Some of you know me from the OOS3 kernel I built, and now I am moving to Nougat and starting working on it.
It mainly majors in keeping a balance between features and stabilities, so I did not add too many features (And I think features like adding 10+ governors is a bad practice), but the features I added is of great use. Some of the features are unique in existing OP2 kernels.
I am sick of those kernels which say it is the smoother than butter or is more powersaving than Nokia 1100, and I do not think that could happen. What I provide is an average kernel with some little tweaks. If you are looking for some specific features, this is not the place for you.
The features list:
Features:
- Catch up with latest Linux upstream 3.10.107
- Catch up with latest CAF source
- Catch up with latest sdcardfs, f2fs, exfat, xpad source
- Add flash and electron governor (both based on interactive, credits to The Flash and frap129)
- Tweaked interactive governor based on CAF MSM8996 branch
- CPU voltage control (The first for MSM8994?)
- Replace H-cube with core_ctl from CAF MSM8996 branch
- Remove powersave, conservative governor
- Add maple, sio, fiops, zen I/O scheduler
- Partly Faux sound control
- Partly thermal control
- KCAL
- Dynamic Sync control
- Wakeblock toggle
- Fingerprint boost tweaks
- Sultanxda's I/O switcher
- TheCrazyLex's memory automatic compaction mechanism
- Various improvements from AOSPA (thanks to TheCrazyLex)
- Various improvements from Sultanxda and myfluxi (The people I really admire)
- Various improvements from CAF
- Fix some ROM's ramdisk bug (why should I fix these?)
- ...
Usages:
Note that LineageOS based roms and other roms use different sysfs nodes for gestures. So I provide 3 versions, just use the one that your rom is based on, otherwise gestures may be broken. For non los based Roms, use other version, if it does not work (such as Pure Nexus), use pn version.
Use kernel adiutor to tweak it.
Source:
https://github.com/aviraxp/ONEPLUS_MSM8994_KAWORI
Credits:
Fist of all, thanks to Linux upstream and CAF. Without them, doing this work is impossible.
Of course, thanks to Lord Boeffla for a good picking source.
Then I want to thank to Sultanxda and myfluxi for the 30+ commits I picked and the guidance he provided. You are the real MVP!
I also want to say thanks to dorimanx, Joe Maples and Franco for the good features they provided.
Support:
Just like many other so-called "developers" for OP2, I do not major in computer science and know little about C. All my codes are written by guessing. Feel free to provide feedbacks, though I may not know how to fix it.
reserved
Nice to see new kernels popping up for the device. Good work @aviraxp
MZO said:
Nice to see new kernels popping up for the device. Good work @aviraxp
Click to expand...
Click to collapse
I am using your Purenexus
aviraxp said:
I am using your Purenexus
Click to expand...
Click to collapse
That's awesome ?
thanks for kernel. have you tested undervolting? is it safe? whats basic rules to use voltage control without killing phone? never used this feature
chxei said:
thanks for kernel. have you tested undervolting? is it safe? whats basic rules to use voltage control without killing phone? never used this feature
Click to expand...
Click to collapse
Phone should technically reboot and discard changes before any damage occurs
Sorry if I missed it.. Is this kernel compatible with official lineage weekly?
Sent from my ONEPLUS A3003 using Tapatalk
chxei said:
thanks for kernel. have you tested undervolting? is it safe? whats basic rules to use voltage control without killing phone? never used this feature
Click to expand...
Click to collapse
I have tested, and think undercoating about 80mV is fine. Lower voltage will make it reboot.
infatality said:
Sorry if I missed it.. Is this kernel compatible with official lineage weekly?
Click to expand...
Click to collapse
Of course
r2 will be soon uploaded , thanks to @MZO for pointing out a different implementation of gestures that I missed.
First of all: nice to see a new kernel of OP2, and I love new features! Good work!
Second: Unfortunatly, flashing this kernel for me kills WiFi on latest Unofficial RR. Had to flash stock boot.img to make it work again. Other than that it seems to work fine.
Defineatly gonna give it a try as my daily driver after WiFi issue is gone.
chxei said:
thanks for kernel. have you tested undervolting? is it safe? whats basic rules to use voltage control without killing phone? never used this feature
Click to expand...
Click to collapse
No problems for the hardware with undervolting but the system may become a bit unstable
almlex said:
First of all: nice to see a new kernel of OP2, and I love new features! Good work!
Second: Unfortunatly, flashing this kernel for me kills WiFi on latest Unofficial RR. Had to flash stock boot.img to make it work again. Other than that it seems to work fine.
Defineatly gonna give it a try as my daily driver after WiFi issue is gone.
Click to expand...
Click to collapse
I have tested my kernel on omni, du, aex and pn, no issues so far. Some lineage guys also flashed and encounter no issues. But I will try to look at it.
Using this kernel for Almost 12hrs, so far everthing working here with decent battery life.
Cpu cores implementation is the same as in Franco kernel (all cores always online) or different from it?
almlex said:
First of all: nice to see a new kernel of OP2, and I love new features! Good work!
Second: Unfortunatly, flashing this kernel for me kills WiFi on latest Unofficial RR. Had to flash stock boot.img to make it work again. Other than that it seems to work fine.
