FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209542
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-xiaomi-sd820-sd821-los
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
reserve3
THANKS ¡¡¡¡¡¡¡
Nice and good to see more developers come here and put more attention on this phone !
Thanks !
Question : (1)Can it be used in MIUI ROM ? (2)Can this Kernel bypass the detection about the bootloader unlocked ?
Kris Chen said:
Question : (1)Can it be used in MIUI ROM ? (2)Can this Kernel bypass the detection about the bootloader unlocked ?
Click to expand...
Click to collapse
This kernel is only for los based roms m8
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
This kernel is only for los based roms m8
Click to expand...
Click to collapse
So... I guess you will check and modify your introduction to this kernel.......
CrazyGamerGR said:
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs,
Click to expand...
Click to collapse
mryugin89 said:
So... I guess you will check and modify your introduction to this kernel.......
Click to expand...
Click to collapse
Every aosp base rom now is base on lineageos except some nexus devices where got aosp roms,but my kernels doesn't work with stock roms
Sent from my iPhone using Tapatalk Pro
New update will be up soon!
Sent from my iPhone using Tapatalk Pro
New update is up
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
Download link: https://www.androidfilehost.com/?fid=745425885120759920
a request from China
Can you also make a kernel for MIUI, because MIUI is sometimes very hot and very crowded.Please forgive my poor English.
Working perfectly in las RR ROM
The CrazyAqua kernel is working just fine with RR 5.8.4 on my Xiaomi Mi Note 2.
Question:
Once I get the 5.8.5 update for my device will I need to reflash this kernel or what?
@CrazyGamerGR Hello, i really like your kernel so far, has a ton of options and cool stuff to experiment with. Never less there is one feature I personally really want to see, WiFi monitor mode, could you merge the code to your superb kernel? Please, I'm really itching to be able to use pcap, airmon-ng and all these beautiful tools on my Mi Note 2.
This is my first Xiaomi phone, i was always with OnePlus and Kali Net Hunter was available or ported to each of their devices and I'm really missing it over here with Xiaomi.
Thanks in advance!
Related
Trebor Kernel[/FONT] - I9500
That's My First Compilation For The I9500
And I Am Open To Suggestions And Tips.
I Hope You Enjoy! :fingers-crossed:
The Kernel Is Compiled With The Source Of GearCM And Using My Own Changes.
Features:
Better Performance
Less RAM Consumption
Better Battery
F2FS Support
And More!
CPU Governor:
ZZMoove (Best)
Interactive
Conservative
UserSpace
PowerSave
OnDemand (Default)
Performance
I/O:
Noop (Best)
Row
BFQ
Fiops
TCP:
WestWood
Reno
Bic
Cubic
HighSpeed
Hybla
HTCP
Vegas
Veno
Changelog:
Compiled With Lastest GearCM Changes
Compiled With Lastest SaberMod 4.9.X
Compiled With Pipe Flag
Changed All Flags O2 To O3
Compiled With 03 For Large Performance Boost
Compiled With OFast For Large Performance Gain
Compiled With Graphite Optimizations
Compiled With FGraphite For Memory Optimizations
Compiled With FGraphite Identity For Some Optimizations
Compiled With FOpenMP To Use Less RAM
FSanitize Leak For Reduce Memory Use
Enable Multi Core Power Saving
F2FS Support
Fully Compatible With Synapse
Compatible Kernel Audiutor
And More!
Downloads:
Mod edit: Links removed.
Extras:
Synapse
Kernel Audiutor
My Settings
Credits:
@Alberto96, @sparksco, @frap129
@zeeshanhussain12, @asad007
Sources:
https://github.com/GearCM/android_kernel_samsung_exynos5410
http://sabermod.com/Toolchains (DEV ONLY)/arm/arm-linux-androideabi/
https://github.com/hyper-toolchains
*Not Tested
Reserved!
Some feedback?
treborbr said:
That's my first compilation for the I9500 and I am open to suggestions and tips. I hope you enjoy! :fingers-crossed:
Features:
Compiled using the most recent source of GearCM (Thanks @Alberto96 by mater this amazing repository) :highfive:
Compiled using the latest version of GCC 4.8 (Thanks Google)
And more will come!
Downloads:
Fisrt build!
And thanks @zeeshanhussain12 for helping me help compile my first kernel. :victory:
Credits:
@Alberto96 (GearCM)
@zeeshanhussain12 (For Help)
@asad007 (Your zip used as a base)
Source:
https://github.com/GearCM/android_kernel_samsung_exynos5410
Click to expand...
