Develop Bugs

For Singapore user. Root + flash jme v.4 + data 3G

Hi,
Finally got my galaxy tab to work after 6 hours. Now it is running well.
As it is 4 am here, i will post a guide for Singapore users once i wake up as i have meet with problems during the whole process.
Luckily, all information can be found on this forum but just that you will have to read through 20 plus pages from different topic in order to get the answer.
Super happy with my phone now!
*just another newbie* =)
Sent from my GT-P1000 using XDA App

Sorry to steal your thread. Singaporean tab user here as well. I think we should constantly update this thread for singapore users. I was running dxjm4 up til this morning when i decided to flash to roto-jme. spent the last few days reading the thread and considering whether to upgrade or not because of the lack of information for singapore users. so i decided to take the plunge and just go for the upgrade no risk no gain. my tab got stucked at the samsung logo after it auto rebooted but it was fine after i manually rebooted it
what i did was to upgrade from jm4 instead full flashing my tab. it turned out fine so far but there's one thing that puzzles me. the apps that roto mentioned were removed are still in my tab such as daily briefing etc.. do u have this problem as well?

Not Too Sure... I am new to Galaxy Tab or rather Android =P
But i suggest you do a full flash again.
i wasn't ready to even root my device initially as i only gotten my Tab on Saturday 7th Jan 2011.
One thing that actually forced me to root and flash the rom is the stock version whether bug or not i just couldn't sync with my company exchange 2010, which is critical for me.
Nonetheless, i haven't tried the jme v4 as yet (I suppose) as i did not know how to get it to work.
All i did was follow:
http://forum.xda-developers.com/showthread.php?t=895827
And all went well, except that Data doesn't work.
Thoughout the whole process i did not use the file name "Roto-JME-Full-v4"
which set me thinking whether did i actually do the right thing.
One thing is most of the stock app was gone, baseband was change to I9000UGJK3, Kernel Version 2.6.32.9 [email protected] #1 and Build number is Froyo.XXJME.

HCgoh said:
Not Too Sure... I am new to Galaxy Tab or rather Android =P
But i suggest you do a full flash again.
i wasn't ready to even root my device initially as i only gotten my Tab on Saturday 7th Jan 2011.
One thing that actually forced me to root and flash the rom is the stock version whether bug or not i just couldn't sync with my company exchange 2010, which is critical for me.
Nonetheless, i haven't tried the jme v4 as yet (I suppose) as i did not know how to get it to work.
All i did was follow:
http://forum.xda-developers.com/showthread.php?t=895827
And all went well, except that Data doesn't work.
Thoughout the whole process i did not use the file name "Roto-JME-Full-v4"
which set me thinking whether did i actually do the right thing.
One thing is most of the stock app was gone, baseband was change to I9000UGJK3, Kernel Version 2.6.32.9 [email protected] #1 and Build number is Froyo.XXJME.
Click to expand...
Click to collapse
i am new to android too and this is my first android device. your baseband is weird? I9000? which firmware did u flash???

