Develop Bugs

[Q] Problem with jelly bean on Huawei u9200

Hi guys!
I had rooted u9200 on ICS firmware version B100, but I didn't manage to unlock bootloader to install CWM. So I decided to flash update 4.1.1 B508 offical beta firmware. I had to change build.prop to match the B508 version and I succesfully flashed 4.1.1 update. The problem now is that I can't root it. No way, I tried everything, not a chance. Also I can't downgrade because I have to change build.prop again to match the version I'm trying to downgrade to, but since I don't have root access I can't change build.prop. So now I'm stuck on unrooted beta version of 4.1.1.
Plese if anyone has any ideas and suggestions do not hesitate to write.

Out with the old, in with the new
So, I finally menaged to root 4.1.1 and to flash cwm. So now I flashed CM10 4.2.1 and it's working fine, but... When I go to settings/storage I can see my internal memory as "Internal storage" 2.14GB and I can see my sd card as "sd card" 29.78GB, but from any file menager I tried to use the situation is different, I see my internal storage as "sd card" and my real sd card is nowhere to be found, I can't access it from anywhere. The card is working fine, I tried it on my pc, and I used it to install this CM10 I'm on now.
Anyone with similar issues?

Please help me.
Tux2609 said:
So, I finally menaged to root 4.1.1 and to flash cwm. So now I flashed CM10 4.2.1 and it's working fine, but... When I go to settings/storage I can see my internal memory as "Internal storage" 2.14GB and I can see my sd card as "sd card" 29.78GB, but from any file menager I tried to use the situation is different, I see my internal storage as "sd card" and my real sd card is nowhere to be found, I can't access it from anywhere. The card is working fine, I tried it on my pc, and I used it to install this CM10 I'm on now.
Anyone with similar issues?
Click to expand...
Click to collapse
Hi,
I have the exact same problem and have been scouring the internet for answer.
I bought my P1 in Hongkong, so had a Hongkong stock B104 firmware, i used unlockroots software to unlock it successfully, but like you did not put any recovery on it, so have no way to flash a new rom or any recovery. i also like you edited the build.prop file using root explorer and flashed B508 (Jellybean).
1) Can you please tell me in a step by step guide how u managed to get CM10 & recovery on your phone & where u got the software etc.
2) I have backed-up my phone using Hisuite and Hicloud using cload software to the Internet & SD cards, will this be ok or will your procedure erase my SD card and will i be able to restore.
3) How would you rate CM10 compared to B508 firmware, is everything working as it should.
Your help would be much appreciated, and i would be extremely grateful.
Regards
Nil

nilbymouth said:
Hi,
I have the exact same problem and have been scouring the internet for answer.
I bought my P1 in Hongkong, so had a Hongkong stock B104 firmware, i used unlockroots software to unlock it successfully, but like you did not put any recovery on it, so have no way to flash a new rom or any recovery. i also like you edited the build.prop file using root explorer and flashed B508 (Jellybean).
1) Can you please tell me in a step by step guide how u managed to get CM10 & recovery on your phone & where u got the software etc.
2) I have backed-up my phone using Hisuite and Hicloud using cload software to the Internet & SD cards, will this be ok or will your procedure erase my SD card and will i be able to restore.
3) How would you rate CM10 compared to B508 firmware, is everything working as it should.
Your help would be much appreciated, and i would be extremely grateful.
Regards
Nil
Click to expand...
Click to collapse
Hi!
I used this guide to root, unlock bootloader and install cwm (I know the b508 is 4.1.1 but it worked for me): http://betanews.com/2012/11/13/how-to-root-android-4-2/
Download recovery image from here: http://www.mediafire.com/?pdaj3bohegu0vox
ROM is here (if you haven't found it already): http://forum.xda-developers.com/showthread.php?t=1930207
I don't know if you will be able to restore, but I don't see why not. I used titanium backup, you must be careful not to restore any system apps or settings. Also make a full backup from recovery before restoring because it's possible that it gets stuck on boot. Also it will not erase your SD card but it might be wise to use a clear one just in case.
I've been using this ROM for some time now and it works great. The only thing that bothers me is that video recording doesn't work, but I guess this will be solved in new versions.

Tux2609 said:
Hi!
I used this guide to root, unlock bootloader and install cwm (I know the b508 is 4.1.1 but it worked for me): http://betanews.com/2012/11/13/how-to-root-android-4-2/
Download recovery image from here: http://www.mediafire.com/?pdaj3bohegu0vox
ROM is here (if you haven't found it already): http://forum.xda-developers.com/showthread.php?t=1930207
I don't know if you will be able to restore, but I don't see why not. I used titanium backup, you must be careful not to restore any system apps or settings. Also make a full backup from recovery before restoring because it's possible that it gets stuck on boot. Also it will not erase your SD card but it might be wise to use a clear one just in case.
I've been using this ROM for some time now and it works great. The only thing that bothers me is that video recording doesn't work, but I guess this will be solved in new versions.
Click to expand...
Click to collapse
Hi,
Thank you ever so much, i will give this a go and let you know how it goes, by the way the link for the recovery image is not working, do you have any other links or know where or what i should be looking for.
Rgds

nilbymouth said:
Hi,
Thank you ever so much, i will give this a go and let you know how it goes, by the way the link for the recovery image is not working, do you have any other links or know where or what i should be looking for.
Rgds
Click to expand...
Click to collapse
Yeah, most links work for a short period of time.
Here, this is the one I use

Tux2609 said:
Yeah, most links work for a short period of time.
Here, this is the one I use
Click to expand...
Click to collapse
Thanks for that, the tutorial mentions putting the phone in to fastboot, i have tried holding vol up & down buttons with power, phone just reboots.
I saw others saying to first take the battery out, how the heck do you take the battery out of the Ascend P1 (U9200)?
Could you please tell me how you proceeded at this step, also do you have google play working on it?
Would i not be able to flash a recovery image on the phone using AndroidControl app, it has a tab for flashing recovery but did not want to try it without asking if you tried this method?
Thanks in advance.

nilbymouth said:
Thanks for that, the tutorial mentions putting the phone in to fastboot, i have tried holding vol up & down buttons with power, phone just reboots.
I saw others saying to first take the battery out, how the heck do you take the battery out of the Ascend P1 (U9200)?
Could you please tell me how you proceeded at this step, also do you have google play working on it?
Would i not be able to flash a recovery image on the phone using AndroidControl app, it has a tab for flashing recovery but did not want to try it without asking if you tried this method?
Thanks in advance.
Click to expand...
Click to collapse
Turn off the phone, hold the volume down button and then plug in the usb cable. This should turn the phone on and put it into fastboot.
After that just follow the instructions provided in the link above. I got a few error messages in the process but I proceeded with all commands and it worked.

