Related
Hey all,
I restarted my phone yesterday and it was stuck in a boot loop for some reason. I tried to factory reset, but doing so still resulted in a boot loop. I then proceeded to attempt to flash stock, but the flash tool crashed while during the process. When I try to boot to download mode now, I get "Secure booting error, Error!: Boot Certifcation Verify". I know this also happens on the G2, and I know the process for fixing it. But when trying to use the same method with the G3, I can't access my filesystem from Linux. Any help? Thanks.
helios4695 said:
Hey all,
I restarted my phone yesterday and it was stuck in a boot loop for some reason. I tried to factory reset, but doing so still resulted in a boot loop. I then proceeded to attempt to flash stock, but the flash tool crashed while during the process. When I try to boot to download mode now, I get "Secure booting error, Error!: Boot Certifcation Verify". I know this also happens on the G2, and I know the process for fixing it. But when trying to use the same method with the G3, I can't access my filesystem from Linux. Any help? Thanks.
Click to expand...
Click to collapse
were you able to fix this? I have the same problem and unable to find any solution.
xlnzee said:
were you able to fix this? I have the same problem and unable to find any solution.
Click to expand...
Click to collapse
1) Which exact model do you have?
2) Where are you from?
3) Which exact stock version did your phone come with?
4) What did you try to flash exactly, and how did you do it?
Let me know all this so I can see if I can help you :good:
Hey!
1) Which exact model do you have? - LG G3 D855
2) Where are you from? - India
3) Which exact stock version did your phone come with? - had installed earlier "LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0" TOT
4) What did you try to flash exactly, and how did you do it - Updated to Lollipop via kdz, a few things were broken, wanted to revert back to TOT. when the process started in download mode, got an error and then "Secure booting error, Error!: Boot Certifcation Verify".
If I press volume up and plug in then it gooes to qhsusb_bulk on device manager. it gets detected under Ubuntu VM, but dosent show th drives. thats my story.
---------- Post added at 05:49 PM ---------- Previous post was at 05:43 PM ----------
rodrigofd said:
1) Which exact model do you have?
2) Where are you from?
3) Which exact stock version did your phone come with?
4) What did you try to flash exactly, and how did you do it?
Let me know all this so I can see if I can help you :good:
Click to expand...
Click to collapse
Hey!
1) Which exact model do you have? - LG G3 D855
2) Where are you from? - India
3) Which exact stock version did your phone come with? - had installed earlier "LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0" TOT
4) What did you try to flash exactly, and how did you do it - Updated to Lollipop via kdz, a few things were broken, wanted to revert back to TOT. when the process started in download mode, got an error and then "Secure booting error, Error!: Boot Certifcation Verify".
If I press volume up and plug in then it gooes to qhsusb_bulk on device manager. it gets detected under Ubuntu VM, but dosent show th drives. thats my story.
xlnzee said:
Hey!
1) Which exact model do you have? - LG G3 D855
2) Where are you from? - India
3) Which exact stock version did your phone come with? - had installed earlier "LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0" TOT
4) What did you try to flash exactly, and how did you do it - Updated to Lollipop via kdz, a few things were broken, wanted to revert back to TOT. when the process started in download mode, got an error and then "Secure booting error, Error!: Boot Certifcation Verify".
If I press volume up and plug in then it gooes to qhsusb_bulk on device manager. it gets detected under Ubuntu VM, but dosent show th drives. thats my story.
---------- Post added at 05:49 PM ---------- Previous post was at 05:43 PM ----------
Hey!
1) Which exact model do you have? - LG G3 D855
2) Where are you from? - India
3) Which exact stock version did your phone come with? - had installed earlier "LGD855AT-00-V10e-EUR-XX-JUL-08-2014-32G+0" TOT
4) What did you try to flash exactly, and how did you do it - Updated to Lollipop via kdz, a few things were broken, wanted to revert back to TOT. when the process started in download mode, got an error and then "Secure booting error, Error!: Boot Certifcation Verify".
