[Guide][Tutorial] Root TWRP LG G5 using Autorecowvery[H830 & V20A only][Noobfriendly]
This is guide to root and install twrp on lg g5 T-Mobile using recowvery method.
Read 4th post before proceedingThis method is to root & install TWRP on only T-Mobile LG G5 running Nougat 20a software. If your phone isn't on 20a then first downgrade/upgrade to 20a software.
Before asking a question, first, see FAQ in 3rd post. In that way you can save a lot of time.
For Video Guide refer to 5th Post
You need to disable antivirus before extracting files. Because we are using DirtyCow vulnerability here. Which is technically a virus (It's not dangerous for pc but for exploiting android to get root access). If you can't disable AV then don't proceed because process will not work
Download:1: Recowvery (2nd post)
2: Minimal adb (2nd post)
3: TWRP
A: H830 | For H850 (Refer to this Post and read carefully)
[Download TWRP 3.0.2 as 3.1.0 is having some little issues with flashing with autorecowvery] Always download latest TWRP available for your device to avoid most issues.
(rename it to recovery.img)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Procedure:Drivers should be installed. Also install minimal ADB and fastboot.
1: Make sure to unlock bootloader. Backup internal data because it will be erased.
A: First enable developer options and toggle “Enable OEM unlock” to ON. Also enable “USB Debugging”.
B: Run Minimal ADB and Fastboot. Enter Command
Code:
adb devices
C: You will see permission dialogue on phone. Tick “Always allow” and ok.
D: Now enter.
Code:
adb reboot bootloader
E: Now phone be in fastboot mode. Enter
Code:
fastboot oem unlock
F: This will wipe all data on internal storage. Now Enter
Code:
fastboot reboot
G: Now OS will get booted. Bootloader will be unlocked but phone should be in factory reset condition. So again enable “USB Debugging”.
THEN
2: Connect phone with pc in MTP mode and copy recovery.img to phone’s internal storage (Make sure to select MTP as always to avoid problem during procedure). Extract recowvery software. (If it causes permission problems extract it to USB device and perform process from there)
3: Run “EasyRecowvery.cmd”. Press “5” -->Enter then press “7” -->Enter to disable integrity check. Then enter “0” to go back. Skip it if you are using Recowvery G5 modified.
4: Now press “2” and wait until it says warning. Press “y” -->Enter. (It won't say warning in Recowvery G5 modified)
5: It will do rest process. After Flashing TWRP it will flash “no-opt-encrypt” (This is most important to save twrp from being removed by OS)
6: Phone will boot into TWRP. Here on phone it will ask for decrypt code. Cancel it. Swipe to allow modification.
7: On pc press any key, the flashing process on phone will automatically get started. Then it will reboot into OS.
8: To flash supersu, select option 3 from recowvery windows and phone will boot into twrp. Same as step 5-6 it will automatically flash supersu.
Now Your rooted and have twrp install.
Note: For removing Encryption.
To flash a custom rom and remove encryption in twrp, you need to once format data in twrp else you won’t be able to wipe and install any custom rom in your phone.
Attachments
Recowvery G5 modified is fully working, so you can try it.
I'm still keeping easyrecowvery 1.3 in this thread as a backup plan.
Read Read Read Before using This
Test Version --> Ricksy-Recowvery | Mirror
(Ricksy Recowvery is streamlined, checks free version of EasyRecowvery. It has no unlock checks, no model verification so use it only if you're fully sured about what you're doing. It includes but isn't limited to unlocked bootloader, USB Debugging Enabled, Being on V20a firmware, LG Drivers installed, PC allowed as Trusted in USB Debugging as always)
Remember to copy latest TWRP to root of internal storage as recovery.img before proceeding.
Old Test
There is also Addition of Recowvery G5 modified 2.0 Test version as well (This script has some additional features)
(I have also turned off most security checks, so you should have an more easy rooting experience. However, this increase risk of bricking device if you do not read things properly). If you can provide your experience of using this script please share your knowledge.
Download Test version either from here or here or through attachments
FAQ
Recowvery tool is causing permission errors when I run it through computer's internal HDD storage. What shall I do?
Ans: There are possibly 2 workarounds for that.
A: Extract the zip to external USB storage and Run the tool.
B: Change the name of folder, in which recowvery tool is, to "1" and copy to root of storage e.g. "Computer:\D:\1".
Can I re-lock my bootloader after rooting and TWRP flashing?
Ans: No, as recovery partition modified now, this will brick your device.
Can I use V20C or later on my phone after rooting and flashing TWRP?
And: You can't take OTA after rooting as this might create a brick but fortunately @autoprime created TWRP flashable zips of firmwares e.g 20c,20f,20i and he might create newer builds too. Anyways here's the Auto Prime's thread, Go to "LG G5 Files" link and download file as per your variant and choice.
I bricked my phone after following this guide and now I can access only download mode, what shall I do now?
I'm on other version than 20a, What shall I do?
Ans: Really? It seems like you're kidding because this guide can never harm your device, It can either do it's work or not but there is no way for it to brick a device (Unless you don't read carefully).
Ans: You can take your phone back to v20a by using the following guide.
AnywaysYou can always bring your phone back to life by following this Back to Life thread.
How to remove encryption in TWRP? or I'm unable to access my phone's internal storage from TWRP, What shall I do?
Ans: So for this process.
a: Boot into twrp.
(you can boot to TWRP by any app or by vol- and power button combination or from option “5” --> “5” in recowvery toolkit (command window).
b: In TWRP, cancel code Windows, Swipe to allow modification then
Click -->Wipe-->Format Data-->type “yes”-->enter.
You need to do this only once. After that you can flash roms and zips unlimited times.
Will this root method work on 20c/d/e/f or others?
Well, it shouldn't. Because I tried this on 20c and it never worked, so I believe it will not work on any software other than 20a because LG removed that exploit to root after 20a. But you can try your luck and tell me if you succeed.
a: Thanks a lot i have one lg g5 h830 and i have some fear to lose the unlocking and i want to modify the phone.
b: Same i have anyone please answer it will i lost the UNLOCKING (Modified by shopkeeper) if i FLASH another ROM?
What are you people trying to ask here?
Bootloader Unlock:
Bootloader can be locked and unlocked anytime you can to do so just by typing commands in fastboot mode. In T-Mobile G5 the fastboot mode do not accept flash command that's why we can only lock and unlock bootloader.
TWRP:
As commands are limited in fastboot mode of T-Mobile G5, we are unable to flash twrp through fastboot mode. So, for this process we rely vulnerability found in G5 firmware. The only currently found method for doing so is by using dirtycow exploit to flash TWRP on H830. Only V20a contains this vulnerability to do so.
Summary:
So to flash TWRP and enjoy freedom of using custom rom (Which I suppose you refer as Unlock to) you need to be on V20a. Which can be flashed easily through LGUP with Uppercut or use my LG FlashTool method (Link in FAQ section). When on V20a firmware simply use this or your preferred method for flashing TWRP.
If you want to go back to stock, simply flash any stock KDZ and lock bootloader. If you want to get TWRP again, simply unlock bootloader and flash V20a kdz (or flash V20a kdz and unlock bootloader) then instal TWRP by using the process.
Important:
Currently our stock firmwares are running Anti-Rollback (ARB 01), LG can increment this whenever they want, whenever LG increase ARB to 02 or upper then you won't be able to get back to ARB 01 firmwares (e.g V20a ) again. Which means you can unlock bootloader but won't be able to flash TWRP as dirtycow is patched after 20a. So you will lose the ability to flash TWRP which means unlocked bootloader is useless unless someone finds another method of flashing TWRP.
So, if you want to stay unlocked, then make sure to install TWRP as described above and flash latest TWRP flashable stock base zips or use other roms like Fulmics or AOSP based. It's very simple and easy .
First of All:
After Flashing let me know about your experience by answering the poll, this will help me in updating this post.
POLL is ended, so let me know about your experience with toolkit and thread readability in comments.
Disclaimer:
Before proceeding, remember I’m not responsible for anything bad happened to your device by following this or any of my guide. I’m just trying to help. So always do it on your own risk…
Don’t blame me or Any other developer.
All tools here are developed by different personalities. I’m just providing a guide on using these tool. Always say thanks to me and them. And If possible, donate them. They really deserve it.
Thanks be to:
@jcadduono For Recowvery tool
Source thread [V20 originated]
Due to some issue YouTube video aren't being played directly on XDA. So, you need to watch it here (Maybe some resistance on XDA side because things are good on my blog)
https://www.youtube.com/watch?v=F5PdTW8QHcA&t
Video Tutorial:
<iframe allowfullscreen="" frameborder="0" height="270" src="https://www.youtube.com/embed/F5PdTW8QHcA" width="480"></iframe>
https://youtu.be/G_4ayiZbSkM<br />
<br />
<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe width="320" height="266" class="YOUTUBE-iframe-video" data-thumbnail-src="https://i.ytimg.com/vi/G_4ayiZbSkM/0.jpg" src="https://www.youtube.com/embed/G_4ayiZbSkM?feature=player_embedded" frameborder="0" allowfullscreen></iframe></div>
<br />
[YOUTUBE]<object width="445" height="364"><param name="movie"
value="http://www.youtube.com/v/AK9aZyJJNIo&hl=en_US&fs=1&rel=0&color1=0x234900&color2=0x4e9e00&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/AK9aZyJJNIo&hl=en_US&fs=1&rel=0&color1=0x234900&color2=0x4e9e00&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>[/YOUTUBE]
For which software version is this applicable?
arjunking said:
For which software version is this applicable?
Click to expand...
Click to collapse
Nougat v20a only as the thread title says.
