i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
renjujvcool said:
Hi Mohamed,
When you try to connect your dead phone to PC, does the PC or phone show any indications of detecting it?
If there's even a slight response like a notification sound in PC or blinking on the Phone LED or screen, there's a good chance we can revive it.
I am telling you this since I have been through this stage a few times.
Click to expand...
Click to collapse
thank you very much for your help .. i managed to unbrick my device with a friend's help .. he said he heated on the memory chips or something like that to make the phone readable .. apparently the flashing problem was my win 10 device because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device
Related
hello All
i did something very very very bad
i was upon to downgrade my D855 from 5.0 to Kitkat but it stop on 17% in pc and 0% on the phone
it still like that for 40 min so i unplug USB and i restart the phone i just get message says (secure booting error) in the up left side of phone and after that black screen and LED (BLUE & RED) i can not get in to download mode but when i try i get this :
Qualcomm HS-USB QDLoader 9008 (COM41)
and when i try to enter to recovery mode i get had to do factory reset and same problem !
so anyone can help me with this ?
Thanks ..
any help plz
Hello.
Move your battery, then replace it.
Flash an official kdz from lg.com with LGflashTool and your phone will restart
Your device is Brick!!
Try to enter Download mode
Flash your device again with LG FLash tools(tot File) or KDZ
i found it holllllaaa
for everyone have this problem, on this link you can fix it
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
i used KIZ file by the way
and i wish frm supervisor to close this subject and write solved on it
thanks.
Some of us are bound to "brick" our Max's at some point, we need a genius that knows the right test points to help us out!
Thanks!
Totally agree. I now manage to boot into EDL and Fastboot, but have a locked bootloader and don't know how to reset the phone
(the only thing I did was an update, then bootloop...)
Help Please..Same with me.
My phone was hardbrick i think.
No download mode, no fastboot mode and my device manager just only recognize as HS-USB Diagnostic 900E
How i can get back to life my phone
Thanks
This should work on Mi Max too:
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page%3D1&mobile=2
Check here: http://en.miui.com/thread-328371-1-1.html
panospc said:
Check here: http://en.miui.com/thread-328371-1-1.html
Click to expand...
Click to collapse
I also posted it here
I am everywhere
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. I am using this method
http://en.miui.com/thread-328371-1-1.html
Everything is good up to when I click on flash. Then I always get the error message.
Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
I was trying to use QFIL to update the phone and get rid of chinese characters,and now my phone is completely blank with no sounds or vibration.The computer still connects to the phone in QFIL but doesnt show as a device on the computer.
Any help in fairly simple language would be great.
alan53 said:
I was trying to use QFIL to update the phone and get rid of chinese characters,and now my phone is completely blank with no sounds or vibration.The computer still connects to the phone in QFIL but doesnt show as a device on the computer.
Any help in fairly simple language would be great.
Click to expand...
Click to collapse
Go to stock recovery if it is possible( both volume + power button) then power off and then press volume up anx cpnnect to pc. What happened now?
Thanks i tried stock recovery nothing happens ie no reaction from the phone,if i hold the power button for a minute and then press volume up and connect to pc the pc bleeps
Does Qualcomm port shows?
Can you use qfil program in this state?
yes qualcomm shows in device manager and qfil seems to work but ends in sahara fail
alan53 said:
yes qualcomm shows in device manager and qfil seems to work but ends in sahara fail
Click to expand...
Click to collapse
qualcomm 9008 or 9006?
Starchm said:
qualcomm 9008 or 9006?
Click to expand...
Click to collapse
qualcomm 9008
got it fixed somehow!
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
metadeivid said:
Very good,I wanted to do a downgroade of marshmallow to lollipop in A G4 H815 of a friend to root it, since Usus in linux salt told me that it could not flash, I had to flash a SALT-compatible-LAF_flash-in-twrp.zip for recovery since this model is Turkish and the official method did not work either ... well to do the downgroade in LGUP while flasehaba LAF partition (which chance ..) Windows failed and restarted alone. (Windows 7 because the 10 did not recognize the usb in any way ..) Now the mvl is stuck in the logo of the Lg with this error .. when trying in download mode the error also appears .. And it restarts again to the logo so on with this error .. I have been searching online and nothing specific for this error only if you enter download mode, but it does not enter and the pc does not recognize it when I connect it ... we have screwed but well (this happens to me for wanting to do favors ...) if you have any advice u help I would really appreciate it .. I slept 3 hours and something and I look like a zombi at work and this afternoon should return your "wonderful" phone. A greeting
Click to expand...
Click to collapse
Has anyone solution for this? I have same issue.
Hello,
You need to put your phone into Qualcomm Dloader mode again.
On the main board of your phone, there is a way to short-connect some two pins to enable the Qualcomm Dloader
and then you need QFIL to load the recovery files onto the phone to enable the normal android download mode.
---------- Post added at 01:50 AM ---------- Previous post was at 01:48 AM ----------
Ask someone who has a octopus box to fix your phone - They can DO it with USB-OVER-NETWORK
The day before yesterday,
My phone became bricked caused by any reason.
I cound download ROM by using Mi-flash or QFIL but nothing happened after successing ROM download.
When I pushed Power key more than 5sec ~ 30sec, it did not blink led nor vibrate, keep black screen,
And PC lost connection and recover it as "9008" again.
PC could always
detect my phone as "Qualcomm HS-USB QDLoader 9008".
How can I recover my phone?
Please help me escape from nightmare.
Josephjin said:
The day before yesterday,
My phone became bricked caused by any reason.
I cound download ROM by using Mi-flash or QFIL but nothing happened after successing ROM download.
When I pushed Power key more than 5sec ~ 30sec, it did not blink led nor vibrate, keep black screen,
And PC lost connection and recover it as "9008" again.
PC could always
detect my phone as "Qualcomm HS-USB QDLoader 9008".
How can I recover my phone?
Please help me escape from nightmare.
Click to expand...
Click to collapse
Flash again with qfil.
Palash9088 said:
Flash again with qfil.
Click to expand...
Click to collapse
I did more than 10times but the result was same.
Thanks,
Josephjin said:
I did more than 10times but the result was same.
Thanks,
Click to expand...
Click to collapse
u need to do unbrick using the deep flashing cable..
These links should help you.
https://forum.xda-developers.com/lenovo-zuk-z2/help/hard-bricked-trying-to-restore-twrp-t3747602
https://zukfans.eu/community/thread...-from-hard-brick-state-9008-mode-easily.3504/