Develop Bugs

[PATCHER][APP] Dual Boot Patcher [OFFICIAL SNAPSHOT]

This tool/app will allow any number of ROMs to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (/system/multiboot, /cache/multiboot, and /data/multiboot). Because of the way this is implemented, no changes to the primary ROM are necessary
Donators
A huge thanks goes out to all of the donators for supporting this project! I if forgot to add you (and you want to be added), please send me a quick PM.
See all of our supporters here: https://gist.github.com/chenxiaolong/3f3fb485cbd0cb77c4281941433ec54d
It patches...
Custom kernels for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
NOTE: If you want to dualboot an EUI ROM, I highly recommend installing EUI as the primary ROM.
How to use the patcher
Android
Download the patcher apk and run it. Tap "Patch Zip File" from the navigation drawer and choose the file you want to patch.
Windows (GUI)
Double click DualBootPatcher.exe and choose the file you want to patch.
--------
After patching the zip file, a new file, like some_rom_dual.zip file will be created. For example, patching ktoonsez's
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013.zip
would create a new
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013_dual.zip
Instructions for dual booting
Before doing anything, download the Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
The patcher offers several locations for installing ROMs:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
With that said, let's get to the "how to"!
First, boot into your primary ROM and install the Dual Boot Patcher app
Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
Go to "Patch zip file" in the navigation drawer and patch the ROM or zip you want to install. You can select one of the installation locations described above.
There are two ways of flashing the patched zip file. You can either flash it normally from recovery or flash it using the in-app flashing feature. Both methods are explained below.
Flashing from recovery
To flash from recovery, just flash the patched zip file like you would for any other zip. Nice and simple.
In-app flashing
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.
A normal backup from recovery will backup every ROM. If you would like to back up ROMs individually, please see @rlorange's awesome tool: http://forum.xda-developers.com/showthread.php?t=2491299
How do I...?
Switch the ROM if something doesn't work properly?
You can flash the DualBootUtilities zip from recovery. It will provide a menu interface that allows switching to the various ROMs.
If you have TWRP, you can also switch manually by tapping Install -> Images (bottom right) -> Go to /sdcard/MultiBoot/[Your ROM]/ -> flash boot.img.​
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Alternatively, flash the DualBootUtilities zip from recovery, which will also allow you to wipe a ROM.
NOTE: Don't use the recovery's built-in wiping abilities as that may delete non-primary ROMs!​
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.​
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.​
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.​
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it ​
Downloads:
[LINK] Dual Boot Patcher (Snapshots) and DualBootUtilities recovery zip
Donations:
Donations are not required, but are greatly appreciated Donators will have their names listed in a nice big font on this post and will also be listed in the README file of the patcher.
Source code:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
Please note, any bugs regarding app itself can be created over at https://github.com/chenxiaolong/DualBootPatcher/issues
Any other device-specific stuff can be asked over here itself.
XDA:DevDB Information
Dual Boot Patcher, Tool/Utility for the LeEco Le 1S
Contributors
chenxiaolong, DroidThug, https://github.com/chenxiaolong/DualBootPatcher/graphs/contributors
Source Code: https://github.com/chenxiaolong/DualBootPatcher
Version Information
Status: Snapshot
Current Beta Version: 9.2.0.r25.g0638efb
Beta Release Date: 2017-04-11
Created 2017-04-11
Last Updated 2017-04-11

FAQ
What does this do:
It allows you to multiboot between ROMs
What does it require:
It requires an unlocked bootloader, and root access
I have problems regarding this app:
1. Post the MultiBoot.log from your internal storage
2. Describe the problems with details such as which ROM, Kernel etc, and which variant of device you own (e.g x501, x507 etc.)
Does it support VoLTE:
This is not related to the tool. Do not ask for it
Help! I hardbricked/softbricked my device:
Sure, just describe what you did exactly
___ MORE TO COME
Any builds from and after 9.2.0.r25.g0638efb dated Mon, 10 Apr 2017 timed 19:57:27 should be okay to use for Le 1S

Can you make video how to install and run this app

sumitgp said:
Can you make video how to install and run this app
Click to expand...
Click to collapse
There are some out in youtube. But they are kinda outdated. Maybe someone will make it in the near future

DroidThug said:
There are some out in youtube. But they are kinda outdated. Maybe someone will make it in the near future
Click to expand...
Click to collapse
Your welcome bro
And ur contribution marvelous
Just keep going we are with u
Love u bhai thanks

is it work on LETV Le 1s x507
thanks for app
Iam asking because I dont understand LeEco 1S Products
Because LeEco 1s is X509
LETV 1S is x507
Is it also works on LETV Le 1s x507? please

fire3k said:
thanks for app
Iam asking because I dont understand LeEco 1S Products
Because LeEco 1s is X509
LETV 1S is x507
Is it also works on LETV Le 1s x507? please
Click to expand...
Click to collapse
Yes it work on le 1s x507

sumitgp said:
Yes it work on le 1s x507
Click to expand...
Click to collapse
Thnaku very much
then I'll try

fire3k said:
Thnaku very much
then I'll try
Click to expand...
Click to collapse
Thanku Very Much
I installed DualBootPatcher in My Le1S x507
and installed anlogside EUI, LineageOS 14.1 and Resurrection Remix 5.8.2 .
and they both working fine and installed gapps in both ROMS.
But 1 problem: that I installed SuperSu in LineageOS 14.1 and its working fine but when I try to install Supersu in Resurrection Remix 5.8.2, it installed perfectly there is no errors but when I open SuperSu app in Resurrection Remix 5.8.2 , It said that su binaries not installed
then I try to install Magisk12 in Resurrection Remix 5.8.2 and it gives some error.Please Giveme some Suggetion how to install magisk
Note: before install magisk, I already Patched it for RR 5.8.2

