Develop Bugs

Ported CM13 From Mediapad X2 to Mediapad M2 8.0

WARNING, YOU ARE INSTALLING AN UNOFFICIAL BUILD AT YOUR OWN RISK. MYSELF OR ANY OF THE CONTRIBUTORS ARE NOT HELD LIABLE FOR ANY DAMAGE OR DESTRUCTION YOU CAUSE TO YOUR DEVICE BY INSTALLING THE ROM.
Installation requirements:
1. Your device must have any android 6 rom installed already
2. Twrp recovery must be installed
Installation:
1. Restart device into twrp recovery mode
2. Make a backup of your firmware
3. Do a full wipe! (System, Data, Cache, Dalvik Cache, (Internal is optional)
4. Install CM13_Port.zip
5. If you need google apps and google services install the desired gapps pack .zip file
6. If you want root access, install SuperSU_v2_71.zip (However it shows under Magisk v12.0 is installed and it says properly rooted)
Download
Rom: Download
Gapps: Download
SuperSU_v2_71.zip: Download
Working:
Bluetooth
Not Working:
-Camera
-GPS (Maybe)
-Wifi
-Sim not detected (However it detects that the sim is a T Mobile sim)
-Smart-cover detection
I want to make this very clear.....I am new on this one. And I need as much help as I can get. I have personally installed this rom on my Mediapad M2 802L to see if this would work. Purpose of doing this, to possibly ignite some devs or part time devs to offer their help instead of allowing this device and thread to die.
XDA:DevDB Information
CM13 Port, ROM for the Huawei MediaPad M2
Contributors
Dvalin21, gaguga, papsi, ajsmsg78
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: Unofficial CyanogenMod
Version Information
Status: Alpha
Created 2017-06-30
Last Updated 2017-07-08

Nice work !!! Im glad to see people working on this device i stopped using mine just because of emui i can't wait to test it but how can i unlock my bootloader and flash twrp after 6.0 update there is no oem unlock in dev settings

@Dvalin21 might I ask you to add 8.0 to the OP name, as one might be mistaken and think this ROM has been ported to M2 10.0 A01-L instead of the smaller M2 8.0 variant.
Sent from my htc_pmeuhl using XDA Labs

5m4r7ph0n36uru said:
@Dvalin21 might I ask you to add 8.0 to the OP name, as one might be mistaken and think this ROM has been ported to M2 10.0 A01-L instead of the smaller M2 8.0 variant.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
Ask and you shall receive

Tried it on my Mediapad M2 801w but it gets stuck on the Huawei boot screen. I left it for about 30 minutes because I know it takes longer on first boot. I might try again without installing gapps.
Thanks for your contribution and hard work to produce a custom rom for this tablet.

dinkmack said:
Tried it on my Mediapad M2 801w but it gets stuck on the Huawei boot screen. I left it for about 30 minutes because I know it takes longer on first boot. I might try again without installing gapps.
Thanks for your contribution and hard work to produce a custom rom for this tablet.
Click to expand...
Click to collapse
Thank you for assisting. I have a feeling this project is really going to be a community effort and not just on my shoulders.
Note: I was suggested to try bring the libril files from the stock rom over to this one. This should make a big difference. Ill try it myself when I get some more time.

i need help!!!

Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.

You should use treble twrp to install rom

JR Bautista said:
You should use treble twrp to install rom
Click to expand...
Click to collapse
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily

MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
update your bootloader to oreo?

JR Bautista said:
update your bootloader to oreo?
Click to expand...
Click to collapse
Yes, 0xC182

MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto

TeamMex said:
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
Click to expand...
Click to collapse
Ok, thanks, friend, I'm going to try it like that

MirandaEduardo said:
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
Click to expand...
Click to collapse
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help

khanpatriot said:
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
Click to expand...
Click to collapse
Yes, this Is a link
https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view

Thanks alot

Oooppss one more query does software channel matter? I'm currently running lineage os 14.1 and i can't find the exact software channel of my device I'm little confused is it retus retail or some other channel. Can u plz help?

