[ROM][Stock Based][Z010D/ZC550KL] CleanMAX for Zenfone Max - Asus Zenfone Max ROMs, Kernels, Recoveries, & Othe

Features:
De-bloated, Rooted, BusyBox installed, Deodexed, Zipaligned, Sqlite3 binary, smoother interface, better RAM management, full kernel control (install Kernel Adiutor from Playstore), improved internet/data speed, tweaked read/write from memory. GPS accuracy improved.
Notes:
Just download the Asus apps you need from the Playstore. Download Asus Weather for the Lockscreen Clock.
As this is stock based, kernel CPU is still controlled by default Power Manager app, so set it to Performance to maximize CPU speeds.
If you want more control in tweaking this ROM, I recommend flashing ABS Tweaks v5.0, just make sure to delete everything in the init.d folder before flashing. ABS Tweaks thread is here: https://forum.xda-developers.com/android/software-hacking/tweak-arkaynine-boost-script-v3-0-t3120404
Instructions:
You must be on Marshmallow firmware with TWRP installed to flash this ROM.
Back up your current rom, check Boot, Aboot, System, Data in TWRP/Backup.
Clean install required. Wipe Cache/Dalvik/Data in TWRP.
Flash Rom zip.
Initial boot may take longer than usual, normally 8-10 mins.
Once phone boots and you complete setting up, download, install and run Uni-init.apk to activate init.d support, then reboot to activate tweaks.
ROM Download: https://mega.nz/#!sN1y0KwL!6qdvubX-n-CIoXTjCl7oTzmmEUp6_ioH9m7l33de69s

Thanks a lot, I m going to test it !

Volte and xposed support??

xposed yes, volte no since there is no volte yet in my country

mrichiem said:
xposed yes, volte no since there is no volte yet in my country
Click to expand...
Click to collapse
Sir you're also from the Philippines right?
Btw is this rom got some major bugs etc? Does off charging work?
Im currently using the RR official rom running nougat 7.1.1
How can I change to this rom? Should I reflashed the stock recovery and then flash stock rom from asus before flashing twrp again then flash this rom?
Or can I flash this directly from twrp while on RR nougat rom? Thanks in advance

since CleanMax is stock based, the bugs from the Lineage based roms are not present, so no offline charging bug. coming from a Lineage based rom, you just have to do a clean wipe before flashing this on TWRP.

Need to flashing Reaper Kernel ?

it's entirely up to you, flash Reaper or keep stock kernel. no problems with either

I did flash this coming from RR rom
Cant download any app at playstore (using wifi)
Higher ram usage than RR even there is nothing other app installed yet?
I did not flash any kernel just did follow all the instruction before I flash the rom zip file from the dl link
Did I do something wrong? Or it needs some tweaking before I can use it to its optimum performance/battery usage?

enjourneer said:
I did flash this coming from RR rom
Cant download any app at playstore (using wifi)
Higher ram usage than RR even there is nothing other app installed yet?
I did not flash any kernel just did follow all the instruction before I flash the rom zip file from the dl link
Did I do something wrong? Or it needs some tweaking before I can use it to its optimum performance/battery usage?
Click to expand...
Click to collapse
Any screenshot that we can see whats cause the problem??

Did you do a full wipe coming from RR?
Sent from my Zenfone Max on Xenon HD 7.1.1

mrichiem said:
Did you do a full wipe coming from RR?
Click to expand...
Click to collapse
yes I did wipe the cache,dalvik & data on twrp before flashing the rom...
I did observe also the ram usage it's quite higher than RR so I did just restore to using RR for now but still I'm looking forward to use this rom in your future updates keep up the goodwork sir
---------- Post added at 12:42 PM ---------- Previous post was at 12:41 PM ----------
mrichiem said:
Did you do a full wipe coming from RR?
Click to expand...
Click to collapse
one more thing sir can you provide the link of that XENON HD rom you are using? Thank you very much if you can

Do any one use this rom?

on Stock Rom, i cant set CPU speed to maximum when charging? How to fix it?

Stock kernel will always reset to default clock speed
Sent from my Zenfone Max on AEX 7.1.2

Wow. thanks. I want to try this now.
-----
Update: Flashed from MM stock and I've got bootlooped. Or may be it's because my stock MM is already on bootloop?