fire3k said:
Thanku Very Much
I installed DualBootPatcher in My Le1S x507
and installed anlogside EUI, LineageOS 14.1 and Resurrection Remix 5.8.2 .
and they both working fine and installed gapps in both ROMS.
But 1 problem: that I installed SuperSu in LineageOS 14.1 and its working fine but when I try to install Supersu in Resurrection Remix 5.8.2, it installed perfectly there is no errors but when I open SuperSu app in Resurrection Remix 5.8.2 , It said that su binaries not installed
then I try to install Magisk12 in Resurrection Remix 5.8.2 and it gives some error.Please Giveme some Suggetion how to install magisk
Note: before install magisk, I already Patched it for RR 5.8.2
Click to expand...
Click to collapse
Bhai check devloper option if there is any setting for root
If this will not work then try to share apps (super su app)
If above mentioned methods not work then try isu (higher version) of super su u can found it on los site
Thanks and warm regards

sumitgp said:
Bhai check devloper option if there is any setting for root
If this will not work then try to share apps (super su app)
If above mentioned methods not work then try isu (higher version) of super su u can found it on los site
Thanks and warm regards
Click to expand...
Click to collapse
Thanks for sugestion
but there is no option in Setting or devoloper option in Resurrection Remix 5.8.2 . only setting available in Magisk manager but it displays message that there is no root in system. Also tried chainfire Supersu. installs SuperSu App and when I tried to open it displays that There is no root binaries. Please help.
root is functioning in Resurrection Remix 5.8.2, when I install ROM without Dual Boot Patcher. but Only installs One ROM at a time no multiboot. Please any suggestion?

Thanks For Dual Boot Patcher
Atlast Solved
First I Flashed Chainfire SuperSu, then reboot then check root , it failed, and then I reboot and flash Magisk 12 and reboot. This Time All Ok Root Succeded

thanks for the updates!

If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u

error
it shows error while booting 2nd rom

pravesh46 said:
it shows error while booting 2nd rom
Click to expand...
Click to collapse
What error? Be specific or give logs-,-

'have to try this! Thanks.
But, could this by any way interfer or get problem with F2FS formatted partitions (data,cache) ?

I'm also having some errors while installing the secondary rom...like extracting system errors

Hi! my Le1S gone in bootloop. Is there any solution to boot into the Primary ROM (i.e. eUI) via twrp? I have installed dual boot patcher & made eui as primary rom, lineage as secondary rom in "rrnougat" data slot & resurrection remix as secondary rom in " rrnougat2 " data slot.
From the past 2 weeks, I am using resurrection remix rom & sometimes eui. Today, I was on rr & my phone was hanging. So, I simply just restarted it & then, it gone in bootloop.
So, canI boot into my primary eui rom via twrp?, as dual boot patcher app cannot be accessed. Please help.

iamkamlesh said:
Hi! my Le1S gone in bootloop. Is there any solution to boot into the Primary ROM (i.e. eUI) via twrp? I have installed dual boot patcher & made eui as primary rom, lineage as secondary rom in "rrnougat" data slot & resurrection remix as secondary rom in " rrnougat2 " data slot.
From the past 2 weeks, I am using resurrection remix rom & sometimes eui. Today, I was on rr & my phone was hanging. So, I simply just restarted it & then, it gone in bootloop.
So, canI boot into my primary eui rom via twrp?, as dual boot patcher app cannot be accessed. Please help.
Click to expand...
Click to collapse
You can switch to other rom using dualbootutilities.zip. Just flash the zip . Then select ROM u want to switch & then select switch to..

[ROM][P905][UNOFFICIAL] Resurrection Remix 5.8.5 Android 7.1.2 20180118

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Links
2: 20180118: remove Magisk, back su: https://drive.google.com/file/d/11V0Hmu9Jjib-oLERLXPNXbMMAie_iORq/view?usp=sharing
1: 20171231: https://drive.google.com/file/d/1m7t_7gntp9cDRRxGnJJqnwufnJxFVKUZ/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 7.1
Recovery
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Sources
Sources: https://github.com/ResurrectionRemix/
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte

Thanks again a lot for your work.
I wish you a happy new year!

@Valera1978
What such amazing gift for New Year!!!
Thanks for such awesome work my friend!

What is the different from this FW in compare to
https://forum.xda-developers.com/ga...-cyanogenmod-14-0-android-7-0-nougat-t3476335
? Does this thread continous the "old" one or it is a total other FW (other feature, Kernel .... ) ?

Mad07 said:
What is the different from this FW in compare to
https://forum.xda-developers.com/ga...-cyanogenmod-14-0-android-7-0-nougat-t3476335
? Does this thread continous the "old" one or it is a total other FW (other feature, Kernel .... ) ?
Click to expand...
Click to collapse
Hardware and config the same.
The idea is create another thread for custom firmwares, based on lineage\aosp.
Right now it's RR only, i'm working on OMNI rom, and later i'll build more firmwares.

please in other version don't insert the magisk.the rom to go in loop .and add in developer option the root gestion

Dagoncore93 said:
please in other version don't insert the magisk.the rom to go in loop .and add in developer option the root gestion
Click to expand...
Click to collapse
I'm taking a stab at what you are trying to express but the roms take 10 to 15 minutes to boot the first time because you are doing a full wipe. If you are not giving it at least that long magisk is not a likely cause.

Loakidog said:
I'm taking a stab at what you are trying to express but the roms take 10 to 15 minutes to boot the first time because you are doing a full wipe. If you are not giving it at least that long magisk is not a likely cause.
Click to expand...
Click to collapse
I received myself the error system ui crashed, and it got stuck on it.

Thanks Valera 1978, what a great new year gift!

