[ROM][QI5][6.0.1][15Nov2017] Stock-ish Plus Tidbits - Sprint Galaxy Note 4 Android Development

CMDMOTO PRESENTS
SM-910P Sprint Note 4 Stock-ish with Tidbits[​
DOWNLOADS,MODS & RECOMMENDATIONS
AT BOTTOM OF MAIN POST
CHANGE-LOG IN POST #2
HELP ME POST #3
Read Before posting Issues
JUST LOOK HERE 1ST!​
PREREQUISITE:
Please update to N910PVPU5DQI5 firmware which can be downloaded from here by using Samsung Odin
I can not guarantee that you will not have problem if you are on another firmware/modem/bootloader
OK THE DISCLAIMER PART:
I can't be held responsible for the effects of this software, it was designed for testing purposes and fun.
Please make a backup, make sure you have a computer handy with odin
Please take sometime to read all documents before proceeding, you've been warned.​
Installation Steps:
1.) Download desired Rom Version from below download link(s)
2.) Place Rom preferably on external SD card
3.) Reboot device into recovery either using Busybox or from device powered off method. (instructions in post#3)
4.) Once in recovery its HIGHLY recommended to install on a clean device. Select Wipe, Then advanced,
put check marks next to System, Dalvik-Cache, Data, Cache
5.) Recommended but NOT necessary: Once wipe is completed, back up one step and choose FORMAT DATA, it will require you to type YES to complete.
6.) When completed return back to Main TWRP screen, Click Mount and make sure System and Data are mounted.
7.) Choose Install then Navigate to where you placed Rom ( You made need to choose SD as the storage location if you put on SD )
9.) Install Rom and wait for it to complete. Once done, wipe Dalvik-Cache/Cache then select reboot and WAIT.
10) Most importantly ENJOY!​
Downloads
N910PVPU5DQI5 ROM's​
Version QI5_Plus_TidBits_VB3. 0.1 UPDATED 12/26/17
Download: https://www.androidfilehost.com/?fid=745849072291696912
MD5: 12949cf4316c57e9d41c7ee455735f7b
See post #2 for change log
Version VB2.3 UPDATE
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Debloated/)
Download:https://www.androidfilehost.com/?fid=745849072291691001
MD5:8fb04d7a0c49b7a9ea7d46f8eff68b16
Version VB1.2UPDATE
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Full bloat/)
Download:https://www.androidfilehost.com/?fid=889964283620768428
MD5:69bf670e1a84df8f4e6671c1c542aa99
Version VB2.2
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Debloated)
(Im having trouble removing Itson at this time and will update when I can, Knox is removed but does show in "About Device")
Download Link:https://www.androidfilehost.com/?fid=817906626617947754
MD5: cc54ff7f04b824ccc2f171f943c118c8
Version VB1
(QI5 Deodexed/SuperSU/Busybox Added/ su.d added/Knox and Itson removed/ Full bloat)
(Im having trouble removing Itson at this time and will update when I can, Knox is removed but does show in "About Device")
Download link:https://androidfilehost.com/?fid=889964283620766514
MD5: 17301de2f9288485781c6a230458bdf9
​
NOTICE:
The install process will take some time (Approx 15-20 Min), later builds have zip-align at boot to help with de-odexed speeds.
Please help each other out, I will not always be able to answer questions due to having a family, school, work and starting a business. Please be easy on me because this is my first time to build and I am very new to this. Be aware I do NOT support other images/kernels/mods, and i'm unable to help with issues you have if you choose that route. Please post in the appropriate page where you got the images/kernels/mods for best support!
​
Bugs​
None known at this time​
Developer(s):
@cmdmoto
Contributor(s) and credit to :
@carlosggb for answering questions about ROM developing
@tx_dbs_tx for sending me in the right direction
@wanam for Xposed framework and XTouchWiz
@ViPER520 and @zhuhang for Viper4Android! (An absolute must have for any ROM!)
http://vipersaudio.com/blog/
Please remember to use “Compatible Mode” if you inserted other sound mods.
@topjohnwu for Magisk!
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
@Chainfire for SuperSU!
@SuperR for his wonderful Kitchen!
Built Using: SuperRs Kitchen. Great Tools For Any DEV!​
XDA:DevDB Information
CMDMOTO Stock-ish plus Tidbits, ROM for the Sprint Samsung Galaxy Note 4
Contributors
cmdmoto
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: N910PVPU5DQI5
Version Information
Status: Testing
Created 2017-11-15
Last Updated 2017-12-26

Changelog:
QI5_Plus_TidBits_VB3
Deodexed
Magisk SU
Busybox
su.d added
Knox/Itson removed
Debloated
Viper4Android added as system Apk
Xposed added( Still need to download the framework from here https://androidfilehost.com/?fid=529152257862685344
XTouch added
1000+ fonts added (May take up to 45 seconds to load)
Removed power on/off sound/volume adjust sound
LG Sounds added to ringer/notifications/alarms
Enable Call Recording
Disable SMS to MMS converting (I Feel like I need to removed this)
Shutter Sound option in camera setting
Show NFC Icon if on in statusbar
Second Site in Smart Manager like Note5
Call and SMS blocking menue in Settings
Enable Auto Data connect to send and recieve MMS without Toogle Data
Enable Black list in Stock Message settings
Enable Save/Restore in Stock Messag
Enable Support Recent App Protection
Text Messages has actual time it was sent, Not when your cell received it
Enable Camera During Call
Added Toggles Wifi;WiFiHotspot;MobileData;NetworkBooster;Bluetoo th;PowerSaving;UltraPowerSaving;Location;Sync;Sile ntMode;AutoRotate;MultiWindow;AllShareCast;QuickCo nnect;SFinder;AirView;AirGesture;SmartStay;SmartPa use;SmartScroll;AirplaneMode;CarMode;DrivingMode;D ormantMode;Ebook;ToddlerMode;SmartNetwork;Nfc;SBea m;Toolbox;TouchSensitivity;WifiCalling
Enable Menu Block Cal lMsg
Disabled Roam Guard
Enabled Menu Request for Mms Read Report
Enable Sms Delivery Report
Max Recipient Length 100
Enable Message Block Notification
VB3.0.1
Removed V4A due to not working properly
Enabled SMS to MMS converting
Cleaned up CSC edits
Enabled all 30 toggles

