Yes,its working...
REMOVE ALL OTHER ROOT...working or not befor installing magisk....may end with....something you dont want...
Maybe it would be best to start with a freshly factory resetted phone.... (anyway,to erase all errors in TWRP,youll format/data so... )
you need bootloader unlock... followed instructions HERE don't forget to OEM UNLOCK in /settings/Developer section on phone..(enable it while pressing repeatedly on Phone version (in ''about phone also in settings)
You need MINIMAL ADB on pc...HERE
You need TWRP recovery installed...HERE
but before doing all that...BE SHURE to have the original UPDATE.APP (firmware from huawei) somewhere on your pc
you will need the BOOT.img from your original firmware... (extract it from the update.app (update.zip for huawei firmware)
HERE
extract the boot.img somewhere on your pc... like on your desktop...
then,youll need 2 magisk things...
the LATEST magisk ZIP file...
and the LATEST MAGISK APK...
FOLLOW THESE INSTRUCTIONS (from Magisk post...i did it and its working :silly: )
Installation Instructions
If you already have Magisk installed, you can directly upgrade through Magisk Manager
For installing Magisk the first time
Make sure to remove any other root, best to restore your boot image back to stock
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
the ADB method is the best...
after reboot,in magisk app,youre supposed to be GREEN checked....
after that,if all green,you can FIX that DATA problem in TWRP...saying cant mount or blablabla...
DO a backup cuz yess,youll loose everything... Hisuite for your apps
in twrp, FORMAT DATA... ...wipe data factory reset...re install your things then,youll be able to do recoverys ect. in twrp
dont forget to RE INSTALL magisk APK after formatting and factory reset
IT WILL take some time TO BOOT... so let it do its thing...
Now about magisk modules...all of them ive tried ended in (blablabla not a magisk module)...
no big deal....just dload the zip and look for the app or file in it... and apply to where it belongs... like new Oreo Emojis...ive dloaded the zip,found the file, then paste the file in /system/fonts...then reboot
now...if i made a mistake somewhere in my explanations well... sorry....
WARNING
IF youre device is bricked or what so ever... its not MY fault....you do that on your own......Ive done it,followed MAGISK instructions and its working....
Not shure about it...DONT DO IT....
DON'T DO TWRP backups with fingerprints/nip/code unlock methods activated on your phone... i had to factory reset phone cuz code was not working.
YES there's a way to recover anyway... THANKS HENKATE
Regarding fingerprint, boot in recovery and go to advanced > file manager and delete data/system/locksettings.db
Then advanced > terminal and type:
cd data/system
rm -rf *.key
Then reboot and you won't have secured lockscreen
MAGISK modules are HERE
Magisk MANAGER is available on PLAYSTORE
BEFORE making a twrp backup... (after data format ect.)...
you may want to FIX the huawei theme manager not working problem for some of us... the FIX is HERE
Thanks to Henkate
Youll need a good file system manager...i'm using ROOT EXPLORER and theres that new FX file explorer
does it work with android 7?
tanlikar1 said:
does it work with android 7?
Click to expand...
Click to collapse
Yes. In fact, this was meant for Android 7, but it should work on Android 6 too.
Absolutely...Im on Nougat emui5
does anyone have stock rom for MLA-L12C636B340 ?
Do you mean original firmware ?
Maybe you can still get it via firmware finder...
virusdunil said:
Do you mean original firmware ?
Maybe you can still get it via firmware finder...
Click to expand...
Click to collapse
ya
Working on Nova?
Does it work in the non plus Nova as well? Any experiences?
Worked on Can-L11. Tested. No need format data, in twrp tree, i add img, that work with encrypted data.
I can't get this to work on my MLA-03, i have TWRP installed and unlocked b/l. I tried to flash RR and Lineage but getting "can't mount" errors up the ying yang. Anyone with MLA-03 got any tips? Is there a certain recovery that is recommended?
