Features:-
Compatible with DIRAC AUDIO.
The latest ViPER4Android.
Works in Permissive and Enforcing SELinux .
Preinstalled 2.4.0.1 Driver.
Sony™ and Beats™ libraries and effects.
Library & Effect entries.
DOLBY ATMOS.
BEATS AUDIO.
Supported Devices:-
Any Android Lollipop Marshmallow and nougat custom roms With Custom Recovery Root
Only lenovo a6020 devices
Requirements :-
A Rooted lenovo vibe k5 plus
Need Cwm Or Twrp Custom Recovery.
Busy box Must Installed Busy box Play store.
SELinuxModeChanger Selinux Mode To Permissive
Install Guide :-
Download Zip .
Copy To Sd Card.
Turn On Your Phone Recovery Mode.
Install The Zip.
Wipe Dalvik Cache and Cache.
Reboot . Enjoy
will it work on nougat custom roms?
00arup said:
will it work on nougat custom roms?
Click to expand...
Click to collapse
Yes works
Any review?
Will it works on miui 8 on lollipop costom rom ?
If only it worked with the HTC U11
subhash kule said:
Will it works on miui 8 on lollipop costom rom ?
Click to expand...
Click to collapse
Yes works
Flash selinux permissive script don't need waste time on application just flash permissive script and enjoy
Everythings Are Here said:
Flash selinux permissive script don't need waste time on application just flash permissive script and enjoy
Click to expand...
Click to collapse
Link?
Can this work on Oreo roms
What is the use of this mod
fgjf
i want un installer zip
Will it work for Oreo ?
this work on a6020a40 snapdragon 415?
I can confirm that this mod is working on 6020a40 but you have to follow exact the steps, otherwise it might not work. For headphones you feel the difference, for speaker less. Thanks Roman.
Bricked my Phone
Hello this is Abhishek & I just rooted my Lenovo K8 Note With Magisk & Went To Flash Your Zip File Of Viper Sound which says supports devices marshmallow and above & In addition I also Flashed one of The Post For Lenovo K8 Note of Google cam I've even clear dalvik cache as it shows in the post K8 After Flashing I End Up Stucking On Boot or Bootloop & Now My Device Is Not Booting I've Tried Many Methods By Moving In TWRP Recovery By Wiping System,data,dalvik cache,Art Cache, etc and after that I've end up Resetting to Data Factory Erassing All My Data Thansk To You'll Posts After That It Still Is In The Bootloop Do You'll Know Any Solutions To This????
[email protected] said:
Hello this is Abhishek & I just rooted my Lenovo K8 Note With Magisk & Went To Flash Your Zip File Of Viper Sound which says supports devices marshmallow and above & In addition I also Flashed one of The Post For Lenovo K8 Note of Google cam I've even clear dalvik cache as it shows in the post K8 After Flashing I End Up Stucking On Boot or Bootloop & Now My Device Is Not Booting I've Tried Many Methods By Moving In TWRP Recovery By Wiping System,data,dalvik cache,Art Cache, etc and after that I've end up Resetting to Data Factory Erassing All My Data Thansk To You'll Posts After That It Still Is In The Bootloop Do You'll Know Any Solutions To This????
Click to expand...
Click to collapse
It is not bricked. You just need to reflash a new rom in it after factory reset. The problem was that you installed it on a k8 note, while this mod is only for the k5/k5 plus devices, and so it bootlooped.
Related
Hello,
As i have read and tried that current ARISE is not workable at the moment with latest 8.1.0 factory images, I am trying to stick to 8.0.0 for the while and utilize the guides where it is successfully installed.
I have installed the factory image 8.0.0 (OPR3.170623.013, Nov 2017) af0b6564 . Afterwards I am trying to follow this guide https://forum.xda-developers.com/pixel-xl/how-to/guide-android-8-oreo-root-stock-rooted-t3660591/.
When I try to fastboot in TWRP 3.2.1-1.img , it boots and loads correctly , and I am able to install
twrp-pixel-installer-marlin-3.2.1-1.zip. However when I try to reboot into recovery it goes into bootloop for once and directly boots into main system, instead of recovery.
To check I tried downloading TWRP 3.1.1-1.zip/img and tried flashing the zip, however the ZIP installation fails within the recovery with ERROR code=1.
Can someone please inform which is the correct working TWRP and Magisk version with Android 8.0.0, so I can finish the root process and proceed with ARISE installation.