I had to extract to a USB device to get recowvery to work but it went smoothly from there, until I got to TWRP to flash the no verity zip. It hung on hit any key to continue, it didn't dawn on me till later I should have mounted USB storage (derp), but I already had the no verity zip and SuperSU on my external SD so I just flashed them manually, booted, and had root. Then I formatted data, lost root, and flashed SuperSU again to get it back. I later flashed @autoprime 20c zip with SuperSU and now I'm rooted with TWRP on 20c, tyvm for the tutorial
Char_G said:
I had to extract to a USB device to get recowvery to work but it went smoothly from there, until I got to TWRP to flash the no verity zip. It hung on hit any key to continue, it didn't dawn on me till later I should have mounted USB storage (derp), but I already had the no verity zip and SuperSU on my external SD so I just flashed them manually, booted, and had root. Then I formatted data, lost root, and flashed SuperSU again to get it back. I later flashed @autoprime 20c zip with SuperSU and now I'm rooted with TWRP on 20c, tyvm for the tutorial
Click to expand...
Click to collapse
First of all you welcome, 2nd thanks for writing about your experience.
I am not completely assured but to make recowvery work in internal hard drive you need to change the name of recowvery folder to "1". Next time whenever you root try this method and let me know wether it worked...
And as you mentioned about having difficulty in flashing no verity. I think this issue is happening only on TWRP 3.1.0, on TWRP 3.0.1 it works fine, i think .
Does this method work with the latest update to 20f? Can I just try it without bricking my phone?
Sent from my LG-H830 using Tapatalk
dksoni411 said:
First of all you welcome, 2nd thanks for writing about your experience.
I am not completely assured but to make recowvery work in internal hard drive you need to change the name of recowvery folder to "1". Next time whenevee you root try this method and let me know wether it worked...
And as you mentioned about having difficulty in flashing no verity. I think this issue is happening only on TWRP 3.1.0, on TWRP 3.0.1 it works fine, i think .
Click to expand...
Click to collapse
Thanks, I'll try that next time. I did use TWRP 3.0.1 though, but I'm thinking that without mounting USB storage, perhaps the verity zip couldn't be found to be flashed.
This worked perfectly!! Thank you so much again! I had to extract the recowvery to a usb stick and run it from there (it wouldn't run properly from the computer hd) and at first I got an error as I had put the recovery.img on the external phone sd. My bad. Anyway... I just copied it over to the phone sd and started over, and it worked exactly as explained in the OP.
AWESOME effort by everyone involved. XDA rules!
Btw... can I relock the bootloader now? And one more thing... I turned off "automatic system updates" in developer mode. I assume if I update to v20c or newer I will lose root? And I guess I should not update the supersu either?
Thanks again! You rock!!
d3th.m0nk3y said:
This worked perfectly!! Thank you so much again! I had to extract the recowvery to a usb stick and run it from there (it wouldn't run properly from the computer hd) and at first I got an error as I had put the recovery.img on the external phone sd. My bad. Anyway... I just copied it over to the phone sd and started over, and it worked exactly as explained in the OP.
AWESOME effort by everyone involved. XDA rules!
Btw... can I relock the bootloader now? And one more thing... I turned off "automatic system updates" in developer mode. I assume if I update to v20c or newer I will lose root? And I guess I should not update the supersu either?
Thanks again! You rock!!
Click to expand...
Click to collapse
As you installed TWRP, so recovery partition is modified which means if you relock bootloader, you will brick your device.
Also if you want to use V20c check @autoprime's thread for the TWRP flashable zip of V20c or later (if there any).
And if you want to update supersu you can do it either by newest supersu zip to flash it through TWRP or by updating it through playstore then update binary through supersu it self, but I think updating supersu mostly changes nothing.
dksoni411 said:
As you installed TWRP, so recovery partition is modified which means if you relock bootloader, you will brick your device.
Also if you want to use V20c check @autoprime's thread for the TWRP flashable zip of V20c or later (if there any).
And if you want to update supersu you can do it either by newest supersu zip to flash it through TWRP or by updating it through playstore then update binary through supersu it self, but I think updating supersu mostly changes nothing.
Click to expand...
Click to collapse
Ok. Thanks for all the info. I think I will keep the v20a with the current supersu. It works perfectly! Hopefully it will not "automatically update between 23:00 and 04:00" as it says in "about phone/update center/system updates". From what I understand, it shouldn't as long as I have the "automatic system updates" set to OFF in developer options.
How can I boot into TWRP? When I reboot and try to enter TWRP I always end up in the hard reset menu where it asks if I want to wipe the phone... Do I have to boot into TWRP through ADB fastboot?
d3th.m0nk3y said:
Ok. Thanks for all the info. I think I will keep the v20a with the current supersu. It works perfectly! Hopefully it will not "automatically update between 23:00 and 04:00" as it says in "about phone/update center/system updates". From what I understand, it shouldn't as long as I have the "automatic system updates" set to OFF in developer options.
How can I boot into TWRP? When I reboot and try to enter TWRP I always end up in the hard reset menu where it asks if I want to wipe the phone... Do I have to boot into TWRP through ADB fastboot?
Click to expand...
Click to collapse
When you boot to recovery through hardware key combination, say yes through hardware keys twice (as you want to reset), it will take you to TWRP, thats the logic from lg g2
dksoni411 said:
When you boot to recovery through hardware key combination, say yes through hardware keys twice (as you want to reset), it will take you to TWRP, thats the logic from lg g2
Click to expand...
Click to collapse
He is absolutely correct. That's exactly what I did on my H830 yesterday.
Keep up the great work people......
Got it after a few attempts
Thanks for the step by step. It is a good walkthrough for a tough device. With all the previous complicated, and sometimes confusing/conflicting, instructions in other (older) threads for the H830 I was nervous to try.
I struggled a little getting it to work; 1) .cmd returned "don't have permission to create log or backup files..." when running from my "documents" directory, had to run it in a root folder. 2) I got the wrong TWRP version at first and the process said success, but never made it to TWRP.
It was the most challenging of any device I have owned to get root, but happy to crack it. Thanks!
root 20f?
does this root method work on 20f?
hp786 said:
does this root method work on 20f?
Click to expand...
Click to collapse
Well, it shouldn't. Because I tried this on 20c and it never worked, so I believe it will not work on any software other than 20a. But you can try your luck and tell me if you succeed.
Salam bro,I followed your method and rooted the phone,after rooting I wiped system, data and cache so I could flash fulmics 2(based on v20c) which I had already downloaded,it flashed successfully but after booting on startup screen there's this popup error"settings keep closing " because of which I can't do anything so can u please tell me where did I go wrong,should I have wiped the system or not?
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
[/CENTER]
Credits:
- TWRP Team
Device: Lenovo Tab3 7 Tablet - TB3-730X
Do not flash this on TB3-730F. The F model has different chipset and this recovery will softbrick it.
@sun_dream reported that 730F is working. So you can probably flash it, but be prepared with OFW, in case something goes wrong.
Instructions:
IMPORTANT: read all instructions at least once, before starting.
Note: If you're are a newbie, you can read more detailed instructions by honzazkrumlova here
- Download from link below.
- Enable "USB debugging" from developer options.
- Enable "OEM Unlocking" from developer options.
- Reboot device in Fastboot Mode (Bootloader mode), either with "adb reboot bootloader" or with VolDown+Power, to enter Recovery mode and then select "Reboot into bootloader"
- Unlock the bootloader with "fastboot flashing unlock" or "fastboot oem unlock" and follow the instructions on the tablet. (WARNING: This will erase all your data - Factory Reset)
- Once unlocked, you can use "fastboot boot TWRP_3.0.2_Lenovo_TB3-730X_Android-6.0_recovery.img" to start TWRP.
- When TWRP ask to modify system partition, answer "NO". Otherwise you will soft-brick your device and you will have to flash the original firmware and start from the beginning.
- If you want root - flash SuperSU, or as the user @Kellicros reported, you can flash Magisk 11.1.
- If you want XPosed, get it here.
- If you want to permanently flash the recovery, use "fastboot flash recovery TWRP_3.0.2_Lenovo_TB3-730X_Android-6.0_recovery.img".
- If you use it on any other Lenovo Tab3 7 device, please post the model.
- Thanks is always welcome.
Downloads:
TWRP_3.0.2_Lenovo_TB3-730X_Android-6.0_recovery.zip (well tested, consider it stable)
TWRP_3.1.1_Lenovo_TB3-730X_Android-6.0_recovery.zip
Unbrick your device:
Follow this thread
Hello
I have the same tablet (TB3-730X) and I tried this recovery, but something I did wrong.
Recovery by my works without problems, but now I can no longer boot into the system, I probably deleted it ...
After restarting the tablet always I return to Recovery and you can not flash the firmware because they can not find a version of the 730X (MTK MT8735P)
Can I use the firmware version for TB3-710 or 730F (MTK MT8161P)
Thanks for any advice, and thanks for Recovery.)
beldy said:
Hello
I have the same tablet (TB3-730X) and I tried this recovery, but something I did wrong.
Recovery by my works without problems, but now I can no longer boot into the system, I probably deleted it ...
After restarting the tablet always I return to Recovery and you can not flash the firmware because they can not find a version of the 730X (MTK MT8735P)
Can I use the firmware version for TB3-710 or 730F (MTK MT8161P)
Thanks for any advice, and thanks for Recovery.)
Click to expand...
Click to collapse
Hi.
When TWRP is started for the first time, it asks to modify the system partition.
I answered NO, NEVER. I saw some posts about other MTK devices and other people seems to have problems like yours when TWRP modify the system partition.
Is this your case?