Defineatly gonna give it a try as my daily driver after WiFi issue is gone.
Click to expand...
Click to collapse
Could you please flash boeffla kernel and report if it works? I suspect it is a toolchain issue.
parasthakur37 said:
Cpu cores implementation is the same as in Franco kernel (all cores always online) or different from it?
Click to expand...
Click to collapse
Different. It is actually same as stock, just built in kernel to keep stability.
aviraxp said:
Different. It is actually same as stock, just built in kernel to keep stability.
Click to expand...
Click to collapse
And I suppose there's no way we can use franco's implementation if we wanted to?
parasthakur37 said:
And I suppose there's no way we can use franco's implementation if we wanted to?
Click to expand...
Click to collapse
I don't know what Franco's implementation is. I don't care either. If you want to keep all cores on, use kernel adiutor and change the min cpus to 4.
Related
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi all,
some of you know me from the Samsung devices area, where I provide my kernels already for more than two years to Galaxy S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod / CyanogenOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
1) When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
2) Do NOT use TWRP's function to root your device after a clean rom flash!!! The installed supersu version is not up to date and may cause a bootloop with latest COS/CMs kernels !!!
3) Make sure you flash the correct kernel version, depending on whether you use cm11s stock or genuine cm11, COS13.0, COS12.1, COS12.1.1 or genuine CM13 !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Saying that, the Boeffla-Sound app in Play Store is not designed to work on the OPO, neither was it developed by me, hence it will never work on the OPO ever. Boeffla-Config is the way to go here !!!
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app.
Click here to learn about using the config app.
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
Change logs can be found at the first page of the kernel homepage:
www.boeffla.de
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Features
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Additional governors: zzmoove, intelliactive, intellidemand, wheatley, smartmax, slim, intellimm, pegasusq, nightmare, lionheart
Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Notification LED control (fading, speed, brightness)
Boeffla-Sound engine (Headphones and speaker volume configurable)
zRam (1-4 logical devices)
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency configurable, touch boost switch
Swipe2Wake gesture implemented
Swipe2Sleep - 3 gestures implemented
Boeffla generic wakelock blocker V1.1.0 (documentation)
CPU Overclocking up to 2.88 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support with fixed simple_ondemand
Show GPU frequency usage per frequency in Boeffla-Config
Panel partial updates reverted to avoid graphical glitches
Last CM12 touchscreen firmware reverted as it does not work properly for some users
Color control to adjust RGB color space + inverted mode
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported (default is off, new Mattiadj tweak set included)
Android logger (logcat) configurable (depending on rom)
Kernel logger (dmesg) configurable
Charge rates for AC charger and USB charging separately configurable (set charge rate to 0 to have stock charge logic back)
Charge information display support via Boeffla-Config V2 app
CIFS support (module, do not mount inside /data)
NFS support (module)
exFat opensource support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
Module support in general activated in Kernel
TCP Congestion changed to Westwood
Swap supported (but not recommended, use zRam instead)
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Insecure kernel (adb has root privileges)
Automatic EFS backup
Kernel survival mode by Boeffla-Config app to survive CM rom flashes (not CMs however)
Full support for mpdecision for best compatibility and smoothness (no min cpu frequency reset, use Boeffla-Config to configure min frequencies only)
Integrated full busybox 1.23.1 (own compilation)
Auto-Root by kernel possible by request (latest su included)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Kexec hardboot supported
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Google gcc 4.8 toolchain used for best stability
Always using latest Initramfs
Always based on latest OnePlus One kernel sources
Note: I do NOT upstream the kernel to higher Linux kernel versions anymore as this usually has zero benefit but likely introduces new issues + is a waste of effort in the end
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are on stock cm11s or genuine cm11 !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.1.48 or higher for the OnePlus One Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change logs:
CM14.1
http://kernel.boeffla.de/bacon/boeffla-kernel-cm/cm14.0/changelog.htm
CM13
http://kernel.boeffla.de/bacon/boeffla-kernel-cm/cm13.0/changelog.htm
COS13.1
http://kernel.boeffla.de/bacon/boeffla-kernel-cms/cm13.1s1/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-one/general/unofficial-boeffla-kernel-profile-t2998145
--- reserved 2 ---
Yes a new Kernel. Can never have too much Kernel love for the OPO. WIll check it out ASAP. Thank you sir!
Omgggg i loved your kernel from s3, can you port zzzmove?
Sent from a OnePlus One with Vanir ROM and AK
_Beni_ said:
Omgggg i loved your kernel from s3, can you port zzzmove?
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
Hi,
oh yes, zzmoove is already in
Thanks to master @ZaneZam, who was working together with me in the past 2 weeks on that topic.
If you loved my kernel already on the S3, you will even love you have the same kind of "structure" around the kernel. Same config app, same comfort functions there etc etc.
So, ... enjoy
Andi
waaaaaa... my lord.... welcome .... missed u from S3....... so happy...
are we expecting eargasm again ???
Lol, how nice... many "old S3 chaps" here. Good to see you again guys
Andi
Lord Boeffla said:
Hi,
oh yes, zzmoove is already in
Thanks to master @ZaneZam, who was working together with me in the past 2 weeks on that topic.
