Develop Bugs

Can anyone prove me marshmallow latest update stock firmware ? MOB31E ?

Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?

vivek1310yadav said:
Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?
Click to expand...
Click to collapse
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread

sachin n said:
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread
Click to expand...
Click to collapse
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)

pra27 said:
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)
Click to expand...
Click to collapse
Do you've twrp recovery installed at the moment?

sachin n said:
Do you've twrp recovery installed at the moment?
Click to expand...
Click to collapse
No it is not even unlocked yet.

pra27 said:
No it is not even unlocked yet.
Click to expand...
Click to collapse
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk

sachin n said:
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
You mean after this I can file LP flash files?
No downgrading bootloader issues right?

pra27 said:
You mean after this I can file LP flash files?
No downgrading bootloader issues right?
Click to expand...
Click to collapse
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.

sachin n said:
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.
Click to expand...
Click to collapse
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/

pra27 said:
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/
Click to expand...
Click to collapse
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!

sachin n said:
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!
Click to expand...
Click to collapse
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.

pra27 said:
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.
Click to expand...
Click to collapse
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot

sachin n said:
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot
Click to expand...
Click to collapse
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.

pra27 said:
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.
Click to expand...
Click to collapse
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs

sachin n said:
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs
Click to expand...
Click to collapse
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?

pra27 said:
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?
Click to expand...
Click to collapse
Disable Gplay services notifications. Or Just download and flash MOB31E stock Rom. Zip
Sent from my mido using XDA Labs

Hi there
I have the same problem and my phone is stuck at the boot screen.
My phone does not allow me to enable USB debugging and I am really stuck with being able to install TWRP and flash the stock ROM.
I'm incredibly confused and am unsure what I am doing. Attached is a screenshot of the CMD box.
Help and simple instructions would be appreciated.
Thanks in advance.

Help I bricked my Moto Z play

I flashed the wrong bootloader so fastboot does not work. I still have TWRP Working but anything I flash does not boot. I am looking for a full factory OTA that I can flash via TWRP so it will re-flash the proper bootloader and all the other factory images so I can un-brick it through fastboot. I have tried to flash many different update files but it gives an error 7 and says to be on 6.0.1 or 7.0 before installing it. Can someone please help me un-brick this or link a full OTA that I can flash via TWRP. I attached the bootloader.img so if anyone could make a flashable zip to flash the stock bootloader that would probably work.

vibraniumdroid said:
I flashed the wrong bootloader so fastboot does not work. I still have TWRP Working but anything I flash does not boot. I am looking for a full factory OTA that I can flash via TWRP so it will re-flash the proper bootloader and all the other factory images so I can un-brick it through fastboot. I have tried to flash many different update files but it gives an error 7 and says to be on 6.0.1 or 7.0 before installing it. Can someone please help me un-brick this or link a full OTA that I can flash via TWRP. I attached the bootloader.img so if anyone could make a flashable zip to flash the stock bootloader that would probably work.
Click to expand...
Click to collapse
Follow this discussion.
"https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492"

ROM_HUNTER said:
Follow this discussion.
"https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492"
Click to expand...
Click to collapse
does not work

vibraniumdroid said:
does not work
Click to expand...
Click to collapse
If fastboot works then you're not hard bricked, most likes soft brick. I would suggest flashing magisks 14 after you flash the rom as dm-verity will check if your system is modified , dm-verity needs to be disabled

flashallthetime said:
If fastboot works then you're not hard bricked, most likes soft brick. I would suggest flashing magisks 14 after you flash the rom as dm-verity will check if your system is modified , dm-verity needs to be disabled
Click to expand...
Click to collapse
I already tried flashing magisk. Also I can boot into the bootloader but the computer does not see it in fastboot anymore (probably because I flashed the bootloader.img for the moto z play droid accidentally)

vibraniumdroid said:
I already tried flashing magisk. Also I can boot into the bootloader but the computer does not see it in fastboot anymore (probably because I flashed the bootloader.img for the moto z play droid accidentally)
Click to expand...
Click to collapse
Hard bricked for sure

flashallthetime said:
Hard bricked for sure
Click to expand...
Click to collapse
not exactly because twrp works. If I could flash fastboot images through TWRP I could un-brick it. If somebody could modify the stock rom's updater-script and remove the requirement to be running a stock rom then I could flash that and I would probably be unbricked.

vibraniumdroid said:
not exactly because twrp works. If I could flash fastboot images through TWRP I could un-brick it. If somebody could modify the stock rom's updater-script and remove the requirement to be running a stock rom then I could flash that and I would probably be unbricked.
Click to expand...
Click to collapse
Bootloader can not be flashed through twrp so you'll need to flash the bootloader through fastboot. If your device is not recognized when you plug it in your computer then you're hard bricked, if fastboot is not accessable then you're hard bricked

flashallthetime said:
Bootloader can not be flashed through twrp so you'll need to flash the bootloader through fastboot. If your device is not recognized when you plug it in your computer then you're hard bricked, if fastboot is not accessable then you're hard bricked
Click to expand...
Click to collapse
so you are sure that it is impossible to make a flashable zip of bootloader. Maybe it is just my computer I'll try booting of linux on usb and then see if fastboot can see it.

