I've been very happy with the case on my Nexus 6P (this looks like the one: https://www.ebay.com/i/131886281154?rt=nc&var=431231132500). Now having preordered XL2, I've been searching for similar case, but so far haven't found anything that would be close enough match. I went through the Cover thread, and closest ones were cases like this and this but there appears to be few essential differences:
The plastic bumper around looks a lot thinner on these XL2 cases
XL2 cases all have kickstand, which basically means the backside is not as thick/protective against drops
I don't need any CC slots (although having one isn't a show stopper)
Most of these XL2 cases look cheap at least in pictures
Even tried asking @madebygoogle on Twitter, but they didn't have any info on such cases. I'd happily pay that same (absurd) $50 or so for the case that I paid for this 6P case as it really is a premium case I've enjoyed using. Any tips are highly appreciated!
Try Case-mate
Sent from my Pixel 2 XL using Tapatalk
I'm in exactly the same boat...
Nexus 6p Flip case has been phenomenal and I'd like something similar for the Pixel 2 XL.
I'll try to remember to add to the thread, if I find something.
KL1 said:
I'm in exactly the same boat...
Nexus 6p Flip case has been phenomenal and I'd like something similar for the Pixel 2 XL.
I'll try to remember to add to the thread, if I find something.
Click to expand...
Click to collapse
Ditto. Does anyone know who manufactured the Nexus 6P folio?
From what I've found they were produced by adoptednyc.
They show no new items since iPhone 7.
Facebook is quiet too for them.
SOGA makes a really good flip case out of leather that works great.
Sent from my Pixel 2 XL using Tapatalk
jpalo said:
I've been very happy with the case on my Nexus 6P (this looks like the one: https://www.ebay.com/i/131886281154?rt=nc&var=431231132500). Now having preordered XL2, I've been searching for similar case, but so far haven't found anything that would be close enough match. I went through the Cover thread, and closest ones were cases like this and this but there appears to be few essential differences:
The plastic bumper around looks a lot thinner on these XL2 cases
XL2 cases all have kickstand, which basically means the backside is not as thick/protective against drops
I don't need any CC slots (although having one isn't a show stopper)
Most of these XL2 cases look cheap at least in pictures
Even tried asking @madebygoogle on Twitter, but they didn't have any info on such cases. I'd happily pay that same (absurd) $50 or so for the case that I paid for this 6P case as it really is a premium case I've enjoyed using. Any tips are highly appreciated!
Click to expand...
Click to collapse
Tetded leather cases. Very nice. Bit expensive though.
https://www.tetded.com/home/en/501-pixel-2-xl
stumpy352 said:
Tetded leather cases. Very nice. Bit expensive though.
Click to expand...
Click to collapse
I ordered 2 of these(2XL & 2).
Will report my assessment of them when they arrive.
Will likely take weeks, coming from China.
I prefer a flip case because of the added protection for the screen.
Also when I hold the phone in portrait mode I tend to use the flipped cover a secure holding grip.
The main downside is when taking a picture the cover gets in the way if I'm too hurried to get a picture.
I ordered the natural leather finished flip case without the strap or clasps from Tedded.
Looks to be of nice quality whereas it's real leather and not the plastic leather most cases use.
Where do the plastics cows come from? Do you feed them plastic packing peanuts?
kdkinc said:
I prefer a flip case because of the added protection for the screen.
Also when I hold the phone in portrait mode I tend to use the flipped cover a secure holding grip.
The main downside is when taking a picture the cover gets in the way if I'm too hurried to get a picture.
I ordered the natural leather finished flip case without the strap or clasps from Tedded.
Looks to be of nice quality whereas it's real leather and not the plastic leather most cases use.
Where do the plastics cows come from? Do you feed them plastic packing peanuts?
Click to expand...
Click to collapse
[email protected] peanuts
Sent from my Pixel 2 XL
KL1 said:
I ordered 2 of these(2XL & 2).