Flashed it on my device with absolutely no problems and it works as intended. I was previously using RR nougat ROM and I had no problem installing this after wiping everything in recovery except external storage (which contained the cleanMAX rom zip). Been using it for about a day and I`m pleased with the performance. Animations and system run smoothly and I haven`t encountered any errors or bugs yet. Ram usually sits at about 50-60% on casual use which is more than better for my taste. As for the battery, I can only say that it handles well so far. Installed the ROM this morning when battery was 90%, now it`s almost 8 pm and battery is at 70% having in mind I constantly used it for texting and installing my necesary apps. I figure I`d probably need a couple more days to see how the really battery performs. But overall for now I personally really like this rom, thank you creator!

is this for sd 410 or sd615

Teh Ais said:
is this for sd 410 or sd615
Click to expand...
Click to collapse
SD410

Is this rom suport volte??
Is this rom suport volte??in 4g

Related

[ROM][2016-10-27][Quarks][CM 13.0 Unofficial][6.0.1]

Latest update: 2016-10-27 To view a changelog, you can visit http://www.cmxlog.com/13/quark/ for a rough idea up to the build date.
Hi all. I was able to compile this stock build of CM 13.0 thanks to the efforts/hard works of Skrilax_CZ, baybutcher27, the folks who created Resurrection Rom Remix, and those over at CyanogenMod. It takes some minor features from Resurrection Rom apparently (i.e. notification light, some tiny performance/battery tweaks, and the ability to install Motorola apps). It is otherwise stock CM 13 and I use this daily. I and the other authors/devs assume no responsibility if you damage your device somehow.
Please don't feel pressured to update any more often than you wish .
Notes:
In order to make my calling work for Verizon, I had to go under Settings->Cellular networks->Preferred network type, and select LTE/CDMA (not LTE/GSM/UMTS). I assume GSM users should be fine with the defaults.
My recommendations to install:
Install TWRP 3.0.2 if you haven't already: http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
Perform a backup of your current system/ROM (not really needed if just flashing a newer version).
Perform a factory reset/wipe (if coming from another ROM). If not coming from another ROM, still safest to do a dalvik/art cache reset.
Install the .zip
Install the appropriate google apps (http://opengapps.org/ , ARM, 6.0). I would think nano or micro is best.
(Optional) Install a custom kernel. The best at the time of this writing are at:
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526 (CM-NX-RR-M builds for Marshmallow)
The latest is here: https://www.androidfilehost.com/?w=files&flid=50122
Wipe dalvik/art cache if you install another kernel.
Reboot and enjoy
Kernel Adiutor is very good for performance/power saving adjustments:
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
If you are using bhb27 kernels, then you should use his version of Kernel Adiutor:
https://www.androidfilehost.com/?w=files&flid=48767
Here is the link to the latest ROM on the hosting website:
[2016-10-27]https://www.androidfilehost.com/?fid=457095661767104611
Previous Builds:
https://www.androidfilehost.com/?w=files&flid=52716&sort_by=date&sort_dir=DESC
I'll be back to post updates fairly regularly (~every 1-2 weeks), but I also work full time in addition to being a Dad (those of you who are know how that is ) and won't really be able to response to PMs very well. The sources I used can be found under the post on XDA here at http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3316232 (device, vendor, and kernel trees). Thanks and God bless.
I just flash this version and its absolutely amazing.
Good job devs!
Bugs I noticed:
-Settings for LED doesn't work.
-Android Auto says is not a supported device.
-Quick Charge 2.0 doesn't seems to work.
-Phone gets really hot when charging.
-...
I have been tempted to flash this all day, but I love how smooth my phone has been on resurrection remix and I enjoy the extra customizations it has. I'm eagerly awaiting the next resurrection remix build for all the latest git changes
emi.guego said:
Bugs I noticed:
-Settings for LED doesn't work.
-Android Auto says is not a supported device.
-Quick Charge 2.0 doesn't seems to work.
-Phone gets really hot when charging.
-...
Click to expand...
Click to collapse
That's a bummer with some of those bugs. Hopefully those will be taken care of soon and I'll be able to sync and rebuild. Did all of these happen to be with the stock kernel, or did you happen to flash another (like baybutchers)? I've seen a few specific to the tiles, but I dont have an Android Auto system to check against. Also, if they are working (or some) in resurrection then I could possibly try to patch this.
calsurferpunk said:
That's a bummer with some of those bugs. Hopefully those will be taken care of soon and I'll be able to sync and rebuild. Did all of these happen to be with the stock kernel, or did you happen to flash another (like baybutchers)? I've seen a few specific to the tiles, but I dont have an Android Auto system to check against. Also, if they are working (or some) in resurrection then I could possibly try to patch this.