If I press volume up and plug in then it gooes to qhsusb_bulk on device manager. it gets detected under Ubuntu VM, but dosent show th drives. thats my story.
Click to expand...
Click to collapse
SO, long story short... if you ARE ROOTED; I can save you ... if not..... hmm.. you might be screwed ...
Sorry
rodrigofd said:
SO, long story short... if you ARE ROOTED; I can save you ... if not..... hmm.. you might be screwed ...
Sorry
Click to expand...
Click to collapse
I was rooted before updating to lollipop, then tried to back dowk to KK with TOT and this happened, so I dont think I am rooted any more.
The better question is: do you have TWRP (custom recovery) installed? If you do, your phone can be fixed. If not, you are probably screwed.
Basically it sounds to me like your phone managed to flash the updated Android 5.0 bootloader but didn't update the LAF image (download mode). The old download mode doesn't work on the new bootloader, it gives the error you are experiencing.
Because you still have a LAF partition, and presumably a recovery partition (even if they are not working) you cannot access fastboot mode.
In other words, there may be no way to fix your situation.
As the hardware is fine there must be a method, but it might be something only LG can do.
Lennyuk said:
Basically it sounds to me like your phone managed to flash the updated Android 5.0 bootloader but didn't update the LAF image (download mode). The old download mode doesn't work on the new bootloader, it gives the error you are experiencing.
Because you still have a LAF partition, and presumably a recovery partition (even if they are not working) you cannot access fastboot mode.
In other words, there may be no way to fix your situation.
As the hardware is fine there must be a method, but it might be something only LG can do.
Click to expand...
Click to collapse
I'm in the same situation now.
I was bumped with TWRP and CM12 installed. I wanted to unroot and go back to stock. Started a flash with LG flashing tool, but it was taking ages, so I unplugged the USB cable in the middle.
Now whenever I boot via either VolUp+USB or trying to get into a recovery I get secure boot error.
Is there a way to fix this ? Or do I need to send a phone to LG ?
This has happened to me today. Downgrading got stuck at 3%. LG Flash tool said to remove phone and plug back in. Any way to fix
Also, does anyone know if downgrading voids warranty or anything?
militantslash said:
This has happened to me today. Downgrading got stuck at 3%. LG Flash tool said to remove phone and plug back in. Any way to fix
Also, does anyone know if downgrading voids warranty or anything?
Click to expand...
Click to collapse
I didn't find a way to fix it, so I've just sent it to LG repair shop. They haven't yet looked at it so I don't know how much would it cost.
People just tell the service center that you were upgrading from KitKat to Lollipop when the problem happened
Evidence wise it support your claim since the OTA from KitKat to Lollipop overwrites the aboot, sbl, laf and recovery partitions and service center people ultimately cannot tell between failed OTA and a failed KDZ flash
jodvova said:
I didn't find a way to fix it, so I've just sent it to LG repair shop. They haven't yet looked at it so I don't know how much would it cost.
Click to expand...
Click to collapse
Did you get an answer on the cost yet? I have the same problem, so I'm probably looking at the same resolution as you.
yourzero said:
Did you get an answer on the cost yet? I have the same problem, so I'm probably looking at the same resolution as you.
Click to expand...
Click to collapse
It was free for me, as it was on warranty.
solution for no download mode
Hi guys.
If you cant enter into download mode then you need to force your g3 in to qhsusb bulk mode by shorting the test point.
When you short battery must be removed.
After short your phone will be detected as qhsusb bulk mode.
Send me msg in pm for further help.
If u dont know the test point then let me know.
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-all-variants/
Lg g# test point free! Here !
just got the PDF! this is the point I Found to put your LG G3 in Qualcomm 9008 mode
XDA not letme to put the link and if you want it FOR FREE just primvate me an message I will sent you a link!
aftabalam8c2 said:
Hi guys.
If you cant enter into download mode then you need to force your g3 in to qhsusb bulk mode by shorting the test point.
When you short battery must be removed.
After short your phone will be detected as qhsusb bulk mode.
Send me msg in pm for further help.