I'm actually running Android 5.0.2, so is that Lollipop
Sent from my SM-G935F using XDA-Developers Legacy app

Albinoni said:
I'm actually running Android 5.0.2, so is that Lollipop
Click to expand...
Click to collapse
Yes

ralph_kl said:
I received myself the error system ui crashed, and it got stuck on it.
Click to expand...
Click to collapse
Send Valera1978 a bug report via Private Message. It is the only way developers can isolate the problem and fix it. In most Roms you can take a bug report via developer options.

help please Valera1978
i am updating from Resurrection Remix 5.8.5 version 20171231.
i wiped cache partitions
flashing rom 20180118 stuck on patching system unconditionally

theogalaxy said:
help please Valera1978
i am updating from Resurrection Remix 5.8.5 version 20171231.
i wiped cache partitions
flashing rom 20180118 stuck on patching system unconditionally
Click to expand...
Click to collapse
Try a full wipe magisk was removed with the latest version and super su added

A little help, please
Hello,
Sorry, but I need an help for understand.
How I can install this system?
I mean, can you explain to me what steps I need to do to install and which files to download?
sorry for my english, which is why I did not understand how to do it
Rosario
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
I'm using nano gapps.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Links
2: 20180118: remove Magisk, back su: https://drive.google.com/file/d/11V0Hmu9Jjib-oLERLXPNXbMMAie_iORq/view?usp=sharing
1: 20171231: https://drive.google.com/file/d/1m7t_7gntp9cDRRxGnJJqnwufnJxFVKUZ/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 7.1
Recovery
Official TWRP: http://forum.xda-developers.com/showthread.php?t=2706982
Sources
Sources: https://github.com/ResurrectionRemix/
Device: https://github.com/Valera1978/android_device_samsung_viennalte
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Vendor: https://github.com/Valera1978/android_vendor_samsung_viennalte
Click to expand...
Click to collapse

Compability
It is can flash for SM-P091 ?

i want the S Pen features and UI of Galaxy Tab S3 on my Galaxy Note 12.1 Pro Wifi. Am I right here and if yes how to do it please?
In terms of the little RAM I have I will use on microSD card as a RAM alternativ. is this a good idea in combination with a custom Rom?
Thx!

Kangvip Rom [EMUI 8.0] Honor 9 Lite

Hi friends
today i want to introduce the best and bugless Emui based rom
you may have heard this group name:
Kangvip
today i want to share this great rom with you
Features:
Pre rooted by Supersu
Huawei Launcher Rotation
Easily share none system apps by dragging
Gloves mode enabled
Support all Gapps except play store
AND some of K settings features:
Call strobe
Automatic Call answering
Change battery style
Change clock place
Customizing status bar
Customizing Navigation bar
Customizing Huawei Launcher
Tune gpu and cpu for game,power save etc.
Changing dpi
Showing intered passwords of wifi
Global immersion mode
Great reboot menu like reboot to recovery,bootloader etc.
Block ads feature
and so on........
Requirements:
Unlocked bootloader
and also a honor 9 lite absolutly
Instruction:
1. Download the Rom from next post
2. Extract the zip and go to fastboot.
3. you will see system.img and ramdisk.img flash them by fastboot one by one.
Code:
Code:
fastboot flash system system.img
Code:
fastboot flash ramdisk ramdisk.img
4. now reboot system.
Enjoy now you have installed one of the best Custom Roms.
pay attention:
as you know there is no bugless twrp for this phone and if you wipe data with that your phone may not boot.
so just by stock recovery do a factory reset till this roms works very well.
if you don't have stock recovery download from next post.
you may see few chinese apps you can uninstall them by lucky patcher or flash the zip that i send by twrp
Please don't forget to hit thanks button:fingers-crossed:
XDA:DevDB Information
Kangvip Rom, ROM for the Honor 9 Lite
Contributors
honorfan, honorfan
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: boot loader unlocked,twrp installed
Based On: kangvip
Version Information
Status: Stable
Created 2018-04-10
Last Updated 2018-04-10

The Rom:
https://mega.nz/#!QHZAHBbA!V4MaeY5BXMCQo3wOXVcRNcr8qckKsGRanqEdAG-Z41M
Stock recovery:
https://mega.nz/#!AWpREQzQ!FlSZ-BAWAqsyJgkJpT45b-ecN1LcJ4TTzMXF2Vaw0kY
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
Twrp for oreo:
https://mega.nz/#!NToSgADK!oW4NA1dgGcpRMtJ9wVvdfE6JZE6gO0SofDW1vVVs7_0
fastboot flash recovery_ramdisk oreo_twrp.img
Flashable zip for removing bloatwares:
https://mega.nz/#!1DIECBpZ!_a1HPmz1EmKmCXWvUTwuJKE_sxHInWKCUppGmVYP_8k
Magisk:
https://forum.xda-developers.com/attachment.php?attachmentid=4450387&d=1521348853
1.*Face Unlock magisk module
https://mega.nz/#!MSQS1BxY!fJvieuQWjbAauylqCvngHoM3wLPChTTCgPdO0yy0UC8
2. AR LENS
https://mega.nz/#!9WIQEAKB!gwuOEniF9J88KmhEDScEuD8_ZWcbqe7mXWhlPMJiyQ0
Do not forget to hit thanks button