If you loved my kernel already on the S3, you will even love you have the same kind of "structure" around the kernel. Same config app, same comfort functions there etc etc.
So, ... enjoy
Andi
Click to expand...
Click to collapse
Nice , are you going to port it to cm11?
Sent from a OnePlus One with Vanir ROM and AK
_Beni_ said:
Nice , are you going to port it to cm11?
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
Not in my plans as I have only one device. So the same goes as long time ago for the S3 and n8000.
One device = only the "official" firmware. This is still my golden rule of thumb
If enough people help me to get a second device, it would change of course.
Andi
Lord Boeffla said:
Not in my plans as I have only one device. So the same goes as long time ago for the S3 and n8000.
One device = only the "official" firmware. This is still my golden rule of thumb
If enough people help me to get a second device, it would change of course.
Andi
Click to expand...
Click to collapse
I have invites, i can give you one if you want to buy a second device. Why you dont switch to other roms? You dont lose warranty
Sent from a OnePlus One with Vanir ROM and AK
welcome, it's nice to find you. now we will see some good!
_Beni_ said:
I have invites, i can give you one if you want to buy a second device. Why you dont switch to other roms? You dont lose warranty
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
I know.
But I loose features, and like for a daily driver phone to stay on the official firmware the vendor provides. That is my concept for more than 3 years now and I was always good with it.
So, no intention to change.
The question from other side is (although it is OT): What does CM provide me which CM11s does not have?
I am not missing anything, thats my point
It is not about invites, but paying another 300 bucks is not possible for me this year anymore (spent around 15 k€ for relocations, my car got stolen in February and so on... was an expensive year for me).
Andi
Lord Boeffla said:
I know.
But I loose features, and like for a daily driver phone to stay on the official firmware the vendor provides. That is my concept for more than 3 years now and I was always good with it.
So, no intention to change.
The question from other side is (although it is OT): What does CM provide me which CM11s does not have?
I am not missing anything, thats my point
It is not about invites, but paying another 300 bucks is not possible for me this year anymore (spent around 15 k€ for relocations, my car got stolen in February and so on... was an expensive year for me).
Andi
Click to expand...
Click to collapse
damn... sorry to hear that..
reyscott1968 said:
damn... sorry to hear that..
Click to expand...
Click to collapse
Well, no worries.
Sometimes life is a b**tch
But all good now. Just not the money left for another OPO at the moment.
Especially as I still am not sure whether I should also get a Galaxy S5 on day.
Andi
Lord Boeffla said:
Well, no worries.
Sometimes life is a b**tch
But all good now. Just not the money left for another OPO at the moment.
Especially as I still am not sure whether I should also get a Galaxy S5 on day.
Andi
Click to expand...
Click to collapse
Lets leave samsung , they dont want good thirdparty developers.
Now downloading stock opo image, never used the orgininal cm11s . Everyfeature from s3 is also in Opo kernel?
Sent from a OnePlus One with Vanir ROM and AK
_Beni_ said:
Everyfeature from s3 is also in Opo kernel?
Sent from a OnePlus One with Vanir ROM and AK
Click to expand...
Click to collapse
No, of course not.
This is technically impossible. There are things in Samsung that do not exist on this hardware (e.g. big parts of boeffla-sound).
And vice versa.
And some are not needed as they are included here by default (e.g. touch wake etc).
If you look carefully at the feature list, you can spot the differences
Andi
Pretty sure you can get the kernel to work with AnyKernel, but of course, when you do this, YMMV. Since it's designed to work best with CM11s, it might perform worse on other ROMs (and then there comes the complaints, bugs, issues, etc.). Besides, I don't see any need for any other ROMs than CM11s. It gives you everything you need.
ive used that kernel until last week on my s3, it was by far the best.
(boeffla sound was great)
hoping for a cm11 version sooner or later for the 1+1 :victory:
I have used your kernel on my s3 for along time, it's awesome! Very happy to see your work on OPO.
Just ask one question, I'm using f2fs with ak kernel on my OPO now, so does this kernel support f2fs filesystem? Cuz i didn't find it on your feature list..
sorry for my english
Probably none of you knows me, but I have been developing Xposed modules which have 50 thousand+ downloads for quite long time. At the same time, I have been using OOS3 for its stability since last year. Although Boeffla kernel is a very good kernel, because of Oneplus's lack of careness, it has been missing a lot of security patches and improvements. At the same time, I want to improve and tweak Boeffla kernel a bit to fit my needs. So two weeks ago I started making this kernel based on Lord Boeffla's work and I think it is the time to share with you now.
It mainly majors in improving security and fixing issues, so I did not add too many features (And I think features like adding 10+ governors is a bad practice), but the features I added is of great use. Some of the features are unique in existing OP2 kernels.
I am sick of those kernels which say it is the smoother than butter or is more powersaving than Nokia 1100, and I do not think that could happen. What I provide is an average kernel with some little tweaks. If you are looking for some specific features, this is not the place for you.