If u dont know the test point then let me know.
Click to expand...
Click to collapse
hey need help . check pm
Hi there!
aftabalam8c2 said:
Hi guys.
If you cant enter into download mode then you need to force your g3 in to qhsusb bulk mode by shorting the test point.
When you short battery must be removed.
After short your phone will be detected as qhsusb bulk mode.
Send me msg in pm for further help.
If u dont know the test point then let me know.
Click to expand...
Click to collapse
Hi! I just recently bricked my LG G3 D852, and I would really appreciate it if you could PM me and help me out here.
http://forum.xda-developers.com/showthread.php?t=2785089
Try this. This will revert to factory default, tons of bloatware included ?
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Finally I've managed to unbrick the phone after the stupid fail with the configs tuning.
Warning: Everything will be wiped from the internal storage. I mean NO ONE BYTE WILL SURVIVE.
First of all download the archive I've prepared. It content is:
LG Mobile driver – LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3
LG Flash Tool – Setup_LGFlashTool_1.8.1.1023
Proprietary DLL for the phone – LGF460K_20140708_LGFLASHv160
And the diamond – LGF460KAT-00-V10o-KT-KR-OCT-22-2014+0.tot
Take it here: http://unl.su/f460k_unbrick.zip
Mirror: https://mega.co.nz/#!aA5gET6D!fE5brJiM6Okv0kmzrjoZ-dEmAe78KslJMuUMSKBWyxQ
After you have managed to download and unpack it, do the following:
1. Disconnect the phone
2. Install the drivers (this version differs from S50 for about 60 kilobytes but they're important for the F460 series phones)
3. Follow this illustrated flashing guide: http://forum.xda-developers.com/showthread.php?t=2772199
4. If the phone is stuck at blue screen with the number "3" for longer than 10 minutes – take out the cable, battery, and pu the battery back, connecting the cable is unnecessary. Then power on the phone.
5. After reboot an Android with revolving crystal will appear for about 30 seconds - it's ok.
6. Wait for Olleh logo.
7. Here you are. Thanks meter is on the left.
is there a way to remove bootloader? on this model? i can't install any zip file... when use flashify to install any .img the phone locks up on "fastmode" and that model doesn't have "factory reset" only "secude mode" (like windows). Any idea how to install Twrp or any other for F460K? Thanks.
Great work I flashed SphinX on my F460K is there any better ROM available on net? or stock one is good?
pls help, i am getting strange error
pls help me out
i am stuck
i flash v20c using flashtool
it boots but stuck on complete boot circle
if i restart it does same
while using .tot i got the error as in screenshot attachment
nauman284 said:
pls help me out
i am stuck
i flash v20c using flashtool
it boots but stuck on complete boot circle
if i restart it does same
while using .tot i got the error as in screenshot attachment
Click to expand...
Click to collapse
You need to flash it one more time... it is better to use lg flash tools
nauman284 said:
pls help me out
i am stuck
i flash v20c using flashtool
it boots but stuck on complete boot circle
if i restart it does same
while using .tot i got the error as in screenshot attachment
Click to expand...
Click to collapse
i think phone of you hand logo, right?
is this f460k cat6?
dashand said:
is this f460k cat6?
Click to expand...
Click to collapse
Yes
Model different in lg flash tool
I see different model name in the flash tool I believe it should be MCF460K
anyone tried installing this stock rom with different model name in display..... Please confirm. I have f460k olleh waiting for confirmation to flash it....under bootloop
Appreciate your suggestion friends
Same problem with nauman284.
Please help me.
Help me e
How to Donwgrade Marshmellows to Lolipop and Install TWRP ??
Please help me, my Lg G3 F460k is dead, no download, no recovery, only "Qualcomm HS-USB QDLoader 9008" in the device manager of windows 7, what can I do?
Thanks brothers
my phone is not working
pilo99 said:
i think i accidently bricked my lg g4 ....now it is stuck on download mode , i tried to get to the stock recovery through the buttons ..volume down and power but it keep rebooting to download mode , plz any help will be appreciated
Click to expand...