If yes, then you need to download the original firmware and flash it on the device. After that you need to flash the recovery again.
I've downloaded the original firmware from Russian forum (this post: http://4pda.ru/forum/index.php?showtopic=731493&st=20#entry52434543). Here is direct link: https://cloud.mail.ru/public/Fjd9/u7e8mUbhq )
This is the last TB3-730X firmware. Do not try 710 firmwares, they should not work and it is probably dangerous to flash it. I dont know for 730F, this one could work, but anyway, download the the 730X firmware from the link above.
I guess you will need the SPFlash Tool to flash the firmware.
Hope this helps.
Thank you for the link ...
so probably it is my case that TWRP modify the system partition ... try this firmware and send the result ..
Thanks again for your help, I appreciate it.
I can confirm that Tab3 730x is checking if even TWRP is running (fastboot boot twrp.bin) and delete/modify system partition. TWRP not ask for modify system partition after first boot. Tablet stay on Lenovo logo forever. My firmware version is TB3-730X_S030_160509_ROW. Also in my model is not possible to read/write flash by FlashTool. I always get error 0x7D4, no matter what version I use, even after unlock bootloader. I have also try descibed firmware TB3-730X_S033_160707_ROW but this one cannot be flashed in fastboot mode. It says wrong binary (all files have in name _signed so probably different structure). It's seems that Polish Tab3 tb3-730X tablets are better protected than Russian.
0xAF can You post link to FlashTool what you used to flash your tablet?
[EDIT]
This time i get it working 0xAF are you mean first screen when TWRP start and there is swipe button? I Always swipe and this killed system partition I think. Btw do you both can flash this tablet with FlashTool?
DonKapselo said:
I can confirm that Tab3 730x is checking if even TWRP is running (fastboot boot twrp.bin) and delete/modify system partition. TWRP not ask for modify system partition after first boot. Tablet stay on Lenovo logo forever. My firmware version is TB3-730X_S030_160509_ROW. Also in my model is not possible to read/write flash by FlashTool. I always get error 0x7D4, no matter what version I use, even after unlock bootloader. I have also try descibed firmware TB3-730X_S033_160707_ROW but this one cannot be flashed in fastboot mode. It says wrong binary (all files have in name _signed so probably different structure). It's seems that Polish Tab3 tb3-730X tablets are better protected than Russian.
0xAF can You post link to FlashTool what you used to flash your tablet?
[EDIT]
This time i get it working 0xAF are you mean first screen when TWRP start and there is swipe button? I Always swipe and this killed system partition I think. Btw do you both can flash this tablet with FlashTool?
Click to expand...
Click to collapse
When you start the TWRP for the first time, it will ask to do something on system partition. I cannot remember if it was "Yes/No" answer, or a swipe. Just don't let TWRP touch the system partition.
After unlocking the bootloader with fastboot, you can flash the recovery with fastboot if you want, but first try to boot it, as described in the first post.
If you're going to flash the original firmware from the links above, then you will need SPFlash Tool, because the images (dumps) are made with SPFlash Tool and you cannot directly flash them with fastboot.
For bootloader unlocking, you can try this command: "fastboot oem unlock", while you're in the bootloader.
Did you enabled the "OEM Unlocking" from the "Developer Options" menu?
On my device, I was able to unlock it (after enabling "OEM Unlocking" option) with "fastboot flashing unlock".
"I have also try descibed firmware TB3-730X_S033_160707_ROW but this one cannot be flashed in fastboot mode. "
not to flash, always ends with an error 0x7D4 .....
beldy said:
"I have also try descibed firmware TB3-730X_S033_160707_ROW but this one cannot be flashed in fastboot mode. "
not to flash, always ends with an error 0x7D4 .....
Click to expand...
Click to collapse
Is your bootloader unlocked?
see the "fastboot" command manual, to check if it is unlocked.
0xAF said:
When you start the TWRP for the first time, it will ask to do something on system partition. I cannot remember if it was "Yes/No" answer, or a swipe. Just don't let TWRP touch the system partition.
After unlocking the bootloader with fastboot, you can flash the recovery with fastboot if you want, but first try to boot it, as described in the first post.
If you're going to flash the original firmware from the links above, then you will need SPFlash Tool, because the images (dumps) are made with SPFlash Tool and you cannot directly flash them with fastboot.
For bootloader unlocking, you can try this command: "fastboot oem unlock", while you're in the bootloader.
Did you enabled the "OEM Unlocking" from the "Developer Options" menu?
On my device, I was able to unlock it (after enabling "OEM Unlocking" option) with "fastboot flashing unlock".
Click to expand...
Click to collapse
Thanks. Now all working I just swipe button thinking that is locking button.
About flashing problem. I cannot flash with FlashTool because I have 0x7D4 error, same as beldy. I have try different cables, 3 computer, Windows 7, Windows 8 and Windows 10 - same.
I have unlocked bootloader with "fastboot oem unlock". Without it TWRP cannot be installer or booted. Before I enabled "OEM Unlocking" from the "Developer Options" menu. After it, phone format byself but still cannot flash.
I killed pcs one and send to service. Tablet cannot go into recovery. When it back I see some scratches on cover, like was opened. Maybe they used TestPoint to fix it.
DonKapselo said:
Thanks. Now all working I just swipe button thinking that is locking button.
About flashing problem. I cannot flash with FlashTool because I have 0x7D4 error, same as beldy. I have try different cables, 3 computer, Windows 7, Windows 8 and Windows 10 - same.
I have unlocked bootloader with "fastboot oem unlock". Without it TWRP cannot be installer or booted. Before I enabled "OEM Unlocking" from the "Developer Options" menu. After it, phone format byself but still cannot flash.
I killed pcs one and send to service. Tablet cannot go into recovery. When it back I see some scratches on cover, like was opened. Maybe they used TestPoint to fix it.
Click to expand...
Click to collapse
I'm glad you've solved the problem. I dont know what is 0x7D4 error. It could be some sort of extra locking of the device, but I doubt it. It's more likely to be something related to SPFlash Tools. It could be also a broken firmware, I haven't tried to flash the firmware from the links I've provided. I only used the Original Firmware to extract the original recovery from there. I needed the original kernel from the recovery to be able to start the TWRP.
A fast look in google gives this:
Error 0×7D4
Message: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL
Meaning: SP Flash tool encountered an error writing to the phone
Solution
* Try using a different USB cord, PC port and PC
* Use the latest version of SP flash tool
* Ensure the battery is well charged and the phone's USB port isn't faulty
Click to expand...
Click to collapse
But I guess it's not very helpful.
0xAF said:
I'm glad you've solved the problem. I dont know what is 0x7D4 error. It could be some sort of extra locking of the device, but I doubt it. It's more likely to be something related to SPFlash Tools. It could be also a broken firmware, I haven't tried to flash the firmware from the links I've provided. I only used the Original Firmware to extract the original recovery from there. I needed the original kernel from the recovery to be able to start the TWRP.
A fast look in google gives this:
But I guess it's not very helpful.
Click to expand...
Click to collapse
Just try to read flash, it's safe. I can bet You will get error 0x7D4 or 2004 (depend of version of flashtool). It's extra locked for sure. Btw. why You need original recovery to start TWRP? Maybe You mean that You need it to compile TWRP for this tablet model?
DonKapselo said:
Just try to read flash, it's safe. I can bet You will get error 0x7D4 or 2004 (depend of version of flashtool). It's extra locked for sure. Btw. why You need original recovery to start TWRP? Maybe You mean that You need it to compile TWRP for this tablet model?
Click to expand...
Click to collapse
The easiest way to port TWRP is to get it from another device with the same chipset and cpu. I did not wanted to prepare a toolchain/crosscompiler and start from the beginning to compile TWRP. So I took a TWRP from another tablet (DOOGEE_X6pro_Android6.0_20160707). Since it has a recent version of TWRP and is compiled for android 6.
Then all you need is to replace the kernel in this recovery, so we are booting with the kernel for our device. I needed the kernel from our original recovery for that. Then I've touched some files inside the recovery, fixed the fstab and default.prop and repackaged the recovery image.
This is the easiest way to port the recovery IMO. Took me 15-20 mins with all the testing.
This procedure work for any recovery, not only TWRP.
I guess, I could have dumped the original recovery from the device, but since I was looking for custom recovery for some time, I found the dump in the russian forum and downloaded it. So when I decided to port TWRP, I already had the recovery from the dump.
Thanks for info Any link to step by step how to replace kernet, what data change?
DonKapselo said:
Thanks for info Any link to step by step how to replace kernet, what data change?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=hwMFBuCY-5k
I saw this video and decided to follow the steps.
You will need some intuition about the files you need to change inside the new recovery, as the video shows that only the fstab is needed, but you need more files, like default.prop and some other device dependent files from the original recovery (mostly in root folder).
In this recovery, I've used the default.prop from the original recovery.
As for the fstab, you will need to convert it by hand to a format understandable by TWRP. I've used the TWRP fstab file from the other device (from which I took the recovery in first place) and adopted it to our device. IIRC, almost nothing had to be changed.
I've copied some other device dependent files from the original recovery too.
Since I'm on linux, I've used these tools:
https://github.com/osm0sis/Android-Image-Kitchen.git
https://github.com/osm0sis/mkbootfs/
https://github.com/osm0sis/mkbootimg/
The tools are also available for windows (as the video shows) and for android itself (I believe the CF-SuperSU uses them on android to repack the boot.img).
These tools can repack recovery.img and boot.img.
Many thanks!
0xAF said:
Is your bootloader unlocked?
see the "fastboot" command manual, to check if it is unlocked.
Click to expand...
Click to collapse
yes bootloader is unlocked by command fastboot oem unlock...