Click to expand...
Click to collapse
I don't know exactly, I installed it by downloading the zip and gapps to my PC and used the ADB sideload, before that I was using the last nightly of CM12.1. I did that and I didn't loose my info (either way I did a TWRP backup of everything, except cache previously), so I think it was the CM kernel. When I installed for the first time CM I flashed also the zip and gapps, if that way the stock kernel is changed with the CM kernel I think I'm using CM kernel.
emi.guego said:
I don't know exactly, I installed it by downloading the zip and gapps to my PC and used the ADB sideload, before that I was using the last nightly of CM12.1. I did that and I didn't loose my info (either way I did a TWRP backup of everything, except cache previously), so I think it was the CM kernel. When I installed for the first time CM I flashed also the zip and gapps, if that way the stock kernel is changed with the CM kernel I think I'm using CM kernel.
Click to expand...
Click to collapse
Yeah that sounds like the stock cm kernel then if you didn't flash anything like that separately. I don't know if it would help, but you could always try the other kernel I posted about and see if Android Auto works (would have to restore your backup if you didn't want to keep it). It just depends how much you care and if it's worth staying with the ROM to you. There's obviously bound to be some bugs, but I enjoy using a lean version of the latest and greatest system. Thanks for the feedback .
Installed it 2h ago, everything is running fine so far.
This is smoother than the old cm and than rr too. I'm impressed!
I'm using Bhb Kernel.
My phone is turbo charging, led is working...
No bugs for me.
Nice job, mate! I'm glad we got a new cyanogenmod that we can have updates. Keep strong!
Enviado de meu Moto MAXX usando Tapatalk
thanks,
hope bat drain @ standby will be best from rom's i tested.
somebody can advice what app use to get best standby time? im using Purify but i think it doesnt help much. also on mostly rom'z even when battery mode is set to eco that doesnt help much
Maro' said:
thanks,
hope bat drain @ standby will be best from rom's i tested.
somebody can advice what app use to get best standby time? im using Purify but i think it doesnt help much. also on mostly rom'z even when battery mode is set to eco that doesnt help much
Click to expand...
Click to collapse
I've just been going under the built in privacy guard and setting advanced permissions to where apps I don't need to start at boot are denied, in addition to also denying a lot of them from being allowed to keep the device awake. I get very little battery drain in standby this way. If the cell signal is too weak though, it's really hard to prevent extra drain as it over compensates to get a good signal.
Updated ROM to CyanogenMod 13 changes as of March 24.
calsurferpunk said:
Updated ROM to changes as of March 24.
Click to expand...
Click to collapse
Changelog?
Debuffer said:
Changelog?
Click to expand...
Click to collapse
It's a little hard to say since there is a lot and I am just syncing to the main CyanogenMod 13 repository. However, this is a good link if you go by the date and something similar (such as the Nexus 6 which shares a lot of hardware).
http://www.cmxlog.com/13/shamu/
This may be a dumb question but does this have VoLTE enabled and working(Verizon user)? Since it is CyanogenMod based I assume not but just waned to ask.
calsurferpunk, can you fix wifi on XT1254 with stock Brasil 1225's 6.0.1 ROM? CM12.1 and CM13 detect Moto Maxx and Droid Turbo radio very good!
*GPS*
working for U guys? For me not (BB kernel, location: Europe)
soccertolive said:
This may be a dumb question but does this have VoLTE enabled and working(Verizon user)? Since it is CyanogenMod based I assume not but just waned to ask.
Click to expand...
Click to collapse
Your assumption is correct. I don't believe this has ever worked with CyanogenMod. I'm on Verizon and haven't seen it.
Maro' said:
*GPS*
working for U guys? For me not (BB kernel, location: Europe)
Click to expand...
Click to collapse
I had this problem on other ROMs as well until I restored the original manufacturer ROM, set GPS to device only, verified it worked, then flashed the new ROM. You might have to do the same here. I believe it's been a long ongoing bug with CyanogenMod (and probably others).
pretty thx for the cm13,did it have ambient display?
I am downloading this at work right now. It is slow and will take me a couple to download.
While it is dl'g, I have a question about wiping. Do I still need to do a factory reset if I am coming from a marshmallow cm13 RR rom?Baybutchers?
Also, I have not been able to get my GPS to work properly. In your post #17, you referred to original manufacturer rom. Where can I get this rom to set the gps? I do have computerfreek's room saved as a backup if I could use it? I don't have easy access to a computer to do a fastboot.
Thx.
Sent from my DROID Turbo using Tapatalk
Wait, ROM was updated to day 24?

Custom rom with deactivated big cores?