Tux2609 said:
Turn off the phone, hold the volume down button and then plug in the usb cable. This should turn the phone on and put it into fastboot.
After that just follow the instructions provided in the link above. I got a few error messages in the process but I proceeded with all commands and it worked.
Click to expand...
Click to collapse
Have you tried AndroidControl as it seems to have all the files thats mentioned in the tutorial and makes flashing recovery supposedly easy, i wonder if it will work on an unrooted phone.

nilbymouth said:
Have you tried AndroidControl as it seems to have all the files thats mentioned in the tutorial and makes flashing recovery supposedly easy, i wonder if it will work on an unrooted phone.
Click to expand...
Click to collapse
I have and it didn't work for me. You can try it for yourself if you want to. But this tutorial is easy enough for everyone I think, you just type in the commands it says and that's it.

Tux2609 said:
I have and it didn't work for me. You can try it for yourself if you want to. But this tutorial is easy enough for everyone I think, you just type in the commands it says and that's it.
Click to expand...
Click to collapse
UPDATE: I was able to flash the recovery using AndroidControl, i installed the driver first in fastboot mode and then restarted the phone, while still connected to the pc i ran AndroidControl then chose the flashing tab and flashed the recovery using cwm touch recovery, and then flashed with supersu file you gave me, to give me root acess, all went fine and my phone is now rooted with cwm touch recovery.
I still have not upgraded to CM10 as i wanted to see how B508 will be with Google play now working. As i did not have a recovery mode which could flash zip from sdcard, i was unable to flash gapps zip, i have now flashed gapps and all is working fine.
What was the reason you changed to CM10 rom, was the beta version of B508 not very good for you, i would really like to know what the difference is before flashing another rom?
Thank you very much for your help & assistance and your prompt replies.
XDA develepors forum rocks.

nilbymouth said:
UPDATE: I was able to flash the recovery using AndroidControl, i installed the driver first in fastboot mode and then restarted the phone, while still connected to the pc i ran AndroidControl then chose the flashing tab and flashed the recovery using cwm touch recovery, and then flashed with supersu file you gave me, to give me root acess, all went fine and my phone is now rooted with cwm touch recovery.
I still have not upgraded to CM10 as i wanted to see how B508 will be with Google play now working. As i did not have a recovery mode which could flash zip from sdcard, i was unable to flash gapps zip, i have now flashed gapps and all is working fine.
What was the reason you changed to CM10 rom, was the beta version of B508 not very good for you, i would really like to know what the difference is before flashing another rom?
Thank you very much for your help & assistance and your prompt replies.
XDA develepors forum rocks.
Click to expand...
Click to collapse
Hi!
I'm glad to hear you made it. Why I use CM? Well, there really is no good answer to that. I was using CM on all my other phones too, I'm used to it, I like its speed and stability, I like look and feel and also I like it's additional options. That being said, there is one problem not with CM but with Jelly bean in general. Android 4.2 has a different directory structure, due to its new multiuser features. The problem with that is that you can't install apps on sd card and you can't use directory bind to bind data from sd card. So if you wish to play some games on your phone you will be limited by your phone's memory capacity. I hate this, I used to have a lot of big games on my phone and now I can't have more than two at the same time. At the moment I'm reverting back to 4.0.3 ROM just because of that, at least until theres some kind of solution or workaround for this.
Also theres nothing stopping you from playing with other ROM's. Just make a full backup in recovery and you can always go back to the ROM you find most suitable. In fact I would encourage you to download a few ROM's and try them out, see which one you like the most and which one suits your needs the best.

Tux2609 said:
Hi!
I'm glad to hear you made it. Why I use CM? Well, there really is no good answer to that. I was using CM on all my other phones too, I'm used to it, I like its speed and stability, I like look and feel and also I like it's additional options. That being said, there is one problem not with CM but with Jelly bean in general. Android 4.2 has a different directory structure, due to its new multiuser features. The problem with that is that you can't install apps on sd card and you can't use directory bind to bind data from sd card. So if you wish to play some games on your phone you will be limited by your phone's memory capacity. I hate this, I used to have a lot of big games on my phone and now I can't have more than two at the same time. At the moment I'm reverting back to 4.0.3 ROM just because of that, at least until theres some kind of solution or workaround for this.
Also theres nothing stopping you from playing with other ROM's. Just make a full backup in recovery and you can always go back to the ROM you find most suitable. In fact I would encourage you to download a few ROM's and try them out, see which one you like the most and which one suits your needs the best.
Click to expand...
Click to collapse
Thanks for your advice, you & this forum have been nothing short of brilliant, i myself is contemplating going back to ICS 4.0.3 as it also had the option to install apps on to the SD card, as it is my phone memory is almost full which makes even updating apps difficult as there's no more room to even do this.
I've tried certain apps like gemini app manager & driodsail to move apps to the SD card but none of these seem to work. I'm thinking of trying the official B226 firmware from Huawei just to see if it is ok, i know by doing this it will erase the root permissions, as i can't find a rooted version of this firmware and so will need to root again, but now that i have touch recovery on the phone it will be i presume easier to do this.
I hope they have made improvements on B226, because one of the reasons i actually upgraded to JB 4.1.1 was the sound from the stock google music player seemed low in comparison to JB where the sound was a lot better.
Do you think Huawei will release an official Jellybean firmware for this phone?
Any way thanks again, and keep in touch by letting me know how you got on, would be interested to know on what Rom and why and i shall also let you know on anything that i try or use.

