Related
i can not into FASTBOOT mode
why i press the search button connect the USB
i cant see the blue led and into the charging mode, blue light for two seconds, into orange LED
not find new hardware
just SEMC Mass Storage USB Drive
oh come im f**king dead
has been installed adb package
===============================
OKAY finally, I find the problem
bootloader unlock allowed: no
SIMLOCK
How do I into FASTBOOT mode
use testpoint? s1tool? for free? help me PLZ~
Are you sure you have all the correct drivers installed?
yes, but connect the USB did not prompt new hardware
No Worries...
You have me here,
first you should have ADB installed (adb package including fastboot)
second you should have SEUS (sony Ericsson Update service) and in some cases instead of SEUS you may have SE pc suite.
Turn off your phone,after 10 seconds turn it on again and connect the USB cable while holding back key.
simply extract adb package somewhere,navigate to that folder via CMD
Type:
fastboot devices
now there should be a connected device...:good:
Feel Free To Press My THX Button
peter_dizai said:
You have me here,
first you should have ADB installed (adb package including fastboot)
second you should have SEUS (sony Ericsson Update service) and in some cases instead of SEUS you may have SE pc suite.
Turn off your phone,after 10 seconds turn it on again and connect the USB cable while holding back key.
simply extract adb package somewhere,navigate to that folder via CMD
Type:
fastboot devices
now there should be a connected device...:good:
Feel Free To Press My THX Button
Click to expand...
Click to collapse
thanks man
i try it.
peter_dizai said:
You have me here,
first you should have ADB installed (adb package including fastboot)
second you should have SEUS (sony Ericsson Update service) and in some cases instead of SEUS you may have SE pc suite.
Turn off your phone,after 10 seconds turn it on again and connect the USB cable while holding back key.
simply extract adb package somewhere,navigate to that folder via CMD
Type:
fastboot devices
now there should be a connected device...:good:
Feel Free To Press My THX Button
Click to expand...
Click to collapse
i need adb package i cant find it
There you go!
metalbug said:
i need adb package i cant find it
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html
orion4000 said:
http://developer.android.com/sdk/index.html
Click to expand...
Click to collapse
not find new hardware
just SEMC Mass Storage USB Drive
oh come im f**king dead
has been installed adb package
You can't get into fastboot mode if your bootloader is locked.
Try doing a little searching in these forums. These questions have been asked and answered many times before.
Sent from my R800x using xda premium
He speaks the truth! Also, if youre simlocked too than theres no way to unlock for free. If youre not simlocked and youre not CDMA then you can just go on sonys site to unlock your bootloader. Otherwise you need to get your bootloader unlocked, which will run you ~$24, just use the goog.
metalbug said:
not find new hardware
just SEMC Mass Storage USB Drive
oh come im f**king dead
has been installed adb package
Click to expand...
Click to collapse
You Need to Unlock your Bootloader First then try to download and install the drivers for your device.. the main driver called (S1boot fastboot) here hopefully it would help you.. http://forum.xda-developers.com/showthread.php?t=1317531
orion4000 said:
You Need to Unlock your Bootloader First then try to download and install the drivers for your device.. the main driver called (S1boot fastboot) here hopefully it would help you.. http://forum.xda-developers.com/showthread.php?t=1317531
Click to expand...
Click to collapse
no man, you dont have my idea, my device dont have blue led, and dont find new hardware "S1 boot" just only "SEMC Mass Storage USB Drive"
Oh sorry!
metalbug said:
no man, you dont have my idea, my device dont have blue led, and dont find new hardware "S1 boot" just only "SEMC Mass Storage USB Drive"
Click to expand...
Click to collapse
Sorry brother i'm trying to help! i will look for more solutions for you!
orion4000 said:
Sorry brother i'm trying to help! i will look for more solutions for you!
Click to expand...
Click to collapse
thanks man, find only way it pay for unlock
True the only way to unlock you bootloader is to pay there is no "free" way. If you need your bootloader unlocked I recommend Alejandrissmo.
