im going crazy digging for the cause of my problems.first i love one plus .and its probably not there fault.. everything is being hacked ..spied on.so im find interesting things as i dig .and i apologize im in a hurry im at work...let me know<?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<p att="wns.heartbeat" />
<p att="agoo_action_heart" />
<p att="agoo_action_re_connect" />
<p att="com.xiaomi.push.PING_TIMER" />
<p att="com.netease.pushservice.core.PushLMessageService_V2" />
<p att="com.sina.heartbeat.action.1004" />
<p att="com.sohu.push.action.HEARTBEAT_WAKEUP" />
<p att="com.sohu.push.action.HEARTBEAT" />
<p att="com.youku.pushsdk.pushservice.ALARM_TICK" />
<p att="action_keep_alive_after_send_end" />
<p att="com.eg.android.AlipayGphone.push.action.AMNET_ALARMTIMER" />
<p att="ctrip.android.viewushsdk.action.response_timeout" />
<p att="com.baidu.android.push.intent.KEEP_ALIVE" />
<p att="AlarmTaskSchedule.com.sdu.didi.psnger" />
<p att="com.taobao.accs.intent.action.COMMAND" />
<p att="alarm.push.timer.action" />
<p att="push_heart_beat" />
<p att="anetwork.channel.intent.action.COMMAND" />
<p att="com.dianping.push.KEEP_ALIVE" />
<p att="com.baidu.news.action.heartbeart" />
<p att="com.android.eguan.drivermonitor" />
<p att="com.jingdong.jdpush.msgcenter.action" />
<p att="com.tencent.android.tpush.service.channel.heartbeatIntent" />
<p att="com.xunlei.xlkdemo.timer.action_" />
<p att="com.xunlei.acc.sdk.vip.keepLiveTimerAlarm.40.1471910163480" />
<p att="com.tencent.mtt.service.ACTION_HEARTBEAT" />
<p att="com.android.coll" />
<p att="com.skynet.push.message.send.return" />
<p att="ctrip.android.viewushsdk.action.reconnect" />
<p att="ctrip.android.pushsdk.heartbeat" />
<p att="com.eg.android.AlipayGphone.push.action.CHECK" />
<p att="com.dianping.push.RECONNECT" />
<p att="com.sankuai.mtmp.keepalive.send" />
<p att="iQiyiPushService.SCHEDULE_CONNECT" />
<p att="com.taobao.taobao.intent.action.COCKROACH" />
<p att="action_ping" />
<p att="com.ifeng.news2.action.HEART_BEAT" />
<p att="netease.pomelo.push.dl.new.messageservice_V1" />
<p att="com.baidu.news.action.push_start" />
<p att="com.roger.alarm" />
<p att="com.baidu.kspush.homework.action.check_service" />
<p att="com.youku.pushsdk.pushservice.ALARM_DATA_COLLECT" />
<p att="com.gieseckedevrient.android.intent.PING.com.cmbchina.ccd.pluto.cmbActivity" />
<p att="io.rong.push.intent.action.HEART_BEAT" />
thetes a couple of strings there youll find it
theres slot more ill post later
Ouch.. Someone explain I do hope this is not true.
sorry im still working...and theres a possibility it might not be pre installed..but if you all recall the time i posted about all builds from factory had malware spyware pre installed...and few months later they finally announced that there were pre installed malware and spyware ...its just how everything is these days .every app you name it .i spend hours upon hours a week digging and looking.. weird hobby i know ....ill try to post the rest when i get off
by the way if you are as crazy about whats coming or going .the a really bad ass app from the market ..?.? connects..?? download and watch
borisbwhacking said:
by the way if you are as crazy about whats coming or going .the a really bad ass app from the market ..?.? connects..?? download and watch
Click to expand...
Click to collapse
There are alot of things that raise many questions like this
att="com.xiaomi.push.PING_TIMER
This is completely different OEM all together.
This is another reason why I will personally never trust/use their stock software
zelendel said:
There are alot of things that raise many questions like this
att="com.xiaomi.push.PING_TIMER
This is completely different OEM all together.
This is another reason why I will personally never trust/use their stock software
Click to expand...
Click to collapse
yes your right .it came through ota...im finding major issues keylogger snapshots .theres alot ...ive been watching every connection i can and trace it back..its a weird hobby i know.but if there peeping at me .then uts my turn to watch them.lol
i flashed kali over it after i found these .i have it on all my devices.kali that is .. everything has a virus or spyware.its almost you can't avoid it anymore
well then, since you like this stuff, i encourage you brother to release a debloater script :good:
So good of you to post about spyware without any proof or technical details whatsoever. This is so helpful to everyone.
P.S. I recently found that OnePlus comes pre-installed with system app which can be triggered to wait for the user to grab their phone (uses accelerometers, prox sensor and generic facial recognition) and then overloads the battery to explode the phone. Holy **** did you know this?!!!!111 I am at work right now so I can't post details but I definitely, definitely will later!
This thread is bad and you should feel bad.
Keep hacking the Gibson champ.
look what i found...https://www.engadget.com/2017/10/11/oneplus-oxygenos-data-anonymity/
Darkje said:
Ouch.. Someone explain I do hope this is not true.
Click to expand...
Click to collapse
its true look here https://www.engadget.com/2017/10/11/oneplus-oxygenos-data-anonymity/.im very disappointed in them ..and im not crazy...
borisbwhacking said:
its true look here https://www.engadget.com/2017/10/11/oneplus-oxygenos-data-anonymity/.im very disappointed in them ..and im not crazy...
Click to expand...
Click to collapse
That's not malware.
Puddi_Puddin said:
That's not malware.
Click to expand...
Click to collapse
That depends on your definition of it. Something like this without disclosure upfront can be see as Malware depending on security requirements.