Thanks for your guidance.
They have a 3.2.1.2 version with fixes posted. Maybe that will help.
HyperEscape said:
Hello,
As i have read and tried that current ARISE is not workable at the moment with latest 8.1.0 factory images, I am trying to stick to 8.0.0 for the while and utilize the guides where it is successfully installed.
I have installed the factory image 8.0.0 (OPR3.170623.013, Nov 2017) af0b6564 . Afterwards I am trying to follow this guide https://forum.xda-developers.com/pixel-xl/how-to/guide-android-8-oreo-root-stock-rooted-t3660591/.
When I try to fastboot in TWRP 3.2.1-1.img , it boots and loads correctly , and I am able to install
twrp-pixel-installer-marlin-3.2.1-1.zip. However when I try to reboot into recovery it goes into bootloop for once and directly boots into main system, instead of recovery.
To check I tried downloading TWRP 3.1.1-1.zip/img and tried flashing the zip, however the ZIP installation fails within the recovery with ERROR code=1.
Can someone please inform which is the correct working TWRP and Magisk version with Android 8.0.0, so I can finish the root process and proceed with ARISE installation.
Thanks for your guidance.
Click to expand...
Click to collapse
Android 8.1.0 + Magisk 16 + Magisk's Arise Module works.
harihacker said:
They have a 3.2.1.2 version with fixes posted. Maybe that will help.
Click to expand...
Click to collapse
Thanks, tried it today, same behavior, dont know what am I doing wrong, have started from a clean wiped flash of 8.0.0.
Homeboy76 said:
Android 8.1.0 + Magisk 16 + Magisk's Arise Module works.
Click to expand...
Click to collapse
Can you please give steps as how does it work. I have tried with latest image 8.1.0 (OPM1.171019.021, Mar 2018) by following your guide and trying to install ARISE+Deuteronomy+2.94+Modular+AROMA+Installer afterwards flashing the Arise+Magisk+Compatibility+Module+v4.0
When I boot afterwards, I get an Arkamys has stopped notification in a loop and the mobile goes to boot in recovery automatically, I dont select Arkamys audio, then when I open Viper4Android for driver installation, the installation fails with an I/O error. I have tried with both scripts installed in the latest Magisk v16, script for BusyBox and Permissive linux.
Any guidance would help.
Thanks.
HyperEscape said:
Can you please give steps as how does it work. I have tried with latest image 8.1.0 (OPM1.171019.021, Mar 2018) by following your guide and trying to install ARISE+Deuteronomy+2.94+Modular+AROMA+Installer afterwards flashing the Arise+Magisk+Compatibility+Module+v4.0
When I boot afterwards, I get an Arkamys has stopped notification in a loop and the mobile goes to boot in recovery automatically, I dont select Arkamys audio, then when I open Viper4Android for driver installation, the installation fails with an I/O error. I have tried with both scripts installed in the latest Magisk v16, script for BusyBox and Permissive linux.
Any guidance would help.
Thanks.
Click to expand...
Click to collapse
If you are try to get this 'ARISE+Deuteronomy+2.94+Modular+AROMA+Installer' to work on Android 8.0.0 or Android 8.1.0. I could be wrong, but I do not think it is possible. If that's what you want to install Google it.
There are options for Sound mods. take a look at the "Audio mod" in the 8.1.0 Guide or Do # 7 or 8 in the 8.1.0 Guide and install Viper4AndroidFX 1.5.2 and BusyBox modules using Magisk Manager.
Your choice.
Homeboy76 said:
If you are try to get this 'ARISE+Deuteronomy+2.94+Modular+AROMA+Installer' to work on Android 8.0.0 or Android 8.1.0. I could be wrong, but I do not think it is possible. If that's what you want to install Google it.
There are options for Sound mods. take a look at the "Audio mod" in the 8.1.0 Guide or Do # 7 or 8 in the 8.1.0 Guide and install Viper4AndroidFX 1.5.2 and BusyBox modules using Magisk Manager.
Your choice.
Click to expand...
Click to collapse
Yeah well i meant installing ARISE as a package with all additional audio libraries and effects and Sony Music apps. The Audio Mod 8.1.0 guide is only for installing Dolby Atmos and Viper4Android.
As of now I am not able to search a working method to install ARISE on 8.1.0 with March 2018 update.
