Please help!! - Samsung Galaxy A3, A5, A7 (2017) Questions & Answe

I recently tried to root my device by using Odin to flash CWM onto the phone, and then from there i tried installing Super user in recovery mode, but after restarting my phone, it popped up with "Verification Failed, Unable to restart your device. The integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data." And it has a reset button below. I regretfully didn't backup my device and I don't want to lose all my data. Please help :crying:
P.S. I am using an Samsung Galaxy A5 2017 and it is on latest firmware (7.0. Nougat)

Boot into cwm and flash that ZIP http://androidfilehost.com/?fid=24591000424951049 and then reboot

flozge said:
Boot into cwm and flash that ZIP http://androidfilehost.com/?fid=24591000424951049 and then reboot
Click to expand...
Click to collapse
I did not worked, stuck on samsung logo

Related

[Q]briked S3 i747

I tried to factory format my phone through TWRP, then when I tried to restart again, it never comes back.
I still have access to TWRP, but when I install zip files I downloaded, it always failed. I tried to use Odin, it failed to flash an image in.
Plz help me.
Many thanks.
Gambinohe said:
I tried to factory format my phone through TWRP, then when I tried to restart again, it never comes back.
I still have access to TWRP, but when I install zip files I downloaded, it always failed. I tried to use Odin, it failed to flash an image in.
Plz help me.
Many thanks.
Click to expand...
Click to collapse
What format option did you select in TWRP and hope you didn't accidently remove your OS? The device could fail to boot if you don't have an OS installed. You may be able to flash a complete stock restore image via TWRP. Would you recall what Android version you were on before the brick? Also what is your phone model and carrier?
Larry2999 said:
What format option did you select in TWRP and hope you didn't accidently remove your OS? The device could fail to boot if you don't have an OS installed. You may be able to flash a complete stock restore image via TWRP. Would you recall what Android version you were on before the brick? Also what is your phone model and carrier?
Click to expand...
Click to collapse
Mine was ATT S3 I747 with Android 4.3 system. I did wipe my OS during recovery. That caused the whole problem. Then I use TWRP to flash a system and a kernel in. I was unable to flash bootloader and modem in; I did not know what is the problem. The weird thing is that I successfully start my phone and used it for a while. When I rebooted it, it dies again. I tried to install the some boot update in this January. It never works again. Any advise?
Gambinohe said:
Mine was ATT S3 I747 with Android 4.3 system. I did wipe my OS during recovery. That caused the whole problem. Then I use TWRP to flash a system and a kernel in. I was unable to flash bootloader and modem in; I did not know what is the problem. The weird thing is that I successfully start my phone and used it for a while. When I rebooted it, it dies again. I tried to install the some boot update in this January. It never works again. Any advise?
Click to expand...
Click to collapse
You can try flashing a complete stock system to get your phone back to working condition. Since you already had 4.3, flashing zips often fails if there is a bootloader incompatibility. The stock restore should do it. Please go to the following thread ....
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip to your PC. Use another device or something to load it to a (micro) SD card. Insert the card into your phone. Boot into recovery mode and flash from TWRP. When done, wipe your cache/dalvik and reboot to system. Let's know if this works for you.

messed up using flashfy

I tried to flash CMW touch using flashfy and when I reboot in to recovery is is what I got RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
PLEASE HELP Just got the phone today..
I need help as well!
Hello, I messed up my phone (soft brick) flashing things using Odin, etc. I think I need either:
A new PIT file for samsung n900T
A serial number for samsung n900t so that I can use kies to restore it (will this fix a broken PIT file?)
I have tried pretty much everything else. I have a IMEI on the back of my phone but no serial number, no idea why that is.
Can anyone help me with either of these? Thanks very much!
Ryle
phillipmckinnish said:
I tried to flash CMW touch using flashfy and when I reboot in to recovery is is what I got RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
PLEASE HELP Just got the phone today..
Click to expand...
Click to collapse
Take out your battery and boot normally. If you are stuck in a boot loop, try holding down the "volume down" button, the "home" button, and the "power button" to boot into bootloader mode, but when the warning pops up to continue booting into bootloader mode or to restart phone, try restarting the phone instead.
Once you are booted up, download the twrp recovery for our phone instead of the cwm, not from the flashify app, from the actual twrp website.
TWRP download site: https://dl.twrp.me/hltetmo/
Once you have it downloaded, unzip the file, then take the image and transfer it to your phone.
Use flashify to flash the twrp image, then try rebooting into recovery again. You should be able to back up/restore your phone, wipe various things, install custom roms, etc.
You will not need a pit file if you do not need to partition the phone memory. Try to flash a stock rom via Odin.