It seems the Notification activity name of Chinese App…As we know,the GCM(Google Cloud Message) push service is not available in China.So many of Chinese App have their own push service.Like the xiaomi.push,is a push service which maintained by Xiaomi, used by many Chinese Apps.
delude101 said:
Keep hacking the Gibson champ.
Click to expand...
Click to collapse
ahh we have a smart ass in the crowd ..theres always one if not several.hiding behind the screen talking **** .its the only place you can hide and be talking ****...
Related
As you all know, a lot of new ROMs (including mine) are shipping with UC support built in.
Now for a while, I've been pondering how I could use UC to auto-create my email account on each flash - to easily setup my testing. Ponder no more.
In the SDConfig.txt file, you need to have an entry to the XML file we create later on. This will be a line like:
Code:
XML: \Storage Card\Setup\Email.xml
Within this Email.xml file, we want to setup the user account. For exchange, we use the following:
Code:
<wap-provisioningdoc>
<characteristic type="Sync">
<characteristic type="Settings">
<parm name="SyncWhenRoaming" value="1"/>
</characteristic>
<characteristic type="Connection">
<parm name="Domain" value="mydomain"/>
<parm name="Password" value="mypassword"/>
<parm name="SavePassword" value="1"/>
<parm name="Server" value="my.exchange.server.com"/>
<parm name="User" value="My Name"/>
<parm name="URI" value="Microsoft-Server-ActiveSync"/>
<parm name="UseSSL" value="1"/>
</characteristic>
<characteristic type="Mail">
<parm name="Enabled" value="1"/>
<parm name="EmailAgeFilter" value="3"/>
</characteristic>
<characteristic type="Calendar">
<parm name="Enabled" value="1"/>
<parm name="CalendarAgeFilter" value="5"/>
</characteristic>
<characteristic type="Contacts">
<parm name="Enabled" value="1"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
After replacing the required details, this should setup all that is required for Outlook Mobile to query your Exchange server.
Ah you say, but my mail account is POP3. Ah ha I reply, you'll need to use the following code in Email.xml.
Code:
<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{4FE84006-9E8A-4158-864D-A2E1E98C3786}">
<parm name="SERVICENAME" value="My Account Mail" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="pop.server.com" />
<parm name="OUTSERVER" value="smtp.server.com" />
<parm name="AUTHNAME" value="myusername" />
<parm name="AUTHSECRET" value="mypassword" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="[email protected]" />
<parm name="NAME" value="My Name" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
"Ahhhh" I hear you say not wanting to be out done, "but I use POP3 over SSL!". You see me chuckle, as you realise I have an answer. Use the following between AUTHSECRET and DOMAIN:
Code:
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
8128000B is for incoming SSL, while 812C000B is for outgoing SSL.
Oh, and if you want to use SMTP auth for sending mail, add in the following after OUTSERVER:
Code:
<parm name="AUTHREQUIRED" value="1"/>
Here my children ends the lesson on auto-provisioning email accounts the UC way. Go forth and use this knowledge to make your lives much, much easier.
Happy Flashing.
Same works fine for IMAP, can be found in the UC thread
Great job CRCinAU, you should Wiki this!
Heh - I have enough on my plate at the moment... Just drawing my testing to a close on Release 10.3 of my ROM - including a new battery driver that does readings in 1% increments I'll hopefully have it ready for release in about an hour.
Your wisdom astounds me O sage philosoph! So I come to you with true hope rising in my heart. In many lands have I sought this answer and truly despair had threatened to overtake me.
Can it be that light breaks through the clouds of my despondency? Are you the promised one, he who holds "the answer?"
can UC be configured to populate the device name and owner information fields so that we need not repeat that ritual after every flash?
I promise to shower you with praise should you deign to craft the spell that will accomplish this feat!
Your humble and unworthy servant.
if you need a tool which creates the provisioning files for you, try
Personal OEMIZER
which can be found here: www.tierman.net
cyberscribe said:
Your wisdom astounds me O sage philosoph! So I come to you with true hope rising in my heart. In many lands have I sought this answer and truly despair had threatened to overtake me.
Can it be that light breaks through the clouds of my despondency? Are you the promised one, he who holds "the answer?"
can UC be configured to populate the device name and owner information fields so that we need not repeat that ritual after every flash?
I promise to shower you with praise should you deign to craft the spell that will accomplish this feat!
Your humble and unworthy servant.
Click to expand...
Click to collapse
if u go to the uc thread i think post 17 it mentions a tool which can do exactly that all though idk about all the poetry but yea check it out in the development forum
Dude, you ROCK!
download size limit
does someone know how to set the download limit of emails (size) ?
with these settings all attachements will be downloaded also, or am i wrong ?
petervbeck said:
does someone know how to set the download limit of emails (size) ?
with these settings all attachements will be downloaded also, or am i wrong ?
Click to expand...
Click to collapse
Ahhh, a worthy question!
The answer you seek is a reverent one. Add the following below the NAME parm.
Code:
<parm name="RETRIEVE" value="0" />
Now with all true options in life, there are multiple values you may use. Specify a value of 0 to say that you only want to download headers. Specify a value of -1 (or 4294967295) if you want to download all messages.
I can also see more questions brewing, so I shall also list you these.
Code:
<parm name="KEEPMAX" value="0" />
Specifies the maximum size (in KB) for message attachments to be downloaded. Attachments that are larger will remain on the server, but the message itself will still be downloaded. Use a value of 0 to specify that you do not want any message attachments. Use a value of -1 (or 4294967295) to specify that you want all message attachments, no matter how large.