Will report my assessment of them when they arrive.
Will likely take weeks, coming from China.
Click to expand...
Click to collapse
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
Awesome, thanks for the review! Do you have any photos you can share? Also, where did you order them from? Thanks!
dancole42 said:
Awesome, thanks for the review! Do you have any photos you can share? Also, where did you order them from? Thanks!
Click to expand...
Click to collapse
Ordered straight from tetded.com
The photos on the site are spot on.
I got the case without a strap or clasp.
Case mate has their leather folio case up for sale now.
Had one for my Pixel XL, loved it!
Can't wait to get this one!
Sent from my Pixel 2 XL
TETDED
Just received my flip case from Tetded.
If you desire a case that wasn't made from last months recycled Coke or Pepsi bottle this is the one to purchase.
I bought the flip case without the latch, the classic vintage brown version. It has the feel of fine leather, not something made from camel scrotum. The cover does interact with the screen as it should.
Access to the side buttons is good the fingerprint sensor is recessed a bit but access is also good.
The only downside at the moment is I use a magnetic phone holder in my vehicle that requires a very thin steel plate be applied to the inside of the front cover I usually use a credit card slot of which there are none. Tomorrows project.
the case is pricey but so wasn't the phone now to find a glass screen protector that doesn't have issues.
Don't ask for "pics" friggen Google Tetded.
KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
Thanks for pointing out the Tetded cases. I looked and found they are now being sold on Amazon. Mine arrived today. Happy with it.
KL1 said:
So I received the cases today.
If the Nexus 6p official case was a 10, I'd give these Tetded cases an 8 or 8.5.
The hinge part of the flip cover seems a little flimsy, not in quality but in strength.
This causes the cover to wiggle or sit a little crooked at times. It isn't bad but not perfect.
The only other thing I'd change, if I could, would be to add a bevel to the area around the fingerprint sensor. Having a beveled surface makes it seem less deep when it guides your finger to the sensor. The hole on this case is is good, but again, not perfect.
All cutouts are properly placed, so no issues there.
All in all, I'd recommend this case to anyone who liked the official Nexus 6p case.
Click to expand...
Click to collapse
I know this is an old thread, but I'm in the same boat. One question for anyone that has the TetDed folio case. 1) How's it holding up a few months down the road? and 2) does the cover hold shut via magnet? Or is it just floppy? Thanks in advance to anyone still monitoring this.
mardanny said:
I know this is an old thread, but I'm in the same boat. One question for anyone that has the TetDed folio case. 1) How's it holding up a few months down the road? and 2) does the cover hold shut via magnet? Or is it just floppy? Thanks in advance to anyone still monitoring this.
Click to expand...
Click to collapse
Mine is holding up great, but I'm the type that doesn't have the cover open a lot.
My wife's is not holding up as well cause she is constantly on the phone.
The wear & tear that bothers me about hers is that the cover doesn't rest properly when closed now. it wants to sit crooked by default, resulting in me having to adjust it whenever I see it.
Overall, I think they are still a good option for folio covers, just not nearly as perfect as the Nexus 6p cover.
thanks for taking a chance and for reviewing the leather case.
kdkinc said:
now to find a glass screen protector that doesn't have issues.
Click to expand...
Click to collapse
can you recommend one of these? just received my xl2 last week. (i shattered my oneplus3 2 weeks after receiving it, so i'm trying to be proactive
Related
I'm looking for a premium leather case for my new Galaxy Note and so far the only two that I've found that meet the quality I'm looking for would be the Piel Frame iMagnum and the Noreve Tradition. Which do you think is the better of these two or is there another case you can recommend that's made of high quality leather?
http://www.noreve.com/langue/en/product/Samsung_Galaxy_Note_Tradition_leather_case.html
http://www.pielframa.com/samsung-galaxy-note-cases-imagnum.htm
It would be hard to take a picture using piel one as you need to hold top cover part
Sent from my GT-N7000 using Tapatalk
I also just purchased a Note and also looking for a case. I also am debating between the same two and am leaning towards the Noreve since it opens down. The cover opening from the top will get in the way more. Price is also better.