Click to collapse
Cool another new kernel. Tried dirty flashing on Omega 28 but didn't boot. VoLTaqe and LWK boots fine after dirty flashing the kernel
Us this for cm based rom only?
it doesnt support touchwiz i think check the title
nevinjoseph said:
Cool another new kernel. Tried dirty flashing on Omega 28 but didn't boot. VoLTaqe and LWK boots fine after dirty flashing the kernel
Click to expand...
Click to collapse
Mate, check the thread tittle. It's only for AOSP/CM ROM only.
Sent from my Galaxy S4
For now it will only work on ROMs based on CM/AOSP.
Then I will compile a version for TW. I'm just seeing baseband will use. I'll let you choose: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=i9500
Works on all roms based on CM/AOSP.
Thank you for responding to comments.
Someone tested the Kernel in some other ROM? I tested only with GearCM.
Good work mate!
Sent from my Moto E using Tapatalk
treborbr said:
Then I will compile a version for TW. I'm just seeing baseband will use. I'll let you choose: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=i9500
Click to expand...
Click to collapse
I think "I9500UBUHNL3" or "I9500XXUHOG1". There are placed in page 2.
Sent from my Galaxy S4
treborbr said:
Thank you for responding to comments.
Click to expand...
Click to collapse
Im happy to see another kernel being developed for our phone . Just wanna say that if you make a kernel for TW please please take stability into consideration. I wish there is a kernel that offers more flexibility over TW but still maintains its consistency.
Does this supports synapse?
Thanks My Teacher ;D
These basebands are the latest? It is that how my internet is slow will build on the latest baseband and that you prefer.
I'll do a version for TW but for now I'm choosing baseband yet. If you can look at previous messages and help choose the best.
Yes. But for now there are puddles changes
Vision1 Kernel
Working with LineageOS (Sync with LineageOS Kernel Source)
Kernel Version : 4.4.83+
CPU up to little/big 2.0/2.6 GHz
CPU down to little/big 69/69 MHz (300/300 MHz _nuc version)
GPU up to 710 MHz
GPU down to 180 MHz
blu_active, alucard, ondemand, interactive, performance, conservative, powersave, ... CPU Governors - interactive default
ZEN, VR, FIFO, MAPLE, SIO, SIOPLUS and FIOPS IO Scheduler - MAPLE default
IOsched switcher
Adaptive LMK
more TCP Cong - Westwood default
Adreno Idler - default on
Adreno Boost - default off
Backlight dimmer option - default off
Workque Power Saving - default on
Tunable Wakelock
Input Boost - default on
Touch Boost - default off
Soundcontrol
KCAL
DT2W
Wifi driver from CAF
Stock Camera Driver <- use all camera and better picture quality
NTFS FileSystem R/W
SafetyNet patched
Working with Kernel Adiutor (I prefer EX Kernel Manager)
Anykernel Installer
Fingerprint is useable as Homebutton
optimized UBERTC 4.9.4 with mixed -O2/-O3 + pipe + graphite flag
more...
Be careful!!! Make backup before flash. Please report if you find an issue. Thanks
Download @ XDA
Download @ AFH
Thanks to:
LineageOS for base
@RenderBroken for EAS port
codeworkx for working on base
flar2 for patches
sultanxda for patches
UBERTC for toolchain
more
XDA:DevDB Information
[KERNEL][4.4.83+][LOS] Vision1 - fast/smooth/battery-friendly, Kernel for the OnePlus 5
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium/kernel-msm8998
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Vision1_2017_08_23
Stable Release Date: 2017-08-23
Created 2017-08-11
Last Updated 2017-08-23
Changelog and more...
Upcoming
Vision1_2017_08_XX
--- anything to do?
Changelog
Vision1_2017_08_23
first build after a complete rebase of the kernel. all upstream patches and the most CAF patches are done. clean merge with all commits.
old and stable WiFi driver
no CPU UC/OC
Vision1_2017_08_21 <- wipe cache
new EAS version with patches from RenderBroken
bring back interactive as default and iosched switch to go to noop if screen is off
WiFi driver update
only little changes
Vision1_2017_08_20
2 versions: a normal one and one without underclock.