Code:
<parm name="LINGER" value="0" />
How often perform scheduled sends/receives in minutes. Beware however, if a value is not provided for LINGER, the automatic connection sync setting defaults to every 15 minutes. You should set the LINGER parameter to 0 to never connect automatically.
Code:
<parm name="FORMAT" value="1" />
Specifies which format to use for downloading and composing new e-mail messages (1 for Plain Text, and 2 for HTML). The default is HTML, however a true sage will only ever require Plain Text
CRCinAU, thank you very much! missing this option was quite annoying to me because i had to change these options manually everytime!
If we ever meet, you'll get a Guinness from me!
Thanks again!
egoist6 said:
if you need a tool which creates the provisioning files for you, try
Personal OEMIZER
which can be found here: www.tierman.net
Click to expand...
Click to collapse
Looked to no avail... just Pamela Anderson videos
Here's everything together for POP3 except for TAGPROPS for SSL. I've also added DWNDAY for the # of days to download.
Code:
<characteristic type="EMAIL2">
<characteristic type="{05250a7a-21ff-4119-a4a5-046cfe884082}">
<parm name="SERVICENAME" value="[I]My Account Mail[/I]" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="[I]pop.server.com[/I]" />
<parm name="OUTSERVER" value="[I]smtp.server.com[/I]" />
<parm name="NAME" value="[I]your name[/I]" />
<parm name="AUTHNAME" value="[I]your account name[/I]" />
<parm name="AUTHSECRET" value="[I]your account password[/I]" />
<parm name="DOMAIN" value="[I]your domain if needed[/I]" />
<parm name="REPLYADDR" value="[I]your reply to address[/I]" />
<parm name="LINGER" value="30" />
<parm name="RETRIEVE" value="-1" />
<parm name="KEEPMAX" value="-1" />
<parm name="DWNDAY" value="7" />
<parm name="AUTHREQUIRED" value="1" />
<parm name="FORMAT" value="2" />
</characteristic>
</characteristic>
You can generate your own GUID here.
While were at it I also connect to wifi to download email after a flash because reception is horrible where I live. In order to do so I need to type in my WEP key - another step. Add this to your provisioning.xml file and have sdautorun setup wifi too
Code:
<characteristic type="CM_WiFiEntries">
<characteristic type="[I]Your SSID[/I]">
<parm name="DestID" value="{436EF144-B4FB-4863-A041-8F905A62C572}"/>
</characteristic>
</characteristic>
<characteristic type="Wi-Fi">
<characteristic type="access-point">
<characteristic type="[I]Your SSID[/I]">
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}"/>
<parm name="Encryption" value="0"/>
<parm name="Authentication" value="0"/>
<parm name="Hidden" value="0"/>
<parm name="KeyProvided" value="0"/>
<parm name="NetworkKey" value="[I]your network key[/I]"/>
<parm name="KeyIndex" value="1"/>
<parm name="Use8021x" value="0"/>
</characteristic>
</characteristic>
</characteristic>
The GUID for CM_WiFiEntries in this example is directed to the internet network. You can also choose "{A1182988-0D73-439e-87AD-2A5B369F808B}" for the work network.
Under wifi you can choose "ad-hoc" instead of access-point for a computer to computer connection.
Authentication will allow for open (0), shared (1), WPA (3), WPA-PSK (4) or WPA-NONE(5).
For a full list of parameters check out MSDN. Other options are EAPType and Filter to filter out specific network types.
Funky B said:
Authentication will allow for open (0), shared (1), WPA (3), WPA-PSK (4) or WPA-NONE(5).
Click to expand...
Click to collapse
There are a couple others on this too that aren't documented..
Authentication:
6 = WPA2
7 = WPA2-PSK
Encryption:
0 = Encrypt using 802.11 wired equivalent privacy (WEP) key.
1 = No encryption.
4 = Encrypt using Temporal Key Integrity Protocol (TKIP) sequence counters.
6 = Encrypt using Advanced Encryption Standard (AES).
OK guys, thank you so much for educating us!
Now that THAT'S said....
Please tell me what I'm doing wrong.. Tasks isn't in the XML so I added it along with the download the last 30 days, entire messages. Tasks blows up the XML and when I remove everything works except it wants to download the last 3 days and not the netire message...
Here's my email.xml
<wap-provisioningdoc>
<characteristic type="Sync">
<characteristic type="Settings">
<parm name="SyncWhenRoaming" value="1"/>
</characteristic>
<characteristic type="Connection">
<parm name="Domain" value="xxxx"/>
<parm name="Password" value="xxxxxxxx"/>
<parm name="SavePassword" value="1"/>
<parm name="Server" value="mail.xxxx.com"/>
<parm name="User" value="puttingham"/>
<parm name="URI" value="Microsoft-Server-ActiveSync"/>
<parm name="DWNDAY" value="30" />
<parm name="UseSSL" value="1"/>
<parm name="RETRIEVE" value="-1" />
</characteristic>
<characteristic type="Mail">
<parm name="Enabled" value="1"/>
<parm name="EmailAgeFilter" value="3"/>
</characteristic>
<characteristic type="Calendar">
<parm name="Enabled" value="1"/>
<parm name="CalendarAgeFilter" value="5"/>
</characteristic>
<characteristic type="Contacts">
<parm name="Enabled" value="1"/>
</characteristic>
<characteristic type="Tasks">
<parm name="Enabled" value="1"/>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
With the Tasks like that I get a
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
--------------------------------------------------------------------------------
End tag 'wap-provisioningdoc' does not match the start tag 'characteristic'. Error processing resource 'file:///C:/Document...
</wap-provisioningdoc>
--^
Click to expand...