My device not responding and stuck on samsung logo

Hi evreyone !
My device Galaxsy j2 dont responed and stuck on samsung logo
I try this :
A.hard reset using recovey mod but recovrey lock and i cant use factory reset ( when i press factory reset the device write " factory reset is disable")
B.i try to flash the original rom using odin but i get failed message .
Bootlooder is disable
Adb dbuging is also disable and i have no idea what to do:crying:
Thanks in advance
Up ..guys help plzz:crying:
Hey friend,
If Your Device Is Rooted, Boot Into TWRP Recovery And Wipe Data/Wipe Cache/Format/data.
Then Download The Latest Firmware For Your J2 And Flash Through ODIN V3 Only.
It Will Repair Itself.
If It Is Not Rooted, Also Do The Same.
It will Wake Up.OK
But the device not root and factory reset is disbale..
Guys..
Most of the Odin failed message arises from incorrect drivers and loose USB attachment. Check both and boot ur phone into download mode and flash official stock rom.

Not able to install twrp

Hi..i have a Samsung galaxy grand...it is not rooted...i tried to install twrp recovery using odin...it was successful but once i boot into recovery it shows system recovery...and the device status too change from custom(after flashing using odin) to official after restart. Please help me
Hey...the problem is solved...i disabled auto restart and it worked...but now there is another problem...when i backup my system the phone automatically restarts after some time without completing the backup...my twrp version is 2.8.6.0. Is there something wrong with my twrp version or something else...please help...

Tablet wont reboot in recovery mode after flashing TWRP

Hi to everyone.
Recently, I wanted to mod my tablet (SM-T805 chagalllite) and install the TWRP, and then a custom ROM. I followed a guide, dowloaded the twrp.img.tar file, dowloaded ODIN (3.13) and continued. I started my tablet in Fastboot/Odin mode, selected the file under the AP checkbox, connected it to the computer and then flashed the recovery. It said PASS and immediatly after it rebooted I pressed the key combo Power+Home+VolUp but it started normally. When I returned to the fastboot mode, it said KNOX WARRANTY VOID 1, so it did something. But simply the recovery wont start up, although I retried another 3 times. I tried with the AutoRoot package, it did the red android thing, the SuperSu app was there but the Root Binary wasn't. Any help?
P.S:
The twrp and odin are both at last version.
Nevermind, I solved my problem. I installed CF Autoroot which reinstalled stock recovery, and flashed TWRP using its official app.:good:
I need help was using twrp 321 some thing for quite a while and had no issues flashing ROMs back up ect. But I tried to do a restore and it failed due to , unable to mount system.
Ok no problem i thought I'll reboot and try again. Only now twrp loads the splash screen then reboots it self. IV tried updating to latest version with Odin still doesn't help. Samsung t805 here please help
t1m0thy001 said:
I need help was using twrp 321 some thing for quite a while and had no issues flashing ROMs back up ect. But I tried to do a restore and it failed due to , unable to mount system.
Ok no problem i thought I'll reboot and try again. Only now twrp loads the splash screen then reboots it self. IV tried updating to latest version with Odin still doesn't help. Samsung t805 here please help
Click to expand...
Click to collapse
Ok I fixed it the back up from twrp curreupted the recovery partition. Even reinstall twrp doesn't work or trying to get the stock recovery. To fix it you need to download the entire stock ROM and install the ap via oden in odin mode. My system didn't even boot stock but this fixed the recovery partition and could flash twrp and install a custom ROM

Categories

Resources