Click to collapse
Have you pulled battery and turned back on?
pilo99 said:
i think i accidently bricked my lg g4 ....now it is stuck on download mode , i tried to get to the stock recovery through the buttons ..volume down and power but it keep rebooting to download mode , plz any help will be appreciated
Click to expand...
Click to collapse
i did pull the battery and waited 30 second and it is the same thing it keep going to download mode
pilo99 said:
i think i accidently bricked my lg g4 ....now it is stuck on download mode , i tried to get to the stock recovery through the buttons ..volume down and power but it keep rebooting to download mode , plz any help will be appreciated
Click to expand...
Click to collapse
more info is better than none, what did you do to "accidentally brick" your phone? and if you are stuck in download mode you could try the lg mobile support tool and re load the rom for your device.
zPacKRat said:
more info is better than none, what did you do to "accidentally brick" your phone? and if you are stuck in download mode you could try the lg mobile support tool and re load the rom for your device.
Click to expand...
Click to collapse
Thanks a lot , i dont think there is a room yet for lg g4 tmobile i looked every where for the kdz and tot file ...
pilo99 said:
Thanks a lot , i dont think there is a room yet for lg g4 tmobile i looked every where for the kdz and tot file ...
Click to expand...
Click to collapse
READ completely, including the link in 4 before starting!!!
download the tool using the lg d851, under t-mobile. the tool is generic, and can be found at lg.com under support/downloads
1. install LG Mobile Support Tool
2. run Tool, it will query lg for updates and do so if needed.
3. Install USB Driver (dismiss if you have done so already)
4. follow this process: http://forum.xda-developers.com/showpost.php?p=51268802&postcount=21 (use 5. below to put into download mode, not vol up and down like the link states)
5. with your device off, hold the volume up button while plugging in your USB cable with the Tool open.
6 you system will recognize the device and configure drivers, this will take a minute.
7. continue following the link in 4.
I ran into the same problem and now i'm stuck in downloadmode!
Does this method work? Or is there any other fix yet?
Thanks in advance!
schwederino said:
I ran into the same problem and now i'm stuck in downloadmode!
Does this method work? Or is there any other fix yet?
Thanks in advance!
Click to expand...
Click to collapse
no i did not fix mine yet i am on tmobile am not sure if they will consider return am still within retun policy
hey guys, don't ask for a different fix if you don't bother to explain how your phone got stuck in download mode. as for does this work? Why don't you try, it's the same tool used to upgrade firmwares instead of using OTA, and the link included shows how to get the tool to download the file (if it sees the same/current f/w it does not download the firmware) and you have nothing to loose, and this method is often used to recover from "soft bricking" your phone.
i was restoring my LG G3 to stock through the lg flash tool .....when i got through with it and restore was succesfull. somehow i forget the usb cable plugged through my pc usb port ...then connected my lg g4 that is where the flash tool got my Lg g4 on Downloade mode ....i tried all the methodes somehow i think the recovery is messed up .....i can get to the recovery through the button but it reboot straight to the download mode ....thanks every one for their support
pilo99 said:
i was restoring my LG G3 to stock through the lg flash tool .....when i got through with it and restore was succesfull. somehow i forget the usb cable plugged through my pc usb port ...then connected my lg g4 that is where the flash tool got my Lg g4 on Downloade mode ....i tried all the methodes somehow i think the recovery is messed up .....i can get to the recovery through the button but it reboot straight to the download mode ....thanks every one for their support
Click to expand...
Click to collapse
did you try what I listed earlier?
Yesi did every step and it does not seemto help.. Thanks again...
Yes i followed all the steps including reinstalling drivers and the lg mobile for the D851
Good luck, if you did the kdz there is the LG flash tool
zPacKRat said:
Good luck, if you did the kdz there is the LG flash tool
Click to expand...
Click to collapse
When did the kdz come out? You have link for this?
MicroMod777 said:
When did the kdz come out? You have link for this?
Click to expand...
