Develop Bugs

How can I unroot, relock bootloader and go to stock?

Hey everyone is this possible to do if so how?

xcha0tic said:
Hey everyone is this possible to do if so how?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pi...ol-tool-one-driversunlocktwrpfactory-t3730226
Haven't used this tool but I would look at this as a possible solution for locking bootloader.

xcha0tic said:
Hey everyone is this possible to do if so how?
Click to expand...
Click to collapse
If you are planning to return or sell the device.
1. Do a factory reset.
2. Make sure OEM unlocking and USB debugging are set to ON in the developer options.
3. Reboot into bootloader mode.
4. Run "fastboot flashing lock"
5. Then run "fastboot flashing lock_critical
The last two commands will wipe your phone again. Your bootloader should then be locked.
If your not planning on returning or selling your device. Then just leave it unlocked. That is all ?

Badger50 said:
If you are planning to return or sell the device.
1. Do a factory reset.
2. Make sure OEM unlocking and USB debugging are set to ON in the developer options.
3. Reboot into bootloader mode.
4. Run "fastboot flashing lock"
5. Then run "fastboot flashing lock_critical
The last two commands will wipe your phone again. Your bootloader should then be locked.
If your not planning on returning or selling your device. Then just leave it unlocked. That is all
Click to expand...
Click to collapse
I flashed elemntal kernel would flashing back to stock or the reset take it back to stock kernel?

xcha0tic said:
I flashed elemntal kernel would flashing back to stock or the reset take it back to stock kernel?
Click to expand...
Click to collapse
Flashing back to stock will install the stock kernel :good:

Badger50 said:
If you are planning to return or sell the device.
1. Do a factory reset.
2. Make sure OEM unlocking and USB debugging are set to ON in the developer options.
3. Reboot into bootloader mode.
4. Run "fastboot flashing lock"
5. Then run "fastboot flashing lock_critical
The last two commands will wipe your phone again. Your bootloader should then be locked.
If your not planning on returning or selling your device. Then just leave it unlocked. That is all
Click to expand...
Click to collapse
Hey Badger50, When I did this, I was able to perform the fastboot flashing lock and then rebooted into the bootloader (after phone loaded up again) and attempted to do "fastboot flashing lock_critical" but nothing happens, it just says "waiting for any device'" Should I be concerned? Thanks for your help!

kryptonite_2448 said:
Hey Badger50, When I did this, I was able to perform the fastboot flashing lock and then rebooted into the bootloader (after phone loaded up again) and attempted to do "fastboot flashing lock_critical" but nothing happens, it just says "waiting for any device'" Should I be concerned? Thanks for your help!
Click to expand...
Click to collapse
Nothing to be worried about. I've seen a few folks have that issue. Just outa curiosity, what do you get when you run....fastboot oem device-info.......?

Badger50 said:
Nothing to be worried about. I've seen a few folks have that issue. Just outa curiosity, what do you get when you run....fastboot oem device-info.......?
Click to expand...
Click to collapse
Well it did say:
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: true
So I tried it again and it seems to have gone through the motions of locking it again. Now it says:
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
Honestly have no idea what I did to make it work haha. I factory reset just because and was signing in to Google whenever I got the notification that you responded. Either way, I'm all locked up now. Thanks!!!

kryptonite_2448 said:
Well it did say:
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: true
So I tried it again and it seems to have gone through the motions of locking it again. Now it says:
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
Honestly have no idea what I did to make it work haha. I factory reset just because and was signing in to Google whenever I got the notification that you responded. Either way, I'm all locked up now. Thanks!!!
Click to expand...
Click to collapse
There ya go bruh! :good::good:

I want left a custom rom on my phone and unroot it, is this possible? I need to put apps on which check for root access

prv8droid said:
I want left a custom rom on my phone and unroot it, is this possible? I need to put apps on which check for root access
Click to expand...
Click to collapse
Sure. Just dirty flash the rom again, but don't flash root :good:

Badger50 said:
If you are planning to return or sell the device.
1. Do a factory reset.
2. Make sure OEM unlocking and USB debugging are set to ON in the developer options.
3. Reboot into bootloader mode.
4. Run "fastboot flashing lock"
5. Then run "fastboot flashing lock_critical
The last two commands will wipe your phone again. Your bootloader should then be locked.
If your not planning on returning or selling your device. Then just leave it unlocked. That is all
Click to expand...
Click to collapse
Is this still correct procedure after 18 months? I guess no more critical unlock. Anything else different?

srqrob said:
Is this still correct procedure after 18 months? I guess no more critical unlock. Anything else different?
Click to expand...
Click to collapse
Nothing has changed except the critical unlock part :good:

Thanks for the help. Gosh, middle of the night post. I follow enough to know you're pulling back a bit. Hope all is good with you.

srqrob said:
Thanks for the help. Gosh, middle of the night post. I follow enough to know you're pulling back a bit. Hope all is good with you.
Click to expand...
Click to collapse
All is well my friend, but thanks for asking. Real life with the family has changed things a bit, in a good way that is! Not to mention that I'm just waiting for the P4XL, and many to most of the things about the P2XL have been answered many times over. But no worries, I'm still lurking around from time to time

Badger50 said:
If you are planning to return or sell the device.
1. Do a factory reset.
2. Make sure OEM unlocking and USB debugging are set to ON in the developer options.
3. Reboot into bootloader mode.
4. Run "fastboot flashing lock"
5. Then run "fastboot flashing lock_critical
The last two commands will wipe your phone again. Your bootloader should then be locked.
If your not planning on returning or selling your device. Then just leave it unlocked. That is all
Click to expand...
Click to collapse
Will this command unroot the phone as well? Thanks

billgufran said:
Will this command unroot the phone as well? Thanks
Click to expand...
Click to collapse
Most definitely :good:

Pixel XL Android P DP4 soft brick

Hi,
Like the title says, my Pixel XL is bootlooping.
The only thing that works is getting to bootloader, I can't even get to recovery without it booting again. The biggest problem is that it's OEM locked and obviously I can't unlock it via developer options.
Is there any way to unlock it without booting to the OS?

Don't Ask said:
Hi,
Like the title says, my Pixel XL is bootlooping.
The only thing that works is getting to bootloader, I can't even get to recovery without it booting again. The biggest problem is that it's OEM locked and obviously I can't unlock it via developer options.
Is there any way to unlock it without booting to the OS?
Click to expand...
Click to collapse
OEM unlock must be toggled before unlocking bootloader or CMD won't work, Can't you flash stock OTA in the recovery? https://developers.google.com/android/ota You can sideload the zip and should flash it to save your device once you get into the OS unlock your bootloader and avoid a situation like this again

liam_davenport said:
OEM unlock must be toggled before unlocking bootloader or CMD won't work, Can't you flash stock OTA in the recovery? https://developers.google.com/android/ota You can sideload the zip and should flash it to save your device once you get into the OS unlock your bootloader and avoid a situation like this again
Click to expand...
Click to collapse
Thanks, but like I said - I can't get into recovery mode and the phone is OEM locked.

Don't Ask said:
Thanks, but like I said - I can't get into recovery mode and the phone is OEM locked.
Click to expand...
Click to collapse
Sorry missread... My bad Contact Google sounds like an RMA job for this one

Hey, if you can get into the bootloader, there's a high chance you can use fastboot. Using a computer to install adb/fastboot and then using the command line to run
`fastboot reboot recovery` (without the ticks)
Worth a shot, but if you can't get into recovery, I'm afraid the recovery might be failing as well.

khoanguyen96 said:
Hey, if you can get into the bootloader, there's a high chance you can use fastboot. Using a computer to install adb/fastboot and then using the command line to run
`fastboot reboot recovery` (without the ticks)
Worth a shot, but if you can't get into recovery, I'm afraid the recovery might be failing as well.
Click to expand...
Click to collapse
I've tried that as well with no success, it simply starts boot looping again.
I read somewhere about EDL mode, does something that like actually work for the Pixel?