[ROM][9]J701F OneUI Port for Galaxy J7 2016/NXT

Hello. This is my J701F OneUI port for J710F
I've ported J701F OneUI TO J710X
So first. What is OneUI:
One UI is a software overlay developed by Samsung Electronics for its Android devices. Succeeding Samsung Experience and TouchWiz, it is designed to be further streamlined, with specific optimizations to ease one-handed use of smartphones with large screens. It was unveiled at Samsung's developer conference in 2018, and first introduced as part of Samsung firmware updates to Android 9.0 "Pie".
Warning: Flash only on J710X|J701X.
Features:
Blue Light Filter
Debloated
De-Knoxed
Some tweaks
Can be rooted(fixes in kernel)
Latest Camera UI
Im not pro in making these lists so idk what else to write here
Has support for Gcam
Bugs:
NFC(J710X)
Download​
V2.1
Changelogs:
HTML:
2019-06-18(V2.1): Use Helios kernel, update apps to latest, update to J701FXXU6CSF2, support for J701F itself, fix model detection, support for gcam, fixed smart view.
2019-06-14(V2): Fix CSC, Display crashes, other kernel updates.
2019-06-11(V1): Initial release
##########################################################################
Hit thanks​
XDA:DevDB Information
OneUI, ROM for the Samsung Galaxy J7
Contributors
ORIGINALNAME123, AnanJaser1211, DarkLord1731
Source Code: http://github.com/j72016/oxygen-j7xelte
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo Bootloader
Based On: Samsung
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2019-06-11
Created 2019-06-11
Last Updated 2019-06-23

Hi, any Screenshots and more changelogs? Thanks for your job

Oh boy oh boy, new Pie+OneUI, downloading right away!
Thanks!

Great! I'm downloading

what is the difference between Refined pie, Blacked OS and this ROM

Radio?

mmxandy said:
what is the difference between Refined pie, Blacked OS and this ROM
Click to expand...
Click to collapse
Yep. Do you have any bug?
What's your phone model?

I have installed this on my device - J710F
Works perfectly
Radio is included
No Bugs as yet.
at start WiFi didn't work but i flashed a WiFi.zip separately and now its working.
Overall BEST Pie Rom.
Bigups to the Developers - Thank you so much and keep up the good work.

Rogerdat914 said:
I have installed this on my device - J710F
Works perfectly
Radio is included
No Bugs as yet.
at start WiFi didn't work but i flashed a WiFi.zip separately and now its working.
Overall BEST Pie Rom.
Bigups to the Developers - Thank you so much and keep up the good work.
Click to expand...
Click to collapse
How to turn headsup off? I also did ADB, but did not work.

I have same problem, but where can I download WiFi.zip for fix the Wifi problem

Try these.
If the first try don't work try again.
https://we.tl/t-KvKmdMkUOG

Still no Luck, more than 10 x tries .....

guys install oxygen kernel ONE-UI - PIE znd for wi-fi working

How the steps ?
1. flash rom
2. flash oxygen
3. flash wifi fix
are these steps right ? Thanks

Bugs: dont mount data via twrp
Show message error when after boot
When go Deepsleep is shoutdown
Fix??

ROM froze up randomly in deep sleep, so basically not usable for me. When I tried to wipe in TWRP, it couldn't access the partitions, had to flash full stock via Odin. J710FN.
EDIT:
juankarlitrox said:
Bugs: dont mount data via twrp
Show message error when after boot
When go Deepsleep is shoutdown
Click to expand...
Click to collapse
Basically this.

gofur.my said:
i have same problem, but where can i download wifi.zip for fix the wifi problem
Click to expand...
Click to collapse
send me pm in telegram @MojtabaRajabi7

for fixing data and wifi your need istalled oxygen kernel for pie android!

Edge Panel Works?

juankarlitrox said:
Bugs: dont mount data via twrp
Show message error when after boot
When go Deepsleep is shoutdown
Fix??
Click to expand...
Click to collapse
fixed deepsleep. will post soon

[ROM] Custom Recovery Flashable Stock Firmware for Realme X [RMX1901]

This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29

Can China variant flash this? Thx

is everything working fine? volte, camera, fingerprint?

At last have been asking Ajit for long time xD

nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.

Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?

can i flash into my china realme x, i am running RMX1901CN_A17 version.

Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.

indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?

About this flashable a07 zip .. Remember in group.. Raunaq ..?
 @4j17h
I asked u about making this zip few weeks ago

Does jio volte work on Indian variant?

ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.

indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.

Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?

Hello, on chinese model I receive error 7 (error patching system image), can you help me?

Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?

phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!

Please make it flashable in Chinese variant too.thanks in advance

How to root this rom? What magisk do you use?

djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.