Piel frama has actually a problem with the magnetic closing mechanism. The s-pen is not working there. They are working on it, and will drop the magnetic thing.
Noreve delivers after 15-20 working days after purchase.
... tapat*lked
I'm waiting on the official brown leather flip case. It looks super.
walda said:
Piel frama has actually a problem with the magnetic closing mechanism. The s-pen is not working there. They are working on it, and will drop the magnetic thing.
Click to expand...
Click to collapse
That doesn't surprise me in retrospect. The wacom pen is magnetic.
I ordered the noreve. Another benefit is without the (maybe now gone) wraparound clip, it should be more pocketable.
- Frank
Unsinkable II said:
I'm waiting on the official brown leather flip case. It looks super.
Click to expand...
Click to collapse
I saw the brown leather one in a German Youtube video and thought it looked pretty nice but that is the only place I've seen it and I can't find it anywhere for pre-order. I only see the blue, white and black versions of the Samsung flip case.
TBH, I remember getting a Piel Frama leather case for a PDA once upon a time which looks just like the one they have for the Note. it was bulky, the belt clip was probably cool then but as the Note is so slim anyway I'd not see any reason to bulk it up even further with that design.
The official leather sleeve looks a better option to me. Currently using the flip cover and it's great, but if it turns out to be too bulky for a dock then a slim sleeve would be my next choice. A belt clip is so 2005 .
Yeah I'm not interested in using a belt clip regardless if the case I buy comes with one. I'm just wanting to find something that will protect the device but also is made from a high quality soft leather that feels like it somewhat coincides with the price of the Note.
It looks like Piel Frama has already updated the case to replace the magnetic closure with a snap judging by the new photos on their website.
I bought a pielframa magnum case in the past for my HTC HD and the quality was suburb and the protection also because its a hard case but very disapointing it made the HD twice as thick and I suspect that will be the case with the note as well .
So if you want good protection the pielframa case will do the job no doubt.
But for me I wait untill I can buy the original samsung pouch to keep the note pocketable
ChodTheWacko said:
That doesn't surprise me in retrospect. The wacom pen is magnetic.
I ordered the noreve. Another benefit is without the (maybe now gone) wraparound clip, it should be more pocketable.
- Frank
Click to expand...
Click to collapse
Hi Frank, so how does the noreve case turn out? Thinking of getting it as well.
Ngambek2003 said:
Hi Frank, so how does the noreve case turn out? Thinking of getting it as well.
Click to expand...
Click to collapse
It is supposed to ship soon.
I'll post a review once I get it.
- Frank
Alright, I finally got my case.
I plan on posting a video review shortly, but initial thoughts:
It's a very nice case. It just looks very classy.
It looks much more professional than the PDair case posted in the other thread.
You kind of push/snap the Note into the case. It is quite secure.
Changing batteries might be annoying.
It does not make the Note much bigger - it adds maybe 2mm to each side.
The clip is well done and I like that it doesn't add to the thickness.
It is thicker (as will all 'covered' cases be, since you need 'hooks' to hold the phone in, and the cover on top of that).
Thickness was never an issue with the Note in terms of pocketability though.
One annoyance is that the cover is about 1mm wider than the rest of the case.
It's not a lot, but you definitely notice it when it's folded back and you're holding it that way.
It kind of digs into your hand a little bit. Not a lot, but noticable.
There is a metal logo on the top right corner of the lid. Their logo has a metal 'ball'. I'm wondering what effect this has if you drop the phone face down, since that's the initial point of impact. I might be overthinking this.
Some things probably generic to all cases:
If you use the belt clip (which I won't), you have a metal 'rachet' which does on the back. If you have that on the phone is a bit awkard to hold in your hand. It's poking into you, or if you have the back flap folded back, makes the phone quite thick.
