Develop Bugs

Need latest firmware

I need latest firmware to flash on the cm builds. I wish to fix the mobile signal issues that come with cm. The firmware can be extracted from latest oos but i haven't done so before.
Ps firmware means the radio modem etc not the system.

do u want a firmware.img to flash via twrp or do u want the bin files
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
maxsam4 said:
I need latest firmware to flash on the cm builds. I wish to fix the mobile signal issues that come with cm. The firmware can be extracted from latest oos but i haven't done so before.
Ps firmware means the radio modem etc not the system.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BzWKkm1vb13uTmtMMm1DcWxNTFE/view?usp=sharing
here u go, this is from Latest update of OxygenOS 3.2.4 and pulled from Partitions Backup

Bradl79 said:
do u want a firmware.img to flash via twrp or do u want the bin files
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
https://drive.google.com/file/d/0BzWKkm1vb13uTmtMMm1DcWxNTFE/view?usp=sharing
here u go, this is from Latest update of OxygenOS 3.2.4 and pulled from Partitions Backup
Click to expand...
Click to collapse
I just want my device to have the latest firmware. doesnt matter how i get it.
on which partition do i have to flash this image?

what partitions is twrp giving you to flash on

Bradl79 said:
what partitions is twrp giving you to flash on
Click to expand...
Click to collapse
boot recovery system

maxsam4 said:
boot recovery system
Click to expand...
Click to collapse
i don't think that would work, let me get u the modemst bin files and u can flash via fastboot, hold on
---------- Post added at 04:11 AM ---------- Previous post was at 04:05 AM ----------
fastboot flash modem <name-of-modem>.bin
modemst1.bin
modemst2.bin

Bradl79 said:
i don't think that would work, let me get u the modemst bin files and u can flash via fastboot, hold on
fastboot flash modem <name-of-modem>.bin
Click to expand...
Click to collapse
Isn't that your EFS Backup? Not sure you should be sharing that as it contains your IMEI if I'm not mistaken?

Just flash the original OOS 3.2.4 or if it was already installed, you should be automatically on latest firmware. AFAIK CM zips do not include firmware files.

Link
Bradl79 said:
do u want a firmware.img to flash via twrp or do u want the bin files
---------- Post added at 03:16 AM ---------- Previous post was at 03:11 AM ----------
https://drive.google.com/file/d/0BzWKkm1vb13uTmtMMm1DcWxNTFE/view?usp=sharing
here u go, this is from Latest update of OxygenOS 3.2.4 and pulled from Partitions Backup
Click to expand...
Click to collapse
Link is down Please re up it

clone217 said:
Link is down Please re up it
Click to expand...
Click to collapse
I think salty is right, the modemst files could contain my info only and I don't want to mess ur phone up, have u tried to flash the latest OS so u can get the latest firmware, BC that will contain the correct files

I didn't try the new os, of you have am IMG will do

clone217 said:
I didn't try the new os, of you have am IMG will do
Click to expand...
Click to collapse
Extract latest oos and flash NON-HLOS.bin from the firmware folder using
fastboot flash modem NON-HLOS.bin
Good thing i didn't flash his efs ????
I would have uploaded the modem but my upload speed is too slow

Re-Lock Bootloader Of Moto G5 Plus (Indian Variant)

This Article Will Guide You to how to relock the bootloader of your moto g5 plus (Indian Variant) It should work on other Variants to but tested only on the indian variant.
Things You Need:-
1.Minimal ADB
2.Moto Stock Rom Link:- (https://firmware.center/firmware/Mo...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip)
Download the last file that has brasil in file name
Steps To Relock The Bootloader:-
1.Install Minimal ADB
2.Download And Extract Moto Stock​ Rom to any folder
3.Open The folder where you extracted the stock rom and copy all file to Minimal ADB folder.
4.Now Connect Your Device In Fastboot Mode
5.Open Minimal ADB And Type each command one by one
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Then it will restart your Device. And You Will Get Locked Bootloader.
After locking bootloader, flash full Rom to get ota
https://pastebin.com/ZWTaWuyr
This are the commands to flash full rom.
Thanks To Telegram Group for the commands link.