Root devices *Important Points
And Yes i woke up...
Anyway i do not gain credit from the guide itself as everything can be found in this forum. If you want to thank people, please thank the people that writes the program and the trial & error people if you find my thread useful. I am just consolidating all the steps that i used to flash my Tab, important things to take note of and etc...
Step by step guide to Rooting:
Please read
http://forum.xda-developers.com/showthread.php?t=812367
*Important points to Note when Rooting"
Process:
1) Connect your galaxy tab with debugging mode disabled and sync with Kies even once - You must be damn sure Kies can connect to your phone
2) Disconnect it and enable debugging mode from Settings>Applications>Development>USB Debugging
3) Connect the tab again to PC and click on home button so that Tab comes out of Kies connection - I found that after USB Debugging is turn off, Kies can still find your phone but it will just appear as Connecting... on the top left hand side of Kies. (I left my Kies on throughout the process)
4) Launch SuperOneClick.exe
5) Click on root and wait for 5-10 Mins - it stated 5 - 10 min but it took like 5 - 10 sec for SuperOneClick to prompt me saying that device is rooted.
And that all for Rooting whole process took me about 5 min Including all the reading. (Simple Great Job by SuperOneClick!)
Now comes the slightly complicated part: Flashing New Roms
Below is the thread that is used
1) http://forum.xda-developers.com/showthread.php?t=894763
2) http://forum.xda-developers.com/showthread.php?t=895827
What i did was:
1) Download OdinV3 1.7 (Provided in the thread 895827)
2) Download Addon-JME-Modem.zip (http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/)
3) Download P1_add_hidden.pit (http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/)
4) Download Roto-JME-FmtIntSD.zip (http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/archive/)
Additional:
I also downloaded (But till now i have not use any of the file below)
1) Roto-JME-FmtIntSD-v2.zip ( http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/archive/)
2) Roto-JME-Upgrade-v4.zip ( http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/)
Why is it not used, i myself is not too sure. For FmtIntSD alot of people is asking which is it to use as there are 2 different version 1 & 2 (i Suppose).
I have used the Version 1, as the time posted in the FTP link seem to be later than Version 2.
Also as thread http://forum.xda-developers.com/showthread.php?t=895827 shows in the screenshot, under tab CSC: Addon-JME-Hidden.Tar, this file is missing plus confirmation from the thread saying that it will fine without it.
Once downloaded, it is time to get to business =)
Steps i took:
1) Startup Odin
2) Connect Galaxy Tab to Kies make sure Kies is able to connect to the device and is able to Sync with device (Toggle with the USB Debugging option Either On or OFF) *My kies is never turn off from the start Rooting to Flashing* i think in order for Odin to work properly, Kies must be able to detect the device is been plugged in. (Just my Thought)
3) At this point of time Odin will also detect the device been plugged in as show in the screenshot provided in thread 895827. The yellow box will appear stating COM10 or 11 or 12 (DOesn't matter what com Number)..... Left hand bottom of ordin will also show Added!
Checked Make sure and double checked.... Yeah the next part!!!
4) Unplugged my phone from the USB
5) Off my phone
5) On my phone to get to the downloading mode (Hold Power Button and Volume Down Button)
6) Checked my Odin, Bottom left log shows REMOVED!
Hell Ya exactly the same as the sceenshot.....
7) Plugged in my phone with the Downloading screen....
8) Waited.... Waited..... 5 min pass..... Windows 7 is still searching for "Gadget Serial Port" Odin didn't detect the device connected.... don't have to worry Windows 7 will eventually find the driver, just got to give it sometime (Just in case you meet with the same problem like i did, Windows 7 took almost 10 min for the device to be ready)
9) Check Odin, Bottom left hand log.... ADDED!
Almost there.....
10) Plant in all the .Tar file as show in screenshot (Thread 895827)
