[P900][Touchwiz] Yet Another Marshmallow Rom 20180202 - Galaxy Note Pro 12.2 Android Development

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Features:
-touchwiz ui with near stock functionality
-based on Tab A and Tab S frameworks
-Tab S2 apps
-Tab S3 UI Sounds
-SPen features
-theme support
-pre-rooted (magisk)
-deodexed
-debloated
-knox removed
-Display scaling (root required)
-all apps support multiwindow
-some minor changes like removing safe volume warning, overlay fix etc
-ported IronKernel from @Tkkg1994 (read more about kernel features here: https://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-ironstock-kernel-v3-2-t3531295 )
Notes:
full wipe required!
First boot takes 10 minutes
For some features root required
Device encryption doesn't support here
If you don't want to install root, remove magisk folder from install zip
If you want to make custom rom based on my rom, you're welcome.
Download:
02feb
gdrive: https://drive.google.com/open?id=1sAiyxBEkEDEWtOiuMvOM53DKWmAVWHQx
Thanks to @Tkkg1994 for the kernel
Kernel sources:
https://github.com/bonuzzz/IronKernel

I really liked your other Marshmallow rom, but couldn't use it because I couldn't set a password or pin. Do either of those security measures work with this rom?
Thank you for all of your hard work. It really is appreciated!

dugwhitney said:
I really liked your other Marshmallow rom, but couldn't use it because I couldn't set a password or pin. Do either of those security measures work with this rom?
Thank you for all of your hard work. It really is appreciated!
Click to expand...
Click to collapse
I could not fix it quickly... try to use 3rd party lock screens for example.
I dont remember if it works on tab s2 port. I dont use lock screen

I've been (as you know) using your other tab / marshmallow port quite happily. What's the difference between it and this rom? Downloading anway... heck, I just realized the camera probably works in this version (not like I need it to, frankly).
Thanks again for the other one, and for continuing to pursue keeping this tablet in the thick of things. I have a pc laptop, a mac laptop, and this... and use this more than the others combined.

It's hard to compare because these two roms has one goal - make clean and stable daily firmware, but there two ways to achieve it.
It has working camera here. Some bugs with hwcomposer are solved here. I couldn't solve them in tab s2 port.
This rom should be more battery friendly
it has blue light filter but without any settings. Simple, but working.
It's not significally faster than tab s2 rom.
This rom has more possibilities for me to edit features and fix bugs. Maybe in future someone make more custom rom on this base.
And, of course, new bugs added

bonuzzz said:
It's hard to compare because these two roms has one goal - make clean and stable daily firmware, but there two ways to achieve it.
It has working camera here. Some bugs with hwcomposer are solved here. I couldn't solve them in tab s2 port.
This rom should be more battery friendly
it has blue light filter but without any settings. Simple, but working.
It's not significally faster than tab s2 rom.
This rom has more possibilities for me to edit features and fix bugs. Maybe in future someone make more custom rom on this base.
And, of course, new bugs added
Click to expand...
Click to collapse
Well, I'm now running it. The camera appears quite nice, with settings that work well (though one did tell me it wasn't enabled or something). Just a quick fly-through on the camera so far... My next thing is to install that soundcamp app again.

One odd thing... this may have nothing to do with your port and everything to do with the original rom. But though the Samsung Galaxy app allows everying else to work just like it would on a factory tablet, the Hancom Office install is missing... all of it, anyway, except two files which are useless without the main office apps (Word, Spreadsheet, and so forth). Not a big deal, as I use Officesuite Pro anyway... but liked having a second editor option with Hancom Word. Ah, and found a copy later tonight of Hancom I'd backed up... it installed w/o incident so I'm all good.
That's all I know.

The s-pen pop-up wheel is nice on this rom. It has a feature I don't recall on the old Lollipop touchwiz called "Screen Write" -- it takes a snap of whatever's on the screen, then allows scribbling all over it with the s-pen. You can then crop or save the pic if desired. Here's a quick example (see attached photo):

Will be watching this thread for future development. Happy with your other S2 port for now though

T900
As I thought, this rom can be flashed into T900 just like other P900 roms since they share hardware. (Rotation and Vibration doesn't work just like other p900 rom due to driver differance)
Is there any way to root this rom? Im trying to use it as daily driver. I also love the speed of this rom. Thanks!!

Quantra said:
As I thought, this rom can be flashed into T900 just like other P900 roms since they share hardware. (Rotation and Vibration doesn't work just like other p900 rom due to driver differance)
Is there any way to root this rom? Im trying to use it as daily driver. I also love the speed of this rom. Thanks!!
Click to expand...
Click to collapse
I use magisk for root

what Google security update is this firmware built on?
I have issues with some of the newer ones, new limitations / prohibitions

Sterist said:
what Google security update is this firmware built on?
I have issues with some of the newer ones, new limitations / prohibitions
Click to expand...
Click to collapse
December, 2016

bonuzzz said:
December, 2016
Click to expand...
Click to collapse
great news to me!
any chance in future updates of backporting the note pro's multi window framework?
1. the old sidescreen tray with configurations and pairing is far superior to the "new" method of using half the screen to only select from a list (easier, faster, and most importantly doesn't require subjecting foreground app to being cached/minimized)
2. the "new" method resizing of pop up windows only works diagonally -- where as note pro framework can resize up/down, left/right, and diagonal.
Samsung is really going backwards these days ;(

Sterist said:
great news to me!
any chance in future updates of backporting the note pro's multi window framework?
1. the old sidescreen tray with configurations and pairing is far superior to the "new" method of using half the screen to only select from a list (easier, faster, and most importantly doesn't require subjecting foreground app to being cached/minimized)
2. the "new" method resizing of pop up windows only works diagonally -- where as note pro framework can resize up/down, left/right, and diagonal.
Samsung is really going backwards these days ;(
Click to expand...
Click to collapse
I think it's not possible

Does the USB debugging work properly?
Thank you for all of your hard work..!
Does the USB debugging work properly? ..
Also, Does the screen mirroring work properly?
tap s2 port rom hasn't worked.. so i wonder..