Nirbhay2 said:
This Article Will Guide You to how to relock the bootloader of your moto g5 plus (Indian Variant) It should work on other Variants to but tested only on the indian variant.
Things You Need:-
1.Minimal ADB
2.Moto Stock Rom (Available In The Moto G5 Plus forum)
3.Nothing Else
Steps To Relock The Bootloader:-
1.Install Minimal ADB
2.Download And Extract Moto Stock​ Rom to any folder
3.Open The folder where you extracted the stock rom and copy all file to Minimal ADB folder.
4.Now Connect Your Device In Fastboot Mode
5.Open Minimal ADB And Type each command one by one
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
Then it will restart your Device. And You Will Get Locked Bootloader.
*Don't Skip Any Command.
Click to expand...
Click to collapse
The process worked I could reblock the bootloader of my G5 Plus XT1680

Knight sparda said:
The process worked I could reblock the bootloader of my G5 Plus XT1680
Click to expand...
Click to collapse
Nice. Means it working for other Variant also

I don't think you will receive OTA updates even after locking the bootloader again.
Sent from my Moto G (5) Plus using Tapatalk

You have forget for flashing Recovery too.

matrixzone said:
I don't think you will receive OTA updates even after locking the bootloader again.
Click to expand...
Click to collapse
After locking bootloader, if u flash the whole rom again then u will be able to get OTA updates as normal. 100% Tested by me

Schrotty35 said:
You have forget for flashing Recovery too.
Click to expand...
Click to collapse
Flash full Rom after locking the bootloader.

After? You mean bevor.

Schrotty35 said:
After? You mean bevor.
Click to expand...
Click to collapse
Yes. After locking the bootloader you can flash full rom.

Nirbhay2 said:
Yes. After locking the bootloader you can flash full rom.
Click to expand...
Click to collapse
Can you elaborate?
Do we need to do something else after executing these commands to get otas

Rajul said:
Can you elaborate?
Do we need to do something else after executing these commands to get otas
Click to expand...
Click to collapse
You have to flash full rom to get ota.
Commands are here:- Taken From Telegram Group.
https://pastebin.com/ZWTaWuyr

Nirbhay2 said:
You have to flash full rom to get ota.
Commands are here:- Taken From Telegram Group.
https://pastebin.com/ZWTaWuyr
Click to expand...
Click to collapse
Now that my bootloader is locked,cqn these commands be executed?

Rajul said:
Now that my bootloader is locked,cqn these commands be executed?
Click to expand...
Click to collapse
Yes

I ran in the rom Brazil latam Mexico did not work, and also tested other roms and to no avail, always asks for the signed system image.

reuber said:
I ran in the rom Brazil latam Mexico did not work, and also tested other roms and to no avail, always asks for the signed system image.
Click to expand...
Click to collapse
You have done something wrong. This method is working 100%. Explain the error. Which build you are trying to flash...?

I am using the stock XT1681-XT1683_POTTER_BRASIL_latam_MEXICO (NPNS25.137-15) and following all the commands and in the end returns the message (still requires signed boot.img) will it be due to my device being Brazilian?

I get same error on my EU Version.

everything works perfectly in indian variant
1.download the brazillian variant of stock rom
2.follow these steps
3.flash whole stock rom using commands posted.
4.you will get ota as soon as you start device

Schrotty35 said:
I get same error on my EU Version.
Click to expand...
Click to collapse
In fact this is not a bug, but a bootloader requirement to flash a signed system image, I think!
---------- Post added at 08:27 PM ---------- Previous post was at 07:40 PM ----------
Rajul said:
everything works perfectly in indian variant
1.download the brazillian variant of stock rom
2.follow these steps
3.flash whole stock rom using commands posted.
4.you will get ota as soon as you start device
Click to expand...
Click to collapse
Should only work then in the Indian variant

reuber said:
In fact this is not a bug, but a bootloader requirement to flash a signed system image, I think!
---------- Post added at 08:27 PM ---------- Previous post was at 07:40 PM ----------
Should only work then in the Indian variant
Click to expand...
Click to collapse
The full rom is already signed.