It managed to someone already listed above to flash firmware in fastboot mode?
When you turn on the tablet remains lit Lenovo logo, and that's the end ...
Tablet can not even charged because, in the power cable connection tablet immediately turn on and loading TWRP or Lenovo logo screen
I am not progressed and I would appreciate if someone added original recovery or something what my tablet to function again
thx
beldy said:
yes bootloader is unlocked by command fastboot oem unlock...
It managed to someone already listed above to flash firmware in fastboot mode?
When you turn on the tablet remains lit Lenovo logo, and that's the end ...
Tablet can not even charged because, in the power cable connection tablet immediately turn on and loading TWRP or Lenovo logo screen
I am not progressed and I would appreciate if someone added original recovery or something what my tablet to function again
thx
Click to expand...
Click to collapse
Hi.
I'll make a dump of my system partition and post a link.
Unfortunately my system partition is not like in the original from the OTA ROM.
I've patched it with xposed and removed some ****ty apps from the OTA ROM.
Meanwhile if someone have OTA ROM, I would appreciate a link.
(you could try asking the Lenovo support for the OTA ROM).
0xAF said:
Hi.
I'll make a dump of my system partition and post a link.
Unfortunately my system partition is not like in the original from the OTA ROM.
I've patched it with xposed and removed some ****ty apps from the OTA ROM.
Meanwhile if someone have OTA ROM, I would appreciate a link.
(you could try asking the Lenovo support for the OTA ROM).
Click to expand...
Click to collapse
Thanks for the answer and advice to try anything that can help me
Thx
//EDIT: I add a few screens that I made an attempt to flash ... maybe you help someone ..
beldy said:
Thanks for the answer and advice to try anything that can help me
Thx
//EDIT: I add a few screens that I made an attempt to flash ... maybe you help someone ..
Click to expand...
Click to collapse
You should try to flash the dump with "fastboot flash system <file>"
Hello,
Got the Lenovo TAB3-730M.
What SuperSU.zip do I have to take to get "root"?
The "SR3-SuperSU-v2.78-SR3-20161103171345.zip" does not work.
Hi
After updating to EMUI 8.0 from this tutorial everything went well. Got Oreo working fine, so started to root with magisk = Ok; Xposed=Nok... Bootloop.
First - clean Data and Cache+Dalvik, still Bootloop
Entered to fastboot and tried to flash this file to rollback to 8.0, but...
I nottest that it said on the screen:
Bootloader UNLOCKED (in RED) and FRP Locked (In Green)
Confusing colors, cause it seems that i can't flash anything with unlocking the FRP... but i don´t have access the the system....
Also cant format System partition cause its read only, unable to flash other recovery files thought fastboot....
It s a f*cking MESS....
Can anyone please advice on this?
What can i do to recover this piece of sh*t??
Please........
Thank you, people
==============================
Well, got it figured out... But had to pay for it....
First of all:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You SUCK. Thanks for NOTHING
Lastly:
Thank YOU!!!
Long story short, i've solved it but have to pay for it.
Went to HUAWEI Service Center here in Portugal, and they told me that they couldn't do anything since the phone was not marketed for Europe (??????) [ASS Os]
I've discovered this service, and as with any other service online, i get suspicious for a while, asked a lot of questions and decided:
Bought a Month Pass for 50 EUD (45 Euros), and voila, in the first try unbricked the phone
Now i have the rest of the month to play with it...
Thanks for the people of FunkyHuawei for the kind attention (mostly pacience) they had with me.
I recommend it :good::good::good::good::good:
RSGI said:
Hi
After updating to EMUI 8.0 from this tutorial everything went well. Got Oreo working fine, so started to root with magisk = Ok; Xposed=Nok... Bootloop.
First - clean Data and Cache+Dalvik, still Bootloop
Entered to fastboot and tried to flash this file to rollback to 8.0, but...
I nottest that it said on the screen:
Bootloader UNLOCKED (in RED) and FRP Locked (In Green)
Confusing colors, cause it seems that i can't flash anything with unlocking the FRP... but i don´t have access the the system....
Also cant format System partition cause its read only, unable to flash other recovery files thought fastboot....
It s a f*cking MESS....
Can anyone please advice on this?
What can i do to recover this piece of sh*t??
Please........
Thank you, people
Click to expand...
Click to collapse
Do you still have access to twrp?
It could be only hope.
I had frp lock problem after unlocking bootloader. I had hit reset to default setting while inside developer options menu. That flipped the oem unlock switch.
I had to use twrp to flash back the stock boot.img and stock recovery.img then i was able to oem relock (my code).
And boot into room and reflip oem unlock toggle
thanks for replying
Not sure that i can access TWRP cause every time i force the recovery it appears the EMUI recovery (probably the NoCheck version that i used to update to Oreo)
Isn't it possible to reverte back to EMUI 5.1? Maybe with the 'dload' methode??
Is there any way to reset/unlock FRP from fastboot? I tried to relock bootloader with my own key but got an error (can't remember now what...)
I can't access the ROM itself...
This was because i installed Xposed....
If i could access TWRP again, perhaps i could delete the xposed files (in a recovery with the system as read-only)...
But i just dont know what to look for....
In older systems i knew that was the app_process file... Now i just dont know....
Thanks again for your reply!
help
download multi tool in pc and flash oreo beta via bootloader
i phase the same problem and it fixed my problem
RSGI said:
thanks for replying
Not sure that i can access TWRP cause every time i force the recovery it appears the EMUI recovery (probably the NoCheck version that i used to update to Oreo)
Isn't it possible to reverte back to EMUI 5.1? Maybe with the 'dload' methode??
Is there any way to reset/unlock FRP from fastboot? I tried to relock bootloader with my own key but got an error (can't remember now what...)
I can't access the ROM itself...
This was because i installed Xposed....
If i could access TWRP again, perhaps i could delete the xposed files (in a recovery with the system as read-only)...
But i just dont know what to look for....
In older systems i knew that was the app_process file... Now i just dont know....
Thanks again for your reply!
Click to expand...
Click to collapse
If you tried to install exposed from twrp, it should still be there
try dload method with emui 5 rom package, it may downgrade, no harm in trying.
Sudeep Duhoon said:
try dload method with emui 5 rom package, it may downgrade, no harm in trying.
Click to expand...
Click to collapse
Please can you explain that in detail?
Cause that might be the only way to save this (#"))&%&(/)&....
So, here is my situation:
- No TWRP access (recovery_ramdisk might be empty or damage... hopefully just empty)
- Bootloader Unlocked but FRP Locked
- eRecovery only presents 3 choices: Shutdown, Reboot and "Download latest version and recovery"*
- The System it self it's messed up after trying to install xposed.... just when its about to start, it reboots...
So.......
Still 3 ways that i can resolv this:
1 - the dload method (already tried, it updates until 5%, then error:" Install update failed" (Use the update.app file from the OTA, FullOTA, just the app file, all files in the update.zip... ) Not sure if i'm missing the right app file or if the eRecovery (maybe the NoCkeck version used to update initially) is screwed-up...
2 - Unlocking the FRP (Factory Reset Protection) this means that the "Allow OEM unlocking" is Off
Hopping to find a way to unlock it via fastboot
3 - The *Download latest version and recovery method allows to connect to wifi and download the firmware...
Not much sucess, but i know that i'm missing something (just dont know what it is...)
It seems that the router requires a certain configuration which i have no idea....
Suggestions are always welcome!
Thanks
RSGI said:
Please can you explain that in detail?
Cause that might be the only way to save this (#"))&%&(/)&....
So, here is my situation:
- No TWRP access (recovery_ramdisk might be empty or damage... hopefully just empty)
- Bootloader Unlocked but FRP Locked
- eRecovery only presents 3 choices: Shutdown, Reboot and "Download latest version and recovery"*
- The System it self it's messed up after trying to install xposed.... just when its about to start, it reboots...
So.......
Still 3 ways that i can resolv this:
1 - the dload method (already tried, it updates until 5%, then error:" Install update failed" (Use the update.app file from the OTA, FullOTA, just the app file, all files in the update.zip... ) Not sure if i'm missing the right app file or if the eRecovery (maybe the NoCkeck version used to update initially) is screwed-up...
2 - Unlocking the FRP (Factory Reset Protection) this means that the "Allow OEM unlocking" is Off
Hopping to find a way to unlock it via fastboot
3 - The *Download latest version and recovery method allows to connect to wifi and download the firmware...
Not much sucess, but i know that i'm missing something (just dont know what it is...)
It seems that the router requires a certain configuration which i have no idea....
Suggestions are always welcome!
Thanks
Click to expand...
Click to collapse
What I'm trying to understand , is how were you trying to install exposed.
I assume it was with twrp, no.
mrmazak said:
What I'm trying to understand , is how were you trying to install exposed.
I assume it was with twrp, no.
Click to expand...
Click to collapse
theres not much to understand there....
i flashed it with twrp and the phone never booted again...
yes, had access to the twrp for a while, but then, trying to run again the update process to flash the wrong recovery to recovery_ramdisk partition.... (another shot in the foot)
now i dont have twrp anymore and i'm unable to flash it cause th frp lock keeps telling thats not allowed...
the most clean way to solve this is to erase/unlock the FRP without accessing the ROM...
I'm already thinking about buy some credits with one of those online services that might unlock it...
Can you suggest to me some serious and honest services?
I'm desperate....
RSGI said:
theres not much to understand there....
i flashed it with twrp and the phone never booted again...
yes, had access to the twrp for a while, but then, trying to run again the update process to flash the wrong recovery to recovery_ramdisk partition.... (another shot in the foot)
now i dont have twrp anymore and i'm unable to flash it cause th frp lock keeps telling thats not allowed...
the most clean way to solve this is to erase/unlock the FRP without accessing the ROM...