TaeJaLee said:
Thank you for all of your hard work..!
Does the USB debugging work properly? ..
Also, Does the screen mirroring work properly?
tap s2 port rom hasn't worked.. so i wonder..
Click to expand...
Click to collapse
usb debugging and screen mirroring are working on both roms

bonuzzz said:
usb debugging and screen mirroring are working on both roms
Click to expand...
Click to collapse
you mean this rom? (20170404 ver.)
https://forum.xda-developers.com/galaxy-note-pro-12/development/p900-touchwiz-marshmallow-t3567916
In the tap s2 port rom (20170404 ver), USB debugging hasn't work properly on my tablet..

TaeJaLee said:
you mean this rom? (20170404 ver.)
https://forum.xda-developers.com/galaxy-note-pro-12/development/p900-touchwiz-marshmallow-t3567916
In the tap s2 port rom (20170404 ver), USB debugging hasn't work properly on my tablet..
Click to expand...
Click to collapse
yes. i use debugging every time

bonuzzz said:
yes. i use debugging every time
Click to expand...
Click to collapse
i installed this rom just now.. but..
in this rom, usb debugging dosen't work either..
in adb tools, if i input "adb devices", it output "unauthorized".. :crying:
(i already set Developer options - USB debugging enabled.. but doesn't work)

Related

Android 4.4.2 Omnirom

I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet? How stable is it?
I found the link here: http://true-android.blogspot.ca/2014/03/update-samsung-captivate-glide-sgh-i927.html
I also dont know, for any rom that has separate gapps, when would you flash those? After or before the new rom? at the same time? Like, if after a ROM flash it automatically reboots, it will boot up with no gapps and likely not run - correct?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Pawprints1986 said:
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet? How stable is it?
I found the link here: http://true-android.blogspot.ca/2014/03/update-samsung-captivate-glide-sgh-i927.html
I also dont know, for any rom that has separate gapps, when would you flash those? After or before the new rom? at the same time? Like, if after a ROM flash it automatically reboots, it will boot up with no gapps and likely not run - correct?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Click to expand...
Click to collapse
you can find more information here: http://forum.xda-developers.com/showthread.php?t=2541182
Gapps is included. You must install rom zip first, because it formats system partition.
Official gapps doesnt compatible with our phone, I think its better not installing.
hmm..
Pawprints1986 said:
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Click to expand...
Click to collapse
I am using omni ROM . . somehow I find it less buggy than cm 11
Nevertheless I would wanna give my thanks and even though I am pointing out bugs . . I really do appreciate his work .. A lot
Omnirom is very very stable has all if not most of the theming features except for trebuchet launcher
//It is a bit more battery consuming but I like it cause I am able to run my processor at 1.4ghz which is sweeeet!!!
//It has issues with OK Google functionality the audio is lagged and irritating
//The Google experience launcher is not built for it
//It has issues with Google maps 7 but there is a fix to have 6th version to back you up when needed
//it has issues with Skype and the fix is work in progress I guess..
//GPs is a bit slow but works
//WiFi direct crashes for me
Once in a blue moon the phone might rebot itself cause of a crash..
Though considering WiFi tethering , 3g switching, link2sd ,memory swapping
Ksm everything is working really try it . . its an amazing experience from an amazing phone
Can someone tell me the difference between wifi direct, wifi sharing, and wifi sharing manager??
Wifi itself is working in 4.4.2 right?
Also, were your keyboard backlights working automatically or did you ened qwerty led?
is qwerty led something that needs to be running all the time. or "ongoing" in the top drawer?
Wi-fi direct is a type of communication between two devices, similar to Bluetooth, so you can send files. I never used this, even when transfering big files from one phone to another, it's better to use an USB OTG cable - the connection speed is lightning fast!
Don't know what you mean about wi-fi sharing. Maybe wi-fi tethering (hotspot) - it's when you share your phone 2G/3G internet connection via wi-fi. This thing is working fine. Wi-fi itself is working, of course.
As for keyboard light: when tested OmniROM, I used liblight solution, but the qwertyled using is simple too: just launch it and you're done. While the service is running, keyboard light will work.
Now I'm on CM 11, and I have 11 days of uptime already, I recommend this ROM (but that's just my taste). In CM 11 keyboard backlights are working from the box, no need for qwertyled.
Also, I looked at the link you posted, to the true-android blog. Please, don't use the guide one can found there, it's awful. You can't install 4.4.2 ROM with recommended 2.6.3.0 TWRP, the correct one is 2.6.3.1 from bubor here, and you don't need any gapps beside included in the ROM.
Better use this guide from stormdude124: [UPDATED][2014][How-to]Everything you need to know and do to your Captivate Glide, it's updated, it's verified and there's no ads!
Makshow said:
Now I'm on CM 11, and I have 11 days of uptime already, I recommend this ROM (but that's just my taste). In CM 11 keyboard backlights are working from the box, no need for qwertyled.
Also, I looked at the link you posted, to the true-android blog. Please, don't use the guide one can found there, it's awful. You can't install 4.4.2 ROM with recommended 2.6.3.0 TWRP, the correct one is 2.6.3.1 from bubor here, and you don't need any gapps beside included in the ROM.
Better use this guide from stormdude124: [UPDATED][2014][How-to]Everything you need to know and do to your Captivate Glide, it's updated, it's verified and there's no ads!
Click to expand...
Click to collapse
Can you use a cyanogen mod rom with clockworkmod recovery installed? i remember trying cyanogenmod with my phone and couldnt get it to work.
Just flash TWRP 2.6.3.1 from link above, it's superior to clockworkmod recovery (CWM) in all ways: touch interface, working backups with compression, charging support and it allows to install KitKat roms. With CWM you can install ROMs up to android 4.3, so, you still can install CM 10.1.3 or CM 10.2 with CWM, but not CM 11.
about wifi direct and sharing...
Pawprints1986 said:
Can someone tell me the difference between wifi direct, wifi sharing, and wifi sharing manager??
Wifi itself is working in 4.4.2 right?
Also, were your keyboard backlights working automatically or did you ened qwerty led?
is qwerty led something that needs to be running all the time. or "ongoing" in the top drawer?
Click to expand...
Click to collapse
Hey yeah the difference btw wifi direct and sharing is that in wifi direct you connect two devices directly to transfer files...
in wifi sharing you need to host a web adress to share your files
as a result in wifi sharing you host a list of your stuff on a web adress(local) which gets downloaded by other devices on your wifi connection
and a wifi sharing manager can either do this (host ur files using an ip) or my personal favorite is astro which can acess my pc's sharing folder over wifi which is preety awesome>..unlimited storage
also note that in a wifi sharing manager you cannot recieve files easily . . maybe airdroid but it can only run on a pc
wifi sharing apps are airdroid and other file managers like root browser
wifi direct requires specific drivers and libs... i guess.. hence not all devices can do it ..
anyway you should go for cm 11 or omni both are incredibly stable with an occasional hiccup.. which is occasional heh
also would suggest that if you do proceed to install please follow from the developer sources on xda rather than some blog etc