attempting to root 7.1.1 and maybe mucked it up

Hello XDA,
Long time lurker, first time poster. I decided I needed to root so I can get back some features I lost with the nougat update (wifi hotspot, adaway). Due to not needing my hotspot for a while, I didn't end up trying to root until the OTA 7.1.1 was installed. Here's what I did and where I'm at;
-Followed a XDA guide to root with english twrp (alberto21 was it)?) and SuperSU. Failed.
-followed guide to use chinese twrp. Installed but stuck on boot screen
-kept chinese twrp, flashed to latest supersu, booted but mobile data won't come back on. Regular service works so wifi is okay as workaround for now
found guide saying 7.0 needs a fixed kernel. Before I tried that found another guide that says it won't work with 7.1.1 and to use magisk latest instead
-tried to flash magisk, failed error installing zip file
-supersu fails at extracting ramdisk, which I guess will happen since magisk is failing
-put the alberto21 recovery back on and tried it just for the hell of it
There are so many guides. I feel that if I found the right one and used it the first time, then it would have worked. Thinking that chinese supersu install from recovery goofed up magisk working. Also, every time I go into recovery, it says it was unable to mount storage before I even try to do anything, but it didn't stop the chinese supersu files from writing.
So at this point my phone boots and works except mobile data no longer comes on. I can use wifi to get around it for now. No root obviously. Would like to get root and hope mobile data fixes itself in the meantime. Any suggestions on how to proceed? I didn't find much more doing forum searches but I'll keep searching.
I was going to upload a log file but I'm not given the option to. Maybe cause I just joined?

Check your settings and see if you have your IEMI. Lets hope you have that. The kernal can cause the loss of mobile data, but right now there is no 7.1.1 to flash so you cannot flash a new ROM. Did you make a backup in TWRP?
It is the boot.img you need. Download the latest 7.1.1 ota and see if there is a boot.img. If so, I would try flashing it thru the bootloader and see if that gets you back. Before you do anything be sure to backup just in case.
---------- Post added at 07:50 PM ---------- Previous post was at 07:48 PM ----------
Also maybe see if there is a recovery too. If so, flash that over the TWRP and then flash back the non Chinese TWRP
---------- Post added at 07:56 PM ---------- Previous post was at 07:50 PM ----------
I checked the 7.1.1 ota and do not see any boot.img. I suggest trying the 7.0 boot.img. Backup first in TWRP.

You could also flash the 7.0 but do not take an OTA. Only way to get back to 7.1.1 is to wait got a full ROM.

EspElement said:
You could also flash the 7.0 but do not take an OTA. Only way to get back to 7.1.1 is to wait got a full ROM.
Click to expand...
Click to collapse
I don't care about having 7.1.1 (I don't think) as much as I care about getting my phone working properly. I thought I can't switch roms unless I had root first, is that right? Or when you say flash to 7.0 do you mean something else? I'm way down to stay at 7.0 for a while if it means having a fully functional phone with root.
I used to be pretty tech savvy with PCs back in the day but I'm just getting into the tinkering scene and didn't understand (nor still do) about proper backups. I'm reaching out to anyone who doesn't mind doing a little teaching to help me fix my phone. The mobile data is still not connected, and mobile network state says disconnected under network info screen. Also wasn't able to get root either. Can't sell the phone if mobile data won't work and don't need to sell it if I get root and my data back.
I promise I won't waste your time. I really need to figure this out and learn the safe way to tinker. I won't beg but I will buy the first couple of rounds