Click to collapse
so who's gna take the initiative to make one of these up for gmail? ready for people to just put username and password in?!
hm..i'll have a crack i think!
how hard would it be to code a small little program that will generate these XML files for us?
any one got any pointers?
duke_stix said:
so who's gna take the initiative to make one of these up for gmail? ready for people to just put username and password in?!
hm..i'll have a crack i think!
how hard would it be to code a small little program that will generate these XML files for us?
any one got any pointers?
Click to expand...
Click to collapse
dude,
read my post #6.
egoist6 said:
dude,
read my post #6.
Click to expand...
Click to collapse
thats a dead link matey!
duke_stix said:
thats a dead link matey!
Click to expand...
Click to collapse
oh come on. it seems to be only a temporary problem.
if you would google for "personal oemizer" you would have found this link:
http://tiermann.net/index.php?optio...d=3:personal-oemizer&catid=1:Desktop&Itemid=3
which works perfectly.
just to help you out i have attached the tool.
Well, thanks to this thread and Sleuth's UC I've finally got a nice cab file with all my AS settings preconfigured. And in my personal cab I imported my exchange server's security certificate so all is well. Hard to find was how to sync the last 30 days, that's found on page 55 of Sleuth's thread
<parm name="EmailAgeFilter" value="5"/>
Click to expand...
Click to collapse
Still can't enable HTML but that's no big deal. (FORMAT doesn't work )
I carry my last 30 days, entire message with no attachments being dl'ed until I need them.
The entire script is
- <wap-provisioningdoc>
- <!-- Mail2web Settings
-->
- <characteristic type="Sync">
- <characteristic type="Connection">
<parm name="Server" value="mail.xxxxx.com" />
<parm name="AllowSSLOption" value="1" />
<parm name="User" value="dr_puttingham" />
<parm name="Domain" value="estate" />
<parm name="Password" value="is_here" />
<parm name="SavePassword" value="1" />
</characteristic>
- <characteristic type="Settings">
<parm name="PeakStartTime" value="0800" />
<parm name="PeakEndTime" value="1800" />
<parm name="PeakFrequency" value="-1" />
<parm name="BodyTruncation" value="-1" />
- <characteristic type="PeakDays">
<parm name="Sun" value="0" />
<parm name="Mon" value="1" />
<parm name="Tue" value="1" />
<parm name="Wed" value="1" />
<parm name="Thr" value="1" />
<parm name="Fri" value="1" />
<parm name="Sat" value="0" />
</characteristic>
</characteristic>
- <characteristic type="Mail">
<parm name="Enabled" value="1" />
<parm name="MailBodyTruncation" value="-1" />
<parm name="MailFileAttachments" value="0" />
<parm name="EmailAgeFilter" value="5" />
<parm name="FORMAT" value="1" />
</characteristic>
- <characteristic type="Calendar">
<parm name="Enabled" value="1" />
</characteristic>
- <characteristic type="Contacts">
<parm name="Enabled" value="1" />
</characteristic>
- <characteristic type="Tasks">
<parm name="Enabled" value="1" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
Thanks also to egoist6 for the OEMizerlink as I used that to troubleshoot the Tasks not being enabled.
Let me start off by saying that the tweak I used is labeled as being for T-mobile...I don't know if it will make any difference for any other carriers since I can't test, but it made a HUGE difference in my GPS lock times. I can't say if it makes any difference in accuracy, since my GPS already seemed to be plenty accurate, it just took waaaay too long to get a lock before, if at all.
I only recently upgraded to WM6.5, and I hadn't yet bothered to mess with the GPS much until today. Up until now, it would take up to 30 seconds to get a lock while I was outdoors, and indoor locks (or even in a vehicle) would take much longer, or just never happen. I got much better performance before I upgraded my ROM, so I know it wasn't just the places I was trying it.
Today I installed the Wordsmith cab below, and *POW!* I now get locks in less than 2 seconds outdoors, and no more than 5 seconds indoors!! It actually takes longer for google maps to activate the 3G connection for aGPS than it does for it to then lock satellites and update the position
SO, I highly recommend this for any tmo users that think their GPS should lock faster than it does. Anybody else is welcome to try it, but since I don't know exactly what the secret sauce is in this one I can't say if it will help. I know this cab has been floating around, but I was impressed enough with my results that I wanted to make sure it had visibility.
Now, I've also attached fone_fanatic's cab that adds google's aGPS settings. I applied it today prior to the Wordsmith cab, but it only made a small difference. However, this is the cab that got my GPS working so well on my 6.1 ROM, so I'm including it here for anyone who is still needing another solution to improve their GPS performance.
EDIT: yes, for those who might ask, I did run QuickGPS prior to all testing
Works great!
I tried it out tonight on my TP2 with AT&T and it works great!!
Google maps got a GPS lock in just a few secs INSIDE!
Thanks for sharing!
Interesting ... there is a t-mobile section where specific ip address ranges and t-mobile servers are written to the registry, so buyer beware on that front.
