Benuo Galaxy S8 plus leather flip case - Samsung Galaxy S8+ Accessories

This is my review of the $25 Benuo Galaxy S8 plus leather flip case:
https://www.amazon.com/Benuo-Vintag...172439&sr=8-4&keywords=benuo+leather+case+s8+
I received a free case in exchange for an honest review.
First thing is first, the case is a good case, if you like the folio design and like leather. Personally I love the design, but leather isn’t something I generally care about in cases.
Design:
I like the design, the case opens nicely and generally stays shut, even without a magnetic closure. The stitching looks nice and all the ports are clear and able to be used. Wireless charging works as is should, including fast wireless charging.
There isn’t much to dislike here, unless you dislike the idea of a leather folio case, in which case why are you looking at this case?
Quality:
I’ve only had the case for a bit over a full day, but it feels like it should last quite a while, the only thing I’ve noticed so far is some scuffing on the leather, giving it an older look. I understand this is a quality that people sometimes look for in leather. The company claims it is handmade, and I have no reason to disbelieve them.
There is some discoloration on the lighter inside pieces already, leading me to believe they died the leather. Also the ear piece cutout of the felt on the front flap seems slightly misaligned. I’ve included pictures to show what I mean, it doesn’t seem to cause any issues with the phone so it isn’t a problem I would care much about.
Features:
There is a distinct lack of features here. The case does not auto turn on/off the screen and there is no card holder. In short the case is a case, and nothing more.
Overall:
For $25 it is a good enough leather case. I would say the price is about right, though if they included a way to auto turn on/off the screen I would be more inclined to call this a must buy. As it is, if you want a nice looking leather folio case, this is a good case for a fair (if slightly higher than I would like).
Pictures:
https://1drv.ms/f/s!AtJMszlYgr5NmygQ_J6G6t71VGxQ

_Dennis_ said:
This is my review of the $25 Benuo Galaxy S8 plus leather flip case:
I received a free case in exchange for an honest review.
First thing is first, the case is a good case, if you like the folio design and like leather. Personally I love the design, but leather isn’t something I generally care about in cases.
Design:
I like the design, the case opens nicely and generally stays shut, even without a magnetic closure. The stitching looks nice and all the ports are clear and able to be used. Wireless charging works as is should, including fast wireless charging.
There isn’t much to dislike here, unless you dislike the idea of a leather folio case, in which case why are you looking at this case?
Quality:
I’ve only had the case for a bit over a full day, but it feels like it should last quite a while, the only thing I’ve noticed so far is some scuffing on the leather, giving it an older look. I understand this is a quality that people sometimes look for in leather. The company claims it is handmade, and I have no reason to disbelieve them.
There is some discoloration on the lighter inside pieces already, leading me to believe they died the leather. Also the ear piece cutout of the felt on the front flap seems slightly misaligned. I’ve included pictures to show what I mean, it doesn’t seem to cause any issues with the phone so it isn’t a problem I would care much about.
Features:
There is a distinct lack of features here. The case does not auto turn on/off the screen and there is no card holder. In short the case is a case, and nothing more.
Overall:
For $25 it is a good enough leather case. I would say the price is about right, though if they included a way to auto turn on/off the screen I would be more inclined to call this a must buy. As it is, if you want a nice looking leather folio case, this is a good case for a fair (if slightly higher than I would like).
I guess this is nice
Click to expand...
Click to collapse

I have this case and the only thing I really dislike is holding the case open while taking a picture. As for quality it holds the phone nice and tight and this is NOT man made leather but real animal hide.

Didn't think it was man-made (fake) leather, but was hand made with real leather (not sewn by machines).
Sent from my SM-G955F using Tapatalk

Related

Bear Motion XOOM Case.