Ruraltech said:
I don't care about having 7.1.1 (I don't think) as much as I care about getting my phone working properly. I thought I can't switch roms unless I had root first, is that right? Or when you say flash to 7.0 do you mean something else? I'm way down to stay at 7.0 for a while if it means having a fully functional phone with root.
I used to be pretty tech savvy with PCs back in the day but I'm just getting into the tinkering scene and didn't understand (nor still do) about proper backups. I'm reaching out to anyone who doesn't mind doing a little teaching to help me fix my phone. The mobile data is still not connected, and mobile network state says disconnected under network info screen. Also wasn't able to get root either. Can't sell the phone if mobile data won't work and don't need to sell it if I get root and my data back.
I promise I won't waste your time. I really need to figure this out and learn the safe way to tinker. I won't beg but I will buy the first couple of rounds
Click to expand...
Click to collapse
No root is not needed. Your bootloader must be unlocked though. I assume if you have TRWP you unlocked the bootloader right? I don't think you can flash anything without unlocking.
Use this guide to get 7.0
https://forum.xda-developers.com/moto-z-play/how-to/moto-z-play-reteu-firmware-otas-t3557917
Just be sure not to flash bootloader.img or gpt.bin. They tell you that here.
---------- Post added at 10:46 AM ---------- Previous post was at 10:43 AM ----------
Use these commands.
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata Not necessary but recommended!
fastboot erase DDR

EspElement said:
Check your settings and see if you have your IEMI. Lets hope you have that. The kernal can cause the loss of mobile data, but right now there is no 7.1.1 to flash so you cannot flash a new ROM. Did you make a backup in TWRP?
It is the boot.img you need. Download the latest 7.1.1 ota and see if there is a boot.img. If so, I would try flashing it thru the bootloader and see if that gets you back. Before you do anything be sure to backup just in case.
---------- Post added at 07:50 PM ---------- Previous post was at 07:48 PM ----------
Also maybe see if there is a recovery too. If so, flash that over the TWRP and then flash back the non Chinese TWRP
---------- Post added at 07:56 PM ---------- Previous post was at 07:50 PM ----------
I checked the 7.1.1 ota and do not see any boot.img. I suggest trying the 7.0 boot.img. Backup first in TWRP.
Click to expand...
Click to collapse
If your referring to the IMEI number then yeah I got it. I flashed to english twrp as soon as I read that. I didn't do a backup because I was following a guide that didn't mention it and I failed to tap on the big blue BACKUP button all by myself, but I have one now in case I make it worse.
I have 7.1.1 right now. Wouldn't attempting to flash the 7.0 boot image set me up for a permanent brick?

After this. Be sure not to accept an OTA. We need to wait for a full 7.1.1 ROM before we can do that again.

EspElement said:
No root is not needed. Your bootloader must be unlocked though. I assume if you have TRWP you unlocked the bootloader right? I don't think you can flash anything without unlocking.
Use this guide to get 7.0
https://forum.xda-developers.com/moto-z-play/how-to/moto-z-play-reteu-firmware-otas-t3557917
Just be sure not to flash bootloader.img or gpt.bin. They tell you that here.
---------- Post added at 10:46 AM ---------- Previous post was at 10:43 AM ----------
Use these commands.
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata Not necessary but recommended!
fastboot erase DDR
Click to expand...
Click to collapse
Awesome, I thought I needed root to do that stuff. I have my bootloader unlocked and the annoying untrusted device boot screen and everything
Soon as I get a chance I'll get on this.
edit: so if I understand this right, I download Blur_Version.24.231.19 (the first 7.0 download in the guide), unzip the contents to my phones sdcard, and use the fastboot command line to execute the commands that you listed?

Ruraltech said:
Awesome, I thought I needed root to do that stuff. I have my bootloader unlocked and the annoying untrusted device boot screen and everything
Soon as I get a chance I'll get on this.
edit: so if I understand this right, I download Blur_Version.24.231.19 (the first 7.0 download in the guide), unzip the contents to my phones sdcard, and use the fastboot command line to execute the commands that you listed?
Click to expand...
Click to collapse
You will brick if you accept OTA or flash bootloader.img or gpt.bin which is why they say don't do it.
No, you want to connect your phone thru fastboot and have these files extracted to your computer and run those commands from command prompt.
---------- Post added at 11:52 AM ---------- Previous post was at 11:46 AM ----------
If you do not know how to do that. You need to get the windows ADB drivers. I can get you a guide if you need it.