I'm already thinking about buy some credits with one of those online services that might unlock it...
Can you suggest to me some serious and honest services?
I'm desperate....
Click to expand...
Click to collapse
Ok, I see
Didn't know you where 2 or 3 miss- steps past a failed exposed install.
I have no idea which service to recommend.
Hi,
Hope OP got his solution.
@matt4321
Honorable mod, I guess this thread belongs to Honor 7X Q&A forum. Please relocate.
Cheers
you cant downgrade from emui 8 you need to extract update.app of emui 8 an flash the ramdisk boot img so it will boot for that you need to download indian firmware mannual update given in other forum and extract the zip file update22 and data file extract both zip files and download the multi tool version 8 install all drivers boot your phone into bootloader now go to multi tool and click on unbreak and open huawie update extractor and extract update.app of data or update 22 make sure to check the mark on top emui 8 and when you click on update make sure to uncheck the verify the headder for that you go to settings in extracting update and follow the procedure of flashing for that you can google how to use multi tool i cant explain more i am not a developer but i phase the same problem and i got fixed hope i helped you
RSGI said:
Hi
After updating to EMUI 8.0 from this tutorial everything went well. Got Oreo working fine, so started to root with magisk = Ok; Xposed=Nok... Bootloop.
First - clean Data and Cache+Dalvik, still Bootloop
Entered to fastboot and tried to flash this file to rollback to 8.0, but...
I nottest that it said on the screen:
Bootloader UNLOCKED (in RED) and FRP Locked (In Green)
Confusing colors, cause it seems that i can't flash anything with unlocking the FRP... but i don´t have access the the system....
Also cant format System partition cause its read only, unable to flash other recovery files thought fastboot....
It s a f*cking MESS....
Can anyone please advice on this?
What can i do to recover this piece of sh*t??
Please........
Thank you, people
Click to expand...
Click to collapse
can't you install image from fastboot, if so try to flash rr or aosp system.img or extract from update.app
11122314 said:
download multi tool in pc and flash oreo beta via bootloader
i phase the same problem and it fixed my problem
Click to expand...
Click to collapse
Tried that but the only response that fastboot gives me is "Command not allowed" .
I just can´t flash anything in fastboot. I think i can thought adb shell dd (at least that how i manage to screw twrp partition), but i just can´t get ADB connection.
Just got fastboot connection with HiSuite drivers...
How can i get ADB access? It just installs an USB Storage Device...
Also i can try update via fastboot but it saying that it misses android-info.txt file.... whatever that means...
If i could boot once into the ROM, i would enable "Allow OEM Unlocking" and do exactly that.... btut i junt can´t... not yet...
11122314 said:
you cant downgrade from emui 8 you need to extract update.app of emui 8 an flash the ramdisk boot img so it will boot for that you need to download indian firmware mannual update given in other forum and extract the zip file update22 and data file extract both zip files and download the multi tool version 8 install all drivers boot your phone into bootloader now go to multi tool and click on unbreak and open huawie update extractor and extract update.app of data or update 22 make sure to check the mark on top emui 8 and when you click on update make sure to uncheck the verify the headder for that you go to settings in extracting update and follow the procedure of flashing for that you can google how to use multi tool i cant explain more i am not a developer but i phase the same problem and i got fixed hope i helped you
Click to expand...
Click to collapse
That was my plan... but even that is screwed-up.....
Here is my Recovery Status, without the possibility to flash any img via fastboot:
recovery_ramdisk (empty or in-error)
erecovery_ramdisk ( BND-RECOVERY-NoCheck.img flashed to update into EMUI 8.0)
With the software now, whats failling me is the ****ing recovery, that flash only 5% before it shows this error : "Install update failed!"
Dont have ADB support, maybe because i dont have the "USB Debbuging" option enable...
It seems that i will spend 15 euros to unlock this &%/())(/&%$######()/=?(/%&$#
Just thought I'd post here in case you are still in need. I believe that there are two different recovery modes - one that is triggered by holding power, up vol, and down vol, and another that is triggered by holding just power and up vol. Are you sure twrp is gone? I thought I had lost twrp when in fact it was in the other recovery.
RSGI said:
Please can you explain that in detail?
Cause that might be the only way to save this (#"))&%&(/)&....
So, here is my situation:
- No TWRP access (recovery_ramdisk might be empty or damage... hopefully just empty)
- Bootloader Unlocked but FRP Locked
- eRecovery only presents 3 choices: Shutdown, Reboot and "Download latest version and recovery"*
- The System it self it's messed up after trying to install xposed.... just when its about to start, it reboots...
So.......
Still 3 ways that i can resolv this:
1 - the dload method (already tried, it updates until 5%, then error:" Install update failed" (Use the update.app file from the OTA, FullOTA, just the app file, all files in the update.zip... ) Not sure if i'm missing the right app file or if the eRecovery (maybe the NoCkeck version used to update initially) is screwed-up...
2 - Unlocking the FRP (Factory Reset Protection) this means that the "Allow OEM unlocking" is Off
Hopping to find a way to unlock it via fastboot
3 - The *Download latest version and recovery method allows to connect to wifi and download the firmware...
Not much sucess, but i know that i'm missing something (just dont know what it is...)
It seems that the router requires a certain configuration which i have no idea....
Suggestions are always welcome!
Thanks
Click to expand...
Click to collapse
[BND-L22 / BND-AL10C675] Back to Stock / Unbrick your Honor 7X Indian Variants
Sudeep Duhoon said:
[BND-L22 / BND-AL10C675] Back to Stock / Unbrick your Honor 7X Indian Variants
Click to expand...
Click to collapse
Not even that i can do....
Let's update:
State
OS: Bootloop
System: No "recovery_ramdisk" partition (no stock / no twrp)
Bootloader: Unlocked
*FRP: Locked
So can't flash in fastboot, *Already got the unlock code for the FRP but without the "recovery_ramdisk" recovery the system wont reset....
(Weird!) No adb access in recovery mode (which would help A LOT....)
The dload method, whatever the update.app only updates until 5% , then error updating...
The eRecovery Wireless method might work, but i just dont know how to do it.
Tried with a usb pen inserted on the router with all the ROMs all together, in separated folders, whatever, no rom detected... there must be a way to do it right... i just dont know how...
Just need one of two things to happend:
Flash the stock recovery - still dont know how to do it...
Fix the bootloop and access the SO Rom - also, without adb access just dont know how...
Out of the box thinking required...
About UPDATE.APP
Can't we make a update.app much like o do it for zip files?
Would it be possible to make um UPDATE.APP just to flash/restore recovery partition?
The updates with zip files must also be inside a dload folder?
About Bootloop and SD Card
Is there a way, using the sd card, to stop the reboot, maybe enable the Safe Mode...
Something that would allowed me to access the Settings...
Any apk, any script that could be loaded from the SD card....
Not an easy plan... i know...
Maybe something very basic and easy is escaping me....
RSGI said:
Not even that i can do....
Let's update:
State
OS: Bootloop
System: No "recovery_ramdisk" partition (no stock / no twrp)
Bootloader: Unlocked
*FRP: Locked
So can't flash in fastboot, *Already got the unlock code for the FRP but without the "recovery_ramdisk" recovery the system wont reset....
(Weird!) No adb access in recovery mode (which would help A LOT....)
The dload method, whatever the update.app only updates until 5% , then error updating...
The eRecovery Wireless method might work, but i just dont know how to do it.
Tried with a usb pen inserted on the router with all the ROMs all together, in separated folders, whatever, no rom detected... there must be a way to do it right... i just dont know how...
Just need one of two things to happend:
Flash the stock recovery - still dont know how to do it...
Fix the bootloop and access the SO Rom - also, without adb access just dont know how...
Out of the box thinking required...
About UPDATE.APP
Can't we make a update.app much like o do it for zip files?
Would it be possible to make um UPDATE.APP just to flash/restore recovery partition?
The updates with zip files must also be inside a dload folder?
About Bootloop and SD Card
Is there a way, using the sd card, to stop the reboot, maybe enable the Safe Mode...
Something that would allowed me to access the Settings...
Any apk, any script that could be loaded from the SD card....
Not an easy plan... i know...
Maybe something very basic and easy is escaping me....
Click to expand...
Click to collapse
I just read through the fastboot partition from my backup using "strings" to find the available "oem" commands.
I think i found possible solution for you.
careful useing these commands as I do not know for sure if they work and what they do.
Code:
fastboot oem frp-unlock
also not sure about the dashes or underscores.
mrmazak said:
I just read through the fastboot partition from my backup using "strings" to find the available "oem" commands.
I think i found possible solution for you.
careful useing these commands as I do not know for sure if they work and what they do.
Code:
fastboot oem frp-unlock
also not sure about the dashes or underscores.
Click to expand...
Click to collapse
Hi
Thank you for replying.
Already tried that.... Actually the command should be:
Code:
fastboot oem frp-unlock (unlock frp key)
Bought the unlock code from an online unlock store.
Spent 10 euros. The code is correct cause i got the message that the device will reboot and do a factory reset.
Than it reboots into an error screen, cause i screwed up the "recovery_ramdisk" partition earlier and its not working now. So, no factory reset, no changing the Frp status... Still locked.
Still no flashing img files from recovery... Still got the reply oficial Command Not Allowed...
But:
I'm trying to gain adb access while on eRecovery.
Than i could try to flash the stock recovery with the code dd command. From there i would unlock the Frp with the code and the Factory Reset might be enought to fix the bootloop.
Also the bootloop it self...