Tried search and nothing found.
Is there a custom rom on lollipop or nougat where the big cores have been disabled in the kernel?
I've been using the stock firmware with the 2 big cores disabled for some time and the phone working fine.
Thanks
Looking for the same, mine is H811 and there is no tot file to disable the Big Cores
I'm trying to flash with H810 kdz and install the tot file for the H810 too, i think doing that, i'll solve the problem but now is another problem, HOW CAN I DO IT?! Hehe
Use kernel auditor on any rooted ROM and disable yourself
dpgc213 said:
Tried search and nothing found.
Is there a custom rom on lollipop or nougat where the big cores have been disabled in the kernel?
I've been using the stock firmware with the 2 big cores disabled for some time and the phone working fine.
Thanks
Click to expand...
Click to collapse
NestorRamUre said:
Looking for the same, mine is H811 and there is no tot file to disable the Big Cores
I'm trying to flash with H810 kdz and install the tot file for the H810 too, i think doing that, i'll solve the problem but now is another problem, HOW CAN I DO IT?! Hehe
Click to expand...
Click to collapse
Imperium kernel has a version for marshmallow with disabled big cores, Titan kernel has a version for nougat. But your bootloader has to be unlocked to use them.
ufocus said:
Imperium kernel has a version for marshmallow with disabled big cores, Titan kernel has a version for nougat. But your bootloader has to be unlocked to use them.
Click to expand...
Click to collapse
I already have my bootloader unlocked!
Can you help me to install this kernel on it?
I'll be pleased to get your help man!
NestorRamUre said:
I already have my bootloader unlocked!
Can you help me to install this kernel on it?
I'll be pleased to get your help man!
Click to expand...
Click to collapse
Imperium kernel v7.3c (marshmallow aka v20 firmwares) with disabled BIG cores
https://androidfilehost.com/?fid=745849072291682063
Flash it in TWRP then wipe dalvik/ART cache, cache and your good to go.
ufocus said:
Imperium kernel v7.3c (marshmallow aka v20 firmwares) with disabled BIG cores
https://androidfilehost.com/?fid=745849072291682063
Flash it in TWRP then wipe dalvik/ART cache, cache and your good to go.
Click to expand...
Click to collapse
Where you recommend me to install the kernel, on stock android or Imperium Rom?
Can i intall it on LineageOS or RR too?
NestorRamUre said:
Where you recommend me to install the kernel, on stock android or Imperium Rom?
Can i intall it on LineageOS or RR too?
Click to expand...
Click to collapse
You can on both, it's your decision to make, Imperium kernel is for stock and stock based custom ROMs only.
Titan has a version for stock and another for LOS, AOSP, RR LOS based... etc. BUT there's only three ROMs compatible with Titan for LOS and LOS based for now.
ufocus said:
You can on both, it's your decision to make, Imperium kernel is for stock and stock based custom ROMs only.
Titan has a version for stock and another for LOS, AOSP, RR LOS based... etc. BUT there's only three ROMs compatible with Titan for LOS and LOS based for now.
Click to expand...
Click to collapse
Man i've tried many times and it won't install the kernel, i've been trying to install it on LineageOS, ResurrectionRemix and a cople more but is just says "Installing kernel", and it won't pass from there
And i want to install stock but i don't know how
ufocus said:
Imperium kernel v7.3c (marshmallow aka v20 firmwares) with disabled BIG cores
https://androidfilehost.com/?fid=745849072291682063
Flash it in TWRP then wipe dalvik/ART cache, cache and your good to go.
Click to expand...
Click to collapse
Man thanks you so much!
What i did was, install Stock KDZ (H81120v_00_0425) and having already TWRP installed i flashed Imperium Kernel (KERNEL - h815_imperium-7.3c_4cores_TWRP-flashable) and BOOM! IT WORKED PERFECTLY! Now my phone is living again without bootloop issues!
I think this is the only way to fix H811 bootloop issus:
1. Try to boot your device, at least 1 minute to active Developer Options and inside it active USB Debugging and OEM Unlock, after it turns off again.
2. Install TWRP, and flash 4cores Imperium Kernel.
3. Done! Your phone will be back to life again!
NestorRamUre said:
Man thanks you so much!
What i did was, install Stock KDZ (H81120v_00_0425) and having already TWRP installed i flashed Imperium Kernel (KERNEL - h815_imperium-7.3c_4cores_TWRP-flashable) and BOOM! IT WORKED PERFECTLY! Now my phone is living again without bootloop issues!
I think this is the only way to fix H811 bootloop issus:
1. Try to boot your device, at least 1 minute to active Developer Options and inside it active USB Debugging and OEM Unlock, after it turns off again.
2. Install TWRP, and flash 4cores Imperium Kernel.
3. Done! Your phone will be back to life again!
Click to expand...
Click to collapse
Glad you've figured it out and posted it.