One very noticable thing - on the 'naked' Note, the power button is higher than the rest of the Note (on that side), making it very easy to accidentally press. It's a common complaint. Now that the case is higher than the power button, it's quite difficult to accidentally hit the power button. That's a very good thing.
One subtle perk of a bottom flap is that you can hook your little/ring finger around the 'hinge' and you can get a little more reckless with how you use your thumb, without fearing dropping the phone.
It'd be nice to have the Piel Frama to compare. I suspect it's lusher, softer, and thicker, but it's also 45 euro more expensive. I'm pretty happy with my choice.
- Frank
I don't have any experience with a Norêve case (looks quite nice BTW), but I own 2 Piel Frama cases.
Soon it will be replaced with the Note, but now for almost 7 years I've been using my iPAQ hx4700 daily with a Piel Frama case.
It's really of exeptional quality (leather, stitching, fit) and still looks as if only used for a few weeks.
I also used a Piel Frama case with my former PDA for about 3 years, with the same experience.
It's true though, as written before, that the Piel Frama cases add some bulk.
But they certainly have a stylish professional appearance.
ChodTheWacko said:
Alright, I finally got my case.
...
- Frank
Click to expand...
Click to collapse
I do like the look of the Norêve case and agree that the flap opening to the bottom is practical, specifically for securing the Note with one hand (especially if you have smaller hands, as I do).
I'm curious which type and colour leather you've chosen for the Norêve case and if it looks in real life the same as on their website.
peseta said:
I'm curious which type and colour leather you've chosen for the Norêve case and if it looks in real life the same as on their website.
Click to expand...
Click to collapse
I got the Perpetual black (it's the only one that is immediately available) and it looks exactly like it's posted.
- Frank
Just got the Noreve. It is outstanding
It reminds me some of the cutting edge best Vaja cases
Their site does not do justice to their product
Sent from my GT-N7000 using Tapatalk
Hey,
to those who already have the case by norêve: what about the closing mechanism? This one produced some very ugly scratches on the plastic surface of my old mobile phone. So, I thought of never buying one with this closing mechanism again, but rather one with a magnetic one. But magnetic is bad for the Galaxy Note as the Pen won't work well.
So, what do you think about the norêve - will it be producing damage to the phone?
Kikouyou said:
Just got the Noreve. It is outstanding
It reminds me some of the cutting edge best Vaja cases
Their site does not do justice to their product
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
how does it feel when you flip the cover all the way (so it's in your palm) and hold it that way? I feel like the cover should be a mm or two less wide.
- Frank
---------- Post added at 01:36 AM ---------- Previous post was at 01:32 AM ----------
lamajstro said:
Hey,
to those who already have the case by norêve: what about the closing mechanism? will it be producing damage to the phone?
Click to expand...
Click to collapse
It's a curved piece of leather - I don't see it doing any damage.
It sort of bends 'over' the top of the phone and holds the cover there.
It works pretty well - no complaints there.
One last amusing thing - the case almost covers the top microphone hole. I kind of think they weren't aware it is there.
- Frank
I've had the Noreve for a couple of days now.
It is just perfect. Looks good. Functions good. Solid. And the leather smells like high quality leather, not some cheap crap.
I could not get a cheap case for a 600 euros phone. That's just not me.
The piel frama could be good also but I thought I could not take pictures with it so I went for the Noreve.
Cheers.
Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks
Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!
You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too
Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.
Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap
How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.
I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.
ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.
is it easy to take it in and out of your pant pocket
denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:
dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.
http://www.ebay.ca/itm/Mofi-Rui-Sli...hone_PDA_Cases&var&hash=item3cd87f0385&_uhb=1
wow, this looks good. anyone have experience with the company?
Just ordered one of these which will be with me in a few weeks from Hong Kong. Should be a nice compromise between a hard case + screen protector with no screen protector and one of these.
