Hi guys,
I updated to Nougat and flashed the OxygenOS 4.1.6. Everything worked fine but I miss xposed too much so i wanted to go back to Marshmallow. No matter if I restore my newest 6.1 backup or my old Nandroid backup in twrp or flash any other ROM, my op3 always stucks in the bootscreen with the Oneplus logo now and nothing happens. Just when I flash the 4.1.6 zip again, the phone starts and works well.
Does anyone have an idea how i could restore one of my backups or flash any Oxygen 3.x ROM?
Many, many thanks for your help!
Save your backup off your phone, then clean flash whichever version of OOS you want to downgrade to. Once you can boot into OOS again, restore your old backup.
Related
[SOLVED]
Hello guys, hope that someone could help me.
I had a 4.4.2 rom (note4neo 2.0) and i wanted to try 5.1.1 so first of all i mad a full Nandroid Backup through TWRP and also a titanium bkp. Later on i installed lollipop original rom through ODIN and everything was ok. I then followed a guide from Noble Rom for rooting and installing TWRP. Everything went ok, but i had problems with some rooting app (like titanium) and so i decided to revert back to 4.4.2.
At first I rebooted into recovery, made a full wipe (even system) then restored previously backup. Seemed to be ok, but then when rebooted it stucks on boot logo (i left booting for 28 minutes, so....).
Then i tried to wipe cache, dalvik and data and reboot again: no changes.
I then decided to reflash previously twrp (the one that i used for bkp). Flashes went ok, but i have "recovery is not seandroid enforcing" message on the top (even with the lollipop twrp: maybe is this the key of my problem?!?).
Restoring backup from older twrp didn't work as well...
Of course i can enter both Download and Recovery mode.
Now i flashed back the original 5.1.1 through ODIN in order to go back to original lollipop and see what u guys can tell me to do to restore backup i made..
Thank you very much for your help
I was thinking that maybe i should flash a stock 4.4.2 before restore the backup...
Now i'm downloading it and see what happens...tell me if i may be right
Yes you should first restore a 4.4.2 firmware before flashing TWRP and then you'll be able to restore your backup
lennon123 said:
Yes you should first restore a 4.4.2 firmware before flashing TWRP and then you'll be able to restore your backup
Click to expand...
Click to collapse
Update: Flashed 4.4.2, all ok. Then rooted, twrp and all ok again
After i restored Backup and stuck on boot.
Then i made again all the steps: STOCK, ROOT, TWRP, then Base version of the Rom and all ok.
At this point i was thinking it was done and restoring would have been just fine...unfortunatley it doesn't. Stuck on boot again.
So i reflashed the Base version of the mod rom and: it started with my restored app Btw i'm encountering problems like no home button, no volume icon, no settings shortcut. Now i made a cache and dalvik wipe but problems still remain..
Any idea?
After some attempts to solve those problems i stucked again on boot..
So now my plan is to: Flash STOCK rom, Root, Twrp, Base mod rom (everything always ok so far) and then restore JUST DATA from backup... Not touching system and boot should let the rom works just fine...at least i hope so :'D
Ok, as i was expecting the problem is solved. I did not restored System and Boot and all apps works just fine. Even though i miss some settings i made now i'm happy to be 90% back to origin ^^
Well alright, your solution will probably help other people in your situation. I presume your porblem is solved, if so you can add [SOLVED] in your first post in the title.
lennon123 said:
Well alright, your solution will probably help other people in your situation. I presume your porblem is solved, if so you can add [SOLVED] in your first post in the title.
Click to expand...
Click to collapse
Yes, it's solved I'll mod the title
I have a problem with my TWRP (3.2.0-0) backups on my le1 pro (us model).
I'm on Cuoco92's ROM 5.5.014S. I saw BetaHydri's CM12.1 and wanted to try it.
First I made in TWRP a backup of my current Cuoco92 ROM. Then I installed CM12.1, gapps and the phone booted, and played a little with it.
I made a TWRP backup of this CM12.1 so I can get back to it and test it later.
I restored the backed up Cuoco92 ROM.
Later I got back into TWRP to restore CM12.1 and after a successful restore and reboot the phone gets stuck on LeEco logo. I tried to wipe/factory reset but without success.
Fortunately the backups of Cuoco92 ROM get restored without problem and the phone boots normally.
Does anyone know what could be the problem? Why do I get stauck on LeEco logo when I restore the CM12.1 backup but not when I restore the Cuoco92 backup?
I got same problem, in my case I wanted to restore the stock Rom but the phone restart to TWRP before restore ends then I tried to restore the CM12.1 backup, I stuck on LeEco logo.
Luckily, after many reboots, the original recovery restored (I don't know how) and I could flash the 11s clean again.
Really its a weird phone!
Hello
Need some help figuring out how to go back to stock.
I have already downloaded the latest TWRP backup and recovery for my CID (621). Used 1.92.709.1 version by @topjohnwu.
I put it into the TWRP Backup folder and restored it. Now phone bootloops when I turn it on.
The question is: what am I doing wrong?