Cooks_08 said:
I can't get this to work on my MLA-03, i have TWRP installed and unlocked b/l. I tried to flash RR and Lineage but getting "can't mount" errors up the ying yang. Anyone with MLA-03 got any tips? Is there a certain recovery that is recommended?
Click to expand...
Click to collapse
hi...yes and its a bit confusing...but,just follow instructions for LOS install...forget about /mount data and after flashing ,just reboot
virusdunil said:
hi...yes and its a bit confusing...but,just follow instructions for LOS install...forget about /mount data and after flashing ,just reboot
Click to expand...
Click to collapse
Got the flash working. Used Garak's Twrp and now i got. Thanks.
Does it work for android 8.0 or Huawei nova 2s in particular? I did make unlock the bootloader, but i could not find reliable root method. Please help with advice. Thank you.
Mezo21 said:
Does it work for android 8.0 or Huawei nova 2s in particular? I did make unlock the bootloader, but i could not find reliable root method. Please help with advice. Thank you.
Click to expand...
Click to collapse
Hi there,
I have Nova 2s, carefully follow this thread's instructions, it will 100% works : https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280
Thanks for the guidance, Magisk is doing very well.
Only TWRP is missing, but later.
Huawei Nova
CAN-L01C432B382
Magisk modules not working even if i rooted. Cant install modules from magisk app and twrp .zip
meskafonas said:
Magisk modules not working even if i rooted. Cant install modules from magisk app and twrp .zip
Click to expand...
Click to collapse
did you format data as f2fs? If yes, magisk doesn't go well along with it. If no, then you would get better support at magisk thread
virusdunil said:
Yes,its working...
REMOVE ALL OTHER ROOT...working or not befor installing magisk....may end with....something you dont want...
Maybe it would be best to start with a freshly factory resetted phone.... (anyway,to erase all errors in TWRP,youll format/data so... )
you need bootloader unlock... followed instructions HERE don't forget to OEM UNLOCK in /settings/Developer section on phone..(enable it while pressing repeatedly on Phone version (in ''about phone also in settings)
You need MINIMAL ADB on pc...HERE
You need TWRP recovery installed...HERE
but before doing all that...BE SHURE to have the original UPDATE.APP (firmware from huawei) somewhere on your pc
you will need the BOOT.img from your original firmware... (extract it from the update.app (update.zip for huawei firmware)
HERE
extract the boot.img somewhere on your pc... like on your desktop...
then,youll need 2 magisk things...
the LATEST magisk ZIP file...
and the LATEST MAGISK APK...
FOLLOW THESE INSTRUCTIONS (from Magisk post...i did it and its working :silly: )
Installation Instructions
If you already have Magisk installed, you can directly upgrade through Magisk Manager
For installing Magisk the first time
Make sure to remove any other root, best to restore your boot image back to stock
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
the ADB method is the best...
after reboot,in magisk app,youre supposed to be GREEN checked....
after that,if all green,you can FIX that DATA problem in TWRP...saying cant mount or blablabla...
DO a backup cuz yess,youll loose everything... Hisuite for your apps
in twrp, FORMAT DATA... ...wipe data factory reset...re install your things then,youll be able to do recoverys ect. in twrp
dont forget to RE INSTALL magisk APK after formatting and factory reset
IT WILL take some time TO BOOT... so let it do its thing...
Now about magisk modules...all of them ive tried ended in (blablabla not a magisk module)...
no big deal....just dload the zip and look for the app or file in it... and apply to where it belongs... like new Oreo Emojis...ive dloaded the zip,found the file, then paste the file in /system/fonts...then reboot
now...if i made a mistake somewhere in my explanations well... sorry....
WARNING
IF youre device is bricked or what so ever... its not MY fault....you do that on your own......Ive done it,followed MAGISK instructions and its working....
Not shure about it...DONT DO IT....
DON'T DO TWRP backups with fingerprints/nip/code unlock methods activated on your phone... i had to factory reset phone cuz code was not working.