Click to collapse
don't think it's out yet, however my statement was somewhat incoherent. I meant to say if he had the kdz, he could use the flash tool to recover his phone.
zPacKRat said:
don't think it's out yet, however my statement was somewhat incoherent. I meant to say if he had the kdz, he could use the flash tool to recover his phone.
Click to expand...
Click to collapse
Yea, at this point there no way to fix this without a kdz that I know of.
Call LG and tell them you need the kdz to restore your G4.
i was lucky, i had flashed twrp before my phone soft brick..
Sent from my unlocked and rooted LG-H815
I got an LG G4 which is stuck on lg screen. When I put it in download mode, it shows download mode for a few seconds and restarts. I was trying to flash ZVB over ZVD and it ended up like this. Model is ls991 . Any help would be really appreciated!
Anyone got any idea? The whole thing started with getting rid of the Genisys rom ... I did not like it ... I thought I was going to bring it back to the stock, but then LG Up wrote an unkown device ... I thought it was flash with lg bridge ... that's what I lost. .. has removed recovery and has stopped updating at 16% ... since then it is only download mode I tried to update but failed with all three programs ... LG up to start - unkown device, LG bridge stop at 16% , LG Falsh Tool 9% ... sorry for my english
I dont understand why this happens because i follow the rules exactly.
I was using MM with TWRP+Root.(Not kingroot or other, just SuperSu 2.52) I was flashed .zip file from Xda. I mean i was using L and after that .zip files pops out for MM, i just simply flash the MM zip file and got it worked.
After flashing kdz file with LGUP now my phone stuck at twrp. Now i stuck at twrp. I tried to restore my backup on external_sd but didn't work either. Any ideas?
LG Up can't wipe twrp , so tried flashing again with LG Flashtool with lastest driver.
fOxunO said:
LG Up can't wipe twrp , so tried flashing again with LG Flashtool with lastest driver.
Click to expand...
Click to collapse
I was trying this but Lg Flash Tool Stuck at %60. I was not update LG Drivers maybe because of this. I dont know what to do now. What must i have to do?
http://i65.tinypic.com/2u4op37.jpg
Phone shows nothing but %0
Afterr battery pull and restarting the process with new drivers, now LG Mobile Support Tool says device is disconnected. I'm confused.
okanb3 said:
I was trying this but Lg Flash Tool Stuck at %60. I was not update LG Drivers maybe because of this. I dont know what to do now. What must i have to do?
http://i65.tinypic.com/2u4op37.jpg
Phone shows nothing but %0
Afterr battery pull and restarting the process with new drivers, now LG Mobile Support Tool says device is disconnected. I'm confused.
Click to expand...
Click to collapse
I had same problem with it being stuck at 60% what I did was not to press cancel or unplug but pressed retry and it worked. Also change the language to English and the question marks will disappear.
As for the device disconnected issue i'm not sure how to solve that one you could try running flashtool in windows 7 compatible mode.
okanb3 said:
I was trying this but Lg Flash Tool Stuck at %60. I was not update LG Drivers maybe because of this. I dont know what to do now. What must i have to do?
http://i65.tinypic.com/2u4op37.jpg
Click to expand...
Click to collapse
When can't go , I choose phonediag to CSEmergency flashing can finished.
I have use CSEmergency 3 times sucsessfully with CSE Flash and newest driver.
Solved my problem. The problem was using LGUP firmware to go back to stock. LGUP Doesnt work if you had root+twrp. Flashed kdz using the Lg Flash Tool 2014 ( I had really more problems when doing this but i made it.) Phone back to normal.
Hello, (complete n00b here)
Several days ago I've tried to flash a 6.0 MM (from 5.1) to my LG G4 H815 phone. There was no option to do it automatically so I proceded to do it manually via flashboot.
I hard-bricked it to oblivion as in black screen, no response whatsoever.
While investigating @ the internet I've managed to understand I could get it fixed via quadcomm drivers (mode 9008).