I wonder if there's a way to force the boot even with FC errors....
Access to the ROM software would allow me to flash the stock recovery and then make a factory reset, by changing the OEM Unlocking status
Thanks for your reply, maybe you can give me some tips on this 2 ways that i'm exploring right now.
Or some other ways that i haven't consider yet... please....
:cyclops::cyclops:
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
* Do NOT update to Pie yet if you wish to unlock bootloader in order to root.
For bootloader unlock purposes, use the H930DS Oreo KDZ versions with no later than July 2018 security patch: 20b.
Look at the names for dates in the title in that thread link. AFTER you unlock bootloader, then you can update to newer firmware (like this Pie). Flashing a newer KDZ (like to Pie) will not re-lock your bootloader.
With unlocked bootloader, then on Pie KDZ you can install TWRP and root.
Stable TWRP 3.3.1 is recommended by our TWRP dev for Pie.
To install TWRP (or re-install TWRP on Bootloader Unlocked Pie) and root, PLEASE follow these instructions for success!
* If you've already updated to Pie with locked bootloader, see post #3 for instructions on how to downgrade to earlier Oreo firmware to first unlock bootloader. Or downgrade back to most recent Oreo because you decided you don't like Pie.
* If you have no desire to unlock bootloader or your bootloader is already unlocked, see full image KDZ and KDZ-based TWRP-flashable zips below.
* ALSO do NOT update to LG stock Pie yet if you wish to run LOS-16 "Pie" custom ROMs -- at least for now. See REASON HERE. Stock Pie update conflicts with LOS-16 Pie, even if you downgrade back to stock Oreo. After stock Pie update, your phone has been permanently changed/degraded when going back to Oreo for custom ROMs. Using Permissive kernel can overcome some of those issues, but you have been warned.
Whereas you do need to update to stock Pie first as a foundation before trying to install "Android 10" LOS-17 custom ROMs. However, those ROMs are still unfinished work in progress -- so if you don't like them and want to go back to the older stable LOS-16 "Pie" custom ROMs, then you've totally ignored the warning above. Again, stock Pie makes permanent changes.
NOTE: After installing Pie, if you get weird lag,
* try this fix. Just make a backup in LG Bridge. Nothing else. Somehow CREATING the backup (but not actually using it to restore anything) re-sets some stuff in Pie, so it acts like it should? I know it sounds strange but it works. Thanks to @thefpspower for the tip!
* OR If that doesn't work or you don't have access to PC, try this: go to Settings> Restart & Reset> Reset App Preferences. Thanks to @HoussiLAM for that tip. Both may do the exact same thing, I've not experimented to see.
If you want LG FM Radio app, then download from here and install.
[H930DS][STOCK][PIE]LG V30+ INDIA H930DS30b_00_OPEN_ESA_DS_OP_0903.KDZ
3.1GB
ONLY for H930DS, H930, H930G, H930D! Do NOT ask if others can flash this!
DOWNLOAD LINKS:
* Android File Hosts MIRROR
* LG-Firmwares MIRROR
* LG Bridge MIRROR
* Mega MIRROR
(Thanks to @tech_infinity!)
* Google Drive MIRROR
(Thanks to @ankurpandeyvns!)
md5: 43456a7c461237a278334503692f61ba
TWRP FLASHABLE VERSION (ROM):
(thanks to @seadersn!)
ONLY for H930DS, H930, H930G, H930D! Do NOT ask if others can flash this!
* Android File Hosts MIRROR
* Google Drive MIRROR
(Thanks to @seadersn!)
* Mega MIRROR
(Thanks to @tech_infinity!)
md5: 86b93b695c9b7c521368d38f70e73e18
Flash the "ROM" with latest TWRP. Flash Magisk + @JohnFawkes AnyKernel 3 RCTD Remover (root checker disabler) immediately afterwards before rebooting to system. It's just stock KDZ but in TWRP-flashable version. Not debloated nor meant to be updated in the future. It's just a very convenient mechanism to have newer stock firmware instead of using dev patched LGUP to flash partitions, etc.
This TWRP flashable zip has the new Pie encryption disabled. No encryption enforced, but you can encrypt in TWRP if you want afterwards.
The dev recommends formatting data before installing this TWRP-flashable zip: "format data before flashing, not wipe but format". That's your decision. Others have not.
* Stable TWRP 3.3.1 is recommended by our TWRP dev for Pie.
TWRP-FLASHABLE NOTES:
If those instructions above do not work for you for some reason, then go through these full blown steps (adapted from Section 6 of WTF Instructions):
a. Wipe Data – Factory Reset
b. Install – set storage to the External SD (if you have a microSD card) OR drag necessary files over from PC once in TWRP.
c. Install the TWRP-flashable zip
d. Install the latest stable Magisk zip.
e. Install @JohnFawkes AnyKernel 3 RCTD Remover (root checker disabler); this disables LG's firmware root checks, which may impede performance.
f. FORMAT DATA (Select WIPE, then FORMAT DATA, then select yes.)
Do NOT delete your OS, but you do need to FORMAT your data , not just "wipe" it this time. Otherwise you may get an encryption error when you boot up the first time. If you get any red mount errors, go back to the TWRP reboot menu and select reboot to recovery and try to FORMAT DATA again. Then, after successfully formatting...
g. Reboot – "Reboot Recovery" from TWRP reboot menu (choose to reboot back to Recovery). Now that the data partition has been formatted, TWRP needs to reload the recovery partition for usage. If you skip this step, when Magisk is installed again below, it may think that /data is still encrypted and set "preserve force encryption". This is also a good sanity check that LG encryption has been removed from /data.
h. Re-flash the Magisk zip again. (This is to make sure, due to Pie changes.)
i. Reboot – to System (NOW you are finally rebooting your phone! Until now this whole section has been done within TWRP.)
STRONG SUGGESTION: After successfully doing all this, when you finally boot back to LG Pie, install an app like this to easily facilitate rebooting to TWRP recovery in the future: Recovery Reboot. Allow it root privileges when asked by Magisk and put icon shortcut on your desktop.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, please make another TWRP backup.
___________
Here's how to flash with LGUP:
----------------------------
UPGRADING LG V30/V30+/V30S TO PIE KDZ FIRMWARE WITH LGUP
1) Go into download mode (power off completely, then hold volume up button while plugging in USB cable)
2) open patched LGUP and flash PIE KDZ either via UPGRADE (to keep your data, but see Note about TWRP) or via REFURBISH or PARTITION DL. If the latter, then in the pop up box "Select All". Use the attached patched LGUP in this post.
* NOTE: YOU CAN NOT USE LGUP "UPGRADE" IF YOU HAVE TWRP CUSTOM RECOVERY. LGUP "Upgrade" is like a manual OTA and is only for pure stock (but you can have unlocked bootloader). If you have TWRP custom recovery and want to use LGUP, then use PARTITION DL OR REFURBISH which will NOT keep your data and will wipe out TWRP. Or use the TWRP-flashable zip (ROM) instead of LGUP, which will keep your data and will keep TWRP.
3) IF your bootloader is unlocked, it will remain unlocked. If it's not unlocked, then you will just be updating to Pie -- but will have to temporarily downgrade to early Oreo if you ever want to unlock bootloader for root.
_________________
HOW TO INSTALL DEV PATCHED LGUP
0. UNINSTALL any prior LGUP version. Seriously. Go to Programs folder and delete the LGUP folder if you must.
1. DOWNLOAD THIS DUAL VERSION OF DEV PATCHED LGUP, made by @tecknight:
https://androidfilehost.com/?fid=11410963190603845019
(Or use attached file from bottom of this post. Thanks to @tecknight! Please go here and click the THANK BUTTON!)
2. Extract LGUP_DualMode.zip to a folder on your PC.
3. Browse into the folder and launch LGUP_Store_Frame_Ver_1_14_3.msi.
Follow the prompts to complete the install.
4. In that folder, right click and select "Run as Administrator" on "SetDev.bat" to set LGUP to developer mode. READ THAT AGAIN.
5. Launch LGUP using the desktop shortcut. NOT from folder icon!
As mentioned before, use UPGRADE, REFURBISH or PARTITION DL modes. REFURBISH and Partition DL are probably best.
WARNING: In LGUP do NOT go messing with modes not mentioned in these instructions. Especially do NOT use Chip Erase.
I don't care what anyone else tells you. If you listen to them, let them help you recover from messing up your phone.
https://9to5lg.com/lgup-1-15-manual-how-to-unbrick-restore-your-lg-devices-with-lgup/
3) ChipErase: Dangerous, This will erase IMEI/efs, Do not try this if you do not have a NV backup.
Click to expand...
Click to collapse
It's all fairly easy. Most people breeze right through this. But if you have any problems, go through this list:
Make sure you in download mode BEFORE opening the patched LGUP file.
This is at the top of the list as some people forget to do that. The remainder are in no particular order. If that doesn't work,
Try different USB port,
Try different USB cable,
Try different computer.
Reinstall LG mobile drivers on your PC.
Reinstall dev patched LGUP again.
Reboot the computer.
If you ask for help, that's the list of items we are going to give you anyway.
HOW TO (temporarily) DOWNGRADE BACK TO OREO FOR BOOTLOADER UNLOCK
(or DOWNGRADE BECAUSE YOU DON'T LIKE PIE)
1) DOWNLOAD FIRMWARE AND DEV PATCHED LGUP
* Download Oreo KDZ you wish to install -- for bootloader unlock would be H930DS 20b.
(If you just don't like Pie, then choose the most recent KDZ in that thread, which is at the top.)