http://www.amazon.com/Bear-Motion-T...f=sr_1_28?s=pc&ie=UTF8&qid=1305441095&sr=1-28
How do we feel about this case? It looks like it's sturdy and should be awesome. I watched a few videos on the original iPad one, and well, they worked pretty swell and looked very, very nice. I feel as though this could be a definite purchase.
Does anyone have it and have opinions on it?
Not a big fan of any current leather cases for Xoom. All look kinda low quality and rough.
Honestly, I feel the same about all leather cases. I just haven't seen a good case with built in kick stand like any iPad case. This has the original case's design and I really like that idea. I wish it were a soft rubber instead of leather, but there's nothing I can do about that.
Just looked at the item. One thing I don't like is the plastic screen shield. I imagine it would collect and smash dust against the screen. I'd prefer it were open and use a screen protector, or not.
Just got this case in the mail. First there is no plastic cover for screen, that is a screen cover on the Xoom itself.
This case is really sturdy, feels great. Feels like real leather (advertised as real leather). The there are cutouts for everything., though when closed the lid blocks the charing cutout. When in standing mode, both orientations are great, the shallow one is perfect for typing (unlike the folio case from motorola) and the steep incline works well for movies(again unlike the folio the case). I got it for $16 + shipping and it is worth well more that the $40 case I got from motorola .

Seidio Dilex Case

Hey XDA,
I recently ordered this case to replace my Ringke Fusion (which I both like and hate) and hopefully I will like it enough to keep it as my long term case. I haven't noticed much as far as reviews for this particular case so I was thinking of doing one for it. I have a new qi charger coming with it so I should be able to test that and see if it adversely affects the glass screen protector I have on right now. If anyone out there is interested in pictures of the case on the phone or anything like that, let me know and I'll do my best to include them when I review it on Thursday, I'm a little bit of a case junkie and typically try out several for my phones during their life time, but this is the first higher end case I'll have for the N5 and I'm really excited to see how it turns out.
Seidio Product Page
moonDOOM
Probably no real reviews of this case because they're already well-known. Others have already posted, and I'll back it up, Qi wireless charging works perfectly with it. Simply the best cases you can buy. Also, the holsters are pretty fantastic.
I got the case in today and as apparently everyone knows already, this case is quality made. I previously had a Ringke fusion case on my N5 and liked being able to see the nexus logo, but hated the tpu layer and how the back collected dust every time it was put into a pocket. I decided to go with a more traditional 2 layer case and I thought that the Seidio Dilex looked the best out of the ones currently available.
Pros:
- After seeing the product in person, I'm immediately sold on this design. The case is much darker black than it appears on the website (bright lighting in their product photos) and the rubberized coating on the PC layer is the classic silky smooth texture that Seidio is known for and has used for years. On a side note, the other colors are actually really nice looking too if you prefer something other than black and it looks like they have the same texture coating. The case feels really good in hand because of the soft texture and the silicone actually feels really similar.
- The kickstand also adds just a little weight to the bottom of the phone and makes it somewhat easier to balance, hold and manipulate with one hand. Speaking of the kickstand, it's actually aluminum instead of plastic which is a nice touch. The best part is that the kickstand is spring loaded (slightly) to the outward position but also contains a magnet to hold it securely in place when not in use. It appears to be pretty well attached to the case so hopefully it will hold up over time.
- The ports are all pretty well lined up with the cutouts and they seem big enough to accommodate most cables.
- Qi charging works just fine, at least on the cheap chinese one I also got in today. NFC doesn't appear to be affected either, although I only tried once.
- I'm currently using a Nillkin glass screen protector and it appears that the silicone is soft enough not to interfere with the edges of the screen protector. May not be the same with other brands.
Cons:
- The only thing I can think of is that because the outer layer only presses the edges in the middle and corners, the silicone seems to be a little loose or saggy inbetween the "arms" of the outer shell. I'm hoping that settles into place over time but if it catches on my pockets too much, it might actually get worse.
- The sticky texture is great for grip, but also picks up a lot of dust, but that's not news to anyone who has used a silicone case before.
In conclusion, I'd probably give this case 4.7 out of 5 stars. I like just about everything about it but I wish the silicone they used was just a little less pliable.
Pictures of the Case
Sorry, I know the pictures are garbage (I had to take them with my old phone so the N5 could be in the case) but I'd be happy to answer any questions y'all might have.
moonDOOM
Looks real nice little too thick for my taste though.
Sent from my Nexus 5 using Tapatalk
This looks almost exactly like the generic thick kickstand cases that are being sold under various brands at various prices.
Dilex Case and Qi
Good morning. I wanted to follow up on your case experience with Qi charging I put this case on a Samsung Galaxy S5 and used a powerbot circular charging pad. I found that to get the charger aligned, I needed to prop the device up on the kickstand so it was a little firther from the pad, and I could not get a charging lock.
I'm trying to figure out if that is a function of the powerbot's charging signal or the anatomy of my Qi pad. Does your phone sit square on the charging pad? or is it propped up on the kickstand?
Thanks,
Marcva