To give it a try , I made the effort of following your guide with 8.1.0 (OPM1.171019.021, Mar 2018) flashed clean on my Pixel XL. After following your guide and the Audio guide to the dot, I installed Viper4Android FX-v1.5.2 (by ahrion/zackptg5) which worked, however Dolby Atmos did install successfully by but crashing on every app start.
Now I am looking for a way to install Sony Music and other apps to the mix, any guidance for a working method and version for it.
Thanks.
HyperEscape said:
Yeah well i meant installing ARISE as a package with all additional audio libraries and effects and Sony Music apps. The Audio Mod 8.1.0 guide is only for installing Dolby Atmos and Viper4Android.
As of now I am not able to search a working method to install ARISE on 8.1.0 with March 2018 update.
To give it a try , I made the effort of following your guide with 8.1.0 (OPM1.171019.021, Mar 2018) flashed clean on my Pixel XL. After following your guide and the Audio guide to the dot, I installed Viper4Android FX-v1.5.2 (by ahrion/zackptg5) which worked, however Dolby Atmos did install successfully by but crashing on every app start.
Now I am looking for a way to install Sony Music and other apps to the mix, any guidance for a working method and version for it.
Thanks.
Click to expand...
Click to collapse
Question, did you install the BusyBox module? Some modules need it. I do not know if Dolby Atmos is one that needs it.
I am not an expert on Viper4. Maybe, this thread will help: [3/1/18] ViPER4Android FX 2.5.0.5/2.3.4.0 [Unity] by ahrion
Homeboy76 said:
Question, did you install the BusyBox module? Some modules need it. I do not know if Dolby Atmos is one that needs it.
I am not an expert on Viper4. Maybe, this thread will help: [3/1/18] ViPER4Android FX 2.5.0.5/2.3.4.0 [Unity] by ahrion
Click to expand...
Click to collapse
I did install Permissive SE and Osmosis Magisk Busy Box modules before installing Dolby Atmos and Viper4Android Magisk modules.
Viper4Android installs and is working OK, however when I install Dolby Atmos, either in TWRP recovery or as a Magisk Module, the mobile goes in an infinite boot screen the google "G" logo. Since I already took a golden backup of the phone using TWRP, I have to boot in recovery by hard power off and then restore the backup.
I have also installed Sony Apps Enabler Magisk module and now I am able to directly install Sony Apps from the Play Store.
Any ideas how to make Dolby Atmos work. I will ask in the Dolby Atmos original thread as well.
Thanks.
HyperEscape said:
I did install Permissive SE and Osmosis Magisk Busy Box modules before installing Dolby Atmos and Viper4Android Magisk modules.
Viper4Android installs and is working OK, however when I install Dolby Atmos, either in TWRP recovery or as a Magisk Module, the mobile goes in an infinite boot screen the google "G" logo. Since I already took a golden backup of the phone using TWRP, I have to boot in recovery by hard power off and then restore the backup.
I have also installed Sony Apps Enabler Magisk module and now I am able to directly install Sony Apps from the Play Store.
Any ideas how to make Dolby Atmos work. I will ask in the Dolby Atmos original thread as well.
Thanks.
Click to expand...
Click to collapse
Go to this thread:
[GUIDE] Ultimate audio and battery guide by kingbri
Post your Question there.
@kingbri
HyperEscape said:
I did install Permissive SE and Osmosis Magisk Busy Box modules before installing Dolby Atmos and Viper4Android Magisk modules.
Viper4Android installs and is working OK, however when I install Dolby Atmos, either in TWRP recovery or as a Magisk Module, the mobile goes in an infinite boot screen the google "G" logo. Since I already took a golden backup of the phone using TWRP, I have to boot in recovery by hard power off and then restore the backup.
I have also installed Sony Apps Enabler Magisk module and now I am able to directly install Sony Apps from the Play Store.
Any ideas how to make Dolby Atmos work. I will ask in the Dolby Atmos original thread as well.
Thanks.
Click to expand...
Click to collapse
Go to this thread: [GUIDE] Ultimate audio and battery guide by kingbri and Post your Question there.
Did Kingbri's post solve your problem?
i have accidently deleted my os on lenovo vibe k5 plus. i am stuck in bootloop. Can access twrp recovery mode. But how can install fresh stock rom on it. Give me a link to proper thread.
Here is how to solve that.
Har**** Dhimar said:
i have accidently deleted my os on lenovo vibe k5 plus. i am stuck in bootloop. Can access twrp recovery mode. But how can install fresh stock rom on it. Give me a link to proper thread.
Click to expand...