Any Custom Roms For the GT T325 in the Near Future?

Hey, i just purchased the Galaxy Tab Pro T325, after looking into Flashing Custom Rom i came to find out there isn't any out, needles to say this is a GREAT device and would have thought to see several cooked up by know, what would be Awesome in my opinion would be a Custom Rom made from the Source of the Latest Galaxy S5, if its possible, that would be hot. i have the note 3 Running a Custom Rom From HyperDrive (Big Up to Them, Best Rom so far for the Note 3), its based off the S5 and its OFF the HOOK. Just a thought, will be here Patiently waiting, cause i love this device..!!!!!
from t311 to t325
I asked me the same. I changed from the Tab3 8.0 lte to the t325 and the only customs i found are for the wifi version.
The T325 is really the outstandinged Tab out there.
I had from nexus7, nexus7 2013, Acer, note8 every tab that reads good at the specs.
But this great tab is perfect.
I rooted it and and changed all things that are possible with xposed. Thats a good deal at the moment.
Not everybody would pay this price for a tablet.
LowaEastSide said:
Hey, i just purchased the Galaxy Tab Pro T325, after looking into Flashing Custom Rom i came to find out there isn't any out, needles to say this is a GREAT device and would have thought to see several cooked up by know, what would be Awesome in my opinion would be a Custom Rom made from the Source of the Latest Galaxy S5, if its possible, that would be hot. i have the note 3 Running a Custom Rom From HyperDrive (Big Up to Them, Best Rom so far for the Note 3), its based off the S5 and its OFF the HOOK. Just a thought, will be here Patiently waiting, cause i love this device..!!!!!
Click to expand...
Click to collapse
konsolen said:
I asked me the same. I changed from the Tab3 8.0 lte to the t325 and the only customs i found are for the wifi version.
The T325 is really the outstandinged Tab out there.
I had from nexus7, nexus7 2013, Acer, note8 every tab that reads good at the specs.
But this great tab is perfect.
I rooted it and and changed all things that are possible with xposed. Thats a good deal at the moment.
Not everybody would pay this price for a tablet.
Click to expand...
Click to collapse
I have a very basic rom I was working on until I broke my screen that u guys can try...nothing but the knox apps have been removed so anything else u don't want will need to be deleted directly from the zip or uninstalled after flash (I'm sure u can find a list of whats safe to remove somewhere on the site). This package has been deodexed & zipaligned but that's about it...u will probably need to download "supersu" & which will ask u to update the"su" binary (just select "normal" method when prompted) after u flash. As an added bonus...4 way multiwindow also known as quad view from the note pro 12.2 has been enabled, along with lockscreen shortcuts as well as multiuser & I also added the assistive widget flashlight back but it only shows up in the widget drawer NOT in the homescreen add widget list for some reason. Also...i have included a fix for using the screen mirroring function (please thank @esgie) with a custom kernel/recovery & enabled the art runtime in the developer options (although this has NOT been tested yet & does NOT work with xposed or deodexed roms which basically deafeats the purpose)
I AM NOT RESPOSIBLE FOR DAMAGE TO YOUR DEVICE OR DELETION OF DATA...BE SURE TO BACKUP BEFORE U BEGIN!
http://forum.xda-developers.com/showthread.php?t=2752944
^ProPlusV1 THREAD (8.4 lte sm-t325 custom rom...added "lockscreen cards" feature)
https://drive.google.com/file/d/0B7yxeu9x48ILVk5MNXh1Z0tBQzg/edit?usp=sharing
^STOCK T325 NB7 ODIN (This is the factory odin file which contains stock firmware...in case something goes wrong just flash this)
WOW T Thanks for posting this up..!!!
Truly appreciate it, it beats a BLANK, and thats what i can really use right now, something to lighten the load a bit.... Again sorry to read about the situation your going through with your device, i know it felt like a stab in the chest when it cracked on you, i would have call the company i purchased it from and caused a scandal that would have made them send me a new one... The Best of luck.... Bless... :good:
THEDEVIOUS1 said:
I have a very basic rom I was working on until I broke my screen that u guys can try...nothing but the knox apps have been removed so anything else u don't want will need to be deleted directly from the zip or uninstalled after flash (I'm sure u can find a list of whats safe to remove somewhere on the site). This package has been deodexed & zipaligned but that's about it...u will probably need to re-root after u flash & also MAY need to wipe data but that shouldn't be necessary. For those of u brave enough to test...could someone please check the status of selinux after they flash & report back if enforcing is still set or not. As an added bonus...4 way multiwindow also known as quad view from the note pro 12.2 has been enabled, along with lockscreen shortcuts as well as multiuser & I also added the assistive widget flashlight back but it only shows up in the widget drawer NOT in the homescreen add widget list for some reason
I AM NOT RESPOSIBLE FOR DAMAGE TO YOUR DEVICE OR DELETION OF DATA...BE SURE TO BACKUP BEFORE U BEGIN!
https://drive.google.com/file/d/0B7yxeu9x48ILRHdXTnV6ZXZQRzQ/edit?usp=sharing
^8.4 LTE SM-T325 ROM
https://drive.google.com/file/d/0B7yxeu9x48ILOG00TE05LUl5ZHc/edit?usp=sharing
^ORIGINAL KERNEL (the included one was modified in attempt to disable selinux as well as implement init.d but I'm a noob so I think both expermints failed but I couldn't test thoroughly with my cracked lcd to be honest...just replace the boot.img in the root of the zip with this one to return to stock kernel if u encounter any issues)
Click to expand...
Click to collapse
Hey T.D. UNO
I just received your message with your Custom Rom included for our Lovely T325, Im so excited to get this Rom Fired up on my device, Im downloading it as I write this Response, Will definitely Let you know how everything goes once I run it for a Few, Thanks again my Friend, your THE MAN..!!! I have my fingers crossed that this one boots up, I want a Custom Rom So bad that i tried flashing the Wifi only Versions on the 8.4 section hoping it would have boot, the worse i expected was not having 4g/LTE, however it FAILED, didnt even Boot... lol. :cyclops:
Ok, All's well.
Just finished flashing and it booted up, all is well thus Far, Seems to be running smoothly, i will Mess with it for a couple of Days to see how it goes, is there anything i should know or do..? What would be cool is if we can some how flash the transparent weather clock thats on the Note 3, would that be possible..? If theres anything else you need tested Im here, and i was wondering what is that other file you posted in your message, it stated something about Kernel "boot (1).img"..? And ilso was wondering how your device is coming along, i think i read that you Found the lCD & Digitizer you need , did you finally find it, if so how much did it set you back..? ok, thanks again I'll definitely keep in touch, if we can Hook this device to the MAX that'll be AWSOME. )))

