Develop Bugs

[Q] port Statusbar of CZLB4 to any other FW

is it possible to port the statusbar with PacketData of CZLB4 to any other Firmware?

flo2204 said:
is it possible to port the statusbar with PacketData of CZLB4 to any other Firmware?
Click to expand...
Click to collapse
Quick Panel (status bar) is controlled by many files:
1) Rsrc1 > System > Rsrc > Black:
- QuickPanelBmp.rbm
- VoiceMemoQuickPanel.rbm (?)
2) ShpApp > SystemFS > SHP > QuickPanelApp.so (and also code in GeneralSoInfo.so.sig)
3) CSC (this is the problem! ) > CSCrcs > SystemCSC > String > QuickPanel.rsr
So, I try to change those files, but I'm not able to change status bar, maybe because there are other files that I don't know, or maybe because it's not possible to change those files (Wave loop, restart again and again).
Someone can help us?
Thanks!

thx for testing
did you tried to replace these files with the files of the CZLB4
sry can't test it myself at the moment

Tested.It gives boot loop

I tested it too. No problem with RCS (QuickPanel.rsr), and RC1(*.rbm) files
the problem is code in QuickPanel.so is not compatible with some others libraries
We can compare so from with and without 5th option and then edit code to fitbut who dares?
For me better option would be GPS on/off

How ? Just waiting for you

thx for testing

b.kubica said:
I tested it too. No problem with RCS (QuickPanel.rsr), and RC1(*.rbm) files
the problem is code in QuickPanel.so is not compatible with some others libraries
We can compare so from with and without 5th option and then edit code to fitbut who dares?
For me better option would be GPS on/off
Click to expand...
Click to collapse
I prefer "Data" But thanks for your work!
Do you think it's possible to make compatible QuickPanel.so? Thank you so much b.kubika!

in the QuickPanel.rsr of zclb4 is the "Data Button" called "IDS_QP_BUTTON2_DATA_ON_OFF"
this file should be somewhere
if we find this file we could add this to another fw
and in any other file should be something which load the command for enable or disable these things
Edit1:
what about to replace in the customFW "GeneralSoInfo.so.sig" the signature of the Custom with the ZCLB4 and then replace the "QuickPanelApp.so" with ne ZCLB4?

.rsr file is not the problem
I edited that file to make it support my own language and got the boot loop too
So please be quite for a while and let b.kubica do his magic
Yes it is .so file issue & I don't have enough skills to deal with it
Best Regards

its not a file, just string ID
Some steps:
1. change RCS - QuickPanel.rsr from ZC work on XX - only strings are missed but phone works
2. change RC1 - 2 *.rmb files - phones works normally, only graphics are missed
3. change *.so file - phone won't start normally - boot loop
some libraries from XX are not compatible with QuickPanel.so from ZC
that's all for now

b.kubica said:
its not a file, just string ID
Some steps:
1. change RCS - QuickPanel.rsr from ZC work on XX - only strings are missed but phone works
2. change RC1 - 2 *.rmb files - phones works normally, only graphics are missed
3. change *.so file - phone won't start normally - boot loop
some libraries from XX are not compatible with QuickPanel.so from ZC
that's all for now
Click to expand...
Click to collapse
Thanks kubika I'm sad
However I've got two Samsung Wave, one is the tester! If you want you can use it.

ok thx

Any News ?

i'd like to try somethink but i need the wave of my friend
maybe in 1 or 2 days...

Still no solution?

I have seen some CFWs that already added it, anyone know?

(mod) Speed up GPS with tweak

With the small tweaks in GPS.config , now your device will have faster gps, and finds the satellite quickly .
Instruction: For this to work your device must be rooted and should have root explorer or any file manager with root acess installed.
Download the file below and then extract it and choose the appropriate gps.config file according to your location and paste it into root/system/etc/ and set permission rw-r-r
download link

neat, thanks!

Hi,
this mod is very old, look on search function and find out many more GPS tweak threads
regards
starbase64

[Q&A] [MOD] Camera_Mod Bitrate/FPS/Image Quality - 7|27|14

Q&A for [MOD] Camera_Mod Bitrate/FPS/Image Quality - 7|27|14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

noob help!
How To Install:
Extract the ZIP
Use a file manager to Copy/Paste & overwrite the media_profiles.xml to the "/system/etc/" directory
Make sure the media_profiles.xml has permissions set to "rw- r-- r--"
Reboot
When I found myself on the portion to "paste and overwrite" it would not allow me (using ES File Explorer). I didn't know how to proceed. Can anyone help? Also, while we're at it, can someone please explain how to set the permissions?
Not a very tech savvy person, and this is my first Android/ROOT. Any help is much appreciated!:good:

Anyone tried this mod on Lollipop 5.0?

bunchies -- could you please post the stock LGCameraApp.apk and odex
bunchies -- could you please zip up and post the stock LGCameraApp.apk and odex you used when making your modded xml? I was messing around with a few camera mods and lost track of where I saved my originals. Since I'm not bootlooped I'd like to try to find a set before I restore the whole image and start from scratch.
Thanks for your work.