Help me Section:

cmdmoto said:
Reserved #2
Click to expand...
Click to collapse
Awesome buddy! Welcome to the Dev's Club!

download links
Hi. Appreciate your contribution but where are the download links at?

Uploading now. I'll let you know when it's finished. It's just going to be one ROM for the time being.

File is uploaded!
https://androidfilehost.com/?fid=889964283620766514

Thanks. Nice to see devs keeping the glorious note 4 alive.
Install almost complete. Thanks again Dev.

Version VB2 added to OP. Uploading now.
Edit: OP updated with download link

Been running VB1 for a few days. It's very stable and I'm happy with it. Don't know why the gallery crashes though.
Thanks for keeping development alive.

My mobile data went out today I'm not sure why. Loaded another ROM and data returned. Anyone wife lose data?

ibedanny said:
My mobile data went out today I'm not sure why. Loaded another ROM and data returned. Anyone wife lose data?
Click to expand...
Click to collapse
Made a few tweets to the builds and they are running much smoother. I'm going to have an update to VB1/VB2 and hopefully a new VB3 soon. I noticed that there were a few problems and fc from that last builds. I did have some data issues as well so you are not alone. Hope you all are enjoying the builds. I'm assuming that no news is good news and that things are running good.

OP Updated with new builds.
Should not have any F/C's or errors.
All builds now have Magisk , Itson and Knox has been removed! I'm currently working on a VB3 build that will be debloated with Viper4Arise, additional fonts and LG sounds.
Enjoy!

Thank you for these updates. No longer having gallery crash. Smooth and stable ROM.

So i flashed this ROM, but im not seeing Magisk. From the build thread, did it mean it was removed? The way I read it was that only Knox was removed

jzomb13 said:
So i flashed this ROM, but im not seeing Magisk. From the build thread, did it mean it was removed? The way I read it was that only Knox was removed
Click to expand...
Click to collapse
Knox and itson are removed. Magisk is in the build and will be flashed along with the ROM. You should see Magisk flash after the ROM flashes. Which version are you on? Did you check MD5?

I tried to flash this rom, followed directions. I'm definitely on q15 (ota) and it's a Sprint note 4. Rooted, installed TWRP and it was stuck on this screen for hours: Setting permissions... I thought it would finish by morning but no any help? The only thing I can think of is that it's not a compatible TWRP version. I made the mistake of not backing up since I just got the phone. So I'm stuck here. Got any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LGLS992 using Tapatalk

imdaman99 said:
I tried to flash this rom, followed directions. I'm definitely on q15 (ota) and it's a Sprint note 4. Rooted, installed TWRP and it was stuck on this screen for hours: Setting permissions... I thought it would finish by morning but no any help? The only thing I can think of is that it's not a compatible TWRP version. I made the mistake of not backing up since I just got the phone. So I'm stuck here. Got any suggestions?
Click to expand...
Click to collapse
Make sure your on TWRP 3.1.1. Did you check your MD5? I would try and re-download/verify MD5 and flash again. I test all my builds before posting. I bet you won't forget to backup before flashing again? it shouldn't take more that 5 to 10 to flash the zip and no more than 20 minutes to load

Please can anyone tell me if this rom contains french language ?

kepnosa said:
Please can anyone tell me if this rom contains french language ?
Click to expand...
Click to collapse
Unfortunately it does not. Sorry

