dodocool DC33 - 4-Port USB Hub with 3 Charging Ports and Quick Charge 3.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unboxing
The multifunctional USB hub comes in a eco-friendly package with almost no accessories included: 1x USB-to-USB 3.0 Cable, 1x 15/4A Power Adapter (seems to be an high-quality one) with a Power Cord, 1x User Manual and of course the product itself.
The whole body is made of plastic with no glossy parts but it is pretty to scratch (as you can notice), but it feels solid enough and doesn't seem to have any imperfection. It is also pretty lightweight and unfortunately this isn't always positive because it is too easy to move the hub on a smooth surface.
It is 12.96x5.46x2.37mm, pretty common size for this type of HUB. Some ports on the sides would have been nice.
On the front there are 4x USB 3.0 Ports, 1x 5V/2.4A USB Port, 1x Quick Charge 3.0 USB Port, 1x Type-C Port (max 5V/3A) and a simple power LED, while on the back there is everything required to use the device, including a power button.
There is enough space between each port making it compatible even with oversized USB devices.
It is nice to use a single device for two usages (Data Transfer and Charging), but i would have preferred to have switches for each port in order to turn off devices without having to unplug the cable.
Something interesting is that standard USB Ports are usable even without turning on the PC so, theorically, there are 6x USB Ports that can be used for charging, even though this isn't something reported by the manufacturer.
Efficiency and Performance
Starting from the USB Hub, it is Genesis Logic based (not the best unfortunately like VIA chipsets) and, somehow, my PC recognized two hubs, an USB 3.0 HUB (reported as USB 3.1 for some reason) and an USB 2.0 HUB. It it confusing since only the USB 3.0 ports are available, so i guess the board is also used for other models with more ports. Interesting.
Tested using my Sandisk Ultra USB 3.0 Flash Drive, there doesn't seem to any performance issue and the HUB doesn't got hot while using it.
But...most important, does it charge a smartphone/tablet properly? Yes, it does.
Starting from the 5V/2.4A USB Port, its voltage even on high load is stable and doesn't get lower than 5V, reaching 5.12V at 2A load.
Also each standard USB port can handle 2 amps without any issue, but the voltage in idle is a bit too much high.
The Quick Charge 3.0 port works great as well, charging my Power Bank at maximum QC 3.0 speeds without a single voltage drop.
Unfortunately the USB Type-C port doesn't support USB-PD (Power Delivery) and its voltage gets below the 5V barrier under 2A load meaning that i have some doubts about its maximum supported load. Based on my experience, with this result, it gets can't higher than 2.4A.
Conclusions
Having to deal with a Multi-USB Charger and a separate USB HUB on my desk, the possibility to use something that does both things using less space is just great.
What to say about this device...it is useful for users like me that do not have lots of space available plus it also offers an high level of quality.
Unless you need USB-PD or a more powerful Type-C Port, i can recommend this device.
Pros:
- Compact 2-in-1 design
- Quick Charge 3.0 Support
- No Performance Loss compared to a standard HUB
- Powerful
Cons:
- No USB-PD support
- High 5V voltage in idle
- Slightly under-powered Type-C port
Rating: 8.4
Packaging and Accessories: 7.5
Design and Materials: 8
Performance and Efficiency: 9
Price: 9 (based on Amazon price)
Official Product page: http://www.dodocool.com/usb-hubs-1771/p-dc33beu.html
You can find full-res images (I know, Quality isn't excellent) here: https://imgur.com/a/sUp0g
Related
AUKEY Quick Charge 3.0 Type C Car Charger
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unboxing
Packaging (eco-friendly) doesn’t come with any accessory, just the Instruction Manual, a Warranty Card and the Charger (of course).
Unlike some other devices, this one supports QC 3.0 directly with the USB Type C port. Sincerely, I find it a bit confusing because if you don’t own an USB Type C device, you’ll need to use an USB Type C adapter in order to take advantage of the Quick Charge technology, otherwise you’ll be limited with the Standard VoltIQ USB Ports, without QC tech. It would have been better if this adapter was included.