Tried various "fixes" for H815 but was getting safari download errors. For some reason I tried a LS991 fix and it worked. When I started the phone it showed no logo but just a secure booting error 1006.
Still, could enter firmware download so I began to flash a lot of KDZ firmwares with no success.
LGUP shows my model : H81510H.
While in fastboot mode there is a note below (wasn't there the first time) with codes : 633 B46 or something like that.
While flashing anything it ALWAYS STOPS at 9% with a tot anti-rollback error. While flashing the code changes briefly where one can read smth like : LGLS991ZVA ver. 6.0
Managed to download some KDZ for that exact model, SAME ERROR. Tried to find / flash LS991ZVA with no success in finding a TOT file.
Also, managed to get ADB drivers up and it shows unauthorized in listing (LS991). Fastboot does not detect my device even in fastboot mode @ phone.
Please HELP!
Longbranch said:
Hello, (complete n00b here)
Several days ago I've tried to flash a 6.0 MM (from 5.1) to my LG G4 H815 phone. There was no option to do it automatically so I proceded to do it manually via flashboot.
I hard-bricked it to oblivion as in black screen, no response whatsoever.
While investigating @ the internet I've managed to understand I could get it fixed via quadcomm drivers (mode 9008).
Tried various "fixes" for H815 but was getting safari download errors. For some reason I tried a LS991 fix and it worked. When I started the phone it showed no logo but just a secure booting error 1006.
Still, could enter firmware download so I began to flash a lot of KDZ firmwares with no success.
LGUP shows my model : H81510H.
While in fastboot mode there is a note below (wasn't there the first time) with codes : 633 B46 or something like that.
While flashing anything it ALWAYS STOPS at 9% with a tot anti-rollback error. While flashing the code changes briefly where one can read smth like : LGLS991ZVA ver. 6.0
Managed to download some KDZ for that exact model, SAME ERROR. Tried to find / flash LS991ZVA with no success in finding a TOT file.
Also, managed to get ADB drivers up and it shows unauthorized in listing (LS991). Fastboot does not detect my device even in fastboot mode @ phone.
Please HELP!
Click to expand...
Click to collapse
H81510h is os version it is still at 5.1 I think....what may help is plug your phone in with lgup and drop the battery out of it then closes of LG up put battery back in and start LG up and find kdz that matchs your phone and make sure that it doesn't have anti rollback.....
stinka318 said:
H81510h is os version it is still at 5.1 I think....what may help is plug your phone in with lgup and drop the battery out of it then closes of LG up put battery back in and start LG up and find kdz that matchs your phone and make sure that it doesn't have anti rollback.....
Click to expand...
Click to collapse
Hello and thx for reply. I tried to do what u've said. It did something (I was looking for a while back). When I plug the cable back in, my windows 7 immediately installs quadcomm hs-usb driver (9008) and my phone acts as if it was dead. LGUP cannot find it in that state. I've been trying to QFIL the "proper" soft but it continues to pop different errors (using different QFIL versions). Either saharafail or some sort of download fail.
LGUP still presents an error (if I decide to "fastboot" it) @ 9% 0x2000, TOT antirollback version is smaller than device version.
How can I make sure I've got the proper KDZ without ANTI-ROLLBACK?
Longbranch said:
Hello and thx for reply. I tried to do what u've said. It did something (I was looking for a while back). When I plug the cable back in, my windows 7 immediately installs quadcomm hs-usb driver (9008) and my phone acts as if it was dead. LGUP cannot find it in that state. I've been trying to QFIL the "proper" soft but it continues to pop different errors (using different QFIL versions). Either saharafail or some sort of download fail.
LGUP still presents an error (if I decide to "fastboot" it) @ 9% 0x2000, TOT antirollback version is smaller than device version.
How can I make sure I've got the proper KDZ without ANTI-ROLLBACK?
Click to expand...
Click to collapse
This may help........
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
stinka318 said:
This may help........
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Click to expand...
Click to collapse
Thx again. Uppercut shows H81510H as LGUP did. Is it possible that it's somehow write-protected?