flashallthetime said:
Bootloader can not be flashed through twrp so you'll need to flash the bootloader through fastboot. If your device is not recognized when you plug it in your computer then you're hard bricked, if fastboot is not accessable then you're hard bricked
Click to expand...
Click to collapse
how do you fix a hardbrick?

vibraniumdroid said:
how do you fix a hardbrick?
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492

flashallthetime said:
Here https://forum.xda-developers.com/moto-z-play/how-to/guide-unbrick-moto-z-play-t3618492
Click to expand...
Click to collapse
I tried that does not work:crying: also I got windows to see the phone as addison fastboot s but when i do fastboot devices it does not show up

vibraniumdroid said:
I tried that does not work:crying: also I got windows to see the phone as addison fastboot s but when i do fastboot devices it does not show up
Click to expand...
Click to collapse
Do you have the correct driver,, if you use Linux there is no need for the driver just install minimal ADB and fastboot

vibraniumdroid said:
I tried that does not work:crying: also I got windows to see the phone as addison fastboot s but when i do fastboot devices it does not show up
Click to expand...
Click to collapse
Have you tried using these albus (Z2 Play) blank flashes as mentioned here to repair your bootloader? https://forum.xda-developers.com/showpost.php?p=73402033&postcount=181
https://forum.xda-developers.com/showpost.php?p=73411048&postcount=206
These may hopefully get your device to the point where it's recognised in fastboot and you can then flash the stock ROM via fastboot.

vibraniumdroid said:
how do you fix a hardbrick?
Click to expand...
Click to collapse
You don't. That's why it's called a hard brick.

flashallthetime said:
Do you have the correct driver,, if you use Linux there is no need for the driver just install minimal ADB and fastboot
Click to expand...
Click to collapse
booted of linux from a usb and that worked thanks

Moto g6 forge (XT1922-9) bricked

okay so i am pretty new still to flashing firmwares and using fastboot in general. I have the cricket version of the moto g6 play (forge) and noticed that i could not unlock the bootloader through moto's website . i noticed that the model number for the cricket version of the xt1922-9 was the same as the retail version from motorola . which on the website says has the ability to unlock . so i tried to flash the stock retail firmware for the retail and the most update verision being android pie XT1922-9_JETER_RETUS_9.0_PPPS29.118-68-3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and ended up flashing everything succesfully other than the boot.img and all of the system.img files and when i try and reboot the phone to recovery it says failed to pass validation back to fastboot . and the baseband section in fastboot now says not found . can someone help me with how i can flash all the correct files so i can get the phone just to boot up again.

You flashed everything except the boot.img and the system.img files?? That means you mixed up two FWs on one device...
Try flashing this FW for jeter_cricket from mirrors.lolinet.com
https://mirrors.lolinet.com/firmware/moto/jeter/official/Cricket/XT1922-9_JETER_A_CRICKET_9.0_PCPS29.118-63-2_cid1_subsidy-CRICKET_regulatory-DEFAULT_CFC.xml.zip

WoKoschekk said:
You flashed everything except the boot.img and the system.img files?? That means you mixed up two FWs on one device...
Try flashing this FW for jeter_cricket from mirrors.lolinet.com
Click to expand...
Click to collapse
i tried to flash that firmware and still , im only able to succefully flash everything but the system images the bootloader the recovery and the boot image.

jesheesh said:
i tried to flash that firmware and still , im only able to succefully flash everything but the system images the bootloader the recovery and the boot image.
Click to expand...
Click to collapse
What is "not successfully"? Could you explain it more detailed, please? There's always an output message in terminal

jesheesh said:
i tried to flash that firmware and still , im only able to succefully flash everything but the system images the bootloader the recovery and the boot image.
Click to expand...
Click to collapse
You could try LMSA flash rescue option
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my ali using XDA Labs

sd_shadow said:
You could try LMSA flash rescue option
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
i'll download it and try it out

jesheesh said:
i'll download it and try it out
Click to expand...
Click to collapse
I'll also go ahead and copy and paste the output for you here as well.
Sorry it takes me so long to reply . Most of my tinkering time is eaten up with my other phone I have that just so happens to be the only model variant that can't unlock its boot loader hence no root or twrp ... :/
But anyway yeah I'm gonna try the tool and paste those lines of fast boot code for you. One sec.

Deleted everything

Hi
I was messing around with my system and tought I delete everything in TWRP. :crying:
I am still able to go in TWRP and Fastboot.
I messed with the partition formats too.
What can I do then?
Android 10(Lineageos17) wont boot, I always get to the fastboot.
Thanks a lot for your answers.