Screenshots
here is some of screenshots

honorfan said:
The Rom:
https://mega.nz/#!QHZAHBbA!V4MaeY5BXMCQo3wOXVcRNcr8qckKsGRanqEdAG-Z41M
Stock recovery:
https://mega.nz/#!AWpREQzQ!FlSZ-BAWAqsyJgkJpT45b-ecN1LcJ4TTzMXF2Vaw0kY
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
Twrp for oreo:
https://mega.nz/#!NToSgADK!oW4NA1dgGcpRMtJ9wVvdfE6JZE6gO0SofDW1vVVs7_0
fastboot flash recovery_ramdisk oreo_twrp.img
Flashable zip for removing bloatwares:
https://mega.nz/#!1aggQbYA!fID_qltftrIfD3qUCE5Qgj7XBfVQrYLSIy6WebiiomE
Magisk:
https://forum.xda-developers.com/attachment.php?attachmentid=4450387&d=1521348853
Do not forget to hit thanks button
Click to expand...
Click to collapse
Links updated
Magisk added
You can flash it by twrp and install magisk manager
Of you hate supersu

honorfan said:
The Rom:
https://mega.nz/#!QHZAHBbA!V4MaeY5BXMCQo3wOXVcRNcr8qckKsGRanqEdAG-Z41M
Stock recovery:
https://mega.nz/#!AWpREQzQ!FlSZ-BAWAqsyJgkJpT45b-ecN1LcJ4TTzMXF2Vaw0kY
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
Twrp for oreo:
https://mega.nz/#!NToSgADK!oW4NA1dgGcpRMtJ9wVvdfE6JZE6gO0SofDW1vVVs7_0
fastboot flash recovery_ramdisk oreo_twrp.img
Flashable zip for removing bloatwares:
https://mega.nz/#!1aggQbYA!fID_qltftrIfD3qUCE5Qgj7XBfVQrYLSIy6WebiiomE
Magisk:
https://forum.xda-developers.com/attachment.php?attachmentid=4450387&d=1521348853
1.*Face Unlock magisk module
https://mega.nz/#!MSQS1BxY!fJvieuQWjbAauylqCvngHoM3wLPChTTCgPdO0yy0UC8
2. AR LENS
https://mega.nz/#!9WIQEAKB!gwuOEniF9J88KmhEDScEuD8_ZWcbqe7mXWhlPMJiyQ0
Do not forget to hit thanks button
Click to expand...
Click to collapse
Links updated:
Face unlock and Ar lens magisk modules added
You can flash them by magisk if you like them

honorfan said:
Links updated:
Face unlock and Ar lens magisk modules added
You can flash them by magisk if you like them
Click to expand...
Click to collapse
Hello!
Can i use it on chinese lld-al10?
Thank you.

tiborsoos said:
Hello!
Can i use it on chinese lld-al10?
Thank you.
Click to expand...
Click to collapse
Hi yes you can

asdasd
honorfan said:
Hi friends
today i want to introduce the best and bugless Emui based rom
you may have heard this group name:
Kangvip
today i want to share this great rom with you
Features:
Pre rooted by Supersu
Huawei Launcher Rotation
Easily share none system apps by dragging
Gloves mode enabled
Support all Gapps except play store
AND some of K settings features:
Call strobe
Automatic Call answering
Change battery style
Change clock place
Customizing status bar
Customizing Navigation bar
Customizing Huawei Launcher
Tune gpu and cpu for game,power save etc.
Changing dpi
Showing intered passwords of wifi
Global immersion mode
Great reboot menu like reboot to recovery,bootloader etc.
Block ads feature
and so on........
Requirements:
Unlocked bootloader
and also a honor 9 lite absolutly
Instruction:
1. Download the Rom from next post
2. Extract the zip and go to fastboot.
3. you will see system.img and ramdisk.img flash them by fastboot one by one.
Code:
Code:
fastboot flash system system.img
Code:
fastboot flash ramdisk ramdisk.img
4. now reboot system.
Enjoy now you have installed one of the best Custom Roms.
pay attention:
as you know there is no bugless twrp for this phone and if you wipe data with that your phone may not boot.
so just by stock recovery do a factory reset till this roms works very well.
if you don't have stock recovery download from next post.
you may see few chinese apps you can uninstall them by lucky patcher or flash the zip that i send by twrp
Please don't forget to hit thanks button:fingers-crossed:
XDA:DevDB Information
Kangvip Rom, ROM for the Honor 9 Lite
Contributors
honorfan, honorfan
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: boot loader unlocked,twrp installed
Based On: kangvip
Version Information
Status: Stable
Created 2018-04-10
Last Updated 2018-04-10
Click to expand...
Click to collapse
good job man! but what about sound quality in headphones on this rom? is it better than stock?

TwITe said:
Hi friends
today i want to introduce the best and bugless Emui based rom
you may have heard this group name:
Kangvip
today i want to share this great rom with you
Features:
Pre rooted by Supersu
Huawei Launcher Rotation
Easily share none system apps by dragging
Gloves mode enabled
Support all Gapps except play store
AND some of K settings features:
Call strobe
Automatic Call answering
Change battery style
Change clock place
Customizing status bar
Customizing Navigation bar
Customizing Huawei Launcher
Tune gpu and cpu for game,power save etc.
Changing dpi
Showing intered passwords of wifi
Global immersion mode
Great reboot menu like reboot to recovery,bootloader etc.
Block ads feature
and so on........
Requirements:
Unlocked bootloader
and also a honor 9 lite absolutly
Instruction:
1. Download the Rom from next post
2. Extract the zip and go to fastboot.
3. you will see system.img and ramdisk.img flash them by fastboot one by one.
Code:
good job man! but what about sound quality in headphones on this rom? is it better than stock?
Click to expand...
Click to collapse
Hi this is like stock rom