It confuses me, since during the firmware update on my phone, I get this small box below the picture showing wierd codes : 633A Bxx and when I'm trying to flash my phone, the code gets longer with LS991ZVA v6.0 and more other. It then stops.
Funny thing is, when I got the phone I couldn't even connect to the LG bridge to update it at all. I've managed to do it bugging the MTP protocol but THAT on the other hand prevented me from copying stuff / FLASH my phone to MM 6.0. Had to factory reset it back then and all went back to "normal" = LG couldnt detect my device but I could copy photos or stuff from it.
NOW, when my phone is bricked, LGbridge DETECTS my phone (in fastboot), downloads the newest KDZ update BUT cannot install it (same thing as in LGUP). Hence my question : is it somehow write-protected?
Longbranch said:
Thx again. Uppercut shows H81510H as LGUP did. Is it possible that it's somehow write-protected?
It confuses me, since during the firmware update on my phone, I get this small box below the picture showing wierd codes : 633A Bxx and when I'm trying to flash my phone, the code gets longer with LS991ZVA v6.0 and more other. It then stops.
Funny thing is, when I got the phone I couldn't even connect to the LG bridge to update it at all. I've managed to do it bugging the MTP protocol but THAT on the other hand prevented me from copying stuff / FLASH my phone to MM 6.0. Had to factory reset it back then and all went back to "normal" = LG couldnt detect my device but I could copy photos or stuff from it.
NOW, when my phone is bricked, LGbridge DETECTS my phone (in fastboot), downloads the newest KDZ update BUT cannot install it (same thing as in LGUP). Hence my question : is it somehow write-protected?
Click to expand...
Click to collapse
Have you tried to eset it by pushing power and volume own then when you see bootsplash then release power button and hen quickly push the power button again....
But in your case push power and volume down within the count or 20 then release power then push power button again and see what happens and then try the same thing on volume up......
Thanks for the reply.
I did what u've said. Despite no logo I tried to release power button for a second just after the screen's brightness goes up (I also get a small vibration @ start). Everytime I get secure booting error 1006 after a few seconds.
On the other hand when I did that with volume UP button there was no error but there was nothing aswell until I release power button in which case I got the secure booting error. All of the above tries were done with no USB connection with anything.
Longbranch said:
Thanks for the reply.
I did what u've said. Despite no logo I tried to release power button for a second just after the screen's brightness goes up (I also get a small vibration @ start). Everytime I get secure booting error 1006 after a few seconds.
On the other hand when I did that with volume UP button there was no error but there was nothing aswell until I release power button in which case I got the secure booting error. All of the above tries were done with no USB connection with anything.
Click to expand...
Click to collapse
Do try with usb s well it may do something r do nothing......
Can't tell atm since I gave it to professionals. I'll wait and see how it'll turn up. Thx for all the effort tho, was nice to tinker with a lil help
@Longbranch did you solve this problem ? I'm in the same state but my phone model is H810, everything else is the same as yours.
Nope, not really. I gave it back to the reseller and my money got returned luckily.
The professionals I refer to above did install a specific firmware for the ls991 type. Firmware ZVB I think. The only one appliable apparently. Anyways, as I suspected the ls991 type is for the US and therefore it didn't work in my country in EU. My sim card wouldnt work with it. Besides, without the sim card, the phone decided to freeze and die after several minutes every time I turn it on. Swapped for LG G5 and it's working flawlessly up until this day.
good for you, what i don't understand is that it's a h810 model but now identify as ls991 does that mean you can convert it just by a Qfil flash? I may try another model flash if can't find a suitable Rom for it
Longbranch said:
Nope, not really. I gave it back to the reseller and my money got returned luckily.
The professionals I refer to above did install a specific firmware for the ls991 type. Firmware ZVB I think. The only one appliable apparently. Anyways, as I suspected the ls991 type is for the US and therefore it didn't work in my country in EU. My sim card wouldnt work with it. Besides, without the sim card, the phone decided to freeze and die after several minutes every time I turn it on. Swapped for LG G5 and it's working flawlessly up until this day.
