website and if gave me errors
just looked at my phone and now it wont turn on what so every getting really stressed please help
Click to expand...
Click to collapse
easy solution. Boot into fastboot
download this tool.
https://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
if newest version isnt working, download an older version with older twrp
than unzip the tool and run the .bat file and install twrp.
Thats it

There are many posts on Nougat not working with official TWRP (based on 6.0 build). Try booting into stock recovery. performing a system settings reset, then booting into fastboot and run the adb command, <fastboot boot TWRP-3.0.2-1.28.img>. From there you can do virtually anything you need to do. I recommend at least using a modified version of TWRP (such as 1.28). This has been posted many times before, please try and do a search for the answers first, it will help tremendously. Thanks

recovery
i had the same problem on my rooted OP3 when i used TWRP 3.0.2-1 , it worked to flash the full 4.0.1 rom but failed for everything else, flashing latest verion of twrp fixed it for me

Got the same problem (unrooted phone + device state locked, cannot access recover, but can access fastboot) with an added "benefit", USB debugging mode was off before it all went crashing and burning.
How to access my phone via PC? (all the guides I've found assume I had USB debugging mode on before the phone got soft-bricked, but as a normal phone user who never installed anything custom, I've never figured it is A MUST BE ON function).
Or simpler question - what tool to use to turn on the USB debugging mode? (if that is at all possible?)

Aislandas said:
Got the same problem (unrooted phone + device state locked, cannot access recover, but can access fastboot) with an added "benefit", USB debugging mode was off before it all went crashing and burning.
How to access my phone via PC? (all the guides I've found assume I had USB debugging mode on before the phone got soft-bricked, but as a normal phone user who never installed anything custom, I've never figured it is A MUST BE ON function).
Or simpler question - what tool to use to turn on the USB debugging mode? (if that is at all possible?)
Click to expand...
Click to collapse
I have tried doing the installing of the newer twrp but cant find a newer version of it, i am on 3.0.2-1. i have the same problem as you that my USB debugging isnt on i dont think so when trying to use the op3 tool kit i can get it to pick up fast boot but nothing else.
have you found a solution to your problem yet?

bob_cheeseman5 said:
I have tried doing the installing of the newer twrp but cant find a newer version of it, i am on 3.0.2-1. i have the same problem as you that my USB debugging isnt on i dont think so when trying to use the op3 tool kit i can get it to pick up fast boot but nothing else.
have you found a solution to your problem yet?
Click to expand...
Click to collapse
Noted that you solved your issue, but this post is about the new version of TWRP. Version 3.0.3 is available on twrp.me and it works with Nougat.

bob_cheeseman5 said:
I have tried doing the installing of the newer twrp but cant find a newer version of it, i am on 3.0.2-1. i have the same problem as you that my USB debugging isnt on i dont think so when trying to use the op3 tool kit i can get it to pick up fast boot but nothing else.
have you found a solution to your problem yet?
Click to expand...
Click to collapse
Gave up trying and booked a session with OP technicians Will see how it goes in a week.

TWRP recovery not working on Blackview BV9500

Hi everybody,
I try to root my Blackview BV9500 by installing first TWRP recovery. I use fastboot mode on a linux laptop to do that.
I successfully flash the twrp recovery image, but after that, the phone don't boot in recovery anymore.
It try to boot into recovery, but it reboot in normal mode a few second after.
I tried also with the cmd "fastboot boot recovery.img".
When i flash back the original recovery image, it work, i can boot the original recovery without any problem.
Does anyone have the problem?
Some one can help me to find a solution?

I, too, am trying to do this. I have not yet flashed it... I was going to use the fastboot boot command to boot the recovery kernel before permanently flashing it, to make sure it would work, and in my googling I stumbled across this post. Serendipity! [Edit 3: Although, reading your post again, I see you tried that as well and it didn't succeed for you. For me, it simply tells me remote: command not found, so how were you able to even get that to work?]
All that said... I have the BV9500 Pro, specifically for the two-way radio, so I'm going to try to keep that little tidbit of hardware working in the process. I mainly just want to tweak the menus a bit, tweak the quick settings, get root, delete the Google crapps I won't be using...
On to your problem, though, I can't help much but maybe if we post back and forth our successes and failures we might be able to stumble through it together?
First, I assume you already have unlocked your bootloader? [Edit: Honestly, I'm not sure flashing the recovery would be allowed without first unlocking the bootloader]
[Edit 2: Perhaps this thread might be of help. Different model, but often the hardwares used by manufacturers are similar enough that the same steps generally work. ]