honorfan said:
Hi friends
today i want to introduce the best and bugless Emui based rom
you may have heard this group name:
Kangvip
today i want to share this great rom with you
Features:
Pre rooted by Supersu
Huawei Launcher Rotation
Easily share none system apps by dragging
Gloves mode enabled
Support all Gapps except play store
AND some of K settings features:
Call strobe
Automatic Call answering
Change battery style
Change clock place
Customizing status bar
Customizing Navigation bar
Customizing Huawei Launcher
Tune gpu and cpu for game,power save etc.
Changing dpi
Showing intered passwords of wifi
Global immersion mode
Great reboot menu like reboot to recovery,bootloader etc.
Block ads feature
and so on........
Requirements:
Unlocked bootloader
and also a honor 9 lite absolutly
Instruction:
1. Download the Rom from next post
2. Extract the zip and go to fastboot.
3. you will see system.img and ramdisk.img flash them by fastboot one by one.
Code:
Code:
fastboot flash system system.img
Code:
fastboot flash ramdisk ramdisk.img
4. now reboot system.
Enjoy now you have installed one of the best Custom Roms.
pay attention:
as you know there is no bugless twrp for this phone and if you wipe data with that your phone may not boot.
so just by stock recovery do a factory reset till this roms works very well.
if you don't have stock recovery download from next post.
you may see few chinese apps you can uninstall them by lucky patcher or flash the zip that i send by twrp
Please don't forget to hit thanks button:fingers-crossed:
XDA:DevDB Information
Kangvip Rom, ROM for the Honor 9 Lite
Contributors
honorfan, honorfan
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: boot loader unlocked,twrp installed
Based On: kangvip
Version Information
Status: Stable
Created 2018-04-10
Last Updated 2018-04-10
Click to expand...
Click to collapse
How can i install working Play Store?:fingers-crossed:

OmaroOmaro said:
Hi friends
today i want to introduce the best and bugless Emui based rom
you may have heard this group name:
Kangvip
today i want to share this great rom with you
Features:
Pre rooted by Supersu
Huawei Launcher Rotation
Easily share none system apps by dragging
Gloves mode enabled
Support all Gapps except play store
AND some of K settings features:
Call strobe
Automatic Call answering
Change battery style
Change clock place
Customizing status bar
Customizing Navigation bar
Customizing Huawei Launcher
Tune gpu and cpu for game,power save etc.
Changing dpi
Showing intered passwords of wifi
Global immersion mode
Great reboot menu like reboot to recovery,bootloader etc.
Block ads feature
and so on........
Requirements:
Unlocked bootloader
and also a honor 9 lite absolutly
Instruction:
1. Download the Rom from next post
2. Extract the zip and go to fastboot.
3. you will see system.img and ramdisk.img flash them by fastboot one by one.
Code:
How can i install working Play Store?:fingers-crossed:
Click to expand...
Click to collapse
Unfortunately this rom doesn't support play store
You can download apps from google.com
May be this problem will be fixed in next version

can someone post this rom on any Android File host website.. I am unable to download bcoz of limited exceed problem.

can't flash via fastboot
how to fix error flash via fastboot? when flashing system.img?
this is the error :
C:\platform-tools>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' 1/7 (460796 KB)...
OKAY [ 13.655s]
writing 'system' 1/7...
FAILED (remote: sparse flash write failure)
finished. total time: 13.801s
Click to expand...
Click to collapse
Or have to flash it via twrp?
---------- Post added at 05:41 ---------- Previous post was at 05:03 ----------
when flashing via twrp I given an error like this:
simg2img '/sdcard/system.img' '/dev/block/mmcblk0p51' process ended with ERROR: 255
How to fix this?
because when I'm using fastboot flash system system.img it's ended error like I given in above

@honorfan
How to fix shown above?
Any MD5 File? for Rom.zip?

[FYI]
Hello I Tried This KangVIP Rom and OpenKirin ROM,
The system.img in KangVIP Rom was broken
and
The system.img in OpenKirin ROM Worked...
So I think it's because the your Hosting in Mega.nz
Thanks..

gumelaragum said:
[FYI]
Hello I Tried This KangVIP Rom and OpenKirin ROM,
The system.img in KangVIP Rom was broken
and
The system.img in OpenKirin ROM Worked...
So I think it's because the your Hosting in Mega.nz
Thanks..
Click to expand...
Click to collapse
Hi i will check it and fix

honorfan said:
Hi i will check it and fix
Click to expand...
Click to collapse
Upload to AFH or Google Drive...

I downloaded, flashed & booted KangVIP rom using the file from this web hosting site itself, perhaps there were some pause & resumes or network interruptions in your case which led to a broken file download.
gumelaragum said:
[FYI]
Hello I Tried This KangVIP Rom and OpenKirin ROM,
The system.img in KangVIP Rom was broken
and
The system.img in OpenKirin ROM Worked...
So I think it's because the your Hosting in Mega.nz
Thanks..
Click to expand...
Click to collapse
---------- Post added at 05:48 PM ---------- Previous post was at 05:45 PM ----------
honorfan said:
Unfortunately this rom doesn't support play store
You can download apps from google.com
May be this problem will be fixed in next version
Click to expand...
Click to collapse
Since I flashed this file without wiping anything so it seems like playstore is working for me although facelock & theme manager doesn't work.

tiborsoos said:
Hello!
Can i use it on chinese lld-al10?
Thank you.
Click to expand...
Click to collapse
And can i use this rom to my rne l22 (mate 10 lite) bro?

Jackz1922 said:
And can i use this rom to my rne l22 (mate 10 lite) bro?
Click to expand...
Click to collapse
just if you have updated to oreo
yes
if you are still on nougat no

Android Pie Vince PR1 25/Ago/2018 Easy flash!!!