BL unlocked allowed no but Iam unlock it
netizenmt said:
You can't get into fastboot mode if your bootloader is locked.
Try doing a little searching in these forums. These questions have been asked and answered many times before.
Sent from my R800x using xda premium
Click to expand...
Click to collapse
Hey man ! Ive got an xperia play R800i and Iam unlock with the S1Tool and this is worked for me and my phone said BL unlocked allowed : NO , but i cant get into fastboot mod , but the flashtool said my bootloader status : ROOT and the S1Tool the same thing . Well i guess if the bootloader status isnt rootable , but if you unlock it , the FASTBOOT NOT GONNA WORK ......
netizenmt said:
You can't get into fastboot mode if your bootloader is locked.
Try doing a little searching in these forums. These questions have been asked and answered many times before.
Sent from my R800x using xda premium
Click to expand...
Click to collapse
well today i RElock my bootloader with Xperia_relock.ftf file with flash tool. i have the same probelm with the drivers. i cant enter fastboot. And now i want to unlock it again but how to do that if when we enter to fastboot, the device connect to flash mode can i unlock it?
Geodoomer said:
well today i RElock my bootloader with Xperia_relock.ftf file with flash tool. i have the same probelm with the drivers. i cant enter fastboot. And now i want to unlock it again but how to do that if when we enter to fastboot, the device connect to flash mode can i unlock it?
Click to expand...
Click to collapse
same here..any solution anyone?
Hello guys, first of all i wanna thank u for your work, i'm a new user but i follow you by a really some times. Today i decided to install the 4.2.1 ROM on my nexus, i deleted all internal file in recovery mode but now when i connect the telephone on pc it doesn't work, maybe because the usb debugging is off and now i don't have any rom on my cellular phone. The problem is that i can't browse my telephone because my pc don't recognize it. i tryed to install some usb driver but nothing has worked then i can put in the now or old rom. how i can solved this problem? Thank u ( and sorry for my english )
NexusPsy said:
Hello guys, first of all i wanna thank u for your work, i'm a new user but i follow you by a really some times. Today i decided to install the 4.2.1 ROM on my nexus, i deleted all internal file in recovery mode but now when i connect the telephone on pc it doesn't work, maybe because the usb debugging is off and now i don't have any rom on my cellular phone. The problem is that i can't browse my telephone because my pc don't recognize it. i tryed to install some usb driver but nothing has worked then i can put in the now or old rom. how i can solved this problem? Thank u ( and sorry for my english )
Click to expand...
Click to collapse
To enable USB debugging, go to settings>about phone>tap on the build number 7 times. It will tell you "you are now a developer" and your will have USB debugging back
As far as your driver issues go, it sounds like you only installed fastboot drivers and not the regular drivers. Or somehow the regular drivers got deleted. If it was me, I would try rebooting my computer and phone. If that doesn't work, run the driver setup wizard in the Galaxy Nexus Toolkit. The first part of that process is deleting old drivers. It does a very thorough walkthrough on how to do that.
rudeguy said:
To enable USB debugging, go to settings>about phone>tap on the build number 7 times. It will tell you "you are now a developer" and your will have USB debugging back
As far as your driver issues go, it sounds like you only installed fastboot drivers and not the regular drivers. Or somehow the regular drivers got deleted. If it was me, I would try rebooting my computer and phone. If that doesn't work, run the driver setup wizard in the Galaxy Nexus Toolkit. The first part of that process is deleting old drivers. It does a very thorough walkthrough on how to do that.
Click to expand...
Click to collapse
Thanks for the answer, the problem is that i don't have any rom on my telephone atm then i can't go to settings ecc. is there a way to change the usb debugging in recovery mode?
NexusPsy said:
Thanks for the answer, the problem is that i don't have any rom on my telephone atm then i can't go to settings ecc. is there a way to change the usb debugging in recovery mode?