Install apps on sd card, jelly bean 4.2
nilbymouth said:
Thanks for your advice, you & this forum have been nothing short of brilliant, i myself is contemplating going back to ICS 4.0.3 as it also had the option to install apps on to the SD card, as it is my phone memory is almost full which makes even updating apps difficult as there's no more room to even do this.
I've tried certain apps like gemini app manager & driodsail to move apps to the SD card but none of these seem to work. I'm thinking of trying the official B226 firmware from Huawei just to see if it is ok, i know by doing this it will erase the root permissions, as i can't find a rooted version of this firmware and so will need to root again, but now that i have touch recovery on the phone it will be i presume easier to do this.
I hope they have made improvements on B226, because one of the reasons i actually upgraded to JB 4.1.1 was the sound from the stock google music player seemed low in comparison to JB where the sound was a lot better.
Do you think Huawei will release an official Jellybean firmware for this phone?
Any way thanks again, and keep in touch by letting me know how you got on, would be interested to know on what Rom and why and i shall also let you know on anything that i try or use.
Click to expand...
Click to collapse
Hey!
I managed to solve the problem with low internal memory on 4.2. I partitioned my sd card with Mini tool partition wizard, made [fat32 ~16Gb] [ext4 ~ 14Gb], and then I used Mounts2SD app from google play to mount my ext partition as internal storage (Reversed Mount option in app). So far everything seems to be working just fine. (I tried the normal mount, just to move data folder to sd-ext but it didn't work).

Tux2609 said:
Hey!
I managed to solve the problem with low internal memory on 4.2. I partitioned my sd card with Mini tool partition wizard, made [fat32 ~16Gb] [ext4 ~ 14Gb], and then I used Mounts2SD app from google play to mount my ext partition as internal storage (Reversed Mount option in app). So far everything seems to be working just fine. (I tried the normal mount, just to move data folder to sd-ext but it didn't work).
Click to expand...
Click to collapse
Hey,
That's great news, i can't even download Mount2SD from google play as it keeps on saying i have insufficient space on internal storage. I have 255mb left surely this app is not bigger than that, so what could be the problem? as i cant even update existing apps. maybe something got messed up and it's either giving the wrong internal storage amount or something, as i was able to update apps from the google play as soon as i rooted and flashed gapps.zip. Now after that first lot i can't seem to download anymore apps or even update them as it's reporting as insufficient storage space and this is with even un-installing some apps. I may have to flash the firmware again to get rid of any crap that was in there and flash recovery/root & gapps as well.

mount sd-ext as internal storage
nilbymouth said:
Hey,
That's great news, i can't even download Mount2SD from google play as it keeps on saying i have insufficient space on internal storage. I have 255mb left surely this app is not bigger than that, so what could be the problem? as i cant even update existing apps. maybe something got messed up and it's either giving the wrong internal storage amount or something, as i was able to update apps from the google play as soon as i rooted and flashed gapps.zip. Now after that first lot i can't seem to download anymore apps or even update them as it's reporting as insufficient storage space and this is with even un-installing some apps. I may have to flash the firmware again to get rid of any crap that was in there and flash recovery/root & gapps as well.
Click to expand...
Click to collapse
Just try to do a full wipe and reflash the rom. I'm still using CM10.1 and it works great. (except the video recording still doesn't work). Be sure to flash the right version of gapps. You can partition your sd card before doing all this, you can even partition it with cwm but it supports the maximum size of 4Gb, so I used mini tool partition wizard (as I mentioned before). When you're done, install mounts2sd from google play, install scripts from there and choose reverse mount option, restart your phone and that should be it, your sd-ext partition is now mounted as internal storage. I strongly recommend class 10 sd cards for this, I'm using one myself and so far haven't experience any lag, even games work perfectly.

Tux2609 said:
Just try to do a full wipe and reflash the rom. I'm still using CM10.1 and it works great. (except the video recording still doesn't work). Be sure to flash the right version of gapps. You can partition your sd card before doing all this, you can even partition it with cwm but it supports the maximum size of 4Gb, so I used mini tool partition wizard (as I mentioned before). When you're done, install mounts2sd from google play, install scripts from there and choose reverse mount option, restart your phone and that should be it, your sd-ext partition is now mounted as internal storage. I strongly recommend class 10 sd cards for this, I'm using one myself and so far haven't experience any lag, even games work perfectly.
Click to expand...
Click to collapse
Thanks mate, i'll give that a go.
Just out of interest now that you have changed the format of your microsd card to ext4, is it still visible as a drive when you connect to the pc,or did you have another program in Windows to make them visible?

nilbymouth said:
Thanks mate, i'll give that a go.
Just out of interest now that you have changed the format of your microsd card to ext4, is it still visible as a drive when you connect to the pc,or did you have another program in Windows to make them visible?
Click to expand...
Click to collapse
Yes, if you connect it as MTP device it shows as u9200 device with two partitions: internal storage (which is sd-ext partition) and sd card.

Tux2609 said:
Yes, if you connect it as MTP device it shows as u9200 device with two partitions: internal storage (which is sd-ext partition) and sd card.
Click to expand...
Click to collapse
Will i loose my cwm touch recovery if i flash the rom again?

nilbymouth said:
Will i loose my cwm touch recovery if i flash the rom again?
Click to expand...
Click to collapse
No.

[ROM] [Lollipop 5.0] Stock AOSP

This is simply a stock AOSP otapackage build using the preview binaries from here https://developers.google.com/android/nexus/blobs-preview
Considering that Android L is not released and these are preview blobs you should understand that this may not be considered perfect as in there may be bugs (although i have not seen any)
Use my GAPPS otherwise **** will not work
You will lose twrp after installing this so you will need to reapply that afterwords… follow these instructions to a tee to get this working
I take no responsibility if you destroy your system , proceed at your own risk bla bla bla
Install… FOLLOW EXACTLY... I will know when you deviate and will not respond to messages for help afterwords
Copy gapps and ota to internal sdcard
Boot to twrp
Wipe data and system and cache via advanced (this must be done)
Install aosp_manta-ota-eng.kejar31.zip
Back to main menu
Select mount then unselect system (uncheck it)
Back to main menu
Install gapps-lp-20141106-signed.zip
reboot
Download
ROM - https://mega.co.nz/#!VZpgHTTa!_WYFnfmSm5aQAE3DyZ35x2PaRIzM-2U_nigqb6hlMEw
GAPPS - https://mega.co.nz/#!JdYCnSxZ!fn82nMs3mA0VdDBTYuguT9OXHjQtt7P9jnZUyndrtZA
if someone wants to host mirrors let me know.

Does this have the Wifi fix in it? or has Google not published that yet?

