i recently tried to update my universal, with the crossbow rom, after pluging the device in my desktop, it started with the update, and placing a message, connection erorr , resulting in ,that my device is stuck in the boot mode, and will not react anymore.
i have tried to update ,without result , i keep getting the message 150 connection error
id there anybody out therer who has had the same problem, if so did you fix , and how did you fix it?
regards peter
I will tell you what I did it my be wrong but I unpluged the usb from the uni and pushed the front light button,power button and the reset at the same time and pluged it in again you get the popup found new device ppc. Then reran the rom update.
NO, just take the SD Card out of the slot and proceed with the update. You must be using a 4GB SD Card, aren't you?
rom upgrade ,universal dead
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
pcsw said:
i keep getting the following message, even if i take the 4gb sd card out of device:
error 150 rom upgrade utility error.
please help it is driving me crazy.
regards peter
Click to expand...
Click to collapse
Hi, are you able to get in to the bootloader mode?
Try reading:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
http://wiki.xda-developers.com/inde...ose stuck on Boot Screen (UNI_exitbootloader)
Hope it helps.
Ok so, this is my first android phone and after being prompted to install the 2.2 update on my European htc desire, i downloaded and started it installing. It gets to about 23% and says process system unavailible and after reading what people said i cleared the phone and tried to install the update manually from the SD card. This didn't work
My phone currently does this
Will boot into what it says is 2.2 but with no wifi, no service, and no SD card showing up
then after about 5 minutes it will reboot.
I have no idea what i can do to fix this? could someone please help me, i'm a noob with android so a clear step by step would be much appreciated
anyone
I am having the same issue... Anyone some help please...
I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.
Futurian said:
I had a symetrical experience.. I can't post links yet, but you if you look at my posts you should be able to find what worked for me.
Click to expand...
Click to collapse
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it
Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale
F3L1X1 said:
how did you create a blank goldcard, i can't access my SD card on my phone while it's in the phone so how did you do it
Click to expand...
Click to collapse
I followed the instuctions in the "[TUT]Complete upgrading guide(root, unroot, flashing ROM & updates)" thread within Desire Android Development. (Post #3)
dedlite said:
Do you have a WIFI connection? I do, and did the OTA 2.2 upgrade over WiFi with no problems, on my Unbranded European HTC Desire.
If youre phone won't boot properly, there are a few answers; 1) Return in to HTC, they're getit working and back to you, 2) Return it to th place of purchase, 3) Root/reflash (but sounds like it might not be an option).
Dale
Click to expand...
Click to collapse
When I got in touch with HTC they wanted £50 to do a reflash, falsely accusing me of rooting my device..
was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix
maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312
HugoTouchHD said:
maybe a silly question but did you try a factory reset?
http://www.htc.com/www/howto.aspx?id=805&type=1&p_id=312
Click to expand...
Click to collapse
yeah i did that, about the only advice the australian HTC support guy gave me -____-
F3L1X1 said:
was that 50$ to send it to them? or can they do it without having it there. Because if THEIR update screwed up my phone i don't see why i should have to pay for a fix
Click to expand...
Click to collapse
Tell me about it, so thankful I managed to fix it myself!
It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here
jameson_uk said:
It sounds like you are alll applying an OTA update for the standard ROM to what was a branded device. There are lots of explanations as to how to fix this if this is the case
In summary
Download update from mentioned here
Copy this to root of your goldcard and rename to update.zip
Turn off phone
Turn on holding down vol down
Select Bootloader then Recovery (an image of device should appear with exclamation mark over)
In menu (sorry forgot how you get in, if it does not appear then try power+vol down or power + back). From there choose apply update.zip
Wait while update applied
After update select reboot and wait for device to boot
Video of it here
Click to expand...
Click to collapse
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000
Can't find update.zip on SD card during recovery
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?
chessmaster82 said:
I've just tried this again, installation looked like it went through ok, rebooted and relaoded into sense, then it shows me a status bar counting, normally this gets to about 10% then says ?Sorry process system is not responing, so i can either click wait or force close, then in continues upto about 97% then reboots and reloads only to load a white screen showing htc and continues counting in percentages, gets to about 15% then says force close, then onto about 91% then reboots this goes on for a while until it just shows me a sorta bricked phone with no wifi, gsm or any real functionailty and it continues to reboot every 5 mins, back to where I started showing 2.2 as installed
One strange thing I have noticed is that my CID is
CID: 00000000000000000049E917D100A69E
Reversing CID
CID: 00A600D117E949000000000000000000
Click to expand...
Click to collapse
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it
F3L1X1 said:
i get this same problem. How do i create a gold card if when i plug in my phone to my pc it won't recognise it and when i put the SD in the phone the bricked 2.2 won't recognise it
Click to expand...
Click to collapse
I had to format the card in a card reader in my PC, then use the Gold Card Creator mentioned elsewhere in the thread. You have to install HTC Sync because enough drivers are in there to at least allow the apps to 'see' the card at physical level, even if the bricked Android doesn't. Set the phone to USB debug mode in Settings/Applications - the phone stays 'on' long enough between reboots to do that and get a CID out of it! Then Gold Card Creator works well enough to get the CID from the SD.