Click to expand...
Click to collapse
so you are running stock 4.2.1?
Or...I guess I'm not understand what condition your phone is currently in.
NexusPsy said:
Thanks for the answer, the problem is that i don't have any rom on my telephone atm then i can't go to settings ecc. is there a way to change the usb debugging in recovery mode?
Click to expand...
Click to collapse
Try connecting your GNex to PC while in recovery mode then use ADB to push any ROM from PC to your /sdcard/ of your GNex in order to flash it.
At worst case, I think you can use a fastboot image to flash your GNex via fastboot.
rudeguy said:
so you are running stock 4.2.1?
Or...I guess I'm not understand what condition your phone is currently in.
Click to expand...
Click to collapse
Now i running nothing, pratically i formatted all internal data because i would use the 4.2.1 version that is on my pc, after the format the computer does not recognize my cellular phone, so atm i don't have any rom on my phone and now i don't know how i can solve that, it could be easy if i can browse the phone on computer
ahmadallica said:
Try connecting your GNex to PC while in recovery mode then use ADB to push any ROM from PC to your /sdcard/ of your GNex in order to flash it.
At worst case, I think you can use a fastboot image to flash your GNex via fastboot.
Click to expand...
Click to collapse
It works, thank u < 3
Windows 7 x64
Galaxy Nexus i515, BROKEN SCREEN, USB DEBUGGING WAS NOT TURNED ON. The phone is completely stock I just turned it on and used it until I broke my screen. Screen lock is on.
I have been trying to access my phone, using Fastboot, to wipe it before I send it in for warranty. I can not seem to do this at all. It seems that I can not install the drivers because I have not enabled USB debugging. Is this true? I have been following this guide : http://www.teamandroid.com/2012/07/30/how-to-set-up-adb-fastboot-with-android-sdk/2/ When i go to manually install the drivers, from SDK, I get, "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure that it is designed to work with Windows for x6-based systems." I then tried the driver from Samsung and got the same response.
So then I hold VOL+ _ VOL- and Power and tried to install the drivers for Fastboot with the same outcome as above. Also when I boot in Fastboot mode the drivers that are installed make my phone a modem. The driver is called, "SAMSUNG Mobile USB Modem." I can not get this to change.
So to summarize I can not get the ADB Drivers to install, because I do not have USB Debugging enabled, that in return will not allow me to install Fastboot Drivers because when I plug the phone in the computer sees it as a Modem.
Any suggestions? I am just trying to erase the info on my phone I have given up all hope of recovering any data.
Thanks,
qualm
USB debugging drivers/interface have nothing to do with fastboot drivers/interface. What's a screen lock?
a manta wrote this.
beekay201 said:
USB debugging drivers/interface have nothing to do with fastboot drivers/interface. What's a screen lock?
a manta wrote this.
Click to expand...
Click to collapse
I meant a screen pattern lock. When you wake up the screen you have to connect the dots in a certain pattern before your screen unlocks and you can use the phone.
As far as, USB debugging drivers/interface having nothing to do with fastboot drivers/interface, then what am I doing wrong? I can not get my computer to see my phone as an android device.
_qualm_ said:
I meant a screen pattern lock. When you wake up the screen you have to connect the dots in a certain pattern before your screen unlocks and you can use the phone.
As far as, USB debugging drivers/interface having nothing to do with fastboot drivers/interface, then what am I doing wrong? I can not get my computer to see my phone as an android device.
Click to expand...
Click to collapse
I know what a screen pattern lock is.
Uninstall all drivers, reboot pc.
Assuming device is off: press power+vol up+vol down, until you feel the vibration. Wait 2 secs or so. Device will be in fastboot mode.