Best regards,
-boggsie
Code:
<?xml version="1.0" encoding="utf-8"?>
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver">
<parm name="OldLogFile" value="" datatype="string" />
<parm name="MaxLogFileSize" value="0" datatype="integer" />
<parm name="CurrentLogFile" value="\windows\GPSLogFile.txt" datatype="string" />
<parm name="IsEnabled" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers">
<parm name="MaxBufferSize" value="512" datatype="integer" />
<parm name="SleepOnNoData" value="100" datatype="integer" />
<parm name="OutputBufferSize" value="512" datatype="integer" />
<parm name="InputBufferSize" value="512" datatype="integer" />
<parm name="RetryWaitOnError" value="3" datatype="integer" />
<parm name="CurrentDriver" value="GPSOneDevice" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOneDevice">
<parm name="PollInterval" value="100" datatype="integer" />
<parm name="Version" value="2" datatype="integer" />
<parm name="CommPort" value="GPS0:" datatype="string" />
<parm name="DriverName" value="GPS Device Driver" datatype="string" />
<parm name="FriendlyName" value="QualComm GpsOne Card, version 0.0" datatype="string" />
<parm name="InterfaceType" value="POLL" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOneEmulate">
<parm name="Filex" value="\windows\GPSOneFileSimulation.txt" datatype="string" />
<parm name="FriendlyName" value="QualComm GpsOne File, version 0.0" datatype="string" />
<parm name="InterfaceType" value="File" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOnePort">
<parm name="CommPort" value="GPD10:" datatype="string" />
<parm name="FriendlyName" value="QualComm GpsOne Card, version 0.0" datatype="string" />
<parm name="InterfaceType" value="COMM" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Multiplexer">
<parm name="DriverInterface" value="COM4:" datatype="string" />
</characteristic>
<characteristic type="HKLM\System\CurrentControlSet\GPS Intermediate Driver\Multiplexer\ActiveDevice">
<parm name="Index" value="4" datatype="integer" />
<parm name="Prefix" value="COM" datatype="string" />
<parm name="Context" value="305414496" datatype="integer" />
<parm name="Flags" value="2" datatype="integer" />
<parm name="Keep" value="1" datatype="integer" />
<parm name="Dll" value="GPSID_HTC.dll" datatype="string" />
</characteristic>
<characteristic type="HKLM\Software\HTC\SUPL AGPS">
<parm name="ServerIP" value="10.176.29.225" datatype="string" />
<parm name="DynamicURL" value="lbs.geo.t-mobile.com" datatype="string" />
<parm name="TLSHostName" value="lbs.geo.t-mobile.com" datatype="string" />
<parm name="ServerURL" value="lbs.geo.t-mobile.com" datatype="string" />
<parm name="GPSMode" value="2" datatype="integer" />
<parm name="EnableAGPS" value="1" datatype="integer" />
<parm name="Network" value="T-Mobile Data" datatype="string" />
<parm name="GPRSConnection" value="T-Mobile Data" datatype="string" />
<parm name="PrivacyMethod" value="3" datatype="integer" />
<parm name="EnabledPrivacyMethod" value="1" datatype="integer" />
<parm name="CloseConfirmMsgTime" value="60" datatype="integer" />
<parm name="EnableLocInfo" value="1" datatype="integer" />
<parm name="ServerPort" value="7275" datatype="integer" />
<parm name="QosPerformance" value="89" datatype="integer" />
<parm name="QoSAccuracy" value="50" datatype="integer" />
<parm name="TimeBetweenFixes" value="1" datatype="integer" />
<parm name="NumberFixes" value="999999999" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Software\HTC\SUPL AGPS\DefaultSetting">
<parm name="EnableAGPS" value="1" datatype="integer" />
<parm name="CloseConfirmMsgTime" value="60" datatype="integer" />
<parm name="PrivacyMethod" value="0" datatype="integer" />
<parm name="EnableLocInfo" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\SOFTWARE\HTC\QuickGPS">
<parm name="EnableMultiCertData" value="1" datatype="integer" />
</characteristic>
<characteristic type="HKLM\Drivers\BuiltIn\RIL">
<parm name="AGPSNVSetting" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
Slick. Looks like a cab for most of the settings in the stickied tips thread with some T-Mobile specific aGPS settings. I'll have to try it out, thanks!
I'm glad it's useful!
It's probably worth mentioning that I'm using the .57 radio that came stock in the tmo 6.5 ROM, I'm sure it's part of the combination that makes this work so well...some users have reported improved GPS performance just from switching to that radio.
Thanks for dissecting that boggsie, it looks like it gets in there pretty deep. I honestly haven't been able to backtrack to where I found the cab, I just saw it in a drive-by reading of some thread, and thought it would be good to grab it...guess I was right
The next thing I'd like to know is if this would work the same on the (tmo) HD2...I hope to have one in the next few days, and I don't yet know if all the driver/registry settings it changes apply the same to that phone. If anybody here can answer that, please do...otherwise I'll post it over in that forum for somebody to look at or test
Confirmed Second Success On ATT TP2 GPS
I also got a lock within 5 seconds indoors upon opening Google Maps. Thanks again...This is definately a keeper.
dare i install on my tilt 2 to lower the lock time to under 2 minutes... my att agps settings cab never worked right. at first i thought my gps was broken. i swear the stock att rom did better than the stock htc.
sirphunkee said:
Let me start off by saying that the tweak I used is labeled as being for T-mobile...I don't know if it will make any difference for any other carriers since I can't test, but it made a HUGE difference in my GPS lock times. I can't say if it makes any difference in accuracy, since my GPS already seemed to be plenty accurate, it just took waaaay too long to get a lock before, if at all.
Sorry is T mobile 3g or cdma? as if 3g will give a shot
I only recently upgraded to WM6.5, and I hadn't yet bothered to mess with the GPS much until today. Up until now, it would take up to 30 seconds to get a lock while I was outdoors, and indoor locks (or even in a vehicle) would take much longer, or just never happen.
6.1 was rock solid for GPS lock (talking under 10 sec cold start) but now on 6.5 and has been not at all .. Acquiring Satellites is the most frequent message here in Australia Have HTC trying to find a solution but they sent a cab and its not working well ... started GPS 20 times today and only managed 3 locks, which was really 1 as did not turn off from first destination
Click to expand...
Click to collapse
palah said:
Sorry is T mobile 3g or cdma? as if 3g will give a shot
Click to expand...
Click to collapse
T-Mobile is GSM (i.e., NOT CDMA).
Eleazar Bendixen said:
I tried it out tonight on my TP2 with AT&T and it works great!!
Google maps got a GPS lock in just a few secs INSIDE!