Related

[ROM] UltraPOP [ZVG] [09-17-2015] [Ver V2.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UltraPOP V1.2 ZVG
Heavily Modified / Customized Lollipop 5.02​
Features:
V1.0
Ultra De-Bloated
Ultra Stock Tethering Activation
Ultra Light Google Launcher
Ultra Loud Audio Enhancement
Ultra Smooth I/O Tweaks & Caches
Ultra Tweaked ONDEMAND Governor
Ultra Bumped Camera Picture & Video Quality
Ultra Slick YAATA Beta Messaging App By Kajozord (With Permission)
Ultra Smooth Live Weather Wallpaper & Widget App
Ultra Injected INIT.D Support
Ultra Handy Busybox
Ultra SIM Unlock *Still Issues - Still No Solid Solution But Working On It*
V1.1
Another Bump In Audio Boost
Added Adblocking
Much More Bloat Removed
Many More VM/Kernel/Task Tweaks
Put Back Stock LG Music Player
Fixed FC Choosing Custom Ringtone
V1.2
Removed More Bloat (almost down to 700mb = over 2GB free in system!)
Slight OOM Tweak
Fixed Wifi Tethering
Replaced APNS File
Prop Tweak
Updated To Latest Release Version Of YAATA (No More Beta!)
Updated To Latest Version Of LiveWeather
* SIM Unlock has been reported to STAY if you already had it on a 5.02 Stock ROM and flash over it.
Installation: (UPDATE FROM ULTRAPOP V1.x)
(1) Backup Current ROM / All Partitions (Optional)
(2) Wipe System & Cache (NOT DATA)
(3) Install Updated UltraROM
(4) Reboot After Completion And Enjoy!
Installation (For ZVG, ROOTED & AUTOREC USED):
You MUST be on Stock Lollipop
You MUST be rooted
You MUST have run AutoRec By @bender_007
(1) Backup Current ROM / All Partitions (Optional)
(2) Wipe System, Data, Cache
(3) Install The ROM Of Your Choice
(4) Reboot After Completion And Enjoy!
*LG Logo Boot Screen Is Normal For 5-10 Minutes!
*Don't Forget To Log-In Account, Update Profile & Reboot!
*UltraPOP will NOT work with the JellyBean Bootloader or Jellybean/KitKat Radio!
Installation (For NON-ZVG Only) SEE Second POST!]
Future Plans:​
Hoping to use DorimanX Kernel In Future Builds (He Is Close To Completing Lollipop Kernel)
Many More Memory / Governor / System Tweaks & Fine Tuning v1.1
Removing any remaining useless bloat v1.1
Add Advanced Reboot Menu (User Requested)
Add Adblock Program (User Requested) v1.1
Download Links:​
Link: UltraPOP V1.0 ZVG
Link: UltraPOP V1.1 ZVG
Link: UltraPOP V1.2 ZVG
***Still Working On A Viable Solution For SIM UNLOCK BAKED IN
Link: AutoRec LS980 Lollipop Link
Link: Root ZVG Linkhttp://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596http://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596http://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596http://forum.xda-developers.com/sprint-g2/development/root-stock-zvg-t3094596
Link: ZVG MODEM (Just To Have)
Link: ZVG KERNEL (Just To Have)
Extra ADD-Ons:
** Just Flash These In Recovery & Reboot! **
VVM (Voice Mail)
Link: https://www.androidfilehost.com/?fid=23991606952608795
LG-Calendar
Link: https://www.androidfilehost.com/?fid=23991606952608817
LG-Email / Exchange
Link: https://www.androidfilehost.com/?fid=23991606952608818
Please Buy Me A Coffee Or Show Appreciation:
click-> DONATE <-click​
PLEASE HIT THE THANKS BUTTON!​
COMING FROM NON-ZVG
Unfortunately The ONLY proper steps are:
(1) TOT back to ZVE
(2) Accept the OTA ZVG update or sideload the ZVG update
(3) Root ZVG
* At this point I also recommend a full factory reset from ROM (yes your SD Card will be wiped) *
(4) Install AutoREC for Lollipop
(5) Reboot to TWRP Recovery
(6) Wipe System, Cache, Data
(7) Flash UltraPOP Zip From Latest TWRP Recovery
*Reboot and be patient for 5-10 minutes
PLEASE HIT THE THANKS BUTTON!​
If you would like UltraPOP on your phone variant of the LG G2, please PM me and I will send you the things I need from your phone to create that version.
Here we go.
Copying over to internal memory, planning on flashing here in a second. Quick question first though. I am coming from AOSP (previously was running Cloudy G2 2.2), if I flash the Lollipop radios, am I good to go?
Answer, no. Cloudy and aosp required jelly bean. To get to this zvg stock based ROM. You can go this route. Download the ROM, the zvg radio, and the lollipop auto-rec.
Then run auto-rec for lollipop. TWRP it. Restart in recovery. Wipe as you should. Flash zvg radio, flash ROM. Reboot.
You should be working then.
Thank you. Starting on that now, will report with some initial observations.
question.
When im already sim unlocked and used to upgrade roms i never lost the unlock do u think this will work the same way ?
Also does this have proper display for 2G 3G ? or is it sprint default which just shows GSM ?
Hey can you add addaway host like cloudy..just a suggestion..will try and report back..
berz said:
question.
When im already sim unlocked and used to upgrade roms i never lost the unlock do u think this will work the same way ?
Also does this have proper display for 2G 3G ? or is it sprint default which just shows GSM ?
Click to expand...
Click to collapse
You might be flashing global roms like cloudy it wont get you locked. but this rom will. i have tested.
marxist said:
Hey can you add addaway host like cloudy..just a suggestion..will try and report back..
Click to expand...
Click to collapse
You can flash it if through twrp its just a zip file.
Besides that looking forward to this project Great work
GSM unlock:
1 - USB debug
2 - root
3 - install adbd-Insecure-v2.00.apk adbd-Insecure-v2.00- XDA > launch > select Enable insecure adbd
4 - install and run simfree.exe (yes, on your PC)
5 - reboot
6 - profit
if Internet is still not working:
1 - dial ##3282#
2 - APN settings -> Internet -> APN NI, (type your AP), > menu (3 dots at the top right) .> Save
Great job, Agimax! After clearing data for the play store, everything seems to be working well.
waw... Thanks @Agimax these super good at this, when you have the rom with sim I'll unblock a flash !! Thanks again !!:highfive:
marxist said:
Hey can you add addaway host like cloudy..just a suggestion..will try and report back..
Click to expand...
Click to collapse
I will add an adblocker to next release in v1.1
Running good, no problems here.
Can i flash this after ZVC ?
Agimax said:
I will add an adblocker to next release in v1.1
Click to expand...
Click to collapse
As you can take to unblock a SIM ?
Agimax said:
I will add an adblocker to next release in v1.1
Click to expand...
Click to collapse
I have a feature request. Advanced menu, esp since it doesn't seem to be working in Gravitybox.
zohaibkhan143 said:
Can i flash this after ZVC ?
Click to expand...
Click to collapse
Only as long as you follow the proper procedure..
http://forum.xda-developers.com/showpost.php?p=60597640&postcount=5
---------- Post added at 09:43 AM ---------- Previous post was at 09:42 AM ----------
scottdanpor said:
I have a feature request. Advanced menu, esp since it doesn't seem to be working in Gravitybox.
Click to expand...
Click to collapse
You are speaking of the Advanced Power Menu??? correct. I noticed it not being there also. I was just going to see if I can't work it in. But Agimax will probably have it done before I could shake my fist at it.
secret.animal said:
Only as long as you follow the proper procedure..
http://forum.xda-developers.com/showpost.php?p=60597640&postcount=5
---------- Post added at 09:43 AM ---------- Previous post was at 09:42 AM ----------
You are speaking of the Advanced Power Menu??? correct. I noticed it not being there also. I was just going to see if I can't work it in. But Agimax will probably have it done before I could shake my fist at it.
Click to expand...
Click to collapse
Yes advanced power menu, that's what I meant to say
secret.animal said:
Only as long as you follow the proper procedure..
http://forum.xda-developers.com/showpost.php?p=60597640&postcount=5
---------- Post added at 09:43 AM ---------- Previous post was at 09:42 AM ----------
You are speaking of the Advanced Power Menu??? correct. I noticed it not being there also. I was just going to see if I can't work it in. But Agimax will probably have it done before I could shake my fist at it.
Click to expand...
Click to collapse
Where is atock lollipop firmware? It says u must on stock LP
Sent from my LG Optimus G Pro E980