YES there's a way to recover anyway... THANKS HENKATE
Regarding fingerprint, boot in recovery and go to advanced > file manager and delete data/system/locksettings.db
Then advanced > terminal and type:
cd data/system
rm -rf *.key
Then reboot and you won't have secured lockscreen
Click to expand...
Click to collapse
Do you have this problem with fingerprint? [emoji853] https://r.tapatalk.com/shareLink?ur...share_tid=3907398&share_fid=3793&share_type=t
Enviado desde mi HUAWEI CAN-L11 mediante Tapatalk
Does Anyone know any method to root and install magisk in android pie ?
Lilesh Jadav said:
Does Anyone know any method to root and install magisk in android pie ?
Click to expand...
Click to collapse
Remove screenlocks 1st to make things easy.
Download twrp 3.3.1.0 img and zip
Download magisk 19.3
Copy twrp zip and magisk zip to sdcard
Open a cmd prompt and enter the following
PHP:
adb reboot bootloader
fastboot boot (drag n drop twrp img here)
Once twrp is booted install magisk and reboot to system you should be rooted. *If you want twrp installed as your recovery, install the twrp zip 1st then install magisk
https://forum.xda-developers.com/z2-force/how-to/oreo-nougat-how-to-root-z2-t3756669 works for pie as well. Be sure to use the latest TWRP.
Hi
I can't install Magisk
I tried to install using this thread https://forum.xda-developers.com/t/install-magisk-on-android-11-r-100-functional.4162761/
Tried to install Magisk on OctaviOS 1.3
If i do this
Code:
1-Reboot in twrp and flash MagiskR.zip
2-Reboot system and install MagiskR.APK
3-Open magisk and update MagiskR.APK
And go to Magisk I have only 3 options Magism home page, Magisk Logs, Magisk settings and nothing else. No plugins and ways to give root to applications.
Also it types.
Magisk
Latest: N/A
Installed: N/A
Status:N/A
A/B: Yes
SAR: Yes
Ramdisk: Yes
When I try to do all 5 steps
Code:
Twrp installation:
1-Reboot in twrp and flash MagiskR.zip
2-Reboot system and install MagiskR.APK
3-Open magisk and update MagiskR.APK
4-Reboot in twrp and Flash Magisk-e66b0bf3(20425).zip
5-Reboot system and ready
I get always in fastboot
Then I tried to install Magisk on Syberia Project and after flashing zip I don't have Magisk Manager installed on my phone. I installed apk from this thread and tried lastest apk from Github. Both didn't work
I also tried to update Magisk apk to Beta version and nothing changed.
Is your bootloader unlocked?
Hello to everyone, I love AOSP roms but i always miss the MIUI camera sometimes it cames handy to have manual controls, i miss the haptic feedback too some roms have some personalization on that but it's always weaker when compared with the MIUI. Is there any modules that can surpass thar like the ANX camera but for the haptic? And i would like to know if i root my device i will have a data loss and whats the best method to do it.
Thanks to all the help in advance.
How the Vibration behaves depends on the Custom ROM. I found ArrowOS to have nice haptics, and in Accessibility -> Haptic Feedback I can set the strength.
No. Only unlocking bootloader formats data.
You can root your phone anytime.
Note: After every update, you have to re-apply Root, because Updates replace the Boot-partition, and therefore remove Root.
How to apply Root with TWRP:
Install Magisk,
boot TWRP,
backup Boot,
Reboot,
Open Magisk and click "Install" > "Select and Patch a File":
TWRP/BACKUPS/[backup_name]/[backup_date]/boot.emmc.win
Use File Manager:
Move this file: Downloads > "magisk_patched_xyz.img"
To: TWRP > BACKUPS > [backup_name] > [backup_date]
delete the old boot.emmc.win,
rename "magisk_patched_xyz.img" to "boot.emmc.win"
boot TWRP,
restore Boot
So basically, Magisk can patch TWRP backups of the Boot-partition too. You just have to move & rename the patched boot-image back into the TWRP Backup-folder, so that TWRP restores the patched Boot.