Thank you for the link, maybe i need to flash the complete rom with the twrp recovery with spflash tools, and it will work.
I will try and let you know, but i will make a backup of my rom before flashing it!
For your problem with fastboot, maybee it's because you need to install it. You can use the command "sudo apt-get install fastboot" on a terminal window if you are on linux.
If you want to enter the recovery mode, you don't need to use fastboot, you can simply enter it by pressing Volume Up and Power buttons together for a couple of seconds when your phone is off.
When Boot Mode appears release all keys.
To flash recovery with fastboot, you need first to enable the developer mode on your phone (go to "Settings > About phone" and make 7th tap on the build number, the Developer options will be unlocked and available), and unlock the bootloader of course.
here what is the process i made to flash the recovery :
- i use the command "adb devices" to check if the phone is well connected. (response is like "BV9500S320001179 device")
- then i enter in fastboot mode with "adb reboot bootloader" (phone reboot and ask confirmation for fastboot mode)
- check with command "fastboot devices"
- unlock the bootloader with the command "fastboot oem unlock" or "fastboot flashing unlock".
- flash the phone with the twrp recovery with "fastboot flash recovery recovery.img"
- reboot the phone in recovery mode with "fastboot boot recovery.img"
Normally the phone boot in twrp recovery.
Hope that will help you too.

I am too facing this problem. In case you got any solutions please let me know too.

Yves596 said:
For your problem with fastboot, maybee it's because you need to install it. You can use the command "sudo apt-get install fastboot" on a terminal window if you are on linux.
Click to expand...
Click to collapse
Yup. Already had fastboot installed for the LG G5 this phone replaced, the Galaxy Note 4 the LG replaced, the MyTouch 4G Slide the Galaxy replaced, my wife's old Galaxy S5 I used in the interims... LOL, I've got a working install. No, the "Remote: command not found" was returned from within.... Whether fastboot or adb, I forget now, but I was able to get the file to flash eventually, after reading your first post, but unfortunately the phone would not boot to it (nor Android). I thought I'd bricked it. Twice this happened. Each time, after about 5 minutes, it eventually booted to Android.
I flashed the recovery from the ROM in the link Blackview sent me and was able to boot their recovery just fine, so there's something in the TWRP that my particular phone doesn't like.
If you want to enter the recovery mode, you don't need to use fastboot, you can simply enter it by pressing Volume Up and Power buttons together for a couple of seconds when your phone is off.
When Boot Mode appears release all keys.
Click to expand...
Click to collapse
Thanks, I keep forgetting which keys to hold for recovery versus bootloader, so I use the adb command to be sure without having to keep a notepad nearby.
Clearly I don't do this as often as I used to.
(snip)
- flash the phone with the twrp recovery with "fastboot flash recovery recovery.img"
- reboot the phone in recovery mode with "fastboot boot recovery.img"
Normally the phone boot in twrp recovery.
Hope that will help you too.
Click to expand...
Click to collapse
Now that was something I haven't done since the T-Mobile G1 days. My understanding was that you CAN boot a recovery without flashing it first if you"fastboot boot {image filename}" but that didn't work for me either. I'm also assuming that the filename to flash can be anything because the device stores it to a partition, so it shouldn't have to be specifically "recovery-verified.img".
The recovery you have... Were you ever able to boot to it? If so, would you be willing to share a link to its download source, please?
I've got to run for a prior engagement, I'll check back later.
Thanks!

veronicadavis said:
I am too facing this problem. In case you got any solutions please let me know too.
Click to expand...
Click to collapse
I guess i find the reason why the modified recovery image won't boot.
I find an interesting information in a post of osm0sis (https://forum.xda-developers.com/showthread.php?t=2073775) were he say : "some newer MediaTek (MTK) devices use special image signing that adds a "BFBF" pre-header signature, so images will unpack/repack but most likely won't boot unless run through their internal signing tool."
After more search, i find an interesting publication (http://www.lieberbiber.de/2015/07/04/mediatek-details-partitions-and-preloader/) witch confirm that.
They say in conclusion of the publication :
"Yes, I can confirm that SignTool is able to add digital signature information to firmware images. Signed images have an additional header “BFBF” and some fluff which SP Flash Tool checks on a secure device. Apparently some manufacturers merely used the default MTK key for signing the images, making them no better off than a typical insecure MTK device."
So we have to find another way to install magisk to root it.