* DOWNLOAD THIS DUAL VERSION OF DEV PATCHED LGUP, made by @tecknight:
https://androidfilehost.com/?fid=11410963190603845019
(Or use attached file from bottom of this post. Thanks to @tecknight! Please go here and click the THANK BUTTON!)
_________________
2) INSTALL DEV PATCHED LGUP
1. Extract LGUP_DualMode.zip to a folder on your PC.
2. Browse into the folder and launch LGUP_Store_Frame_Ver_1_14_3.msi.
Follow the prompts to complete the install.
3. In that folder, right click and select "Run as Administrator" on "SetDev.bat" to set LGUP to developer mode
4. Launch LGUP using the desktop shortcut.
Choose Process : PARTITION DL or REFURBISH
----------------------------
3) DOWNGRADING ANY LG V30/V30+/V30S TO EARLIER OREO KDZ FIRMWARE
1) Go into download mode (power off completely, then hold volume up button while plugging in USB cable)
2) open patched LGUP and flash OREO KDZ to DL PARTITION mode. In the pop up box "Select All". Use the attached patched LGUP in this post.
You can also use REFURBISH mode, if you wish.
3) Master Reset (post 101 of Frankenstein thread)
5) DONE.
It's fairly easy. Most people breeze right through this. But if you have any problems, go through this list:
Make sure you in download mode BEFORE opening the patched LGUP file.
This is at the top of the list as some people forget to do that. The remainder are in no particular order. If that doesn't work,
Try different USB port,
Try different USB cable,
Try different computer.
Reinstall LG mobile drivers on your PC.
Reinstall dev patched LGUP again, making sure the files are placed where they need to go (LG Electronics folder, etc).
Reboot the computer.
If you ask for help, that's the list of items we are going to give you anyway.
WARNING: In LGUP do NOT go messing with modes not mentioned in these instructions. Especially do NOT use Chip Erase.
https://9to5lg.com/lgup-1-15-manual-how-to-unbrick-restore-your-lg-devices-with-lgup/
3) ChipErase: Dangerous, This will erase IMEI/efs, Do not try this if you do not have a NV backup.
Click to expand...
Click to collapse
_________________
4) IF YOU NEED TO UNLOCK BOOTLOADER (with early Oreo), GO READ WTF INSTRUCTIONS
ROOT Your LG V30!
https://forum.xda-developers.com/lg-v30/how-to/root-v30-t3927154
Sticky everyone should read.
____________
EXTRAS
If you root with stock Pie KDZ (after unlocking bootloader in early Oreo), then you will need to flash Magisk modules or manually edit build prop to get root-enabled DTS, Equalizer, and lockscreen weather animations. Dual Speaker mode gives you audio directed at your face, besides the main downward facing speaker. High Impedance Mode give you more volume.
(NOTE: The TWRP flashable zips already have this, thanks to the devs who make them.)
* Fully enable LG DTS 3D stereo (root needed) + Equalizer
* LG V30 Lockscreen EXTRA Weather Animations Enabler
* DUAL SPEAKER MODE + HIM (High Impedance Mode)
SETTINGS
I know everyone has their own settings, but for new owners who want a reference point for all the various submenus and customization, I'll share screenshots of my settings. You can always change to what you like.
https://photos.app.goo.gl/NCm643Y7prJhDLaS2
In post #2, the for 30b the LG Bridge server link is active. The other mirrors will be up within 24 hours.
FYI: @seadersn
EDIT:
AFH mirror is now up.
Google Drive mirror is now up.
LG-Firmwares mirror is now up. They are using "30b", like I have.
@ChazzMatt Here's a mega mirror of the kdz file.
https://mega.nz/#F!XBd0wAoT!MQpZReO7TxG6RYUdgQ3zEg
PS: Thanks for making such a detailed thread as always :fingers-crossed:
@ChazzMatt when can I get the TWRP flashable version??
Thanks for the great work.
vamsi37 said:
@ChazzMatt when can I get the TWRP flashable version??
Thanks for the great work.
Click to expand...
Click to collapse
Not available yet
I am in twrp version of eu pie can I update by lgup to this version
vamsi37 said:
@ChazzMatt when can I get the TWRP flashable version??
Thanks for the great work.
Click to expand...
Click to collapse
We have great devs who make our TWRP-flashable zips, but they do it in their spare time. @seadersn will probably create this one, as he also created the one for the EU H930. @JohnFawkes may assist.
pdpmoto said:
I am in twrp version of eu pie
can I update by lgup to this version
Click to expand...
Click to collapse
Yes, as long as you read this in post #2:
"If you have TWRP custom recovery and want to use LGUP, then use PARTITION DL OR REFURBISH which will NOT keep your data and will wipe out TWRP."
You would flash full KDZ in Partition DL (all partitions) or Refurbish mode. Your bootloader will still be unlocked. Once on Pie then you would use fastboot commands to re-install TWRP and the three root files (encyrption disabler, no root check, Magisk).
I have this Instructions post (linked in post #1 of this thread) just for this scenario. Here it is again:
REINSTALL TWRP AND ROOT ON PIE KDZ
https://forum.xda-developers.com/showpost.php?p=79972584&postcount=3287
ChazzMatt said:
We have great devs who make our TWRP-flashable zips, but they do it in their spare time. @seadersn will probably create this one, as he also created the one for the EU H930. @JohnFawkes may assist.
Yes, as long as you read this in post #2:
"If you have TWRP custom recovery and want to use LGUP, then use PARTITION DL OR REFURBISH which will NOT keep your data and will wipe out TWRP."
You would flash full KDZ in Partition DL (all partitions) or Refurbish mode. Your bootloader will still be unlocked. Once on Pie then you would use fastboot commands to re-install TWRP and the three root files (encyrption disabler, no root check, Magisk).
I have this Instructions post (linked in post #1 of this thread) just for this scenario. Here it is again:
REINSTALL TWRP AND ROOT ON PIE KDZ
https://forum.xda-developers.com/showpost.php?p=79972584&postcount=3287
Click to expand...
Click to collapse
Thanks, but using lgup to flash kdz and again using fastboot commands to flash TWRP will erase my internal storage. So I'll be waiting for flashable zip.
?
vamsi37 said:
Thanks, but using lgup to flash kdz and again using fastboot commands to flash TWRP will erase my internal storage. So I'll be waiting for flashable zip.
?
Click to expand...
Click to collapse
Sure. I was replying to two different questions, that involved TWRP.
Drive Mirror: https://drive.google.com/open?id=1BSfUWjut39FUn_3ZDoNJhDBRzQ9rKarm
Hi ChazzMatt,
Yesterday night I installed the pie kdz and the process went butter smooth. Thank you very much.
Trouble started afterwards. Initially it was very slow, so slow that sometimes I thought it has hanged which got little better with time.
After sometime, I tried to install root. First installed twrp, booted to twrp. But, twrp can not mount data. It says system decrypt.
I did a factory reset, did not set any password, again tried twrp (using adb/fastboot). But it still can not mount and decryption fails
with whatever password.
Any idea what I might be doing wrong? Just to inform, when first time I installed the pie kdz, I didnt do the factory reset
girishv said:
Hi ChazzMatt,
Yesterday night I installed the pie kdz and the process went butter smooth. Thank you very much.
Trouble started afterwards. Initially it was very slow, so slow that sometimes I thought it has hanged which got little better with time.
After sometime, I tried to install root. First installed twrp, booted to twrp. But, twrp can not mount data. It says system decrypt.
I did a factory reset, did not set any password, again tried twrp (using adb/fastboot). But it still can not mount and decryption fails
with whatever password.
Any idea what I might be doing wrong? Just to inform, when first time I installed the pie kdz, I didnt do the factory reset
Click to expand...
Click to collapse
Read first paragraph of this thread again and you might know what you did wrong. I assume here that you didn't unlock bootloader before installing Pie.
girishv said:
Hi ChazzMatt,
Yesterday night I installed the pie kdz and the process went butter smooth. Thank you very much.
Trouble started afterwards. Initially it was very slow, so slow that sometimes I thought it has hanged which got little better with time.
After sometime, I tried to install root. First installed twrp, booted to twrp. But, twrp can not mount data. It says system decrypt.
I did a factory reset, did not set any password, again tried twrp (using adb/fastboot). But it still can not mount and decryption fails
with whatever password.
Any idea what I might be doing wrong? Just to inform, when first time I installed the pie kdz, I didnt do the factory reset
Click to expand...
Click to collapse
Sounds like you didn't flash the decryption disabler file or at least the NEWER (Pie) decryption disabler. Which means you also may not have flashed the newer root check disabler file?
There's a link for Pie TWRP/root Instructions near top of post #1 of this thread. The steps and files have changed for Pie KDZ.
I also posted it again top of this current page... And here it is again.
All necessary files are attached to that post.
INSTALL/REINSTALL TWRP AND ROOT ON PIE KDZ
https://forum.xda-developers.com/showpost.php?p=79972584&postcount=3287
Hey , I'm on pie v29g-global with June security patch, can I update it with this Indian pie?
oofyrey said:
Hey , I'm on pie v29g-global with June security patch, can I update it with this Indian pie?
Click to expand...
Click to collapse
Do you have an H930 variant? What model do you have?
This KDZ is only for LG H930 variants, preferably H930DS or H930D. But technically is compatible with all H930 variants (like H930, H930G) -- as long as you understand non-dual SIM H930 variants will see "ghost" second SIM card icon in status bar.
Also it's meant for India/ESA region, so there may be some regional differences you don't need -- like LG India app, if you don't live in India.
29G? Was that some failed Pie beta? There's no H930 variant KDZ with that kind of numbering...
For all V30 variants, actual official LG Pie KDZ releases (not buggy betas) start with "30" for every variant -- except Sprint which apparently can't count correctly.
