help me please - Samsung Galaxy A3, A5, A7 (2017) Questions & Answe

please help me..
a few days ago I installed on my galaxy a3 2017 a custom rom but now I want to reinstall the official samsung software and so I took my computer and I tried to install it with odin. The memory was full and installing the software all's gone wrong and now when I try to go to recovery mode o something else like the download mode my phone shows me "an error has occurred while updating the device..." I've tried to use the emergency recovery in the smart switch on my pc but, even if I install again the drivers the computer doesn't recognize my phone. I'm going in panic please help me soon.. I need it

hi
i have your issue but when phone turned off i can go to download mode and install new firmware and its ok
smart switch emergency recovery cant do anythings and dont use it!!!!
try adb if you can

Ale2001_03 said:
please help me..
a few days ago I installed on my galaxy a3 2017 a custom rom but now I want to reinstall the official samsung software and so I took my computer and I tried to install it with odin. The memory was full and installing the software all's gone wrong and now when I try to go to recovery mode o something else like the download mode my phone shows me "an error has occurred while updating the device..." I've tried to use the emergency recovery in the smart switch on my pc but, even if I install again the drivers the computer doesn't recognize my phone. I'm going in panic please help me soon.. I need it
Click to expand...
Click to collapse
Where is that custom rom?

Related

[Q] Stuck with error message " Firmware upgrade encountered an issue"

I tried to update my Samsung Galaxy Note II to 4.1.2 but I encountered an error on odin and now its stuck with the a message of " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
However Kies is not recognizing the phone when i plug it to the usb cable. but when i try odin it says its added. I cant get it to download mode.:crying:
How do I get this fixed?
I need your help badly...
what exactly you getting while rebooting to download mode?
If you getting msg to use recovery mode while rebooting to download mode, then this is also download mode, flash using odin
The same thing happened for me. It won't update no matter what you do. I tried reinstall kies and drivers but no luck.
And the strange part is if you like I did wait a couple of days the update won't be available anymore. It will start saying that you already have the latest firmware. I read somewhere that it was maybe caused because samsung found a bug in the firmware and then they quickly rool it back
Sent from my GT-N7100 using Tapatalk 2
Any help on the above post would be greatly appreciated.
I believe my issue is that I tried rooting it but had the "new" firmware on the device so the root process didn't work. Now, from what I can tell, the boot.img is fubar'd.
I can't charge the phone when it's off. Goes straight to the firmware upgrade failed screen. I try to ODIN factory image and it fails on write of boot.img.
Had the device a whole 2 hrs before it became a paper weight.:crying:
Can you go into download mode?
Sent from my GT-N7100 using xda app-developers app
gamblt21 said:
I tried to update my Samsung Galaxy Note II to 4.1.2 but I encountered an error on odin and now its stuck with the a message of " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
However Kies is not recognizing the phone when i plug it to the usb cable. but when i try odin it says its added. I cant get it to download mode.:crying:
How do I get this fixed?
I need your help badly...
Click to expand...
Click to collapse
Happened to me once as well,i accidently lost the USB connection from the PC and all i did was go into the KIES thing and then click on emergency firmware recovery.It worked well for me but in your case you might consider going into download mode(vol down + home + power button) and then flashing a new stock firmware from samfirmware via ODIN

[Q] Problem in Note 2 Boot + Firmware installation

Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
suppose trongwi
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
note2nooby said:
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
Click to expand...
Click to collapse
Please it is a request , I need a precise method to overcome this problem ... some files in your suggested link doesnot work especially Hotfile.com
Thank you for reading
where can I download "Recovery Package/ROM"? Hotfile.com is not available anymore
Thank you
removed
simple google search gave me this , try to download!
Edit : i took the link off , because it could harm your phone if you are coming from 4.3 android
Ajmal khan
I faced the same problem few days back...
Start kies on ur laptop ( dont connect ur phone yet )
Choose initialisation option
Enter model number
Enter serial number
Now connect ur phone with pc in download mode
Pls make sure u have high speed net for 2-3 hrs...
Bcuz kies download the full rom as per ur serial number
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
note2nooby said:
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
Click to expand...
Click to collapse
No No and Honestly I didnt try that ... I just wanted to freshen my mobile by reinstalling official Firmware 4.1.2 .... oh anyways good news is that I recovered my mobile by following the bellow steps ..
1. Downloaded Official Firmware "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar"
2. Opened Odin
3. and upload the "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar" in PHONE section under PDA (Not PDA) & pressed Start
4. The installation went well but with problems in upgrading applications and continual restarting.
5. again opened Odin and this time I uploaded the official Firmware in PDA and installation went well
6. Booting and registeration also went well.
7. Mobile is back on life
But But
Now my colleague has messed with Note 3 and it also gives the same msg as i had in the beginning "firmware upgrade encountered an issue".
Thank you max621 for your kind help, I will try those for Note3 instead.
Thanks for reading.
ajmalkhan360 said:
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
Click to expand...
Click to collapse
Try to Remove the battery and try to access the RECOVERY
the FIRMWARE was damaged.
I wish that you have nandroid backups there.
I already experienced that and just rebooted to recovery and restoring by nandroid.
Glad to see your phone is back up and running ...
next time you want refresh your phone , just do simple factory reset!
Glad to hear that u recovrr ur phone.. but for note3 u must install kies3 first....

[Q] Think I've bricked it.

Hi, I installed Cyanogen without a problem however the USB connection did not work as well as some other things so I found the Note 2 stock ROM and went to try flash that.
However the USB connection not working seems to still be a problem as the ROM doesn't flash (failed) and isn't recognized by Kies if I try to do an emergency firmware recovery.
Help guys! I'm stuck at the either "downloading" screen when I turn my phone on to load the ROM or either "there was a firmware error", I cannot load my phone past that, arrrrgh!
looks like it is a driver issue . You can try installing the drivers manually or with a different pc which previously recognized Note 2 ..
Go to downloading mode and let the usb drivers install from online or windows update .. or try connecting a different Note 2 and check if your PC recognizes Note 2

[HELP]Unfinished Firmware Flash Via Odin

hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL

m919 help

hi.i need some help maybe someone can help me out.. i got a m919 s4 and i was having problems with the wifi running 4.4.2. phone was rooted. so i try installing stock rom on phone to remove the root access and maybe that would fix the wifi issue.. so i try loading the same firmware using odin 3.09 but it gave me error on write..i disconnected phone and turn it on but the phone gave me a screen telling me to connect the phone to kies for emergency recovery. i try doing that but kies doesnt see the phone..and everytime i try write thru odin i get failed to write.. any ideas....
ps i can only get into download mode and the screen telling me to connect to kies for recovery nothing else
os 4.4.2
nevermind guy finally found the problem.. i needed to use a older odin for it to work thanx anyway

Categories

Resources