[Q&A] [rom] [test] [validus v7.0] [5.0.2]

Q&A for [rom] [test] [validus v7.0] [5.0.2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom] [test] [validus v7.0] [5.0.2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Downloading. Now tell how it goes. Thank You.
---------- Post added at 09:25 AM ---------- Previous post was at 08:36 AM ----------
Great job. Installed without any problem. Keep well.
Good
Like it. Runs smooth, everything that is said to work, works. But some bugs, aside that from gr8Nole's CM12. For example, I can't change keyboard, settings just crash when I'm trying to.
UPD: fixed in 21.01 version
net::ERR_UNKNOWN_URL_SCHEME
I am still playing around with this rom when I have time. So far to my surprise, everything is working nice as it should. The only problem I have come across so far though is when I click certain links, they dont seem to parse/click correctly. Several times when click a URL I get the error: net::ERR_UNKNOWN_URL_SCHEME An easy way to recreate it is to go to this link: http://forum.xda-developers.com/showthread.php?t=1538053 (SuperSU on XDA) and scroll down and click on the Download: SuperSU on Google Play (free) link while using the rom. I would post it here, but I am typing from a PC right now and have to be quick. The link loads just fine on the PC too. I have done this in the past with 4.4.4 roms and last I recall it was working properly. When searching Google for the error, everything relates to code, which is out of my knowledge. A couple forums with people having issues were all unresolved or were told to restart, but it makes no difference. Now it doesn't do this all the time, but it has happened several times which makes it a small annoyance mostly, and assuming it should not do this at all. Hopefully I am not the only one having this issue and it can be fixed. Let me know if there is any other info I can provide.
Hmmm, I cant recreate the issue here...all links open fine...ibopen everything with chrome....what are you using? I find that some links wont open properly with the stock browser...
Is there no t315 support? I can't find any lollipop ROM for my tab 3 t315
No, sorry...we need the device to build for it...as of now we only have a sm t310 ...
I don't mind testing ROMs if you want to develop some I want lollipop for my device lol
Its not a matter of what you want, or what you are willing to do....I am not the dev....or a dev period...I'm going by what they are telling me to tell you.....no device = no build....blind builds are a pain and headache for devs....sorry
Hey Aries...
Thanks for getting back. I felt like a noob when I realized I was using the stock browser. I just been use to PA gapps in the 4.4.4 builds totally replacing the stock browser with Chrome. Since we are using Banks with Validus, is there some way I can manually inject or replace the stock browser with chrome? If it is a pain in the ass or not possible, is there a way to remove the stock browser once Chrome is installed? The same situation applies with the Nova launcher. I slightly prefer the Apex launcher and have the pro version on Google play. In the 4.4.4 roms, I was able to use Root uninstaller to remove leftover stuff I will never use in 4.4.4 roms, but it fails to remove it in LP. It is possible the Root uninstaller app isnt updated for LP, and may test some alternatives. It is just a minor issue figure I would ask to see what your thoughts were on it. If I could somehow replace nova and the stock with Apex and Chrome so when I flash it, it would be great as it is already there without the extra apps I will not use.
Aside from that I finally had some time to flash the latest build 1/31? and it is nice. I ended up doing a clean install since I was not vested much into the previous build anyway. When going through the primary setup, typing the Google account name, etc. It closed unexpectedly and told me it did, but it was at the end. Not sure if it was just a hiccup, but it saved my info from what I can tell and still works great. The dark theme is a perfect fit too. I look forward for future updates and will continue to use them.
Rawb0Ss said:
Hey Aries...
Thanks for getting back. I felt like a noob when I realized I was using the stock browser. I just been use to PA gapps in the 4.4.4 builds totally replacing the stock browser with Chrome. Since we are using Banks with Validus, is there some way I can manually inject or replace the stock browser with chrome? If it is a pain in the ass or not possible, is there a way to remove the stock browser once Chrome is installed? The same situation applies with the Nova launcher. I slightly prefer the Apex launcher and have the pro version on Google play. In the 4.4.4 roms, I was able to use Root uninstaller to remove leftover stuff I will never use in 4.4.4 roms, but it fails to remove it in LP. It is possible the Root uninstaller app isnt updated for LP, and may test some alternatives. It is just a minor issue figure I would ask to see what your thoughts were on it. If I could somehow replace nova and the stock with Apex and Chrome so when I flash it, it would be great as it is already there without the extra apps I will not use.