Konradrundfunk said:
Hi
I was messing around with my system and tought I delete everything in TWRP. :crying:
I am still able to go in TWRP and Fastboot.
I messed with the partition formats too.
What can I do then?
Android 10(Lineageos17) wont boot, I always get to the fastboot.
Thanks a lot for your answers.
Click to expand...
Click to collapse
you can flash stock rom with any fastboot tutorial of you device, but take care because i think it can brick if you flash any wrong rom

zumboy said:
you can flash stock rom with any fastboot tutorial of you device, but take care because i think it can brick if you flash any wrong rom
Click to expand...
Click to collapse
but with fastboot you can only flash images i thought

Konradrundfunk said:
but with fastboot you can only flash images i thought
Click to expand...
Click to collapse
i think you need unzip your rom and run these commands in fastboot console

zumboy said:
i think you need unzip your rom and run these commands in fastboot console
Click to expand...
Click to collapse
this :

zumboy said:
this :
Click to expand...
Click to collapse
from the stock rom?

Konradrundfunk said:
from the stock rom?
Click to expand...
Click to collapse
yes, or you can easly flash stock rom without unzip & console commands. with Xiaomi miflash tool.
search it in google/youtube

zumboy said:
yes, or you can easly flash stock rom without unzip & console commands. with Xiaomi miflash tool.
search it in google/youtube
Click to expand...
Click to collapse
but can u just use TWRP for theese?

zumboy said:
this :
Click to expand...
Click to collapse
I cant't see the first file in the images folder

Thank You
Konradrundfunk said:
I cant't see the first file in the images folder
Click to expand...
Click to collapse
Ok that worked out realy well thanks a lot!!!!:good::good::good:

Question [CLOSED] hi all i need help i brick my nubia red magic 8 pro+

can someone please help me or send me some service to unbrick my nubia?
i can pay

What's happened?

Stusick said:
What's happened?
Click to expand...
Click to collapse
i try to root the phone and now it's in corrupted file and when i press power to continue he show the logo of red magic and thats it

i can enter to fastboot mode but nothing help

How did you root your phone? Rooting the phone is as simple as flashing patched init_boot.img via fastboot flash init_boot. A lot of users here brick their phones because they patched and flashed the boot.img instead of the init_boot.img.

yakir150 said:
i can enter to fastboot mode but nothing help
Click to expand...
Click to collapse
If you can enter fastboot you can still fix..flash your original boot.img from fastboot.
fastboot flash boot boot.img

batuken said:
How did you root your phone? Rooting the phone is as simple as flashing patched init_boot.img via fastboot flash init_boot. A lot of users here brick their phones because they patched and flashed the boot.img instead of the init_boot.img.
Click to expand...
Click to collapse
yeah so did i also flash boot.img instead init_boot.img
but it's ok now
someone help me remotely and fix it

yakir150 said:
yeah so did i also flash boot.img instead init_boot.img
but it's ok now
someone help me remotely and fix it
Click to expand...
Click to collapse
If this is a paid service could you please give me the information so I can fix my phone. Thanks.

[email protected] said:
If this is a paid service could you please give me the information so I can fix my phone. Thanks.
Click to expand...
Click to collapse
Viet nam ah

izsdeaman said:
Viet nam ah
Click to expand...
Click to collapse
I am a Vietnamese and I live in California USA.

yakir150 said:
yeah so did i also flash boot.img instead init_boot.img
but it's ok now
someone help me remotely and fix it
Click to expand...
Click to collapse
So flashing stock boot.img with fastboot wouldn't fix?

JWnSC said:
So flashing stock boot.img with fastboot wouldn't fix?
Click to expand...
Click to collapse
i didnt try it i just talk to some service and pay ^_^

yakir150 said:
i didnt try it i just talk to some service and pay ^_^
Click to expand...
Click to collapse
Could you please give me the information to contact this service. Thanks.

Mod Edit: Quoted Post Removed
I buy and he fix

Price please and tag room share some more info please

Mod Edit: Quoted Post Removed
Have you seen which programs were used?

aaa.bbb111222 said:
Have you seen which programs were used?
Click to expand...
Click to collapse
He used miflash, QFIL (with various different parameters than normal use), QFL, and fastboot. Finally he recreated two super partitions for my phone and flash odm, system, and vendor images into the supper partitions. After 4 hr of trying, my phone boots however I still have the red warning "Your phone is corrupt".

[email protected] said:
He used miflash, QFIL (with various different parameters than normal use), QFL, and fastboot. Finally he recreated two super partitions for my phone and flash odm, system, and vendor images into the supper partitions. After 4 hr of trying, my phone boots however I still have the red warning "Your phone is corrupt".
Click to expand...
Click to collapse
lock bootloader and flash full rom

izsdeaman said:
lock bootloader and flash full rom
Click to expand...
Click to collapse
how do you flash a full rom?

yakir150 said:
how do you flash a full rom?
Click to expand...
Click to collapse
Put the rom in the root directory or on external SD card through the C connector. Use local update and choose the rom.