EMUI 4.1 [ROM] [MT6735] [32bit] + Kernel 3.18.19

Once again, I am Here to present my new Port Rom --
**--+--EMUI 4.1--+--**
About Rom ("_")
Smooth
Fast
Stable
Beautiful :angel:
Now, Comes to Installation Process.
Same as other Roms, but tell i will tell you once again.
Installation:--
-Goto Twrp
- Wipe Cache, dalvik, System, Data
-Goto Install
-Select Emui 4.1 Rom zip
-Flash
-flash patch [for Camera]
INFO:
Only important GApps like Google App, Gmail and Chrome, as well as the Google core apps and services (which must be in ROM) installed. All the other GApps debloaded - everyone can use Playstore to install what is needed (Google Music, Drive, Maps ...)
Downloads :-
Rom -- https://drive.google.com/file/d/1x4IkhOm3Y7b77AQyTDUY4YAihg8FQthl/view?usp=drivesdk
Camera Patch -- https://drive.google.com/file/d/0B4VkGc5GGk30YUZja1hpMVc0UTQ/view?usp=drivesdk
Bugs:-
- Only Volte (hard to fix) :crying:
- you tell me
If you like my work - fell free to donate via Paytm - Akashdeep Shukla (8077007389) :fingers-crossed:
ROM :- EMUI 4.1
ANDROID :- MARSHMALLOW
KERNEL :- 3.18.19 [x32]
Credits:-
Me (For Porting)
4pda (for Rom)
And You guys for all your Support
Here the Screenshots
Is this ROM similar to MIUI? What are the advantages of this ROM over MIUI though?
DystopianDJ said:
Is this ROM similar to MIUI? What are the advantages of this ROM over MIUI though?
Click to expand...
Click to collapse
Hotspot working fine...
DystopianDJ said:
Is this ROM similar to MIUI? What are the advantages of this ROM over MIUI though?
Click to expand...
Click to collapse
Stable , smooth and its a stock rom of huawei
I faced a wierd problem after flashing the ROM,
I could not turn the WiFi on..
But then I SOLVED the issue by reflashing the ROM and then skipping all the initial step such as Google account login...
Then WiFi started working fine...later I logged in with no issues...:good:
Does this rom supports Magisk and Xposed for Magisk module? If someone tries then do let us know.
This ROM is epic. Thanks for this, just that the low DPI is a little to small for me though (yes I have tried using Easy DPI Changer). I guess I'll just increase the font size using the original DPI of this ROM. xD
The only problem I've experienced is the problem of camera not being able to focus properly. Please check if this a general problem as it was persistent in mine.
Thanks again!
DystopianDJ said:
This ROM is epic. Thanks for this, just that the low DPI is a little to small for me though (yes I have tried using Easy DPI Changer). I guess I'll just increase the font size using the original DPI of this ROM. xD
The only problem I've experienced is the problem of camera not being able to focus properly. Please check if this a general problem as it was persistent in mine.
Thanks again!
Click to expand...
Click to collapse
Flash the updated camera patch provided with MIUI 8 ROM...
You can also flash the same patch with stock ROM
manishah.1996 said:
Flash the updated camera patch provided with MIUI 8 ROM...
You can also flash the same patch with stock ROM
Click to expand...
Click to collapse
Okay thanks for this. I had flashed the second updated Camera Fix that was given in this thread and I had experienced the error.
But what do you mean by flashing it with Stock ROM? Stock ROM already has everything working properly though.
DystopianDJ said:
Okay thanks for this. I had flashed the second updated Camera Fix that was given in this thread and I had experienced the error.
But what do you mean by flashing it with Stock ROM? Stock ROM already has everything working properly though.
Click to expand...
Click to collapse
Not in this threads....In the MIUI thread..
And I've flashed the camera fix patch on both this and stock ROM because it gives the background some decent blur to make the pic look good..
manishah.1996 said:
Not in this threads....In the MIUI thread..
And I've flashed the camera fix patch on both this and stock ROM because it gives the background some decent blur to make the pic look good..
Click to expand...
Click to collapse
Wow thanks! I'll try patching the MIUI one on Stock ROM rn.
DystopianDJ said:
Wow thanks! I'll try patching the MIUI one on Stock ROM rn.
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B59Ujza640rNN2RfUFczNl9YTTg
Has anyone tried Magisk Or Exposed with this Rom?? Please revert.
I installed the Rom and i must say it looks so good and works so smooth the icons and interface looks beautiful.. The only strange problem am facing is that am not able to connect to wifi as am not getting any mac address or the IP address in the advanced setting menu, so please help me to fix this as i dont wanna switch from this rom because of this problem.. i already installed the Rom from the scratch by also wiping the internal storage but still the same issue, any fix will be really appreciated..
solkarsalman said:
I installed the Rom and i must say it looks so good and works so smooth, battery backup is amazing also the icons and interface looks beautiful.. The only strange problem am facing is that am not able to connect to wifi as am not getting any mac address or the IP address in the advanced setting menu, so please help me to fix this as i dont wanna switch from this rom because of this problem.. i already installed the Rom from the scratch by also wiping the internal storage but still the same issue, any fix will be really appreciated..
Click to expand...
Click to collapse
Flash the ROM.....
Don't sign in to your Google account during the initial setup...skip everything...
Once the setup is complete... reboot...and sign in to WiFi....
DystopianDJ said:
This ROM is epic. Thanks for this, just that the low DPI is a little to small for me though (yes I have tried using Easy DPI Changer). I guess I'll just increase the font size using the original DPI of this ROM. xD
The only problem I've experienced is the problem of camera not being able to focus properly. Please check if this a general problem as it was persistent in mine.
Thanks again!
Click to expand...
Click to collapse
Pleasure brother:fingers-crossed:
manishah.1996 said:
Flash the ROM.....
Don't sign in to your Google account during the initial setup...skip everything...
Once the setup is complete... reboot...and sign in to WiFi....
Click to expand...
Click to collapse
And that fixed the issue.. Thank you so much for the help..
" Friends any updates about magisk with this rom?
The only bug I experienced was that after changing the DPI to 320, the UI literally broke. The notification bar had all the broken lines, the icons went haywire. Everything seemed like a chaos which ruined the experience for me though. I don't exactly think if a fix is possible since it might be the issue of porting for a device but regardless, it was important to mention.
solkarsalman said:
I installed the Rom and i must say it looks so good and works so smooth, battery backup is amazing also the icons and interface looks beautiful.. The only strange problem am facing is that am not able to connect to wifi as am not getting any mac address or the IP address in the advanced setting menu, so please help me to fix this as i dont wanna switch from this rom because of this problem.. i already installed the Rom from the scratch by also wiping the internal storage but still the same issue, any fix will be really appreciated..
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
akash_eric said:
Once again, I am Here to present my new Port Rom --
**--+--EMUI 4.1--+--**
About Rom ("_")
Smooth
Fast
Stable
Beautiful :angel:
Now, Comes to Installation Process.
Same as other Roms, but tell i will tell you once again.
Installation:--
-Goto Twrp
- Wipe Cache, dalvik, System, Data
-Goto Install
-Select Emui 4.1 Rom zip
-Flash
-flash patch [for Camera]
INFO:
Only important GApps like Google App, Gmail and Chrome, as well as the Google core apps and services (which must be in ROM) installed. All the other GApps debloaded - everyone can use Playstore to install what is needed (Google Music, Drive, Maps ...)
Downloads :-
Rom -- https://drive.google.com/file/d/1x4IkhOm3Y7b77AQyTDUY4YAihg8FQthl/view?usp=drivesdk
Camera Patch -- https://drive.google.com/file/d/0B4VkGc5GGk30YUZja1hpMVc0UTQ/view?usp=drivesdk
Bugs:-
- Only Volte (hard to fix) :crying:
- you tell me
If you like my work - fell free to donate via Paytm - Akashdeep Shukla (8077007389) :fingers-crossed:
ROM :- EMUI 4.1
ANDROID :- MARSHMALLOW
KERNEL :- 3.18.19 [x32]
Credits:-
Me (For Porting)
4pda (for Rom)
And You guys for all your Support
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:

Ideal ROM to have on your Z2 Plus!

Hey there,
I have started using this ROM for a while and the Combination of this ROM and the Kernel is great!
The ROM I am talking is AOSiP. Though this ROM is Unofficial and quite old, the developer i.e. ankit99 {https://forum.xda-developers.com/member.php?u=4924861} has done a fabulous job in maintaining the stability and functionality of this ROM while keeping Bugs minimum!
The Kernel I am talking about is called Jaguar Kernel. If you are in the development of ZUK Z2 Plus, Jaguar ROM is hard to resist due to its mind blowing stability. This Kernel is derived from the very same ROM. Probably the best Kernel I am working with. Dark Moon and Heliox are great without any doubt, just they never worked great for me on any ROM.
Instructions:
1. Take a Nandroid backup first. In case anything goes wrong, you should have some back point to restore.
2. Wipe Dalvik Cache, Cache, Data & System. I recommend deleting Android folder from Internal Storage (sdcard) from TWRP File Manager.
3. Flash the ROM, Gapps (Use 7.1 & 64-bit ones, for Z2 Plus).
4. Flash the Kernel at the last and wipe Cache/Dalvik and reboot!
5. Note, First boot will take some time.
6. Post features, I recommend dpi as 380 to be ideal for Z2 Plus.
Enjoy your Android Experience!
Links:
ROM [AOSiP]: https://www.androidfilehost.com/?fid=817550096634791555
Kernel [Jaguar]: https://forum.xda-developers.com/devdb/project/dl/?id=27209
Note: The mentioned ROM and Kernel should receive credits from their respective Developers. I am just getting things together for the users.
Thank You!
sanketp60 said:
Hey there,
I have started using this ROM for a while and the Combination of this ROM and the Kernel is great!
The ROM I am talking is AOSiP. Though this ROM is Unofficial and quite old, the developer i.e. ankit99 {https://forum.xda-developers.com/member.php?u=4924861} has done a fabulous job in maintaining the stability and functionality of this ROM while keeping Bugs minimum!
The Kernel I am talking about is called Jaguar Kernel. If you are in the development of ZUK Z2 Plus, Jaguar ROM is hard to resist due to its mind blowing stability. This Kernel is derived from the very same ROM. Probably the best Kernel I am working with. Dark Moon and Heliox are great without any doubt, just they never worked great for me on any ROM.
Instructions:
1. Take a Nandroid backup first. In case anything goes wrong, you should have some back point to restore.
2. Wipe Dalvik Cache, Cache, Data & System. I recommend deleting Android folder from Internal Storage (sdcard) from TWRP File Manager.
3. Flash the ROM, Gapps (Use 7.1 & 64-bit ones, for Z2 Plus).
4. Flash the Kernel at the last and wipe Cache/Dalvik and reboot!
5. Note, First boot will take some time.
6. Post features, I recommend dpi as 380 to be ideal for Z2 Plus.
Enjoy your Android Experience!
Links:
ROM [AOSiP]: https://www.androidfilehost.com/?fid=817550096634791555
Kernel [Jaguar]: https://forum.xda-developers.com/devdb/project/dl/?id=27209
Note: The mentioned ROM and Kernel should receive credits from their respective Developers. I am just getting things together for the users.
Thank You!
Click to expand...
Click to collapse
Hey there is a Oreo build in testing for this ROM . you should tryout.
TanajiKC said:
Hey there is a Oreo build in testing for this ROM . you should tryout.
Click to expand...
Click to collapse
This post is based on having a highly stable experience! The ROM you are talking about is underdevelopment and might have bugs.
Thanks for replying!:good:
sanketp60 said:
This post is based on having a highly stable experience! The ROM you are talking about is underdevelopment and might have bugs.
Thanks for replying!:good:
Click to expand...
Click to collapse
hi, when i try to use different kernel notification pulse gets broken, can you test it please? ive tried at least 6 diferent roms with different combinations of kernels
DemiurgoX said:
hi, when i try to use different kernel notification pulse gets broken, can you test it please? ive tried at least 6 diferent roms with different combinations of kernels
Click to expand...
Click to collapse
I am using this ROM and Kernel myself on my personal device and notification pulse are working just fine!
The screenshot attached is from my own device and Jaguar Kernel is called Lika-bebebe.
So, you can try it out!
sanketp60 said:
I am using this ROM and Kernel myself on my personal device and notification pulse are working just fine!
The screenshot attached is from my own device and Jaguar Kernel is called Lika-bebebe.
So, you can try it out!
Click to expand...
Click to collapse