*Please make sure you unzip the .rar file the logo is similar to winrar icon once you unzip. Can get a little messy, what i did was unzip and delete the original zip file that i downloaded. Remember JME-Hidden.Tar is not needed, just leave it blank*
11) Tick the "Re-partition" in Odin
Now you are all ready to start, double check all the setting and click the "Start" in Odin... =)
12) Pray.... Pray... Pray....
Whole process took me about 5 min, Odin will show you the details as it is flashing, Installing and Bla Bla Bla.... Once it is ready, Odin will prompt you either Successful or Failed...
Phone will automatically restart. Just leave it till you see the main screen comes out.
* I Succeed on my first try, so if you fail i guess you got more reading to do than me, but i am sorry that i am unable to help if you fail at this point*
Now then all good, checked my phone all seem well... did a call to my house number, Working....
Now the complication that i faced: My 3G (data Services) is NOT RUNNING!!!!
Did a search on the forum and found a few threads that is helpful:
1) http://forum.xda-developers.com/showthread.php?t=901021
2) http://forum.xda-developers.com/showthread.php?t=845263&highlight=modem.bin&page=3
3) http://forum.xda-developers.com/showthread.php?t=847273&highlight=modem_bell_i9000
* I Have attached the modem.bin that i use to get my 3G working, but before you download the attachment please do a few check as stated below.Things to check if your 3G (Data Service) is not working:
1) APNs setting
Setting>Wireless and Network>Mobile Networks>Access Point Names
2) Select the Access Point Names and see if there is any setting inside.
3) If it shows "No Setting"
4) Tab on the bottom left hand corner of your galaxy tab, "MENU" button beside the "Home" buttom
5) select "Add APN"
6) Use the information below, key in whatever is there. Those that you don't know just leave it blank. (As long as your are in Singapore i believe you know which telco you are with)
StarHub (Singapore)
APN: shwap or shwapint
Leave user/pass blank.
M1 (Singapore)
APN: sunsurf
user: 65 pass:
user123
swirlyMMS :
MMSC and Proxy server settings MMSC : http://mmsgw:8002/
Proxy : 172.16.14.10:8080
MMS-specific APN Settings
APN: miworld
username:65
password:user123
SingTel (Singapore)
APN: internet
Username: 65IDEAS (or blank)
Password: IDEAS (or blank)
Once Key-in "MENU" button again and safe the setting, now go back to your APNs and check to see if you have selected the setting you key-in (Button on the right hand side will be "GREEN"
Now Wait & Pray that the logo "3G" or "H" appear on the top beside your signal strenght bar.
if no launch your dialer (Press Phone) and Dial *#2263# select "automatic" 1st option. (Select it once and exit by pressing "HOME" or "BACK")
Wait & Pray....
I believe this should get it going as under JME-Modem.zip, the modem should already be in.
__________________ I sincerely hope that you do not have to do the step below________________________________________________
If the 3G or H is still not showing after you tried the above step. Download the modem.bin (Attachment in this thread modem_bell_i9000.zip)
Then follow the step below:
1) Unzip the file
2) startup Odin
3) Browse for the Modem.bin, using Odin "Phone" Tab (File you unzip from the attachment downloaded from here)
4) off your phone and boot it up to the "DOWNLOADING SCREEN"
Checklist:
5) Re-partition is NOT tick
6) Odin detect your device
Hit "Start" and wait for your phone to reboot.
*I succeed with this flashing of modem, if you fail all i can say is good luck*
Once your phone is up, check on the APNs setting again (Key-in the details is there is nothing in the list) Check on *#2263# and set it as automatic.
Then End.....
Conclusion:
I use the exact same step for my phone, and get it going. I hope it helps you.
Again i would want to highlight that none of the above is by me, all information can be found in thread posted by other users. Please give thanks to them as they are the one doing the job, taking risk to try ROMs, Root and etc...
=) i hope my thread helps anyone with the same problem as me...
PS: DO NOT HOLD ME RESPONSIBLE IF THE ABOVE GUIDE DOESN"T WORK FOR YOU.