Click to expand...
Click to collapse
Chebhou said:
good for you, what i don't understand is that it's a h810 model but now identify as ls991 does that mean you can convert it just by a Qfil flash? I may try another model flash if can't find a suitable Rom for it
Click to expand...
Click to collapse
Yes! That's what I and neutrondev telling everyone :
do not use qfil without the knowledge about the result!
The only working firehose file available out there is for the ls991 and that means if you use it it will turn your device into a ls991 without any way to get back to your previous device model!!
.
Sent from my LG-H815 using XDA Labs
@steadfasterX since I have done it already is there any way to get it working even as an LS991 ?
here is what i did till now
the reason for using Qfill is that it went dead after flashing an H810 rom .
after that when it's in download mode it doesn't allow me to flash the ls911ZV5 ls911ZV6 ls911ZV6_12 roms that i found ( it says LS991ZVA )
so i went in fastboot and flashed boot/aboot/recovery....img extracted from the ls911ZV6 rom then it accepted the rom in download mode
but it is stuck in a hard bootloop ( reboots when it is getting in recovery but still has download mode yet no fastboot as before)
any thoughts ?
Chebhou said:
@steadfasterX since I have done it already is there any way to get it working even as an LS991 ?
here is what i did till now
the reason for using Qfill is that it went dead after flashing an H810 rom .
after that when it's in download mode it doesn't allow me to flash the ls911ZV5 ls911ZV6 ls911ZV6_12 roms that i found ( it says LS991ZVA )
so i went in fastboot and flashed boot/aboot/recovery....img extracted from the ls911ZV6 rom then it accepted the rom in download mode
but it is stuck in a hard bootloop ( reboots when it is getting in recovery but still has download mode yet no fastboot as before)
any thoughts ?
Click to expand...
Click to collapse
Yes it's possible. You can boot a h811 H815 or any other rom you like. Even LOS!!
Great right? BUT you are bounded to the ls991 modem and so you need to be in a sprint network to use telephony. That means the phone is now useless outside the US .
And you wrote you tried ls911 ROMs? I hope you meant ls991
I work on a fully working experience on every network though. Checkout my proof of concept for unlocking the bootloader thread
I can go into details on IRC if you like.
..
Sent from my LG-H815 using XDA Labs
@steadfasterX thank you for keeping up with me ! ( btw what room on IRC ?)
for now I have used Qfill again and got fastboot working again and flashed TWRP ( not sure where ! ) so when the phone is off and i plug the usb it boots to twrp ( but it doesn't in recovery )
normal boot will show "secure boot error 1002"
then i flashed twrp img to recovery partition using twrp but it didn't work in recovery ( still reboots after showing Recovery Mode loading screen )
also tried to load some roms on the device to try them but I got error "file too large for filesystem " when copying them .
atm I don't know the state I'm in and what should be next ?
btw here are the recovery log and dmesg
Chebhou said:
@steadfasterX thank you for keeping up with me ! ( btw what room on IRC ?)
for now I have used Qfill again and got fastboot working again and flashed TWRP ( not sure where ! ) so when the phone is off and i plug the usb it boots to twrp ( but it doesn't in recovery )
normal boot will show "secure boot error 1002"
then i flashed twrp img to recovery partition using twrp but it didn't work in recovery ( still reboots after showing Recovery Mode loading screen )
also tried to load some roms on the device to try them but I got error "file too large for filesystem " when copying them .
atm I don't know the state I'm in and what should be next ?
btw here are the recovery log and dmesg
Click to expand...
Click to collapse
Np we can bring you back to life but as already said without cell service. That's the price for the firehose and unlocked feeling you have now.
Did you found and read my thread here?
https://forum.xda-developers.com/g4/general/bl-unlock-unlock-bootloader-proof-t3648288
There you will find some more info and also the IRC details how you can find me. I'm online from Monday to Friday mainly.
It's much easier to talk in chat then here. once all the details are known I will provide a full guide.
.
Sent from my LG-H815 using XDA Labs