Don't Ask said:
I've tried that as well with no success, it simply starts boot looping again.
I read somewhere about EDL mode, does something that like actually work for the Pixel?
Click to expand...
Click to collapse
Hey, yeah I looked into EDL mode. No luck unfortunately, looks like it requires special files manufacturers only have access to. Is there any way you can do a RMA?

How to Lock Bootloader

Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.

Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I do have a computer, a Windows 10 Pro

Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.

sliding_billy said:
Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.
Click to expand...
Click to collapse
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.

eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.

eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.

coolhandz said:
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.
Click to expand...
Click to collapse
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".

sliding_billy said:
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.
Click to expand...
Click to collapse
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.

Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.

sliding_billy said:
Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.
Click to expand...
Click to collapse
Yeah, so I locked using "fastboot flashing lock" but then it doesn't start, saying that there is no operating system or something like that. I freaked out and was able to unlock again using "fastboot flashing unlock". Now all is wiped. I guess I need to flash the oem rom first, then lock. I'll have to do this all later tonight. Just glad that I didn't brick it yet.

eec007 said:
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.
Click to expand...
Click to collapse
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.

bobby janow said:
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.
Click to expand...
Click to collapse
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.

eec007 said:
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.
Click to expand...
Click to collapse
One thing I would do before I relocked the bl would be to do the full login procedure, email everything other than apps. Then make sure you're on the Nov update in about phone, I'm sure you will be, and then fastboot relock the bl with the proper command. It will wipe the device again but it's a small price to pay for about 10 minutes of work. Then once it reboots and there is no more error message you'll be fully stock. Enable dev options again and make sure the oem switch is active allowing bl unlock. Then you're done. I've gotten to the point on my 5X where I even flip the oem switch so it can't be bl unlocked until I go in and flip it back. Dangerous if you're flashing stuff but not so much if you're just taking OTAs. That's of course your call entirely. Good luck.

eec007 said:
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".
Click to expand...
Click to collapse
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.

eec007 said:
Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.
Click to expand...
Click to collapse
They're right to mention that relocking a modified device can result in a brick.
Your best bet is to go to https://developers.google.com/android/images#taimen
Follow the directions to the "T", then relock it if you are really really sure that the unlock screen bothers you.
Would suggest to do this anyway, no matter future unlock status.

TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
I agree with most of your post other than waiting for the next OTA before you lock the bootloader. Why would he need to do that? If he's stock, and he'll see that immediately, then relock it. He doesn't want root or Magisk but only wants banking and Pay. With the slider allowing bl unlock he's in no danger whatsoever. Lock and relock whenever he wants. OTA will not disallow the slider once it's set.

TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
Thank you for explaining this. I had thought that the Developer Option slider was to unlock the bootloader, but your explanation clarifies it, the slider is to allow the bootloader to be unlocked...

Ok, so I tried to flash the factory image using adb flash-all and it keeps getting the error:
Sending sparse 'vendor_a' 2/2 (193888 KB) FAILED (Error reading sparse file)
Now the phone is not working at all and says that "device is corrupt" and will not boot past the white google screen. I can try again using adb, but it is the same error each time. I tried to download the image again and same sparse error. I can also fastboot in TWRP, but not sure what to do in there. What am I doing wrong? I guess I should've rooted and used Magisk like others have said.

turns out changing to a different cable resolved my sparse error and I was then successfully able to apply the factory image and lock the device. Thanks everyone for the help.

OEM Locked, and Device is corrupt. Unfixable?