Can't wait to install this and try it. I was going to wait it out for the official release but I've broke I have to try it.
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
ChaosMinionX said:
Does this have the Wifi fix in it? or has Google not published that yet?
Click to expand...
Click to collapse
I don't think it will be as Google haven't released the version with the patch yet as that will be the OTA or factory image versions.

ChaosMinionX said:
Does this have the Wifi fix in it? or has Google not published that yet?
Click to expand...
Click to collapse
most likely not have not tested for any wifi bugs atm

Thank you I'm really excited about it. But I have a question. Can I have use my flash drives in this ROM without stickmount?

ROM
So is this a full-fledged ROM that I can install after wiping any ROM, or do I have to flash back to stock android 4.4.4 and then flash this??

I seem to be unable to install on my Nexus 10. I've followed the stages, but when I get to flashing the AOSP rom it stays on it forever!
I've updated my TWRP to v2.8.1.0 but it does the same thing.
Sorted the problem I think, some how the download I had on my Nexus was not a happy one haha. just on the boot logo now :3

Thank you, booted up and running. One question, I couldn't install Google+. It cannot be found on Play Store and installing from APK doesn't work neither.

Great work, thanks. Flashed about an hour ago, flawless so far!

seems my internal storage is not working ,I am not able to see any storage area, it gives an error. Might be a bad flash.

gabegom said:
So is this a full-fledged ROM that I can install after wiping any ROM, or do I have to flash back to stock android 4.4.4 and then flash this??
Click to expand...
Click to collapse
Same question here. Can we flash after any ROM or do we have to flash stock .imgs first then this?

Is anyone having problems with Wifi? I have flashed this twice and I cannot get Wifi to connect. It sees networks but won't connect to any of them.

ChaosMinionX said:
seems my internal storage is not working ,I am not able to see any storage area, it gives an error. Might be a bad flash.
Click to expand...
Click to collapse
internal storage is working here

Followed all the steps to the T, now it just boots up to the android logo and shuts down?
Anybody have the same problem?

chowynatt said:
Followed all the steps to the T, now it just boots up to the android logo and shuts down?
Anybody have the same problem?
Click to expand...
Click to collapse
For me it took a lot of time booting up, I was about to power it off and reinstall, but eventually it show the android logo and now is running well.

tavocabe said:
For me it took a lot of time booting up, I was about to power it off and reinstall, but eventually it show the android logo and now is running well.
Click to expand...
Click to collapse
Did you manage to install Google+?

kejar31 said:
This is simply a stock AOSP otapackage build using the preview binaries from here https://developers.google.com/android/nexus/blobs-preview
Considering that Android L is not released and these are preview blobs you should understand that this may not be considered perfect as in there may be bugs (although i have not seen any)
Use my GAPPS otherwise **** will not work
You will lose twrp after installing this so you will need to reapply that afterwords… follow these instructions to a tee to get this working
I take no responsibility if you destroy your system , proceed at your own risk bla bla bla
Install… FOLLOW EXACTLY... I will know when you deviate and will not respond to messages for help afterwords
Copy gapps and ota to internal sdcard
Boot to twrp
Wipe data and system and cache via advanced (this must be done)
Install aosp_manta-ota-eng.kejar31.zip
Back to main menu
Select mount then unselect system (uncheck it)
Back to main menu
Install gapps-lp-20141106-signed.zip
reboot
Download
ROM - https://mega.co.nz/#!VZpgHTTa!_WYFnfmSm5aQAE3DyZ35x2PaRIzM-2U_nigqb6hlMEw
GAPPS - https://mega.co.nz/#!lVYHAAjI!-478q0a5v6QAL9-6bDNzo7utJ1AXZD539CpTP6R63w8
if someone wants to host mirrors let me know.
Click to expand...
Click to collapse
So far so good! I'm in the setup... it's taking a long time checking my wifi connection.
edit:changing to 5ghz did the trick
edit2: after passing setup, changing back to 2.4ghz works just fine.

tavocabe said:
For me it took a lot of time booting up, I was about to power it off and reinstall, but eventually it show the android logo and now is running well.
Click to expand...
Click to collapse
Yeah all working now, took forever to boot, went black a few times and then started working.

Now the $64,000 Question: will it root?
because I've had my fun with it. And without root, I can't keep it. I doubt it can be, but I have to hope.

Flashed yesterday. My experience was as follow:
1) Dirty flash from PA, system erase command did t seem to work. After flashing it booted up all apps were there, 4.4 gapps were force closing.
2) Twrp advance factory reset and erase. normal flash afterwards with gapps 5.0. Setup wizard crash. Couldn't get past that error.
3) Factory 4.4 image. Complete erase, and flash to L, boot up and then TWRP and gapps flash. Tablet booted correctly and works since then.
Regarding the WiFi battery drain bug:
No issue here. Battery drain when idle is a flat line. No misc group with excessive battery is listed in the battery stats.
Further more performance is great, basic apps seem to work correctly. Haven't gotten much into detail.
Regarding the G+ question. It works fine.

sd card and gapps6 problem on cm13

i was running cm12 with no probs on htc one m9
then by mistake i installed the new update and it was cm13.
after the phone rebooted i got google play error saying i need to update google play.
downloaded the latest gapps6 but when trying to install in recovery mode from internal phone memory (as sd card for some reason is not mounted anymore) it gives an error E: FAILED TO MAP
is there a way to go back to cm12 or fix these faults on cm13?

Linx78 said:
i was running cm12 with no probs on htc one m9
then by mistake i installed the new update and it was cm13.
after the phone rebooted i got google play error saying i need to update google play.
downloaded the latest gapps6 but when trying to install in recovery mode from internal phone memory (as sd card for some reason is not mounted anymore) it gives an error E: FAILED TO MAP
is there a way to go back to cm12 or fix these faults on cm13?
Click to expand...
Click to collapse
Install gapps immediately after rom installation, do not allow a full boot..
There is also an issue with the SD and the way it's read, this is an android M issue.

dladz said:
Install gapps immediately after rom installation, do not allow a full boot..
There is also an issue with the SD and the way it's read, this is an android M issue.
Click to expand...
Click to collapse
that's the problem, i didn't realize it's cm13 (thought it's another cm12 nightly) till rebooted the phone...
now it won't allow me to install anything at all giving that e: map... error.