Thanks for sharing!
Click to expand...
Click to collapse
8526WM6 said:
I also got a lock within 5 seconds indoors upon opening Google Maps. Thanks again...This is definately a keeper.
Click to expand...
Click to collapse
Are the both of you just loading the 'FF Google aGPS Settings Generic.cab' or are you also loading the 'Wordsmith9091 T-Mobile GPS Fix.cab'?
I'm also on AT&T, so I'm curious to learn if the T-Mobile cab would be beneficial to me, despite it being T-Mo specific.
Thanks,
Debbie
I am curious also. Stock 6.1 lock time is alot better then my current flashed rom. I think i may bite the bullet and try. Ill let you guys know if it works
rajb1031 said:
I am curious also. Stock 6.1 lock time is alot better then my current flashed rom. I think i may bite the bullet and try. Ill let you guys know if it works
Click to expand...
Click to collapse
I'm using Stock US Tmo ROM, and it definitely speeded up my satellite acquisition time. Good programs!
More than likely your device is always tracking your position now, so when these other apps start your position is already known. This could reduce battery life.
oisact said:
More than likely your device is always tracking your position now, so when these other apps start your position is already known. This could reduce battery life.
Click to expand...
Click to collapse
Any way we could look to confirm if it's doing that? I for one don't have any gps icon on my notification bar. However, when gmaps opens, it initially shows 0 satellites locked, for the first second or so, even after the aGPS link is established, so I dunno if that disproves that theory or not.
I tried it on wm 6.5 standard at&t rom and it actually slowed my lock times. Uninstalled it and now the lock is within 5 seconds, much faster than before I installed/uninstalled this .cab. Not sure what it did or did not change in the registry, but it sure slowed my lock times in tomtom, copilot 8 and google maps. Not sure this will work for anyone other than T Mobile, and certainly did not help my AT&T Tilt2.
Hi!
I'm developing a software for Windows Mobile 6.5 using Compact Framework 3.5.
We need to sync the application with a server component using a network connection proxied by ActiveSync.
Now, some software magically changes the settings for the access to private network.
We need it to be set to "Work", but some other software silently changes this to some other destination.
When the user now tries to connect to our server, she won't be able to get a connection as the CM now tries to establish this connection using UMTS instead of the wired ActiveSync connection.
Now, to solve this problem I digged through documentation and forums to find any information about the CM configuration.
I found that I could automatically correct this problem by using XML Provisioning. I think I just have to remove every key below \\HKLM\Comm\ConnMgr\Providers that starts with "null-corp" and replace it by a new key named "null-corp-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}" with an appropiate configuration.
Doing that by editing the registry manually solves my problem.
Now here's my problem:
When I send a document like this:
Code:
<wap-provisioningdoc>
<characteristic type="CM_ProxyEntries">
<nocharacteristic type="null-corp-{0A0A8396-2C1A-4EC3-A5C4-FA760015DA07}" />
<nocharacteristic type="null-corp-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}" />
<nocharacteristic type="null-corp-{FBF831F6-CCB5-407D-AA6E-FBE981A23D8F}" />
<characteristic type="null-corp-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}">
<parm name="SrcId" value="{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}" />
<parm name="DestId" value="{A1182988-0D73-439E-87AD-2A5B369F808B}" />
<parm name="Proxy" value="new-corp:1118" />
<parm name="Override" value="" />
<parm name="Enable" value="1" />
<parm name="Type" value="0" />
<parm name="ReadOnly" value="0" />
<parm name="Username" value="" />
<parm name="Password" value="" />
<parm name="ExtraInfo" value="" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I get a SystemException in
Code:
Microsoft.WindowsMobile.Configuration.ConfigurationManager.MainConfigurator(XmlDocument configDoc, UInt32 flags)
containing an error code of 2147500037.
The registry isn't changed, connecting to the private corporate network still doesn't work.
I don't know what I'm doing wrong. Is something wrong with my xml code?
Help would be really appreciated!
Regards
Christian Nitschkowski
At the first glance it seems to me you forgot to declare the parameters' datatype as it's demonstrated with this this sample
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKCU\Software\test\testtest">
<parm name="TestValueInteger" value="5" [COLOR="Red"]datatype[/COLOR]="integer" />
<parm name="TestValueBoolean" value="1" [COLOR="Red"]datatype[/COLOR]="boolean" />
<parm name="TestValueString" value="testtesttest" [COLOR="Red"]datatype[/COLOR]="string" />
<!-- multi strings are delimited with -->
<!-- multi strings are terminated with -->
<parm name="TestValueString2" value="string1string2string3" [COLOR="Red"]datatype[/COLOR]="multiplestring" />
<!-- date / time combined to ONE single value -->
<parm name="TestValueDateTime1" value="10/20/01 8:15:04 pm" [COLOR="Red"]datatype[/COLOR]="date" />
<parm name="TestValueDateTime2" value="10/20/01 3:55:04 pm" [COLOR="Red"]datatype[/COLOR]="time" />
<parm name="TestValueBinary" value="5iAGkAbgBhAHIAeQAgAGIAbABvAG" [COLOR="Red"]datatype[/COLOR]="binary" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
So I recently made an android app and published it to the market. However, when i search for my app on my Samsung epic 4g it doesnt show up. I know the app is there and it says that i have published it, but it doesnt appear on my epic. Any ideas why this is? In the manifest of the app i set the minSdkVersion to 5 so it shouldnt filter it out right? is there something special i have to add to the manifest for it to see my app? I would appreciate any help. my current manifest looks like this:
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android=----
package="send.text.fast"
android:versionCode="2"
android:versionName="1.0" >
<uses-sdk android:minSdkVersion="5" />
<uses-permission android:name="android.permission.SEND_SMS"> </uses-permission>
<uses-permission android:name="android.permission.READ_CONTACTS"> </uses-permission>
<application
android:icon="@drawable/ic_launcher"
android:label="@string/app_name" >
<supports-screens android:smallScreens="true"
android:normalScreens="true" android:largeScreens="true"
android:anyDensity="true">
</supports-screens>
<activity
android:name=".Main"
android:label="@string/app_name"
android:screenOrientation="portrait">
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
</manifest>
android:label="@string/app_name"
app_name = don't you have to put the name of the app there? i know html is different, but usually when you didn't do something simple like that, i would get that kind of problem with a webpage. what if you tried doing that?