CAF - reduced some voltages or make them dynamic
CAF - performance and camera related patches
Build System optimizations
Vision1_2017_08_19
Biggest Bugfix-Build ever
pocket judge working
removed cpu input boost from big cluster
removed temp throttle from big cluster
and much more...
Vision1_2017_08_18
Linux Kernel 4.4.83
go back to UBERTC 4.9.4 <- is smoother than 5.3
some little changes
Vision1_2017_08_17
use UBERTC 5.3
go back -Ofast -> -O2 for stability
battery optimization
more compiler optimization
fix a charging related bug
fix an input delay
tristate-key sync with LOS
remove old camera driver
VisionOne_2017_08_16
new Camera Driver - now we can use all camera
new WiFi Driver
more LOS changes
Careful please: there is a version with new and old memory setup. LOS uses from today the new memory setup. i build both versions because not all custom rom have ported this.
VisionOne_2017_08_15_new_wifi
updated wifi driver from https://review.lineageos.org/#/c/185015/
more...
VisionOne_2017_08_15 <- wipe cache please
Dash fixed
Deepsleep fixed
Fingerprint Homebutton is working with 20170815 build from codeworkx
synced with LineageOS upstream
new CPU Steps 69MHz, 160MHz, 230MHz
set Touchboost --> default off / CPU Input Boost -> default on
Linux Upstream 4.4.79 -> 4.4.82
optimized UBERTC 4.9.4 compiler
mixed -O2/-O3/-Ofast compiler flag for stabilty and speed
more compiler changes
more...
VisionOne_2017_08_13_CAF <- wipe cache after flashing
Sync with CAF Upstream
something more
VisionOne_2017_08_13
Linux 4.4.21 -> 4.4.79
some little fixes for more smoothness
VisionOne_2017_08_12_fix - 177xxx in Antutu - see Screenshots
fix build
faster boot
some little fixes
VisionOne_2017_08_11
initial build
Reserved
Wow!! You are the man who made the best lollipop rom for OP2
I'm going to flash this one, If something goes wrong you'll gift me a new 1+5=?...
Just kidding, Thanks @AuxXxilium..
Amazing
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
I'm going to try this one out right now..Thanks for ur efforts.
angelmakumbe said:
Wow!! You are the man who made the best lollipop rom for OP2
Click to expand...
Click to collapse
thanks. nice to see someone knows me after a long time away.
tested the kernel briefly on Unofficial RR, the UFS speeds seem to be much better than LK or Carbonite... missing the home button though flashing like crazy today, can't catch a break
@AuxXxilium as you've stated in OP home button is not usable, But mine is working fine..
OMG, you are alive still? Used to use your kernel before I learned how to make kernels
AuxXxilium said:
thanks. nice to see someone knows me after a long time away.
Click to expand...
Click to collapse
I remember you from the G2 times too, I used to follow your work back then, I'm happy to see you again. I'll definitely try your kernel and keep my eye on this thread!
Glad to see more kernel devs are supporting us folks on LOS. Flashing this kernel presently.
DespairFactor said:
OMG, you are alive still? Used to use your kernel before I learned how to make kernels
Click to expand...
Click to collapse
i know it's a joke.
thanks.!!
best kernel!!!
AuxXxilium said:
i know it's a joke.
Click to expand...
Click to collapse
Not a joke at all, I used to use your kernel on Nexus 5, I think?
DespairFactor said:
Not a joke at all, I used to use your kernel on Nexus 5, I think?
Click to expand...
Click to collapse
Oh that is nice. Now you are a great dev.
AuxXxilium said:
Oh that is nice. Now you are a great dev.
Click to expand...
Click to collapse
Thanks I am just a noob haha, you didn't want to believe me
I'm running latest Codeworkx build. Home button doesn't work with stock or vision kernel, but works with lightning kernel. Don't know why
Please be careful. i removed the latest version - because it crashes the dash charge. search for the problem and will fix it soon.
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?fid=817550096634793333
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the OnePlus One
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-opo-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-17
Last Updated 2017-08-17
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/17-08-17
- initial release
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
You're back! Thanks for still contributing to bacon.
Mr.Ak said:
You're back! Thanks for still contributing to bacon.
Click to expand...
Click to collapse
I promised it where i will come back
Downloading
Minions_Army said:
Downloading
Click to expand...
Click to collapse
Cool^^
CrazyGamerGR said:
Cool^^
Click to expand...
