Related
Hello XDA, I have been working on an Aosp-ish nougat rom for our beloved trltetmo. It has nearly no features yet, since it's an AOSP ROM. I'm a Nexus dev, and just recently started working on the trltetmo because I bought one. I had a marshmallow rom and kernel(but tend not to release stuff to anyone to avoid drama and the eta requests).
Downloads: https://www.androidfilehost.com/?a=show&w=files&flid=111459
I have uploaded my work to GitHub: http://github.com/TrlteNougat
For now until I get my gpu back, you have to flash this kernel for MM bootloader support: https://www.androidfilehost.com/?fid=529152257862667083
Known issues:
- Camera is wonky. It's going to be difficult to fix
- The phone acts like it's a dual sim phone, no usability is sacrificed, it just shows two APN settings and the carrier on Dialer
Features:
None yet, it's AOSPish
What is being worked on:
Bluetooth
Call audio (mixer_path issues)
The kernel source is up: https://github.com/TrlteNougat/kernel_samsung_trlte/commits/n7.0
Manifest located here: https://github.com/TrlteNougat/manifest
Nice! Subscribed.
Test build
https://www.androidfilehost.com/?fid=24723757092306996
This one doesn't reboot randomly. Still has ril and Bluetooth errors. Sound doesn't work. Camera does.
I m not dev. But great to see work on 7 ...cheers to all devs...hoping for a stable one soon thx again
I'm keeping my eye on this thank you
Sent from my SM-N910T using Tapatalk
Ril is now partially working. I can send and receive texts. Calls cause a soft reboot, but shouldn't be hard to fix. Still no data connection yet, but that'll be fixed soon enough. Wifi connects but doesn't access internet for some reason. I haven't looked into that any.
Because why not
improper bootloader and in some cases modem can cause Wi-Fi to behave similar to how you have described. I'm not a TMO user but I think there should be several versions newer than OK2
if you have any desire to return to 5.1.1 or keep the option open to do it in the future, you may want to steer clear of the newest 2 or so bootloaders as they may prohibit further downgrading. if TMO is anything like Sprint, anything PE2 and older should still permit downgrades. newer versions I have not tested or seen any info on the topic.
[QRCODE][/QRCODE]ok I did a quick check and you are in fact on a 5.1.1 modem. I don't know if you've updated your bootloader but I get the feeling you would know if you have or not lol
all TMO MM firmware is newer than the Sprint firmwares (PB5, PC1, PD1, PE1, PE2) that I know to not prohibit downgrades, so you're on your own there.
if you believe the test builds to be compatible with the Sprint model, I'd be happy to help test as time allows for it
Sterist said:
[QRCODE][/QRCODE]ok I did a quick check and you are in fact on a 5.1.1 modem. I don't know if you've updated your bootloader but I get the feeling you would know if you have or not lol
all TMO MM firmware is newer than the Sprint firmwares (PB5, PC1, PD1, PE1, PE2) that I know to not prohibit downgrades, so you're on your own there.
if you believe the test builds to be compatible with the Sprint model, I'd be happy to help test as time allows for it
Click to expand...
Click to collapse
910T can be downgradable to DOK2 but not below that (unless you use work around and flash 910T2 firmware, which will allow you to go to 4.4.4 BL , and still can come back to latest) but thats a different story, regardless of that , however , you can anytime switch among DOK2 to PE3 to PG2 in any order. I think android N for 910T should be tested on EPG2 and not on DOK2 , atleast should give it a try on EPG2. I think the dev @USA-RedDragon , already must have tried all bootloaders and basebands , i m just replying to above posts.
Manan79 said:
910T can be downgradable to DOK2 but not below that (unless you use work around and flash 910T2 firmware, which will allow you to go to 4.4.4 BL , and still can come back to latest) but thats a different story, regardless of that , however , you can anytime switch among DOK2 to PE3 to PG2 in any order. I think android N for 910T should be tested on EPG2 and not on DOK2 , atleast should give it a try on EPG2. I think the dev @USA-RedDragon , already must have tried all bootloaders and basebands , i m just replying to above posts.