Hi Kay Kiat,
I Seriously don't know. See the steps i posted, i believe it is because i flash a i9000 modem in that is why my baseband is weird. =p
i believe all i need to do is to re-flash the Jme modem in, and it should be right.
But currently at work no time to try. haha
Best Regards

Hi guys, Singapore GT user here also. Looking forward to try out your guide.
EDIT: Just flashed Roto's JME-Full-v4 with repartition. All works fine. No modem flash required.

HCgoh said:
Hi Kay Kiat,
I Seriously don't know. See the steps i posted, i believe it is because i flash a i9000 modem in that is why my baseband is weird. =p
i believe all i need to do is to re-flash the Jme modem in, and it should be right.
But currently at work no time to try. haha
Best Regards
Click to expand...
Click to collapse
hmmm. my 3g/gprs seems okay.. i went from jj1->jm4 via kies then jm4->rotojme via flash.. my baseband is p1000dxjm2 (i believe this is from jm4 as i did not flash modem when i upgraded to rotojme). hmmm.. did u set your apn correctly?

Sg user here as well
Anyone managed to get chinese input up?
Sent from my GT-P1000 using XDA App

junchen said:
Sg user here as well
Anyone managed to get chinese input up?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
are you talking about the keyboard?

Hi,
wanted to share my experience from flashing this Rom.
The way I've done it is download the latest full version find in the ftp site (not the archive) directory and using Odin to fladh my tab. I also downloaded all the other files but did not use them.
Overall, this rom is good. It solved my exchange problem but i've lost a few things as well. There's no more chinese input and i'm no longer able to zoom and pinch on dolphin browser. Does anubody has any solutions to these problems?
Thx.
Sent from my GT-P1000 using XDA App

中文鍵盤及手寫
This is what I've been using in a US T-mobile Tab with Roto-JME & it's working fine! Enjoy
junchen said:
Sg user here as well
Anyone managed to get chinese input up?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse

xenomage said:
i'm no longer able to zoom and pinch on dolphin browser.
Click to expand...
Click to collapse
This was solved in another thread, maybe the Roto-JME one itself. Theres a new version from Dolphin with the fix. You'll find it

xenomage said:
The way I've done it is download the latest full version find in the ftp site (not the archive) directory and using Odin to fladh my tab.
Click to expand...
Click to collapse
The Roto-JME-Full-v4 will format the internal sdcard only if it is corrupted. So you can shorten the steps to just flashing that one firmware. The ones in the archive are there just in case we needed to test something.

APN settings
Hi
Did you guys copy down the APN settings and did you manage to get your MMS working? I only have my 3G working. Was trying out the different settings to get MMS working too.
ps: for chinese input, can just install google pinyin. been using it since Im only android. swype does have chinese input but the one on the tab doesnt have it. I was testing the beta using my hero and i can do chinese input using the swype keyboard. i wonder if there is anyway to update the swype version to the latest one released by them.

Chinese input
xpgroup said:
This is what I've been using in a US T-mobile Tab with Roto-JME & it's working fine! Enjoy
Click to expand...
Click to collapse
Hi,
this may sound kinda dumb but after i download and install the attached APK, nothing happens on the keyboard.
How is it supposed to work?
Thanks.

go to settings > locale and text > enable whatever keyboard you want. then rmb to change your input method whenever u wanna use the new keyboard

xenomage said:
Hi,
this may sound kinda dumb but after i download and install the attached APK, nothing happens on the keyboard.
How is it supposed to work?
Thanks.
Click to expand...
Click to collapse
You'll need to goto Setting-Locale and text, check the Penpower Input Method. After that, at any input screen, press & hold - then select the input method.

xpgroup said:
This is what I've been using in a US T-mobile Tab with Roto-JME & it's working fine! Enjoy
Click to expand...
Click to collapse
Thanks for the file, it works fine. Just the right hand side part of the keyboard is emtpy. I wonder if there is anything to adjust the scale.
Thanks.

Heres how to hard reset Sony Xperia Ion if you forgot your lock code

After having a hard time finding it , I was able to get help from Sony. So I hope this helps someone who , like me, could not get find a solution. If this helps you, click thank me.
To unlock your phone from the Pattern Lock, please follow the steps below:
Download PC Companion from Sony Website
Turn the phone off and disconnect it from the computer. Run the Software.
1. No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone" and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update). Please be aware that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose the Xperia Ion from the list (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next". Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC but not to the phone, then while pressing and holding the volume down key connect the cable to the phone and keep holding the volume down key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.).
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar". If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key. Wait for the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components".
a. Close PC Companion.
b. Install Java from: www dot java dot com
c. Start Pc companion again and try to do the software unlock process once more

Wouldn't that be easier if you just flash it with stock Rom using flash tool?

randy_c said:
Wouldn't that be easier if you just flash it with stock Rom using flash tool?
Click to expand...
Click to collapse
Wouldn't that be too easy?
In Soviet Russia ROM flash YOU!

nvm

Thk´s
Work for me thanks a lot
Sony Xperia Lte28at
Used Power + VolDown until vibrate 3 times then upgrade.

Thanks, worked for me on my Xperia SP

It is easier to flash using Flashtool instead of using Sony PC Companion or SUS which requires a net connection.. Just download the tft File and flash it using flashtool.:angel:

Thankx. This worked. Saved a friend's phone from the dreadful unlock pattern lockout. Most people are not aware of such rescue technique's so thankx a lot.

Worked for me
Thanks for the instructions! Worked great with Xperia X10i.

Thank you so much! worked on my Xperia SP too!

I have LT26i, which model should I choose?

xristosdino said:
I have LT26i, which model should I choose?
Click to expand...
Click to collapse
Xperia S or Xperia SL, both are same.

Mi Note 2 stuck on "Checking for updates" screen after a simple factory reset. Brick?