Click to collapse
Performance is good
Minions_Army said:
Performance is good
Click to expand...
Click to collapse
Thx for feedback m8
Will it work with Sultan's N ROM ?
tamboli007 said:
Will it work with Sultan's N ROM ?
Click to expand...
Click to collapse
You can try m8 coz he use caf source but los work too
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
You can try m8 coz he use caf source but los work too
Click to expand...
Click to collapse
It's working fine:good:. Thanks
Edit :- camera doesn't work .
tamboli007 said:
It's working fine:good:. Thanks
Edit :- camera doesn't work .
Click to expand...
Click to collapse
It is rom problem coz i didn't added something for camera
He make changes for camera coz i used his rom on my op3,i need to do some changes to work correct with caf roms too
Sent from my iPhone using Tapatalk Pro
I hope u plan to support custom blobs too. OOS v2 (sultan) or OOS v3 instead of CM blobs
MrxSiN said:
I hope u plan to support custom blobs too. OOS v2 (sultan) or OOS v3 instead of CM blobs
Click to expand...
Click to collapse
Maybe soon m8
Sent from my iPhone using Tapatalk Pro
downloading.., btw., kernel auditor should be used to do the changes..?
murti52 said:
downloading.., btw., kernel auditor should be used to do the changes..?
Click to expand...
Click to collapse
Yeh i recommend it
this one won't work on this rom if it's AOSP?
https://forum.xda-developers.com/oneplus-one/development/rom-aospextended-rom-v3-1-t3547628
Yes, I'm a noob ......I can only flash rom's
I'm lost with all these versions: CAF LOS,CM, AOSP ..... special Camera HALs ....can someone explain what works on what ?
the AOSP rom is great but battery charging is superslow and cpu undervolting would also be great
I'm looking to get the best battery life rom without choppy interface
I never game on my OPO , just call,txt and internet.
any Rom /Kernel suggestions (or gouvernor settings)
SKIZO Kernel
for AOSP Custom ROMS only
Features
- Linux 4.4.131
- LA.UM.6.4.c1-13800-8x98.0 CAF
- LA.UM.6.4.r1-08000-8x98.0 CAF
- EAS (Energy Aware Scheduler)
- OC; UC; UV
- Governors: Pwrutilx - SchedAlucard - ElectroUtil - SchedUtil (default)
- Latest Zen IO (default)
- Adreno Boost & Adreno Idler
- KCal Control
- Sound Control
- Boeffla Wakelock Blocker
- Wireguard
- CAF Adaptive LMK
- FRANDOM
- Laptop Mode On (Fsync OFF)
- Tweaks From Others MSM8998's (Pixel 2, OP5/T ...)
- Compiled with Clang/LLVM 7.0.1
Instructions
- Just flash it dirty!
NOTES
This kernel is only for AOSP Roms (RR, OMNI, LOS, etc ...)
OC is disabled by default - If you want to play with just download a kernel manager like EXKM
Donate some beers!
Download Link
XDA:DevDB Information
SKIZO, Kernel for the Xiaomi Mi Mix 2
Contributors
spakkkk, Wight554
Source Code: https://github.com/spakkkk/SKIZO
Kernel Special Features:
Version Information
Status: Stable
Created 2018-04-25
Last Updated 2018-05-08
Reserved
Changelog
### 09.05 ## release 10 ###
- CLANG updated to 7.0.2
- A lot of EAS tweaks
- Fix for Xiaomi USBC Phones (Thanks demon000)
Click to expand...
Click to collapse
Past Changelog
### 08.05 ## release 9 ###
- Now you can OC our device a little bit
Silver Cluster
Before: 300Mhz - 1900Mhz
Now: 175Mhz - 2112Mhz
Golden Cluster
Before: 300Mhz - 2457Mhz
Now: 175Mhz - 2592Mhz
- Voltages tables update
- Few tweaks
### 04.05 ## release 8.5 ###
- OP5/T Tweaks
- pwrutilx Governor added (Tweaked version of Schedutil - Schedutil remains default)
- And more @ Git
### 01.05 ## release 8 ###
- Linux 4.4.131
- EAS tweaks
- Ramdisk modules updated to work with SE Enforcing policies
### 01.05 ## release 7.5 ###
- LA.UM.6.4.c1-13800-8x98.0
- Little EAS tweak to be more responsive
- And more @ Git
### 30.04 ## release 7 ###
- Linux 4.4.130
- Lowest CPU Freq is now 230MHz and GPU is 180MHz (Thanks Wight554)
- A lot of improve commits, check my github
### 27.04 ## version 6.1 ###
- Schedutil is default (We still got schedalucard & electroutil, but only for fun - schedutil is the best EAS governor imo)
- KCal default values modded
- Patches from OP5/T
- KCal Patches
- Import some changes from Xiaomi (Thanks demon000)
- More @ Git
### 25.04 ### version 5 ###
- Linux 4.4.129
- More Tweaks From Others MSM8998's (Pixel 2, OP5/T ...)