Click to expand...
Click to collapse
I tried EPE3 on mm but got too frustrated with the issues. So I've been weary to try it again. But you do have a point that I should try with newer bl/modem combos. I've got a mm rom compatible with epe3, so I might as well flash that. The Odin files are on my desktop staring me down
Side note, the logs point to something bring wrong wkth the code and not a bl/modem -> rom compatibility. But I could be wrong. Never hurts to try
USA-RedDragon said:
I tried EPE3 on mm but got too frustrated with the issues. So I've been weary to try it again. But you do have a point that I should try with newer bl/modem combos. I've got a mm rom compatible with epe3, so I might as well flash that. The Odin files are on my desktop staring me down
Click to expand...
Click to collapse
to make it easier ,why dont you just flash EPG2 BL and CP using odin (as opposed to entire MM rom) .and see if it fixes any of the issues with current N build.
Manan79 said:
to make it easier ,why dont you just flash EPG2 BL and CP using odin (as opposed to entire MM rom) .and see if it fixes any of the issues with current N build.
Click to expand...
Click to collapse
I'll do that. Progress is still ongoing with all this. But this week I've been busy with an Android Dev's biggest bane: a full-time job ?
USA-RedDragon said:
Side note, the logs point to something bring wrong wkth the code and not a bl/modem -> rom compatibility. But I could be wrong. Never hurts to try
Click to expand...
Click to collapse
sure ,i do understand that I do want to ask , how about xda devs who work for CM14 unofficial? i dont see much active devs on this thread, i would have thought all the note 4 devs who worked on CM13 unofficial would jump on this to help you out
Manan79 said:
sure ,i do understand that I do want to ask , how about xda devs who work for CM14 unofficial? i dont see much active devs on this thread, i would have thought all the note 4 devs who worked on CM13 unofficial would jump on this to help you out
Click to expand...
Click to collapse
Eh. I have other devs at my disposal. Most don't use XDA, and I tend to not either, but this(like any major version bump on a Samsung) is a big endeavor, so I made the thread for people to jump in if they wanted
USA-RedDragon said:
Eh. I have other devs at my disposal. Most don't use XDA, and I tend to not either, but this(like any major version bump on a Samsung) is a big endeavor, so I made the thread for people to jump in if they wanted
Click to expand...
Click to collapse
got it thx, let me know if you want me to test 910T builds, however i do need sim to be working for incoming/outgoing calls , cant live without that rest all i can test.
it was funny how I realized mine was the new version now
I made this thread here so you guys can discuss, this is for information to others who have gotten the new elephone
1) How do we get root ?
No, there isnt any proper recovery last @Emileh ported it did not work very well you are able to flash it the recovery but you are unable to boot back into the system it just stuck at the elephone logo.
2) as of now we only have one rom that has been up here and running K06TE-A.A.vR14.E1.160707 (2016 Version)
K05TS-A.A.vR1E.E2.160217 (2015 Version)
3) cosmetic mixed up (happens alot on chinese phone)
my front is the old 2015 version cover but my back is the new fingerprint cover (possible you can confirm with that is the new elephone you have if you are not sure.
4) so no root and no cyanogenmod and no recovery ?
as of now Im not sure about root, cause I did tried to flash recovery from @Emileh but I could not boot back to android os, so we cant flash supersu,
kingroot and others dont work !
also there some memory layout changed, so it will render the android 5.1 roms useless, please dont try unless you know what you are doing and know how to recover from mediatek usb port
5) will CyanogenMod 13 work ?
to be honest we need a fully working recovery.
maybe there can explain and clear anything more that I left out, I have just gotten the phone
@skeleton1911 @BlueFlame4 @Emileh @Deepflex
somehelp would be nice. thanks would be nice to get cm13 for both the 2015 and 2016 working
Hey,
well the 2015 and 2016 versions are basically two different devices - despite having the same name they share very little. A unified CM 13 build is thus not only difficult to establish but I would even say that it makes things more complex than developing two single versions. That said, CM 13 for the 2016 should be rather easy to bring up because it ships with 6.0. Basically you could take Deepflex's P9000 tree, change it according to the 2016_P8000 and boom - should work. With that you can then of course also compile a working recovery to achieve root That's the theory at least
Is that so but we have yet to achive root and figure out what is the internal changes between those two? Maybe @Deepflux can lend a helping hand in this wish you could help out @BlueFlame4, cause I finally had the money to get this phone possible if you could look into the recovery issue on why it does not boot after flashing it aka bootloop at elephone logo
** Attempted to Port and it does not work. did repack twice.
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Emileh said:
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Click to expand...