Instructions
1. First force stop Dead Trigger 2 App in Application settings
2. UNZIP and Just push the attached file to /data/data/com.madfingergames.deadtrigger2/shared_prefs/
3. Done! Enjoy! :laugh:
The Manually method(Reccomended)
1. Force Stop Dead Trigger 2 in settings.
2. Just open up the shared_prefs folder and find the com.madfingergames.deadtrigger2.xml.
3. Next change makes this code the same as this. Just change one value.
Change
Code:
< int name=”UnityGraphicsQuality” value=”[COLOR="Red"][B]3[/B][/COLOR]″ / >
Change
Code:
< int name=”OptionsGraphicDetail” value=”[B][COLOR="Red"]3[/COLOR][/B]″ / >.
4. Save and relaunch, now you have Tegra Graphics for your Non-Tegra Device
You may experience frame drops at times but that's to be expected. These graphics are intense. But, S800 handles it very well!
Works on any device, must be rooted
Thank you, works great on my N9005
What isthe meaning of 0440?
I can enable 044 doing read group and others, but 0440 can't with any combination.
kersh said:
What isthe meaning of 0440?
I can enable 044 doing read group and others, but 0440 can't with any combination.
Click to expand...
Click to collapse
The 0 to the far left is Used to set setuid, setgid, or sticky bit, you may not see it in your file browser but 0440 or 440 is okay
As long as the permission looks like the photo your good.
Sent from my SM-N900T using Tapatalk 2
Going to add a link to this in the Sprint thread as well. Thanks again!
nolimit06 said:
Going to add a link to this in the Sprint thread as well. Thanks again!
Click to expand...
Click to collapse
Alright, you and anyone else are more than welcome to.
Sent from my SM-N900T using Tapatalk 2
lm that guy said:
1. First force stop Dead Trigger 2 App in Application settings
2. UNZIP and Just push the attached file to /data/data/com.madfingergames.deadtrigger2/shared_prefs/
3. Then change permission to 440
4. Done! Enjoy! :laugh:
You will experience a tad bit of frame drops at times but that's to be expected since the graphics were optimized for only Tegra 4. BUT, S800 handles it very well!
Works on any device, must be rooted
Click to expand...
Click to collapse
Do you see ultra high in settings? I see only low and high even after mod
Sent from my Nexus 7 using Tapatalk
gautampw said:
Do you see ultra high in settings? I see only low and high even after mod
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
That's just how it is but max graphics are enabled. Just make sure you don't touch those or you will have to reapply the mod.
Sent from my SM-N900T using Tapatalk 2
DEAD TRIGGER 2 Ultra High Graphics
Google "DEAD TRIGGER 2 [Ultra High Graphics] v0.02.1 APK" for Ultra High Graphics on any device
No root required!
I love
that a 3kb file was compressed into a 1kb zip!
I know this is a noob question but how do you change the permissions please?
Smash41 said:
I know this is a noob question but how do you change the permissions please?
Click to expand...
Click to collapse
Download Root explorer. inside root explorer tap on the file you want to change the permissions you will see list of options>>>> select permissions. then you will know what to do from there.
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
please how would my Motorola droid Razr XT912 handle this game on ultra high settings. I play dead trigger1 on ultra with mod. its plays at 30fps-40fps it can dip low to 19fps in a twinkle of an eye. and rerurns back to 30fps. overall gameplay is smooth but i want to know how dead trigger2 will perform. on my razr
infinitycane said:
Download Root explorer. inside root explorer tap on the file you want to change the permissions you will see list of options>>>> select permissions. then you will know what to do from there.
---------- Post added at 03:12 PM ---------- Previous post was at 03:01 PM ----------
please how would my Motorola droid Razr XT912 handle this game on ultra high settings. I play dead trigger1 on ultra with mod. its plays at 30fps-40fps it can dip low to 19fps in a twinkle of an eye. and rerurns back to 30fps. overall gameplay is smooth but i want to know how dead trigger2 will perform. on my razr
Click to expand...
Click to collapse
You might be in for a lag fest If your rooted you can try and revert back easily by changing the in app graphic settings.
Sent from my SM-N900T using Tapatalk 2
Cool nice thread lets see how my tegra 3 handles it
Thanks
Sent from my HTC One X using Tapatalk 2
works well on my nexus 4, thanks !
That made difference
Thanks
peteyboy24 said:
works well on my nexus 4, thanks !
Click to expand...
Click to collapse
where did you find the permission in the text?