- Added ELECTROUTIL
- Removed SCHEDDARKNESS
### 24.04 ### version 4.1.1 ###
- Input Boost is now more conservative
- Compiler will be always Nathan's Clang/LLVM 7.0.1
- Tweaks and more Tweaks (Our device now boots faster they said)
### 23.04 ### version 4.1 ###
- Scheddarkness Governor Added
- OP5/T & Pixel 2 Kanged Tweaks
- Crypto Patches
- Updated FRANDOM to latest
- KCal Adjusts
- Adreno Boost Added (Off by default)
- Schedalucard by default (Better battery for "flash and forget" guys)
- Adaptive LMK On + 60 apps on background by default
- FSync Off by default - Laptop Mode ON Instead
- ZRAM disabled by default
- Added ZEN IO Sched (Last Version)
- ZEN and read_ahead_kb 2048 by default
### 21.04 ### version 3 ###
- Based on Wight554 Kernel (Thanks for your help!)
- EAS
- Boeffla Wakelock Blocker
- Wireguard
- CAF Adaptive LMK
- LA.UM.6.4.r1-08000-8x98.0 CAF
- Upgrade Wi-Fi stack (LA.UM.6.4.r1-08000-8x98.0)
- Wahoo Binder
- Westwood
Tuned Values
- USB Force Fast Charge (Example: PC will charge at 900mA instead of 500mA)
- Schedalucard
Values tweaked by me to save battery without losing smoothness/performance
- Schedutil
IOWait Boost now switchable (Default Off)
- Adreno Idler
Tweaked Config Values
- FRANDOM Added
- More Wakelocks added to blocker list
- A lot of Tweaks And Improvements
Well this is exciting! Can you flash on any rom?
itsdan313 said:
Well this is exciting! Can you flash on any rom?
Click to expand...
Click to collapse
I tested on some ROMS and so far everything is OK
This kernel is for custom roms only, not MIUI's.
There are some issues that need to be fixed, vibration strengths can't control in los4.25
Thanks for the kernel. Is it possible to download beta version, please.
Did this change the LTE-A modem configuration ? and fix the official Kernel of Xiaomi ?
lasset said:
Thanks for the kernel. Is it possible to download beta version, please.
Click to expand...
Click to collapse
Why? The Public release have all of updates
Futanari said:
There are some issues that need to be fixed, vibration strengths can't control in los4.25
Click to expand...
Click to collapse
Im with LOS and works fine
Odrilow said:
Did this change the LTE-A modem configuration ? and fix the official Kernel of Xiaomi ?
Click to expand...
Click to collapse
I dont what u talking about, can u explain?
thanks!
spakkkk said:
Why? The Public release have all of updates
Click to expand...
Click to collapse
Sorry I missed, thanks!
spakkkk said:
Im with LOS and works fine
Click to expand...
Click to collapse
What ROM do you use?
Can u gimme a link?
Thanks!
bozarjoska said:
What ROM do you use?
Can u gimme a link?
Thanks!
Click to expand...
Click to collapse
blankaf AFH
wow, another kernel here. anyway thx all you guys for time spent on chiron
For global rom it's working or not?
spakkkk said:
I tested on some ROMS and so far everything is OK
This kernel is for custom roms only, not MIUI's.
Click to expand...
Click to collapse
@sparkkk I know not many devs make MIUI kernels, but we have the Épic ROM, which is based on MIUI and still needs an custom kernel. Could you please - just once - compile your kernel for MIUI. We're in desperate need of an MIUI cunstom kernel
UnknowenDev said:
@sparkkk I know not many devs make MIUI kernels, but we have the Épic ROM, which is based on MIUI and still need an custom kernel. Could you please - just once - compile your kernel for MIUI. We're in desperate need of an MIUI cunstom kernel
Click to expand...