Click to collapse
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Zenns said:
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Click to expand...
Click to collapse
I was talking about this. You have to adapt it to the P8000 and have to use a 3.18 kernel (+ M blobs) though.
there isnt any 3.18 kernel that was released right ? m blobs can be extracted question is why won't your cm13.1 work on the new elephone ? memory changes ? it is still same soc right or there is something different quite confused.
Bump
Would like to use a clean version of Android instead of the EMUI version that is loaded on all their phones.
Seeing how these phones are identical, figured what would work for one would work with the other.
Thanks for giving me any insight.
Coming from the Galaxy Note 4 - hoping I'm not making a mistake with this phone that is enroute.
+1
Nothing happening on this phone I guess.
Jimi Mack said:
Nothing happening on this phone I guess.
Click to expand...
Click to collapse
Guess you haven't bothered looking at the ROMs and development section. While alot of ROMs are not what I would deem "daily material", their is working going on to get ROMs on this device.
Sent from my BND-L24 using Tapatalk
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Learning about this phone, why the A only roms?
AsItLies said:
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
Click to expand...
Click to collapse
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
I don't mind emui except that the power-saver regularly kills tasker, ad-blocking vpns, etc. I've tried everything to exempt them from power saving but no go. The battery life is outstanding though (I usually only lose 15% after a full day's usage), so for average users it's a bonus.
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Hey thanks for pointing me in the right direction. I have not installed a custom ROM in a long time.
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
JakeBuck said:
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
Click to expand...
Click to collapse
Nothing terribly serious. I didn't use it for long, but the camera option for selfie shutter 'palm to camera' didn't work. Also the recently taken shots didn't show in the bottom gallery (I read this is fixed now). And the navigation arrows at the bottom seemed to not be persistent somehow (after a reboot this was okay).
It's easy to go back to stock, except if you haven't backed everything up, have to reconfigure, add / subtract apps etc.
I'd suggest searching for the openKirin website, they seem to be doing the most development. Also follow their directions, they worked for me and pretty easy.
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Scythe69 said:
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Click to expand...
Click to collapse
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
zackzuse said:
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
Click to expand...
Click to collapse
No, you don't need a custom bootloader.
You only need unlocked bootloader and unlocked frp.
TWRP is not supported on OpenKirin ROMs (especially on 7x twrp won't work).
You just need to flash the .img file through bootloader and then reboot to recovery and do a factory data reset.
Can anyone give me some advice: I have the Mate SE, currently on EMUI 8.0.0.332 (security update available but not installed), with TWRP and Magisk. I would love to install a custom ROM, but the OpenKirin site says TWRP isn't supported. Can I still install one of those builds and just expect no support if something goes wrong, or should I find some way to return to full stock before flashing? And if I need stock recovery, where can I find a download for it? I haven't had any luck on searching here yet.
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
youssef alonso said:
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
Click to expand...
Click to collapse
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
awlonsky said:
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
Click to expand...
Click to collapse
Pretty much any GSI works so long as you have updated to EMUI 8 sometime in the past.
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Mkami said:
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Click to expand...
Click to collapse
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
veekay said:
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
Click to expand...
Click to collapse
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
veekay said:
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Click to expand...
Click to collapse
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
daitalos said:
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
Click to expand...
Click to collapse
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Mkami said:
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
Click to expand...
Click to collapse
Have you tried just reloading the latest stock firmware from scratch?
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
veekay said:
Have you tried just reloading the latest stock firmware from scratch?
Click to expand...