As regards the Charger, it is made of Plastic, extremely solid and without useless glossy parts that can be scratched easily.
There are 3 USB Ports available, just one of them support Quick Charge 3.0 (USB Type C). The other USB ports supports Standard 5V output, just with another technology called “AIO” from AUKEY that works on the voltage depending on the attached device. It seems to work pretty fine, without voltage issues. Follow my next paragraph to know more.
Also, it is pretty compact, and fits perfectly every type of Car Socket.
Efficiency
I have tested the device using my 1A/2A USB Capacitor to stress everything to the maximum. Unfortunately I can’t test its Quick Charge capability because I need to buy an adapter first, i’ll update this review as soon as I get it. I still have tested the USB Type C port, and it works as good as other USB ports. (5V/3A)
As you can see, under 2A load the voltage is just perfect, 5.00v (on the left, test done in-car). Only at home (on the right), while using a Car Socket adapter, it dropped a bit under 5.00v (4.98v), nothing really important, it probably depends on the Voltage Input that at home might be lower due to the different power supply.
Internal components do not make any kind of strange noise on high-load unlike some other bad chargers.
Conclusions
As always AUKEY releases great accessories, with excellent quality. This device solves almost every problem that you could have if you need to charge multiple devices at the same time, and the Quick Charge could be a life-safer if you forgot to charge your device at home or if you need some urgent battery juice. It’s a pity that they haven’t included any adapter in order to not sacrify Micro-USB devices, but considering its price it is something that could be accepted. Maybe in the next version/revision they’ll include it? Let’s hope so.
So...do I recommend it? Yes, especially if you have an USB Type C device that supports Qualcomm Quick Charge and if you need to charge multiple devices at the same time.
Pros:
- 3 USB Ports (one of which is Type C)
- Qualcomm Quick Charge 3.0 Support
Cons:
- No Power LED
- Quick Charge available only on the Type C port
Rating: 8.5
Packaging and Accessories: 6.5
Design and Materials: 9.5
Performance and Efficiency: 9
Price: 9 (based on Amazon price)
Official Product page: http://www.aukey.com/product/CC-Y3
You can find full-res images (I know, Quality isn't excellent) here: http://imgur.com/a/suLGI
AUKEY Quick Charge 2.0 & 3.0 5 Port USB Wall Charger
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unboxing (QC 2.0 on the left, QC 3.0 on the right)
Luckily I had the oppurtunity to compare both devices, so you’ll see both variants.
Both versions come with an eco-friendly packaging and basic accessories: 1x Micro-USB Cable, 1x Power Plug (mine is an European Version), 1x User Manual, 1x Warranty Card and the Charger (of course).
As regards the Charger, it is made of Plastic, pretty solid but with glossy sides that can be scratched easily, handle it with care. No Chassis differences are there between the two versions, so it makes me think that the only difference is related to the internal motherboard.
There are 5 USB Ports available, and one of them supports Quick Charge (depending on the model you choose, it can be QC 2.0 or QC 3.0). The other USB ports supports Standard 5V output, just with another technology called “AIO” from AUKEY that works on the voltage depending on the attached device. It seems to work pretty fine, without voltage issues. Follow my next paragraph to know more.
As regards the size, this is probably the smaller Multi-Port Charger I have ever tried, super-compact.
Efficiency
All tests have been done using AUKEY’s Cables, in order to get maximum efficiency and to avoid any possible issue.
First of all, I have tested the “AIO” USB Ports using my USB Capacitor (1A/2A), and it is clearly noticeable that there are no issues at all. Stable Voltage.
In order to show you differences between the two Quick Charge versions, I want to show this image (found on the net) first.
So, as you can read, Quick Charge 3.0 uses Dynamic Voltage (starting from 3.2v up to 20v), while Quick Charge 2.0 uses 3 Voltage Steps (5v-9v-12v).