Aside from that I finally had some time to flash the latest build 1/31? and it is nice. I ended up doing a clean install since I was not vested much into the previous build anyway. When going through the primary setup, typing the Google account name, etc. It closed unexpectedly and told me it did, but it was at the end. Not sure if it was just a hiccup, but it saved my info from what I can tell and still works great. The dark theme is a perfect fit too. I look forward for future updates and will continue to use them.
Click to expand...
Click to collapse
I keep stock browser and chrome on both my devices but if you want to remove it you can...validus has system app remover built in...go to developer settings and its right at the top....remove whatever system stuff you don't use or want there browser is in there..then reboot...simple....or you can use apps like titanium backup or rom toolbox pro to do the same thing....I prefer rom toolbox as it does tons of stuff....great app to buy...
As for nova you can remove it the same way if you want to....or just install apex and set it as your default launcher under Home in settings menu...
Ariesdroid said:
I keep stock browser and chrome on both my devices but if you want to remove it you can...validus has system app remover built in...go to developer settings and its right at the top....remove whatever system stuff you don't use or want there browser is in there..then reboot...simple....or you can use apps like titanium backup or rom toolbox pro to do the same thing....I prefer rom toolbox as it does tons of stuff....great app to buy...
As for nova you can remove it the same way if you want to....or just install apex and set it as your default launcher under Home in settings menu...
Click to expand...
Click to collapse
Awesome about the built in app remover! I will check out rom toolbox pro too. Now I can tweak away and get it setup. I cant wait to play with it later...
The best room I've ever seen! Fast and stable! good job!
Is working on it CF-AutoRoot ?
kolodziej25 said:
The best room I've ever seen! Fast and stable! good job!
Is working on it CF-AutoRoot ?
Click to expand...
Click to collapse
I'm not following what you're asking...Validus is rooted with superSU...It gets flashed when you flash the ROM...
Indeed, but I'm stupid!
Testing & Maintenance of Validus roms for Samsung Galaxy Tab 3 8.0 SM-T311
I have a Samsung Galaxy Tab 3 8.0 SM-T311.
And I am always ready to experiment on my tab.
So i can test the roms developed for the Samsung Galaxy Tab 3 8.0 SM-T311 and find the bugs and can maintain Validus for this device but i cant build the roms.
And i am also ready to learn how to develop a rom if you people are ready to teach me.
So please develop this great rom for this device model also.
Thank You.
Leela Krishna said:
I have a Samsung Galaxy Tab 3 8.0 SM-T311.
And I am always ready to experiment on my tab.
So i can test the roms developed for the Samsung Galaxy Tab 3 8.0 SM-T311 and find the bugs and can maintain Validus for this device but i cant build the roms.
And i am also ready to learn how to develop a rom if you people are ready to teach me.
So please develop this great rom for this device model also.
Thank You.
Click to expand...
Click to collapse
I have already stated many times that team validus only builds for devices we own and operate...sorry. If you learn to build ROMs our source is openly available along with cm source...
Crashing of System UI
The ROM's quite smooth till now, except for the crashing of the System UI whenever the theme is changed.
It's a minor issue and can be considered a negligible one. Other than this, I find the customization options a bit limited than what the other ROMs like SpiritRom (for v4.4), offered.
ishu.saviourfmankind said:
The ROM's quite smooth till now, except for the crashing of the System UI whenever the theme is changed.
It's a minor issue and can be considered a negligible one. Other than this, I find the customization options a bit limited than what the other ROMs like SpiritRom (for v4.4), offered.
Click to expand...
Click to collapse
Many features will be added back over time....no lollipop ROM has all those features yet...
Nice port, only chrome is a bit bugy and a game like crossy road does no t work.