[ROM] [Sprint Hybrid I-Series] [OB7] [Kernel, Xposed, Themed] [6/10/2015]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is based off of the Hybrid X-Series 2.2 but this ROM is tweaked futher and deeper, it has Xposed, it's themed, and it's the same great ROM but improved. Currently @tx_dbs_tx doesn't have as much time to devote to updating the ROM, so I am now creating my FIRST ROM ever! I'm extremely new to this and I ask that you bare with me while I learn. Thank you and enjoy another great ROM from the Hybrid Team!
- Software version: N910PVPU1BOB7_N910PSPT1BOB7 LOLLIPOP
( 5.01)
- Rooted
- Emotion Kernel by @Pafcholini (Thread here)
- Sprint "Itson" completely removed
- Knox completely removed and also removed from About Device
- Init-d Support built-in to the ROM and Kernel
- Completely Deodexed for support to add modifications
- De-Bloated (LOTS of useless junk removed, I will be making 2 versions of this ROM when it is out of ALPHA/BETA, Full and Slim)
- Call/Message blocking enabled
- Native Call Recording Support added
- WiFi Hotspot/USB Tethering mod
- Flashlight toggle in the Quick Settings drop down
- Advanced 4-in-1 Reboot Menu
- Viper4Android (Thread here)
- Dolby Digital Plus (Credits to @hosgor45, thread here)
- Galaxy Tools (Credits to @idone, thread here)
- Xposed Framework for Samsung (Credits to the AWESOME @arter97, thread here)
- Pre-Installed Xposed Modules
- Synapse pre-configured for MAXIMUM performance
- Undervolted
- GPU Overclocked and Underclocked
- And much more that I can't remember
You must have the OB7 Lollipop firmware, no exceptions. If you don't go here and update your firmware, flash TWRP, then flash this ROM.
* Flash using the latest version of TWRP custom recovery
1. Download ROM zip file and transfer it to your phone to your desired location.
2. Reboot into TWRP.
3. Wipe Cache, Data, and System 3 times, 4 if you'd like to be safe but I do 3.
4. Click "Install" from the Home screen in TWRP.
5. Browse to where you put the ROM zip file and select it.
6. Wait for it to finish flashing, then reboot.
7. Let the ROM settle, don't use it for about 5-10 minutes.
8. Set up your phone, and enjoy the Hybrid I-Series!
MAKE SURE YOU NANDROID BEFORE YOU FLASH THIS AS IT IS A TEST VERSION​PLEASE REPORT ANY ISSUES, ALSO CHECK TO MAKE SURE SETTINGS FOR THEME AND SYNAPSE HAVE STUCK​Download - ALPHA v2​
Disclaimer: Team Hybrid, nor myself is responsible if your phone gets bricked, explodes, catches fire, starts walking, or anything that is not a normal function. Flash at YOUR own RISK.​
​
XDA:DevDB Information
Sprint Hybrid I-Series - N910PSPT1AOB7, ROM for the Sprint Samsung Galaxy Note 4
Contributors
Invisibility, tx_dbs_tx, SaintZ93, KennyG123, Pafcholini, arter97, the creators of the Xposed Modules
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Samsung OB7
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2015-06-07
Created 2015-06-08
Last Updated 2015-06-20