Read this thread, i say again, READ this thread, obviously start with the first post! - http://forum.xda-developers.com/showthread.php?t=1812959
Thanks for the link. I read it and followed instructions for installing the drivers. Here is what I did:
1.Uninstalled all drivers
2.Rebooted my PC
3.Downloaded these Drivers, as suggested: http://forum.xda-developers.com/showthread.php?t=1379875
4.Followed these instructions, on how to install the driver without windows trying to find one automatically: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735
Everything seemed to go well under the Device Manager, when I plug my phone in in fastboot mode, it shows Android Phone -> Samsung Android Interface. This is way better than what I had before, when it was showing up as a Modem. Now when I try to use fastboot.exe and I type "fastboot devices" nothing shows up. I reset the computer and replugged in my device, in fastboot, and the same thing nothing shows up in fastboot.
Thanks for you help.
Did you miss the part about having to feed windows the same driver again, when connecting the device for the first time, in FASTBOOT MODE?
a maguro wrote this.
beekay201 said:
Did you miss the part about having to feed windows the same driver again, when connecting the device for the first time, in FASTBOOT MODE?
a maguro wrote this.
Click to expand...
Click to collapse
Not sure if I understand what your asking.
I followed all of the steps here: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735 I connected the phone booted normally and let windows find a driver so that the driver reads Portable Devices -> Galaxy Nexus. Then I unplugged the Nexus and booted it in fastboot mode and plugged it in. Next I followed the directions to install the Universal_Naked_Driver, in fastboot mode. I can not install the driver for ADB because I can not enable USB Debugging with my broken screen.
Thanks Again.
Why is it so difficult for people to understand that USB debugging has nothing to do with anything outside the booted OS?
Sent from my Galaxy Nexus
W8 a sec, do you even have your bootloader unlocked???
You said you're running stock, so that should have been my first question, because to unlock your bootloader through the usual way, you need to confirm a dialog on the device... which in your case, doesn't have a working screen.
_qualm_ said:
Not sure if I understand what your asking.
I followed all of the steps here: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735 I connected the phone booted normally and let windows find a driver so that the driver reads Portable Devices -> Galaxy Nexus. Then I unplugged the Nexus and booted it in fastboot mode and plugged it in. Next I followed the directions to install the Universal_Naked_Driver, in fastboot mode. I can not install the driver for ADB because I can not enable USB Debugging with my broken screen.
Thanks Again.
Click to expand...
Click to collapse
....
Lets see:
That post shows how it's done, correctly. (I think, from what i've read)
pay attention to part 3)
3)
NOTE:
- The method described here can be used to install the "Samsung Galaxy Nexus ADB Interface" driver as well as the "Samsung Galaxy Nexus Bootloader Interface" driver.
- Differences between the two procedures. One is done with the phone booted up normally and "USB Debugging" is enabled, and the other is done when the phone is in fastboot. I will cover the "USB Debugging" part here.
Click to expand...
Click to collapse
then...
We will now install the two drivers that efrant talked about in his post.
A) (FOR ADB - WHEN RUNNING ANDROID OS):
Enable USB debugging on your device
- Goto Settings > Developer Options > Check "USB Debugging"
- Connect device, manually update driver to Naked driver by 1wayjohny, done. On 4.2 and above, you'll need to confirm that you accept the host's (your pc) RSA key.
B) (FOR FASTBOOT - WHEN RUNNING FASTBOOT MODE)
boot into fastboot mode - power off phone and hold vol up + vol down + power
Click to expand...
Click to collapse
Both for A) and B), you need to do the "Update drivers manually" part!
Right now, your only option is B), that is to use fastboot to either:
- Flash stock images.
- To get your data back, boot a custom recovery (which won't require the RSA key confirmation for ADB) from fastboot, then use ADB to pull your /sdcard/ or whatever.