Click to collapse
How you deleted your os lel?
Well if you can acces twrp is just easy.
So. Download an custom ROM (here is one: https://forum.xda-developers.com/k5-plus/development/rom-hyper-lineageos-15-1-t3755056
Ok now you can go to twrp and wipe data, cache, dalivk cache and system.
After that flash the rom and flash Magisk or SuperSU. (I recommend Magisk)
Now reboot and wait the ROM to boot, first boot should take a while.
After that you could install an custom Kernel like this one if you want: https://forum.xda-developers.com/k5-plus/development/kernel-t3725978
Good luck
If i helped you, thanks button works well.
(Ps: You should know what you are doing, next time inform yourself) (It is dangerous to play with things like that)
Redmi Note 5 Pro gets stuck in Mi android logo after flashing any zip from TWRP. I didn't flash lazy flasher though. I flashed zip files like Font zip, launcher zip and all. Is there something else I should be doing ? I have used TWRP to enable camera 2 API plenty of times but this didn't happen. I use TWRP 3.2.1.
Post your problem in respective thread. From where did you downloaded Any zip
Without proper information you don't get proper solutions.
Just reboot to twrp wipe everything and reflash the ROM (previous ROM)
SunilSuni said:
Post your problem in respective thread. From where did you downloaded Any zip
Without proper information you don't get proper solutions.
Just reboot to twrp wipe everything and reflash the ROM (previous ROM)
Click to expand...
Click to collapse
Zip files like Poco Launcher.zip, Google Project Sans font.zip etc. I downloaded these zips from XDA developers site only.
I've got the same problem: using temporary TWRP (haven't used lazyflasher yet) and installing ZIPs ends in the stuck on mi logo. I use TWRP 3.2.3.0 and tried to install Magisk in several versions: 16.0, 16.3 and 16.7, even the manual way by patching the boot image within Magisk Manager. I just like to receive root but want to use Magisk instead of SuperSU. If I'm correct Xposed doesn't work yet, so that might explain why it it stuck at the logo.
MIUI version is 9.6.3.0
how to enable boot sound on note 5 pro
Tischbein said:
I've got the same problem: using temporary TWRP (haven't used lazyflasher yet) and installing ZIPs ends in the stuck on mi logo. I use TWRP 3.2.3.0 and tried to install Magisk in several versions: 16.0, 16.3 and 16.7, even the manual way by patching the boot image within Magisk Manager. I just like to receive root but want to use Magisk instead of SuperSU. If I'm correct Xposed doesn't work yet, so that might explain why it it stuck at the logo.
MIUI version is 9.6.3.0
Click to expand...
Click to collapse
Any solution to avoid it ?
I unlocked bootloader on 4th day , flashed TWRP tired PE, CrDroid, LOS 16 , PA , AOSP Extended roms but unable to boot any ROM. But can boot miui.eu, and other miui roms. I tried sunnyraj's TWRP 3.2.3, orange fox latest TWRP, PE TWRP, TWRP 3.2.3 Rolex+Riva , and treble enabler of 4-5 verieties , but no ROMs boot. Anybody has flashing guide? I'm not a noob . Not new to Android . I am flashing at least a ROM per day to all my phones. But this phone is a surprise.
drmuruga said:
I unlocked bootloader on 4th day , flashed TWRP tired PE, CrDroid, LOS 16 , PA , AOSP Extended roms but unable to boot any ROM. But can boot miui.eu, and other miui roms. I tried sunnyraj's TWRP 3.2.3, orange fox latest TWRP, PE TWRP, TWRP 3.2.3 Rolex+Riva , and treble enabler of 4-5 verieties , but no ROMs boot. Anybody has flashing guide? I'm not a noob . Not new to Android . I am flashing at least a ROM per day to all my phones. But this phone is a surprise.
Click to expand...
Click to collapse
1. Fastboot flash latest miui nougat rom using mi flash tool
[ Boot and setup miui, remove your mi account from phone then flash recovery ]
2. Fastboot flash custom recovery for base nougat
3. Format data and wipe internal storage
4. Flash any custom rom you want
If there is anything more you want to know contact me in PM.
NaAnBcEhEuL9A8K7 said:
1. Fastboot flash latest miui nougat rom using mi flash tool
[ Boot and setup miui, remove your mi account from phone then flash recovery ]
2. Fastboot flash custom recovery for base nougat
3. Format data and wipe internal storage
4. Flash any custom rom you want
If there is anything more you want to know contact me in PM.