Mi Note 2 stuck on "Checking for updates" screen after a simple factory reset. Brick?
Hi all,
I have Mi Note 2 phone. It's never been unlocked or ROMed before (although it has been reflashed successfully via Xiaomi's own pushed updates). It is running MIUI 10.0.something (cannot access menus to verify exact).
Following a standard factory reset, I go through the normal setup screens such as 'language', 'region', 'wifi network' after which I am given the option to select "copy your data from an old phone" or "set up as new", no matter which I select, my phone goes to the next screen which shows "Checking for updates". Here it stays - endlessly...
I have tried a different wifi network but it does the same.
I have also tried selecting "copy your data" instead of "set up as new" but it does the same.
I thought I would try to install a new stock rom to see if that would fix the issue. However, in order to unlock with the Mi bootloader unlock tool (and then use their flashing tool), apparently I need to enable something under developer options - clearly impossible when I cannot get to any menus
The phone can be re-started into the fastboot screen but does this help me at all?
On the MIUI website I noticed the following in the tips and tutorials forum: How to install a MIUI update without unlocking the bootloader: https://en.miui.com/thread-3852597-1-1.html
The above got me slightly excited before I realised that I have no way to place a ROM into the ‘downloaded_rom’ folder in the internal storage of my device (as the article instructs). Note that the reason for this is that although a Windows explorer window does open when I connect the phone to my laptop, it is empty (i.e. you cannot see any files/folders in it). BTW - I know what causes that specific issue as that bug was present in the device ages ago - basically, the phone seems to default to be in USB charge mode and in order to see the folders in Windows Explorer, you have to go into developer options and manually change the USB mode and then change it back to MTP mode. Once that is done, you can see the files/folder structures. However, I cannot get to any developer options as I cannot get to Settings at all.
So my burning question is this: How can I re-rom this theoretically 'working' device, given the above constraints? Is there any way to do anything while the phone is in the fastboot mode perhaps?
Thank you for any help offered!
Cheers!

avmad said:
Hi all, I have Mi Note 2 phone...........
Click to expand...
Click to collapse
I don't have this device but, you should be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3839540
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Commodore 64.

Ibuprophen said:
I don't have this device but, you should be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3839540
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Commodore 64.
Click to expand...
Click to collapse
Thanks Ibuprophen - I'll give that a shot!

[GLOBAL] Unbrick fix

Following this new tutorial (ONLY for GLOBAL versions!) you can continue enjoying your Xiaomi Redmi Note 8 Pro, so...
Click to expand...
Click to collapse
LET'S GO!
You'll need:
1. Download the file to your PC "MiFlashPro" (v4.3.1106.23)
2. Download firmware stock "begonia_global_images_V10.4.2.0.PGGMIXM"
3. An authorized Xiaomi Mi Service account.
Download and decompress the stock firmware on your desktop "begonia_global_images_V10.4.2.0.PGGMIXM" and follow this steps:
1.1- Instal and run MiFlashPro.
1.2- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool\mi), execute as administrator the file "account_auth.exe" and log into an authorized Xiaomi service account.
1.3- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool), execute"flash_tool.exe".
(The program will open and you will have to select three files)
2.1- Download-Agent: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin)
2.2- Scatter-loading File: On your desktop, inside the folder "begonia_global_images_V10.4.2.0.PGGMIXM.... images", is called MT6785_Android_scatter.txt
3.3- Authentication File: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/auth_sv5.auth)
1.4- Click on the "Download" button
1.5- With the phone turned off... connect the USB cable to the PC (ONLY TO THE PC, the other end you still don't connect).
1.6- Press the VOL + button on your phone and now connect the cable to your phone meanwhile you press the VOL + button
1.7- The firmware flashing process will start, wait a bit.
Now you can enjoy again your Xiaomi Redmi Note 8 Pro