The feature changes from original Boeffla kernel (Most changes are security patches):
Features:
- No feature is removed, 100% suitable for Boeffla config app;
- Add blu-active governor (thanks to engstk)
- Many charging tweaks
- Enable Arch power and gentle fair sleepers toggle (though I do not recommend toggling them)
- Add wakelocks toggle (thanks to Franco)
- Set I/O scheduler to noop after turning off screen in 60s to save idle power (thanks to Sultanxda)
- Various fingerprint speedups and haptic cleanups (thanks to Sultanxda and cyanogen)
- Lots of security improvements (thanks to CAF and Linux Upstream)
- Many many more...
Usages:
Flash the zip provided, then you can configure the parameters with Boeffla config app (may lack bunch of features) or my self-built kernel adiutor (the play store one will be lack of features). For keeping consistent with Boeffla config app, I implement some features to kernel adiutor, only screen gestures and sound configurations are left now) You can use them both too, but you need to enable "override" settings in Boeffla config app.
Source:
https://github.com/aviraxp/Oneplus2_OOS3_Boeffla_Kernel_Unofficial_Enhanced
Credits:
Fist of all, thanks to Linux upstream and CAF. Without them, doing this work is impossible.
Of course, thanks to Lord Boeffla for providing a good kernel!
Then I want to thank to Sultanxda for the 30+ commits I picked and the guidance he provided. You are the real MVP!
I also want to say thanks to dorimanx, Joe Maple, myfluxi, Franco and engstk for the good features they provided.
Downloads:
See attachments.
Update log:
r4:
- Merge many security patches
- General small "optimizations"
r3:
- Speed up fingerprint by boosting cores (save about 100ms, thanks to Sultanxda and Joe Maple)
- Relax charging temperature threshold and hack OEM logic to improve charging speed (thanks to myself)
- Remove temperature polling and tweak DSI check interrupts to reduce CPU overload (thanks to Sultanxda)
- 10+ security patches
r2:
- Boost DDR bus after turning on screen (thanks to Sultanxda)
- 20+ security patches
- Add relaxed governor and maple I/O scheduler (thanks to Joe Maple)
reserved 2
wow boeffla with wakelockes, arch and gentle fair sleepers. this is perfection ^_^ but wait, is this for oos?
chxei said:
wow boeffla with wakelockes, arch and gentle fair sleepers. this is perfection ^_^ but wait, is this for oos?
Click to expand...
Click to collapse
I think the attached filename shows it is for OOS
Is wakelock toggles available in Boeffla Config?
yousuf.shareef said:
Is wakelock toggles available in Boeffla Config?
Click to expand...
Click to collapse
Of course not. BOEFFLA config app is not open source, I cannot modify it.
which wakelock i have to disable to save power?
dom_tucc said:
which wakelock i have to disable to save power?
Click to expand...
Click to collapse
I do not recommend block them. I think blocking them is a no-op.
Seriously please be original.
How many boeffla kernel clones do we need :silly:
anupritaisno1 said:
Seriously please be original.
How many boeffla kernel clones do we need :silly:
Click to expand...
Click to collapse
I did this just for myself, it is based on Boeffla because I used to use it. I just put it here in case others need it. Also, my kernel has some original thing that none of other OP2 kernels have.
Can I use this with resurrection remix?
Rebel7022 said:
Can I use this with resurrection remix?
Click to expand...
Click to collapse
The file name tells it is a OOS kernel.
aviraxp said:
The file name tells it is a OOS kernel.
Click to expand...
Click to collapse
do you plan to make kernel for los/aosp
In case somebody wants to see the wake lock and idle time.
aviraxp said:
In case somebody wants to see the wake lock and idle time.
Click to expand...
Click to collapse
Please share your profile settings in the kernel.
Update is there. I picked many things from Sultan, who is one of a few kernel developers I really admire. I believe my kernel is the best now.
kostin said:
Please share your profile settings in the kernel.
Click to expand...
Click to collapse
Stock.
New Build is up.
Hi,
When I first flashed the kernel, it was fantastic like the fingerprint speed is crazy fast, but then randomly my phone will reboot and then keep rebooting straight after it reboots. It's not a boot loop because it does boot up, it's just that around 20 seconds of being on the os, it reboots again. What can I do to avoid this?
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus 3T, 3, 2, One and X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official LineageOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Important notes
Read first, especially when you are new to my kernels:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/troubleshooting
http://boeffla.de/index.php/support/support
Boeffla-Kernel uses the anykernel concept = Flash stock kernel of rom first (by just flashing LineageOS rom dirty over first)!
This kernel is ONLY compatible to LineageOS stock, nothing else !!!
If you are using a custom rom that bases on LineageOS, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is LineageOS stock.
It is not supposed to be compatible to OxygenOS, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation).
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting change log...)
Change log for LineageOS 14 kernel - Click here
Known issues
none known
Features
Note: This kernel only runs on LineageOS for the OnePlus 5 - nothing else !!!
Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.54 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: zzmoove, blu_active, impulse, cultivation
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
Underclocking CPU and GPU supported
No CPU and GPU overclocking (turned out to be slightly instable)
No CPU and GPU voltage interfaces (not planned too)
GPU boost implemented (4 levels)
CPU core profiles to restrict number of CPU cores being used (the OP5 does not hotplug based on load)
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS read-only support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys locked as long as screen is in use (touched) for better usability (default, but configurable)
Swap supported
Various kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.1 (own compilation)
Safetynet: verifiedbootstate + additional flags removed
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest LineageOS kernel sources (https://github.com/LineageOS/android_kernel_oneplus_msm8998)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app Boeffla-Config V2 from the downloads section on www.boeffla.de.