Click to collapse
I'm sorry for disappointing you, but I'll keep it on AOSP/OS only mate
aleksgiab said:
For global rom it's working or not?
Click to expand...
Click to collapse
Unfortunately it does not, this is only for AOSP/LOS/RR kind of Roms
Sent from my MI Mix 2 using XDA Labs
Everything working great so far on Omni!
This kernel supports MIUI and custom ROMS based on Pie only
Main features:
- Based on the latest Pie source from LineageOS, Kernel is compatible with custom ROMs
- Upstreamed to Linux 4.9.202
- Upstreamed to CAF LA.UM.7.3.r1-08200-sdm845.0
- Spectrum profiles
- Compiled with GCC 9.2
- Flash and forget
User features:
All these features can be used via EXKM app
- Vibration Control
- KCAL (Colour control)
- Klapse
- Sound Control
- Minimum Brightness Control
- MAC Randomization
- USB Fast Charge
- Flicker free mod (DC dimming)
CPU features:
- CPU Governors: Schedutil
- Schedutil updated with patches from newer Linux versions
- CPU idle improvements by kerneltoast
- CPU input boost
- RCU boost
- Power Saving Work Queues
GPU features:
- 770 MHz and 820 MHz overclocked GPU steps available (optional) (Use at your own risk)
- ULPS enabled for display panel
File system & memory related features:
- NTFS, exFAT, sdFAT and F2FS file systems supported
- IO Schedulers: CFQ, ZEN, Maple, NOOP, Anxiety, Deadline
- F2FS updated from Pixel 3
- RapidGC for better F2FS performance
- Dynamic F-sync
- CRC disabled for better storage performance
Network features:
- TCP algorithms: Westwood, Reno, BBR, Cubic
- Westwood set as default TCP algorithm
- Wireguard VPN Support
- TTL
Under the hood features:
- Xbox and Dualshock controllers supported with drivers updated to the latest
- Safetynet Flags Removed
- Pixel 3 Energy Model
- Audit disabled for less overhead
- Faster app openings
- Disabled Gentle Fair Sleepers for smoother UI
- 32 bit VDSO
- Unused Drivers And Logging removed for a lighter kernel
Known bugs:
- DC dimming not supported, disable it in MIUI settings
Requirements:
Magisk for recommended kernel settings to set
First Time Installation (clean flash):
1.) Download the Kernel from second post
2.) Have Stock kernel and ramdisk installed
3.) Flash Magisk (optional)
3.) Flash the kernel in recovery
Upgrading the kernel:
1.) Download the kernel from the second post
2.) Dirty flash the kernel (this means flashing the kernel without wiping anything)
Restore stock boot partition guide:
This guide will show you how to restore your ROMS stock kernel and ramdisk without losing any data. It will also uninstall Magisk which can be flashed again. Follow this guide if coming from another custom kernel or if something is not working like spectrum or the config file in twisted kernel.
Method 1:
1) Dirty flash your current ROM. This means installing the ROM without wiping anything.
2) Flash Magisk if desired.
3) You are now ready to flash a custom kernel.
Method 2:
1) Extract boot.img from your currently installed ROMs zip file.
2) Go to the install page in TWRP > Flash image > Select the boot.img you extracted and flash it to the boot partition.
3) Reflash Magisk if desired.
4) You have now restored your stock kernel and ramdisk and can now flash a custom kernel.
Hit thanks or donate to support my work
Donators:
Ricardo
Hellboy4
PM if you want your XDA profile linked on this list
XDA:DevDB Information
Twisted Kernel, Kernel for the Xiaomi Mi 8
Telegram https://t.me/twistedkernel
Contributors
Twisted Prime for doing all this
YTG for testing and support
milouk for build fixes and scripts
blackened mod team for scripts
bgcngm, abhishek987 for maintaining LOS kernel
Akhil Narang for the latest touchscreen drivers
nathanchance for maintaining linux stable repo
osm0sis for anykernel installer
SultanXDA for Simple LMK, CPU input boost and Devfreq boost
kdrag0n for many optimisations
tytydraco for anxiety IO scheduler and DSBoost
flar2 for vibration control and sound control
Joshuous for Dynamic stune boost
tanish2k09 for Klapse
Arter97 for RapidGC and many improvements
Raphielscape, argraur for work on Kat kernel
frap129 for Spectrum
fransiscofranco for Fsync control
Lord boeffla for Boeffla wakelock blocker
Everyone whom I cherry-picked from
Source Code: https://github.com/TwistedKernel/Twisted-845-P
Version Information
Status: Stable
Current Stable Version: V7.6
Created 2019-02-21
Last Updated 2019-11-21
Downloads:
TwistedKernel
Notes:
Twisted Kernel configuration file (Magisk required)
A configuration file is stored in internal storage /TKManager/twistedconfig.txt. You can edit this file to change kernel settings such as, performance profiles, vibration strength, fsync, double tap to wake and SELinux modes. Whatever is set in this file will take effect on boot.