Root 9500/pro
Mine rooted already....you guys can check on 4pda russian forum
Note : do not use the 17.1 version of magisk there because after reboot the device will freeze if you resboot after twrp 1st install...instead flash 17.3+ or 18+ right after first install of twrp...
EDIT : dont mind the russian language in TWRP as you can change it to english once there

Yves596 said:
Hi everybody,
I try to root my Blackview BV9500 by installing first TWRP recovery. I use fastboot mode on a linux laptop to do that.
I successfully flash the twrp recovery image, but after that, the phone don't boot in recovery anymore.
It try to boot into recovery, but it reboot in normal mode a few second after.
I tried also with the cmd "fastboot boot recovery.img".
When i flash back the original recovery image, it work, i can boot the original recovery without any problem.
Does anyone have the problem?
Some one can help me to find a solution?
Click to expand...
Click to collapse
Hello I have same problem... Do you have that original recovery file? I don't have and I would like to get that back. Thanks.

DL this:
needrom. com/ download/bv9500pro- bv9500-root/ (delete spaces)
- Copy Magisk-v18.0.zip and disable_encryption_9500.zip to external SD-Card or OTG device
- backup your data from internal SD-Card
- do a factory reset and turn off phone without entering the setup guide after reboot, or wipe via recovery and power off
- Flash recovery.img using scatter.txt with SP Flash Tool
- boot into recovery with hold down vol + and power
- switch TWRP to your language and install Magisk-v18.0.zip and disable_encryption.zip
- reboot and update or install MagiskManager-v6.1.0.apk
Thanks to Jemmini from 4pda.ru

kanadali said:
DL this:
needrom. com/ download/bv9500pro- bv9500-root/ (delete spaces)
- Copy Magisk-v18.0.zip and disable_encryption_9500.zip to external SD-Card or OTG device
- backup your data from internal SD-Card
- do a factory reset and turn off phone without entering the setup guide after reboot, or wipe via recovery and power off
- Flash recovery.img using scatter.txt with SP Flash Tool
- boot into recovery with hold down vol + and power
- switch TWRP to your language and install Magisk-v18.0.zip and disable_encryption.zip
- reboot and update or install MagiskManager-v6.1.0.apk
Thanks to Jemmini from 4pda.ru
Click to expand...
Click to collapse
Thank you for your help and Jemmini help too, it work fine.
But on the firmware version 20180629.

Yves596 said:
Thank you for your help and Jemmini help too, it work fine.
But on the firmware version 20180629.
Click to expand...
Click to collapse
you can just download latest firmware and simply backup NVRAM etc with sp flash tool also flash with sp tool, you will have then working twrp with disabled encryption. there are tons of post regarding using sp flash tool on this forum
im using same phone and did these actions on first day and did not have any problem with twrp or magisk

Hi,
I've bought this phone in Pro version. I rooted my phone using needrom.com/download/bv9500pro-bv9500-root/ and adb after unlocking bootloader. Then I failed with errors. Then I used SPFlashTool in root mode with official 2018092919_s32v63c2k_jk_pro.rar rom (I don't find it anymore on the net but 1) I got it on Blackview official forum and 2) I have the file on my own PC) with format+Download and replace recovery with TWRP from Jemmini from 4pda.ru before flashing. OK.
Then I rooted again: format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally.
Beware: TWRP is in Russian language at first boot, so to get it in English, first slide the first slide (allowing writing), then select 'Настройки', then the globe on top, then English, then 'Установитъ Язык'.
Hope this helps.
Then, this is my first rooted phone, so I plan to make a custom rom without Gapps (then maybe without Mediatek Ones and agold too) and remake all functionning with apps from Fdroid. Help needed on a manner of removing a system/vendor app properly. Help needed too to add V4A, as I could see max version supported is Nougat. I announce this here as my first post, but my project will be a full post. If someone want help please ask here or MP me
Note: an update of magisk is out (official 18.1), I installed it and my phone tells me a message that facial recognition was not working anymore then it only boots on TWRP... I reflashed it and my phone boots normally again. Wait and see...
Thanks to Jemmini from 4pda.ru again.
Bests Regards