[CASE REVIEW] TETDED Black Leather

Here is the product page: http://www.tetded.com/home/en/xperi...ria-z3-compact-d5803-d5833-caen-lc-black.html
I paid $30USD.
See images: http://imgur.com/a/AMxTZ
Unboxing
- Case
- Some documentation for warranty
- Nothing else
My thoughts
My first impressions of the case was the lovely leather look. The colour is a fantastic deep Washington Black.
The leather is not as plush as I was hoping. I feel as though the plastic skeleton which maintains shape is a bit too thick, compared to the leather. This doesn't compromise the leather feel, but I would have preferred a softer leather.
(Although, in saying that, there seem to be other cases for the Z3C from TETDED which look softer).
The inside fabric is about 1mm thick microfibre-ish. Its smooth, soft and feels hard wearing; good for something which will be touching my phone.
It fits well to the case, nice and tight. There is no play in the case, except for a very small movement in the bottom left corner of the case (not the top left, oddly).
It might have been nicer if the left hand side of the case covered the micro usb port cover, but thats just me. This doesn't take anything away from the structure of the case, I just thought it would look nicer.
The edges of the leather are well burnished and are flawless. The case feels great in the hand, and provides much needed friction on surfaces as well as while holding the phone.
One awesome thing about this case is that it allows use of the magnetic charger (if the small plate is removed; see pictures).
In terms of the purchasing of the case, it took them a few days to send, and overall I think I received it a week after order - not bad.
Pros
- Fits nicely
- Feels lovely in the hand
- Adds much needed grip
- Works with the magnetic charger!
- Its leather?
Cons
- Not a soft leather
- Not much else really
My rating: 8.5/10
Final words
Overall, I think TETDED did a pretty good job on this case. My one gripe is the lack of softness of the leather, but I suppose this would add thickness to the case (although, I think I would pay the price gladly).
TL;DR: Good case, could be softer, works with the magnetic charger. Nice.