			
				
reserved 2
Nice to see another rom
Yea, I've been debating on learning and now that @tx_dbs_tx won't have time to do many updates to the X-Series I decided now is the best time to jump in with two feet first and see how it goes. This ROM will most likely be in ALPHA for about a week then we'll get to the BETA and hopefully by the end of June/beginning of July I can get the first STABLE version out. But we'll see how it goes. I'm still learning a lot. The ROM will be up either tonight or tomorrow. Just wanted to get the OP made up and posted so as soon as I got the ZIP ready it can be posted. Uploading is quick with my internet so it's all depending on how fast I can get this ZIP together. Bare with me!
For oe1 users I will have a custom kernel/ROM later if I have permission sorry if its not OK to mention this
pbedard said:
For oe1 users I will have a custom kernel/ROM later if I have permission sorry if its not OK to mention this
Click to expand...
Click to collapse
That's fine, I'll add it to the OP if you want to PM me. Then OE1 users will know right away and won't have to search for a fix. The kernel, not the ROM.
Please I'll like up the kernel.
Good luck you can do it.
Awesome excited for this!!!!
Sorry about the delay, having issues getting the Synapse settings to stick. Hopefully find a fix after work today.
I want, I want, I want. Hi I'm a flash-aholic and I need to flash something new.
Sent from my SM-N910P using Tapatalk
Invisibility said:
Sorry about the delay, having issues getting the Synapse settings to stick. Hopefully find a fix after work today.
Click to expand...
Click to collapse
Its cool man take your time. Excited to try it out
Looking forward to trying out your work, appreciateyour efforts!
Sent from my SM-N910P using XDA Free mobile app
Totally useless post but I just had to say that I'm looking forward to trying out this rom
If I can't get settings to stick through flashing, I'm going to release an ALPHA with instructions on setting the settings that I did.
Invisibility said:
If I can't get settings to stick through flashing, I'm going to release an ALPHA with instructions on setting the settings that I did.
Click to expand...
Click to collapse
Works for me you can always push the apk on the side?
qubanaso said:
Works for me you can always push the apk on the side?
Click to expand...
Click to collapse
The APK flashes but the settings won't carry over and I can't find the settings database file to add it to the ROM flashing process
Invisibility said:
If I can't get settings to stick through flashing, I'm going to release an ALPHA with instructions on setting the settings that I did.
Click to expand...
Click to collapse
Cant wait...
Invisibility said:
The APK flashes but the settings won't carry over and I can't find the settings database file to add it to the ROM flashing process
Click to expand...
Click to collapse
/data/data/com.af.synapse/databases
sent from nowhere
---------- Post added at 04:03 PM ---------- Previous post was at 03:47 PM ----------
liquid307 said:
/data/data/com.af.synapse/databases
sent from nowhere
Click to expand...
Click to collapse
There's also a synapse folder in root storage, but didn't see any databases in there. I'm on echo ROM using latest emotion kernel w/synapse. Updated kernel from AEL to emotion kernel and synapse is working great.
sent from nowhere