[ <?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<int name="OptionsMute" value="1" />
<float name="OptionsReloadButtonY" value="0.0" />
<float name="OptionsMusicVolume" value="1.0" />
<float name="OptionsSensitivity" value="0.7" />
<float name="OptionsGadgetButtonX4" value="0.0" />
<int name="OptionsInvertYAxis" value="0" />
<float name="OptionsWeaponButtonX" value="0.0" />
<float name="OptionsWeaponButtonY" value="0.0" />
<float name="OptionsReloadButtonX" value="0.0" />
<int name="UnityGraphicsQuality" value="3" />
<float name="OptionsGadgetButtonX3" value="0.0" />
<float name="OptionsAimButtonX" value="0.0" />
<float name="OptionsGadgetButtonX2" value="0.0" />
<float name="OptionsGadgetButtonX1" value="0.0" />
<float name="OptionsGadgetButtonX0" value="0.0" />
<int name="OptionsLeftHandControlsNeedUpdate" value="0" />
<float name="OptionsMoveStickY" value="0.0" />
<float name="OptionsMeleeButtonY" value="0.0" />
<float name="OptionsMeleeButtonX" value="0.0" />
<string name="PUNCloudBestRegion">US</string>
<int name="OptionsLeftHandAiming" value="0" />
<int name="ShowBlood" value="1" />
<int name="FirstRun" value="2" />
<float name="OptionsMoveStickX" value="0.0" />
<float name="OptionsSoundVolume" value="1.0" />
<int name="OptionsControlScheme" value="0" />
<float name="OptionsAimButtonY" value="0.0" />
<int name="OptionsLanguage" value="1" />
<int name="OptionsSubtitles" value="1" />
<int name="Screenmanager Is Fullscreen mode" value="0" />
<float name="OptionsPauseButtonX" value="0.0" />
<int name="Screenmanager Resolution Width" value="1920" />
<float name="OptionsPauseButtonY" value="0.0" />
<int name="OptionsGraphicDetail" value="2" />
<int name="OptionsControlStyle" value="1" />
<float name="OptionsFireButtonX" value="0.0" />
<float name="OptionsFireButtonY" value="0.0" />
<int name="Screenmanager Resolution Height" value="1080" />
<float name="OptionsGadgetButtonY0" value="0.0" />
<int name="Intro" value="1" />
<float name="OptionsGadgetButtonY2" value="0.0" />
<float name="OptionsGadgetButtonY1" value="0.0" />
<float name="OptionsGadgetButtonY4" value="0.0" />
<float name="OptionsGadgetButtonY3" value="0.0" />
</map>]
that was all what i get! so tell me please where is it? or where i should put the value in?
Sent from my Nexus 4 using xda app-developers app
nexuses said:
where did you find the permission in the text?
that was all what i get! so tell me please where is it? or where i should put the value in?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
change this line:
Code:
<int name="OptionsGraphicDetail" value="2" />
to this:
Code:
<int name="OptionsGraphicDetail" value="[B][COLOR="Red"]3[/COLOR][/B]" />
nexuses said:
where did you find the permission in the text?
[ <?xml version='1.0' encoding='utf-8' standalone='yes' ?>
<map>
<int name="OptionsMute" value="1" />
<float name="OptionsReloadButtonY" value="0.0" />
<float name="OptionsMusicVolume" value="1.0" />
<float name="OptionsSensitivity" value="0.7" />
<float name="OptionsGadgetButtonX4" value="0.0" />
<int name="OptionsInvertYAxis" value="0" />
<float name="OptionsWeaponButtonX" value="0.0" />
<float name="OptionsWeaponButtonY" value="0.0" />
<float name="OptionsReloadButtonX" value="0.0" />
<int name="UnityGraphicsQuality" value="3" />
<float name="OptionsGadgetButtonX3" value="0.0" />
<float name="OptionsAimButtonX" value="0.0" />
<float name="OptionsGadgetButtonX2" value="0.0" />
<float name="OptionsGadgetButtonX1" value="0.0" />
<float name="OptionsGadgetButtonX0" value="0.0" />
<int name="OptionsLeftHandControlsNeedUpdate" value="0" />
<float name="OptionsMoveStickY" value="0.0" />
<float name="OptionsMeleeButtonY" value="0.0" />
<float name="OptionsMeleeButtonX" value="0.0" />
<string name="PUNCloudBestRegion">US</string>
<int name="OptionsLeftHandAiming" value="0" />
<int name="ShowBlood" value="1" />
<int name="FirstRun" value="2" />
<float name="OptionsMoveStickX" value="0.0" />
<float name="OptionsSoundVolume" value="1.0" />
<int name="OptionsControlScheme" value="0" />
<float name="OptionsAimButtonY" value="0.0" />
<int name="OptionsLanguage" value="1" />
<int name="OptionsSubtitles" value="1" />
<int name="Screenmanager Is Fullscreen mode" value="0" />
<float name="OptionsPauseButtonX" value="0.0" />
<int name="Screenmanager Resolution Width" value="1920" />
<float name="OptionsPauseButtonY" value="0.0" />
<int name="OptionsGraphicDetail" value="2" />
<int name="OptionsControlStyle" value="1" />
<float name="OptionsFireButtonX" value="0.0" />
<float name="OptionsFireButtonY" value="0.0" />
<int name="Screenmanager Resolution Height" value="1080" />
<float name="OptionsGadgetButtonY0" value="0.0" />
<int name="Intro" value="1" />
<float name="OptionsGadgetButtonY2" value="0.0" />
<float name="OptionsGadgetButtonY1" value="0.0" />
<float name="OptionsGadgetButtonY4" value="0.0" />
<float name="OptionsGadgetButtonY3" value="0.0" />
</map>]
that was all what i get! so tell me please where is it? or where i should put the value in?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
that's okay.. but this is the permissions which I saw.. and I don't know how to set them to that value!
Sent from my Nexus 4 using xda app-developers app
lm that guy said:
change this line:
Code:
<int name="OptionsGraphicDetail" value="2" />
to this:
Code:
<int name="OptionsGraphicDetail" value="[B][COLOR="Red"]3[/COLOR][/B]" />
Click to expand...
Click to collapse
I just tried it, there has been a observed improvement in the quality of graphics.. thanks
Sent from my Nexus 4 using xda app-developers app