[PORT]Xiaomi.Eu Stable V11.0.3.0[9.0 PIE] ROM For Max Pro M1

MiUi11 Xiaomi.Eu Stable V11.0.3.0(Android Pie) is up for Max Pro M1
ChangeLog
Brightness Slider Issue Fixed
Video Brightness Fixed
Safety Net Pass Without Magisk
Banking Apps Working Out Off The Box
Added Dirac
Fixed Mi Enhancer
(Need To Enable Mono Audio In Accessibility Setting)
Notification Led Working
(Need To Chose Notification Led Color Red Or Green)
Fixed All Gaming Issue
Improve Network Stability
Vilte Working
October Security Patch
App Drawer Available
Google Feed Available
Lot's Off MiUi11 Features
Bugs
NONE
INSTALLATION PROCEDURE
Flash TWRP
Boot into TWRP
Wipe system+cache+dalvik+data+vendor
Flash the ROM zip as usual as custom ROM
flash magisk if you want Root:fingers-crossed:
reboot system
Enjoy ultrasmooth MIUI:fingers-crossed:​
Sources
kernel sources
https://github.com/KudProject/kernel_asus_sdm660
Rom Source
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/xiaomi.eu_multi_MIMAX3_V11.0.3.0.PEDCNXM_v11-9.zip/download
Donations
you can donate us in various ways for the continues development of the Rom
[email protected] [phonepe]
[email protected] [googlepay]​
Download Links
New Updated Rom Link--
https://androidfilehost.com/?fid=4349826312261654210
New Rom Pro Mode Link--
(Mount System & Flash This)
https://androidfilehost.com/?fid=4349826312261673168
Gaming Server Fix--
(Those User Face Gaming Server Reconecting
Mount Vendor & Flash This)
https://www.androidfilehost.com/?fid=4349826312261654873
Old Rom Link--
https://www.androidfilehost.com/?fid=1899786940962606260
Old Rom Pro Mode Link--
https://www.androidfilehost.com/?fid=1899786940962610062
Our Group
https://t.me/MiUiForX00TD​Kill the thanks button if you like my work :highfive:​
XDA:DevDB Information
MIUI for X00TD, ROM for the Asus ZenFone Max Pro M1
Contributors
RinkuBidhan
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: PIE FIRMWARE REQ
Based On: MIUI
Version Information
Status: Stable
Current Stable Version: 11.0.3.0
Stable Release Date: 2019-12-08
Created 2019-10-12
Last Updated 2019-12-08

For Those User Face Using Wifi & Play Store Show Waiting For Network Follow This Guide
Wifi Paystore Waiting For Network Fix(No need any Install Or Flash)
Connect wifi
Play store download not work
Go to wifi setting click arrow your contacted wifi
Scroll down you see
Ip setting change it to statics
Uper righ side
Show click on it
Done you download app on play store using wifi

Flash Only Those User Face
No Fingerprint Option In MiUi
Go To Recovery
Mount System Vendor & Flash Fingerprint Fix
Fp Fix Link:-
https://www.androidfilehost.com/?fid=1899786940962608087

Anything different then shyamkumar's MIUI11?

Babad00k said:
Anything different then shyamkumar's MIUI11?
Click to expand...
Click to collapse
Yes this is Stable version
Previous Beta version

Hold down the system startup page
Hold down the system startup page

RinkuBidhan said:
Flash Only Those User Face
No Fingerprint Option In MiUi
Go To Recovery
Mount System Vendor & Flash Fingerprint Fix
Fp Fix Link:-
<Mod edit>
Click to expand...
Click to collapse
Hot goods must be tried immediately. I used the version zb602kl 4/64 to not install other versions because there was no fingerprint unlock

Those User Need Indonesia language & Center clock mode For Xiaomi.Eu Stable 11.0.2.0 Rom
Just Mount System & Flash Indo Patch
Link:-
https://www.androidfilehost.com/?fid=1899786940962608104

guide porting ??
<Mod edit: Quoted OP removed>
bro,..can you share giude porting miui 11 ??,

I was install MIUI port
Base on 11 Mi globe
If i'm wanna flash this rom
Is need clean install?

unix_09 said:
I was install MIUI port
Base on 11 Mi globe
If i'm wanna flash this rom
Is need clean install?
Click to expand...
Click to collapse
Always clean install if rom not related to each other..

unix_09 said:
I was install MIUI port
Base on 11 Mi globe
If i'm wanna flash this rom
Is need clean install?
Click to expand...
Click to collapse
Yes

What's new in this update?
Could you please increase the volume of the headphones?

Hello! Is there NFC support in this ROM?

Is everything working in this rom?
Any bugs?

Fix High Brightness In Video
Mount System,Vendor & Flash
https://www.androidfilehost.com/?fid=1899786940962608830

freeque said:
Hello! Is there NFC support in this ROM?
Click to expand...
Click to collapse
The phone doesn't support NFC. How do you expect to use NFC?

SpiralX15 said:
The phone doesn't support NFC. How do you expect to use NFC?
Click to expand...
Click to collapse
Actually the " phone " DOES support NFC.
Its just " your variant/model/SKU of the phone " doesn't support NFC.

Boomshiva said:
Actually the " phone " DOES support NFC.
Its just " your variant/model/SKU of the phone " doesn't support NFC.
Click to expand...
Click to collapse
I just realised that he's in a non-Indian country. The flags are not displayed on mobile for me.

carrier info always pop up