You need at least version 2.4.54 or higher for the OnePlus 5 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* flar2
* arter97
* Grarak
* Entropy512
* Faux
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
LineageOS 14.1
http://kernel.boeffla.de/oneplus5/boeffla-kernel-cm/cm14.0/changelog.htm
--- Reserved 2 ---
Here we go - Kernel is released now. Thread open.
Let the fun begin
Andi
One more reason to flash lineageos
Sent from my ONEPLUS A5000 using XDA-Developers Legacy app
Does this one include the minimum brightness setting? It's the one thing I demand from kernels now
Sent from my OnePlus 5
fjsferreira said:
Does this one include the minimum brightness setting? It's the one thing I demand from kernels now
Sent from my OnePlus 5
Click to expand...
Click to collapse
Mmmm.
Quoting the change log:
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Click to expand...
Click to collapse
So... yes.
Andi
Sorry, didn't catch that. You know you're the only one having this feature that fixes the stupid default autobrightness levels, don't you? You should make it donation only as no one else is doing it
Sent from my OnePlus 5
just landed in boeffla los kernel! Thanks!
finally finally ....on my way Andy <3
fjsferreira said:
Sorry, didn't catch that. You know you're the only one having this feature that fixes the stupid default autobrightness levels, don't you? You should make it donation only as no one else is doing it
Sent from my OnePlus 5
Click to expand...
Click to collapse
Hehehe. Nice idea, but I am not here to make real money. It is ok, all the important functionality is and will always be free in my app.
Thanks
Andi
Hi all,
new Boeffla-Kernel version for LineageOS is out.
Version 1.0-beta2
04.09.2017
Update: Updated with latest official LineageOS kernel commits as of 04.09.17, 08.00 CET
[FONT="]Update: Boeffla generic wakelock blocker updated to version 1.1.0 - read the [/FONT]documentation on Boeffla homepage
(Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)
Enjoy
Andi
Lord Boeffla said:
Hi all,
new Boeffla-Kernel version for LineageOS is out.
Version 1.0-beta2
04.09.2017
Update: Updated with latest official LineageOS kernel commits as of 04.09.17, 08.00 CET
Update: Boeffla generic wakelock blocker updated to version 1.1.0 - read thedocumentation on Boeffla homepage
(Note - the following wakelocks are blocked by default already: qcom_rx_wakelock, wlan, wlan_wow_wl, wlan_extscan_wl, netmgr_wl and NETLINK)
Enjoy
Andi
Click to expand...
Click to collapse
Wow thanks for this I was waiting for that !! So far so good great with many many options !!
Regards thanks for your hard work Lord boeffla ?
Hi Lord, ur kernel is amazing. Nice work
Bug on RR Remix Unofficial Version ( with OOS cam )
Wanted to Point out that the kernel is working there fine but it has a big bug, because the oos cam is working there and is preinstalled, ist buging the camera app so the app always Closes itself after 5 seconds, noticed this only with this kernel ( tried also the original kernel that installs with the Rom and franco kernel, on both ist working normaly )
Hope you can fix this please so i can use your kernel again.
BFMSAND said:
Wanted to Point out that the kernel is working there fine but it has a big bug, because the oos cam is working there and is preinstalled, ist buging the camera app so the app always Closes itself after 5 seconds, noticed this only with this kernel ( tried also the original kernel that installs with the Rom and franco kernel, on both ist working normaly )
Hope you can fix this please so i can use your kernel again.
Click to expand...
Click to collapse
Nope, this is not a bug. Not a big or a small one.
This is you having not read the OP.
My kernel is for LineageOS, not for any other roms... especially not RR. So if you face issues on RR, no surprise.
If you want to use RR, you have to use a different kernel.
Funny it is not even an official rom but something unofficial... so you really claim my kernel would have a bug. Funny.
Andi
Lord Boeffla said:
Nope, this is not a bug. Not a big or a small one.
This is you having not read the OP.
My kernel is for LineageOS, not for any other roms... especially not RR. So if you face issues on RR, no surprise.
If you want to use RR, you have to use a different kernel.
Funny it is not even an official rom but something unofficial... so you really claim my kernel would have a bug. Funny.
Andi
Click to expand...
Click to collapse
Ah Ok, i know that RR in this case is Special but i just thought to myself cause the current Versions of RR (both Official and Unofficial) are using LineageOS as base, so ist working there, that was the only Thing that not worked and that i noticed, so for me it was a bug, didnt want to offend you with that.
Just asked if you maybe can look in to this if this is possible as the rest is working fine and pretty good with your kernel.
Also a big thanks for your whole Support, i just recently changed to this phone from the oneplus one, and i used your kernel up from my first Samsung s3 up to the current op5.
BFMSAND said:
Ah Ok, i know that RR in this case is Special but i just thought to myself cause the current Versions of RR (both Official and Unofficial) are using LineageOS as base, so ist working there, that was the only Thing that not worked and that i noticed, so for me it was a bug, didnt want to offend you with that.