I'm trying this again with a 2GB card to see if makes any difference.
Check folder settings when using windows
bearMedicine said:
Tried all this, thanks. Goldcard created using Gold Card Tool 0.0.5 (awesome job Klutsh) . I get the error message:
"E:failed to open /sdcard/update.zip (No such file or directory)" even though it is in the root dir when I look at the card on my PC.
Should it be in a directory called /sdcard ?
Click to expand...
Click to collapse
Quick update to this. Make sure you have extensions of known file types SHOWING in your folder settings. I was naming the file update.zip.zip!!
Thanks to ALL in this forum for get apps and assistance. I unbricked my phone tonight thanks to you all
well i phoned the shop here in australia that i bought it from and they said they've had alot of desires being returned because they've been bricked by the update and to just send it back and they'll fix it and update to 2.2 for me
My Desire Z seems to have suddenly gone into READ ONLY mode, It starts up fine with no problem ,but I'm unable to install anything new, and anything that seems to be deleted magically re-appears at the next boot.
I also am unable to Go to Recovery, and resetting the phone to factory default does absolutely nothing.
Any help will be apreciated!.
iamzain said:
My Desire Z seems to have suddenly gone into READ ONLY mode, It starts up fine with no problem ,but I'm unable to install anything new, and anything that seems to be deleted magically re-appears at the next boot.
I also am unable to Go to Recovery, and resetting the phone to factory default does absolutely nothing.
Any help will be apreciated!.
Click to expand...
Click to collapse
Did you tried to mount it on a computer?
Reboot without the SD card inside?
As you're not rooted, a fix permission can't be done...
iamzain said:
My Desire Z seems to have suddenly gone into READ ONLY mode, It starts up fine with no problem ,but I'm unable to install anything new, and anything that seems to be deleted magically re-appears at the next boot.
I also am unable to Go to Recovery, and resetting the phone to factory default does absolutely nothing.
Any help will be apreciated!.
Click to expand...
Click to collapse
Is this your problem? If so it should help: http://forums.androidcentral.com/ge...rd-mounted-read-only-can-t-write-sd-card.html
Reply...
It's not the SD card that is readonly - it's the device itself, any Text message that is deleted reappears at the next boot, it is not possible to install anything new and a factory reset does absolutely nothing - the device just boots up the same as it was before the factory reset!.
keeps popping up every time the option that the phone display under the message is reset phone after i press reset phone it reboots into recovery i tried factory restore it loads all the way thre then i reboot phone and it takes me right back to the same message (ecryption unsuccesful) i tried wipe cache ,going to zte website and downloaded the sd card upgrade for my device which gives me error status 7 every time i try to update from sd card and when i try other upgrades i find over the internet some say get prop error , e signature error i dont have debug enabled ,rsa key or clockwork recovery i no it has to be a way to fix this ....adb says device unauthorized so i cant fastboot please someone help me
Hello,
I have a HTC Desire 820 White/Blue mobile phone and about a week ago, suddenly it stopped working. When I try to open it, fastboot screen pops up and I couldn't find a way to surpass it:
I asked around some FB groups and they told me that it lacked stock rom and I needed to load a stock rom into it. When I searched about this in the net, I found this rom:
androidfilehost. com /?fid=24438995911974313
I downloaded this one, loaded it to my SD card, inserted it into my phone, and when I tried to turn my phone on again, the same menu appeared. I had tried to load a rom(which didn't work because it was incompatible with my phone's version) before, and that time, when I selected "HBOOT", it found the rom in the SD card and tried to load it(but couldn't, because as I said, it was incompatible; then I found this compatible rom). But this time my phone didn't see the rom in the SD card, accordingly didn't try to load it.
What did I do wrong? What should I do?
Thank you by now.
Sorry for my bad English btw.
provide info
Dudeless said:
Hello,
I have a HTC Desire 820 White/Blue mobile phone and about a week ago, suddenly it stopped working. When I try to open it, fastboot screen pops up and I couldn't find a way to surpass it:
I asked around some FB groups and they told me that it lacked stock rom and I needed to load a stock rom into it. When I searched about this in the net, I found this rom:
androidfilehost. com /?fid=24438995911974313
I downloaded this one, loaded it to my SD card, inserted it into my phone, and when I tried to turn my phone on again, the same menu appeared. I had tried to load a rom(which didn't work because it was incompatible with my phone's version) before, and that time, when I selected "HBOOT", it found the rom in the SD card and tried to load it(but couldn't, because as I said, it was incompatible; then I found this compatible rom). But this time my phone didn't see the rom in the SD card, accordingly didn't try to load it.
What did I do wrong? What should I do?
Thank you by now.
Sorry for my bad English btw.
Click to expand...
Click to collapse
on fastboot mode connected with pc apply this command using adb
fastboot getvar all
then copy info here n lets see if i can help you