thank you for the quick reply, lots of custom roms, fingerprint sensor doesnt work sometimes, is this the case with this rom? and by the way, i just found a zui general issue concerning no notification sound on which i opened a discussion written: zui rom general issue just do the test: make a call with zuk, then on another phone, send lots of sms to zuk while on a call, youll hear beeping sound for each message received, put it on speaker so you can hear it, hang up, done, no more notification sound
DemiurgoX said:
thank you for the quick reply, lots of custom roms, fingerprint sensor doesnt work sometimes, is this the case with this rom? and by the way, i just found a zui general issue concerning no notification sound on which i opened a discussion written: zui rom general issue just do the test: make a call with zuk, then on another phone, send lots of sms to zuk while on a call, youll hear beeping sound for each message received, put it on speaker so you can hear it, hang up, done, no more notification sound
Click to expand...
Click to collapse
Regarding Fingerprint Scanner, it works simply great! It responds almost 99% of the times and quite fast even more than stock ROM according to my experience. And the fact you say about no notification issue, there is an Option to automatically enable DND during calls in this ROM and it disables immediately after call is hung. So, you should not encounter such issues practically. I am using this ROM for a while now and really in Love with its stability. Go for it!:good:
I have attached a screen shot regarding the Auto DND during call option.
sanketp60 said:
Regarding Fingerprint Scanner, it works simply great! It responds almost 99% of the times and quite fast even more than stock ROM according to my experience. And the fact you say about no notification issue, there is an Option to automatically enable DND during calls in this ROM and it disables immediately after call is hung. So, you should not encounter such issues practically. I am using this ROM for a while now and really in Love with its stability. Go for it!:good:
I have attached a screen shot regarding the Auto DND during call option.
Click to expand...
Click to collapse
is there any way to implement that in cal dnd in zui roms?
sanketp60 said:
Regarding Fingerprint Scanner, it works simply great! It responds almost 99% of the times and quite fast even more than stock ROM according to my experience. And the fact you say about no notification issue, there is an Option to automatically enable DND during calls in this ROM and it disables immediately after call is hung. So, you should not encounter such issues practically. I am using this ROM for a while now and really in Love with its stability. Go for it!:good:
I have attached a screen shot regarding the Auto DND during call option.
Click to expand...
Click to collapse
hi again, thanx for this great rom, i really am enjoying it, like you said, with jaguar kernel didnt break notification light
DemiurgoX said:
is there any way to implement that in cal dnd in zui roms?
Click to expand...
Click to collapse
No man, as long I have used custom ROMs, this feature is toggleable in this ROM itself!
Im running PureFusionOS + Jaguar Kernel for about 2 months now, and the feature set + stability from it is perfect. I would wish that PureFusion could have better performance/battery efficiency though
I've justobought this phone. Do you recommend me to flash this rom+Kernel as my first daily driver? Or should I go with aex4.5?
maziu7 said:
I've justobought this phone. Do you recommend me to flash this rom+Kernel as my first daily driver? Or should I go with aex4.5?
Click to expand...
Click to collapse
I would recommend this ROM for your daily driver as it is a mix balanced performance and battery life, providing almost stock Android with lots of customizations! Also, a MIUI camera flash would be the icing on the cake.:good:
sanketp60 said:
I would recommend this ROM for your daily driver as it is a mix balanced performance and battery life, providing almost stock Android with lots of customizations! Also, a MIUI camera flash would be the icing on the cake.:good:
Click to expand...
Click to collapse
thanks, can you post some screenshots (including the utouch configuration)?
maziu7 said:
thanks, can you post some screenshots (including the utouch configuration)?
Click to expand...
Click to collapse
There you go!:good:
sanketp60 said:
There you go!:good:
Click to expand...
Click to collapse
thanks man
I installed this rom yesterday and it works perfectly but I'm experimenting a huge bug: it charges extremely slowly and the phone and the charger both get very hot. I'm on aosip+jaguar december version
DemiurgoX said:
hi again, thanx for this great rom, i really am enjoying it, like you said, with jaguar kernel didnt break notification light
Click to expand...
Click to collapse
How it is compared to AEX 4.4? Does it have camera blobs from zui stock nougat? GPS, wifi hotspot?
Fingerprint, slowmotion videos?
If anyone else has these answers please reply.