Click to expand...
Click to collapse
Thank you so much. Can I flash treble gsi/sgsi ROMs?
drmuruga said:
Thank you so much. Can I flash treble gsi/sgsi ROMs?
Click to expand...
Click to collapse
Yes you can but there is no guarantee that the gsi/sgsi will boot or if booted will work properly. Only testing will tell.
Joining telegram group will help.
..
OOS pie sgsi booted and working well.
First I flashed this rom
miui_HM5AGlobal_V9.6.5.0.NCKMIFD_ba7d815e8a_7.1
and boot
Then flashed this twrp
PE-TWRP-Riva-N.img
Then
AEX pie rom
Then
OOS pie sgsi system img
https://mega.nz/#!3J42EAjC!ITVxW99G_p-Vpz7ntULr7KBfE9U6wYUi2_pOWXJhd48
Permissive V2 zip
OOS boot fix
Boot.
This camera working
MGC_5.1.018_v2e_tolyan009_v1.4(1)
drmuruga said:
OOS pie sgsi booted and working well.
First I flashed this rom
miui_HM5AGlobal_V9.6.5.0.NCKMIFD_ba7d815e8a_7.1
and boot
Then flashed this twrp
PE-TWRP-Riva-N.img
Then
AEX pie rom
Then
OOS pie sgsi system img
https://mega.nz/#!3J42EAjC!ITVxW99G_p-Vpz7ntULr7KBfE9U6wYUi2_pOWXJhd48
Permissive V2 zip
OOS boot fix
Boot.
This camera working
MGC_5.1.018_v2e_tolyan009_v1.4(1)
Click to expand...
Click to collapse
List all bugs
Hii there , i am using redmi note 5 pro for almost 4 years and have installed lots of rom. recently i switch to miui 12(android 9). now when i am trying to install evolution x , corvus os (all android 11 and 10) and other nothing is installing . the phone doesn't struck in bootloop as bootloop means the mi logo. after flashing the custom rom logo keeps on loading and suddenly orange fox recovery(Latest version) opens saying " Rescue party triggered" . only the stock rom is flashing. i tried all possible solutions .And another note is when starting orange recovery and restarting mobile Android asks for password which is new to me. all this happened because i tried to flash kernel and install root(both unsuccessful and stock kernel is restored) Also wiped all data's 100 times but no luck .Tnx in advance . please suggest.
naveednav05 said:
Hii there , i am using redmi note 5 pro for almost 4 years and have installed lots of rom. recently i switch to miui 12(android 9). now when i am trying to install evolution x , corvus os (all android 11 and 10) and other nothing is installing . the phone doesn't struck in bootloop as bootloop means the mi logo. after flashing the custom rom logo keeps on loading and suddenly orange fox recovery(Latest version) opens saying " Rescue party triggered" . only the stock rom is flashing. i tried all possible solutions .And another note is when starting orange recovery and restarting mobile Android asks for password which is new to me. all this happened because i tried to flash kernel and install root(both unsuccessful and stock kernel is restored) Also wiped all data's 100 times but no luck .Tnx in advance . please suggest.
Click to expand...
Click to collapse
Hi, you can try to flash custom roms with latest twrp. Orangefox is asking for a password because your storage is encrypted. You need to FORMAT DATA in twrp - this will wipe everything on your phone - back it up. After formatting data flash firmware, rom, gapps, kernel, magisk and it should boot.
Good luck, zaqm!
@z
zaqm said:
Hi, you can try to flash custom roms with latest twrp. Orangefox is asking for a password because your storage is encrypted. You need to FORMAT DATA in twrp - this will wipe everything on your phone - back it up. After formatting data flash firmware, rom, gapps, kernel, magisk and it should boot.
Good luck, zaqm!
Click to expand...
Click to collapse
tnx man tried that and it worked . but it was a very very long process. but why suddenly the encryption came. any idea.
naveednav05 said:
@z
tnx man tried that and it worked . but it was a very very long process. but why suddenly the encryption came. any idea.
Click to expand...
Click to collapse
Because Miui roms automatically encrypt your storage and some roms and recoveries doesn't support the miui encryption so in order the rom to boot you needed to Format data.
zaqm said:
Because Miui roms automatically encrypt your storage and some roms and recoveries doesn't support the miui encryption so in order the rom to boot you needed to Format data.
Click to expand...
Click to collapse
ya ok buddy