Pirateghost said:
Why is it so difficult for people to understand that USB debugging has nothing to do with anything outside the booted OS?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I am learning this ^. I am having trouble getting my computer to see my phone, in fastboot mode. All of the instructions that I have read start with installing drivers for ADB, which requires the phone to be USB debugging mode, and then the drivers for fastboot. So I thought my trouble was, since I can not install the drivers for ADB, and that I was having trouble with all of my drivers, that it was probably the fact that my phone can not be put into USB debugging mode. I now realize that USB debugging has nothing to do with fastboot, as fastboot is before the OS is booted. I am still just having trouble with my fastboot driver and seeing my phone with fastboot.exe.
beekay201 said:
W8 a sec, do you even have your bootloader unlocked???
Both for A) and B), you need to do the "Update drivers manually" part!
Right now, your only option is B), that is to use fastboot to either:
- Flash stock images.
- To get your data back, boot a custom recovery (which won't require the RSA key confirmation for ADB) from fastboot, then use ADB to pull your /sdcard/ or whatever.
Click to expand...
Click to collapse
No my bootloader is not unlocked. Is this the reason that my phone is not detected by fastboot.exe? Do I need to unlock my bootloader?
I have been trying option B, as I know this is my only option. I have been doing the "Update drivers manually" part I even tried on another PC with windows 7, to no avail. What ever I seem to do I can not see my device in fastboot.exe.
_qualm_ said:
No my bootloader is not unlocked. Is this the reason that my phone is not detected by fastboot.exe? Do I need to unlock my bootloader?
I have been trying option B, as I know this is my only option. I have been doing the "Update drivers manually" part I even tried on another PC with windows 7, to no avail. What ever I seem to do I can not see my device in fastboot.exe.
Click to expand...
Click to collapse
No. Fastboot should be able to see your device if the proper drivers are installed. Fastboot is REQUIRED to unlock the bootloader
Sent from my Galaxy Nexus
Pirateghost said:
No. Fastboot should be able to see your device if the proper drivers are installed. Fastboot is REQUIRED to unlock the bootloader
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
If you used odin to flash something, that will unlock the bootloader. Flashing a section of edited param using OMAP flash will also unlock the bootloader.
Beamed from my Maguro.
I also have the same problem with my galaxy C5.
_qualm_ said:
No my bootloader is not unlocked. Is this the reason that my phone is not detected by fastboot.exe? Do I need to unlock my bootloader?
I have been trying option B, as I know this is my only option. I have been doing the "Update drivers manually" part I even tried on another PC with windows 7, to no avail. What ever I seem to do I can not see my device in fastboot.exe.
Click to expand...
Click to collapse
My galaxy C5 is also not recognized as a bootloader interface while in fastboot mode, after installing all the drivers correctly. Samsung usb driver v1.5.63.0 makes the changes i think, and it makes it as a modem instead of bootloader. maybe the solution is i have to manually update the driver of that modem into bootloader, right click on the modem in device manager and change it's driver into bootloader of your phone, maybe it works. I will try it this way.
Let me know if this solution has worked for someone.
Thanks
I was trying to unlock my boot loader of my Xperia S. And everthing was ok.
But when I try to connect my phone on fastboot mode (connecting the USB while volume(+) is pressed) the computer recognize the device immediately how "qhsusb_dload". When disconnect the device after that, the phone only turn on with Power and Volumen(+) keys. After that, the phone still working ok, the problem only is present when try to connect to Fastboot mode. As extra information, I can connect the phone in download mode (connecting the USB while volume(-) is pressed) and the computer recognize the device how "S1 boot download".
I'm running on Windows 8.1 pro, also I try on Windows 7 professional, both of 64-bits.
Sorry for bad english, I speak spanish.
seams you didn't install the driver,searching in the unlock thread,there might be the drivers for this problem .http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
wxl104 said:
seams you didn't install the driver,searching in the unlock thread,there might be the drivers for this problem .http://www.theandroidsoul.com/how-to-unlock-bootloader-xperia-arc-play-neo-pro/
Click to expand...
Click to collapse
I used this tool to install abd and fastboot drivers http://forum.xda-developers.com/showthread.php?t=2588979 but the problem remains.