It worked!
Took me a couple of weeks to get around to it. I picked up a used OnePlus 2 for cheap and have been loving AdAway and being able to freely tether my phone without it telling me to contact my carrier with credit card in hand. I absolutely hate the battery life though. Soon as I see a nice guide to get root on this phone I'm going to try again much more carefully next time.

New update NMA26.42-82

A whatsapp group for moto support for e4 plus just sent me this.... Anyone else receive?

Moto e4 plus xt1773 Brazil don't receive this update. Actually, my is on NMA26.42.69

I'm in Italy and haven't received the update either. Mine is the XT1771. So maybe only the version in India is receiving this update..... If so that sucks.... Anyone sale receive an update? If so what country?

maybe the last update fix the bluetooth volume issue...

how to update my rooted moto e4 plus

Knox.V said:
revert to stock boot images and recovery image first.
use this fastboot command:
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
do check for updates after reverting to stock images.
Click to expand...
Click to collapse
Sorry but i install twrp recovery...and i have stock recovery.bin file..but not able to flash

is there anyway to manually push the update, im stock and dont wanna wait hahaha, still says no update available

Knox.V said:
revert to stock boot images and recovery image first.
use this fastboot command:
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
do check for updates after reverting to stock images.
Click to expand...
Click to collapse
stock boot.img and recovery.img, need be downloaded?

ROGGGER3G said:
stock boot.img and recovery.img, need be downloaded?
Click to expand...
Click to collapse
Someone to share this files?

ROGGGER3G said:
stock boot.img and recovery.img, need be downloaded?
Click to expand...
Click to collapse
I find stock recovery but where i download stock boot.img....

rana.likhi1 said:
I find stock recovery but where i download stock boot.img....
Click to expand...
Click to collapse
could you share to us when you find, ok?

Got update in Indian Model too , thanks for info.

It's just the July security update and some minor bug fixes as they say. Nothing special.

Hope someone can make a flashable zip for us to update.
Sent from my Moto E (4) Plus using XDA Labs

ROGGGER3G said:
could you share to us when you find, ok?
Click to expand...
Click to collapse
I am needing the stock boot.img as well. Please share the link.
Moto E4 Plus x1775

Has Moto e4 plus mediatek varient Mira vision?
---------- Post added at 04:09 PM ---------- Previous post was at 04:08 PM ----------
I face video smoothness issue
---------- Post added at 04:09 PM ---------- Previous post was at 04:09 PM ----------
In mediatek varient

I was notified of this update I installed it but while reeboting my Moto stucked. I need to again turn it off and restart it.

Shv22 said:
I was notified of this update I installed it but while reeboting my Moto stucked. I need to again turn it off and restart it.
Click to expand...
Click to collapse
How long did you wait when it rebooted? It could take up to 20 minutes before it goes to the homescreen.

Someone host this update w/download link???
That'd be great

Guide flash rom WW to ROG 2 CN 8/128

1. App unlock bootloader: https://dlcdnets.asus.com/pub/ASUS/...SIGNED_UnlockTool_9.1.0.10_190702_fulldpi.apk
2.Rom: https://drive.google.com/folderview?id=1HxSqpE83FW1U_k8WxCfaTkMUEAbS2QH-
In folder, file boot.img patched to root, no bootloop and wifi working.
3. Minimal ADB: https://androidfilehost.com/?fid=746010030569952951
Step:
S1. Unlock bootloader by app unlock
S2.
a. Install Minimal ADB, copy 21 file .img to C:\Program Files (x86)\Minimal ADB and Fastboot
b. Flash 21 file img in fastboot mode (power + volumeup) using usb type C side of ROG Phone):
Run cmd-here.exe, command:
fastboot flash ***.img (*** same with name 21 file img, do not rename file)
EX: fastboot flash system system.im
fastboot flash vendor vendor.img
Boot in to recovery mode and wipe data/factory reset then reboot system!
Done.
Sorry for my poor English
Mod edit: Deleted!

Whaaaaaaaaaaaaaaaaaaaaat - if this is real, awesome job.