Looks far less bulky than a wallet case too.
Nice find
I've just ordered one too :good:
http://www.aliexpress.com/wholesale?SearchText=mofi+nexus+5&catId=0
~5£ including shipping on aliexpress, also ships from china so will probably take 20+ days but I think i'll probably get this and a clear bumper case like spigen or orzly.
delete
do you guys think this is better than these nillkin ones?
http://www.ebay.ca/itm/Nillkin-V-Sm...ll_Phone_PDA_Cases&hash=item3a87630794&_uhb=1
http://www.ebay.ca/itm/Nillkin-Fres...hone_PDA_Cases&var&hash=item35ce434311&_uhb=1
nikulogical said:
do you guys think this is better than these nillkin ones?
http://www.ebay.ca/itm/Nillkin-V-Sm...ll_Phone_PDA_Cases&hash=item3a87630794&_uhb=1
http://www.ebay.ca/itm/Nillkin-Fres...hone_PDA_Cases&var&hash=item35ce434311&_uhb=1
Click to expand...
Click to collapse
I don't know which one is better, both are interesting. My only doubt, for both products, is the back quality, as for what I understood they clasp directly on the mattee surface of the phone. If the cover is badly cut, then back scratches are possible... so I think I'll wait for some feedback first
KaylordTheuZ said:
I don't know which one is better, both are interesting. My only doubt, for both products, is the back quality, as for what I understood they clasp directly on the mattee surface of the phone. If the cover is badly cut, then back scratches are possible... so I think I'll wait for some feedback first
Click to expand...
Click to collapse
exactly what im thinking. also i dont know if the 'flap' closes/sticks properly to the screen on either.
Just ordered one it looks promising, suppose we will see.
Sent from my Nexus 5 using Tapatalk
Case just arrived and i am very impressed with the quality and slimness. The auto screen on feature is working perfectly.
For the price, quality, slimness this case represents a very value :good:
dongagon said:
Case just arrived and i am very impressed with the quality and slimness. The auto screen on feature is working perfectly.
For the price, quality, slimness this case represents a very value :good:
Click to expand...
Click to collapse
Cool, any chance for some pictures? Would be cool to see some real pics of it.
yes pictures please!!!! how is the material? hard or soft? do the cutouts align properly?
I just got one about 5 days ago but they just ship out on 26. Will update some pics as soon as I received it
mine just arrived and I would concur that it is very nicely made, fits very snugly against the phone. If it have a hole for the notification light, and a small suction cup to keep the cover closed like the pudini it would be perfect! Let me know if you want me to take more pictures.
actinium227 said:
mine just arrived and I would concur that it is very nicely made, fits very snugly against the phone. If it have a hole for the notification light, and a small suction cup to keep the cover closed like the pudini it would be perfect! Let me know if you want me to take more pictures.
Click to expand...
Click to collapse
doesnt it have a magnet to keep it closed and do the sleep/wake function?
nikulogical said:
doesnt it have a magnet to keep it closed and do the sleep/wake function?
Click to expand...
Click to collapse
It have a magnet to do the sleep/wake function but the magnet isn't strong enough keep it closed, hence my comment having suction cup thing
Looks cool !! But for $7 is a bit hard to trust the leather quality ...
Mine just arrived and man this thing is heavy for a case but is very good quality for £6.50 including shipping. It's so much nicer now that the screen wakes up as soon as you open the case.
All in all very impressed.
Garbage
This case is crap guys. The material feels nasty and tends to grip pocket lining making it difficult to slide in and out. The flip cover seems to be fashioned out of metal (based on the weight and rigidity) and I have noticed signal reception fluctuating with flap orientation. I get that it's a $10 and expectations are low, but you can do much better than this. Anyone tried to the Nilikin or can recommend any other quick cover knockoffs?
Today I looked for a leather case with a sleep/wake magnet.