So, long story short I recently decided to try and root my oneplus7t I unfortunately made some mistakes and somehow corrupted some files. I read elsewhere in the forum that I could download the stock rom which I did and then use flash-all and that would allow me to go back to the factory settings so I could lock the oem and just go back to normal because I was tired of the headache. Unfortunately, after using flash-all I locked the oem thinking everything should be stock and it would work properly. But it says device is corrupt and trying to unlock the oem says oem unlocking is disabled.
So did I just completely brick my phone? I don't know of anyway to fix it at this point :/.

kschmitz4 said:
So, long story short I recently decided to try and root my oneplus7t I unfortunately made some mistakes and somehow corrupted some files. I read elsewhere in the forum that I could download the stock rom which I did and then use flash-all and that would allow me to go back to the factory settings so I could lock the oem and just go back to normal because I was tired of the headache. Unfortunately, after using flash-all I locked the oem thinking everything should be stock and it would work properly. But it says device is corrupt and trying to unlock the oem says oem unlocking is disabled.
So did I just completely brick my phone? I don't know of anyway to fix it at this point :/.
Click to expand...
Click to collapse
Can you still boot into bootloader via the hardware keys, whatever that combo is on the 7t?
Boot to bootloader or recovery and factory reset it or so.

Josh McGrath said:
Can you still boot into bootloader via the hardware keys, whatever that combo is on the 7t?
Boot to bootloader or recovery and factory reset it or so.
Click to expand...
Click to collapse
I can get to the bootloader but it's Device State -locked and when I tell it to boot into recovery it says the device is corrupt. When I use fastboot to oem unlock it says I cannot, and I can't flash when oem is locked either.

kschmitz4 said:
I can get to the bootloader but it's Device State -locked and when I tell it to boot into recovery it says the device is corrupt. When I use fastboot to oem unlock it says I cannot, and I can't flash when oem is locked either.
Click to expand...
Click to collapse
Try
fastboot erase userdata and
Fastboot erase cache
Let me know if that works or not we will move on. Probably won't work since it's bootloader locked
You may have to contact OP and while you're at it, get the MSM tool for us all :good:

It says erase is not allowed in locked state . I think this is probably all she wrote for this one. I think I'm just going to send it back tbh, the whole reason I was trying to root it was because it didn't work with Sprint like they said it would. and I was wondering if I could find a way too make it work with custom software. Thanks for trying

Are you able to flash one of these Fastboot ROMs?

Maybe Sideload can work!
https://support.oneplus.com/app/answers/detail/a_id/4583/kw/7t here is official stock file.
https://forums.oneplus.com/threads/how-to-do-flash-through-adb-sideload.509377/
https://www.the***********.com/sideload-ota-update-stock-recovery-adb/
Please refer above links for your knowledge purpose maybe it can help.....

I unfortunately no longer have Twrp installed as I did a flash-all with a stock rom already . If I try and flash recovery it says "flashing is not alllowed in lock state". Sideloading wasn't functional back when I had twrp either as the functionality for it is still in progress. I'll probably try contacting support one more time and see if I can get a T2 who can unbrick it, otherwise I'm just going to send it back. Thanks for the attempts guys!
Edit: As to the flashboot roms I flash-all'ed one of them and that's how I got into this mess :/.

kschmitz4 said:
I unfortunately no longer have Twrp installed as I did a flash-all with a stock rom already . If I try and flash recovery it says "flashing is not alllowed in lock state". Sideloading wasn't functional back when I had twrp either as the functionality for it is still in progress. I'll probably try contacting support one more time and see if I can get a T2 who can unbrick it, otherwise I'm just going to send it back. Thanks for the attempts guys!
Edit: As to the flashboot roms I flash-all'ed one of them and that's how I got into this mess :/.
Click to expand...
Click to collapse
I ended up needing to flash the fastboot 10.0.3 firmware and was able to do a local upgrade to 10.0.4 that way, then flashing a patched boot.img via fastboot

I can't run any flash commands as my oem is locked. I don't suppose there's anyway around that?

kschmitz4 said:
I can't run any flash commands as my oem is locked. I don't suppose there's anyway around that?
Click to expand...
Click to collapse
How did you flash twrp with it oem locked??That doesnt make sense