Too I used this tutorial step per step http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=33073341
But the phone always appears how"qhsusb_dload"
d4vid.pinz0n said:
I used this tool to install abd and fastboot drivers http://forum.xda-developers.com/showthread.php?t=2588979 but the problem remains.
Too I used this tutorial step per step http://forum.xda-developers.com/sho...tmctr=(not provided)&__utmv=-&__utmk=33073341
But the phone always appears how"qhsusb_dload"
Click to expand...
Click to collapse
I don't know,did you checked if your phone can unlock or not?
wxl104 said:
I don't know,did you checked if your phone can unlock or not?
Click to expand...
Click to collapse
Yes, I checked. I followed the instructions of "unlockbootloader.sonymobile.com/instructions" to check it and "Bootloader unlock allowed" says "Yes".
d4vid.pinz0n said:
Yes, I checked. I followed the instructions of "unlockbootloader.sonymobile.com/instructions" to check it and "Bootloader unlock allowed" says "Yes".
Click to expand...
Click to collapse
I don't know why,can you download pa-4.2 beta?I can't download it ,if ok,could you download it ,and send to me?
I already enabled OEM Unlock and USB Debugging in Developer options.
then I connected my LG G4 H811 to PC and confirmed MTP.
adb devices just shows:
List of devices attached
If I select USB charge instead of MTP, the adb devices shows:
List of devices attached:
LGH811***** offline
Looks like MTP mode adb cannot connect to H811 at all.
Does anyone know the reason? Really need to unlock bootloader and then root my phone.
Thanks
eruisi said:
I already enabled OEM Unlock and USB Debugging in Developer options.
then I connected my LG G4 H811 to PC and confirmed MTP.
adb devices just shows:
List of devices attached
If I select USB charge instead of MTP, the adb devices shows:
List of devices attached:
LGH811***** offline
Looks like MTP mode adb cannot connect to H811 at all.
Does anyone know the reason? Really need to unlock bootloader and then root my phone.
Thanks
Click to expand...
Click to collapse
its beacause your mobile's Debugging didnt alowed that usb connection. when u type 'adb device' there should be a popup on your device asking to connect to pc. choose Allow. it will be online hen.
Thanks for the reply!
But there is no popup on the phone when I type "adb devices". The only popup I see is when I connect PC and phone with USB, a popup on phone asks me "Allow this computer to access your phone data?" I choose "Yes"
Any help will be much appreciated.
eruisi said:
Thanks for the reply!
But there is no popup on the phone when I type "adb devices". The only popup I see is when I connect PC and phone with USB, a popup on phone asks me "Allow this computer to access your phone data?" I choose "Yes"
Any help will be much appreciated.
Click to expand...
Click to collapse
You need to enable USB debugging in developers options.
Sent from my LG-D801 using Tapatalk
bxlegend said:
You need to enable USB debugging in developers options.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I enabled OEM unlock and USB debugging both in Developer options.
eruisi said:
I enabled OEM unlock and USB debugging both in Developer options.
Click to expand...
Click to collapse
If all the checks boxes are ticked, try revoking USB debugging authorizations. Connect your device as MTP (try PTP as well) and try to adb devices again and see if you get the pop up on your phone. Last option would be to boot into recovery via button combo and reboot into the bootloader from there.
Sent from my LG-D801 using Tapatalk
I tried all of your suggestions, none of them work.
PTP/USB charging mode, adb devices shows:
List of devices attached:
LGH811***** offline
MTP shown no device attached...
I did get into download mode (bootloader mode I think) - screen says Firmware Update, do not unplug the USB connection until the process is complete
Then I tried to run fastboot oem unlock, it stucks at
< waiting for device >
and there is no change on phone screen.
Any other ideas? I really need to root my H811. Appreciate any suggestions!
Change to PTP mode.
Gesendet von meinem LG-H815 mit Tapatalk
It sounds like your usb drivers ars not properly installed. I would try uninstalling and then reinstall. Did you happen to install LG Bridge?