klurosu said:
LET'S GO!
You'll need:
1. Download the file to your PC "MiFlashPro" (v4.3.1106.23)
2. Download firmware stock "begonia_global_images_V10.4.2.0.PGGMIXM"
3. An authorized Xiaomi Mi Service account.
Download and decompress the stock firmware on your desktop "begonia_global_images_V10.4.2.0.PGGMIXM" and follow this steps:
1.1- Instal and run MiFlashPro.
1.2- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool\mi), execute as administrator the file "account_auth.exe" and log into an authorized Xiaomi service account.
1.3- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool), execute"flash_tool.exe".
(The program will open and you will have to select three files)
2.1- Download-Agent: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin)
2.2- Scatter-loading File: On your desktop, inside the folder "begonia_global_images_V10.4.2.0.PGGMIXM.... images", is called MT6785_Android_scatter.txt
3.3- Authentication File: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/auth_sv5.auth)
1.4- Click on the "Download" button
1.5- With the phone turned off... connect the USB cable to the PC (ONLY TO THE PC, the other end you still don't connect).
1.6- Press the VOL + button on your phone and now connect the cable to your phone meanwhile you press the VOL + button
1.7- The firmware flashing process will start, wait a bit.
Now you can enjoy again your Xiaomi Redmi Note 8 Pro
Click to expand...
Click to collapse
Where can we get authorised account for free

girishjangir7 said:
Where can we get authorised account for free
Click to expand...
Click to collapse
sadly there is NOT auth accounts for free

I think that there already was a guide describing this process. But thanks anyway.

polfrank said:
I think that there already was a guide describing this process. But thanks anyway.
Click to expand...
Click to collapse
There is NO guide for that.
Or you have a partner's Xiaomi business or you must to spend 200 bucks (more or less).
One of this persons will CREATE an service authorized account for you.
That's it
send from an RMN8 Pro (xiaomi.eu custom rom)

klurosu said:
There is NO guide for that.
Or you have a partner's Xiaomi business or you must to spend 200 bucks (more or less).
One of this persons will CREATE an service authorized account for you.
That's it
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
I meant this thread in XDA:
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
which explains basically the same thing.

klurosu said:
There is NO guide for that.
Or you have a partner's Xiaomi business or you must to spend 200 bucks (more or less).
One of this persons will CREATE an service authorized account for you.
That's it
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
Huh, it's not just binding your PRIVATE pc with your Mi account. Auth_whatever.exe allow me to login without any errors, ready to flash message not red unauthorised account warning.
I think my account authorized because either I plead to them for giving me authority to FLASH when on RN3PRO BIG MESS CASE, I must apply form in CHINESE (there was tutorial because I dunno any Chinese). I need one because very hardbrick after flashing alpha rom, yes one dead phone with no fastboot / recovery revived :silly:
Either that or because my account bonded and already unlock dozens different models devices (I am reseller, some people especially old ppl and technology illiterate ones let me managed their phones account).
Binded account unfortunately won't be able to be used on other pc. I got a notice that I will only got limited access for a week or so if I change the pc I Binded, so sharing is impossible.
If you ever ask authority to flash in Chinese and got accepted (I need to wait 5 days after submitting request) chance you got one authorized account

Hello,
I tried to use my standard mi account, just in case (spoiler, didn't work) and the download process is stuck at the state it is just before pluging the phone. I mean, pluging the phone does not start anything, but still my computer sees the phone. The flash tool does not display any error about authorization.
Does anyone know if it's a normal behaviour ? It sounds a bit strange not to display any error.

ScarletVeil said:
Huh, it's not just binding your PRIVATE pc with your Mi account. Auth_whatever.exe allow me to login without any errors, ready to flash message not red unauthorised account warning.
I think my account authorized because either I plead to them for giving me authority to FLASH when on RN3PRO BIG MESS CASE, I must apply form in CHINESE (there was tutorial because I dunno any Chinese). I need one because very hardbrick after flashing alpha rom, yes one dead phone with no fastboot / recovery revived :silly:
Either that or because my account bonded and already unlock dozens different models devices (I am reseller, some people especially old ppl and technology illiterate ones let me managed their phones account).
Binded account unfortunately won't be able to be used on other pc. I got a notice that I will only got limited access for a week or so if I change the pc I Binded, so sharing is impossible.
If you ever ask authority to flash in Chinese and got accepted (I need to wait 5 days after submitting request) chance you got one authorized account
Click to expand...
Click to collapse
Could you pm me from where you got the Chinese application form and tutorial? (any website address?) I need it badly, my RN8PRO bricked