nr0000000 said:
Hi,
I've bought this phone in Pro version. I rooted my phone using needrom.com/download/bv9500pro-bv9500-root/ and adb after unlocking bootloader. Then I failed with errors. Then I used SPFlashTool in root mode with official 2018092919_s32v63c2k_jk_pro.rar rom (I don't find it anymore on the net but 1) I got it on Blackview official forum and 2) I have the file on my own PC) with format+Download and replace recovery with TWRP from Jemmini from 4pda.ru before flashing. OK.
Then I rooted again: format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally.
Beware: TWRP is in Russian language at first boot, so to get it in English, first slide the first slide (allowing writing), then select 'Настройки', then the globe on top, then English, then 'Установитъ Язык'.
Hope this helps.
Then, this is my first rooted phone, so I plan to make a custom rom without Gapps (then maybe without Mediatek Ones and agold too) and remake all functionning with apps from Fdroid. Help needed on a manner of removing a system/vendor app properly. Help needed too to add V4A, as I could see max version supported is Nougat. I announce this here as my first post, but my project will be a full post. If someone want help please ask here or MP me
Note: an update of magisk is out (official 18.1), I installed it and my phone tells me a message that facial recognition was not working anymore then it only boots on TWRP... I reflashed it and my phone boots normally again. Wait and see...
Thanks to Jemmini from 4pda.ru again.
Bests Regards
Click to expand...
Click to collapse
It'd be great to have another rom but I'm facing a problem with battery life. Basically mobile network standby drains 5000mah battery every day i turned off from developer option but still problem is there. I have checked every single post on Google but nobody has solution for this. U guys face this problem too?

kanadali said:
It'd be great to have another rom but I'm facing a problem with battery life. Basically mobile network standby drains 5000mah battery every day i turned off from developer option but still problem is there. I have checked every single post on Google but nobody has solution for this. U guys face this problem too?
Click to expand...
Click to collapse
New update has been released today. It solves some battery issues, but be very careful.
I installed it, having TWRP and now I'm stuck in TWRP. I've tried to wipe everything but I'm still in TWRP.
I'll try SPFlashTool ... hope it works.

Everything restored & updated.
Using SPFlashTool I flashed all files included in 2018092919_s32v63c2k_jk_pro.rar (including original recovery instead of TWRP).
After that, Android booted and then, using OTA, I updated to latest version.

Reflected_God said:
New update has been released today. It solves some battery issues, but be very careful.
I installed it, having TWRP and now I'm stuck in TWRP. I've tried to wipe everything but I'm still in TWRP.
I'll try SPFlashTool ... hope it works.
Click to expand...
Click to collapse
Could you please send me the link? Can't find it on blackview forum

kanadali said:
Could you please send me the link? Can't find it on blackview forum
Click to expand...
Click to collapse
The latest version is not on the forum. I installed via OTA.
But if you mean the previous firmware, there is one link on the blackview forum: http://bbs.blackview.hk/viewtopic.php?t=480235#p795494
SP Flash tools are well documented here: https://forum.xda-developers.com/showthread.php?t=1982587
And a complete list of blackview bv9500 / bv9500 pro files and instructions (in russian): https://4pda.ru/forum/index.php?showtopic=931296
Hope you find what you are looking for.

@kanadali,
for the moment I'm not facing battery drain because there is not simcard in it at this state of my modifications, sorry.
@Reflected_God,
I think this is the link I used, I use the 2018092919_s32v63c2k_jk_pro.rar rom for base.
For all others who faces big problems like me (facial recognition not working then reboot on twrp only, I could reflash my phone with SPFlashTool, the rom and twrp from Jemmini/4PDA in russian only (others don't work for me). I used Format + Download in root mode on Linux. Then format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally. Do other things. To remove gapps I disabled/force stop it before remove with TWRP. Others apps I can't disable simply remove with TWRP. I test if I encounter bugs but none for the moment. If someone wants to know what I do I've made a LibreOffice Calc sheet log, which evolve when I have time
Hope this helps
Bests Regards

Need Files or a GOOD guide. bv9500 NOT PRO.
If someone could upload the exact files that they used, and the exact same steps, that would be great. Please mention what stock version you have and a link to the image if possible as well. I've followed numerous different guides, with multiple different rom versions, multiple different recovery imgs, used sp flash tool and adb/fastboot multiple times, tried making sure everything was unlocked before each try, have all the necessary drivers, and the closest I get to a functional twrp recovery is a green line that appears at the top of the boot screen before it reboots. Ive tried going to the source, the russian site, but all of the links are 404ed. if not for me, then it would be great to just have this all in one place. Thank you please future hero.
Please include exact program versions (ex SP Flash) as well if not zips of them. I am sorry to be asking so much in one post however I truly didn't know what else to do. And I am typically very good with my google fu xD
I currently have build number BV_BV9500_V1.0_20181026. That seems to matter I believe.