(I was running LeeDroid 4.00 Nougat ROM on the moment I decided to go back to stock)
I had the same problem yesterday when I was trying to revert to stock my self.
Turned out I had forgot to format (Did a wipe instead) the data partition and the now un-decryptable encryption was messing up the boot process.
Rebooted into twrp and formated (Not wiped) the data partition -wich also removes the encryption- and it booted normally.
I still had some other issues though, think it's because I was recovering from a sort-off allready messed up backup I guess, so I ended up flashing back the stock recovery and did an RUU update to the most recent stock nougat from SD instead. As a bonus I was able to do a Oreo OTA the moment it booted the forst time.
Elegiacal said:
Hello
Need some help figuring out how to go back to stock.
I have already downloaded the latest TWRP backup and recovery for my CID (621). Used 1.92.709.1 version by @topjohnwu.
I put it into the TWRP Backup folder and restored it. Now phone bootloops when I turn it on.
The question is: what am I doing wrong?
(I was running LeeDroid 4.00 Nougat ROM on the moment I decided to go back to stock)
Click to expand...
Click to collapse
Is your firmware newer than 1.92.709.1? If so you'll either need a newer backup that matches your firmware version or an RUU.zip that is the same or newer than you current firmware version.
What made you want to go back?
Briefly as I can, I switched from Treskmod (based on Omni) so I could try out nolimits rom. I decided to go back to Treskmod some time later so I flashed my backup.
Treskmod appeared to be up and running accept there was no sound in the music and no sound in YT (also video appeared really laggy.
I had an older backup so I tried that with the same exact results.
I do think this has to do with the OS Firmware needing to be flashed. When Treskmod booted up I notice it skipped the screen with the 1+ logo and went right to the rom boot animation.
My question, if that is indeed the case, is how do I do that? Flash OP Firmware, reboot recovery THEN restore my backup?
I just don't understand why it needs to be flashed before restoring my backup since both Treskmod and nolimits have OS Firmware built-in.
Thanks
KLit75 said:
Briefly as I can, I switched from Treskmod (based on Omni) so I could try out nolimits rom. I decided to go back to Treskmod some time later so I flashed my backup.
Treskmod appeared to be up and running accept there was no sound in the music and no sound in YT (also video appeared really laggy.
I had an older backup so I tried that with the same exact results.
I do think this has to do with the OS Firmware needing to be flashed. When Treskmod booted up I notice it skipped the screen with the 1+ logo and went right to the rom boot animation.
My question, if that is indeed the case, is how do I do that? Flash OP Firmware, reboot recovery THEN restore my backup?
I just don't understand why it needs to be flashed before restoring my backup since both Treskmod and nolimits have OS Firmware built-in.
Thanks
Click to expand...
Click to collapse
All you need to do is flash ROM, custom kernel if you have one and noverity if you're decrypted. To fix this issues I'd recommend backing up all your apps through swift backup and clean flash the ROM and restore your apps through swift backup after installing from the play store.
DEVILOPS 007 said:
All you need to do is flash ROM, custom kernel if you have one and noverity if you're decrypted. To fix this issues I'd recommend backing up all your apps through swift backup and clean flash the ROM and restore your apps through swift backup after installing from the play store.
Click to expand...
Click to collapse
I know how to flash a rom and restore data. My question is why are none of my nandroid backups restoring when coming from nolimits? I'm certain it has to do with needing the proper oos firmware (because of missing 1+ boot logo) BUT my backup of treskmod should already have the correct firmware baked in. So I'm not sure.
Yes. Getting Treskmod up & running again is easy, but if you like to try different roms, being able to quickly restore a backup is important or at least very convenient.
Hi all, I'm currently running miui EU rom 11.0.11 with bootloader unlocked and TWRP installed. However there are so many different twrp recoveries available all with different things working....
So far I've only flashed one rom since I've got the phone but with all these amazing looking custom ROMs around, I'd like to try out a few but it seems backup and restore is currently not possible.
TLDR: anyone know of a TWRP with working backup for Xiaomi redmi note 9s CURTANA?
Cheers
1qazwsx4 said:
Hi all, I'm currently running miui EU rom 11.0.11 with bootloader unlocked and TWRP installed. However there are so many different twrp recoveries available all with different things working....
So far I've only flashed one rom since I've got the phone but with all these amazing looking custom ROMs around, I'd like to try out a few but it seems backup and restore is currently not possible.
TLDR: anyone know of a TWRP with working backup for Xiaomi redmi note 9s CURTANA?
Cheers
Click to expand...
Click to collapse
You should use the latest recovery version available, I think now is the OrangeFox recovery, it's the unified (miatoll) version. To can make backup, the recovery need to able to handle the encryption installed by ROM. To restore the backup... another challenge. I using only data backup and when want to restore, I wipe data, flash the rom, wait for first boot (set same pin code as used in backup), than restore the data in recovery. In case of unlucky situation (encryption difference between "restored" and previous rom, the rom stuck at first boot and need to format data partition (will delete internal storage too!!).
I use ofox recovery, having stock rom in an sd card and migrate backup I just flash new rom and when I want to come back, I flash stock and restore migrate. Nandroid backups are a bit risky I think.