Auth Account
klurosu said:
sadly there is NOT auth accounts for free
Click to expand...
Click to collapse
Where can we buy an authorized mi account officially

Thread cleaned
Please do not recommend/discuss/advertise paid remote unlock services on XDA as we do not support such business.
Please read the FORUM RULES especially those:
13. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Thank you for your understanding.
strongst
Forum Moderator

Hi, my r8 pro has bricked recently, i'm really scared, can you help me? i already tried these options:
°boot > recovery = black screen
°boot > fastboot = black screen
°boot = black screen
°i disassembly my cellphone and disconected and re conected the battery but nothing
°i'm trying to drain battery power to 0% because it was charged to 80% and now i'm connecting some things to negative and positive parts of the cable of the battery to consume energy and drain the battery
°i tried "test point" but it is the same has enter to the recovery (vol+ pwr) because it boot to the recovery, and it ask me for MI account authorized when i try to flash stock rom in sp download tool
my redmi note 8 pro only led blinks when i connect the usb to my pc or when i charge it.
Can you help me? please. my discord
zumboy#2354

Haven't they changed the need for an authorized account? I bricked my RN8P and tried this.. the first time I used my mi account I got an error upon login, but the second time I tried it a bit later, it worked.. Does this mean I have an authorized account now? The unbrick process worked like a charm btw. I however, had the preloader files installed as stated somewhere else on this forum (preloader_begonia and lk).

Krakiathan said:
Haven't they changed the need for an authorized account? I bricked my RN8P and tried this.. the first time I used my mi account I got an error upon login, but the second time I tried it a bit later, it worked.. Does this mean I have an authorized account now? The unbrick process worked like a charm btw. I however, had the preloader files installed as stated somewhere else on this forum (preloader_begonia and lk).
Click to expand...
Click to collapse
when you tried that? i have a bricked r8 pro without authorized account.

error:status brom cmd fail(0xc0060005)请问这个怎么解决？

ScarletVeil said:
I think my account authorized because either I plead to them for giving me authority to FLASH when on RN3PRO BIG MESS CASE, I must apply form in CHINESE (there was tutorial because I dunno any Chinese). I need one because very hardbrick after flashing alpha rom, yes one dead phone with no fastboot / recovery revived :silly:
If you ever ask authority to flash in Chinese and got accepted (I need to wait 5 days after submitting request) chance you got one authorized account
Click to expand...
Click to collapse
Is that the same case as The Great Anti Rollback Pandemic? I've messed up my Note 5 Pro and missed the chance to apply for special permission, so got that bad boy resurrected with a bypassed xiaomi flash.

kekesed97 said:
Is that the same case as The Great Anti Rollback Pandemic? I've messed up my Note 5 Pro and missed the chance to apply for special permission, so got that bad boy resurrected with a bypassed xiaomi flash.
Click to expand...
Click to collapse
That is all thats needed for RN8 Pro as well.

Stuck in recovery
Hi guys
i'm stuck with my RN8P CN, I've made mistakes while thinking I have a global version but instead I have CN version. So now my phone is stuck with no rom and I have thestock recovery, the bootloader is locked, fastbook is ok.
But when i want to use mi unlock to install TWRP and the stock rom it failed saying "please add your account in MIUI settings".
How can i do that without a rom ? Or so, do you have a guide for getting back a stock phone with stock recovery/rom ?
Thanks in advance guys
Gary

GaryBogard said:
Hi guys
i'm stuck with my RN8P CN, I've made mistakes while thinking I have a global version but instead I have CN version. So now my phone is stuck with no rom and I have thestock recovery, the bootloader is locked, fastbook is ok.
But when i want to use mi unlock to install TWRP and the stock rom it failed saying "please add your account in MIUI settings".
How can i do that without a rom ? Or so, do you have a guide for getting back a stock phone with stock recovery/rom ?
Thanks in advance guys
Gary
Click to expand...
Click to collapse
Unfortunately, there is no helping as per today for your condition. Your only choises is:
Go to Xiaomi Service Center nearby,
Buy a Third Party smart box based flash solution (it cost fortune, but worth for investment if you see your smartphone as "toys").
Buy a Third Party account to authenticate flash with third party flash solution (No smartbox needed, and cost a fraction of fortune).
Go to a nearest phone repair shop (They usually have one of two flash solution above, cost around $20-$30, depends on your region)
Use a Remote-based flash solution (You connect your phone to your computer, repairman will ask you to install necessary tools, and control your PC via remote desktop)
Buy a new phone (totally cost an arm and leg)
As none of solution above is supported by this community, you will have to go on your own.
Cheers.