[ROM][P905][UNOFFICIAL] CyanogenMod 12.1 | 20160124

Merry Christmas and Happy New Year!!!
A long time ago in a galaxy far, far away....
About a year ago I promised to do something for the P905 - but there were big problems with this without P905, now I have the P905 and I started to work on CyanogenMod for him.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Root
Settings -> About tablet -> press 7 times "Build number"
Then Settings -> Developer options -> Root access
Stylus gestures
Settings -> Language & input -> Stylus gestures
Gestures work only when you press a button on the stylus.
Known Issues
...
Need check
- BT tethering is not working (connected as client to a smartphone).
- All mouse buttons behave as left button click (right and wheel button are useless)
- Samsung S Mouse's "Recents" button is not detected/working
- Some of Samsung's BT Keyboard buttons are not detected/working: Recents App Drawer Menu etc
Links
CyanogenMod Build:
8: 20160124: https://drive.google.com/file/d/0B-6nm7Jks0W5VV9pT0pCOHliaE0/view?usp=sharing
7: 20160112: https://drive.google.com/file/d/0B-6nm7Jks0W5MC1zOE5nQW5oU3c/view?usp=sharing
6. 20160104: fix ir and flip: https://drive.google.com/file/d/0B-6nm7Jks0W5dHRzeUQ5RUh3OEk/view?usp=sharing
5. 20160102: proprietary cleanup, AudioFX crash: https://drive.google.com/file/d/0B-6nm7Jks0W5Yk1XQmp3MzlrbVE/view?usp=sharing
4. 20151230: add stylus gestures: https://drive.google.com/file/d/0B-6nm7Jks0W5aTJFeTlwSjJON00/view?usp=sharing
3. 20151229: clean version, fix ril and start wizard: https://drive.google.com/file/d/0B-6nm7Jks0W5RWVvOXFaMzRvUEU/view?usp=sharing
2. fix sounds and videorecord: https://drive.google.com/file/d/0B-6nm7Jks0W5QzlaWnVhUXV5dlE/view?usp=sharing
1. first public, but still very draft version https://drive.google.com/file/d/0B-6nm7Jks0W5QUV3X0RYUnNzN1k/view?usp=sharing
Gapps:
http://opengapps.org/
Platform: ARM
Android: 5.1
Recovery:
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Sources:
cm12.1 branch, in readme file (see device tree) all instructions for build.
Sources: https://github.com/CyanogenMod/
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Thanks:
Thanks to CyanogenMod team
XDA:DevDB Information
CM12.1 for SM-P905, ROM for the Samsung Galaxy Note Pro 12.2
Contributors
Valera1978
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20160112
Stable Release Date: 2016-01-12
Created 2016-01-14
Last Updated 2016-01-14
Glad that a developer started working on CM for P905 ☺
Thx a lot @Valera1978 for taking the time to make it happen
Will try it soon
Keep up the good work ?
Merry Christmass and Happy New Year to everybody!
Great News.
I just burnt this ROM (v2) and it’s great. Everything working great and fast so far.
Finally a ROM developed for this device. Thank you Valera1978.
I know this topic will be very busy after the hollydays, because half of the note pro owners have the Snapdragon version, and this ROM is great news for this crowd which was abandoned on their own untill now, but not anymore.
(OBS: mind you I have the SM-P905M, which is known to have a different modem hardware than the international SM-P905, so I didn’t expected to get LTE or 3G working, but I don’t use it anyway, because I thether from my phone, as most people do. Probably, in the future someone will figure out a way to burn the proper modem software for this particular version. Everything else is working great.)
Again, thanks Valera 1978.
---------- Post added at 03:01 PM ---------- Previous post was at 02:40 PM ----------
After some tests i realized that i couldn't get video record working. Seems like the camera is recording, but looks like the video is not saved anywhere. I'll do some more testing. Photo is OK.
@Valera1978
Hey my friend, thanks for your excellent work!
However in the 26/12 I had lost the 3g/4g capability.. In fact, I have a message here saying that there is no simcard. By the way, my tablet is a p905m.. But I was using a p905 LP firmware without any problem.. and in 25/12 build, simcard was working flawlessly.. Any clue? When I check Mobile Network in settings, there is no option for GSM but only for CDMA.. Maybe that's the problem..
Once more, thanks!
Hello.
Thank's for your hard work. One question I have before I install it: What about root in this ROM ?
Many thanks...
bemanet said:
Hello
Thank's for your hard work. One question I have before I install it: What about root in this ROM ?
Many thanks...
Click to expand...
Click to collapse
Root is working flawlessly. The rom is awesome, smooth as butter, fast like a lighting.. stable so far.. impressive work that @Valera1978 did, kudos to him!
The only problem I faced so far is gsm network that is missing on this last rom. I got a missing sim card message.. besides that it's a like CM official release for sure. Thanks to @Valera1978
For those in P905M this rom is totally compatible with your tablet.
Just pick the 12/25 version that has Mobile Network completely functional if you cannot stand without it.. but you gonna be without sound until our beloved dev @Valera1978 fix it.
If you can go without Mobile Network and don't wanna stand without sound pick the last release.. you are good to go, however, without 3G/4G capability..
Hopefully our beloved dev gonna release us soon the best of both world, I mean, and fully functional and interchangeable rom for both P905 and P905M :good: :good: :good:
andrew. mackew, was you able to record an play the recorded video with the v2 (26/12)?