Until now 3 out of 5 do not have a magnet - the other's answer is still outstanding.
However what I really don't get is: Why does no case have a cut-out for the notification light. I would even say, that this is more crucial than the cut-out for the earpiece.
Or does anyone know such a case?
When I ordered my official Google Nexus 5 Bumper in Red I was more than excited to have an official case I knew I wouldn't have any problems with.
Upon opening I loved it. The red bumper on my Nexus 5 looked fantastic! I was thrilled that I was going to be carrying it around now.
First:
It fits perfectly with the buttons on the sides as well as cutouts for speakers and buttons. There's no doubt about it, although the buttons may be a a little harder to push at first, due to the case's button popouts being rigid, you can quickly get used to this and it isn't a real problem. The cutout for the speakers don't seem to limit the sound at all, so that was all good. And the cutout for the charging port fits most chargers without any issue. I only had an issue with one of my cables that has a huge plastic piece around the micro USB metal piece, but it wasn't made for the Nexus 5 so it doesn't really affect my opinion of the cutout. Plus it works with wireless charging, so that's a plus. The cutout for the headphone jack fit all my headphones perfectly, even ones with the L-shaped jack, so I was happy with that as well.
Other than that, I loved the relatively slim design of the case as well as the nexus logo on the back. I can noticeably feel the case's added width when I take it off, but it isn't a huge difference like many other cases may add. So it keeps the device still relatively slim.
BUT I WAS DISAPPOINTED after I put it on and started assessing the actual fit. I thought it would be a harder material. Although it "snapped" on perfectly, the case was loose around the top and bottom.
On the top:
The case could be pushed in, to where it would make a sound from rubbing on the Nexus 5. I adjusted the case and put it on again but nothing. It almost felt like the cheaper silicon cases bought for devices that eventually warp and don't fit properly. This is extremely annoying (at least for me) because I expected the case to be a perfect fit on the top and bottom without me being able to push parts of the case and have them move, or make a rubbing sound.
On the bottom:
The same thing occurred. The small piece of rubber above the charging port (closest to screen) is very flimsy. I noticed wear from two days of use. This involved taking it out and putting it in my pocket. My pants aren't tight so it wasn't a squeeze. It came from me grabbing the case right above this small piece of rubber and pulling it out. As with the top, I can push this piece of rubber pretty easily and have it move in and out (or up and down, however you want to say it). It seems it will continue to get looser until it is warped a bit.
Overall:
I was disappointed with the case. I contacted Google and as per their return policy they offered a refund without returning or swapping the case. The top and bottom "mis"-fits really killed the excitement for the case. With the top being able to be pushed in AND making a rubbing sound, it irritated the crap out of me. And with the bottom rubber piece over the charging port being flimsy and possibly warping JUST from everyday use of the case, I can't love the case like I wanted.
Last thing:
Anyone else have this issue? Or any other issues? When I read and watched multiple reviews, none of them seemed to show all of the bad things I found with my case. So part of me thinks it may be just mine. I am considering ordering another with the refund offer but I am hesitant to spend money on another and have the same results.
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
same here. it works perfectly with my phone too. no loose top or bottom areas here. i don't know about slim but it is handy and gives a good grip. also the charging point rubber you talked about? for me it's a bit tight fit for the charging pin but it just gives way when pushed with a bit of presssure and comes back when pin is removed. otherwise no problems for me with this case and i'm pretty satisfied.
eazyweazy3 said:
I use the official bumper case for my 5 in the really dark grey/black color. I really like this case. I didn't pay full price for it so that might be why I don't mind it as much.
I do not have any loose areas anywhere on mine and fits very snug.
I seem to be in the minority here as I really like using this case. It's simple, slim, feels good, fits nicely, it's everything I need and want in a case. I'm extremely cautious with my phones and would never be caught with an otterbox or any other humongous case. For me slim and simple is the way to go.