Linx78 said:
that's the problem, i didn't realize it's cm13 (thought it's another cm12 nightly) till rebooted the phone...
now it won't allow me to install anything at all giving that e: map... error.
Click to expand...
Click to collapse
Ask in the forum mate, where u got the rom from.

dladz said:
Ask in the forum mate, where u got the rom from.
Click to expand...
Click to collapse
i'm really sorry if i posted in wrong place... (please direct me in the wright way)
the rom itself was downloaded automaticaly on the phone as an update and i pressed the option update, so the phone rebooted itself into recovery installed it and then i rebooted the phone myself not even looking what was installed... the rest you already know...

Linx78 said:
i'm really sorry if i posted in wrong place... (please direct me in the wright way)
the rom itself was downloaded automaticaly on the phone as an update and i pressed the option update, so the phone rebooted itself into recovery installed it and then i rebooted the phone myself not even looking what was installed... the rest you already know...
Click to expand...
Click to collapse
You will have to have downloaded the rom from xda surely? The Rom you downloaded initially I assume was cm 12.1, then you updated to cm 13, that thread is in the original android development section, I'm sure you can find your way there as you've been there before. The thread is now called cm13 I believe..
Also make sure you're on the latest TWRP recovery, I'm guessing you are but it'd be nice to be sure.
Might also be worth downloading G apps from the cm13 thread then rebooting to recovery, flashing the rom again and installing gapps whilst once complete, don't allow a reboot.
Wiping cache and dalvic will be fine, don't perform a full wipe just incase you can't install the rom again.
If you get stuck, you can push files to your phone using recovery and the push command..
Not 100% but I think storage works via TWRP, could be wrong about that and I've not tested it with cm13.
Either way you have a way back..
---------- Post added at 06:55 PM ---------- Previous post was at 06:55 PM ----------
Install from your internal memory not your SD card. Get the necessary files on your internal memory instead.

thank you very much, will try there.
yes, you are right, got rom from xda and i'm on latest recovery, but no matter what i do, even after wiping cashe still getting the bloody
E: failed to map file
Installation aborted

Linx78 said:
thank you very much, will try there.
yes, you are right, got rom from xda and i'm on latest recovery, but no matter what i do, even after wiping cashe still getting the bloody
E: failed to map file
Installation aborted
Click to expand...
Click to collapse
i can't post anything there... not enough posts...
did i brick my phone now? or is there a way to clean install? recovery mode won't work...

Linx78 said:
i can't post anything there... not enough posts...
did i brick my phone now? or is there a way to clean install? recovery mode won't work...
Click to expand...
Click to collapse
No it'a not bricked..
Are you installing from internal or external memory?
Connect your phone to your computer and go to recovery, then mount storage in recovery, copy G apps to internal memory.
Make more posts in here, i think you need ten

I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Also I tried to flas Gapps just after installing MM (not reboot and with Aroma) and the installation freezes, so im stuck with pure Android no Google Apps, so I did return to Lollipop VipeOne 3.5.0 with a full backup made with TWRP.

Sorted. Avoid it til it'a fixed like me unless you want to be a Guinea pig.

dladz said:
Sorted. Avoid it til it'a fixed like me unless you want to be a Guinea pig.
Click to expand...
Click to collapse
sorry, i did copy everything onto internall memory, still no luck...
also the cm13 updated the recovery aswell, and i can't even do a factory reset...
please is there a way to go back to cm12.1?
once again i can't install anything in recovery mode.

Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.

dladz said:
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
Click to expand...
Click to collapse
that wasn't my post, some else posted here too...
i'm stuck, adb won't install anything too

LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Also I tried to flas Gapps just after installing MM (not reboot and with Aroma) and the installation freezes, so im stuck with pure Android no Google Apps, so I did return to Lollipop VipeOne 3.5.0 with a full backup made with TWRP.
Click to expand...
Click to collapse
i wanted to ask how to go back to cm12.1 from cm13?
i don't have any backups, nor my recovery is allowing to install anything as per post above...
adb method is not working either, just says waiting for the device when rebooted to download and nothing else.
also my firmware is 2.10..... is that an issue?

dladz said:
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
Click to expand...
Click to collapse
i also tried install recovery through adb, didn't work, just says waiting for the device and nothing happens

Linx78 said:
i also tried install recovery through adb, didn't work, just says waiting for the device and nothing happens
Click to expand...
Click to collapse
Nah i'm on 2.10 that's fine.
At this point it appear to be an issue with CM13 rather than anything else, I'm not up to speed with Android 6.0 so I think it would be best if you asked in the thread, you've made over 10 posts now so i'm assuming you can post there.
See what they say, let them know what you've done so far, someone will have either been through it or will know what to do.
Sorry i can't be of more help mate.
PS: Just thought of something, if you have connectivity to your computer / laptop, update your recovery if you haven't already, chances are it's an issue with cm13 but might be worth a try.

I had similar problem - Google Services crashing after unintentional update to CM13.
I realized that I need to install new GApps to fix the issue but GApps installation in recovery was constantly failing.
I used to have some recovery there, I even don't know which one, but during update to CM13 the recovery has been changed to some kind of CM recovery.
After installing TPRW recovery (ir forked for me from the TPRW Manager App from play store) I was able to install Nano GApps.
It solved the issue with Google Services crashing, now I got some Wizard crashing. The issue with crashing wizard is solved by going to privacy setting and allowing the wizard all rights. Later I realized that many other applications were crashing on start as well. I solved it for each of them by uninstalling and installing from Play Store again.