Sent from my LG-H811 using Tapatalk
eruisi said:
I tried all of your suggestions, none of them work.
PTP/USB charging mode, adb devices shows:
List of devices attached:
LGH811***** offline
MTP shown no device attached...
I did get into download mode (bootloader mode I think) - screen says Firmware Update, do not unplug the USB connection until the process is complete
Then I tried to run fastboot oem unlock, it stucks at
< waiting for device >
and there is no change on phone screen.
Any other ideas? I really need to root my H811. Appreciate any suggestions!
Click to expand...
Click to collapse
Download mode is not the recovery. If you have TWRP installed as your recovery, power your phone off completely and disconnect it from the computer. Then press and hold volume down and power. Keep holding and when you see the LG screen, release only the power button and press and hold it quickly again (you should still be holding volume down). This'll take you to the factory reset screen, select yes twice and you should be taken to twrp. REMEMBER, ONLY DO THIS IF YOU HAVE TWRP INSTALLED!
Sent from my LG-D801 using Tapatalk
I dont have TWRP installed
The phone is in initial state from factory and has been upgraded to MM 20O
eruisi said:
I dont have TWRP installed
The phone is in initial state from factory and has been upgraded to MM 20O
Click to expand...
Click to collapse
Ohh...follow the op in this thread.
Sent from my LG-D801 using Tapatalk
I followed all steps in the thread you list. I am stuck at "adb devices" where I didn't see my phone is listed if I connect with MTP mode. For USB charge or PTP, I see devices but it is offline.
With this problem, I cannot get my phone reboot into bootloader mode and run oem unlock/twrp.
eruisi said:
I followed all steps in the thread you list. I am stuck at "adb devices" where I didn't see my phone is listed if I connect with MTP mode. For USB charge or PTP, I see devices but it is offline.
With this problem, I cannot get my phone reboot into bootloader mode and run oem unlock/twrp.
Click to expand...
Click to collapse
Did you tried revoking the usb auth?
http://forum.xda-developers.com/g4/development/unlock-bootloader-h811-20o-t3459285/post68630578
Do you receive a popup afterwards when connecting the usb cable?
PTP or usb charge should be fine.
What OS are you running?
.
I am using Window10 on my PC.
I made a tiny progress: I installed LG Bridge software and it updated LG driver on my PC. Now when I connect phone to PC with USB (of course I choose "ALLOW" for popup USB Connection Allow this computer to accept your phone data?). Now I see devices under MTP mode but it is still offline so I cannot boot it into bootloader mode. There is no popup when I run adb devices.
I tried revoke USB auth a couple of time, no luck
Finally I made it work!
The reason is adb I was using is too old
I changed to 1.0.31 then it works w/o any issue.
Thanks for the help all the way! I really appreciate your patience.
eruisi said:
Finally I made it work!
The reason is adb I was using is too old
I changed to 1.0.31 then it works w/o any issue.
Thanks for the help all the way! I really appreciate your patience.
Click to expand...
Click to collapse
flash tt36 uss enterprise rom ots fast.
http://forum.xda-developers.com/tmobile-g4/development/t-mobile-lg-g4-h-811-mm-20o-tt10-uss-t3411769
I am having a different problem, i get to all these step but when I type fastboot oem unlock it gets stuck at waiting for device no matter how long i let it sit. I know there is no problem with adb because it shows the device with the serial number, I just can't unlock the boot loader
eruisi said:
Finally I made it work!
The reason is adb I was using is too old
I changed to 1.0.31 then it works w/o any issue.
Thanks for the help all the way! I really appreciate your patience.
Click to expand...
Click to collapse
OP @eruisi
Dont you know that this doesn't belong to the Android Development section?
Please be sensible and post in the right section and create threads only when it is actually required.
By using SEARCH and PM to other members...many things get solved with less and accurate results
Thread moved