[Review] Pitaka Aramid MagCase & MagMount

I’m the type of person that will seek out the highest quality accessories, no matter the price. In recent year I’ve gravitated towards thinner cases that retain the original feel of the phone.
I’ve tried cases from all of the brands available, from PDAir many years ago, to the UAG range back when I had a Galaxy S3 and then the Spigen range around the time I got a Nexus 6P.
Pitaka is totally new to me. I spotted them when people on Reddit and XDA were discussing case for the iPhone X and Pixel 2. Immediately I was drawn to the look of the case as well as promises of premium materials.
Something that caught my attention was the inclusion of magnets within the case itself. This is the first company I’ve seen do this and it potentially introduces a hassle-free solution where you don’t need to faff about with loose magnets and checking case compatibility. You buy the case, you buy the mount and that’s it.
PITAKA ARAMID MAGCASE
https://i.imgur.com/2RaOHOv.jpg
https://i.imgur.com/aqtvQtN.jpg
https://i.imgur.com/CDEmyib.jpg
https://i.imgur.com/4iFErqz.jpg
PROS
The case comes in an attractive box, made of thick cardboard. It makes for a rather pleasant unboxing experience.
The case has magnets (used for the car mount) hidden inside it. This is a huge plus for me as I have avoided using magnetic car mounts due to having to use metal plates which could scratch the phone, but there’s no danger of that here. The fact that they’ve managed to build such a thin case and hide those magnets within is amazing.
The case feels incredible due to a soft-touch coating on the back. This also gives the case a decent amount of grip.
The case works really well with the Whitestone Dome glass screen protector and would probably work well with other edge to edge protectors.
The case is incredibly thin. My previous case is the MNML thin case and the Pitaka case feels about the same in terms of thickness.
Active Edge still works with the case. I didn’t need to adjust the sensitivity at all.
There’s no branding visible on the case. I really appreciate this as it gives the case a clean and professional look. People could easily assume that it’s an official product by the phone manufacturer.
The case looks good enough that I’ve had people comment on the look of the case rather than the look of the phone!
CONS
Due to the materials used to produce the case it picks up quite a lot of fingerprints and they don’t rub off easily. Even with a microfibre cloth I had to rub it quite hard to get the fingerprints off. However, when using an alcoholic wipe they came off with ease.
For those that want something minimalistic and stylish I’d say that this is the best case for the Pixel 2 XL!
PITAKA MAGMOUNT
https://i.imgur.com/htyLvhv.jpg
PROS
The part of the mount that connects to the vent is a firm rubber, so it’ll hold the vent fin securely and won’t damage anything.
I personally love the look of the mount. It has a stylish carbon fibre texture which looks and feels great. It’s quite minimalistic in a way too, which is a nice change compared to some of the bulky mounting solutions I’ve used in the past.
Overall, the build quality is excellent. It just feels solid and high quality overall.
The mount is sturdy when tightened, there’s no unwanted movement or drooping.
The magnets in the mount are amazing. When I first unboxed the product I attached my phone and shook the mount as much as I could, it didn’t drop off.
The case can find the mount magnets quite easily, I don’t have to keep moving it around to get it to attach.
CONS
I honestly didn’t come across any!
I love the two products individually but what I find incredibly unique is how well the products work together. It’s the true definition of seamless, so much so that I feel that I wouldn’t be able to go back to another case due to how used to this setup I’ve become.
ProfessorParmar said:
I’m the type of person that will seek out the highest quality accessories, no matter the price. In recent year I’ve gravitated towards thinner cases that retain the original feel of the phone.
I’ve tried cases from all of the brands available, from PDAir many years ago, to the UAG range back when I had a Galaxy S3 and then the Spigen range around the time I got a Nexus 6P.
Pitaka is totally new to me. I spotted them when people on Reddit and XDA were discussing case for the iPhone X and Pixel 2. Immediately I was drawn to the look of the case as well as promises of premium materials.
Something that caught my attention was the inclusion of magnets within the case itself. This is the first company I’ve seen do this and it potentially introduces a hassle-free solution where you don’t need to faff about with loose magnets and checking case compatibility. You buy the case, you buy the mount and that’s it.
PITAKA ARAMID MAGCASE
https://i.imgur.com/2RaOHOv.jpg
https://i.imgur.com/aqtvQtN.jpg
https://i.imgur.com/CDEmyib.jpg
https://i.imgur.com/4iFErqz.jpg
PROS
The case comes in an attractive box, made of thick cardboard. It makes for a rather pleasant unboxing experience.
The case has magnets (used for the car mount) hidden inside it. This is a huge plus for me as I have avoided using magnetic car mounts due to having to use metal plates which could scratch the phone, but there’s no danger of that here. The fact that they’ve managed to build such a thin case and hide those magnets within is amazing.
The case feels incredible due to a soft-touch coating on the back. This also gives the case a decent amount of grip.
The case works really well with the Whitestone Dome glass screen protector and would probably work well with other edge to edge protectors.
The case is incredibly thin. My previous case is the MNML thin case and the Pitaka case feels about the same in terms of thickness.
Active Edge still works with the case. I didn’t need to adjust the sensitivity at all.
There’s no branding visible on the case. I really appreciate this as it gives the case a clean and professional look. People could easily assume that it’s an official product by the phone manufacturer.
The case looks good enough that I’ve had people comment on the look of the case rather than the look of the phone!
CONS
Due to the materials used to produce the case it picks up quite a lot of fingerprints and they don’t rub off easily. Even with a microfibre cloth I had to rub it quite hard to get the fingerprints off. However, when using an alcoholic wipe they came off with ease.
For those that want something minimalistic and stylish I’d say that this is the best case for the Pixel 2 XL!
PITAKA MAGMOUNT
https://i.imgur.com/htyLvhv.jpg
PROS
The part of the mount that connects to the vent is a firm rubber, so it’ll hold the vent fin securely and won’t damage anything.
I personally love the look of the mount. It has a stylish carbon fibre texture which looks and feels great. It’s quite minimalistic in a way too, which is a nice change compared to some of the bulky mounting solutions I’ve used in the past.
Overall, the build quality is excellent. It just feels solid and high quality overall.
The mount is sturdy when tightened, there’s no unwanted movement or drooping.
The magnets in the mount are amazing. When I first unboxed the product I attached my phone and shook the mount as much as I could, it didn’t drop off.
The case can find the mount magnets quite easily, I don’t have to keep moving it around to get it to attach.
CONS
I honestly didn’t come across any!
I love the two products individually but what I find incredibly unique is how well the products work together. It’s the true definition of seamless, so much so that I feel that I wouldn’t be able to go back to another case due to how used to this setup I’ve become.
Click to expand...
Click to collapse
I have had one since they were first released back in October/November. Love it with my mount. There's a rather large thread already here in the accessories forum. https://forum.xda-developers.com/pixel-2-xl/accessories/pitakas-thinnest-protective-kevlar-t3702842
I took a few pics for someone on reddit a week or two ago. https://imgur.com/a/rvDXV