Just asked if you maybe can look in to this if this is possible as the rest is working fine and pretty good with your kernel.
Also a big thanks for your whole Support, i just recently changed to this phone from the oneplus one, and i used your kernel up from my first Samsung s3 up to the current op5.
Click to expand...
Click to collapse
This would most probably require a special change in the kernel, which is RR specific.
I am sorry, but I will not do that as it violates my objectives.
Also I would never install RR myself, so I could not even do it for analysis.
Sorry, no fun.
Andi
@Lord Boeffla Thanks for this great kernel, Lineage updated the kernel source again.
https://github.com/LineageOS/android_kernel_oneplus_msm8998/commits/cm-14.1
katinatez said:
@Lord Boeffla Thanks for this great kernel, Lineage updated the kernel source again.
https://github.com/LineageOS/android_kernel_oneplus_msm8998/commits/cm-14.1
Click to expand...
Click to collapse
Thanks my friend. Already merged.
I expect to ship an updated kernel out soon... just waiting for the latest nightly which is due today.
Andi
Hey there! Ayush Here!
INTRO
After a lot of hard work, I have a new custom kernel.
As the name suggest, these kernel is made as a All-Rounder, i.e it can provide better battery + performance . Without talking much lets go the features of these kernel.
MAIN FEATURES
Latest Linux Base 3.18.101
Overclocked CPU to 2.354 GHz (for Beast Performance).{Modified and Enhanced by me)
Support for more Governers { Impulse, Chill,relaxed, interactive modifed}
System wide PowerEfficent Workqueue (for Beast Battery Backup).
CPU input Boost.
Reduced CPU Load (for Beast Battery Backup).
Fixed High Load average (for Beast Battery Backup).
Fast idling of CPU (for Beast Battery Backup).
Less CPU-Load=Cool Device=More Battery-Life
Various Optimizations.
Add Lazyplug (Modified for Beast Battery Backup)
Overclock GPU to 652MHz(for Beast Performance)
Support for Adreno Boost
Enabled ARCH_Power (for Beast Battery Backup)
New PowerSuspend algorithm (for Beast Battery Backup)
Support for preventing unnecessary WakeLocks (for Beast Battery Backup)
Fast Charge Drivers.
Relaxed thermal threshlods for faster charging.
Support for mic, earpiece gain
Kcal Colour control v2
Uses custom colour profile by default for better screen vibrancy, colour reproduction.
Compiled with Clang
O3 Optimizations
Software CRC toggle
State Notifier support.
Various tweaks for better network speed
Support for Dynamic Fsync
Various Optimiztaions For Cpu and GPU
Various Tweaks for better battery+performance.
Fixed Deep sleep issues
Added LCD notifier
Added Quick Wakeup driver
Power Optimization.
These are the features which I remember, Many features are omitted due to word limit.
Check git for more.
I have tried my level best to make my kernel as best as possible. From minor tweaks to major improvements, everything is done.
Installation Instructions
Boot into recovery.
Wipe cache and dalvik cache
Flash Kernel
Reboot to system
Done
Downloads
R6
TREBLE :- https://www.androidfilehost.com/?fid=818070582850502954
NON-TREBLE
new trees :- (For roms which didnt got treble right now)
https://www.androidfilehost.com/?fid=890129502657593208
old trees :- (For roms by Mahek and some nougat roms)
https://www.androidfilehost.com/?fid=818070582850502955
Newtrees :- for roms based on tree of @dd3boh eg. Lineage OS, Cosmic, Aosip, PE, Aex etc.
Old Trees :- for roms based on tree of @Mr.hacker5476 eg Omni, validus, du
Click to expand...
Click to collapse
Kernel-Adiutor-Mod :- https://androidfilehost.com/?fid=818070582850490285
XDA:DevDB Information
*AR_Beast* Kernel, Kernel for the Lenovo ZUK Z2 (Plus)
Contributors
Ayush Rathore, faizauthar12, @dd3boh and all the commiters in source.
Source Code: https://github.com/AyushR1
Kernel Special Features: Fixed Deep Sleep, Faster Charging, OTG Fixed, Sound Control
Version Information
Status: Stable
Current Stable Version: 6
Stable Release Date: 2018-03-23
Created 2018-01-14
Last Updated 2020-04-20
Nougat or Oreo?
Reserved for review..
sanketp60 said:
Nougat or Oreo?
Click to expand...
Click to collapse
Only for oreo
I'm using it from its beta stages
Which build to download for validus latest?
Ans:- Old tree..
Check the post for The new trees section!
It dosent describe old trees
is deep sleep working？
Is it Working on stock oreo rom?
Thank god! The screen didnt flipped
Why no Ofast?) For Beast kernel size:laugh:
Also, Arch power is only harmful for modern SOCs. I recommend you disabling it and removing toddler for it.
Just flashed it with Cosmic OS
Pretty stable
Go for it!!!
Star_king12 said:
Why no Ofast?) For Beast kernel size:laugh:
Star_king12 said:
Why no Ofast?) For Beast kernel size:laugh:.