root is working ok for me, but su# was not installed automatically as usual in custom roms, so i installed it afterwards. I've just learned that su# is not really needed but it improves security by not granting root automatically to any app that requests root.
I was under the impression that sm-p905M and SM-P905 had different modem hardware, because i read it somewhere in the forum, and i could never get 3G/LTE woking on my 905M with a 905 Rom. Maybe that's the case for Latin America, where the 3g/4g frequencies are different from those used in USA. I'm not shure if the modem hardware is really different, if only the frequencies in Latin America are different or if it's all compatible despite the differences.
js345 said:
andrew. mackew, was you able to record an play the recorded video with the v2 (26/12)?
root is working ok for me, but su# was not installed automatically as usual in custom roms, so i installed it afterwards. I've just learned that su# is not really needed but it improves security by not granting root automatically to any app that requests root.
I was under the impression that sm-p905M and SM-P905 had different modem hardware, because i read it somewhere in the forum, and i could never get 3G/LTE woking on my 905M with a 905 Rom. Maybe that's the case for Latin America, where the 3g/4g frequencies are different from those used in USA. I'm not shure if the modem hardware is really different, if only the frequencies in Latin America are different or if it's all compatible despite the differences.
Click to expand...
Click to collapse
All P905 and P905M have interchangeable modem if the bootloader is from the same Android branch.. (KK, LP, MM... )
To have it working properly, you have to first update to the last P905M Lollipop firmware and only after that to flash the latest P905 Lollipop firmware.
You can use flashfire to do that. If for any reason you don't get to install the modem properly, you need to flash the modem tar or md5 file through Odin separately from the rest of the firmware.
Doing this, you are good to go to use the P905 firmware in a completely functional way. :good:
New build up!!!
Thanks @Valera1978! You're the best! :good: :good: :good:
Looking forward to have your builds become CM official! :good: :good: :good:
EDITED: Just an update, the rom is working flawlessly. No bugs so far. Thanks to @Valera1978
Thanks Valera1978 the ROM is working properly. What about the pen ?
Nice work Rom working properly.
bemanet said:
Thanks Valera1978 the ROM is working properly. What about the pen ?
Click to expand...
Click to collapse
Pen working, the latest version includes support for stylus gestures - see header.
Valera1978 said:
Pen working, the latest version includes support for stylus gestures - see header.
Click to expand...
Click to collapse
You rock mate! Thank you very much for this!
Great !! Many thanks...
Any chance for a multi window?
Does IrDA work in this ROM?
esgie said:
Does IrDA work in this ROM?
Click to expand...
Click to collapse
Seems to be not working for now, using smart remote.
Please @Valera1978, could you take a look over this?
Valera1978 said:
Merry Christmas and Happy New Year!!!
A long time ago in a galaxy far, far away....
About a year ago I promised to do something for the P905 - but there were big problems with this without P905, now I have the P905 and I started to work on CyanogenMod for him.
Now all working, and now I'm focusing on build cm13.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Root
Settings -> About tablet -> press 7 times "Build number"
Then Settings -> Developer options -> Root access
Stylus gestures
Settings -> Language & input -> Stylus gestures
Gestures work only when you press a button on the stylus.
Known Issues
...
Links
CyanogenMod Build:
4. 20151230: add stylus gestures: https://drive.google.com/file/d/0B-6nm7Jks0W5aTJFeTlwSjJON00/view?usp=sharing
3. 20151229: clean version, fix ril and start wizard: https://drive.google.com/file/d/0B-6nm7Jks0W5RWVvOXFaMzRvUEU/view?usp=sharing
2: fix sounds and videorecord: https://drive.google.com/file/d/0B-6nm7Jks0W5QzlaWnVhUXV5dlE/view?usp=sharing
1: first public, but still very draft version https://drive.google.com/file/d/0B-6nm7Jks0W5QUV3X0RYUnNzN1k/view?usp=sharing
Gapps:
http://opengapps.org/
Platform: ARM
Android: 5.1
Recovery:
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Click to expand...
Click to collapse
I installed the lastest rom only (20151230)
It works great but I a problem with data connection
I have to change it to 3g and wait until the connection icon appears then switch it to LTE and it will take sometime till it convert to 4g
I need to do this after each reboot to get data network
any help is appreciated
and thanks for your rom and hard work
Teflanzy said:
I installed the lastest rom only (20151230)
It works great but I a problem with data connection
I have to change it to 3g and wait until the connection icon appears then switch it to LTE and it will take sometime till it convert to 4g
I need to do this after each reboot to get data network
any help is appreciated
and thanks for your rom and hard work
Click to expand...
Click to collapse
Hey, I didn't face such issue so far.
What is your modem version? Be sure to have the latest one (P905) installed and then try again.
The only issue so far is that IR is not working.. but for sure @Valera1978 is already looking over this.