Pixel 3 XL - Multi Case Review

So, as I have done with my last few phones I have obtained many of the most well-reviewed cases (and some not so) to see what I like best. I thought I would share my thoughts so that others might get some better insight into what's out there. I realize that cases are very subjective based on your specific goals for a case and your general tastes. With that in mind I’m just going to start by mentioning a bit about my own habits/likes so you can get an idea of what might influence me.
Like many (I think) I like to have a case that is as minimal as possible which still offering a level of protection against drops and bumps. I am definitely not an “otter-box” type guy who likes huge rugged cases with built-in screen protectors. Especially as phones are getting larger and larger I can barely fit them in my pocket even with minimal cases. To that same point, I tend to like very “sticky”/"grippy" or tactile cases as these large phones are also hard enough to hold as-is. I suppose if you have really large hands this might not be as much of an issue, but for me it tends to rule out a lot of cases that look great but feel “slippery.”
I tend to do a "stick test" where I lay the phone in the case flat on the palm of my open hand and then slowly rotate the phone to a vertical position The longer it takes for the phone to not slide off my hand, the better. Some cases will allow me to stand the phone basically straight up gripping my hand without me using fingers at all. Results are not totally scientific as the temperature/sweat on my hands can influence the outcome to some degree but overall I get a better than/worse than result.
As a real-life example of what I prefer, refer to my last 2 phone case choices:
HTC M8 - SUPCASE Unicorn Beetle Premium Hybrid. I loved everything about this case for the M8. It looked awesome, had just the right amount of protection while still being a slim case. The material isn’t the stickiest but based on the curve of the M8’s back, which this case follows, it creates a great curve in your hand for a fantastic fit/group.
LG V20 - Ringke Fusion Smoke/Clear Case - Unfortunately they didn’t make the same SUPCASE for my V20, so I went with this one. It also is a hard polycarbonate back (but not too hard/thick) with a more flexible TPU bumper. It has a great amount of tactile stickiness and the phone never slips from my hand.
As evident, I’ve tended to gravitate towards relatively clear cases on my last phones because the phones themselves have been great looking phones (brushed metal all around, etc). I purchased the Pixel 3 XL black, which while a nice looking phone really isn’t anything spectacular and I think the right case may even improve the looks (something I didn’t think was true on my above 2 phones).
Taking the above into account, below are my reviews/thoughts on the cases I’ve tried for the 3 XL. I’ve divided them into several categories for easier comparison which you will find below:
Full TPU Cases
I don’t normally like full TPU cases because they don’t offer much protection and tend to feel “squishy” due to being made totally of flexible material. Still, they are light-weight and the clear ones offer a good view of the phone, so I decided to try a few out.
Cimo Slim Grip ($8) - Like all the clear TPU cases I reviewed, they still have a yellowish tinge right out of the box. It’s hard to know if the cases will yellow more over time, but you can definitely see the yellow in the thicker parts (and around the cut-outs). Once the phone is in the case it is harder to see this, and since all the clear TPU cases suffer from it I supposed I can’t dock too many points.
As a TPU case it is super flexible and super tactile/grippy. Unfortunately the inside of the case is as well which makes getting it into the case evenly is difficult. There is barely any lip to the front of the case, so not much distance between the screen and a flat surface. Additionally the lip seems uneven, and not sure if this is manufacturing or simply because it is difficult to line the phone up perfectly because of the grip of the TPU. Buttons (volume/power) have good feedback, overall what I would expect for an $8 TPU case that offers mostly scratch protection.
Totallee transparent case ($28) - Almost identical to the Cimo in all regards that a clear TPU case can have. It does perhaps a slightly better fit and quality (though still yellow tinge). It is incredibly flexible, more-so than the other TPU cases. The largest downside (for my needs) is it has virtually no lip. If you place the phone face down on a flat surface I’m sure that the screen will make contact in many situations. Overall is is a nice “barely there” case that doesn’t add bulk or size, but for $29 it is really hard to recommend over the Cimo.
Spigen Liquid Crystal ($11) - A combination of the Cimo and Totallee cases. It has a better lip than the Cimo and a better fit and overall quality. If you want a low-profile clear TPU case I think this is the one to beat.