Sorry to hear you encountered some problems with yours.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Where did you get it ?
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
wolfen69 said:
I saw a video about the replica bumper cases from China and decided to get a couple of them. They said the quality was identical to the ones from Google. Plus, it was only $20 for 2 cases. When I get them, I'll post here with a mini review.
Click to expand...
Click to collapse
Are they really the same quality ? And if they are would you post a link too ?
Vanilla Pudding said:
Are they really the same quality ? And if they are would you post a link too ?
Click to expand...
Click to collapse
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
wolfen69 said:
Here's a youtube video of the replica case. Looks good to me. Btw, just search ebay for the cases.
Click to expand...
Click to collapse
Can I buy from eBay with something other than PayPal ?
Vanilla Pudding said:
Can I buy from eBay with something other than PayPal ?
Click to expand...
Click to collapse
Do you want me to hold your hand? Figure it out.
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
ToZoX said:
I would buy this, if the peeling issue wouldn't be present.. how is your opinion?
Click to expand...
Click to collapse
I haven't received them yet. Will let you know as soon as I get them. Shipping from China takes a while.
I got a red one about 3 weeks ago.
It started peeling (sort of) at the corners within 10 days, black material was showing up.
Upon removing the case, I discovered that it left long marks on the rubbery back of the black Nexus 5, along the ridges of the bumper.
Thats when I decided to sell it off.
Simply put, it looks awesome, fits awesome, but as a product, its bad, and not at all worth the money.
Atleast those marks are slowly dissappearing (Trust me, those arent dust or something)
I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk
A crazy idea that might work....
I had an idea! The Axon 7 measures 5.97 x 2.95 x .31 and the Google Pixel XL measures 6.09 x 2.98 x .33. With my TPU case on, I think if I purchase the Seidio spring clip holster this might just fit the bill. The side rails might be cutting it close, but I am willing to take the chance.
Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder
Boutchoo said:
Edit: am dumb
Edit2: I was right, it has a belt holder: Case with holder
Click to expand...
Click to collapse
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Sent from my ZTE A2017U using Tapatalk
emtownsend said:
I tried that one. It has a critical design flaw. When I put it into the belt holder, the belt holder pushes, and holds, the power button hard-rebooting my phone every time. I think the inner rubber phone case fits loosely which causes too much material over the power button. LOL Otherwise it isn't that bad of a combo.
Click to expand...
Click to collapse
Amazon. Com
Received my Poetic Revolution series case for my A7 today. I am very impressed by it thus far, especially by the built-in screen protector since there are no full screen tempered glass protectors for the A7 due to the curved glass. I don't plan on tossing my phone around to test out the durability but it feels like it is going to offer some good protection all around.
Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?
I'm very happy with the one given in the box.
Envoyé de mon ZTE A2017G en utilisant Tapatalk
nek4d said:
Is there any flip cover case with sleep/lock function, like the original?
Couldn't find any, on ebay or EU amazons, except the original from US which costs 55 $ with postage to Europe...
Nillkin, who has such nice quality and economy cases, has not produced an Axon 7 case.
Any suggestions pleaseeee ?
Click to expand...
Click to collapse
You can buy the original from ZTE or B&H. Both dropped the price to 9.99 USD. B&H I know ships internationally-don't know about ZTE.
https://www.zteusa.com/products/accessories/
https://www.bhphotovideo.com/c/product/1297278-REG/zte_a2grcas_clear_view_folio_case.html
I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary
borijess said:
I just ordered this metal case.
https://www.amazon.com/gp/aw/d/B06XZ3PV82/ref=ya_st_dp_summary
Click to expand...
Click to collapse
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.
rEVOLVE said:
Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.
Click to expand...
Click to collapse
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.
borijess said:
Just got the case today. I ordered a black one and i got a silver mirror looking back. I will be sending the case back. The back is plastic and it very reflective. The only metal is the bumper.
Click to expand...