Thanks for the reply.
But, how can I flash them when it do not mount any system. I can not even drag them from PC
Can you please give me a detailed new steps for pie kdz.
On another note, I am getting lot of "system UI stopped working" errors and some times its so slow, I thought of throwing it at a wall.
ChazzMatt said:
Sounds like you didn't flash the decryption disabler file or at least the NEWER (Pie) decryption disabler. Which means you also may not have flashed the newer root check disabler file?
There's a link for Pie TWRP/root Instructions near top of post #1 of this thread. The steps and files have changed for Pie KDZ.
I also posted it again top of this current page... And here it is again.
All necessary files are attached to that post.
INSTALL/REINSTALL TWRP AND ROOT ON PIE KDZ
https://forum.xda-developers.com/showpost.php?p=79972584&postcount=3287
Click to expand...
Click to collapse
First, as you might now, I am not liable if your phone would be bricked or damaged after this tutorial.
This method has worked perfectly for on my phone, which: OnePlus Nord N10 5G from Metro by T-Mobile. Build Number: 11.0.1.BE88CF. And it should work any rom stock
This tutorial is inspired by andreas__ from this topic. I recommend to take a quick glance before processing here.
General Info:
You need adb and fastboot installed and should know how to use it
You must do this process only once, afterwards you can follow the OTA survival steps
You need to factory hard reset the phone (very important)
Unlock the bootloader
If you are using locked metro by T-Mobile phone, make sure to request the "unlock token" in order to unlock the bootloader.
Google "How to Unlock Bootloader on OnePlus Phones | Unlocked and T-Mobile Variants" for the instructions
After you have unlocked the bootloader using this command:
Code:
fastboot oem unlock
The data will be wiped and it will do the factory reset
Create the boot image:
You need to pull out a clean boot image from your phone. I have used TWRP to do that
flash the latest twrp for this phone:
[TWRP][3.5.2_10][Billie]TWRP for Oneplus Nord N10 5G [BETA]
Use this command to flash it:
Code:
fastboot flash recovery Twrp_3.5.2-10_EduardoA3677-billie_OxygenOs11_Android11.img
boot the phone to twrp recovery, then head to:
Backup > select "Boot (96MB)" > Swipe to Backup
The boot image will be generated in the internal storage under the name "boot.emmc.win"
root and patch the image:
Restart the phone to the system, then download the latest magisk app
Make sure to allow "USB debugging" from the developer Options
Install and open the magisk app then tap on "install" (very top)
tap on "select and patch a file"
select "boot.emmc.win" which is the image that was generated by twrp
Magisk will patch it and place it in the download folder under the name "magisk_patched-23000_Obpf5.img"
Copy the patched image into ADB folder in your PC
flash the patched image:
Reboot the phone into bootloader mode
Then flash the patched image:
Code:
fastboot flash boot magisk_patched-23000_Obpf5.img
Reboot the phone into the system
Hurray! your phone now is officially rooted. You're welcome
I hope you find my instructions useful.
Reserved !!
hamooz92 said:
First, as you might now, I am not liable if your phone would be bricked or damaged after this tutorial.
This method has worked perfectly for on my phone, which: OnePlus Nord N10 5G from Metro by T-Mobile. Build Number: 11.0.1.BE88CF. And it should work any rom stock
This tutorial is inspired by andreas__ from this topic. I recommend to take a quick glance before processing here.
General Info:
You need adb and fastboot installed and should know how to use it
You must do this process only once, afterwards you can follow the OTA survival steps
You need to factory hard reset the phone (very important)
Unlock the bootloader
If you are using locked metro by T-Mobile phone, make sure to request the "unlock token" in order to unlock the bootloader.
Google "How to Unlock Bootloader on OnePlus Phones | Unlocked and T-Mobile Variants" for the instructions
After you have unlocked the bootloader using this command:
Code:
fastboot oem unlock
The data will be wiped and it will do the factory reset
Create the boot image:
You need to pull out a clean boot image from your phone. I have used TWRP to do that
flash the latest twrp for this phone:
[TWRP][3.5.2_10][Billie]TWRP for Oneplus Nord N10 5G [BETA]
Use this command to flash it:
Code:
fastboot flash recovery Twrp_3.5.2-10_EduardoA3677-billie_OxygenOs11_Android11.img
boot the phone to twrp recovery, then head to:
Backup > select "Boot (96MB)" > Swipe to Backup
The boot image will be generated in the internal storage under the name "boot.emmc.win"
root and patch the image:
Restart the phone to the system, then download the latest magisk app
Make sure to allow "USB debugging" from the developer Options
Install and open the magisk app then tap on "install" (very top)
tap on "select and patch a file"
select "boot.emmc.win" which is the image that was generated by twrp
Magisk will patch it and place it in the download folder under the name "magisk_patched-23000_Obpf5.img"
Copy the patched image into ADB folder in your PC
flash the patched image:
Reboot the phone into bootloader mode
Then flash the patched image:
Code:
fastboot flash boot magisk_patched-23000_Obpf5.img
Reboot the phone into the system
Hurray! your phone now is officially rooted. You're welcome
I hope you find my instructions useful.
Click to expand...
Click to collapse
Hate to tell you this but if using twrp just rename magisk apk to magisk zip and install zip it auto patches to the right slot for you and you just confirm the install via magisk in android
scottlam1 said:
Hate to tell you this but if using twrp just rename magisk apk to magisk zip and install zip it auto patches to the right slot for you and you just confirm the install via magisk in android
Click to expand...
Click to collapse
Exactly.
I lost root after the forced OTA on July 31/August 1. Today I followed this guide to install twrp, factory reset, then installed Magisk by renaming the APK and flashing within TWRP. However the SafetyNet check showed "Attestation Failed." I enabled MagiskHide and rebooted, and now pass SafetyNet.
Thank you for this very simple and useful guide. I was able to root with no loss of userdata, saving a lot of time that would otherwise go into creating a backup.
scottlam1 said:
Hate to tell you this but if using twrp just rename magisk apk to magisk zip and install zip it auto patches to the right slot for you and you just confirm the install via magisk in android
Click to expand...
Click to collapse
I don't understand
bgfal3 said:
I don't understand
Click to expand...
Click to collapse
They are saying rename magisk from apk to zip and flash it in TWRP
bgfal3 said:
I don't understand
Click to expand...
Click to collapse
Just rename the APK to .zip extention and install through zip installer in twrp
iam almost ready to root my device i have both zip files from adreas tutorial on how root it.
where those zips files need to be in order to flash it?
cmd can be used, sorry iam new to this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3lgato said:
View attachment 5485447
Click to expand...
Click to collapse
You need to get the unlock token first
Here is the instructions:
https://www.oneplus.com/support/answer/detail/op588
raginhomosapien said:
I lost root after the forced OTA on July 31/August 1. Today I followed this guide to install twrp, factory reset, then installed Magisk by renaming the APK and flashing within TWRP. However the SafetyNet check showed "Attestation Failed." I enabled MagiskHide and rebooted, and now pass SafetyNet.
Thank you for this very simple and useful guide. I was able to root with no loss of userdata, saving a lot of time that would otherwise go into creating a backup.
Click to expand...
Click to collapse
Glad it worked for you. You're welcome
Why it wait forever for attached device, even removing and reconnecting phone?
Rulesless said:
View attachment 5568509
Why it wait forever for attached device, even removing and reconnecting phone?
Click to expand...
Click to collapse
You have to be in fastboot mode before you can flash the recovery. Reboot into fastboot by typing "adb reboot fastboot" (without the quotes). Your phone should then reboot into fastboot mode. NOW, assuming you have already unlocked your bootloader, you can flash the recovery.
If anyone is still having the OEM unlocking greyed out issue, you need to do the device unlock from your phone, select request permanent unlocks then your device will reboot, from there you can then head back into dev options and you will be able to OEM unlock. Hope this helps seems not a lot of people realize this I hunted for the answer all over only to happen upon it when I was about to say forget it.
wcoolj said:
If anyone is still having the OEM unlocking greyed out issue, you need to do the device unlock from your phone, select request permanent unlocks then your device will reboot, from there you can then head back into dev options and you will be able to OEM unlock. Hope this helps seems not a lot of people realize this I hunted for the answer all over only to happen upon it when I was about to say forget it.
Click to expand...
Click to collapse
Just to add to this.....If you are unable to use device unlock because you have not met your carrier's requirements to do so yet you can use the script at this thread and it will open up oem unlock even if your phone is not eligible yet.
I have the N20. No twrp. Flashed a patched boot.img and lost radios. No wifi Bluetooth or sim)mobile data. Hoping that the platform is similar enough that someone could help me recover my device. Phone was sim locked, not sure if that's the issue. I forgot to run the command from the debloat script after flashing the unlock token, shouldn't have rushed this. I don't have a backup of anything though. Was trying to get root to back up everything. Factory resetting did nothing to fix the issue
PsYk0n4uT said:
Factory resetting did nothing to fix the issue
Click to expand...
Click to collapse
LOL never does at this level, just wipes cache and user partition, but nothing of value where we play- the assumption is you (or the bad guys) can't figure out how to write to the system, boot, etc partitions. (snicker).
So the good news is if you can find the EDL image, and follow the procedure to reflash the phone... it should restore everything for you.
(To be clear @PsYk0n4uT I linked you to the N10 EDL thread, not the N20...)
Thanks. So my issue so far. I don't think there is even a stock firmware posted anywhere. Though there is a backup of another device posted. How would I go about finding the EDL files for mine? Can one be created? Or would I need to source that from OnePlus or wait on someone to do that? I actually wasn't aware that I could boot the boot omg without flashing it to test it out first