You can also use the official method:
Apply Root with a PC and "ADB Pull" command, to pull the Boot-partition, patching that, and then pushing the patched Boot-image. This is the official way.
cyanGalaxy said:
How the Vibration behaves depends on the Custom ROM. I found ArrowOS to have nice haptics, and in Accessibility -> Haptic Feedback I can set the strength.
No. Only unlocking bootloader formats data.
You can root your phone anytime.
Note: After every update, you have to re-apply Root, because Updates replace the Boot-partition, and therefore remove Root.
How to apply Root with TWRP:
Install Magisk,
boot TWRP,
backup Boot,
Reboot,
Open Magisk and click "Install" > "Select and Patch a File":
TWRP/BACKUPS/[backup_name]/[backup_date]/boot.emmc.win
Use File Manager:
Move this file: Downloads > "magisk_patched_xyz.img"
To: TWRP > BACKUPS > [backup_name] > [backup_date]
delete the old boot.emmc.win,
rename "magisk_patched_xyz.img" to "boot.emmc.win"
boot TWRP,
restore Boot
So basically, Magisk can patch TWRP backups of the Boot-partition too. You just have to move & rename the patched boot-image back into the TWRP Backup-folder, so that TWRP restores the patched Boot.
You can also use the official method:
Apply Root with a PC and "ADB Pull" command, to pull the Boot-partition, patching that, and then pushing the patched Boot-image. This is the official way.
Click to expand...
Click to collapse
Sorry, but why can't we just flash magisk zip to root? Im on crDroid now, and i just root my device with flashing magisk zip file through twrp.
wokdogol said:
Sorry, but why can't we just flash magisk zip to root? Im on crDroid now, and i just root my device with flashing magisk zip file through twrp.
Click to expand...
Click to collapse
Yes you can do that too.
I didn't mention it, because the Magisk developer said that that method is outdated. ^^
But yes, you can do this. Just rename Magisk.apk to Magisk.zip
Hi,
When my phone automatically updated to MIUI 14, a error message appeared and then, my root was lost...
Il tryed several times to get it back patching boot.img from Magisk.. (canary version included), but when I install patched.img my phone does not start and i have to get back to boot.img
Any ideas?
Rename magisk from apk to zip, and then flash the magisk zip from recovery
Saezrfff said:
Hi,
When my phone automatically updated to MIUI 14, a error message appeared and then, my root was lost...
Il tryed several times to get it back patching boot.img from Magisk.. (canary version included), but when I install patched.img my phone does not start and i have to get back to boot.img
Any ideas?
Click to expand...
Click to collapse
Hi,
Boot your F3 into fastboot mode and connect to a PC,
Download "Temporary Recovery" and unzip, run the "RUN ME Temporary TWRP A13-Orange Fox Recovery.bat" file and choose TWRP.
Once rebooted select: Advanced from within TWRP and tap "Flash current TWRP", copy over the included Magisk files into the internal memory (I use a OTG adaptor and USB Stick), install Magisk V26.1.apk, when in recovery you can install Magisk as a .apk format.
Included are the files i use when switching between roms, included are the latest, Magisk V26.1 and Magisk Delta, it also includes the latest versions of TRWP/OrangeFox recovery and other goodies,
I hope it helps
It's possible that the MIUI 14 update may have caused compatibility issues with your previous root method. You could try using a different root method or a different version of Magisk. Additionally, make sure you are following the correct steps for patching the boot.img file and installing it. If the issue persists, you may need to wait for an updated version of Magisk or seek assistance from the Magisk community.
you can try patching Boot.img instead of flashing Magisk.zip
you can do a OrangeFox/TWRP Backup of Boot-partition and patch the resulting "boot.emmc.win" file in Magisk App, because it's actually just a normal partition-image.
then flash the magisk-patched image file.
no pc required. just a custom recovery.
you can try the new Magisk v26.1, or Magisk Alpha (not affiliated with official Magisk).
i use Magisk v26.1 Official but I'm on AOSP