Click to collapse
Ah, sorry to hear about that - I was hoping you had good news, but it seems not only did you not get what you wanted, but have to go through a bit of inconvenience to return the product. I appreciate that you shared your experience, though- thanks a lot for saving me from the same mistake.
I've using my poetic case for a few months now, and thus far I have a few complains
- flaps they remain open after a while, I cut them off both recently
- screen protector awful scratches easily, removed it and used a higher quality protector instead
now is near perfect the case plays well with third party screen protectors and is VERY sturdy, has saved me from QUITE a few drops
emtownsend said:
I'm trying to find a case with a belt clip but I've only found one believe it or not. Searching Amazon I've found the same case rebranded a hundred times over.
Problem is, I bought one and it has a critical flaw. With the case on the phone, insert it into the slip holster (aka clamshell) and the railing of holster constantly pushes the power button, so every time I pull out the phone, it reboots! I though it was my phone at first. Anyway, all designs on Amazon are the same! Just overseas made and sold by differing names.
I checked eBay too
I have found some nice horizontal cases (with a flap) that I think will work but I'm feeling like I will never see a true clamshell or clip design for this device...
I don't pocket my phones at all. I find it ruins the finish and is uncomfortable to me.
Just a rant. Anyone know of a well built case that offers a belt clip. I'll pay the price for a quality case, gladly!
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
I spent tons of time looking for cases for the Axon 7 and found that honestly there are 5 variants. The poetic tank case, the Spigen "rugged armor" case, the dual layer (rubber plus plastic) case thats rebranded by tons of companys, the "iron man" dual layer case (Also rebranded by various companies), and the belt clip one with terrible reviews because of the problem you stated. There are a few others that are some variation of the above or some see-through ones with bumpers but honestly none seemed satisfactory.
In light of this I decided to opt for ZTE's own hybrid material case. I haven't dropped the phone since I put it on but it is definitely sturdier than the case they included with the phone and the material is hard enough yet flexible enough that it seems like it would be able to take a hit without causing any damage to the phone. It also fits really well and is not bulky either. I realize this might not be what you're looking for but for some strange reason good quality cases are far and few between for this phone (perhaps due to some kind of licensing issue from ZTE?) so that case might be your best bet :/. You could potentially get some other kind of belt holster and have this phone sit in it while in the case.
Link for ZTE case: https://www.zteusa.com/axon7-co-mold-protective-case
Aluminum doom
Though this question was posed back in May , I didn't see a response answering the question so I'll answer it for you in case anyone else is curious . I purchased the Mirror case for $3.89 on eBay in piano black . ( I always seem to find better deals there and easier to navigate then the Big A but that's just my opinion). It is indeed a beautiful case and mine came in with no damage whatsoever . Indeed it is a tight fit putting the back on but once you get it in place everything does line up perfectly . The concern from another member was whether or not the signal would be blocked with the aluminum casing around the edges . The answer is a very easy yes . The signal degrades horribly . I only get two bars inside my home and with the case on it dropped to 0 with no signal whatsoever . It does get some signal outside but it's not worth using this case if I may be missing important calls or messages from clients . Sadly it's just a beautiful case with poor execution with the materials involved . Fortunately I didn't lose much on the case itself . I really wanted this one to work strictly because it looked so awesome even though it's not great when it comes to protecting the phone itself in a drop . Hope this helps if anyone else was curious about the case.
[=rEVOLVE;72176896]Please report back when you get it, as I'm very curious how it works with signal - every metal case I've ordered in the past for my other phones has reduced the signal slightly to significantly. I had thought the slightly wasn't a problem - what's a decrease of 1-2 bars when you're at full strength anyway?
The problem is when you're in a poor signal area and you NEED that 1 bar and you have to take the phone out of the case to work!
On another note, I wish that someone would make a simple backless bumper case - I miss those days when I could use my phone practically naked with just a protective bumper around the sides.[/QUOTE]