Updated Working Twrp for Moto E5 Plus Hannah

I made this so let me know if it works I tested it on my phone and my girlfriends phone it's for the Hannah varient which is MetroPCS/T-Mobile this was my first ever project I updated it today try out the new one
twrp by SIR KRIEGER and decrypting files credits go out to authors of those files
https://drive.google.com/folderview?id=105qE_sXIiCF2W9IffzSMpfFUXQc7N-dz

sirkrieger1993 said:
I made this so let me know if it works I tested it on my phone and my girlfriends phone it's for the Hannah varient which is MetroPCS/T-Mobile this was my first ever project ill be updating g the version tomorrow to the newest twrp source
twrp by SIR KRIEGER
https://drive.google.com/file/d/1ylBbg4gZt4tXGz-EBnrYtcO9AjXA2qNv/view?usp=drivesdk
Click to expand...
Click to collapse
yes it seems to not work at 1st on first boot! doesnt detect storage 0mb
but when i hit wipe/advanced wipe/data then
hit repair change file system then hit change file system
to ext2 then back ext2
it detects internal storage
but when i booted into android it wanted to encrypt data and wipe it.
so i manually wiped data in recovery then rebooted an bam it works
an it still detects my internal storage........yay thank you so much
it just doesnt detect my micro sd card

brandonlee96 said:
yes it seems to not work at 1st on first boot! doesnt detect storage 0mb
but when i hit wipe/advanced wipe/data then
hit repair change file system then hit change file system
to ext2 then back ext2
it detects internal storage
but when i booted into android it wanted to encrypt data and wipe it.
so i manually wiped data in recovery then rebooted an bam it works
an it still detects my internal storage........yay thank you so much
it just doesnt detect my micro sd card
Click to expand...
Click to collapse
I'll look into trying to fix it but my SD card words so that's weird

Ok so I tried it on another friend of mines phone and his sd card and everything is working fine so I'm really confused why yours wouldn't work????

Me too I really don't understand it.

I'll keep looking into it for you...I wish other people would let me know how it's working on there device

I didn't realize people were still having issues with twrp on the tmo/Metro variant. Id have to double check with Aeorsyn but im pretty sure we posted one somewhere in this forum that works...at least for me...perfectly with the exception of the time being off every now and then. It flashes zip and image files, makes backups, restores, wipes, works with twrp themes, reads internal and external sd, and even usb via otg. I've been running it for a couple months now without issue. Is there something im missing that people are trying to do that I'm just blind too? Lol if anyone wants a link to the twrp I'm using just lemme know.
Sent from my Motorola moto e5 plus using XDA Labs

theUsualSuspexx said:
I didn't realize people were still having issues with twrp on the tmo/Metro variant. Id have to double check with Aeorsyn but im pretty sure we posted one somewhere in this forum that works...at least for me...perfectly with the exception of the time being off every now and then. It flashes zip and image files, makes backups, restores, wipes, works with twrp themes, reads internal and external sd, and even usb via otg. I've been running it for a couple months now without issue. Is there something im missing that people are trying to do that I'm just blind too? Lol if anyone wants a link to the twrp I'm using just lemme know.
Click to expand...
Click to collapse
Please

I tried the one that was posted and I couldn't flash anything so I tried the James varient but I couldn't flash it I had to fastboot boot it

theUsualSuspexx said:
I didn't realize people were still having issues with twrp on the tmo/Metro variant. Id have to double check with Aeorsyn but im pretty sure we posted one somewhere in this forum that works...at least for me...perfectly with the exception of the time being off every now and then. It flashes zip and image files, makes backups, restores, wipes, works with twrp themes, reads internal and external sd, and even usb via otg. I've been running it for a couple months now without issue. Is there something im missing that people are trying to do that I'm just blind too? Lol if anyone wants a link to the twrp I'm using just lemme know.
Sent from my Motorola moto e5 plus using XDA Labs
Click to expand...
Click to collapse
Please ! , Thanks & Merry XMas!

Twrp deletes stock rom
Maybe you can help me out, maybe im missing something. I have the g5 (hannah) MetroPCS variant. Everytime I flash TWRP it deletes my system. Ive tried 3 other TWRPs with no luck. One way or another I cannot boot, (bad key). Then I reflash my stock rom and try again. Ive tried with and without allowing system modifications with no avail. However when I first flash and boot into recovery there is a screen asking to decrypt. it asks to enter a password but the screen doesnt respond to touch for the pattern dots. Does that decrypting need to happen for TWRP to work correctly? Thanks

scaicardi said:
Maybe you can help me out, maybe im missing something. I have the g5 (hannah) MetroPCS variant. Everytime I flash TWRP it deletes my system. Ive tried 3 other TWRPs with no luck. One way or another I cannot boot, (bad key). Then I reflash my stock rom and try again. Ive tried with and without allowing system modifications with no avail. However when I first flash and boot into recovery there is a screen asking to decrypt. it asks to enter a password but the screen doesnt respond to touch for the pattern dots. Does that decrypting need to happen for TWRP to work correctly? Thanks
Click to expand...
Click to collapse
dm me, I have a working twrp build and stock system image on google drive

scaicardi said:
Maybe you can help me out, maybe im missing something. I have the g5 (hannah) MetroPCS variant. Everytime I flash TWRP it deletes my system. Ive tried 3 other TWRPs with no luck. One way or another I cannot boot, (bad key). Then I reflash my stock rom and try again. Ive tried with and without allowing system modifications with no avail. However when I first flash and boot into recovery there is a screen asking to decrypt. it asks to enter a password but the screen doesnt respond to touch for the pattern dots. Does that decrypting need to happen for TWRP to work correctly? Thanks
Click to expand...
Click to collapse
Did you try using the decrypt.zip

sirkrieger1993 said:
Did you try using the decrypt.zip
Click to expand...
Click to collapse
No I have not...I will try and find a copy.

sirkrieger1993 said:
Did you try using the decrypt.zip
Click to expand...
Click to collapse
I used Sir's (THANKS!) twrp and just booted it without flashing,(worked great!) it boots fine but asks for unlock pattern and doesn't accept the one I have set, (I'm guessing this is where decrypt.zip comes into play, but unsure), I hit cancel and KEPT READ ONLY , then made individual backups of boot + system + system.image
I also get the Bad key however I believe this is normal after unlocking the bootloader.. If you wait a bit it should still eventually boot.. I'd like to try to make a boot animation..

scaicardi said:
No I have not...I will try and find a copy.
Click to expand...
Click to collapse
turns out its not deleting the rom. its a problem with the boot image or encryption . When i first boot into twrp i cannot see internal storage. if i change my partition from ext4 then back to ext2 it shows up and the decrypt.zip is successful. however when i reboot phone it hangs at motorola screen. I then went back to fastboot and flashed stock boot.img and the phone almost booted up. I got hung at decryption unsuccessful perform factory reset. I dont know why this is so complicated any suggestions.

kinda sucks i go in for surgery and wake up and find a new twrp for hannah good luck ill be deleting my guide instead of working on twrp bye

Good to see work being done on the device!