Most stable Oreo based custom ROM

I am giving my girlfriend my Nexus 5x while I am out of the country and am hoping to be able to keep some of the extra features of a custom ROM like tethering, tap to wake and a custom kernel without compromising stability and ease of updating over stock.
Currently I am using the latest Nougat based PixelROM and I like the additions of it but I am unsure if the Oreo release is totally solid or easy to update. If none of the Oreo roms are stable I will just restore to stock but wanted to get opinions first.
Thanks in advance!
AICP has been stable for me since I installed it in mid-January, no force closes, random reboots, or unexpected battery drains. It's based on LineageOS though, not stock.
@jolness1: I recommend ABC, latest bullhead-update: features ≈Pixel, stable, regular updates, lovely devs.
@rp158 are you use gapps because I have battery drain on ABC (clean install) and now I use AEX extended unofficial with NanoDroid mod and rocks fine without drain.
@Luca Toni, why should I use GApps Are you sure, you took the recommended package?
@rp158 Yes , I've been on recommended gapps by ezio.
Luca Toni said:
@rp158 Yes , I've been on recommended gapps by ezio.
Click to expand...
Click to collapse
Can you post a link to that nanodroid mod? I have battery drain whenever u use gapps too
Greatness_GH said:
Can you post a link to that nanodroid mod? I have battery drain whenever u use gapps too
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/magisk/module-nanomod-5-0-20170405-microg-t3584928/page267

Categories

Resources