[ROM]CleanSTOCK-MM.209-v3.4[Z00X/ZX551ML]-16 March

CleanSTOCK​
-->Features<--
based last asus stock firmware Z00X-4.209
Last Busybox
Last Magisk V11.1
Last SuperSU v2.79-SR3
Last Systemless Xposed V87.0
ZenUi 3.0 SystemUi from ZenFone 3
Dark Theme Status Bar (All Credits to @japh1997)
Blur Effect on the Status Bar/Recents Screen (All Credits to @BORETS24)
New Bootanimation (Google)
Notifications Android Nougat Style
Removed Notification of Headset Connected
61 Apps Removed
Added Google Keyboard (replaces the keyboard ASUS)
Removed "Cd rom install.iso"
Added Kernel Adiutor MOD
Added SystemUi Sounds, ringtones and Notifications from Google Pixel/Xperia/LG
New Wallpaper
Kernel STOCK
and more...
*BUGs: None ^^
List of Apps Removed
->Installation<-
->Full Tutorial (Portuguese Video)
->CleanSTOCK Official Site (PT/EN)
->Telegram Group (PT/EN)
->Bootloader Update Files
->Update to MMbootloader (Ifwi Version -> 096.0123)
->Install TWRP 3.0.2-m1 (Z00A)
->Full Wipe (System/Data/Cache/Dalvik)
->Install ROM and Reboot
->Downloads<-
->Z00X/ZX551ML [V3.4!]
->Add-on ASUS Themes App (Optional/Remove Dark Theme)
->VIPER4Arise + 10 Profiles (Optional)
***Credits/Thanks***
@IODroids for tests in ROM
@topjohnwu for Magisk and Xposed SystemLess
@Paget96 for L Speed BETA
@BORETS24 for SystemUi
@japh1997 for Dark Theme Status Bar
AsusTeam
Google
PayPal: [email protected]
I am not responsible for damage to the device, do so at your own risk!
XDA:DevDB Information
CleanSTOCK-MM, ROM for the Asus ZenFone Zoom
Contributors
GuilhermeXtreme
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: V3.4
Stable Release Date: 2017-03-17
Created 2017-03-16
Last Updated 2017-03-16
Reserved for screenshots..
Reserved for some more additional information.. (if required)
If you are dialer/contacts is crashing after the installation, patch this Contacts.zip from TWRP or a suitable custom recovery.
Check attachment:
Can you add a link to the version of twrp you say to use in the open? Looks very nice.
famewolf said:
Can you add a link to the version of twrp you say to use in the open? Looks very nice.
Click to expand...
Click to collapse
Download in "Bootloader Update Files", Inside of "MM Bootloader" folder.
Need Help
Hi, The rom looks Beautiful. I really want to try it out but i cant get the bootloader unlocked in the first place. Can You please help me? (P.S, I have an asus zenfone zoom 64gb)
hrithik12373 said:
Hi, The rom looks Beautiful. I really want to try it out but i cant get the bootloader unlocked in the first place. Can You please help me? (P.S, I have an asus zenfone zoom 64gb)
Click to expand...
Click to collapse
Need download unlock tool, download in ASUS site Support (Firmware pag.)
GuilhermeXtreme said:
Need download unlock tool, download in ASUS site Support (Firmware pag.)
Click to expand...
Click to collapse
I did, but whenever it starts unlocking, it fails and I never get the inverted screen.
I believe the problem is with the drivers on my laptop as i believe that i didnt install them properly, mostly because i cant figure out how to
hrithik12373 said:
I did, but whenever it starts unlocking, it fails and I never get the inverted screen.
I believe the problem is with the drivers on my laptop as i believe that i didnt install them properly, mostly because i cant figure out how to
Click to expand...
Click to collapse
Try using a different PC, fresh windows 7 or windows 10.
I have personally tested the ROM on 2 devices over 50+ times.. Worked and Without unlocker tool from Asus..
Upgrade
Can I use this rom to upgrade to Marshmallow? Iam currently using lollipop OS. Will this delete all existing photos and videos in phone memory? I have a rooted ZX551ML 128gb variant. Thanks.
IODroids said:
Try using a different PC, fresh windows 7 or windows 10.
I have personally tested the ROM on 2 devices over 50+ times.. Worked and Without unlocker tool from Asus..
Click to expand...
Click to collapse
Are you saying there is no need to use the Asus unlocker tool?
Saw a bunch of warning on their site saying I have sign away the first born if I ever use it.
Also does the various memory make any difference? Since there are 32/64 and 128gb versions.
@GuilhermeXtreme can you kindly shred some light on this posts.
IODroids said:
Try using a different PC, fresh windows 7 or windows 10.
I have personally tested the ROM on 2 devices over 50+ times.. Worked and Without unlocker tool from Asus..
Click to expand...
Click to collapse
I just finished trying on at least 4 different desktops and laptops. Still no luck.
(PS-The screenshots attached are the same errors I got on every single computer)
->Install TWRP 3.0.2-m1 (Z00A)
It works the same on Z00X?
I see IODroids got it working so I assume it works fine.
AlienTeck said:
Are you saying there is no need to use the Asus unlocker tool?
Saw a bunch of warning on their site saying I have sign away the first born if I ever use it.
Also does the various memory make any difference? Since there are 32/64 and 128gb versions.
Click to expand...
Click to collapse
I am on 128 GB variant, check screenshots and works fabulous.
IODroids said:
I am on 128 GB variant, check screenshots and works fabulous.
Click to expand...
Click to collapse
Did you find d out what's different between the 2 version s z00x and z00a?
I saw a comparability listing showing it as a zenfone 2 model and not zoom. Although both seem to run same programs including camera app. Google camera can't access some specialised camera processing on these phones and pics come out looking bad in anything but sun light. I think so will all other camera apps.
AlienTeck said:
Did you find d out what's different between the 2 version s z00x and z00a?
I saw a comparability listing showing it as a zenfone 2 model and not zoom. Although both seem to run same programs including camera app. Google camera can't access some specialised camera processing on these phones and pics come out looking bad in anything but sun light. I think so will all other camera apps.
Click to expand...
Click to collapse
You are absolutely correct, the major difference is camera.
I tried CleanStock MM which was based on Z00A base, everything worked except 2 important things (camera and mobile network, it was way too smooth comparatively).
Finally the OP of this thread @GuilhermeXtreme did the dirty work of porting the z00x base with his custom modifications, removing bloatware/rooting/magisk and other enormous stuff.
z00 or z00d varies because of hardware differences like 16, 32, 64, GB variants, different processors too.
Check wikipedia for more detailed information about this.
One thing I got to mention is, this phone uses Intel cisc CPU, installing Android apps not optimized for it draws more than twice the battery consumption. Not only does the CPU itself draw more power but the display does too. If all 3 are not synced the battery drains very fast. Even though Asus says install Google apps, I am not sure they are all optimized for Intel. Emulating is slower and also a power hog.
Just things I noticed while using it. During use the battery drain is huge. It will last 2 or 3 days with only phone use but not for apps. Using unoptimized apps drains battetyuch faster than on arm CPU. I went back to many Asus apps now which are huge in size but uses less power.
how to install xposed?
Nice work! Any chance of taking a peak at Lineage OS for this device?

Categories

Resources