Dretal Carbon Fiber Shock Resistant Brushed Texture Soft TPU ($8) - Unlike the other pure TPU cases this one is a brushed metal/carbon fiber black instead of clear. The case design is nice, but doesn’t seem the best quality, with minor imperfections in the melding of the parts. Also the carbon fiber pads on mine looked scratched/hazy out of the box on parts of them, something I’m sure will happen over time making this case not look as sharp. Apart from look, unremarkable in any other way (good or bad). While this is a very flexible TPU case (making the phone super easy to put in/get out), it isn’t a very grippy case and I found it slipping out of my hands more than the others. This would appear to be a “knock-off” of the Spigen Rugged Armor - a case not available when I was ordering my lot. For the small difference in price if you can get your hands on one I’m not sure why you wouldn’t opt for the Spigen.
Polycarbonate (PC) - TPU Hybrid Cases - Light-weight
These are the types cases I usually prefer (along with the mid-weight ones below). Their harder back brings some rigidity and strength to the case and the rubberized bumpers provide some additional protection. Overall I find these superior to pure TPU cases while in some cases adding very little additional bulk.
MoKo ($7) - This is like the PC/TPU version of the Cimo from above. Decently grippy, though not as much as some of the other cases in this category. It is stiffer with the PC back and the rubberized edges are also pretty hard. The buttons are responsive but like a lot of cases in this and the TPU category they volume button is not split (up/down). This can make it difficult to tell which direction volume you are pressing. Lip is pretty good - possibly the highest in this category. There are little nubbins on the back corners that raise the case slightly from the ground. While these might help protect the camera by raising it a bit more, I wonder if they act as a buttress to strengthen the corners, they seem largely unnecessary though a few models incorporate similar designs.
VRS Crystal Chrome ($12) - While more expensive I found this to be mostly the same as the MoKo, but lesser quality. The lip is also the lowest out of the cases in this category, though to be fair the case may be the thinnest (though not by much). Nothing really here that can make me recommend it over the MoKo, especially at this price.
Ringke Fusion ($9) - Very similar to the MoKo in all respects. Might be a little better quality, but I could just be influenced by the brand. Volume control is also one button, but buttons seem a bit friendlier to use. Like the MoKo it has little nubbins on the bottom corners (more stylized). Also has a place for a lanyard (if that interests you). I think this would be my pick in this category if only for the reason that you can get it in a “smoke” color. Even with a black phone I feel the smoke adds a bit of “texture” to the look and prevents yellowing better. I don’t think the Pixel is pretty enough that it needs a completely transparent case anyway.
Spigen Ultra Hybrid S ($14) - Basically identical to the Spigen Liquid Crystal but with a stiff PC backing. It has slightly larger buttons and a kickstand. Personally, I don’t like the way the kickstand offset feels in my hand and I don’t think I’d get much use out of it. I don’t have much experience with the kickstands and they seem a bit flimsy to me. I’d be worried about it breaking off and then just having a busted case. Volume button is also two-parts, which makes feeling for them a bit easier. Once or twice I felt this case was a bit “squishier” in my hands, but the phone might not have been seated well. If you want a clear case with a kickstand, this is probably a good bet.
Polycarbonate (PC) - TPU Hybrid Cases - Mid-weight
Along with the light-weights, I prefer these cases. It is often a fine distinction, but I tend to feel these cases have a bit more “padding” offering some more protection with a very minimal change in footprint. But, this designation is a bit subjective so you could group these with the lightweight above - the main difference being these aren’t all transparent all around.
SUPCASE Unicorn Beetle ($13) - I really wanted to love this case as it is what I had on my HTC M8. Unfortunately, while the back is highly tactile, the rubberized side bumpers are pretty slippery. The bumpers give a good lip, but they also extend around the back of the case a bit, creating what amounts to a small rear lip. This causes the back not to rest as snug in your hand causing the whole case less grippy. Additionally the power and volume buttons are basically flush with the case making it a bit difficult to find them easily (and also promoting a smoother/more slippery surface on the sides!). The buttons are responsive though and the case is really easy to swap on/off. It has a nice clean look and I think would offer a good amount of protection, but I don't think it is the winner for me this time around.