skullkid383 said:
kinda sucks i go in for surgery and wake up and find a new twrp for hannah good luck ill be deleting my guide instead of working on twrp bye
Click to expand...
Click to collapse
Bro no keep it up don't hurt to have two twrps that worrk for are device

Project89Odin said:
Good to see work being done on the device!
Click to expand...
Click to collapse
Thanks bro I got a few gsi ROMs to boot up and work also to I'll post a thread soon on which ones I got working so there's more custom ROMs that work

How to install LineageOS on the Mi 10T Lite

Hey guys, if you're a noob or you haven't flashed a custom ROM to an android device since the likes of the Galaxy S2 like me, this guide is made for you!
Disclaimer: I am by no means taking credit for any links posted, credits to the creators of anything mentioned! And a special thank you to the creators of the TWRP and the ROM, hopefully development will grow for such an awesome device! I am not responsible if you brick your device (by not following my tutorial :/)
The only complaints I have about this ROM is the camera quality but install the GCAM port for the Mi10T Lite, it may help!
You will need:
A Mi10T Lite (duh) or any other supported device with MIUI Installed (Android 10)
A SD card
A laptop with fastboot installed ( [OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 | XDA Developers Forums (xda-developers.com) )
A Mi account
TWRP (https://www.mediafire.com/file/qaea...0I_3.5.A10_05-01-2021_BL-L-fixsdcard.img/file)
The ROM (https://forum.xda-developers.com/t/rom-unofficial-10-0-gauguin-lineageos-17-1.4224633/)
GApps (I used this one: Download NikGapps from SourceForge.net)
B*lls
First (Ignore this if you already unlocked your bootloader):
Download MiFlash_Unlock (http://miuirom.xiaomi.com/rom/u1106245679/4.5.813.51/miflash_unlock-en-4.5.813.51.zip)
Make sure you have a Mi account and a SIM
Go to settings, enable developer options
Once you have done this, go to developer options (additional settings, scroll down)
Enable OEM Unlocking
Enable USB Debugging (not sure if this is necessary but I like to have it enabled anyway)
Click on Mi Unlock status and add your account, remember your details! (You may need to sign out and sign back in again)
It should say account linked to device successfully or something along those lines
Grab a cable (the included cable worked for me but other cables didn't)
OPTIONAL: YOU MAY WANT TO BACK UP ALL OF YOUR DATA
Open MiFlash_Unlock which you previously downloaded and connect your phone in fastboot mode (if it doesn't show up follow this tutorial: Fixed: Fastboot not detecting your Android device (qasimtricks.com) )
Click on unlock device! It should automatically reboot when it's done
Complete the set-up process, input your Mi account details and you should be good to go!
Enable developer options again and enable USB debugging
Installing TWRP (Ignore this if you already have TWRP installed!):
Turn off your device and boot into fastboot, connect and verify that it is connected by opening command prompt then typing "fastboot devices", it should show up
Point command prompt to the folder where your TWRP is downloaded (if it is located in downloads, type cd c:/users/(your username)/downloads
Then type fastboot flash recovery "twrp".img (replace "twrp" with the name of the recovery installed)
It should say successful, then type fastboot reboot and hold volume up + power
You've booted into TWRP! Hooray!
If it asks for the password to decrypt put it in, if it doesn't then no worries
You will notice that your internal storage is encrypted, not to worry!
Installing the ROM:
Connect your phone to your laptop (it can be in TWRP) and move the ROM to your SD card
Boot into TWRP if you haven't already, click wipe, advanced wipe and wipe Dalvik Cache/ART, Data and Cache
Once this has completed, go to install, then change the storage to SD Card
Locate the ROM file and swipe to flash!
Once the flash has completed, DO NOT REBOOT
Go to wipe and click format data, then type yes
Reboot to system! Done!
Installing GApps (Optional):
Move the GApps file provided to your phone
Boot to TWRP
It will prompt you to enter your passcode, this will decrypt the internal storage!
Click on install and locate GApps, swipe and flash!
Reboot
Congratulations! You have installed the first custom ROM made specifically for the device You can install Magisk if you want, I'm in the UK and my metro bank app didn't work but by using Magisk hide and changing the name of the Magisk manager everything worked (hide every Google app)
Enjoy! I hope you found this useful

thanks, after installing it can i go back to stock with locked bootloader?

jeuxtype said:
thanks, after installing it can i go back to stock with locked bootloader?
Click to expand...
Click to collapse
yes you can using xiaomi flash tool

Might want to confirm when to install gapps as if it's done after a boot it's not going to work!

Chari69 said:
yes you can using xiaomi flash tool
Click to expand...
Click to collapse
so it's safe to flash lineage, i want to use it but i need to get back to stock to watch netflix and for google pay?

jeuxtype said:
so it's safe to flash lineage, i want to use it but i need to get back to stock to watch netflix and for google pay?
Click to expand...
Click to collapse
Yes its safe, download the stock fastboot ROM online and use miFlash as mentioned, before you start flashing make sure the setting at the bottom right of the app is set to wipe + lock, I've already done it once and it worked fine

benfleet5 said:
Might want to confirm when to install gapps as if it's done after a boot it's not going to work!
Click to expand...
Click to collapse
Hey, that's awfully weird. When I tried flashing alongside the ROM I kept getting an error, but after I booted and done initial set up and tried installing it worked fine

Good guide a++++

deanlee121 said:
Good guide a++++
Click to expand...
Click to collapse
Thanks Dean!

Google pay works on this?

Xts7 said:
Google pay works on this?
Click to expand...
Click to collapse
Yeah just changed the magisk package name, enabled magisk hide and used gpay sqlite fix and it was all working. Metro Bank worked too

The only thing I'd say is that Open GApps Micro is the package you want to install; anything larger won't fit in the system partition - you get an Error 70! JT

jdtanner said:
The only thing I'd say is that Open GApps Micro is the package you want to install; anything larger won't fit in the system partition - you get an Error 70! JT
Click to expand...
Click to collapse
Hey, I've just been made aware that that works too, but NikkGapps also works! Also, ArrowOS comes pre-built with GApps and it's better imo, only thing is bluetooth audio doesn't work and the speaker crackles occasionally.

fizzy900 said:
Hey, I've just been made aware that that works too, but NikkGapps also works! Also, ArrowOS comes pre-built with GApps and it's better imo, only thing is bluetooth audio doesn't work and the speaker crackles occasionally.
Click to expand...
Click to collapse
Waiting until these bugs are sorted before trying that ROM. Bluetooth and general audio are fairly important to me

jdtanner said:
Waiting until these bugs are sorted before trying that ROM. Bluetooth and general audio are fairly important to me
Click to expand...
Click to collapse
Same somewhat lol, its annoying but thank God my headphones have a 3.5mm jack too!