Twisted Kernel log file (Magisk required)
Every boot, a log file is created and stored in internal storage /TKManager/log.txt. It shows the date and time kernel settings are applied. Use this to verify if configuration options are applied.
Applying custom settings
To apply custom settings on boot with a kernel manager, set the boot delay to 50 seconds.
Profiles
Spectrum is a simple, profile oriented kernel manager that allows developers to create profiles to serve to their users. This is useful for users who are inexperienced with kernel tweaking or users who want something that's a single click away.
https://play.google.com/store/apps/details?id=org.frap129.spectrum
USB Fastcharge
This feature increases the maximum charging current from a PC to 900 mA from the default value of 500 mA.
F-sync
Disable this to improve memory speed at the risk of data loss during a system crash. I recommend leaving it enabled if you want to keep your data.
Ho ho, you actually made a thread.
Very nice man, welcome!
Thanks and welcome
sir my touchscreen not working,but in twrp my touchscreen working,,,sorry bad my english,,,,
and thanks for support
xgurame said:
sir my touchscreen not working,but in twrp my touchscreen working,,,sorry bad my english,,,,
and thanks for support
Click to expand...
Click to collapse
Hi, please try this build and tell me if it works.
http://bit.ly/2tGk0Nf
Works great with Havoc
Welcome and thanks for your hard work[emoji13]
Im using your kernel now on pe experience rom with pixutil gov and faced zero bugs so far [emoji106]
Dude could you post balanced and battery settings here or on the op because i want to tweak the kernel by myself?
greetings
Gesendet von meinem Mi 8 mit Tapatalk
darkwader18701 said:
Welcome and thanks for your hard work[emoji13]
Im using your kernel now on pe experience rom with pixutil gov and faced zero bugs so far [emoji106]
Dude could you post balanced and battery settings here or on the op because i want to tweak the kernel by myself?
greetings
Gesendet von meinem Mi 8 mit Tapatalk
Click to expand...
Click to collapse
This kernel is already tweaked for balanced battery and performance. For more battery lower dynamic stune boost values.
Twisted Prime said:
This kernel is already tweaked for balanced battery and performance. For more battery lower dynamic stune boost values.
Click to expand...
Click to collapse
oh ok its already 0 in ex kernel manager settings and deactivated, your magisk module do the same doesn't it?
Gesendet von meinem Mi 8 mit Tapatalk
darkwader18701 said:
oh ok its already 0 in ex kernel manager settings and deactivated, your magisk module do the same doesn't it?
Gesendet von meinem Mi 8 mit Tapatalk
Click to expand...
Click to collapse
TK power saver disables dynamic stune boost when battery is under 30%
Twisted Prime said:
TK power saver disables dynamic stune boost when battery is under 30%
Click to expand...
Click to collapse
ok get you thanks for all [emoji1787]
Gesendet von meinem Mi 8 mit Tapatalk
V4.2 is now available!
TwistedKernelV4.2_Mi8
Changelog:
- Linux 4.9.161
- Updated WiFi driver from CAF
- Added 770Mhz GPU freq
- f2fs improvements
TK Power Saver
TKPowerSaverV2.0 - Compatible with Twisted Kernel V4.1 and up
Very good
V4.3 is now available!
TwistedKernelV4.3
Changelog:
- Linux 4.9.162
- F2FS improvements
- Battery improvements
- Wireguard support
V4.4 is now available!
TwistedKernelV4.4_Mi8
Changelog:
- CAF LA.UM.7.3.r1-06900-sdm845.0 merged
- Linux 4.9.163
- F2FS updated from pixel 3
- F2FS verity enabled
- Updated CFQ
- Klapse support
- Reverted charging current increase
- Enabled tickless when idle
Thanks man.
Will test ASAP
Thanks for sharing.
best kernel for Mi8
nice battery and good performance