Click to collapse
Would that work? If I did that I would still be able to download and install TWRP and have a root? Because of it being PIE
UndeadAnarchy said:
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
Click to expand...
Click to collapse
I am going to do more research on these projects because I really wish there was more ROMs its quite an amazing tablet but the potential with the stock ROM lacks a lot
Mkami said:
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Click to expand...
Click to collapse
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
daitalos said:
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
Click to expand...
Click to collapse
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
Sorry,but I don't understand what do you mean " without stock rom and only twrp"...
you can install a Gsi rom, with two ways
Via TWRP, or Via Fastboot : https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ (Tab S4 is a-only arm64)
for any other question, it is better to ask in the thread : https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
(read carefully in OP & you can post,every single question there for your device,and you will get certainly help from the developer or from any other user..)
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
You are going to have to just wipe it and start over from square one, unless you made a TWRP backup before starting all of this.
Download and flash the latest stock rom from recovery and then you can load twrp again.
I was looking at the possibility of using GSI's on some devices, and while they can offer new life to older devices, they're not entirely stable all the time unless you're willing to make your own changes. I know Lineage has made some excellent progress, but it's not fullproof yet and I wouldn't try it unless you're willing to not use your device as a daily use device.
I had an extra T-Mobile Revvlry which is basically a rebranded Moto g7 Play that I installed the Lineage GSI image and it works fairly well. However, this is more the exception to the rule and Moto devices, I feel, are far simpler in design vs certain Samsung devices. It also had a ton of trial and error involved for me to get it up and running properly.
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
slipnslider said:
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
Click to expand...
Click to collapse
Read very carefully without rush ! for " WETA Kernel + Encryption disabler " etc
especially, read the user comments carefully, and ask on the thread for any questions you have..
https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278 (Pie version)
https://forum.xda-developers.com/showpost.php?p=79483624&postcount=2
https://forum.xda-developers.com/galaxy-tab-s4/how-to/guide-sm-t83x-twrp-magisk-t4059227
( Newest Odin v3.14.4 is there : https://dl2018.sammobile.com/Odin3-v3.14.4.zip )
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
slipnslider said:
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
Click to expand...
Click to collapse
samsung,maybe at the end of july to give the upgrade to android 10....it is very likely to happen I think
yes,all Gsi Roms still have various problems unfortunately...
my opinion is: stay to stock rom for now....you can "uninstall" many applications if you want & without root, via "samsung package disabler"(paid) from playstore, or with this way:
https://beebom.com/how-remove-bloatware-android-without-root/
also,you can Install "NiceLock Downloader Companion App" ,to add some features on your device : https://forum.xda-developers.com/galaxy-note-9/themes/nicelock-module-download-links-module-t3923844
with this way I operate my device until now..
Hi guys!!!
Like the title said i have and Redmi Note 8 PRO with android 10 and i want root it....
I have tryed many guides without success so i have downgrade my phone to android 9....
Its possible to root in both android 9 and android 10???
If yes can you give me both guides???
also witch is better to have adroid 9 or 10????
please help me is over 2 weeks im try without success...
SonXiaomi89 said:
hi ! You can root redmi note 8 pro Magisk in ROM EU !
Click to expand...
Click to collapse
U tell me something that i already know....
My question was how i can??? i looking for a guide.
roberto_1986 said:
Hi guys!!!
Like the title said i have and Redmi Note 8 PRO with android 10 and i want root it....
I have tryed many guides without success so i have downgrade my phone to android 9....
Its possible to root in both android 9 and android 10???
If yes can you give me both guides???
also witch is better to have adroid 9 or 10????
please help me is over 2 weeks im try without success...
Click to expand...
Click to collapse
Greetings @roberto_1986,
Your choice between A9 and A10 will summarize easily. Do you need one of the new features provided on A10 which was not present on A9 version? If you do not know or if you are not sure, then you dont need A10, stick to A9 for now. Less bugs, better performance and battery life. OS is more mature.