Thanks for the guide, I recently got a redmi note 9 pro 5g from chinaland shipped to the uk then followed this guide pretty much, but instead of going twrp and lineage I went Orangefox and Arrow OS
I wasn't sure how all would go so was grateful of the guide as my first flashing on the new beasty..
I used this guide + info from the arrow thread before I jumped in..
just for info's it worked flawlessly
Steps I did
1. Unlocked bootloader ofcourse
2. installed Orangefox via fastboot
3. flashed latest version of china android 10 from sdcard (no reboot)
4. flashed arrow OS android 11 from sdcard
5. wiped data
To my amazement it booted first go and real fast like in under 5min!
can somebody explain why we need to wipe data after flashing ? surely wiping data means wiping ? but I guess it is not somehow wiping the good flash data..?
Where does all the data go when I flashed the first chinarom and why is it required to flash chinarom first ?
I have one bug bar the odd crackle, has anyone else noticed keyboard issues ? When i type sometimes it shows up backwards
ie google will appear as elgoog ?
I tried swiftkey keyboard + changing languages still the issue persists..
Thanks again @ Fizzy900

Jonny5isalivetm said:
Thanks for the guide, I recently got a redmi note 9 pro 5g from chinaland shipped to the uk then followed this guide pretty much, but instead of going twrp and lineage I went Orangefox and Arrow OS
I wasn't sure how all would go so was grateful of the guide as my first flashing on the new beasty..
I used this guide + info from the arrow thread before I jumped in..
just for info's it worked flawlessly
Steps I did
1. Unlocked bootloader ofcourse
2. installed Orangefox via fastboot
3. flashed latest version of china android 10 from sdcard (no reboot)
4. flashed arrow OS android 11 from sdcard
5. wiped data
To my amazement it booted first go and real fast like in under 5min!
can somebody explain why we need to wipe data after flashing ? surely wiping data means wiping ? but I guess it is not somehow wiping the good flash data..?
Where does all the data go when I flashed the first chinarom and why is it required to flash chinarom first ?
I have one bug bar the odd crackle, has anyone else noticed keyboard issues ? When i type sometimes it shows up backwards
ie google will appear as elgoog ?
I tried swiftkey keyboard + changing languages still the issue persists..
Thanks again @ Fizzy900
Click to expand...
Click to collapse
Hey bro, nice glad you enjoyed! So you have to format data after flashing a custom ROM from what I know in order to remove encryption, if you don't it'll show your internal files in a strange way and if you further tinker with it and do something it might stop you from installing apps full stop (happened to me cause I was being a tw*t lol). You need to flash the latest stock firmware (if the ROM requires you to) so you get the latest vendors which work with the custom ROM, although I believe there is a method to just flash vendor images themselves (fastboot flash vendor nameofvendorfile.img).
Yeah so arrowOS has notification crackles for some reason, most of the bugs are audio related (BT audio doesn't work either).
My typing was backwards too sometimes, it's because you're touching the fingerprint slightly which goes to the first element on a page or something (when you're typing it goes to the start of the box where you enter text). To understand what I mean go onto your launcher and tap the fingerprint scanner, it should highlight something.
I just flashed dotOS from arrow, works a charm! No audio related bugs afaik and BT audio works (lifesaver, phew).
Any other questions feel free to drop me a message on Telegram, @stillw0rking.
Take care! Also how in the world did you import the device from China hahahaha

epic fast reply!
<3
ahha the fingerprint!! I was wondering why I got random white box appearing on my home screen (and at random times) can it be disabled ?
So we got another rom already lol how excellent, I would like a rom that is stripped to the bone so we can install what we like, aka the least amount of crap running in the backround the merrier I am
Yea I just ordered from one of the china phone shops, got a note 9 pro 5g for £ 211 including postage, when I saw the price I just had to buy even tho my trusty oneplus 3t is still fine but but had the upgrade bug hehe, was from giztop, risked the custom charge and succeeded haha
Finally thanks for explaining the Encryption bit, yes I did read that but it seemed to go in one ear...
Guessing you are on the mainland somewhere, Greetings from across the pond

Jonny5isalivetm said:
epic fast reply!
<3
ahha the fingerprint!! I was wondering why I got random white box appearing on my home screen (and at random times) can it be disabled ?
So we got another rom already lol how excellent, I would like a rom that is stripped to the bone so we can install what we like, aka the least amount of crap running in the backround the merrier I am
Yea I just ordered from one of the china phone shops, got a note 9 pro 5g for £ 211 including postage, when I saw the price I just had to buy even tho my trusty oneplus 3t is still fine but but had the upgrade bug hehe, was from giztop, risked the custom charge and succeeded haha
Finally thanks for explaining the Encryption bit, yes I did read that but it seemed to go in one ear...
Guessing you are on the mainland somewhere, Greetings from across the pond
Click to expand...
Click to collapse
Haha yes I'm from near London! You must be the first English person I've actually bumped across on XDA ever lol. Aah yes, as far as I know it can't be disabled, it'll be stuck w that until the dev fixes it... ROMs have started to release quite quickly for the phone ever since the mi10i got dropped thank God, hopefully this is a good sign!
DotOS seems to be pretty light, heavy on the customizing side but when I started from fresh I had the basic google apps but gmail wasn't even installed lol. Dot is giving me the same sort of sot as Arrow, so really its up to you, but if the BT audio bug is a major thing for you (thank God one of my headphones can be used with a 3.5mm jack too lol) then I'd recommend Dot, but otherwise they're both extremely similar in terms of performance
And I was gna try and order the mi9T Pro like that but didn't bother, read some bad stories lol.
And no worries But yeah I'm pretty sure that is all it is, when you modify /system or something, the internal storage encrypts so you can't access it on stock ROM with TWRP but with custom you can decrypt easily
Take care mate!

Does lineage for mi 10t lite support 120 hz on screen ? Is it adaptive or locked?