Android Pie semi-GSI
NEW METHOD TO INSTALL ANDROID PIE GSI ON YOUR VINCE
Choose one method, see the one that makes you more comfortable:
Any fix needed see 2nd and 3rd post before ask!
rawrower said:
This includes:
newest firmware, the new vendor image, Dark Ages kernel (+Darkness Control), the original GSI system image, and all fixes.
How to (testing):
Format system, vendor, cache, data, then flash Full4
Link V4:
https://drive.google.com/file/d/1o5op_3E7dT99OQ5qWMcrKIpw5tqYESU1/view
List of things that are broken:
- No encryption
- SIM card settings are still reset every reboot (it works fine, it's just annoying)
- Message about the system being damaged still appears every reboot (it's not actually damaged)
- USB connection type can only be changed in developer options in the settings, not in the notification
- Data Transfer Tool can crash during Pixel Setup, but you can go to app list, show system apps, and disable it in order to continue with the setup process.
Click to expand...
Click to collapse
Instructions for Vince:
Requirements :
Unlocked device:
https://forum.xda-developers.com/redmi-note-5/how-to/how-to-how-to-unlock-redmi-5-plus-t3750250
8.1 vendor base rom:
https://forum.xda-developers.com/redmi-note-5/development/rom-cardinalaosp-t3774232
Vendor only (unzip and flash img in vendor partition):
https://drive.google.com/file/d/1KHtB2JZZseimOUwmmZ-preQwA6L-v6R7/view
Orange fox recovery:
https://androidfilehost.com/?fid=5862345805528044525
NEW BUILD PPR1 + POST ZIPS
Gsi PPR1 A-only extract before flash, don't use de a/b gsi
https://androidfilehost.com/?w=files&flid=280192
New builds will appear here:
t.me/PsemiGSI
¡USE ONLY TREBLE VERSION OF KERNEL!
Dark Ages kernel:
https://forum.xda-developers.com/redmi-note-5/development/kernel-dark-ages-primero-t3809803
LH kernel:
https://forum.xda-developers.com/re...ernel8-1-0-lh-kernel-official-builds-t3806512
Universe by @ManoloRey:
https://drive.google.com/file/d/1EbPrwy3aTaIkQh9hWDPlRXR48F7mnE1B/view
Zucc Karnul:
https://forum.xda-developers.com/redmi-note-5/development/zucc-karnul-partial-eas-t3828199
Genom kernel:
t.me/genom_kernel_ch
OLD INSTALL METHOD:
How to flash:
boot to recovery
clean wipe (system, data, cache, dalvik, vendor, boot)
flash:
base rom
updated firmware (optional)
boot to android
enable usb debug
boot to recovery
wipe cache, dalvik and data
flash:
sgsi image to system partition
vendor image to vendor partition (optional, may break VoLTE)
treble kernel (optional, but advised)
reboot to recovery
mount vendor
post sgsi zips
reboot to Recovery
mount vendor partition
flash:
magisk Beta (optional)
lagfix
camer2api
gcamfix
fingerprintpfix (only if you got goodix fingerprint)
voltefix (optional)
dt2w (optional)
boot to android
Install:
GSM
GCam
Wellbeing (optional)
Easteregg (optional)
Rounded recents (optional, magisk module)
reboot
Bugs:
none if you use the fixes in second post
ROM OS Version: 9.0 Pie sGSI
Version Information Status: Testing Stable
Original general thread:
https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659

FIX'S (use only if needed):
PPR1 lagfix:
https://mega.nz/#!xVFj2I6I!1KjHKXK9lOSbdKXTfC0E0rLElYZPObQIaOsvPcVSG48
ADB fix:
https://github.com/AdrianDC/bootimage_adb_patcher/blob/master/release/bootimage_adb_unsecure.zip
Gcam:
https://drive.google.com/file/d/18LsjebFx7QdHr8tyiqDk32dK_e-lCDkw/view
Gcam Settings:
https://drive.google.com/file/d/1YNxEuldCgIQzxOqp8_4Mwd--rf2uSy_1/view
Gcam api2:
https://forum.xda-developers.com/attachment.php?attachmentid=4431945&d=1519687895
Gallery:
https://drive.google.com/file/d/1I642K2_rqpgttoTwLzXVIft4qC8oL2W0/view
Playstore/setup (gsm fix):
https://www.apkmirror.com/apk/googl...2-8-74-100400-204998136-android-apk-download/
Launcher mods:
https://drive.google.com/file/d/16QfQRcjVBzf6lHWlf06QvYoKYpKe2Y5q/view
VoLTE fix PPR1 (Volte works, flash on first boot):
https://mega.nz/#!AYsxQDCT!MdKWvyexdKqDiGCnHGxPOq1ZGjZADI-uTXN6Bn0pWoo
Wifi/Bluetooth fix by @abhishek987:
https://mega.nz/#!9QFmlQhL!bIvU3oRLFSt9GGR-KFZ1ftVmGnzfcwwOZBcPIbJhdKY
NEXT FIXES MAY BREAK YOUR ROM, USE AT YOUR OWN RISK!!!
Goodix fingerprint fix ( thank you @laststandrighthere)
https://mega.nz/#!td1B2CAZ!fGgnZHFIKaDzbba1jrsh2MaXuAmMU3FBd8IrcXQj1oY
Volte fix v3 (testing)
https://mega.nz/#!wZ9yGSbZ!Ah_-VaZOjdOgUvq1e0ZiFSFsrktUGLYMtAp6TpT-1Sg
Double touch to wake (Thank you @Pyrus01)
https://mega.nz/#!ZY8wVC7T!pWH7Nutr11n73MoB5AgYqOsw9GSfZoTSEZet8Q6-Ocg
Bootanimation fix:
https://mega.nz/#!0dc0zKLJ!4mpJ1AoXiUw-w4Fg9mcBqciWKI04USPOSh4qPyrPFtk

EXTRAS:
Root:
Magisk 16.7 BETA and up SHOULD be working:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Magisk Pie (use only if beta don't work for you):
https://mega.nz/#!sANxDSSC!3cY4GnSAR4WovxOI3JkQ2N2pnqBpIXgvI23ZO_eq-U4
Substratum for P:
http://telegra.ph/Substratum-07-27
Firmware Oreo 8.1(advised,may fix some problems):
https://forum.xda-developers.com/re.../firmware-xiaomi-redmi-note-5-5-plus-t3759683
Android Pie Easter egg:
https://mega.nz/#!8VVWVYAR!3lacmD8aMM7NP7Okz8wbI5aeZwWG5iAda5T3k6myopY
Android Pie Wellbeing:
Apk:
https://mega.nz/#!5Vcm2SiK!qVfDTVzo_RI7hp0OUcVO3B0LeKBaQGP6vcVp9un9bxQ
Zip:
https://mega.nz/#!9EFSTCzQ!kQoODxg0OkUMeMBGUTIljGASryu0ltTVisqWl-8iRUU
Rounded recents (magisk module):
https://mega.nz/#!AR90WYxK!EOtqFDu3xCr2HWQrGWNdkzN5sQNbCap-fMJJi9Qu_fs