Finally!
I got it all working. Unless you edit the camera_config.xml and add in the video size rear supported the [email protected], all videos will show as 30fps. Always check your permissions after saving (rw- r-- r--). Dont change the front camera settings because the camera will keep crashing. I tested both 1080p variants (30fps & 60fps) with fraps and mediainfo and both are as they should and at 40Mbps bit rate. LG G3 D855 European version,

Solution to Boot stock / Problems
First of all, thanks for the mod! (it work as well on KK)... but i have a problem on Lollipop.
For those who have a problems like soft-brick, bootloop, bootstock or similar after the mod xml, my solution was:
Need: TWRP Installed / ROOT / ES File Explorer
Backup the original media_profiles.xml before rewrite with the mod (by the way, in the first post is the original)
Write the mod (steps in the first comment)
Reboot.
(If the problem occurs... continue)
Boot in Recovery Mode with TWRP
Select Mount > Mount System
Back to main menu and select Advanced > File Manager
Restore the original
Reboot!
It works to me, and no restore needed, hope can i help.

Please help LG G3
Hi there,
I did try to install the camera mod on my LG G3 and something is wrong
After following the simple instructions on how to mod the camera and rebooting the phone my LG does not goes pass the starting logo of LG. LED is indicating and blinking but it does not start up at all. Probably the reason of by phone behaving like this is that I have the latest version of software (Lolipop). Does someone of you experts have any idea how to fix this? Tnx in advance
P.S.
I changed the name of original file media_profiles.xml in "/system/etc/" for just in case before i did copy media_profiles.xml to the "/system/etc/" .
Than I set permissions to "rw- r-- r--"
and reboot
Thats all

SM-J5108 5.1.1 AccuweatherPhone2015_HD Deodexed

J5108ZHU1APD2
Use Root Explorer (File Manager)
....
The full date on the weather widget language Russian and English UK
....
Installation AccuweatherPhone2015_HD and WeatherDaemon2015
1) system/app delete the two folders AccuweatherPhone2015_HD and WeatherDaemon2015
2) move the two folders AccuweatherPhone2015_HD and WeatherDaemon2015 in system/app and set permissions
3) reboot the phone

Thread closed at OP's request

Change Mi A1 camera watermark manually

This is Vasu Netha and What's going on everybody!!
Here is a short demo on how to change default camera watermark to your own.
Requirements
Rooted device
Root explorer (any of your wish, like es file explorer)
Any image editor (I recommend Adobe Photoshop in your PC. Or else any mobile image editor like picsart may work)
Some Patience
Step wise Instructions
give root permissions to your file manager (In my case, I used es explorer)
Navigate to System/etc/ and find dualcamera.png file
Copy the file and paste somewhere else in your device (for sake in storage/emulated/0/Download ). We are going to use it as a reference image on which we should work later
Open the file u saved (in this case in Download folder) in Adobe Photoshop or whichever editor you like.
This is where actual purpose comes in, put your creativity in it and edit the image as you like.
*Important notice DONT CHANGE PICTURE SIZE OR RESOLUTION & SAVE THE IMAGE IN PNG FORMAT
Rename the file to dualcamera.png
Copy your edited file and paste it in system/etc/
Overwrite the existing file and change the permissions to rw-r--r--
Voila!! you have done it
Reboot your phone, open the camera app, enable watermark & see the changes
Hit thanks :good: if it works for you
Check my custom watermark in the attachments section.

Any example of the watermark you have created?
Sent from my SM-A520F using Tapatalk

amlbuton said:
Any example of the watermark you have created?
Sent from my SM-A520F using Tapatalk
Click to expand...
Click to collapse
Add "https://" in front of below text and check out
drive.google.com/file/d/0B6iT8gjsA88ASkF1eW0xeG5ucHM/view?usp=drivesdk
I was unable to paste link.. :crying: so please do add "https:// to the above text for now

I don't know how to attach images in XDA thread.
Please anyone let me know. Thanks in advance

Why not use this app directly instead
https://forum.xda-developers.com/mi-a1/themes/camera-watermark-editor-t3689342

bro font name

For Gcam i want watermark how to do it