I second the notion.
I have the pro model. I have considered rooting it, but honestly, the phone works well enough as-is without root (for me). However, I'd LOVE to be able to play with different ROMs on this device **AS LONG AS I CAN MAINTAIN THE TWO-WAY UHF TRANSCEIVER FUNCTIONALITY** (i.e. not some "needs-a-network-of-some-kind" "walkie talkie app" like Zello but the real UHF two-way), and I'd LOVE the ability to play with the files associated with the radio to really explore the hardware's capabilities.
Unfortunately, this phone seems more popular in [North]eastern Asia than anywhere else so I don't think we're likely to get much on this forum regarding it unless and until BV become a popular name in the western hemisphere.

S10e - impossibility to install Lineage OS

I need to install Lineage OS on this phone.
After multiple tries several months apart, I am still not in success.
Followed all internet tutorials and sites.
I don't want to install any G apps or any special root-things like magdisk..
I only want pure Lineage OS without any extra applications.
Way I tried and probably ended up like before:
Get newest official samsung ROM installed, update, enable usb debigging and oem, go download mode and go factory reset, get back in, sign in to wifi again, again enable develop. settings and usb debugging, go into download mode, take odin and install through the AP option the TWRP now that the phone is in download mode a 3rd time, supposed to be possible now with OEM unlock.
Most of the names on the way I don't understand, just follow tutorials.
I need to get to TWRP to then finally, as used to always, install Lineage from zip.
But I never get rebooted into TWRP recovery, just forver the samsung one, even when firmware is no longer there - after flashing in ap option the twrp tar again it never boots into TWRP afterwards.
Is there something else i must do? is not getting into oem unlock and flashing TWRP enough to get there?
And after, will the zip install finaly get me to have lineage installed?

Did you try the official guide?
https://wiki.lineageos.org/devices/beyond0lte/
I hope I picked the right phones, otherwise check devices overview.
Alternatively, perhaps this helps:
https://forum.xda-developers.com/t/...-a-graphical-installer-for-lineageos.4509995/
PS: Usually LOS doesn't do TWRP anymore but comes with its own recovery (a/b)

Why they don't do TWRP now?
I saw TWRP tuorial fot s10 on tutorials and it worked
Do I have to give up on TWRP way and od it with the adb commands from PC

frustrateduser118 said:
Why
Click to expand...
Click to collapse
It's because of this new double recovery scheme:
https://forum.xda-developers.com/t/help-understanding-a-b-partitions.3748003/post-75545902
https://source.android.com/docs/core/ota/ab
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/
EOD: It's safer, updating happens in the background, then just a quick reboot et voila.
frustrateduser118 said:
I saw TWRP tuorial
Click to expand...
Click to collapse
Yes, it's still there but perhaps you post a link to your guide (or ask there). To me it seems you had TWRP just in your RAM but not your phone?
As for me, I finally gave up on TWRP and use the "crappy" LOS recovery Have way more important things to waste my time on...
PS: Sorry to bring such "bad" news, wasn't too happy with that change myself

Great, I finaly made it work.
I followed the site with turotial on installation and did not try TWRP
First I had to install samsung ROM again
It turned out to still stay unlocked so went straight to download mode and this time flashed Lineage recovery sucesfuly with heimdall
Then it booted up and a half samsung sreen made it seem like there is trouble
but Lineage recovery launched
The adb load from PC did not work so i chose to instal zip from SD even there
Now Lineage is installed
Still don't know how much is randomness, luck and so on
But it's done and hopefuly repeatable

frustrateduser118 said:
hopefuly repeatable
Click to expand...
Click to collapse
I am afraid it is
Well, most of times: Far too often I forget some little prerequisite, too... so started a little text file with steps/reminders.

anyway glad for support sigmund
you re my friend now