Damnnn good..but i'm afraid to try it

Could u explan more
After this ww rom will be installed? What about upgrade?
I mean can i do future update once in convert to ww rom ?

A Video would be nice (not doubting that this simple guide doesn't work) but to proof that indeed this method works) someone please be kind to post a video.
also, does flashing this WW ROM deletes all personal data? or does it flash like an update retaining data?

wow!!
is it works??
and is it without root??

Will OTA updates work on this? Also, could you rewrite the guide some parts are a bit confusing

It works. No OTA from now on though, without a patched boot.img the phone will always go into a bootloop. Some people have reported dead camera after WWE conversion.

"Some people have reported dead camera after WWE conversion. "
Is there more infomation about this? forum link or screenshot?
Thanks.

inspiron2 said:
It works. No OTA from now on though, without a patched boot.img the phone will always go into a bootloop. Some people have reported dead camera after WWE conversion.
Click to expand...
Click to collapse
In my tele, 2 member rp dead camera, they reflash rom CN then reflash WW, evething ok expect setting theme not working

Can someone state the major differences between the two roms?. I don't see the point of losing OTA and warranty unless you need the stock UI, other than that i don't see any advantages. By the way can someone confirm the call recording option is still there with the WW Rom.

Rashad83 said:
Can someone state the major differences between the two roms?. I don't see the point of losing OTA and warranty unless you need the stock UI, other than that i don't see any advantages. By the way can someone confirm the call recording option is still there with the WW Rom.
Click to expand...
Click to collapse
Yes Please, I Would also like to know the major differences..
Just to evaluate whether losing OTA is worth going to WW Rom.

Hello Guys, I messed up as I did not unlock bootloader first before flashing it from fastboot. Now I have a bootloop. Can anyone help me how to reflash CN. I have a lock bootloader. Thank you very much.

Unlocking BL also voids the Widevine L1 DRM btw, proceed at your own risk.

Can anyone help me how to unlock the bootloader via fastboot since I cannot get in the software as I have a bootloop. I greatly appreciate it as I have been figuring out this for the past 5 hours. Thank you.

tzdu25 said:
Can anyone help me how to unlock the bootloader via fastboot since I cannot get in the software as I have a bootloop. I greatly appreciate it as I have been figuring out this for the past 5 hours. Thank you.
Click to expand...
Click to collapse
You cannot unlock without the app. Hold the power and volume up key when the phone boots up until you enter the bootloader menu then using the volume keys navigate to recovery option from there just do a factory reset.

Hello Rashad83, I went to recovery and did a factory reset,but it still bootloop. I have a tencent ROG phone II model.
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
---------- Post added at 09:45 AM ---------- Previous post was at 09:41 AM ----------
---------- Post added at 09:47 AM ---------- Previous post was at 09:45 AM ----------
https://photos.app.goo.gl/XVSLyFfQ7VeWKFSM8

tzdu25 said:
Hello Rashad83, I went to recovery and did a factory reset,but it still bootloop. I have a tencent ROG phone II model.
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
---------- Post added at 09:45 AM ---------- Previous post was at 09:41 AM ----------
Click to expand...
Click to collapse
What did you do to get the bootloop in the first place, if you don't mind me asking?

I tried fastboot flash vendor vendor.img then it says parse error due to lock state, then after that I rebooted it then it just bootloop.
---------- Post added at 09:54 AM ---------- Previous post was at 09:50 AM ----------
dungnghien said:
In my tele, 2 member rp dead camera, they reflash rom CN then reflash WW, evething ok expect setting theme not working
Click to expand...
Click to collapse
How did they reflash ROM CN. I am stuck at bootloop with locked bootloader. I can only do fastboot. Any help is greatly appreciated. Thank you.

abunhyan said:
Could u explan more
After this ww rom will be installed? What about upgrade?
I mean can i do future update once in convert to ww rom ?
Click to expand...
Click to collapse
just flash newer version ww firmware. Data will keep. a little bit inconvenience that no OTA. but you will always have root (use magisk manager patch the boot.img).