Ringke Fusion-X ($13) - Built like the Fusion but with some more meat on the edges, an overall stiffer case. A tad bigger all around than the Unicorn, and seemingly certified Mil grade tested. The design is more stylized - a “rugged” looking case while not being overly bulky. The texture of the design gives it some grip, which is good because otherwise it wouldn’t be very tactile. More defined volume buttons. Might be a competitor to Unicorn, except the sides are pretty slippery. It also has a lanyard hole.
This is probably a good choice for a more rugged look coupled with slightly more protection (at the expense of some added bulk). For me though the slipperiness of the case offsets the additional protection it might offer. I’d rather not drop it in the first place then have it be more protected when I do! But as a secondary “rugged” case for someone that doesn’t like overly bulky cases it might be a good fit.
UAG Plyo ($40) - A really interesting case. At first I thought it was the biggest in this category but it actually seems to be the same size as the Fusion-X (perhaps a hair smaller!). It is virtually the same size as the Unicorn Beetle and even the lightweight Ringke Fusion. Unlike these phones however it has straight, not beveled edges so it initially gives the appearance of it being longer, but it really isn’t (it might be a hair thicker, but when put side by side it is virtually unnoticeable). Seriously, I almost dismissed this case out of hand as being too large, but when I compare it again to other cases I was highly considering I see that it is similar in size.
It is Mil-spec tested and unlike the Fusion-X it is very grippy. Perhaps not as grippy as the Fusion, but a close second. As you also might expect with a thicker case the buttons and side “squeeze”seem a bit harder to press, but not unworkable (and Active Edge sensitivity can be adjusted). It has a smoky tinge to the color and a honeycomb pattern at the bumpers give it a cool look. The sides and back have a slight inward curve which is visually different and I think actually helps with the grip. While I haven’t tested any of these cases with wireless charging, UAG states that this is compatible - which would have been one of my only concerns for a "rugged" case. At $40 the price is relatively very high and this may be the only reason can’t recommend the case, or at the very least choose it for myself.
Polycarbonate (PC) - TPU Dual Layer Cases
I don’t prefer these types of cases, I find them to usually be bulkier and not usually provide more protection above the mid-weight single layer cases. They are almost never clear/clear-ish cases either though their dual layers can offer some interesting visual designs. My wife happens to be a fan of these, which is why I ordered a couple to check out.
Spigen Tough Armor ($17) - Honestly, I didn’t even realize this was a dual-layer case until I was reading some more about it for writing this review. I had it placed with the mid-weight cases above. Functionally I find it very similar to the Unicorn Beetle, despite it’s dual layers. It is basically the same size although with beveled instead of rounded edges. It was easy to put on/take off with both layers attached (part of the reason I didn’t realize it was dual layer).
The outer layer wraps around the middle and sides, but does not offer more protection around the corners. As the name implies, this is supposed to be “tough” and has some level of Mil-grade testing. I’m not sure I feel it would withstand that much more punishment than others in the mid-weight category though. It has the same flat buttons that the Unicorn does but the materials are not as grippy and can at times be quite slippery. Aesthetically, a very nice looking case but the all plastic kickstand mechanism seems flimsy. The kickstand does removes easily and they probably should have provided at least 2 spares with the case (which would have cost them pennies to do).
Spigen Neo Hybrid ($14) - Overall a really nice looking case - almost identical in size to the Tough Armor (perhaps a hair smaller all around). The outer layer wraps around the edges/corners of the phone than the middle like the Tough Armor. Unlike the Tough Armor, the edges are rounded as opposed to beveled. Volume/power buttons are easy to feel with good tactile feedback. I don’t think the thin outer shell is offering much more protection than the rubberized bumpers on the mid-weights above. It is however more grippy than the Tough Armor and also apparently has a Mil-spec rating. Unfortunately after several tries I still couldn’t get the outer shell to sit flush with the camera outline (it was raised around the camera's lower edge). Apart from that last issue, if you like dual layer cases and like the look of this one, I can recommend it.
Tudia Merge ($9.5) - Like the Spigen Tough Armor, the outer shell wraps around the middle and sides. It seems mostly aesthetic, but the metal look is very appealing and surprisingly not as slippery as the plastic on the Tough Armor. Buttons are a little stiff but overall feel good and the lip is sufficient. You can get it on and off easy without removing the back. This ended up being my wife’s pick.