Now regarding rooting, on A9 Rom nothing as easy as pressing the root button under the LR TWRP (1104 version for A9 1210 for A10), then pressing the Closing AVB 2.0 button and you are done. From there you can update to latest stable version within the OS (do not use the beta ones, no point using those and it did not work for me). Works like a charm. I am on MIUI 11.0.2.0 (A9) EEA and never had any kind of issues using this method a few times. I never tried the A10 version of the LR TWRP so I have no idea if they offer the same option for rooting on A10 or not.
You can also unroot from that same LR TWRP in case that would be required at some point.
Hope this helps.
Muad.Dib said:
Greetings @roberto_1986,
Your choice between A9 and A10 will summarize easily. Do you need one of the new features provided on A10 which was not present on A9 version? If you do not know or if you are not sure, then you dont need A10, stick to A9 for now. Less bugs, better performance and battery life. OS is more mature.
Now regarding rooting, on A9 Rom nothing as easy as pressing the root button under the LR TWRP (1104 version for A9 1210 for A10), then pressing the Closing AVB 2.0 button and you are done. From there you can update to latest stable version within the OS (do not use the beta ones, no point using those and it did not work for me). Works like a charm. I am on MIUI 11.0.2.0 (A9) EEA and never had any kind of issues using this method a few times. I never tried the A10 version of the LR TWRP so I have no idea if they offer the same option for rooting on A10 or not.
You can also unroot from that same LR TWRP in case that would be required at some point.
Hope this helps.
Click to expand...
Click to collapse
Ty for your answer!
TWRP TWRP 3.4.0-0 its going to work on A10?
also can u kink to me the turorial for root both android version??? ty so much.
roberto_1986 said:
Ty for your answer!
TWRP TWRP 3.4.0-0 its going to work on A10?
also can u kink to me the turorial for root both android version??? ty so much.
Click to expand...
Click to collapse
I am unsure if OFFICIAL TWRP 3.4.0 is meant for A10, I suggest you to read their its thread to see if people are using it on A10 or not. Personally I installed it yesterday on A9 and it saved my day restoring a backup made with some other UNOFFICIAL TWRP.
The UNOFFICIAL LR TWRP (chinese/english) which was released last year is the version which includes the rooting ability for A9 (and maybe for A10 too). OFFICIAL TWRP does not have such additional goodies since it is the OFFICIAL branch of TWRP.
You can check this guide using the UNOFFICIAL LR TWRP to root device, ALL steps you need to take to root your device properly are explained here. That's for A9, not A10.
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
Note a quick search within forums would have probably leaded you there, try it next time, that's helpful feature of forums
As for the UNOFFICIAL LR TWRP (by wzsx150) thread for P and Q you can find it there:
[RECOVERY][begonia][UNOFFICIAL by wzsx150][P/Q]TWRP recovery for Redmi Note 8 Pro
Rooting A9 from the LR TWRP 1104 is guaranteed to work. That's what I used myself. As for A10 (Q) I have no idea, check/ask the thread.
Let us know how it turns out and you did to make it work.
Good Luck!
Muad.Dib said:
I am unsure if OFFICIAL TWRP 3.4.0 is meant for A10, I suggest you to read their its thread to see if people are using it on A10 or not. Personally I installed it yesterday on A9 and it saved my day restoring a backup made with some other UNOFFICIAL TWRP.
The UNOFFICIAL LR TWRP (chinese/english) which was released last year is the version which includes the rooting ability for A9 (and maybe for A10 too). OFFICIAL TWRP does not have such additional goodies since it is the OFFICIAL branch of TWRP.
You can check this guide using the UNOFFICIAL LR TWRP to root device, ALL steps you need to take to root your device properly are explained here. That's for A9, not A10.
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
Note a quick search within forums would have probably leaded you there, try it next time, that's helpful feature of forums
As for the UNOFFICIAL LR TWRP (by wzsx150) thread for P and Q you can find it there:
[RECOVERY][begonia][UNOFFICIAL by wzsx150][P/Q]TWRP recovery for Redmi Note 8 Pro
Rooting A9 from the LR TWRP 1104 is guaranteed to work. That's what I used myself. As for A10 (Q) I have no idea, check/ask the thread.
Let us know how it turns out and you did to make it work.
Good Luck!