Let’s start with the Quick Charge 3.0 variant, as soon as I have plugged my QC 3.0 power bank, the charger reduced its voltage from 5v to 3.3v, then it gradually increased. At 5V it was able to handle more than 3.5A! That’s even higher than Official Quick Charge spec.
After a while, the voltage increased again, now to 7.24v with 2A load more or less. And so on, up to 12V.
With the Quick Charge 2.0 variant, as soon as I have plugged the power bank, the voltage increased from 5V to 9V, but just for a little while, then it instantly increased to 12V with more or less 1.8A load.
The difference is clearly noticeable, and it is also clear that QC 3.0 version is much more advanced than the previous version. This doesn’t mean that QC 2.0 isn’t good, but it is just different and less efficient.
Conclusions
As always AUKEY accessories are quality-made, efficient and cheap enough. It’s a pity that they choose to use a glossy surface on the sides, but there are no other negative aspects.
So...do I recommend it? If you need to charge multiple devices, and if you have a Quick Charge device, then...Yes. Be careful to choose the right variant depending on your device’s CPU, or just go for the Quick Charge 3.0 variant to avoid mistakes and to be futureproof.
Pros:
- Qualcomm Quick Charge Support
- Compact and Solid
Cons:
- No Power LED
- Useless Glossy Sides
Rating: 8.5
Packaging and Accessories: 7.5
Design and Materials: 8.5
Performance and Efficiency: 9.5
Price: 8.5 (based on Amazon price)
QC 2.0 (PA-T1) Product page: http://www.aukey.com/product/PA-T1
QC 3.0 (PA-T15) Product page: http://www.aukey.com/product/PA-T15
You can find full-res images (I know, Quality isn't excellent) here: http://imgur.com/a/AdU4Y
I bought the 3.0 version and it's great. It's constantly plugged in, charges all my usb devices (garmin forerunner, lezyne bike led light, smartphone etc) and it doesn't get hot.
Plus it's ready when I replace my phone for something with qualcomm quick charge
Great little charger for a very reasonable price.
PA-T15 Port failed
Hi All, bought one of these though Zapals one of the 5 ports failed 2 weeks after i started using it.
Came complete with AUKEY warranty card in original unopened packaging. Went to AUKEY website for warranty and found out they only provide warranty on items purchased direct from them or through Amazon.
Zapals has a 6 month warranty only and you have to ship the lot back at your expense for them to consider that. I am anm overseas customer so its a cost, inconvenience and disappointment.
Poor service by Aukey i would say.
AUKEY 6-Port Desktop Charging Station with Quick Charge 3.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unboxing
It comes with an eco-friendly packaging and basic accessories: 1x Type-C to Type-C Cable, 1x Power Plug (mine is an European Version), 1x User Manual, 1x Warranty Card and the Charger (of course).
As regards the Charging Station, it is made of Plastic, extremely solid and without scratchy parts. Probably the most solid charger I have ever tried.
On the front, there is an useful Power LED (Green) that could be pretty useful if you need to find the charger in a dark room or just to know if it has been plugged properly to the power socket. Its color doesn’t seem to change, so it is just a standard Power LED.
Being a Charging Station, it couldn’t have had few USB Ports. There are 6 USB ports available, 2 of them Type-C with Quick Charge 3.0 support. Unfortunately, there are no full-size USB ports that support QC 3.0 (so, you’ll need an adapter), they support Standard 5V output, just with another technology called “AIO” from AUKEY that works on the voltage depending on the attached device. Follow my next paragraph to know more.
As regards the size, it isn’t bulky neither heavy. Photos tend to make it bigger than how it is for real, so it is better if you follow my measurements.
Efficiency
All tests have been done using AUKEY’s Cables, in order to get maximum efficiency and to avoid any possible issue.
I have tested the “AIO” USB Ports using my USB Capacitor (1A/2A), and the voltage is Stable enough under high-load.