Click to expand...
Click to collapse
LOL. Post was copied will make corrections,
Star_king12 said:
Also, Arch power is only harmful for modern SOCs. I recommend you disabling it and removing toddler for it.
Click to expand...
Click to collapse
Ok. Will see thanks for suggestions.
Click to expand...
Click to collapse
Star_king12 said:
Why no Ofast?) For Beast kernel size:laugh:
Also, Arch power is only harmful for modern SOCs. I recommend you disabling it and removing toddler for it.
Click to expand...
Click to collapse
You have some serious mind issues.?
Star_king12 said:
Why no Ofast?) For Beast kernel size:laugh:
Also, Arch power is only harmful for modern SOCs. I recommend you disabling it and removing toddler for it.
Click to expand...
Click to collapse
Deleted
Ahh i remember that time i was fascinated with a lots of feature inside the kernel
Good job buddy :good:
Really great work mate i have a question regarding oc the little clusters can it be increased to 2.19 ghz like SD821 i know its more to ask just askin cuz the oc in your kernel feel snappy no issues so far
Ayush Rathore said:
LOL. Post was copied will make corrections,
Ok. Will see thanks for suggestions.
Click to expand...
Click to collapse
Also, you can make a unified version. Put fstab from dd3-s device tree in ramdisk folder of kernel zip and it will be booting on both device trees. (Worked for me, at least)
faizauthar12 said:
Ahh i remember that time i was fascinated with a lots of feature inside the kernel
Good job buddy :good:
Click to expand...
Click to collapse
Thanks buddy. Kernel based on your and @DD3Boh hardwork only.
Aka9413 said:
Really great work mate i have a question regarding oc the little clusters can it be increased to 2.19 ghz like SD821 i know its more to ask just askin cuz the oc in your kernel feel snappy no issues so far
Click to expand...
Click to collapse
Will be instable. Also i guess sd820 is powerful enough. No need of that.
Star_king12 said:
Also, you can make a unified version. Put fstab from dd3-s device tree in ramdisk folder of kernel zip and it will be booting on both device trees. (Worked for me, at least)
Click to expand...
Click to collapse
Thanks.
Damn how I forgot that:fingers-crossed:
Will do it. Thanks again
Awesome flashing it
Is the GPU OC being 652mhz added or it replacing 624mhz? because removing 624mhz would mess with AKT Profiles
---------- Post added at 11:02 PM ---------- Previous post was at 11:00 PM ----------
Ayush Rathore said:
Will be instable. Also i guess sd820 is powerful enough. No need of that.
Click to expand...
Click to collapse
I think SD820 is weak in terms of CPU power, as it only has 4 cores and in cpu heavy tasks like emulation it's really struggle. An overclock to at least match the sd821 would be great
Some of you know me from the OOS3/Nougat kernel I built, and now I am moving to Oreo and starting working on it.
It mainly majors in keeping a balance between features and stabilities, so I did not add too many features (And I think features like adding 10+ governors is a bad practice), but the features I added is of great use. Some of the features are unique in existing OP2 kernels.
I am sick of those kernels which say it is the smoother than butter or is more power-saving than Nokia 1100, and I do not think that could happen. What I provide is an average kernel with some little tweaks. If you are looking for some specific features, this is not the place for you.
The features list:
Features:
- Backport patches from Linux stable 3.18/3.16/3.2 branches
- Catch up with latest Linux upstream 3.10.108
- Catch up with latest CAF LA.BF64 branch source
- Catch up with latest sdcardfs, f2fs, exfat, xpad source
- Tweaked interactive governor based on CAF MSM8996/8998 branch, together with fastlane tunsables from Bluspark
- CPU voltage control
- Remove powersave, conservative, userspace governor
- Add maple, sio, fiops, zen I/O scheduler
- Franco sound control
- Thermal parameters control
- KCAL control
- Dynamic Sync control
- Boeffla wakeblock blocker
- Fingerprint boost tweaks
- Sultanxda's I/O sched switcher
- TheCrazyLex's memory automatic compaction mechanism
- Various improvements from AOSPA (thanks to TheCrazyLex)
- Various improvements from Sultanxda and myfluxi (The people I really admire)
- Various improvements from CAF
- ...
Usages:
Note that LineageOS based roms and other roms use different sysfs nodes for gestures. So I provide 2 versions, just use the one that your rom is based on, otherwise gestures may be broken. For non los based Roms, use nonlos version. If gesture does not work, switch to another version and it will work.
Use EX kernel manager to tweak it. You can use kernel adiutor, but you will miss some tunables as it is not updated for a long time.
Download:
I use Github to host the zips. You can view all the zips at https://github.com/aviraxp/kawori_build.