HOW TO FIX AN ERROR OCCURRED WHEN UPDATING THE DEVICE SOFTWARE

When attempting to root, install a custom ROM, or even install the original firmware, you may encounter issues that are caused by a broken cord, a dead computer, or when the firmware you installed is corrupted or you have the incorrect version installed. However, covering all error messages in a single article is difficult. As a result, we're focusing solely on "An error occurred when updating the device software." Samsung Galaxy Smartphones exhibit this error. It happened to me on a Samsung Galaxy Note 10 Plus with One UI and Android 10, Android 11, and Android 12 firmware.
We have two options for fixing this: official and unofficial. The latter is suggested.
Unofficial Method
Using Frp HiJacker by Hagard
In this method, we will be using the unofficial application “Frp HiJacker by Hagard“.
1. First you need to download the application from this link.
2. Once downloaded please extract the zip archive and you will get a “.exe” file. Double click on it to install.
3. In the second installation window you will be asked to enter the password. Now enter “www.gsmhagard.com” as the password and complete the installation.
4. Once done connect your Samsung Galaxy Smartphone with your PC and open the “Frp HiJacker by Hagard” application.
Now if the box near “Port” is empty then please click the “Scan” button. Once done your phone will be detected by the application.
Else type your model number.
However, if the box is already filled automatically you are good to proceed.
5. Now select “Soft Brick Fixer” and click the “HIJACK IT!” button.
That’s it your Galaxy Smartphone will reboot and the error will be gone for good.
Official Method
This method uses the official Samsung “Smart Switch” PC application.
1. First please download and install the Smart Switch application on your Windows PC from this link and for MAC OS here.
2. Now open Smart Switch If your device is connected you will get the phone model on this screen. If your Galaxy Smartphone is already connected please press the 3 dots on the top right corner and you will get a dropdown.
3. Now tap on “Emergency Software Recovery “. If you are good to go your phone model will be listed in the window’s list.
If you can see your phone’s model there please select it and click “OK” and follow the onscreen steps to resolve the error.
However, if you are not able to see your phone model or not able to connect to Smart Switch In this case please click on the second option which is “Reinstall device driver “.
When you get the window please click “Confirm” to proceed with phone driver installation.
Continue from "Step-3" once the device driver installation is complete and you can connect your phone to the "Smart Switch."
If you are unable to connect your Galaxy Smartphone to Smart Switch or if your phone model is not listed under "Emergency Software Recovery," you should utilize the Unofficial approach.

This actually helped me. Say, I've noticed it also has "remove FRP". Can you please explain how to perform this operation, too?

AndroidDeveloperLB said:
This actually helped me. Say, I've noticed it also has "remove FRP". Can you please explain how to perform this operation, too?
Click to expand...
Click to collapse
Did you manage it to work?

Naksuhd said:
Did you manage it to work?
Click to expand...
Click to collapse
What do you mean?
It only solved the error. I still have FRP.
I have found this video though, and even though it looks quite dangerous (for the PC), I gave it a try.
I'm only half way there. I got to the point that I'm in the settings of the OS.
The video is here:
link

I had this exact same issue while trying to install twrp on my galaxy s7 edge, after a lot of searching I could'nt find any solutions. I ended up choosing an older version of twrp and uploaded that, which fixed the issue.

DanyBoi05 said:
I had this exact same issue while trying to install twrp on my galaxy s7 edge, after a lot of searching I could'nt find any solutions. I ended up choosing an older version of twrp and uploaded that, which fixed the issue.
Click to expand...
Click to collapse
Hey! Could you report which version of twrp you used? I ran into exactly the same problem with my galaxy s7 edge and would like to try your solution

Man! Thank you! Most readable guide. Tried others, but they are so convoluted, you wrote it so good, fixed soft brick on S10!