Unfortunately without an adapter I won’t be able to show you any test about Quick Charge 3.0 USB Ports, as soon as I get it i’ll update the review. Anyway, I have tested both USB Type-C ports using my Power Bank, and I haven’t noticed any issue with Standard Type-C USB Output, rated at 5V/3A.
Under high-load (6A more or less), it reached just 41°C.
Conclusions
Being the most particular Charging Station I have ever tried, I can say that it impressed me. Solid Chassis, no Glossy sides, and an huge amount of USB ports makes it almost perfect. As I said for the Type-C Car Charger, it’s a pity that AUKEY doesn’t choose to include a Type-C adapter in order to take advantage of that 2 QC 3.0 USB ports also with other devices that support it but without Type-C support.
So...do I recommend it? Yes, but only if you want to spend some extra money for the Type-C adapter (in case of devices without Type-C), otherwise just go for the standard version without Type-C ports.
Pros:
- Qualcomm Quick Charge 3.0 Support
- 2 Type-C Quick Charge USB Ports
- Well-Designed Chassis
- Power LED
Cons:
- Quick Charge available only on the Type C ports
- No Type-C adapter included
Rating: 8.6
Packaging and Accessories: 7.5
Design and Materials: 9.5
Performance and Efficiency: 9
Price: 8.5 (based on Amazon price)
Official Product page: http://www.aukey.com/product/PA-Y6
You can find full-res images (I know, Quality isn't excellent) here: http://imgur.com/a/UI9Gc
Sorry to dredge up an old review, but I just got this charger and noticed you're using an amp-meter between the charger and device. As do I (just to keep an eye on things).
I've wondered... Would a cheap meter interfere with the Quick Charge signals being exchanged been the charger and device?
CAL7 said:
Sorry to dredge up an old review, but I just got this charger and noticed you're using an amp-meter between the charger and device. As do I (just to keep an eye on things).
I've wondered... Would a cheap meter interfere with the Quick Charge signals being exchanged been the charger and device?
Click to expand...
Click to collapse
It usually won't (cheap or expansive that is), unless you kill the data lines of the USB connection.
Just be sure that the tester itself supports voltages higher than 5V. (Tronsmart and Drok USB Testers are great if you want to spend some extra bucks)
I managed to fry an ultra-cheap USB tester just because the current was too high, like more than 2A on 5V, so be careful about this too.
Anyone know diff between Aukey PA-Y6 60W Type-C 6-Port Charging Station with Quick Charge 3.0 and AUKEY PA-T11 6 Port USB Charger with Dual Quick Charge 3.0 Ports (Malaysia 3Pin) PA-T11. Is it 1 with input port usb-C and another with micro usb? Thats it? As i see both price the same, im using LG G6 thus i mainly using usb-C.
Both RM169( around USD 43)
Thanks in advance.
andrew916 said:
Anyone know diff between Aukey PA-Y6 60W Type-C 6-Port Charging Station with Quick Charge 3.0 and AUKEY PA-T11 6 Port USB Charger with Dual Quick Charge 3.0 Ports (Malaysia 3Pin) PA-T11. Is it 1 with input port usb-C and another with micro usb? Thats it? As i see both price the same, im using LG G6 thus i mainly using usb-C.
Both RM169( around USD 43)
Thanks in advance.
Click to expand...
Click to collapse
In the PA-T11 all USB ports are standard female ports, even the QuickCharge 3.0 ones.
So if you already have USB C to USB C cables, you may go for PA-Y6 and get a USB C to microUSB adapter so you can use with other devices.
In my case, I have QuickCharge 3.0 compliant devices that uses microUSB instead of USB-C, so I've got the PA-T11 and mostly use both QC 3.0 simultaneously with microUSB cables. Eventually I use the QC 3.0 with my Nintendo Switch using USB to USB-C cables.