[Release 20180404]
LOS based roms: https://github.com/aviraxp/kawori_build/raw/master/kawori-kernel-20180404-los.recovery.zip
Non LOS based roms: https://github.com/aviraxp/kawori_build/raw/master/kawori-kernel-20180404-nonlos.recovery.zip
[Release 20180330]
LOS based roms: https://github.com/aviraxp/kawori_build/raw/master/kawori-kernel-20180330-los.recovery.zip
Non LOS based roms: https://github.com/aviraxp/kawori_build/raw/master/kawori-kernel-20180330-nonlos.recovery.zip
[Release 20180327]
LOS based roms: https://github.com/aviraxp/kawori_build/raw/master/kawori-kernel-20180327-los.recovery.zip
Non LOS based roms: https://github.com/aviraxp/kawori_build/raw/master/kawori-kernel-20180327-nonlos.recovery.zip
Source:
https://github.com/aviraxp/ONEPLUS_MSM8994_KAWORI
Credits:
Fist of all, thanks to Linux upstream and CAF. Without them, doing this work is impossible.
Of course, thanks to Lord Boeffla for a good picking source.
Then I want to thank to Sultanxda and myfluxi for the 30+ commits I picked and the guidance he provided. You are the real MVP!
I also want to say thanks to dorimanx, Joe Maples and Franco for the good features they provided.
Support:
Feel free to provide feedbacks, though I may not know how to fix it as I actually don't have enough knowledge for C.
2018-04-18: You can use nonlos build as usual, and the los version is compilatable with both stock or Shreesha's build.
Change log:
20180404:
Add adreno boost
Update fsync control to 2.1
Add security fixes from Lineage and angler
Remove iosched switcher (fixes kernel panic)
The los kernel is only for the newest official build, if you are on older build, don't use this one!
20180330:
Fix issues that big cores refuses to turn on
Attempt to fix charging for all (really weird because someone reports charging is fast but others report the opposite)
Improvements to BCL driver
Align with latest los code drop
Awesome!
So it doesn't support fast charge?
akashvshetty said:
So it doesn't support fast charge?
Click to expand...
Click to collapse
I don't know what you mean actually. Can you give me a reference? The AC charging current limit is 2000mA, and the USB charging current limit is 900mA. I don't think it can be quicker.
aviraxp said:
I don't know what you mean actually. Can you give me a reference? The AC charging current limit is 2000mA, and the USB charging current limit is 900mA. I don't think it can be quicker.
Click to expand...
Click to collapse
Sorry my fault . downloading it right away
aviraxp said:
I don't know what you mean actually. Can you give me a reference? The AC charging current limit is 2000mA, and the USB charging current limit is 900mA. I don't think it can be quicker.
Click to expand...
Click to collapse
But there must a different.
With stock AOSiP Kernel i got 1600mA
and with this Kernel only max 900mA AC charging rate
Edit:
I have been able to observe up to 1400 mA (for short time) also in kawori kernel.
(Most time its lower rate)
But it was generaly higher all time in the stock kernel, according to my observation.
fonfox said:
But there must a different.
With stock AOSiP Kernel i got 1600mA
and with this Kernel only max 900mA AC charging rate
Edit:
I have been able to observe up to 1400 mA (for short time) also in kawori kernel.
(Most time its lower rate)
But it was generaly higher all time in the stock kernel, according to my observation.
Click to expand...
Click to collapse
I can only say there is no difference in charging driver between aosip and this kernel. So sorry.
aviraxp said:
I can only say there is no difference in charging driver between aosip and this kernel. So sorry.
Click to expand...
Click to collapse
CPU frequency seems to stuck at 857mhz on small core and big core don't seems to be online. Clean Flash twice but still have the same issue.
Sent from my OnePlus 2 using XDA Labs
aviraxp said:
I can only say there is no difference in charging driver between aosip and this kernel. So sorry.
Click to expand...
Click to collapse
Yeah even I face those issues.
aviraxp said:
Use EX kernel manager to tweak it..
Click to expand...
Click to collapse
voltage control dont work
PAIIITET said:
voltage control dont work
Click to expand...
Click to collapse
This is really helpful and OP will be delighted by this statement without any kind of log.
jukyO said:
This is really helpful and OP will be delighted by this statement without any kind of log.
Click to expand...
Click to collapse
I know right! ?
jukyO said:
This is really helpful and OP will be delighted by this statement without any kind of log.
Click to expand...
Click to collapse
check yourself. load the log file. profit
kernel auditor too. last pixel
---------- Post added at 21:13 ---------- Previous post was at 21:12 ----------
super lag when closing the avatar in the WhatsApp
PAIIITET said:
check yourself. load the log file. profit
kernel auditor too. last pixel
---------- Post added at 21:13 ---------- Previous post was at 21:12 ----------
super lag when closing the avatar in the WhatsApp
Click to expand...
Click to collapse
I'm quite happy with stock setup of the kernel. Battery drains much slower then on original LOS by Shreesha.
Also, I'm pretty much confident that OP will resolve it at one point.
But, if I would report such problem, what is minimum effort to do, is to provide logs. Which is lacking in your case.
New build is out.
@aviraxp can we get srgb by any means? Or DCPI2 .
cpt.macp said:
@aviraxp can we get srgb by any means? Or DCPI2 .
Click to expand...
Click to collapse
Our JDI panel does not support it.
Very stable Kernel. Did you tweak the core voltages or Just Made them customizable?
Unfortunately the kernel keeps causing reboots on my OP2 running the LOS15.1 nightly.. I've set the max. freq of little at 1248MHz and big at 1440MHz.
Since logcat gets erased every reboot, which log should I dump to send to you?