Click to expand...
Click to collapse
ty so much!
im tryed to root A10 and got bootloop again.....im broke so i think i will go back to A9 like u said!
i will try and let u know.
Muad.Dib said:
I am unsure if OFFICIAL TWRP 3.4.0 is meant for A10, I suggest you to read their its thread to see if people are using it on A10 or not. Personally I installed it yesterday on A9 and it saved my day restoring a backup made with some other UNOFFICIAL TWRP.
The UNOFFICIAL LR TWRP (chinese/english) which was released last year is the version which includes the rooting ability for A9 (and maybe for A10 too). OFFICIAL TWRP does not have such additional goodies since it is the OFFICIAL branch of TWRP.
You can check this guide using the UNOFFICIAL LR TWRP to root device, ALL steps you need to take to root your device properly are explained here. That's for A9, not A10.
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
Note a quick search within forums would have probably leaded you there, try it next time, that's helpful feature of forums
As for the UNOFFICIAL LR TWRP (by wzsx150) thread for P and Q you can find it there:
[RECOVERY][begonia][UNOFFICIAL by wzsx150][P/Q]TWRP recovery for Redmi Note 8 Pro
Rooting A9 from the LR TWRP 1104 is guaranteed to work. That's what I used myself. As for A10 (Q) I have no idea, check/ask the thread.
Let us know how it turns out and you did to make it work.
Good Luck!
Click to expand...
Click to collapse
Finaly i have downgraded to android 9....
now im little bit confused.....
i can install directly the last twrp for my phone from this site???----> https://unofficialtwrp.com/twrp-3-3-1-root-redmi-note-8-pro-begonia/
usualy im never install something that are upload from someone that idk who is...
im waiting your answer then i will flash it ty again for your support.
roberto_1986 said:
Finaly i have downgraded to android 9....
now im little bit confused.....
i can install directly the last twrp for my phone from this site???----> https://unofficialtwrp.com/twrp-3-3-1-root-redmi-note-8-pro-begonia/
usualy im never install something that are upload from someone that idk who is...
im waiting your answer then i will flash it ty again for your support.
Click to expand...
Click to collapse
That's very wise not to install stuff you find from internet from unknown sources.
Not sure how you found that website, but I never heard of it or even seen it for the matter. I would not consider it safe myself.
I used to be able to download stuff from MiFirm which *looked* more legit but who knows.
You can find the required files from the xda threads I posted above, it may come from individuals, but I do consider it safer somehow because we have feedback from xda users. Back then when we installed those unofficial version there were not official support of any kind anyway so we kind of had to be 'advanturous'. I dont even remember from where I got mine myself.
Best I can do for you is to provide you with the checksums of the file I did use to root my A9 and reflashed not so long ago.
Code:
$ md5sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
e41bba28984f14ea56da98448cd2c17d *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
$ sha256sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
8f203aec69f1ed021badac0f94d1906fcf0530f0e41beddcbc49652705c8731b *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
This way whatever source you are getting the file from you'll be able to check it against my sums which will guarantee you got the same version I did use. However I cannot guarantee they are 'legit'.
Before you proceed any further, I want to stress you never told me the flavor of the phone you own. Mine is Global EU phone flavor running an original stock MIUI.11.0.2.0_A9_PGGEUXM. If own a Chinese flavor (ordered on Alibaba, Aliexpress etc etc) you need to be extra cautious for example as they tend to brick more from what I read.
I also remind you need an unlocked bootloader and I strongly recommend you to apply the Anti-Brick solution as described in my previous post. If you restored to stock image using MiFlash or SP Flash Tools it is very likely you need to reapply those even if you did it before. Best to apply them twice than none.
Hope this helps.
Muad.Dib said:
That's very wise not to install stuff you find from internet from unknown sources.
Not sure how you found that website, but I never heard of it or even seen it for the matter. I would not consider it safe myself.
I used to be able to download stuff from MiFirm which *looked* more legit but who knows.
You can find the required files from the xda threads I posted above, it may come from individuals, but I do consider it safer somehow because we have feedback from xda users. Back then when we installed those unofficial version there were not official support of any kind anyway so we kind of had to be 'advanturous'. I dont even remember from where I got mine myself.