I guess that internally the PA-T11 and PA-Y6 uses the same or almost same circuits and pieces, changing only the connectors of QC 3.0 ports.
HooToo Shuttle Type C Hub with HDMI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unboxing
It comes in a dual-package with no accessories, it means that there is just the USB Type-C Hub and a nice sheet where everything is well-explained about each connection.
As regards the Materials, it is entirely made of Metal (except the lower side), similar to Apple's Macbook, with a rubberized and well-made cable that has a Metal Connector too.
On the front there is just the HooToo logo, pretty cool with a White LED that turns on when connected to the Device or Power Supply. It works as a classic Power LED, just bigger and stylish.
This is the full-featured (HT-UC001) variant of the Hub, HooToo offers also other variants with less features without HDMI, DC in, etc...
On one side of the device there are 3x USB 3.0 ports (one of them for Charging only) and 1x SD/SDHC/SDXC Slot.
On another side there is 1x DC IN port required to get the pass-through Power Delivery feature used to charge your device in the same time.
On the left side there is 1x Full-Size HDMI port used for Video Output. Remember, it isn't guaranteed that your device supports this feature so please check everything before buying this variant, otherwise get the one without it.
Finally on the right side there is the rubberized USB Type-C cable, with a nice Metal connector that definitely improves its durability.
Real Usage
Unfortunately i don't have a Laptop with USB Type-C, so all my tests were executed on one of my USB Type-C smartphones. It means that i won't be able to provide any video output test because Android doesn't support this feature. (do not confuse it with MHL, it is different and this adapter isn't MHL-enabled, completely different technology)
Just as the most elementary test, i have tested my USB Flash Drive with the device, and it has been immediately recognized without any issue. i know it is a USB 2.0 Flash Drive.
Next i have tested my Sandisk Extreme MicroSDHC card, with UHS-III. Thankfully, it has been immediately recognized (as USB drive) without any issue at all.
Well the charging port is working just fine too, it is a simple charging port (the third USB 3.0 port with a Lightning picture on the left), nothing special to say about it. With DC IN connected, it charges any device connected without using too much power from your device.
I have ordered a USB 3.0 adapter from China in order to the test the Video Output feature, and to provide some USB 3.0 speed tests. This review will be updated as soon as i get it. If you don't have a USB Type-C port, this adapter might be for you
Conclusions
Well this device impressed me for the Materials Quality, it is probably one of the most complete Type-C hubs available but its cost isn't so low too. So...this time it is correct to say that you have to pay in order to get some good quality devices. Except this price issue, that might not be an issue for someone else, i think this is something pretty useful to have for mobility reasons. You can do everything with just a small piece of Metal, it is impressive to see how many features can fit inside.
So...do I recommend it? If you can afford it, and your device supports all features, Yes, otherwise go for the lower variants that allows you to save some money.
Pros:
- Impressive Metal Quality
- Dedicated Charging Port (DC IN & USB Output)
- Cool Power LED (HooToo Logo)
- Supports UHS-III SD Cards
Cons:
- Expensive
- No Type-C adapter included
Rating: 9
Packaging and Accessories: 9.5
Design and Materials: 10
Performance and Usage: 9
Price: 7.5 (based on Amazon price)
Official Product page: http://www.hootoo.com/ht-uc001-usb-type-c-hub-charging-hdmi-apple-pd.html
You can find full-res images (I know, Quality isn't excellent) here: http://imgur.com/a/RIoQD
UCOUSO 14-in-1 USB C Docking Station with USB-PD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unboxing
The Docking Station comes in a nice eco-friendly packaging, with a dedicated 18V power supply required to power-up the whole dock and two replacement rubber stripes with different sizes. Unfortunately it doesn't include a Type-C to USB-A adapter neither a Type-C Power Supply, something i would expect for this price target.
As regards the Materials, the main chassis is made of Aluminum, well polished with no imperfections, while on each side there is a plastic cover. Build Quality is just excellent, nothing to complain about.