Screenshot please

ecrudragon said:
Screenshot please
Click to expand...
Click to collapse
here some screenshots

TioCareca said:
here some screenshots
Click to expand...
Click to collapse
Thanks for the SS, i don't think much is changed, isn't it? anyway is it stable enough to use or is experimental only as you said in OP?

ecrudragon said:
Thanks for the SS, i don't think much is changed, isn't it? anyway is it stable enough to use or is experimental only as you said in OP?
Click to expand...
Click to collapse
Almost the same as dp4, front camera in WhatsApp is fixed, fingerprint is working for me...
its experimental, but good enough for using, still can appear some not identified bugs, well it's better to try it for yourself...

TioCareca said:
Almost the same as dp4, front camera in WhatsApp is fixed, fingerprint is working for me...
its experimental, but good enough for using, still can appear some not identified bugs, well it's better to try it for yourself...
Click to expand...
Click to collapse
I will try it tomorrow as its my off and get back to you :good:

TioCareca said:
Root:
Magisk 16.7 BETA SHOULD be working
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Custom kernel:
Flash your desired custom kernel (treble support)
Flash POST-sGSI_3.zip
Reboot
Vendor only:
https://drive.google.com/file/d/1KHtB2JZZseimOUwmmZ-preQwA6L-v6R7/view
Click to expand...
Click to collapse
Should i flash this vendor or flash cardinal AOSP?

BhagyeshGamer said:
Should i flash this vendor or flash cardinal AOSP?
Click to expand...
Click to collapse
your call, i flashed cardinal and it worked...

Thank you for your contribution.
Double tap work?

TioCareca said:
your call, i flashed cardinal and it worked...
Click to expand...
Click to collapse
mine is booting into fastboot.

BhagyeshGamer said:
mine is booting into fastboot.
Click to expand...
Click to collapse
did you follow the instructions correctly?

I think I need Video Tutorial to Flash?

renslorens said:
I think I need Video Tutorial to Flash?
Click to expand...
Click to collapse
:laugh:
boot into recovery
wipe everything except microsd
flash cardinal rom
boot and enable usb debug
boot into recovery
wipe cache, dalvik and data
flash gsi into system
mount vendor
flash post zips 1,2 and 3
flash lagfix
reboot

TioCareca said:
:laugh:
boot into recovery
wipe everything except microsd
flash cardinal rom
boot and enable usb debug
boot into recovery
wipe cache, dalvik and data
flash gsi into system
mount vendor
flash post zips 1,2 and 3
flash lagfix
reboot
Click to expand...
Click to collapse
going to follow this now. what is with dotos 2.4 vendor only img? flashing that is taking me to fastboot

BhagyeshGamer said:
going to follow this now. what is with dotos 2.4 vendor only img? flashing that is taking me to fastboot
Click to expand...
Click to collapse
never tested that, maybe i will take it off...

TioCareca said:
:laugh:
boot into recovery
wipe everything except microsd
flash cardinal rom
boot and enable usb debug
boot into recovery
wipe cache, dalvik and data
flash gsi into system
mount vendor
flash post zips 1,2 and 3
flash lagfix
reboot
Click to expand...
Click to collapse
Successfully booted!
---------- Post added at 09:02 PM ---------- Previous post was at 08:54 PM ----------
VOLTE is not working but i am recieving SMS. Secondly i am not getting any call ui, i just see the number and nothing else. no audio nothing. i am talking about standard phone call.

BhagyeshGamer said:
Successfully booted!
Click to expand...
Click to collapse
great ???

BhagyeshGamer said:
VOLTE is not working but i am recieving SMS. Secondly i am not getting any call ui, i just see the number and nothing else. no audio nothing. i am talking about standard phone call.
Click to expand...
Click to collapse
Strange, call ui is working in mine...

GSIs fixed builds for hi6250 (emui8)

Havoc 3.0 Q gsi fixed build for Huawei P10 Lite
About
Originally Havoc 3.0 Q gsi based on v204 compiled by ExpressLuke , but for Hi6250 some bugs persist , so I managed to fix them and repacked the IMG then highly compressed.
Fixed
* Camera * media ( sound , video , YouTube ..) * NFC * battery usage * auto brightness * phone Info's ( build number , model , manufacturer , device name .. ) * added Havoc bootanimation .
Bugs
* Offline charging ( requires permissive kernel , Labyrinth kernel 2.0 by Dil3mm4 tested * Blurry can be fixed in phh treble settings > Huawei features > 3rd option ( disabling hwcomposer ).
Installation
* Extract img from xz archive * go to TWRP and do a full wipe (system, data, cache, dalvik/art cache) * flash the image in system image partition * flash root (optional) NOTE1: If you are coming from Android 9 flashing root is a MUST DO ! NOTE2: Flash only the Magisk zip linked in this post ! * reboot to System * reboot to TWRP * flash gapps (optional) * Enjoy !!!
Download
https://mega.nz/#!2S4xxQ6C!f0KJlCA_9_yyJzWZAtlNYVJHktSuyyFY7p82kXK4caM
Twrp recommended ( by @Pretoriano80 ):
https://mega.nz/#!LLhBXSzY!3runNNoW9z1tOHSu-heIUhyy-4u8XHvc8rZMsn547so
Magisk.phh:
https://mega.nz/#!uX4k1KjS!2gnUV3IyLt8XXf4NO3RyZEJnt5YNJQ8tY9i11oGfKYM
Credits: @phhusson ExpressLuke @haky 86 @DarkJoker360 @Dil3mm4
Regards!
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x,bootloader unlocked and TWRP
Based On: AOSP
Version Information
Status: Stable
Created 2019-12-01

6 hrs SoT

Hami_Do said:
6 hrs SoT
Click to expand...
Click to collapse
Wow that's really impressive for a 3000 mAh device! Many people aren't getting that on the Note 10 Plus!

Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?

TureX said:
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
Click to expand...
Click to collapse
No, it's simply Havoc GSI with several fixes included especially for our device/platform and no, gapps are not included (you would have known if you read the first post more carefully )

TureX said:
Hi! Thats nice, so basically Is a Kirin gsi? Are gapps included?
Click to expand...
Click to collapse
For gapps , pico worked for me as it should , from here :
https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/

Hami_Do said:
For gapps , pico worked for me as it should , from here :
https://sourceforge.net/projects/opengapps/files/arm64/beta/20191114/
Click to expand...
Click to collapse
Hi! I Guess for Who hasn't a working twrp Is not possible to flash gapps. Thanks for your work and sorry for my english

TureX said:
Hi! I Guess for Who hasn't a working twrp Is not possible to flash gapps. Thanks for your work and sorry for my english
Click to expand...
Click to collapse
the suggested twrp in first post works perfectly on most hi6250 ( emui 8 ) , plus it has an option ( exclude OEM path from data wipe ) from there you don't need to format data & internal storage to boot any gsi/dssi AFAIK.
Only sometimes installing gapps requires resize system from advanced wipe menu.

thanks.. any build for havoc 2.9 ?

How can I remove the bottom pad that appears when I want to use the keyboard?

itsm03 said:
thanks.. any build for havoc 2.9 ?
Click to expand...
Click to collapse
the best 2.9 build here:
https://sourceforge.net/projects/ha...90912-phhgsi_arm64_a-Official.img.xz/download
1- wipe system data cache
2-flash havoc 2.9 and boot up to system
3- reboot to twrp and :
4- flash offline charger fix for pie
5- flash nfc patch for pie
6- flash hwcomposer ( follow instructions )
7- flash gapps and magisk ( optional )
Enjoy.
All flashable patches you find them here:
https://forum.xda-developers.com/p10-lite/how-to/gsis-manual-fixes-hi6250-devices-t3936745
ghassan haddad said:
How can I remove the bottom pad that appears when I want to use the keyboard?
Click to expand...
Click to collapse
Join https://t.me/hi6250group telegram group , there you can share your screenshots to understand the issue.

Hami_Do said:
Join https://t.me/hi6250group telegram group , there you can share your screenshots to understand the issue.
Click to expand...
Click to collapse
I Couldn't post pictures since new members need to wait, add to that I got only one answer telling me that it may not be possible.
I was referring to this pad in the picture

Now Gsi's based on v207 and later are stable , here you find latest Havoc Q gsi :
https://sourceforge.net/projects/expressluke-gsis/files/HavocOS/Ten/ARM64/A/
Probably only NFC patch is needed :
https://forum.xda-developers.com/p10-lite/how-to/gsis-manual-fixes-hi6250-devices-t3936745/page3
=========

No way to boot on my phone (WAS-LX1A)...stuck on boot, after some minutes its reboot, other minutes and then goes in erecovery.
I tried also a totally clean install starting with last firmware stock (WAS-LX1AC432B390) install (dload method) and then flashing Havoc 3.0 (based on v207) system file from fastboot.
Nothing to do and I came back beaten to Android 8.0
.....any help pls?
or maybe it is easier to buy a P30 lite
Tx
Toti

Achieve is currupt :-/

i get Error while flashing image, here is the log

Erro 255
I get error while flashing image here is the log

I have the saame problem on WAS-LX1
anvetoti said:
No way to boot on my phone (WAS-LX1A)...stuck on boot, after some minutes its reboot, other minutes and then goes in erecovery.
I tried also a totally clean install starting with last firmware stock (WAS-LX1AC432B390) install (dload method) and then flashing Havoc 3.0 (based on v207) system file from fastboot.
Nothing to do and I came back beaten to Android 8.0
.....any help pls?
or maybe it is easier to buy a P30 lite
Tx
Toti
Click to expand...
Click to collapse
Any help?
Help this guy and me, please!

From my experience with flashing this device it is most likely that either your device is still encrypted or there are magisk leftovers or data partition wasn't wiped correctly, that's causing rom not to boot. And always use pretoriano's twrp_0.5_test, works best. Sometimes it boots to erecovery, but you can try to reboot and it might work then.

NeoPreacher said:
From my experience with flashing this device it is most likely that either your device is still encrypted or there are magisk leftovers or data partition wasn't wiped correctly, that's causing rom not to boot. And always use pretoriano's twrp_0.5_test, works best. Sometimes it boots to erecovery, but you can try to reboot and it might work then.
Click to expand...
Click to collapse
I think you're right, I also think it's due to encryption or data partition (not magisk because I made a clean installation), because I had the same problem, stuck on boot, with all the Roms (PIE and Q) that require TWRP.
The only rom without problems was OpenKirin-OmniROM Pie Alpha 6.2 which does not require a custom recovery for installation !!
Do you have any operational suggestions to give me or I just have to try with pretoriano's twrp_0.5_test ??
What do you think if :
- In a stock recovery I do a factory reset
- From fastboot I do fastboot erase system, userdata and cache (or better to use format command for userdata?)
- the I flash system.img
- then I flash TWRP
- and then install magisk and gapps from TWRP?
TX