Best I can do for you is to provide you with the checksums of the file I did use to root my A9 and reflashed not so long ago.
Code:
$ md5sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
e41bba28984f14ea56da98448cd2c17d *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
$ sha256sum recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
8f203aec69f1ed021badac0f94d1906fcf0530f0e41beddcbc49652705c8731b *recovery-TWRP-3.3.1-1104-REDMI_NOTE8PRO-CN-wzsx150.img
This way whatever source you are getting the file from you'll be able to check it against my sums which will guarantee you got the same version I did use. However I cannot guarantee they are 'legit'.
Before you proceed any further, I want to stress you never told me the flavor of the phone you own. Mine is Global EU phone flavor running an original stock MIUI.11.0.2.0_A9_PGGEUXM. If own a Chinese flavor (ordered on Alibaba, Aliexpress etc etc) you need to be extra cautious for example as they tend to brick more from what I read.
I also remind you need an unlocked bootloader and I strongly recommend you to apply the Anti-Brick solution as described in my previous post. If you restored to stock image using MiFlash or SP Flash Tools it is very likely you need to reapply those even if you did it before. Best to apply them twice than none.
Hope this helps.
Click to expand...
Click to collapse
mine is EEA so eurpean version!
also talk me about "Anti-Brick solution" ty
ans i read that the thread u link to me was copy/paste from another thread that is only for china version???
is working for EU too?
also when u bootloop is brick or something like that?
Muad.Dib said:
I also remind you need an unlocked bootloader and I strongly recommend you to apply the Anti-Brick solution as described in my previous post.
Hope this helps.
Click to expand...
Click to collapse
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
coolvipcandy said:
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
Click to expand...
Click to collapse
how do u brick redmi note 8 pro????
coolvipcandy said:
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
Click to expand...
Click to collapse
Ty i have installed TWR and now i am here ---> - then go to system_root > system and delete "recovery-from-boot.p"
but i cannot find this file why???
well nvm finaly i have rooted my phone ty so much!!!
roberto_1986 said:
mine is EEA so eurpean version!
also talk me about "Anti-Brick solution" ty
Click to expand...
Click to collapse
The Megathread is pretty much self explanatory for the Anti-Brick method, I cannot explain it any better than how it is explain there. Please refer to the link given in one of my previous posts and just apply the first part with flashing preloader.bin and lk.img as explained.
It will basically provide you with a safety belt in case you do anything wrong with your phone on A9 resulting in bricking the device, bootloop or whatever, so you can Flash stock back on using MiFlash / SP Flash Tool without having to need an authorized account.
roberto_1986 said:
Ty i have installed TWR and now i am here ---> - then go to system_root > system and delete "recovery-from-boot.p"
but i cannot find this file why???
Click to expand...
Click to collapse
This file might not be there, it is a file you have to delete to prevent OS to restore Mi Recovery 3 over your TWRP at reboot (making impossible to have TWRP stick on the phone).
In order to see that file you first need to mount 'system' in the options but as I said it is not always there.
roberto_1986 said:
well nvm finaly i have rooted my phone ty so much!!!
Click to expand...
Click to collapse
Glad I could help! Sharing the bits of knowledge we have here and here is the best thing in the world, bits of knowledge are only worth something if shared with someone else yeah!
Now that you are rooted dont mess up with your phone eh!
---------- Post added at 10:47 ---------- Previous post was at 10:22 ----------
coolvipcandy said:
Kindly elaborate pls,, Anti-brick solution,,
I'm on stock unrooted but with unlocked bootloader Indian version running 11.0.4.(QGGINMX) - A10.
I Hard bricked my last note 8 pro trying to root n luckily the Mi Service provided me brand new device but finishing warranty on new device,,, so I didn't risk rooting on new device for last 6-7 or so months though I unlocked bootloader as of then ,, (just in case ), now is there any safe method on A10,, link plz
Click to expand...
Click to collapse
As I said earlier, I have no experience in A10 (Q) problems as I am not willing to jump in there staying on A9 (P).