I had twrp on it when the oem was unlocked, I was trying to reset the device to stock, so I did a flash-all and then oem locked it. But for some reason the repair was unsuccessful, and now it says my device is corrupted and I forgot to turn on oem unlocking in the settings on my phone after the flash-all before I did the oem-lock.

kschmitz4 said:
I had twrp on it when the oem was unlocked, I was trying to reset the device to stock, so I did a flash-all and then oem locked it. But for some reason the repair was unsuccessful, and now it says my device is corrupted and I forgot to turn on oem unlocking in the settings on my phone after the flash-all before I did the oem-lock.
Click to expand...
Click to collapse
You should have no issues reflashing the stock images

I cannot flash anything. Because my OEM state is locked.

Boot to Stock Recovery ?
Holding for a long time Volume Down + Power Buttons while booting your phone ?

Volume down plus power button takes me to "Your device is corrupt and will not boot"

kschmitz4 said:
Volume down plus power button takes me to "Your device is corrupt and will not boot"
Click to expand...
Click to collapse
Looks like you will need the MSM tool to fix this issue. You'll have to contact OP support and they will remote in your PC, load their software and flash it 100pct back to stock.
Also, disconnect them before they can delete the MSM tool so we can have it here in the community

kschmitz4 said:
Volume down plus power button takes me to "Your device is corrupt and will not boot"
Click to expand...
Click to collapse
Press volume up/down and power, reboot to fastboot. Unlock bootloader again. Install update from settings, reboot and install it again. (local install)
Factory reset in setting, reboot fastboot, lock bootloader. Reboot and untick unlock bootloader in developer settings.

Don't know if it's too late but I believe there's a working MSM tool now

Question Boot Loop after Relocking Bootloader

Hello XDA-Developer-Forum!
I think I have messed up my new phone XQ-BT52.
I followed the instructions on this thread https://forum.xda-developers.com/t/how-to-root-and-pass-safetynet-on-xq-bt52-62-0-a-3-163.4408851/ and all worked fine.
But then I wanted to have R/W on System and started there. https://forum.xda-developers.com/t/...-superrw-featuring-makerw-read-write.4247311/
I wanted to flash the image with fastboot, but had problems with the drivers.
Somehow I had the bad idea to issue fastboot oem lock
Now my device is locked again. I managed to get into recovery and made a wipe data / factory reset.
I cannot flash with fastboot, because the device seems to be locked.
The same happens with adb sideload.
Can I unlock the bootloader again?
Or can I flash the version of stock android 12 with adb sideload (I read that this would work with locked bootloader too)?
But adb sideload works only with zip-files. How to create a signed zip from XQ-BT52_Customized EEA_62.1.A.0.533?
Any help is really appreciate!
Thankx in advance!

It sounds like maybe your system partitions got messed up? Go into flashboot mode and try using newflasher with just the super.sin file from the downloaded firmware.
Make sure you use a super.sin from the same firmware you had on the phone when this happened.
Flashing official images should work even if the device is locked, because they're signed by Sony.

Thank you for your reply wirespot!
I guess flashing would not be not be possible, because the phone is locked.
However, I managed to repair the phone with Xperia Companion.
Selected "Device not detected" and connected with volume up or down pressed (cannot remember).
And it worked!
I removed unneeded apps with adb shell and pm uninstall -k --user 0 NameOfPackage.
Glad to have my new phone back.
Thankx again.

Please, did you find an answer to your question about unlocking again?
I am going through some issues with my 10III too and I want to try locking the bootloader, and going the Companion way as you did. But, once everything is repaired, I will need an unlocked bootloader again.

marbalf said:
Please, did you find an answer to your question about unlocking again?
I am going through some issues with my 10III too and I want to try locking the bootloader, and going the Companion way as you did. But, once everything is repaired, I will need an unlocked bootloader again.
Click to expand...
Click to collapse
Yes you can unlock BL after

King081 said:
Yes you can unlock BL after
Click to expand...
Click to collapse
Thank you!