[ROM][4.4.4] MIUI V7 for [MT7-L09 and MT7-TL10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI v7 is a custom-build distribution of Android 4.4.4 KitKat that offers a simple-to-use User Interface with high levels of customization​
This ROM is Multilingual. It has done by Slyder_Mi, i just modify it to make it more "Occidental" and to correct some stuff
A Huawei Mate 7 (MT7-L09 or MT7-L10)
An Unlocked Bootloader (here or here)
Custom Recovery Installed (TWRP, CWM)
Download the ROM from the links provided and copy them to your phone's SD Card
Boot into CWM/TWRP and do a factory reset by wiping Data, Cache and Dalvik Cache
Then install the ROM
Reboot and configure your phone
Boot into CWM/TWRP and install the patch, you can make a factory reset if you want.
Enjoy the MIUI ROM!
Don't forget to read the FAQ in the Second Post
ROM Download
Download > > > Official ROM​This following patch give you access to google play and Super Su > > > Patch​
Old Version (full package)
Download > > > 5.9.19​Download > > > 5.9.12(with OTA)​Download > > > 5.9.3(with OTA)​
What is Include : (in full package)
Google Gapps
SuperSU
Viper4Android (DSP)
WSM Tools + some module
Google Keyboard
LTE Network selected by default
Baidu Chinese Keyboard Removed
Xiaomi SmartHome (chinese app) Removed
What is working :
RIL
WIFI
SDCARD
Google Play Store
Anything not listed in "Knows Bugs"
Knows Bugs :
Blutooth audio don't work
Radio don't work
Fingerprint Sensor Don't Work
NFC don't work
Video not show correctly in Mi-Video (use alternative video player apps)
It show 2.2Go (for MT7-L09) or 3.2Go (MT7-TL10), should be respectively 2Go and 3Go
Tell me what else
Screenshots :
​
Please click the Thanks button if you like this ROM​
I don't have this phone anymore (thanks to my son for breaking it) and can test any new version, don't wait for a new full package anymore, i make a small patch zip to apply into official Slyder_Mi ROM​
XDA:DevDB Information
MIUI v7, ROM for the Huawei Ascend Mate 7
Contributors
Codeworkx (CM11 Port base ROM)
Slyder_Mi (MIUI Port)
Killerdog (ROM modification)
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.10.71
Based On: CyanogenMod 11
Version Information
Status: Stable
Current Stable Version: 5.9.26
Stable Release Date: 2015-09-26
Created 2015-09-11
Last Updated 2015-09-27
FAQ
--------------------------------
Why I can't flash the OTA updates, or the rom is unusable after OTA update?
If you try to flash the OTA From Update App by MIUI, it may fail because i change some file in the system folder. You can maybe do the update but the rom may be unstable or my addition to the rom is lost. I include an App for my own OTA update package (OTA Update) in the latest build - or - You can flash the new version available in this post without any wipe until i say you need to do it.
How's the performance and battery life on this ROM?
No lags in the UI and battery life is very good.
Should i switch to 3G Network, i prefer old and slow connection for my use.
By default i enable LTE all the time (as soon you can have it near you), if you prefer to have a 3G data connection, just go to settings, network and change prefered network to 3G
!!! WARNING !!!​​​If for some reason you want to switch to 4G after, you need to select it, but if you reboot your phone it don't stay to 4G anymore
!!! WARNING !!!​
Does MIUI have Internet/WiFi calling (SIP)?
Yes it does. Go to Phone/Settings/Call settings/Internet calling and add an account.
I don't like the Google Keyboard included.
You can download an alternate keyboard from Google Play: swiftkey, swype, touchpal X ect...
The Weather app is not accurate (localisation error)
Download the Weather BZ app, it's got more features.
How can I add new mods i.e. hide the clock at the taskbar, add APM etc.?
With WSM Tools v2.3.5 include, just download some module. Instructions how to use WSM Tools see here.
I can't seem to find a setting to let me download large files over 3G/4G.
Open the Downloads app and go to Settings. Set the "Data usage" to unlimited.
I have just follow the instruction for installing, and i'm only getting "H" for my signal.
Go to dial app and type *#*#4643#*#*, go to phone information and select "LTE, GSM/WCDMA", you should be in 4G (if you provider have it) and normally it should stay after reboot in 4G
As soon as new typical questions appear, I will update this category
​
Extremely good killerdog! Kudos!!
PS: is there any way not to wipe all data, rather just do upgrade from exisiting ROM from you, previous version? Or I have to backup fully, wide, install and then restore - the long way...?
[email protected] said:
Extremely good killerdog! Kudos!!
PS: is there any way not to wipe all data, rather just do upgrade from exisiting ROM from you, previous version? Or I have to backup fully, wide, install and then restore - the long way...?
Click to expand...
Click to collapse
Because the new version is a "all in one" it will be better if you do a full wipe. So backup your data first is advise.
nice thread bro...
:good::good::good:
new link miui7 base on emui3.0 by kangvip
http://bbs.zhiyoo.com/thread-9742164-1-1.html
http://pan.baidu.com/s/1sjMdT7Z
Thanks bro, I'll give it a try.
Did you test it ?
Killerdog said:
Thanks bro, I'll give it a try.
Did you test it ?
Click to expand...
Click to collapse
yup...
more tweak...
navigation bar hide enable same as emui 3.0..
bugs...
no vibrate..
ghaf85 said:
yup...
more tweak...
navigation bar hide enable same as emui 3.0..
bugs...
no vibrate..
Click to expand...
Click to collapse
excellent, download in progress
ghaf85 said:
new link miui7 base on emui3.0 by kangvip
http://bbs.zhiyoo.com/thread-9742164-1-1.html
http://pan.baidu.com/s/1sjMdT7Z
Click to expand...
Click to collapse
Like the one by Ry09iu (this rom is based on it) it's not compatible with the MT7-L09 (single sim), i've got the same "com.android.phone" Force Close problem every 3 secondes. and after that the phone have network and lose it every 2 seconds in endless loop.
Inusable for now on MT7-L09.
I revert back to my Backup :d
Killerdog said:
Like the one by Ry09iu (this rom is based on it) it's not compatible with the MT7-L09 (single sim), i've got the same "com.android.phone" Force Close problem every 3 secondes. and after that the phone have network and lose it every 2 seconds in endless loop.
Inusable for now on MT7-L09.
I revert back to my Backup :d
Click to expand...
Click to collapse
this rom not good for me...
im revert back to your rom...
bugs..
no network indicator show
no vibrate...
it problem on me..
hope more update on your rom...
ghaf85 said:
this rom not good for me...
im revert back to your rom...
bugs..
no network indicator show
no vibrate...
it problem on me..
hope more update on your rom...
Click to expand...
Click to collapse
as soon as Slyder_Mi update his rom, i'll update mine
New version by Slyder_Mi is out, i already modify it and upload is done
thanks mate!
Killerdog said:
New version by Slyder_Mi is out, i already modify it and upload is done
Click to expand...
Click to collapse
Downloading your rom...
Thanks bro...
:good:
thanks killerdog for the update! ROM just got better! ...and it's getting better with every update! cheers!
Could someone please confirm those bugs?
- vol+ and vol- hardware buttons are not working?
- the button "back" do not work at all?
thanks!
edit: the reason is, that there is no keyboard preinstalled
just for info
error when change this build product name..
- RAM usage
- Storage Available
Code:
ro.build.product=[B]h60_l02[/B]
ro.product.model=Honor 6
ro.product.device=[B]h60_l02[/B]
Code:
ro.build.product=[B]MT7_L09[/B]
ro.product.model=Ascend Mate 7
ro.product.device=[B]MT7_L09[/B]
it show correctly when i use it as default from Slyder_MI rom...
sharing is caring...
i just made a OTA update for those come from 5.9.3 Lte modded by @Killerdog
ota_v4.4.4_MT7_L09_5.9.3_5.9.12.zip size 80mb
ghaf85 said:
i just made a OTA update for those come from 5.9.3 Lte modded by @Killerdog
ota_v4.4.4_MT7_L09_5.9.3_5.9.12.zip size 80mb
Click to expand...
Click to collapse
Excellent!! Does this OTA update contain all modifications and patches from latest killerdogs Full version?