A10 benefits is not worth the risks to me. The Anti-brick method is well explained in the Megathread I posted the link few posts earlier, however, it's for A9 only not A10.
Looking at the lists of bugs still present on A10, I really see no point running A10 atm. But well anyone does what pleases him/her he he
Good Luck!
Muad.Dib said:
The Megathread is pretty much self explanatory for the Anti-Brick method, I cannot explain it any better than how it is explain there. Please refer to the link given in one of my previous posts and just apply the first part with flashing preloader.bin and lk.img as explained.
It will basically provide you with a safety belt in case you do anything wrong with your phone on A9 resulting in bricking the device, bootloop or whatever, so you can Flash stock back on using MiFlash / SP Flash Tool without having to need an authorized account.
This file might not be there, it is a file you have to delete to prevent OS to restore Mi Recovery 3 over your TWRP at reboot (making impossible to have TWRP stick on the phone).
In order to see that file you first need to mount 'system' in the options but as I said it is not always there.
Glad I could help! Sharing the bits of knowledge we have here and here is the best thing in the world, bits of knowledge are only worth something if shared with someone else yeah!
Now that you are rooted dont mess up with your phone eh!
---------- Post added at 10:47 ---------- Previous post was at 10:22 ----------
As I said earlier, I have no experience in A10 (Q) problems as I am not willing to jump in there staying on A9 (P).
A10 benefits is not worth the risks to me. The Anti-brick method is well explained in the Megathread I posted the link few posts earlier, however, it's for A9 only not A10.
Looking at the lists of bugs still present on A10, I really see no point running A10 atm. But well anyone does what pleases him/her he he
Good Luck!
Click to expand...
Click to collapse
I noticed that my cts profile is set to false....how to get this file true???
roberto_1986 said:
I noticed that my cts profile is set to false....how to get this file true???
Click to expand...
Click to collapse
It used to pass before, at least it was when I first installed it. Then google made some updates and it is not passing anymore. I am not an expert about that, but I know there are some threads where people are talking about this particular thing.
What is it useful for?
Muad.Dib said:
It used to pass before, at least it was when I first installed it. Then google made some updates and it is not passing anymore. I am not an expert about that, but I know there are some threads where people are talking about this particular thing.
What is it useful for?
Click to expand...
Click to collapse
certain game not working with the root thats why is important to have both profile setted to true!
so u too the first time got this cts profile to false and now is to true?
also when 1 profile is false mean something its gone wrong so i want to fix it
roberto_1986 said:
certain game not working with the root thats why is important to have both profile setted to true!
so u too the first time got this cts profile to false and now is to true?
Click to expand...
Click to collapse
roberto_1986 said:
also when 1 profile is false mean something its gone wrong so i want to fix it
Click to expand...
Click to collapse
I see.
No actually it was the other way around. When I first rooted in Feb it was passing both tests (green true).
Then one day after google made its changes it stopped working. But I only retro-graming so it is not so important for me.
Have you tried MagiskHide for the games you want to play with?
I cannot really help you with this further because I never tried to fix these myself not really needing to.
Anyway if you search Redmi Note 8 Pro forums you will see some other people are having the issue, at first I thought it was a A10 problem but probably is with the device.
Also you may found help in the telegram group REDMI NOTE 8 PRO OFFICIAL many gamers there I think.
Good luck and please let us know of your findings.
Muad.Dib said:
I see.
No actually it was the other way around. When I first rooted in Feb it was passing both tests (green true).
Then one day after google made its changes it stopped working. But I only retro-graming so it is not so important for me.
Have you tried MagiskHide for the games you want to play with?
I cannot really help you with this further because I never tried to fix these myself not really needing to.
Anyway if you search Redmi Note 8 Pro forums you will see some other people are having the issue, at first I thought it was a A10 problem but probably is with the device.
Also you may found help in the telegram group REDMI NOTE 8 PRO OFFICIAL many gamers there I think.
Good luck and please let us know of your findings.
Click to expand...
Click to collapse
well ty so much for everything u are awesome guy!