Develop Bugs

Tilt 2 freezing when locking phone...

Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?

You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.

thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...

I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.

Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.

thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.

Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T

Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.

[Q] Primary shortcuts moved to side of screen

As the title says, somehow I moved the primary short cuts the ones at the bottom of the home screen to the side where they are stacked vertically. They are over lapping existing short cuts that can no longer be pressed without the primary being activated.
So the question is how did I do it, and how do I get it back to normal where they are at the bottom again?
I have looked around and I can not find any real answers so help would be appreciated.

Commcat said:
As the title says, somehow I moved the primary short cuts the ones at the bottom of the home screen to the side where they are stacked vertically. They are over lapping existing short cuts that can no longer be pressed without the primary being activated.
So the question is how did I do it, and how do I get it back to normal where they are at the bottom again?
I have looked around and I can not find any real answers so help would be appreciated.
Click to expand...
Click to collapse
You probably turned on one handed mode - adds home back and recents keys to the right side. Generally a toggle in the notification bar, or somewhere in the settings you will find it. I hit toggles all the time justpulling the phone out of my pocket...
Hope this helps.

panaderodc said:
You probably turned on one handed mode - adds home back and recents keys to the right side. Generally a toggle in the notification bar, or somewhere in the settings you will find it. I hit toggles all the time justpulling the phone out of my pocket...
Hope this helps.
Click to expand...
Click to collapse
No I am afraid that was not it as the ONLY thing that was changed was the location of those primary shortcuts. The rest of the phone and display worked normally. The one hand mode cause the keypad for dialing to shrink and shift to the desired side. When this happened the keypad was still normal.

When you say primary shortcuts, are you talking about the dock? Or home, back, recent keys? If the latter, there is a Side key panel setting in display settings - one handed operation which does that without shrinking anything. Posting a screen shot here may help us identify your issue

Commcat said:
No I am afraid that was not it as the ONLY thing that was changed was the location of those primary shortcuts. The rest of the phone and display worked normally. The one hand mode cause the keypad for dialing to shrink and shift to the desired side. When this happened the keypad was still normal.
Click to expand...
Click to collapse
I assumed you meant the menu back and home keys, on rereading perhaps you meant the dock. Did you figure it out yet?

panaderodc said:
I assumed you meant the menu back and home keys, on rereading perhaps you meant the dock. Did you figure it out yet?
Click to expand...
Click to collapse
Yes I meant the dock, and no I have not figured out how I did it. I am now thinking maybe my display just wigged out and it ended up that way. I was able to fix by enabling easy mode then turning it back to normal mode.

Problem with digitizer

Hello i've a problem with digitized, 1 CM from top of the screen didn't respond for any touch, im allready install OTA of nougat manually and make a factory reset, now I can't click to recover my contacts, and sort apps list in main menu from alphabetic order, and little more problem... In settings menu I can turn back my phone and that's solved problem cause screen is rotated, but not in contacts and main app menu, I tried to install some difrent launcher but still didn't rotate main menu and contacts, any solution anyone?

Rogeroo said:
Hello i've a problem with digitized, 1 CM from top of the screen didn't respond for any touch, im allready install OTA of nougat manually and make a factory reset, now I can't click to recover my contacts, and sort apps list in main menu from alphabetic order, and little more problem... In settings menu I can turn back my phone and that's solved problem cause screen is rotated, but not in contacts and main app menu, I tried to install some difrent launcher but still didn't rotate main menu and contacts, any solution anyone?
Click to expand...
Click to collapse
I had this same issue. I ended up with a warranty replacement because it is a hardware issue. The first replacement I got actually had the same issue, but it was even worse. It was the entire top inch and a half of the screen. The second replacement I got was good to go.

I think about that, but i've a little crack screen in the corner on top so im thinking they told me that is my fold, or im wrong and they change my screen ? I can see that not only my problem

Same issue, my previous phone was overheating in the top part of the phone which killed the digitizer at the end. You need a replacement phone
Sent from my HTC6545LVW using Tapatalk

Pull down menu is no longer working while in portrait

Hello has anyone experienced this?
Since last night (1/10/18) I have lost the ability to pull down the top menu using the screen.
I can still bring it up if I use the swiping function of the fingerprint reader though.
If i use the phone in landscape I am however able to pull down the top menu.
I tried rebooting several times, I also tried disabling/enabling the swipe gesture function, nothing helped so far.
Note: I do not use any launcher app.
Any idea as to what could cause that?

Just to update anyone stumbling on this post, the phone actually got worse...
The issue evolved into having the entire area of the touchscreen acting up.
Touch and swipes don't get recognized, and on the top of that the screen is tapping and swiping by itself.
Makes it really hard to use. I tried a factory reset but the issues remain.
The touchscreen digitizer probably failed...
Oh well I started an RMA with Google, should get a new phone with 5 days.
Cheers

Unresponsive screen bottom

Thid weird issue started today in the morning, first I noticed that the clock widget had changed size, and that the led me know ring around the cam hole was out of place, but, when trying to write in whatsapp, I no longer could make the keyboard to appear by taping the wrinting field, in fact, nothing located in the bottom worked, what is odd, the bottom gestures worked, as I hid the nav bar since day one, tried everything, changed dpi, changed keyboards, retired the screen protector, wiped cache, to no avail, reluctantly, I updated to android 10, but no luck, after digging more, I found a work around, I changed the resolution from quad hd to full hd, now all is normal, but, this is just a work around, not a real solution, somebody have an idea of what would be the reason for this?

Did you have your phone linked to windows, your computer online and the phone screen displayed at that time? In this case, if you chose to use your computer's hardware keyboard in Your phone settings on your computer, then, when trying to write something in whatsapp, the virtual keyboard on your phone is not displayed or it is partially displayed. In my case, using the AI Type keyboard, only the top row of the keyboard was displayed because the app thought I'm using my computer's keyboard.
Sent from my SM-N975F using Tapatalk

Thanks for your reply, but no, in fact I have never used the phone in that way, something else caused the issue

winol said:
Thanks for your reply, but no, in fact I have never used the phone in that way, something else caused the issue
Click to expand...
Click to collapse
Was your phone charging at the time by any chance?

I found the solution!
I had the exact same problem with my note 10 plus, the gestures worked, and I tested the bottom part of the screen to make sure everything was working and it was, but the buttons in apps like instagram at the very bottom of the screen still were unresponsive most of the time. The solution is to ho to your settings, switch the navigation bar to the other gesture variant and then back to you preffered one and it should work. It worked for me.

Thanks man, I just found what triggers the issue, as odd as it seems, changing resolutions from qhd to fhd id what causes the issue, odd, because I used a bixby routine to save power at nights, by setting medium power saving, which among other things, lowered the screen resolution to fhd, when the routine ended, it should reverse to qhd, and that precisely triggered the issue, I used this routine for months, until, out of the blue, it started to cause this problem