[ROM][7.0/6.0.1][BPHJ] S7 Extreme Debloated ROM V1.4 / Beta [Nexus Conversion Pack]

Welcome to the Extreme Debloated ROM Project!
The mission of this project is to provide a ROM without extensive modifications, it provides a clean ROM for you to choose what you install on it.
It's simply De-Knoxed, rooted and obviously Debloated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You are responsible for what you do to your device so please don't complain if something breaks or goes wrong. I'm here to help though :highfive:
I will not be providing any additional mods (Themes, etc.) If you want Touchwiz Apps then this ROM isn't for you, you can use the de-bloating script instead located HERE​​Installation instructions:
Install the latest recovery (TWRP recommended)
Download the ROM.zip copy it your internal or external storage (OTG) of the device.
Flash the ROM.zip
Reboot and wait for the ROM to boot, it is advised you let the ROM rest for a few minutes after initial boot.​
Android 7.0:
Make a back-up of all of your data because internal storage will be wiped/encrypted.
Read THIS post before continuing
Click here to see some screenshots
Make sure you have the latest TWRP recovery installed:
TWRP Download
Flash the bootloaders and modems for Android N:
Bootloader
Modem
Move the ROM.zip to your external SD Card.
Go to Wipe > Format Data > Type 'yes' (You will lose your data as internal storage will also be wiped)
Install ROM.zip from external SD Card.
Reboot
ROM download:
Android N Test 1
ROM information:
Based on G930FXXU1ZPK4 , Android 7.0
Latest Magisk (V8)
Latest phh's SuperUser r266
Debloated
CSC Tweaks
Build Prop Tweaks
Updated Google Playstore/Service/Webview
ROM information Android 6.0.1:
Based on G930FXXU1BPHJ firmware
Systemless Root - SuperSU 2.78
BusyBox 1.24.2
Security Patch Level: 1st September 2016
Integrated updated Google Play Store 6.9.20.G
Integrated updated Google Web-view v(53.0.2785.97)
Integrated updated Google Play Services v(9.6.78)
Build.prop tweaks
Extended Reboot Menu
All Apps Multiwindow
Multi-instance (Open the same app twice in multiwindow)
6 Quick Settings Toggles
No grey status bar during powersaving mode
SD Card Notification Removed
15 Settings Favorites
Ability to remove non-removable notifications
Touch key light duration
Outdoor Mode
0.25x Animations in developer options
CSC tweaks
De-KNOXed
Most Touchwiz Apps removed
ZipAlinged
Updated Samsung Apps
Stock kernel
Downloads:
TWRP Recovery
G930F Modem
G930F Bootloader
No mirrors are to be made, if the link is broken you can ask in the thread!
If you enjoy my work and would like to donate:
Xposed Framework:
Xposed Framework Download the attachment and flash the file.
Download the Xposed Installer APK from this thread​
Credits:
Chainfire for SuperSU
Wanam and Rovo89 for Xposed Framework
Superr for the kitchen
XDA:DevDB Information
Extreme Debloated ROM, ROM for the Samsung Galaxy S7
Contributors
Battlehero
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: G930FXXU1BPHJ
Version Information
Status: Testing
Current Stable Version: V1.4
Stable Release Date: 2016-09-10
Current Beta Version: Test 1
Beta Release Date: 2016-11-10
Created 2016-07-21
Last Updated 2016-11-10
Mods
Extras
5 quick-settings toggle SystemUI
Samsung Apps (Bloatware) and potentially more
Battlehero said:
C5 Clock
Preview:
C5 Smart Manager
Preview:
Galaxy Labs - Games Launcher and Optimiser
Extra Mods
App Locker
Smart Block
On, Off Toggle Labels
Air Messages
Whitepages
Dolby Sound Modhttps://www.androidfilehost.com/?fid=24591000424948861
Viper4Androidhttps://www.androidfilehost.com/?fid=24591000424961994
Click to expand...
Click to collapse
Battlehero said:
Nexus Conversion Pack​Installation instructions:
Perform the necessary wipes (/System /Data /Cache)
Flash a ROM of your choice
Flash the Nexus Conversion Pack
Once setup is complete, make sure to go to Settings > Applications > Default Applications > Calling App and select 'Telephone'
Download
Some screenshots:
Click to expand...
Click to collapse
Bugs / Known issues
If you want to use NFC flash this
Reserved
Seems jnteresting. Wish it had app lock though!
Davcoss said:
Seems jnteresting. Wish it had app lock though!
Click to expand...
Click to collapse
Flash the extra mods in the second post, it has it included.
BL and CP in Odin >>>> md5 error! Binary is invalid
amtomio2004 said:
BL and CP in Odin >>>> md5 error! Binary is invalid
Click to expand...
Click to collapse
Re-download them.
New mod
Nexus Conversion Mod has been added to the second post
Hello,
Very , very , very good ROM !!! :good:
I have just one questions , the phone gets very hot, is there any posibility to stop this ?
Mention that moment until I used stock rom , The phone does not heated, after I install this ROM began heated .
Request :
Can u provide me a zip with original fonts from S7 ?
Can u add in this rom GraceUI Apps and UI ?
Like ( see screenshot )
Good job with this ROM ! and keep it up
Thanks
nice rom all working smooth ty for your hard work!
How have S Voice ?
Is there a way to restore 5 toggles? I don't like 6 toggles cause it looks messed up
Also it says my device doesn't support vpn when i use vpn app
the 6 toggles is messed up
please fix
---------- Post added at 12:12 AM ---------- Previous post was at 12:02 AM ----------
weedeater84 said:
the 6 toggles is messed up
please fix
Click to expand...
Click to collapse
have no root aswell
mk4y said:
nice rom all working smooth ty for your hard work!
Click to expand...
Click to collapse
Glad you are enjoying it.
Romsss92 said:
How have S Voice ?
Click to expand...
Click to collapse
Check 'Samsung Apps' in the second post.
Davcoss said:
Is there a way to restore 5 toggles? I don't like 6 toggles cause it looks messed up
Also it says my device doesn't support vpn when i use vpn app
Click to expand...
Click to collapse
Check 'Samsung Apps' in the second post.
weedeater84 said:
the 6 toggles is messed up
please fix
have no root aswell
Click to expand...
Click to collapse
The reason you don't have root is probably because you wiped data after flashing the ROM, this ROM contains systemless root.
You have two solutions, either flash SuperSU or flash the ROM.zip again.
xtmzone said:
Hello,
Very , very , very good ROM !!! :good:
I have just one questions , the phone gets very hot, is there any posibility to stop this ?
Mention that moment until I used stock rom , The phone does not heated, after I install this ROM began heated .
Request :
Can u provide me a zip with original fonts from S7 ?
Can u add in this rom GraceUI Apps and UI ?
Like ( see screenshot )
Good job with this ROM ! and keep it up
Thanks
Click to expand...
Click to collapse
The phone should cool off after it rests, due to the fact that the initial boot will be hot due to the fact that this ROM is DeOdexed and stock ROM is Odexed. I would recommend letting the ROM settle in for a day or two.
I'll look into the GraceUX but no ETAs as it's dependent on whether I have time to look into it.
I appreciate your feedback and am glad you are enjoying the ROM so far.
I flashed VPN and 5_QS_systemui and both didn't work lol :/
Davcoss said:
I flashed VPN and 5_QS_systemui and both didn't work lol :/
Click to expand...
Click to collapse
Made a mistake in the updater script
Battlehero said:
Made a mistake in the updater script
Click to expand...
Click to collapse
Aha waiting for new upload
This rom is awesome though!
Davcoss said:
Aha waiting for new upload
This rom is awesome though!
Click to expand...
Click to collapse
Re-download the files, fixed the issue; they should work now.