BentoBen Slim Glitter Bling ($10) - This is mostly a “glamour case”, albeit a decently put together one. Quality is good although the paint on the edges will wear over time. On average the same length and width as many of the lightweight/midweight cases but a little thicker. Unfortunately this thickness doesn’t give it a superior lip (though it is sufficient). The buttons are a bit too recessed for my liking, but not stiff. The outer shell is actually pretty grippy due to the texture. We ordered this one only because my wife had the same one for her V20 and still she is opting for the Tudai this time around.
Miscellaneous Cases
Only one case doesn’t fit into the above categories. I ordered only to complete all the Spigen cases available for my phone to try it out.
Spigen Thin Fit ($10) - Basically a “non-case.” A small black clip-on that seems designed simply so you can use a magnetic holder without having to attach the magnet sticker to your phone directly. It adds virtually no bulk, but is slippery and would offer very little protection except from back scratches. Unremarkable for what it is and if you want something to prevent your keys from scratching the back of the phone it will work and probably slide in and out of your pocket easier than a TPU case. As for me, I’ll pass.
Well, that's all the ones I've tried out. Other well reviewed cases that I couldn't find on Amazon which I wanted to try:
Caseology Legion Series
Spigen Rugged Armor
Incipio DualPro Pixel 3 XL
Tech21 Pure Clear
Speck Presidio Stay Clear
For now, I think my choice is the Ringke Fusion, just like I had on my V20. Perhaps if the UAG drops in price I will move over to it.
If I check out any more or have any updated thoughts I'll update the thread.
I'll probably be hanging onto these cases for about a week before return, so please feel free to ask any specifics and I will try to get an answer.
So you buy these, review them, then return them?
airmaxx23 said:
So you buy these, review them, then return them?
Click to expand...
Click to collapse
Yes.
Most of these aren't available anywhere except online so there is no way to find if you will like a case without actually trying it.
The $10 I will pay to ship them all back to Amazon is worth it to find a case I like.
Don't forget Spigen Slim Armor and Google fabric cases
airmaxx23 said:
POST DELETED BY MOD
Click to expand...
Click to collapse
he's not, otherwise there wouldn't be a return policy. or, they would be sold in b&m stores where they could be tried on first, which would likely Jack up then price 2-3x. these cases cost pennies to make, maybe the best ones break into the very low dollars. returns are the cost of doing business.
Thread cleaned. Please keep comments on-topic. Disrespectful opinions about how the OP goes about acquiring the cases for reviews aren't needed.
Had @kellybrf not commented, I would have said the same. He's not taking advantage of any system. Amazon's return policy is interesting in how it's handled. If he's paying a return price, that means he's selecting the option that doesn't include the words "defective" or "not as ordered", etc. He's being honest with them about why he's returning them, otherwise he wouldn't be paying for return shipping.
The rugged armor is on amazon, did you not see it? would be curious how it compares as i use on all my phones
Thank you for the well-written review. It is very appreciated. My Pixel 3 XL is due to arrive on Monday the 17th. So I am in search of the required accessories. I require excellent protection as I drop things quite often ?
I have the Incipio DualPro. Love this case. Fits perfect, and has a perfect rubbery/grippy feel.
https://incipio.com/cases/more-devices/google-smartphone-cases/dualpro-google-pixel-3-xl-case.html
I've tried a few cases and, not speaking about phone protection, but I have found that none of the ones I've tried (all three were Spigen) are compatible with the Pixel Stand. The cases make the phone too thick to remain vertical on the stand.
I bought a otter box defender case the same time I got my class....I dropped the phone twice since and I have zero damage. Worth the money....not that bulky...
Uag plyo It is a very nice case with great protection. Wireless charging works perfectly. great case.
oneandroidnut said:
The rugged armor is on amazon, did you not see it? would be curious how it compares as i use on all my phones
Click to expand...
Click to collapse
Long time replying, just wanted to state that the case was not available on Amazon when I was ordering cases. It may very well have gotten back into stock afterwards.
I am still using my Ringke Fusion case and I don't have any major complaints. The tactile/sticky nature of the case has been in line with my previous cases which I purchased for similar reasons.
I would still like to get the UAG Pylo, but not until I can find it for ~$15 (which may never happen). As I have never dropped the phone so far, I'm not sure the slightly extra protection of the UAG would even be necessary, but it is a distinctive looking case.

Categories

Resources