I stuffed up TWRP update - Desire 816 Q&A, Help & Troubleshooting

I have cyanogen mode 13 installed and TWRP 2.8.7.0 and decided to update TWRP thru offical TWRP app and when updating I had the (Allow flashing to boot partition box ticked)
I have tried to update TWRP with box unticked but not working.
When rebooting to recovery it gets to HTC logo saying ENTERING RECOVERY and goes into loop continious.
When I hold volume up and power it will boot to os and normal operation.
Any clues on how to fix boot partition and reinstall TWRP?
kind regards

Solved
I installed an older version 3.0.1.0 TWRP and its fixed

Related

TWRP Boot Loops?

My I747 has been running ok with twrp 2.8.7. and cm 12(latest). After I used twrp manager to install twrp 3.0.1, twrp will boot loop whenever recovery is booted. if I reboot at this point (no buttons except pwr) the system goes to recovery again. I am then able to boot back to download mode via buttons and then continue to rom. I have also tried 3.0,2 and 2.8.7, all the same. I have installed the same set of twrps with flashify, same problem. I then restored a philz bckup from flashify which boots ok. I then installed cwm recovery (newest version) from flashify which boots ok. Basic issue is no recent twrp version will install without going into loop. Any help/thoughts appreciated!!!
i believe an older bootloader can cause this issue. which bootloader/modem are you on ?
"err on the side of kindness"

Unable to boot the device to Recovery mode..

Hi Team,
I am unable to boot into recovery mode. I just have installed OOS 3.5.2 rom through TWRP 3.0.2(1). I am able to boot up the device. Once I complete the setup process, I turned on Advanced options in developers and selected the boot in to recovery.
Device is restarting and then it is stuck at 1+ logo.
I have tried it through boot loader (Vol down and then power button) to start the recovery mode but is also showing 1+ logo and then device got turned off.
Any idea about the issue? Unable to restore backup.
I am completely stuck.
Plz help
Try booting into fastboot flash this version of Twrp
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
Hopefully that will do it but you may need to boot into Twrp right away and reflash twrp-3.0.2-19-oneplus3.img from within Twrp and hopefully it will then stick.
It just worked like a charm.... :good:
3.5.2 Broke TWRP compatibility, there's a new unofficial TWRP available but I can't link to it at present. Although looking now it's in the last post.

NEED HELP, CAN'T BOOT INTO RECOVERY/OS - One Plus 3

I was running an unlocked one plus 3 on OxygenOS 4.0.2 (Android Nougat) and have TWRP installed. As 4.0.3 got released yesterday, i tried installing it today but i accidentally hit install on the OTA update setting which caused my phone to reboot. Now my phone won't boot into the os, i get a black screen after 'powered by Android'. I tried getting into Recovery however i get the same response, a black screen. I do not think it is hardbricked as the Fastboot still works and when i go into fashtboot it states that the OEM is 'unlocked'. I have personal data on this device pls can someone help. I do not know what i should do> How do i boot into recovery without crashing?
Is it possible to install twrp again with the PC? I had once also the same problem, install it again and after that it booted again into recovery.
Just install TWRP from fastboot, then you'll have access to internal storage by TWRP
It's happening because it's trying to send you to recovery which is twrp 3. 0.4-1which is bugged so just go to fastboot and flash twrp 2.0.4-1 and then try booting in.. You can even update the phone by flashing the update zip by oneplus from recovery

[SM-P607] TWRP install issue (recovery boot loop)

Hi all, looking for some help here.
I picked up a pair of P607's to install Lineage on.
1. I flashed (via ODIN) the latest Samsung factory build from Sam Mobile (Now running 5.1.1).
2. Grabbed the latest TWRP tar file (twrp-3.1.1-0-lt03ltexx.img.tar)
3. Flashed TWRP via ODIN (AP button, selected the twrp tar, unchecked auto-reboot)
4. Held power button and turned off.
5. Powered back on and Held the [home - vol up - pwr] to boot into recovery to check TWRP.... and..... Recovery Boot Loop.
Odly enough, if I get it back into download mode and just boot it normally, it will boot fine back into the OS (stock rom, not lineage yet)
I can recover back to the factory by re-flashing the stock rom again, so it's recoverable.
I've tried with two different 3.1 TWRP versions now, twrp-3.1.0-0-lt03ltexx.img.tar and twrp-3.1.1-0-lt03ltexx.img.tar, both do the same thing.
Any ideas on this one?
There's definitely some odd issues with TWRP for this device...
3.1.1 Failed
3.1.0 Failed
3.0.2 Worked and boots into TWRP
Would be nice to get the latest TWRP working for this device, anyone interested in logs from the 3.1.0 or 3.1.1 attempts?
how did you get out of the boot loop? i cant seem to get back in to download mode
XnoteX said:
how did you get out of the boot loop? i cant seem to get back in to download mode
Click to expand...
Click to collapse
Today I got the same bootloop problem.
Impossible to enter the Download-Mode.
I removed carefully the Backcover and disconnect the battery plug for some seconds.
On the next start I´m holding down Vol- and entered Download Mode.
With Odin I flashed TWRP 3.0.2.0 (same version like before) and its working again without loosing the installed programs.
I think you can also wait until the battery is empty .....
Hope it helps a bit to recover a great tablet.
sillysuliman said:
There's definitely some odd issues with TWRP for this device...
3.1.1 Failed
3.1.0 Failed
3.0.2 Worked and boots into TWRP
Would be nice to get the latest TWRP working for this device, anyone interested in logs from the 3.1.0 or 3.1.1 attempts?
Click to expand...
Click to collapse
Most ROMs here install fine with 3.0.2. That's what I am using on my 607T.

My phone is stuck on LG Logo after TWRP update.

Hi,
I've twrp version 3 installed and I've try to update it. I've download latest .img file from twrp official website and flash it via TWRP itself. Than I've just restarted TWRP but the system stucks on LG logo. How can I success to install TWRP again. I don't have anything on the phone so I can remove everything.
Probably you forgot to flash it to recovery partition, default is boot. You can try to go to recovery with the power + vol down buttons, if that wont work go back to stock with kdz or tot.

Categories

Resources