[ROM][7.0][XXU3BQI8][11/10] Prism™ Barebone V2 [J710x][582MB][Discontinued]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
-Based on J710FXXU3BQI8
-Security patch 2017-8-01
-Fully Deodexed
-Highly debloated, 560MB Only!!!
-Knox stuff removed
-Disabled Encryption & DM Verify for system
-Disabled Knox related stuff in build.prop
-Not Rooted, flash your desired root
ChangeLogs:
V2.0
-Added couple of apps back
-Fixed some bugs "hopefully"
-Added back some data/volte apks
-Updated ROM base to XXU3BQI8
V1.0
-Initial Release
Installation instructions:
-Download the ROM
-Wipe Data ,Cache Partitions
-Flash the ROM
-Flash ROOT ZIP, SuperSu or Magisk
Download:
V2.0
Drive
V1.0
Drive
Mega
Screenshots:
Note for Indian users: i dont know if volte will work or not, but files are already in the ROM
Another Note for users with other models, J710M/FN or any other model with the same chip, please buckup everything before trying to flash the ROM, i tried it on SM-J710FQ everything works fine so far
Enjoy :victory:.....
XDA:DevDB Information
Prism Barebone, ROM for the Samsung Galaxy J7
Contributors
AL_IRAQI
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: XXU3BQI8
Based On: Stock TW
Version Information
Status: No Longer Updated
Current Stable Version: V1.0
Stable Release Date: 2017-11-10
Created 2017-09-10
Last Updated 2017-12-22
Removed Apps
Removed Apps ZIP's:
Drive
Mega
Download other Samsung apps from their store or from the playstore here or apkmirror or sammobile
Reserved
Stock Images
Download Folder
Drive
Mega
Flash it with Odin
Note: its for SM-J710F model only, double & triple check your model before flashing, im not responsible for possible brick that happens when you flash it on the wrong model
Notes & Fixes:
Notes:
- Do not ask for AROMA
- Do not qoute OP
Fixes:
-GPS fix in attachments
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
maurce249 said:
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
Click to expand...
Click to collapse
Mods like what ?
Always wanted a ROM this debloated!!!! Awesome
awesome
great work again thanks ?
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
parthopagol said:
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
Click to expand...
Click to collapse
Try out CSC Expert
AL_IRAQI said:
Mods like what ? [/QU
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Great guidelines sir..excellent
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
maurce249 said:
AL_IRAQI said:
Mods like what ?
Click to expand...
Click to collapse
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Ill take a look, but chill with dem caps
parthopagol said:
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
Click to expand...
Click to collapse
Hmm, flash SimToolKit from removed zips
AL_IRAQI said:
Ill take a look, but chill with dem caps
Hmm, flash SimToolKit from removed zips
Click to expand...
Click to collapse
ok
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
I dont know but try flashing SamsungAntiRootRemoval
https://build.nethunter.com/samsung-tools/samsung-antiroot-removal/
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
Hey, System is mounted as read only by default, that is why you can remove or move stuff in there sometimes, try removing stuff from twrp
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
You have to disable boot verification & device encryption after flashing root, use this zip
you have to wipe your storage from twrp also after flashing this zip
trouble sending text messages
Message application doesn't work correctly
Can't send text messages. Sorry for my bad english >.<
youtube watch?v=7JWgOaR3c9c

Categories

Resources