On the upper, or front, side there is a plain surface with just the UCOUSO logo and the rubber stripe required reduce the slipperiness of the surface itself, otherwise the laptop would not stay in place.
While on the lower, or back, side there are four rubber feet and the indications for each port. It is weird that there is no model indication anywhere.
Starting from one end of the back side, there is 1x DC Input port (for the 18V power supply), 1x 3.5mm Headphone Jack (Generic USB Audio Card), 1x MicroSD Card Slot, 1x Full-Size SD Card Slot...
Here you can see how both SD Card slots are designed, unfortunately the full-size SD doesn't fit entirely (less than half of it), probably the only design flaw found for this product.
...4x USB 3.0 ports (VIA-branded USB Controller)...
...and finally 1x 10/100/1000MBps LAN Port (Realtek GBe LAN Controller), 2x HDMI Outputs and 1x Mini DisplayPort.
On one side of the dock there is a VGA port, while on the other side there is a USB Type-C input port for USB Power Delivery (not necessary, it works fine even without it) and the main USB Type-C cable.
Usage and Performance
Thanks to this adapter, i was able to test the product using my Laptop that doesn't feature any native USB-C port. Hopefully it will be included in the package for the next revisions, since it expands the product compatibility a lot.
As regards the internal hardware info, it is made of:
1x VIA VLxxx Chipset for the USB 3.0 HUB
1x Another VIA VLxxx Chipset for the Internal USB 2.0 HUB
1x Genesys Logic GLxxxx Card Reader (connected to the USB 3.0 HUB)
1x Realtek RTL8153 Chipset for the LAN Controller (connected to the USB 3.0 HUB)
1x Generic USB Audio Card (connected to a separate USB 2.0 HUB)
1x Unknown Controller for the Video Output Ports (unlisted)
Starting from the USB HUB, it works perfectly with no performance loss compared to the main USB ports, as shown here.
The SD Reader, even if not made by a well-known brand, is excellent, better than the Realtek PCIe SD controller i have on my laptop. Impressive, with no doubts. It supports SD UHS-III cards, tested with a Sandisk Extreme MicroSD card.
Conclusions
I won't stop saying that this is an impressive piece of hardware, but all comes at a cost. Overall, both materials and hardware are 100% premium, it doesn't lack any feature, but it lacks some accessories.
Can it be declared perfect? Surely not, but it gets close. Being a newly released product it is "normal" for companies to place it on the market at the maximum price (see Samsung or other brands with the new flagships), so if you can afford this masterpiece, then i can definitely recommend it, otherwise, wait for some discounts, hopefully coming in the next few months.
Still, if UCOUSO will include some accessories with the next revisions, no one would complain ^^.
Pros:
- Excellent Build Quality
- Impressive SD Reader Performance
- No performance loss using the USB HUB
- Full of any sort of I/O port
Cons:
- Really expensive
- No Type-C to USB-A adapter included for legacy support
- No Type-C Power Supply for USB-PD
Rating: 8.5
Packaging and Accessories: 8
Design and Materials: 10
Performance and Usage: 10
Price: 6 (based on Amazon price)
Official Product page: http://www.ucouso.com/product/alumi...ging-port-dc-4-ports-usb-3-0-docking-station/
You can find full-res images (I know, Quality isn't excellent) here: https://imgur.com/a/JranM
Thanks for the brief review!
Did you try connecting multiple HDD/SSD enclosures (preferably more power hungry ones)? This is usually what shows whether it's cheap crap or good product, as doing power distribution right is not trivial.
Also it would be really interesting to know the performance of the Ethernet port (does it really do Gigabit?).
Handling of multiple monitors is definitely another important topic for such expensive docking station.
For MacBook (and other new gadget) owners it would be also very useful to see how PD pass-through behaves, but I am not sure, whether you have means how to test that... With Type C hub, this is usually the most important feature, to really make it one cable connection to your working place.